installation and user instructions electric fryer models lsf
Contents
1. LYNA 4 INSTALLATION AND USER INSTRUCTIONS ELECTRIC FRYER MODELS LSF LDF LDF2 AND LFF Dear Customer Thank you for purchasing this Lincat Product This is just one of over 400 different items of catering equipment available from our range which is constantly being extended and improved Details are available from your local distributor or direct from us Used for the purposes for which it is intended and with careful maintenance as outlined in this user Guide your Lincat product will give years of trouble free use IMPORTANT INFORMATION Please read all of the safety and operating instructions carefully before using this product Please pay particular attention to all sections of this User Guide that carry warning symbols and notices WARNING This is a Warning symbol This symbol is used throughout the user guide whenever there is a risk of personal injury Ensure that these warnings are read and understood at all times CAUTION This is a Caution symbol This symbol is used throughout the User Guide whenever there is a risk damaging your Lincat product Ensure that these warnings are read and understood at all times IS312 ECN3016 Page 1 SAFETY INSTRUCTIONS WARNING Basic safety precautions including the following should be followed to reduce the risk of personal injury Make sure you have read all of these instructions before switching on the unit Keep this User Guide in a safe place for future reference for you2. and your staff GENERAL Do not clean the unit with a water jet Do not try to modify this product Remove all plastic coatings and clean the unit before use Ensure that the electrical supply cable is not damaged If the supply cable is damaged it should be replaced by Lincat Ltd or other suitably qualified persons in order to avoid a hazard Do not try to move this unit when the tank contains oil Disconnect the unit from the electric supply before servicing This unit must be earthed TECHNICAL SPECIFICATION Cooking Quantities per Basar ma peo os er ar oas PACK CONTENTS Electric fryer with cable and 13 Amp plug Rubber feet x 4 Batter Plate User Guide Dust Cover Lid Guarantee Card Specific Accessories UnitCode Basket BA156 x 1 Basket BA155 x 1 LDF2 Basket BA155 x 2 Basket BA156 x 2 IS312 ECN3016 Page 2 INSTALLATION Push rubber feet into base holes provided and ensure the unit is installed on a sound level work surface which is heat resistant e g stainless steel or formica Inform your personnel that external surfaces and base will become hot For safety regulations the plug must always be accessible CONNECTING TO THE ELECTRICITY SUPPLY Ensure that the voltage of your electricity supply corresponds to the serial plate details The product is supplied with a 13 Amp plug To replace the plug follow these instructions e _ green and yellow wire to E or Earth e blue wire
3. e slots in the basket support Fig 1 to allow the oil to drain Safety High Limit Thermostat Lincat electric fryers are fitted with two thermostats One controls the temperature of the oil the other prevents the oil temperature from reaching a dangerous level if there is a fault with the unit or power supply Ensure that these thermostats are not damaged during use and cleaning If the green neon lights up but the element does not heat up the safety thermostat may need to be reset To re set the safety thermostat e _ The re set button is located below the control head See Fig 2 inside the access hole Push button upwards to re set If the thermostat needs re setting repeatedly this indicates a fault with the fryer and it should be checked by a competent engineer Fig 2 1 Channel 2 Support Bar 3 Access Hole Re set Button IS312 ECN3016 Page 4 CLEANING AND MAINTENANCE CLEANING Disconnect the unit from the electricity supply and ensure it is cool to touch before starting any maintenance or cleaning Use a mild detergent in hot water and a soft cloth Do not use abrasive creams or Scourers Remove basket and batter plate and slide control head up and lift off Remove tank and pour away oil Wipe the control head clean with a damp cloth do not allow water to penetrate control head After cleaning ensure tank is thoroughly dry MAINTENANCE Regular cleaning of the unit is recommended No regular ma
4. intenance is required SERVICE INFORMATION For help with the installation maintenance and use of your Lincat equipment please contact our service department 201522 875520 All service work other than routine cleaning should be carried out by one of our authorised service agents We cannot accept responsibility for work carried out by other persons To ensure your service enquiry is handled as efficiently as possible you need to have the following details available e Brief details of problem e Product code type number and serial number of unit both on serial plate Lincat reserve the right to carry out any work under warranty during normal working hours ie Monday to Friday 08 30 a m 17 30 p m GUARANTEE This unit carries a comprehensive UK twelve month warranty The guarantee is in addition to and does not diminish your statutory or legal rights The guarantee does not cover e Accidental damage misuse or use not in accordance with the instructions in this User Guide or consumable items Damage due to incorrect installation modification or unauthorised service work e The manufacturer disclaims any liability for incidental or consequential damages IS312 ECN3016 Page 5 THIS PAGE LEFT INTENTIONALLY BLANK IS312 ECN3016 Page 6 THIS PAGE LEFT INTENTIONALLY BLANK IS312 ECN3016 Page 7 THIS PAGE LEFT INTENTIONALLY BLANK IS312 ECN3016 Page 8
5. to N Neutral e brown wire to L Live OPERATING INSTRUCTIONS Fig 1 Model LDF 1 Batter Plate 5 Control Head 2 Oil Markers Max Min 6 Control Knob 3 Green Neon 7 Basket Support 4 Amber Neon Fig 1 also represents the other fryer models in the Lynx 400 range Before first use e _ Disconnect the unit from the power supply Remove the batter plate lift the control head out of the rear channel Fig 2 and clean the tank with a little hot water and mild detergent Note The control head is fitted with a safety switch to cut off the power supply when it is lifted up Replace tank ensuring it is thoroughly dry To replace the control head lower it carefully into the rear channel Replace the batter plate Fill the tank with oil to a level between the markers Fig 1 on the batter plate See Technical Specifications for recommended oil quantities and only use clean cooking oil IS312 ECN3016 Page 3 Operating the unit e Connect the unit to the power supply The green neon will light up Turn the control knob to set the desired temperature The amber neon will also light up When the oil has heated up to the set temperature the amber neon will extinguish Fill the basket with food and lower carefully into the oil Hot oil expands Do not exceed the recommended quantities in the Technical Specifications for es et and performance reasons ensure food is dry After cooking Place the basket with the fried food into th
Download Pdf Manuals
Related Search