Aquarius iNtuition Mobile (AQMobile)
Contents
1. When the application starts the AQMobile splash screen is displayed immediately followed by a message box describing the agreement AQMobile IN MBL EN 2 2A 2 Aquarius iNtuition Mobile AQMobile Agreement Not intended for diagnostic use when used via a mobile device Cancel Ok Vou must touch OK to proceed Once vou have touched OK the application can continue Note If there is no activitv on AQMobile for ten minutes vou are automaticallv logged out and vou will need to log in again to continue using it The Server List The server list shows the list of servers available to connect to Server list information is stored in local memorv Each server entrv contains the server name and its hostname or IP address When you select one of the server entries AQMobile displays the list of patient data available on that server Carrier 3 03 PM 1 Note The top bar of the screens shown in this manual might vary in appearance from your device depending on the product and version jw of your device The functionality is the same PEFENS The Demo Server The Demo server is a special TeraRecon server that is available to anyone who has installed AQMobile 2 0 and above You do not need to have your own AqNET server or any of your own study data to use the Demo server It is there so that you can test AQMobile and learn its features The Demo server provides sample data for this purpose Figure 1 The Ser2. e Normal series or sub series image If the data is from a normal series or sub series the image is rendered in 3D VR using the default color template e Scene or workflow activity scene If the data is a scene or one of the workflow activity scenes the scene is displayed in the rendering mode that was used to create it e Secondary capture image If the data is from secondary capture images the image is displayed in the rendering mode used to create the secondary capture 11 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile Rendering Modes The image rendering mode is selected using the control buttons in the bottom right corner of the screen When a normal volume is loaded the control buttons allow you to choose 3D Volume Rendering 3D or Axial Coronal or Sagittal MPR ALIA EL m m CX When a CPR scene is loaded the control buttons allow you 049 to choose 3D volume rendering 3D CPR Red cross Back section view on the red line and Blue cross section view on the blue line See Figure 4 on page 1 12 A Les Distan Figure 4 CPR View Image Slice By Slice Carrier 11 07 AM AQMobile allows you to slice through a series of 2D images GantryTilt one by one 2008 04 26 Mag 1 00 To access slice by slice mode do the following 1 Disable the AQMobile setting Enable loading volume in low resolution on the Settings page See AQMobile Settings
3. on page 1 19 for more instructions 2 Load a 2D series 3 Tap the rotate slice icon circled in red in the image at right to enable rotate slice mode Im 85 Loc 163 00 mm Buttons for slicing forward and backward are displayed in the image window circled in green IN MBL EN 2 2A 12 Aquarius iNtuition Mobile AQMobile 2D Measurements Note The server must be configured for 2D Measurements Please contact Customer Support for more information This tool allows you to obtain distance measurements on a 2D image To enter measurement mode tap the ruler button at the bottom of the Viewer screen circled in Figure 5 on page 1 13 To obtain the most accurate measurements we recommend that you first magnify the image When TeraRecon software distance measurements were tested against a digital phantom the measurement error was shown to be under 1 The measurement was tested using the iPad iPad Mini enlarging the image to greater than 200 pixels Please note that this error estimation does not take into account image modality error Add New Line 5 25 PM Carrier 1 Make sure 2D measurement mode is enabled The ruler Cardiac S64 icon should be darker than the other icons at the bottom of poesia the screen see image at right Mag 1 00 2 Touch the image at the start point of the measurement a Soe You can pinpoint the start point with greater precision by moving your finger before lifting
4. 1168 the workflow activity cy ve To display the image in a workflow scene activity select kol 1189 l the item from the list The image is opened in the viewer RCA VR 4 1170 To close the workflow scene activity list touch the RCA CPR Series button in the top left corner The application E 5 1171 closes the workflow scene activity list and displays the iz r 4 J previous list EAD CPR IM 6 1172 LCX CPR 1173 RCA VTrack 1174 The Viewer When you select a single image from a list the Viewer is launched The data is loaded and the image is rendered and displayed in the Viewer with patient annotation IN MBL EN 2 2A 8 Aquarius iNtuition Mobile AQMobile Pad FM m Note A warning message reading A Mal 4 7 M WARNING Not intended for diagnostic Cardiac 864 use is displayed at the bottom of the ki viewer screen on a strip of yellow 2006 05 09 background color see image at right 08 14 46 B20f CT Viewer Settings Thickness 0 60 mm The setting icon is located in the top right corner of the ae JU viewer screen 120 00 kV 60 The settings allow you to configure viewer settings from within view screen Tap the setting icon to display a menu of setting options See the following image VR Mag 1 00 BI Image viewer settings User manual About Image viewer settings User manual The menu contains the following im
5. AqNet Server Instead the first subseries or workflow scene is loaded If you need to load more than one subseries or workflow scene you will need to leave the Viewer and go back to the Series list Importing Non DICOM Images You can upload non DICOM images to AQMobile Note The server must be configured for non DICOM file uploading Please contact Customer Support for more information Note This feature is available only when AQMobile is connected to an AqNET Server version 4 4 11 82 or later Carrier Studies gt 1 6 818 PROC 7 503 1 image s AL 1 0 B20f 2 504 5 ARTERL 1 0 B20 3 997 10 sa Scene EV 4 500 3 piii 5 Scene EV 5 503 2 g S 6 500 3 gen 9 Scene_E EES 1 Tap the Upload button A screen that shows all saved Saved Photos Cancel 15 photos in the device is opened see image at left 2 Tap the desired photo to select it The selected photo is loaded into the screen as shown in the image below Cancel Move and Scale IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile Note To go back to the previous screen without selecting a photo tap the Cancel button 3 To confirm the selection tap the Choose button Once you have confirmed the photo selection by tapping the Choose button a screen is opened that allows you to enter the patient name patient ID study description and series descr
6. The two fingers are pulled together or pushed apart Operations The AQMobile Viewer supports the following operations on images Rotate W L Zoom and Pan Some gestures are used in conjunction with the four control buttons in the bottom left half of the screen IN MBL EN 2 2A 10 Aquarius iNtuition Mobile AQMobile RCE SE _ Rotate Single touch When the button is selected the image is rotated in the direction of finger movement Single touch When the button is selected finger movement upward causes the W L to increase finger movement down causes it to decrease Dual horizontal touch Movement upward causes the W L to increase movement down causes it to decrease Single touch When the button is selected finger movement upward causes the image to zoom in finger movement down causes zoom out Pinch Opening the fingers wider zooms the image out Closing them together zooms the image in Pan Single touch When the ES button is selected the image is panned in the direction of the finger movement Single touch and move This gesture pans the image regardless of the from the screen edge operation selected with the control buttons However when the Viewer is not in pan mode it is important to touch the very edge of the screen before panning Otherwise finger gestures are interpreted according to the selected mode Dual vertical touch Pans the image in the direction of the movement Image Rendering
7. it 3 When you have located the correct start point lift your finger off the screen 4 Touch the image at the end point of the measurement The length of the line is calculated and displayed If you need to move your finger to find the precise end point the length is continuously updated Im 210 Loc 115 70 mm Figure 5 Measurement Icon 5 Lift your finger to complete the measurement Modify an existing line To modify an existing measurement touch the line The line enters edit mode indicated by small red circles at the endpoints You can adjust the distance and position of the line by touching the start or end point and moving your finger Tap the line a second time to exit edit mode Delete an existing line 1 Tap the line that you want to delete It changes to edit mode 2 Touch either one of the endpoints 3 Without lifting your finger move toward the other endpoint 4 When your finger is as close as possible to the second endpoint lift your finger The line is deleted when the distance is very small 13 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile Note While in 2D measurement mode you can single touch the screen and pan the image from the edge of the screen These operations will not cause AQMobile to exit 2D measurement mode Switching Between 2D and 3D Viewers By default when a study is loaded the 3D volume rendering viewer is used To use the 2D image viewer tap the 2D button located
8. series study date None 14 CORONARY Page size US 567 1 series 15 Aq64_CarotidStent CT 0350563119 5 series study list type User study 16 Elbow w hardware CT 245261301136 4 series Upload These settings determine which studies are displayed in the Study List IN MBL EN 2 2A 6 Aquarius iNtuition Mobile AQMobile e Page size Default is 17 e Modality For example CT MG MR and so on Default is None e Study date For example Today Yesterday Last2Days Default is None e Study list types User study or Published study Default is User study e User studies are those that have been assigned to you When you connect and log in to the AquariusNET server you have access to all studies that have been assigned to you e Published studies are those that are accessible to anyone When a study is published it becomes publicly accessible If you choose to view the list of published studies you will see all studies that have been published by anyone The Study List allows you to toggle between the two types Please see the following section for details Other Functions on the Study List Screen e Refresh To redisplay the Study list touch the Refresh button ka in the top right corner e Close Study list To close the Study list touch the Options button in the top left corner The Study list is closed and the Options list is displayed The Series list ae Studies When you select an en
9. settings screen The window and level step sizes can be configured independently Options Image quality Enable image JPEG Lossy compression Enable loading volume in low resolution Exiting the Viewer Window step To close the viewer and display the previous list touch the Level step Back button in the top left corner of the screen Note AQMobile supports both the portrait and landscape orientations of your device When you rotate the device the application detects the new orientation and displays the GUI and images accordingly 21 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile IN MBL EN 2 2A 22
10. 00 1 200 19 17 None None User study Native2D IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile e Timeout e Server connection timeout Default is 10 seconds e Server service call timeout Default is 35 seconds e Study list filter These settings determine which studies are displayed in the User Study Published Study Page size Default is 17 Modality For example CT MG MR and so on Default is None Study date For example Today Yesterday Last2Days Default is None Study list types User study or Published study Default is User study e Image viewer e Image quality Default is 75 e Enable image JPEG Lossy compression On Off Default value is On e Enable loading volume in low resolution On Off Default value is On Note You do not need to exit AQMobile to access these settings e Window Level Templates AQMobile has four default window level templates The numbers in parentheses window level are the default values Adb 350 75 Head 100 45 Lung 1500 700 Bone 2200 200 These templates are used as preset window level values which is discussed in the Window Level Preset Context Menu section below Window Level Preset Context Menu When you tap the W L icon in the Viewer a context menu is displayed on the screen showing each of the four templates plus a Reset button see image below Tap the button for the desired window level to apply the preset val
11. 3 tuition tuit M iNtuition Mobile User Manual inua Rot WL Zoom Pan 7 TERARECON 5 TERARECON INC leraRecon Inc 4000 E 3rd Avenue Suite 200 Foster City CA 94404 USA 2015 EC EMERGO EUROPE iy Molenstraat 15 2513 BH The Hague The Netherlands ME20 Australian EMERGO AUSTRALIA Sponsor 201 Sussex Street Darling Park Tower II Level 20 sydney NSW 2000 Australia 0197 Symbols used in the label IN MBL EN 2 2A The CE 0197 mark applies to iNtuition and AquariusAPS Software The CE mark is affixed on the software and computer containing the aforemen tioned software Manufacturer The name and address of the manufacturer are listed next to this symbol Date of Manufacture The year of manufacture is listed next to this symbol Authorized Representative in the European Community The name and address of TeraRecon s authorized representative in the European Community are listed next to this symbol GOST R Mark Mark of conformity certifying that Russian Federation safety requirements have been met Notice TeraRecon Inc reserves all rights in this document which is copyrighted Copyright 2011 2015 by TeraRecon Inc TeraRecon Reproduction of this document in any form is strictly prohibited unless specific written consent from TeraRecon has been obtained Contents are subject to change without notice This document may only be used if the reader releases TeraRecon from
12. Then the application opens the series list sub series list workflow scene activity list or the viewer The Patient List ad l Options Cadie If the server you are connected to is running AquariusNET version 4 4 6 Patch1 or later the Study List is presented as a Patient List as shown in the image at right 3 US 1 Terarecon Tardu 4 TomTec Strass zstages A single entry in the Study List contains the following i 5 DE hardware The patient name The modality of the study The Patient ID Myocardial CT SPECT 3 The number of series included ee 7 Ph iCT Gated C A P Figure 3 Study List To avoid confusion the list of studies whether in the form of a Patient List or a URL Link List will be referred to from here on as the Study List Study List Filtering jo in T In the top bar on the right side there is an icon that poc ANE l looks like a funnel This is the study filtering icon see ja image at right Tap this icon to open the filter menu t Study date None TDA 4 series 5 Aq64 soft plaque CCSA CT A456313111 3 series G ance 6 Ph iCT mpCardiac1 CT 1450731146 20 series 7 Fenestrated Cook 1 CT 05504732150223 1 series 8 AAA1 CT 53083 11 series 9 MR Brain Tumor 1 MR 1 7 series 10 ACA Aneurysm CT 04532039160 5 series 11 S DS Cardiac2 i CT 5359703511 20 series Mod al ity None 12 Foot CT CT_1 5 series 13 Lumbar CT MDCT_3 2
13. age viewer settings e Image viewer settings See AQMobile Options on page 1 16 for a complete description of these and other AQMobile settings 9 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile e User manual Open the user manual this manual on your device This menu item opens a screen that contains a link to the manual in PDF format see image at right e About Display the product name and version number e Cancel iPod and iPhone On the iPad and iPad Mini the settings menu disappears automatically when you tap on one of the options or on any area outside of the dialog If you are viewing AQMobile on an iPod or iPhone you can also tap the Cancel menu item Manipulating the Image The AQMobile Viewer supports some finger gestures for performing operations on the image that change its orientation scale position and window level Gestures Single touch gestures use one finger to touch and move around the center or the lower right corner of the image Dual touch gestures use two fingers on the screen simultaneously in three different configurations e Horizontal The two fingers are placed side by side horizontally and the distance between them does not change during movement e Vertical The two fingers are placed one above the other and the distance between them does not change during movement It is recommended that you use your index finger and thumb for this gesture e Pinch
14. all claims relating to or arising from any errors it may contain Use by the reader herewith constitutes such an understanding This provision may only be modified on an individual basis in a separate written agreement executed between TeraRecon and the owner or licensee of a specific instance of the product to which this documentation relates Apart from any warranty that may be stated in a specific written agreement between a party and TeraRecon TeraRecon makes no warranty of any kind whether expressed or implied relating to the contents of this document or any software provided by TeraRecon including but not limited to iNtuition Aquarius Workstation Aquarius Workstation iNtuition Edition AquariusGATE AquariusNET AquariusBLUE AquariusAPS and AquariusNET Client software TeraRecon will not be liable in any event for incidental or consequential damages in connection with or arising out of the provision performance or use of this documentation or any software product to which it may relate or any software or hardware product supplied by TeraRecon for use with any such software product or this documentation itself Microsoft Windows Windows NT Windows 2000 Windows XP Windows 7 Windows Server 2003 and Windows Server 2008 are registered trademarks of Microsoft Corporation This document contains important helpful use and precautionary information Please review carefully all precautionary statements and advisories whether onscreen
15. e histogram ratios thereof and tracking of quantities over time A database is provided to track and compare results using published comparison techniques such as RECIST and WHO Calcium scoring for quantification of atherosclerotic plaque is supported Support is provided for digital image processing to derive metadata or new images from input image sets for internal use or for forwarding to other devices using the DICOM protocol Image processing tools are provided to extract metadata to derive parametric images from combinations of multiple input images such as temporal phases or images co located in space but acquired with different imaging parameters such as different MR pulse sequences or different CT image parameters e g dual energy iNtuition is designed for use by healthcare professionals and is intended to assist the physician in diagnosis who is responsible for making all final patient management decisions Interpretation of mammographic images or digitized film screen images is supported only when the software is used without compression and with an FDA approved monitor that offers at least 5Mpixel resolution and meets other technical specifications reviewed and accepted by the FDA iNtuitionMOBILE provides wireless and portable access to medical images This device is not intended to replace full workstations and should be used only when there is no access to a workstation Not intended for diagnostic use when used via a
16. entry The Study List The Study List displays the patient data available for viewing Each entry in the list represents a single study 2 GE64 Stent The URL Link List Last s If the server you are connected to is running AquariusNET server version 4 4 6 or earlier the Study List is presented as a list of URL links Each link represents one or more series Figure 2 URL Link List A single entry in the URL link list contains the following e The name of the data set e The number of series included e A field indicating whether an authentication login is required to access the data Y or N The application displays the first 17 entries of data on the server followed by the Load Next button If you can not see all 17 entries on your device scroll down to view the rest of the 5 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile list To retrieve more data touch Load Next The application loads the next 17 entries and displays them below the current list If you select a URL link entry that does not require a login the application retrieves the link detail information from the server and opens one of the following the series list the sub series list the Workflow scene activity list or the viewer depending on how many items are in each of the subordinate lists When you select a URL link entry that requires authentication login a pop up dialog is displayed with a keyboard to allow you to type in the password
17. erver To cancel without saving tap CANCEL Modify Profile 1 Tap the MODIFY button 2 Adjust the color of the circles in the desired squares using the plus and minus buttons 3 Tap SAVE to update the profile on the server Delete Select Profile 1 Tap the SELECT button 2 Tap the desired profile from the list This selects the profile The Contrast tool screen for the selected profile is displayed automatically 3 Touch and move finger from left to right on specific profile row The DELETE button is displayed 4 Tap the DELETE button The profile is deleted Testing a Profile Carrier 2 56 PM The purpose of testing is to determine how good the lighting is in your current environment when compared to a profile Profile m1 previously created in an environment that is optimal for viewing images To begin testing select a profile from the profile list and then tap the TEST button as shown in the following figure During the test four sets of squares are displayed one at a time For each set tap the square that contains a visible circle Note This test is timed For an accurate evaluation you must tap the visible circle within 5 seconds after the squares are displayed The circle might be barely visible so it is also important to look carefully MODIFY ADD NEW SELECT The lightest spot is tested first The circle is placed in one of the four squares at random IN MBL EN 2 2A 18 A
18. following is required in order to use Aquarius iNtuition Mobile v2 2 and above e A mobile device running iOS 7 1 or above e user account authorizing you to access a TeraRecon AquariusNET server version 4 4 5 or above e One of the following e Local access through a wifi connection to the AquariusNET server e From an external location a VPN connection to the AquariusNET server Downloading and Installing You can download the AQMobile application from the Apple Store using iTunes 1 Enter terarecon or aqmobile in the search bar a EJ x Q aqmobile 1 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile The search results are displayed as follows Showing results for aqmobile iPhone Apps 2 Click the appropriate link for your device The description page for the application is shown App Store gt Medical gt TeraRecon Inc Aquarius Mobile TeraRecon Inc gt Details Ratings and Reviews Related E Free This app is designed for both Phone and iPad o wwe 11 Rated 4 TeraRecon Inc 2011 3 From the description page click the Free button to begin the download Note if you do not have an Apple Store account you will need to set up an account before downloading Startup To start the AQMobile app first make sure you are connected to the Internet Then touch the AQMobile icon see image at right to start the application Y Y
19. in the top toolbar on the right This button toggles between the 2D and 3D viewers The study is opened in the 2D viewer as shown below Carrier 11 15 AM Carrier gt 11 14 AM mm Back m VR Mag 1 00 AAA 53083 St Se 6 2005 04 26 asion 16 2005 04 26 11 55 1 1 00 iewer lt Figure 6 Left 3D Rendering Viewer Right 2D Note that the viewer toggle button now reads 3D circled in green in the image above right Tap the button to go back to the 3D rendering viewer Loading Another Series From the Viewer In the top bar on the right side there is an icon consisting of three horizontal lines see image at below This is the load series icon Tap the icon to show a menu containing all the series in the currently loaded study This menu allows you to load another series without leaving the Viewer Tap the desired series to load it iPad gt 3 51 PM 80 mm 8 Aquarius Mobile 2005 04 26 11 55 1 Mag 1 00 2 503 1 image s Aorta VR 3 506 1 image s AortaRoot 4 202 6 image s econdaryCapture 5 517 1 image s Aorta VR W IN MBL EN 2 2A 14 Aquarius iNtuition Mobile AQMobile If the series selected has subseries or workflow scenes those lists are displayed instead of an image in the viewer so that you can select a subseries or workflow scene from that list Note Displaying subseries or workflow scene lists from the viewer is not supported in earlier versions of the
20. iption If you had already selected a study before importing the non DICOM image the first three items in the screen shown at right are filled in automatically On this screen you can tap the Cancel button to go back to the Patient List screen or tap the Upload button to send the photo to the server The photo will then be converted to a DICOM file and sent to AqNet DICOM server Eventually it will be displayed in the Patient List as a DICOM file Note Before uploading the photo to the web server you must enter the patient name and patient ID in the text input boxes AQMobile Options Carrier 6 00 PM Patient Name example Name Patient ID example ID Study Description Series Description Cancel Upload Tap the Options button from the Study List see Figure 3 on page 1 6 to open the AQMobile Options screen as shown below There are three options available Patient list Contrast tool and Settings 2 53 PM Options iPad gt Server Patient list Contrast tool Settings Patient List Return to the Study List IN MBL EN 2 2A 16 2 53 PM S Options Aquarius iNtuition Mobile AQMobile The Contrast Tool The Contrast Tool allows you to create and save profiles of the lighting conditions in various environments For example if you are in a good environment for image viewing you can create and save a contrast profile of that environment This profile can later be c
21. ompared to other environments where the lighting might be different A contrast profile contains four color squares Each square contains a circle that can be adjusted to four levels of color Using the Contrast Tool you can add modify delete or test the contrast profile Add New Profile In the Contrast Tool screen tap the ADD NEW button circled in the previous image to open the screen shown at right Adding New Profile Options Contrast Tool Adjust the color of each circle as follows 1 Tapa square to select it 2 To darken the circle tap the minus button 3 Continue to tap the minus button making the circle darker until it is so similar to the color of the square that it is barelv visible If the circle becomes completelv invisible tap the plus button to make it slightly lighter Note You can also make the circle lighter or darker by touching the circle and moving in an upward or downward direction on the screen respectively When all four circles have been modified so that they are all just barely visible save the contrast profile if desired Save Profile To save a profile do the following 1 Tap the SAVE button dialog opens where you can provide the profile name and description 17 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile 2 Enter a unique profile name and optionally a description 3 Tap OK to save The profile is stored on the AqNET s
22. or contained herein as these are essential to the effective and authorized use of the products and applications discussed Note Any beta features extended are not to be used clinically and can ONLY be authorized obtained or accessed through an appropriate beta agreement TeraRecon iNtuition Aquarius and AquariusNet are either registered trademarks or trademarks of TeraRecon Inc in the United States and or other countries Copyright 2011 2015 TeraRecon Inc All rights reserved i IN MBL EN 2 2A Indications For Use To receive store transmit post process display and allow manipulation of reports and medical images from acquisition devices including optical or other non DICOM format images DICOM images with modality type XA US CR DR SPECT NM and MG and images from volumetric medical scanning devices such as EBT CT PET or MRI To provide access to images derived data and derived images via client server software web browser and mobile technology Visualization in 2D 3D and 4D are supported for single or multiple datasets or combinations thereof Tools are provided to define and edit paths through structures such as centerlines which may be used to analyze cross sections of structures or to provide flythrough visualizations rendered along such a centerline Segmentation of regions of interest and quantitative analysis tools are provided for images of vasculature pathology and morphology including distance angle volum
23. quarius iNtuition Mobile AQMobile In the image at right the upper left square contains the circle which although difficult to see is visible If you can not see a circle at all this indicates to the software that the lighting in your current environment is less than optimal when compared with this profile After you have made a selection or after 5 seconds have passed the contrast tool displays the next darkest set of squares The circle is shown in one of the other squares randomly selected at the gray level stored in the saved profile This process continues until all four levels of brightness have been tested Test Results When you have finished selecting the circle in each set of squares the test results are reported The score represents the percentage of times out of 4 that you correctly identified the square containing the circle AQMobile Settings SELECT CANCEL There are four groups of settings Timeout Study list filter Image viewer and Window Level Templates iPad gt 2 53 PM Options Settings Timeout in secans Server connection Server service call Study list filter Page size Modality Study date Study list type Image viewer Compression quality Enable image JPEG Lossy compression Enable loading volume in low resolution Initial view type Window step Level step Window level tariplatas Abd w 350 1 75 Head w 100 l 45 Lung w 1500 12 700 Bone w 22
24. tion is saved to local memory and is added to the server list Editing a Server s Configuration eee S server To edit an existing server configuration do the following Diagnostics 1 Display the Server List shown at right Demo 2 Touch the Edit button located in the upper left corner The server list is displayed in Edit mode as shown below eeoa ATAT F 3 41 PM gt 93 NEN Done server Diagnostics Demo IN MBL EN 2 2A 4 Aquarius iNtuition Mobile AQMobile 3 Tap the server to be edited 4 The selected server configuration screen is opened see eeeec F 3 36 94 image at right con 5 Change any of the text entry boxes in the screen For Logical Name Diagnostics details see Adding a Server to the List on page 1 4 Server n Step 2 Port 443 6 When finished touch Save in the upper right corner aqmobile The server list in Edit mode is displaved again Password 00000000000 7 Touch Done to exit Edit mode QIWIEIRITIYIUIIIOIP Changes are reflected in the server list AISIDIFIGIHIJIKIL ZIXICIVIBINIM Deleting a Server From AQMobile E To delete a server from the list do either of the following 1 Swipe the server entry from right to left The Delete button is displayed 2 Touch Delete to delete the entry Or 1 Touch the Edit button in the top left corner 2 Touch the button on the server entry to delete the
25. try from the Study list that has multiple series the series list is displayed showing the series included in the study Each series entry shows a thumbnail icon the series number the number of images and series description 1 104 266 image s 2 103 1 image s 3 202 3 image s 4 cap II 4 203 image s cap To close the series list touch the top left button The aM X pud Study list is displayed scene CTA Abd To open a series touch the desired entry in the list If there is a sub series list that list is displayed Otherwise the workflow activity list is displayed 6 502 2 image s Scene CTA Abd 500 2 image s ocene EVAR 8 500 1 image s 7 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile The Sub series List When a series is selected that has multiple sub series this list is displayed Each sub series entry shows a thumbnail icon and sub series number When an item in the sub series list is selected the viewer is opened displaying the image To close the sub series list touch the Series button in the top left corner The previously displayed list is redisplayed Workflow Scene or Subseries List 6 33 PM E H No flow When you select a series that is a workflow scene and if the series has multiple workflow scene activity the pag l 1167 workflow scene activity list is displayed Each workflow LAD VR scene activity shows a thumbnail icon and the name of TTT 2
26. udy list Eileen Other Functions on the Study List Screen The Series list m ee Sr Ss Se The Sub series Listi tet set ERA e eas Workflow Scene or Subseries List Th VibWer VIEWEr SCUINGS au Manipulating the Tia OS ood ER nn cie Inace Tee nde Pile imase ShcesByssllCe del EUN OI 2D MCASUPEIMECING e Switching Between 2D and 3D Viewers Loading Another Series From the Viewer Importing Non DICOM Images AQMobile Options Re un ie The Contrast Tobin nt RD et ieda uta S GUNN eds cc men Window Level Preset Context Menu eene Exiting the Viewer iii IN MBL EN 2 2A IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile Aquarius iNtuition Mobile AQMobile Introduction This product is for medical professionals to view clinical data on mobile devices including the iPod iPhone iPad and iPad Mini WARNING Aquarius iNtuition Mobile is not for diagnostic review CAUTION U S Federal law restricts use of this device to trained physicians or other suitably qualified and trained personnel on the order of a physician Requirements The
27. ues To apply the initial recommended window level for the image tap the Reset button Head Lung Bone Reset Im Loc 0 00 mm Ax Cor Saq IN MBL EN 2 2A 20 Aquarius iNtuition Mobile AQMobile Editing Window Level Templates es 11 43 AM You can change the name window and level default values by tapping one of the templates see image at right This opens the Window Level Template screen shown below Window Level Template _ Headi Enter a new Name Window value or Level value to change it To save changes tap Save in the upper right Window 100 corner To cancel tap the Cancel button in the upper left Tm Us aan corner alw EJRITIvjulijo P AJSIDIFIGIHIJIKJL zixjojvjejnim i 2123 return Carrier gt 2 23 PM Each time you tap one of these buttons the window level Mean changes by a configurable step value The default step is 10 W L Step bv Step This allows vou to increment or decrement the window or level values bv steps Four buttons are displaved on the screen for these functions W and W for increasing and decreasing respectively the window values and L L for the level values See image below You can also touch the button and hold it down The value of the window or level is changed continually step by step until the button is released To change the size of the step for either window or level open the AQMobile
28. ver List 3 IN MBL EN 2 2A Aquarius iNtuition Mobile AQMobile Adding a Server to the List 3 10 PM If the server you need to connect to is not in this list i you can add it by doing the following Logical Name 1 From the Server List screen touch the button which is located in the upper right corner see Figure 1 above A server entry form with keyboard is displayed see Username figure at right cua dt 2 Enter the following into the form QWIEJRITIVJU I O P e The Logical Name Choose a name that will identify this server in a meaningful way to you A s D 3 H K This entry is optional If you do not enter a logical name only the server s hostname or IP er address will appear in the server list e z x m B N M a e The servers hostname or IP address 7123 space return e The Port If you do not know the port number ask the server s system administrator e Username and Password These will be your credentials for connecting to the server e Optional The Group Name If you can not see the text entry box for Group Name scroll down The keyboard hides a portion of the screen 3 When done touch the Save button in the upper right corner You can also touch the Return button in the lower right corner to save the server configuration The application attempts to connect to that server to confirm that the server is alive If the connection is successful the server informa
29. web browser or mobile device Precautions Related to Display The Auto brightness feature changes the screen brightness automatically It might not adjust properly under some circumstances in which case the feature should be disabled If you do not know how to disable Auto brightness consult the user manual for your device or contact Apple Customer Support for instructions Outdoor lighting conditions can reduce the contrast of images being viewed and may hinder your ability to distinguish subtle changes in the image See The Contrast Tool on page 17 for instructions on how to use the Contrast Tool to configure the device for different lighting environments A cracked or scratched screen protective sheet or smudges on the device s screen surface may affect the viewing capability Patent Information The product described in this document is protected by the following patents http www terarecon com wordpress patents IN MBL EN 2 2A ii Contents Introduction Requirements Downloading and Installing Startup The Server List 6S SSS eo ee mmm Additis a Server toth SE ovre doce Dae RETE EG Ioa SEVERE Editing a Server s Configuration menecer a a Deleting a Server From AQMobile The Study List The URL Link List iet Tine Parent iat I da St
Download Pdf Manuals
Related Search