Fellowes Helios 30TM User's Manual
Contents
1. O Q v 2 D INDEX LAMINATOR CONTROLS QUICK START GUIDE ENGLISH FRANCAIS ESPANOL 4 7 8 11 12 15 BINDING MACHINE CONTROLS QUICK START GUIDE ENGLISH gt CAPABILITIES Performance Technical Data Entry width 12 Voltage Frequency Binding capacity max 1 2 300 sheets 201b Current Amps 110 120V AC 60Hz 5 5A Estimated heat up time 4 minutes Wattage 600W Cool down tind 30 60 minutes Dimensions HxWxD 20 9 x 9 4 x 3 9 Binding cycles 1 10 cycles 1 2 minutes Net weight indirnti Binding capacity Ready indication Light amp beeps The maximum sheet capacity can be a single up to 300 LED interface Yes sheet max or multiple documents up to approximately Heat Shield Yes M sheets max an Power Save Auto shut off Yes 30 mins 9 h x 60 rhe 300 kinh Multiple Document Binding Yes 10 x 15 sheets 150 max IMPORTANT SAFETY INSTRUCTIONS CAUTIONS Please read before use and keep for future reference When binding plug the machine into an easily accessible socket to prevent electrical shock do not use the appliance close to water do not spill water on to the appliance power cord or wall socket DO ensure the machine is on a stable surface shelves DO test scrap sheets and set the machine before use DO NOT use appliance if the power cord is damaged DO remove staples and other me2. Thank you for purchasing a Fellowes product Please visit www fellowes com register to register your product and benefit from product news feedback and offers Product details can be found listed on the rating plate positioned on the rear side or underside of the machine FCC CLASS B NOTICE NOTIFICATION POUR LES ETATS UNIS Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more ofthe following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help CANADA CLASS B NOTICE AVIS CANADA CLASSE B This Class B
3. digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada MODIFICATIONS Any modifications made to this device that are not approved by Fellowes may void the authority granted to the user by the FCC and or by Industry Canada to operate this equipment Toutes modifications apport es ce dispositif et non approuv es par Fellowes annuleront le droit accord l utilisateur par le FCC et ou par Industrie Canada de faire fonctionner cet quipement Fellowes Australia 61 3 8336 9700 Korea 82 0 2 3462 2844 Benelux 31 0 76 523 2090 Malaysia 60 0 35122 1231 Canada 1 905 475 6320 Polska 48 22 77 1 47 40 Deutschland 49 0 5131 49770 Russia 7 495 228 14 03 Espafia Portugal 34 902 33 55 69 Singapore 65 6221 3811 France 33 0 1 78 64 91 00 United Kingdom 44 0 1302 836836 Italia 39 71 730041 United States 1 630 893 1600 Japan 81 0 3 5496 2401 1789 Norwood Avenue Itasca Illinois 60143 1095 USA e 630 893 1600 fellowes com Australia Deutschland France Japan Polska United Kingdom Benelux Espa a Italia Korea Singapore United States 2008 Fellowes Inc Part No 403838
4. ough clear space around the machine to operate safely Insert the power lead into the power socket located at the rear of the machine HOW TO BIND Switch the power on located at the rear side The Power On button will be red To activate the machine press the Power On button on the control panel The machine will warm up the red LED will flash The machine will beep 3x and the LED turns green when the machine is ready to bind Prepare the documents by loading the sheets into the thermal covers For best results do not to place too many or too few sheets into the cover Use the binding thickness scale as a guide The guide is cali brated in 6mm widths Helios 30 will accept single or multiple documents up to a combined total thickness of 1 25 approximately 300 sheets 201b The selected binding cycle is shown with blue LED Use the timer selection buttons to navigate up or down the scale if required The scale has 10 settings Eg 0 25 document thickness setting 1 up to 60 sheets 1 25 document setting 10 up to 300 sheets NEED HELP ET he 10 Plug the machine into an easily accessible main socket Switch the main supply on Open and lift the lid by releasing the safety catches on the front of the lid Pull open the document clamp Heat Shield fea ture insert the documents into the binding channel Ensure the binding covers spine touches the heating element Start
5. tal articles prior to binding DO NOT attempt to open or otherwise repair the machine DO keep the machine away from heat and water sources DO NOT exceed the machines quoted performance DO turn off the machine after each use DO NOT allow children to use this machine without adult DO unplug the machine when not in use for an extended supervision period DO NOT bind sharp or metal objects eg staples paper DO use binding covers designed for use at the appropriate clips settings DO NOT bind heat sensitive documents eg tickets ultra DO keep away from pets while in use sounds ett DO NOT leave the power cord in contact with hot surfaces a te the heating plate while binding it DO NOT leave power cord hanging from cupboards or STORAGE amp CLEANING Unplug the machine at the wall Allow the machine to cool The outside of the machine can be cleaned with a damp cloth Do not use solvents or flammable materials to polish the machine BINDING MACHINE CONTROLS A On off switch rear side g Lid lock 2 Power On button amp LED I Binding channel C Binding thickness guide Timer selection increase gt Timer selection decrease lt q EN Select OK button O Thickness setting timer selection HH Lid FEATURES amp TIPS SYSTEM CHECK POWER SAVE OK System Check function When switched on the machine performs a System Check function The control panel illuminates LED neons in sequence
6. the binding cycle by pressing the Select OK button The blue LED will start flashing and counting down in sequence When the cycle is complete the machine will beep 3x The blue LED will switch off The machine has an integral cooling tray It can be extended from the back of the machine and can also be pulled upwards to accept larger documents When the binding cycle is complete immediately remove the documents and place in the cooling tray or on a flat surface to allow the document to cool The document can be removed from the machine mid cycle if required take care the glue may be hot and melted Let our experts help you with a solution Customer Service www fellowes com Always call Fellowes before contacting your place of purchase see the rear cover for contact details TROUBLESHOOTING Problem Possible cquse Solution No red power on LED Machine is not switched on Switch on machine at rear next to plug inlet and at the wall socket No green ready light after a long period Machine is in a hot or humid area Move the machine to a cooler and dry area Loose and unglued sheets Binding cover may be too thick to bind Timer setting may be incorrect Process the documents again ensure sheets are in contact with the glued spine by tapping gently on a flat surface Check timer setting is correct and process the document again Loose and glued sheets The co
7. to check their operation Heat Shield function The document clamp operates as a Heat Shield to prevent operators from accidentally touching the heating plate Auto Off function If the machine is not active for 30 minutes the Auto Off function will place the machine into standby mode The Power On LED will flash red and green To operate the machine press the Power On button ICI DICC rc CIC A e Always put the document into the appropriate sized binding cover e For better results consider including blank sheets to fill the thermal cover to capacity e Always test bind with a similar size and thickness of thermal covers before final process e Helios has an angled heater mechanism to ensure correct document alignment with the document support during the binding process e For best results use Fellowes brand supplies e Thermal binding covers work best with thin and uncoated types of paper Care should be taken with thick and coated papers to ensure satisfactory results e Ifthe sheets have not been glued completely to the cover the document can be re processed to improve the result e Ensure the sheets are well aligned and touching the glued spine of the thermal cover by tapping the collated document in the cover onto a flat surface This can be done before and after the binding process 5 6 BEFORE BINDING Ensure the machine is on a stable surface Check there is en
8. ver size is too small for the number of sheets Check the number of sheets is appropri ate for the cover width Select larger spine width if necessary Extended heating cycle Timer setting may be incorrect Documents left on the heater plate Check timer setting is correct Ensure prompt document removal after the cycle is complete WORLDWIDE WARRANTY Fellowes warrants all parts of the binder to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer If any part is found to be defective during warranty period your sole and exclusive remedy will be repair or replacement at Fellowes option and expense of the defective part This warranty does not apply in cases of abuse mishandling or unauthorised repair Any implied warranty including that of merchantability or fitness for particular purpose is hereby limited in duration to the appropriate warranty period set forth above In no event shall Fellowes be liable for any consequential damages attributable to this product This warranty gives you specific legal rights You may have other legal rights that vary from this warranty The duration terms and conditions of this warranty are valid worldwide except where different limitations restrictions or conditions may be required by local law For more details or to obtain services under this warranty please contact Fellowes or your dealer PRODUCT REGISTRATION
Download Pdf Manuals
Related Search