DVR Manual
Contents
1. No Physical interface logo ID Description 1 VIDEO IN Video input connector 4 CH two rows of two of four 8 CH two rows of four of eight 16 CH two rows of 8 of 16 D0 12V 13 ALARM Alarm input and output interface PTZ interface etc see Alarm Interface specific description 10 11 12 Note The rear panel of the USB interface on the one after the mouse the next one after storage devices The mouse such as access to the next USB port the mouse control will lead to an exception 2 5 Audio and video input and output connections 2 5 1 Video input connections The video input port is BNC connector plug The demand of input signal is PAL NTSC BNC 1 0Vp p 750 The video signal must be accorded with the state standard which has the high signal to noise ratio low aberration and low interference The image must be clear and has natural color in the appropriate brightness Insure the vidicon signal stable and credible The vidicon should be installed in the appropriate location where is away from backlighting and low illumination or adopts the better backlighting and low illumination compensation The ground and power supply of the vidicon and the DVR should be shared and stable Insure the transmission line stable and credible 16 The video transmission line should adopt high quality coaxial pair which is chosen by the transmission distance If the transmission distance is too far it should adopt shielded twisted pai2. Delete Cancel DONS Type CN99 Enable Domain Name your 3322 org server Name members 3322 0rg Port 80 User Name Password Cancel DDNS It is the abbreviation of dynamic domain name server DE Menu gt Sysiem gt GUI Display Local domain name Provide the domain name registered by DDNS Channel Title Set Server domain name Provide the domain name of DDNS Time Display ChannelTite M Port Provide the visit port number of DDNS Record Status M Alarm Status Bitrate Info Transparency 255 Resolution 800 600 gt When the DDNS is successfully configured and start you can connect the domain Channel 1 X User name Provide the account registered by DDNS Password Provide the password registered by DDNS name in the IE address column to visit Region Cover k Time Display Channel Tite M Set Note The DNS setup must be configured correctly in the network setup 4 4 5 Output mode Configure the video output parameters including the front output mode and code output mode Front output In the local preview mode include channel name time title channel title recording status alarm status code stream information transparency and cover area Code output In the network surveillance and video file mode include channel name time title channel title recording status alarm status code stream information transparency and cover area channel name Click the channel name modify button and e
3. 4 4 4 Network service i User Name 2 Password IP Address Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters PPPoE setup 48 Input the user name and password that ISP Internet service provider provides After saving it reboot up your system Then the DVR will build a network connection based on PPPoE The IP address will change into dynamic IP address after above operation is well done Operation After PPPoE dialing successfully look up the IP address in the IP address and obtain the current IP address Then use this IP address to visit the DVR through user port NTP setup The NTP server must be installed in the PC Host computer IP Input the IP address installed NTP server Port Default 123 You can set the port according to NTP server Time zone London GMT 0 Berlin GMT 1 Cairo GMT 2 Moscow GMT 3 New Delhi GMT 5 Bangkok GMT 7 Hong Kong Beijing GMT 8 Tokyo GMT 9 Sydney GMT 10 Hawaii GMT 10 Alaska GMT 9 Pacific time GMT 8 American mountain time GMT 7 American mid time GMT 6 American eastern time GMT 5 Atlantic time GMT 4 Brazil GMT 3 Atlantic mid time GMT 2 Update cycle The same with the NTP server check interval Default 10minutes EMAIL setup If the alarm is turned on or the alarm linkage photos are taken send an email about the 49 Main Menu gt System gt Ne Main Menu g
4. Common Set system time data format language hard disk full time operation machine number video format output mode summertime Configuration stay time Code Set main assistant coding parameter code mode resolving ability frame rate code stream control image quality type code Configuration stream value frame between value video audio enable Network Set basic network parameters DHCP and DNS parameters network high speed download Configuration System PPPOE NTP Email IP purview DDNS parameter Configuration Output mode Set channel name preview hint icon state transparency cover area time title channel time fold PTZ Set channel PTZ protocol address baud rate date bit stop bit check configuration Serial port Set serial port function baud rate date bit stop bit check configuration Patrol Set patrol mode and interval time configuration Management Hard disk Set appointed hard disk as read write disc read only disc or redundant disc clear data resume date and so on tools management User Modify user team or password Add user or team Delete user or team management Break the connection with the already login user Lock the account after break until booting up again 38 TV adjust Adjust TV upside downside nearside starboard distance Automatic Set automatic reboot system and automatic deleting files maintenance Resume setup state common setup code setup recording
5. disk number input port type status and overall capability The operation includes setup the write read disk read only disk redundant disk hard disk format resume default Choose the hard Cancel disk and click the right function button to execute Note write read disk The equipment can write or read data User Name Group Status Modify User admin admin GUI O quest user Normal read only disk The equipment can read data but cannot write data Modify Group redundant disk Double backup the video files in the write read disk BEGET user Default User odity Passwo Add User Add Group 4 5 2 User management Delete User Delete Group Manage the user purview Note 1 The char length is 8 bytes at most for the following user and user team name The blank ahead or behind the char string is invalid The middle blank in the char string is valid Legal meel 54 Cancel char include letter number underline subtraction sign and dot 2 There is no limit in the user and user team You can add or delete the user team according to user definition The factory setup includes user admin You can set Main Menu gt Advanced gt Account gt Modify Passw A the team as you wish The user can appoint the purview in the team User Name admin Old Mew 3 The user management includes team user The team and user name cannot be the same Each user only belongs to one team Confirm modify user Modify t
6. 4 None CAM6 None CAM 3 None between spots trail patrol and so on ae Wei Hlenu gt Alarm gt Video Blind screen hint Pop the alarm information dialog box in the local host computer screen Channel 1 EMAIL m means sending an email to user when the alarm is turned on Enable my Sensiivity Middle Note Set in the network service and send an email Period Set 4 3 2 Video Blind Alarm Output Delay Record Channel Tour When the environment such as bad brightness or reaching the set sensitive parameter PT Activation Sa i Delay 10 Sec influences the video image the camera mask function is turned on and the linkage function 1s Show Message send Email turned on Advanced 5 Cancel Set method refer to chapter 4 3 1 MER enu oA arm gt Video Loss 4 3 3 Video Loss Channel Enable When the equipment cannot obtain the channel video signal the video loss alarm is turned Period Alarm Output Delay on and the linkage function is turned on Record Channel Tour PTZ Activation Delay 10 Sec Show Message Send Email Buzzer Set method refer to chapter 4 3 1 44 Advanced Sae Cancel 4 3 4 Alarm input When the equipment obtains the external alarm signal the alarm function is turned on Set method refer to chapter 4 3 1 4 3 5 Alarm output Refer to chapter 3 5 4 4 4 System setup Set the system parameters such as general setup code setup network setup network service output mode PTZ control
7. NG SOPRANO CE am nescence saa thai ects ANE RO 68 APpendi REMOS COMO Er al iO enean a ser tra re a a eee 70 App ndix 2 MOUSE O PELA OA AA RA A AA A AA AAA ine SEA DA AAA ive eae ea ite ae at ia eee tant Neste acted ON AE 71 Appendixa Hardidisk capabilities cat 12 TO es IV AP a ace acetate a e a a a lect e E a A N 73 LNetWork Connec NOn a O 73 Dos Remote MONO TN ia A AA AA AA AA A ERE sedis 73 2 1 Central Management system client sottware tts Option Tor DVI tic 73 AN RR 74 a A a 75 Appendix 5 Mobile Montor Setani zenno eee A A AAA AAA AAA E TASA AAA AAA AAA E AE E Seatemade 76 Welcome Thank you for purchasing our DVR This manual is designed to be a reference tool for the installation and operation of your system Here you can find information about this series DVR features and functions as well as a detailed menu tree Before installation and operation please read the following safeguards and warnings carefully Important Safeguards and Warnings Do not place heavy objects on the DVR Do not let any solid or liquid fall into or infiltrate the DVR Please brush printed circuit boards connectors fans and machine box and so on regularly Before the dust cleaning please switch off the power supply and unplug it Do not disassemble or repair the DVR by yourself Do not replace the components by yourself Environment Please place and use the DVR between 0 C and 40 C Avoid direct sunlight Stay away from heat source Do not install
8. O E es ea ees 21 260 Alarm Output POLL TClay parameters sist A ARA AS RA SARA A SARA E AS AAA AS AAA A E E 22 Ao ALO MO A A A A A A eet nena ene 22 BAS OO iS dt E O A A A oia 24 Ss Bs Y IN sete soars ade Resist ea elon adi oases tae NN 24 DZ E OVER set AAA AAA AA AS ae ea ASA AAA AAA AAA A AAA AAA acetal a aaa 24 SN A A AA 25 O A A A A II E E A A se cug 29 De Oy MPVS ROP SV UU TIN MAA ease AAA AAA AA AA 26 Be SMe A RO A 26 ANV O a 21 Bi Dd Record Mode 22 aa ee AA AE AR AS ca RE ER E we eas Sete ea alae RE 29 A 30 a IIS AO O A E EE EATE E vot ENE ENESE EEEE EIEEE tate E EEE E atl EEEE EEEE E 30 A aa 35 RR 35 A Uaa E II aE Ta E E A Sree eT 36 EIN TON E NE eaa EAA N E E E E EE E E E E EER 36 AMan SAS TUN i SAI A EA AAA A Aa 37 4 Maien Havi taloneras eaa aaa a a a add dd ascetics cuttin tutte 31 A AA A A 39 2 E AAA PE RENO A A A sine taeda isbeinaenuatued sacoetetectactincstonenetestes 39 IN A A A Sans aes sat Senge cad Sasa daa ad we sages teas eta eres ee eee eee eee 41 423 Vide DACKU Piden A A AA A SRA AAA AAA AAA AAA At A 41 A O A A AI A A ne ere eee eI 42 Ab DIVE OND E o E EE E PEE TE E E E E I AEE EEE AEE EAT AE E E send al EA AE E EEI toda ten AE 42 ES AN era a E E EA E lee Reeiaila Nees 44 A N E EEE 44 Ae A A A EEEE E EEEE E EEEE E AT 45 2s oH 016 0 30 ae II II a e E E Oe 45 A SyS enr UN a E A A diia a ieee 45 441 Gencra LS cu Di A AAA AAA AAA AAA AAA AAA AAA ts tenicuratade dl 45 Pie MIN GS UII A A A Ss dalla as a O O A A
9. Save Cancel the current cursor area Yellow block means the dynamic detect defensive area Black block means 42 the unfenced area You can set the area as followed Drag the mouse and draw the area time section Trigger the motion detect signal in the set time section You can set according to week or set uniformly Each day is divided into four time sections m means the set valid SO Dt 78 1 ee eg interval JOnly one alarm signal is turned on even there are several motion detect signals in the set interval alarm output Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on delay Delay a few moments and stop when the alarm state is turned off The range is 10 300 seconds recording channel Choose the recording channel multiple option supportive Trigger the video signal when the alarm is turned on Note Set in the recording setup and perform the linkage recording Start detecting video files in the corresponding time section alternate patrol m means that the selective channel is single window alternate patrol preview The interval is set in the system setup gt alternate patrol PTZ linkage Set the PTZ linkage when the alarm is turned on Note PTZ linkage is set in the shortcut menu gt PTZ control Set the patrol Main Menu gt Alarm gt Motion Detect gt PTZ Activation CAM 1 None CAM 3 None CAMS5 None CAM None 43 CAM 2 None CAM
10. can set the following items Zoom Focus Aperture Direction and so on Click Setup button to go back Picture 3 14 Step4 Click End button to complete setup Click the right button of the mouse to exit 2 Scan Calls PTZ Config Function Pattern Preset Tour Pattern Begin Border End Patrol No In Picture 3 10 click Page Shift button then enter PTZ control menu as shown in Picture 3 12 Please input the number of scan in the value blank then click Scan button PTZ begins to work on the scan line Click Stop button to stop 4 Boundary Scan 1 Boundary Scan setup 33 Stepl In Picture 3 10 click Direction button to turn the PTZ to preset direction then click PTZ Contig Setup button enter Picture 3 15 select the left boundary return to Picture 3 10 R Step2 Please click direction arrows to adjust PTZ direction click Setup button enter Function Pattern Preset l l Patrol No Picture3 15 then select the right boundary return to Picture 3 10 Tour Pattern Left Step3 Complete setup that is the position of left and right boundary Border Right 2 Boundary Scan Calls In Picture 3 10 click Page Shift button then enter PTZ control menu as shown in Picture 3 12 Please input the number of scan in the value blank then click Scan button PTZ begins to work on PTZ Control the scan line Click Stop button to stop Direct Aux Oper 5 Horizontal Rotating Light Click Horizontally Rotating
11. channel image Left press mouse and control PTZ to rotate orientation Left press mouse and then rotate the mouse to adjust the zoom multiple of the camera setup Enter the function operation menu window switch Switch between different windows Special functions Pe REESEN PTZ Config Set a location for the preset calls the preset points PTZ automatically turn to the setting position 1 Preset option Function Preset Preset R i i Patrol No Set a location for the preset procedure is as follows aol INO Pattern Set Border Stepl in PTZ control click the Direction button will turn into preset position click the Settings button Del Preset to enter Picture Step 2 click the Preset button and then write the preset points in the input blank 31 Step 3 click Settings button return the PTZ control Complete setup that is the preset points and preset position corresponds Clear Preset Input preset points click Remove button remove the preset PTZ Control Preset 2 Preset Point Calls Tour In Picture 3 10 click Page Shift button enter PTZ control interface as shown in Picture 3 12 AutoScan AutoPan In the input blank write the preset points then click Preset button PTZ turn to the corresponding preset point Page Switch Cancel 2 Cruise between Points Multiple preset points connected cruise lines call cruise between points the PTZ run around PTZ Config on the line 1 Cru
12. no hard disk If the user needs to change the damaged hard disk you must shut down the DVR and take up all the damaged hard disks then install a new one Behind serial number means the current working disk such as 1 If the corresponding disk is damaged the information will display 58 Main Menu gt Advanced gt Upgrade Upgrade Position Upgrade file Upgrade Capacity Lett Capacity 0 00 MB 0 00 MB View recording times Cancel 4 6 2 Code stream statistics Channel KbiS L Display the code stream Kb S and hard disk capability MB H in real time It displays as the wave sketch map ow 0A AA u N a Wwe Woesrweoe w V 4 6 3 Log information Cancel Look up system log according to the set mode Log information include system operation configuration operation data management alarm NIC affair recording operation user management file management and so on Set the time section to Type Stan Time 2000 12 03 00 00 00 Search End Time 2000 12 04 00 00 00 Log Time Type LOG 2000 12 03 00 03 00 Log Out User dela 2000 12 03 00 03 00 Log In User admi 2000 12 03 00 03 14 File Search 2000 12 2 2000 12 03 00 12 59 ShutDown 2000 12 02 2000 12 03 00 12 59 Reboot 2000 12 02 2000 12 05 00 14 29 shut Down 2000 12 0 2000 12 03 00 14 29 Reboot 2000 12 02 2000 12 03 00 14 31 Log In User detar 2000 12 03 rte lan Che liser deta look up and click the look up button The log information will display as a l
13. the DVR in damp environment Do not use the DVR in smoky or dusty environment Avoid collision or strong fall Please insure the DVR level installation in a stable workplace Please install in ventilated place Keep the vent clean Use within the rating input and output scope 1 Production Introduction 1 1 Product overview The 4 8 16 CH series DVR is designed specially for security and defense field which is an outstanding digital surveillance product It introduces embedded LINUX operating system that is more stable It introduces standard H 264mp video compressed format and G 711A audio compressed format which insures the high quality image low error coding ratio and single frame playing It introduces TCP IP network technology that achieves the strong network communication ability and telecommunication ability The series DVR can be used individually or online applied as a part of a safety surveillance network With the professional network video surveillance software it achieves the strong network communication ability and telecommunication ability The series DVR can be applied in the bank telecom electric power system judicial system transportation intelligent housing factory storehouse water conservancy and so on 1 2 Main functions Real time surveillance Analog interface and VGA interface VGA interface is equipped selectively Surveillance function through monitor or display Storage Non working hard dis
14. the DVR ventilated for better heat radiator Please check the system and maintain regularly 69 Appendix 1 Remote controller operation L Jn 8 Alarm clear 17 Mute key mise 19 let anyone picture channel display in full screen a a MN mode REC SEARCH PLAYIPAUSE SLOW FAST STOP PTZ MUTE SWITCH o ALARN RESET WINDOW DVR Appendix 2 Mouse operation Take right hand as an example The mouse in USB connection is supportive Double click one item in the file list to playback the video Double click the playback video to zoom in or out the screen Double left click Double click the channel to make it full screen display Double click again to resume the multi window display Left click Choose the according function in the menu l l Pop desktop shortcut menu in preview state Right click Current shortcut menu in the menu Add or subtract number in the number setting Press middle button Switch the items in the combo box Page up or down in the list Move mouse Choose the widget or move the item in the widget Set the motion detect area Drag mouse Set the cover area 71 Appendix 3 Hard disk capability calculation Make sure the hard disk installed to install the DVR for the first time Pay attention to the IDE hard disk lines connection 1 Hard disk capability There 1s no limit for recording machine We recommend 120G 250G size to keep better stability 2 Overall capability option The hard disk capabil
15. the channels and open new channel Customers can adjust image mode upon opened video channels Close the channel Click right mouse at the channels which are needed to close Or choose to close all the windows to close opened video channels 7 Remote Operation to the DVR Config Right click mouse and choose DVR Config at the preview window Set DVD s parameter Config including video function system function tool management system information and so on 75 Appendix 5 Mobile Monitor Set Server 060 114 pa admin Password gt om Lis Mobile requirements frequency 400HZ and above Window Mobile systems to support WIFI or 3G TD SCDMA espe WCDMA CDMA2000 in one 1 set the DVR 1 set up a network DVR the need for DDNS setting follow the instructions to set up 2 The combination of coding operation to open the main menu system settings encoding settings click combined coding 3 set up to save the system will automatically restart 2 set the phone 1 Set up the phone View mode 2 Software Installation Open the phone comes with IE in the address bar type http Device IP Address mns cab as follows 10 6 0 114 for my device IP address http 10 6 0 114 mns cab Follow the prompts to install the software MNS 3 Mobile View Double click the MNS run a cell phone monitoring software In Server type device IP address and TCP port number My device IP address 10 6 0 114 TCP port 34567 In t
16. 255 Gateway 192 Primary DNS secondary DNS network card You can choose cable network card or wireless network card TCP Pon DHCP Enable Obtain IP address automatically HTTP Pon HS Download Note DHCP server is preinstalled Transler Policy Quality Prefer IP address Set the IP address Default 192 168 1 10 subnet mask code Set the subnet mask code Default 255 255 255 0 Cancel default gateway Set the default gateway Default 192 168 1 1 DNS setup JDomain Name Server It translates the domain name into IP address Network provider offers the IP address The address must be set and reboot then it works lenu gt System gt NetService TCP port Default 34567 Net Server Net Server Info UDP port Default 34568 PPPOE 0 NTP 0 NTP 10 HTTP port Default 80 EMAIL 0 Your SMTP Server 25 IP FILTER O 0 0 Max Connection Network user connection number the set range is 0 10 DDNS DDNS Set Invalid LAN Download network transmission strategy There are three strategies Self adaptation image quality precedence and fluency precedence The code stream will adjust according to the setup Self adaptation is the tradeoff between the image quality precedence and fluency precedence Fluency precedence and self adaptation are valid only when the assistant code stream is turned on Cancel Otherwise image quality precedence is valid Main Menu gt System gt Netservice gt PPPOE Enable af
17. 4 8 16 Channel H 264 Standalone Digital Video Recorder User Manual Quality and appearance of the perfect charm Thank you for purchasing this offering A serch es et ci tee ie elle elt Rr ls ete ac E i et ee le cece ot ls it eee is pe als tly Reto Reeth esis S 5 MmportantsSateonards and O little at iii 5 EOIN ENa a tales dened neaaai anni cue aanelesed A beunlsse grea eubGoumiceasatae ds Geobieueouuess 6 l Production TIA OU C10 i sar see dee AAA AD A AN ebb ete ete AAA AAA AAA AN A A A keener hd abe en ame ddte 7 A is O LU Bee A A A NT me eet A A A A a Meme E Aen ae 7 CANARIOS ea EIN di CIA E E E IE IE ETE AE E AEEA J 2 Open packase check and cable Conneccion aer T A E ec ae a Doles eae ed a at 9 DN Open packade CNG CN a AS SAS AAA AAA AA A AA AAA AA AAA A E E E EE ASA AA A E 9 A Hardas kostala AAA A A I 9 A IM eee ects een ee ects a a eee cece Sere a eal ee eaittee nal ease eaitten a a A mute cetesuniot 10 DA Rea panelist iticietee eis O Ea 14 2 5 Audio and Video npuland OULPUL Connections 100 da 16 2 REA CO MUG OMe CULO ING Sone tn cite hte A A A A ET 16 25 2 Vdeo output connections and Options estic ide ii 17 el A TT i rs TT fr a a rs eae a en ea 17 29A ALO Sl QUOC sexta dec E A AA A A A AAA AAA AA diet dete a te a AS 18 20 lai tap Ul aia ompr COMEN da nad EE don 18 Pe SA Lo Lo o LAO 6 HORS ola 6 BUI Cts 10161 te men ean NNER mn nen it rn AE iy Pa a n a OY Yn ee Ee 21 DO Fulani Output port SPC ClL1C At ON sy iS naa cs Sg
18. One is read write disk and the other is redundant disk Refer to 4 5 1 length Set the time length of each video file 60minutes is default value prerecording Record 1 30 seconds before the action The code stream decides Time length recording control Set video state Configuration all or stop configuration Record according to the set video type common detection and alarm and time section all Click the all button and the according channel is recording no matter the channel in any state stop Click the stop button and the according channel stops recording no matter the channel in any state time section Set the time section of common recording The recording will start only in the set range recording type Set recording type Regular detection or alarm regular Perform the regular recording in the set time section The video file type is R 40 99 66 detection Trigger the motion detect camera mask or video loss signal When above alarm is set as opening recording the detection recording state is on The video file type is M alarm Trigger the external alarm signal in the set time section When above alarm is set as opening recording the detection recording state is on The video file type is A Note Refer to chapter 4 3 to set corresponding alarm function 4 2 2 Video playback Refer to chapter 3 5 2 4 2 3 Video backup You can backup the video files to extern
19. Status lights Green lights for network The network cable directly into the network connection and the normal interface after the panel lights connection Video Status lights Green lights to open the video and Equipment installed hard disk press the button to 12 the device is recording open the video panel after the lights _ Control Receiver Aligned using a remote control remote control can Terminal operate Software Power switch Running in the system directly boot Software Shutdown Hold down the button and 3 Q software shutdown and software seconds with the progress demonstrated that the system into the software turned off the power light eliminate Software start You must start before enter ing the software clicking on this button that can be opened to the power lights Function calls key Special function keys To use some special features you can call the FN functional set up or operation of Video Search Retrieve the video files can be directly Into the camera s PTZ Control Where in the system set up after set up PTZ into a PTZ single screen Click button to enter PTZ control window which can operate the camera 7 Main Menu Transferred out of the system Main Press the function can be directly transferred out O Menu of the system main menu ES a ma Video Switches Button brings up the window closed to open video ta Keys The cursor keys the key is to Control the direction of the cursor in the
20. a a acess teenies ia taatacudan 46 HAN CODES SU it ii E A A A E enti 47 AAN E LW OT SV A A A o ae 48 44S Oump t modernesnis E ET E E E A A A cl a atet A canal E E octets Sates eaaetd 51 FAPTA IA A A A ib te a i ce ele Ree A de dec sas Susann E 52 ATS Gila OLS A II II A II A II teats tenors A oer etecatt 53 A AS UU ate iat O IN oe os i ora arse ies a A II O ats ohare aia haem see hase h Neca asennad 53 AD INA a OCG ME LOO Si ae 54 A Ml ere GC OUR A E 54 A US SCR mando CIC IN sre SAA A AAA ATAN ASE AAA AR a i ae as ah atte nen AR 54 Ab i MM A ceca gait tp ce cel ib atte lessee se ti ele een ee is peal i cee bate ele Sapte ttn eto arte RGN E cya eR A 56 AAI ACIS Ursa E r ett netseiaalse nade als A A wae cinatcinn de atet waa as ete nae Cusstonactserecadtusdisedstohe 57 ADs UO MANE TATA CS esi tiv eek sae isa Sas ack se stas lay Saad ca ueae cae setae ots Gacaaawni A E E 57 430 Resume de nai AAN A ASA eae A NAAA AA ARANA Adan Ai E I 57 7 is 0 A o 92 fa G Cc nee O a ToT Oe BP TOTAA T IN TAIA ty AP T Ey ee T En Ve a Ome eet E A 58 i OMe Nc A o AAA A ee mere Ome ner REMC etme ner II PEM Rey EP er Pm amas enEae CRETE Per Emer eer me ner Em Peer em ner eee er E ct ee 58 A UN O es un OT en eee Oma 58 AO C ode SUS Am SAS OS AA AAA AAA IAEA A AAA AA SAA AAA AAA E A lees E E 59 Aor UV MIA A A A A A 59 Gh ULL Li AO MLO A A A A A A A A A A 60 ASS AOS Y A a ie o 60 5 FAO ADO ACA A ii 61 A A IA II A AA eee ee mee ene me aN ee E Ta 61 ERAI E a
21. al storage through setup lenu gt Record gt Backup Note The storage must be installed before the file backup If the backup is terminated Name Type Remain Total Detect the already backup can playback individually Backup Erase detect Detect the storage connected with the DVR such as hard disk or universal disk Stop erase Choose the file to delete and click erasure to delete the file stop Stop the backup backup Click backup button and the dialog box is popped up You can choose the backup file according to the type channel and time Cancel 41 remove Clear the file information add Show the file information satisfying the set file attributes start pause Click the play button to start the backup and click the pause button to stop the backup cancel During backup you can exit the page layout to carry out other functions 4 3 Alarm Function Alarm functions include motion detect camera mask video loss alarm input and alarm output 4 3 1 Motion Detect Channel Enable b When system detects the motion signal that reaches the set sensitivity the motion detect alarm is on and the linkage function is turned on channel number Choose the set motion detect channel enable m means that the motion detect function is on sensitivity Choose in the six options according to the sensitivity area Click setup and enter the set area The area is divided into PAL22X18 Green block means Advanced
22. ameter of DVR audio signal is greater than 200mv 1K BNC which can connect the low impedance earphone and active sound box or other audio output equipments through power amplifier If the sound box and the tone arm can not be isolated howling phenomena is often existed There are some methods to deal with the above phenomena 1 Adopt better directional tone arm 2 Adjust the sound box volume to be under the threshold that produces the howling phenomena 3 Use fitment materials that absorb the sound to reduce reflection of the sound 4 Adjust the layout of the sound box and the tone arm 2 6 Alarm input and output connections 1 Alarm input A Alarm input is grounding alarm input B Alarm input demand is the grounding voltage signal C When the alarm is connected with two DVRs or connected with DVR and other equipments it should be isolated by relay 2 Alarm output Alarm output can not be connected with high power load no more than 1A When forming the output loop 1t must prevent the big current from relay damage Use the contact isolator when there 1s a high power load 3 PTZ decoder connections A The grounding of the PTZ decoder and DVR must be shared otherwise the common mode voltage will lead to the PTZ control failure The shielded twisted pair is recommended Avoid the entrance of high voltage Make the layout reasonably Take precaution from the thunder In the outlying end connect 120Q resistance paralleled to reduce th
23. ameters to avoid the overload that damages main machine 21 2 6 3 Alarm output port relay parameters Type JRC 27F resistance load IZoVA 160W 250VAC 220VDC 1A Inhomo polarity interface 1000VAC 1 minute Interface and winding 1000VAC 1 minute I50OVAC 10 160us Longevity 50X106 MIN 3Hz 200 103 MIN 0 5Hz 2 7 Speed dome connections 1 Connect the 485 lines of the speed dome with the DVR 485 interface 22 2 Connect the video line with the DVR video input 3 Electrify the speed dome 23 3 Basic operation Note The button in gray display indicates nonsupport 3 1 Turn on Plug the power supply and turn on the power supply switch Power supply indicator light shining indicates turning on the video recorder After the startup you will hear a beep The default setting of video output is multiple window output mode If the startup time is within the video setting time the timing video recording function will start up automatically Then the video indicator light of corresponding channel is shining and the DVR is working normally Note 1 Make sure that the input voltage corresponds with the switch of the DVR power supply 2 Power supply demands 220V 10 50Hz Suggest using the UPS to protect the power supply under allowable conditions 3 2 Turn off There are two methods to turn off the DVR Entering main menu and choosing turn off in the turn off the system option is called soft switch Pressin
24. are as followed 1 The image quality is too bad 2 The reading program is wrong Reboot up the DVR 3 The data line of the hard disk is damaged 4 The hard disk is damaged 5 The hardware of the DVR is damaged 8 There is no audio signal in the surveillance window Possible reasons are as followed 1 Ttis not an active tone arm 2 Itis not an active sound box 3 The audio lines are damaged 63 4 The hardware of the DVR is damaged There is audio signal in the surveillance window but mo audio signal in the playback state Possible reasons are as followed 1 Setting issues the audio option is not chosen 2 The according channel is not connected with the video The time is wrong Possible reasons are as followed 1 Setting is wrong 2 The battery is in bad connection or the voltage is too low 3 The oscillation is damaged The DVR cannot control the PTZ Possible reasons are as followed 1 There is something wrong with the frontal PTZ 2 The setting connection or the installation of the PTZ decoder is not correct 3 The connections are not correct 4 The PTZ setting of the DVR is not correct 5 The protocols of the PTZ decoder and the DVR are not matched 6 The address of the PTZ decoder and the DVR are not matched 7 When multiple decoders are connected the far port of the PTZ decoder line A B must connect a 12092 resistance to reduce the reflection otherwise the PTZ control is not stable 64 8 The distance is too far 12 The
25. button PTZ begins to rotate horizontally relative to the original Aux Num Oper position of the camera Click the Stop button to stop 6 Rotate Click on horizontal Rotating button PTZ turn around 7 Reset in PTZ restart all the data clears to 0 8 Page Shift In Picture 3 12 click Page Shift button into Picture3 16 setting auxiliary function Auxiliary number corresponding to auxiliary switch on the decoder Intuitive Auxiliary Operation choose auxiliary equipment select Open or Close button switch control 34 Auxiliary Number The operation of corresponding auxiliary switch according to PTZ agreement Page Shift In Picture 3 16 click Page Shift button enter the Picture 3 17 PTZ Main Menu the menu itself can be control by the menu control buttons 3 5 6 Color setting Set the selective image parameters current channel for single window display and cursor place for multi window display You can use the desktop shortcut menu and enter the interface The image parameters include tonality brightness contrast and saturation You can set different parameters at different time sections 3 5 7 TV adjust Adjust TV output area parameters You can use the desktop shortcut menu or enter main menu gt management tools gt TV adjust Output Adjust Top Deflate E Bottom Deflate Y Left Deflate a Right Deflate B Cancel 35 3 5 8 Logout Logout shut down the system or reboot up You can use
26. ction Button Function y Slow play Fast play Previous frame Next frame Table 3 2 Playback control key Note Frame by frame playback is only performed in the pause playback state operation hint Display the function of the cursor place Special functions Accurate playback Input time h m s in the time column and then click play id button The system can operate accurate playback according to the searching time Local zoom When the system 1s in single window full screen playback mode you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom You can right click mouse to exit 3 5 3 Record Mode Please check current channel status O means it is not in recording status meansitisin __ _ Record Mode recording status Record Mode 12345678 You can use desktop shortcut menu or click main menu gt recording function gt recording set to enter Schedule Manual 00000000 R the recording control interface Stop configuration Record according to the configuration Cancel All Click the all button and the according channel is recording no matter the channel in any state stop Click the stop button and the according channel stops recording no matter the channel in any state 29 Main Menu gt Alarm gt Alarm gt 3 5 4 Alarm output Alarm Type All Auto Manual Please check current channel status O means it is not in alarm
27. d l 2 3 4 5 The re writ able machine and the hard disk are shared the same data lines The data is too much Please stop recording and backup The data exceeds the backup storage The backup equipment is not compatible The backup equipment is damaged The keyboard cannot control the DVR Possible reasons are as followed l The serial port of the DVR is not set correctly 66 2 The address is not correct 3 When multiple transformers are connected the power supply is not large enough Please give each transformer individual power supply 4 The distance is too far 18 Alarm cannot be recessional Possible reasons are as followed 1 The setting of the alarm is not correct 2 The alarm output is turned on manually 3 The input machine is damaged or the connections are not correct 4 There are some problems for specific program edition please update the program 19 Alarm is not working Possible reasons are as followed 1 The setting of the alarm is not correct 2 The connection of the alarm is not correct 3 The alarm input signal is not correct 4 An alarm is connected with two loops synchronously 20 The remote controller is not working Possible reasons are as followed 1 The remote control address is not correct 2 The remote control distance is too far or the angle is too large 3 The battery is used up 67 4 The remote controller or the front panel of the recording machine is damaged 21 The s
28. e file to backup file backup Backup the chosen file Click the button and operate as followed atan Time 00 12 05 14 33 42 Note The storage must be installed before the file backup If the backup is End Time 00 12 05 14 33 42 9 Size KB terminated the already backup can i er at Uy E enu gt Record gt PlayBack gt Backup A playback individually Name Type RemainTotal PSS Backup Ca 3 m A ee P a ee o A A a E E a E e Backup Detect Detect the storage connected with the DVR such as hard disk or universal disk Cancel Erasure Choose the file to delete and click erasure to delete the file 21 Stop Stop the backup Backup Click backup button and the dialog box is popped up You can choose the backup file according to the type channel and time Remove Clear the file information Add Show the file information satisfying the set file attributes Start Pause Click the play button to start the backup and click the pause button to stop the backup Cancel During backup you can exit the page layout to carry out other functions Search Condition File Type All Channel Start Time 2000 12 03 00 00 00 file searching Search the file according to the searching parameter File type Set the searching file type Channel Set the searching channel Can cel Start Time Set the searching time scans playback control Refer to the following sheet for more information Button Fun
29. e inflection and insure the signal quality Y A y The 485 AB lines of DVR can not connected with other 485 output equipments paralleled E The voltage between the AB lines of the decoder must be less than 5V 4 Front equipment grounding note Bad grounding can lead to the burnout of the chip 5 Alarm input type unlimited The DVR alarm output port is constant opening type 6 7 8 iti 2 13 4 16 CH Alarm Terminal 4 8 CH Alarm Terminal 1 RS485 2 Alarm output 1 1 Alarm input 1 2 GND 3 GND 4 Alarm output 2 3 Alarm output 4 RS485 5 Alarm input 8 6 Alarm input 1 4 7 GND 8 Alarm input 5 7 Parameter Meaning G Grounding Cl NOI Alarm output interface constant open type 485communication interface which is connected with the recording 20 ay control equipments such as the decoder 2 6 1 Alarm input port specification 1 channels alarm input Alarm input type unlimited The grounding and the com port of the alarm sensor are parallel The alarm sensor is external power supply The grounding of the alarm and the DVR should be shared The NC port of the alarm sensor must be connected with the DVR alarm input port The grounding of the power supply and the alarm sensor must be shared when used in external power supply 2 6 2 Alarm output port specification 1 channels alarm output There is external power supply when using the external alarm equipment Please refer to the relay relevant par
30. ent user Choose the user and click delete user button delete team Delete the current team Choose the team and click delete team button ml li LJ 4 5 3 online user Cancel Look up the network user information in the local DVR You can choose the network user and cut E ARlenu gt Advanced gt Online User the connection Then the user is locked until next bootstrap User Name IP Login Type Disconnect Cancel 56 4 5 4 TV adjust Refer to chapter 3 2 7 4 5 5 Auto maintenance The user can set the auto reboot time and auto file deleting time limit 4 5 6 Resume default The system resume to the default setup You can choose the items according to the menu 57 Main Menu gt Advanced gt AutoMaintain Every Tuesday Never Cancel hNenu gt Advanced gt Restore Please select setting entnes that you want to default Select all ya b General Encode ar Record Contig M AlarmSet NM NetWork E NetSenice M GUI Display RS232 Account i The Service of Net IP Fiter DHCP DDNS Email NTP Multcasting DNS PPPOE Cancel 4 5 7 Upgrade upgrade choose USB interface upgrade file choose the file which needs upgraded 4 6 System information 4 6 1 Hard disk information Display the hard disk state hard disk type overall capability residual capability the recording time and so on Clue means that the hard disk is normal X means that the hard disk is broken down means that there is
31. g the power supply switch is called hard switch Illumination 1 Auto resume after power failure If the DVR is shut down abnormally it can automatically backup video and resume previous working status after power failure 2 Replace the hard disk Before replacing the hard disk the power supply switch in the real panel must be turned off 3 Replace the battery Before replacing the battery the setting information must be saved and the power supply switch in the real panel must be turned off The DVR uses button battery The system time must be checked regularly If the time is not correct you must replace the battery we recommend replacing the battery every year and using the same battery type Note The setting information must be saved before replacing the battery otherwise information will lose 3 3 Login When turn on the DVR the system will automatically to show the SYSTEM LOGIN interface please see the SYSTEM LOGIN picture then you can login under admin user name and the password is empty the system provides the User Name admin l l l Password corresponding functions with the admin purview There are another two user settings The names are default and Please Login guest the password of them is also empty OK Cancel Password protection If the password is continuous wrong three times the alarm will start If the password is continuous wrong five times the account will be locked After reboot or half an hour t
32. he User and Password enter User name and password default user admin password blank Set up and click Login Login 76 Warranty Gard NO A AAN MER O CT AAA DI AAN Cros o OOOO Com a A AAA GT NN wesse O Cow AAN om APPLICATION RECOMMENDAT ON FREE REPAIR GUARANTEE ONE YEAR AFTER SELL SHOW ON PHYSICAL DAMAGED 71 MAINTENANCE RECORD DATE SYMPTON CAUSE OF ACCEPTANCE ISSUED BY FAILURE Approach 78 PH8 DVR_ENG MENU V2 0 The information is subject to changes without prior notice 79
33. he account will be unlocked automatically For your system security please modify your password after first login 4 5 2 3 4 Preview You can right click mouse to choose the switch between the windows The system date time and channel name are shown in each viewing window The surveillance video and the alarm status are shown in each window 25 ee vos 2 E roion a B camrtock Table 3 1 Preview icons q 111 3 5 Desktop shortcut menu gt gt Record In preview mode you can right click mouse to get a desktop shortcut menu The menu includes main menu video playback video control alarm output PTZ control color setup TV adjust shut down system window FA switch Advanced a Cancel Main Menu Record Mode PlayBack PTZ Control When you login the system main menu is shown as below HighSpeedPTZ Alarm Output Color Setting Output Adjust Logout 3 5 1 Main menu View 4 R View 3 View 9 26 3 5 2 Video playback There are two methods for you to play the video files in the hard disk 1 Inthe desktop shortcut menu 2 Main menu gt video recording gt video playback Note The hard disk that saves the video files must be set as read write or read only state 4 5 1 Cameras i i Start T ree Tuna O EIEII R k 1 3 File searching 4 Playback control 1 Listed files 2 File backup listed files Look up the listed files that accord with the searching criteria file backup option Choose th
34. he existed user attribute modify team Modify the existed team attribute modify password Modify the user password You can set 1 6 bit password The blank ahead or behind the char string is invalid The middle blank in the char string is valid Note The user who possess the user control purview can modify his her own or other ica aca ec e user password User Name Reuseable Password Confirm add user Add a user in the team and set the user purview Enter the menu interface and Memo GROUP admin input the user name and password Choose the team and choose whether cover using the user 7 0 Authority l l Shutdown the device Cover using means that multiple users can use the account at the same time 2 E Channel Title E Schedule Once choose the team the user purview is the subclass of the team El Backup E HDD Management We recommend that the common user s purview is lower than the advanced user PTZ Control Account Cancel 39 Le ers m en 1 rei Mlenu gt Advanced gt Account gt Add Group Name 123 Memo add team Add a user team and set the purview There are 36 different purviews shut down the O Authority E Shutdown the device E Channel Title EJ Schedule E Backup E HDD Management t1 PTZ Control E Account E Query System Info E Query Log Info EJ Clear Log E System Update equipment real time surveillance playback recording setup video file backup and so on delete user Delete the curr
35. ids to download please affirm whether AO El F install other prohibiting download plug in or reduce IE security level ae ee om T j F pti T o wr 5 D D Pop up as follows interface after connecting successfully Note when first login the system will cost 2 3 minutes to register Step2 Login Enter user s name and password the default Administrator User ID is admin and the password is empty The user should change the administrator s password timely after loginning in You will see as follows interface after loginning in a pE ESTIT 74 Picture Web Login Interface 3 Basic Web Operation Do web operation in picture 6 web operation interface 1 Screen Split Choose image preview mode 4 Playbacks Enter playback mode which supports multi channel playing back simultaneously 3 Log Display log information 5 Local Config Pictures WEB operation interface Operate alarm set up on the web end and look up edition information of the web system 6 channel operation Open the videos Left click and choose a widow in the left and choose the corresponding channel in the right then double click the video Open the second channel s video choose the left window then select the corresponding channel in the right after then double click the video Opening other channels is the same way If you have chosen the window of opened video then open other channels in the right the system will close all
36. ing status means it is in alarming status Stop Status You can use desktop shortcut menu or click main menu gt alarm function gt alarm output to enter the alarm output interface Cancel configuration Alarm is on according to the configuration A11 Click the all button and the according channel is alarming no matter the channel in any state stop Click the stop button and the according channel stops alarming no matter the channel in any state PTZ Control 3 5 5 PTZ control Speed Zoom E Operation interface is as followed The functions include PTZ direction control step zoom focus iris Focus M Iris ES setup operation patrol between spots trail patrol boundary scan assistant switch light switch level rotation e and so on Pe Trace Page Switch Notel Decoder A B line connects with DVR A B line The connection is right Cancel 2 Click main menu gt system configuration gt PTZ setup to set the PTZ parameters 30 3 The PTZ functions are decided by the PTZ protocols step Set the PTZ rotation range Default range 1 8 zoom Click button to adjust the zoom multiple of the camera focus Click button to adjust the focus of the camera iris Clickea button to adjust the iris of the camera direction control Control the PTZ rotation 8 directions control is supportive 4 directions in Front panel is supportive high speed PTZ Full screen show
37. ise Between Points Settings Function R Preset 1 be Hepa Preset Cruise lines is connected by multiple preset points setting procedure is as follows Tour Patrol No 1 Step1 In PTZ Control Picture the Direction key will turn PTZ to designated location click Pattern Add Preset Border Del Preset Del Tour Settings button to enter PTZ Config Step 2 click Cruise buttons the write proper value into the Cruise Line and Preset Points blank then click Add Preset Points button complete setting also can add and delete cruise line which has been set up Step 3 repeat step and step2 until set out all the preset designated cruise lines Remove Preset Please input preset value in the blank click Remove Preset button and then remove the preset points 32 Remove Cruise Line Input the number of cruise line click Remove Cruise Lines button then remove the cruise lines set 2 The Calls of Cruise between Points In PTZ Control Picture click Page Shift button enter PTZ control menu as shown Please input the number of cruise in the value blank then click Cruise between Points button PTZ begins to work on the cruise line Click Stop button to stop cruise 3 Scan PTZ also can work on the preset scan line repeatedly 1 Scan setup Stepl In PTZ Control click Setup button enter Picture Step2 Click Scan button the input proper value in the scan value blank Step3 Click Start button enter Picture3 10 here you
38. ist One page is 128 a en items Press Page up or Page down button to look up and press delete button to clear all the log information AM ACA Remove Cancel 59 4 6 4 Edition information Display the basic information such as hardware information software edition issue data and VG Zlenu gt Info gt Version SO on Record Channel 3 Extra Channel 0 Alarm In 1 Alarm Output 1 System V2 00 R05 4 7 Shut n tem Shut down syste Build Date 2010 01 13 15 35 11 Refer to chapter 3 5 8 60 5 1 FAQ 1 5 FAQ and maintenance If the problems are not listed please contact the local service or call the HQ service We are willing to offer the service The DVR cannot boot up normally Possible reasons are as followed l 2 7 The power supply is not correct Switch power supply line 1s not in good connection Switch power supply is damaged The program updating is wrong The hard disk is damaged or the hard disk lines are broken The front panel is damaged The main board of the DVR is damaged The DVR reboots automatically or stops working after boot up a few minutes Possible reasons are as followed l 2 The input voltage is not stable or too low The hard disk is damaged or the hard disk lines are broken The power of the switch power supply is low Frontal video signal is not stable 5 Bad heat radiator or too much dust or bad running circumstance for the DVR 6 The hardware of
39. ity formula is Overall capability M channel number time hour capability in an hour M hour The recording time formula is 11 bility M Recording time hour overall capability M Capability in an hour M hour channel number The DVR introduces the MPEG4 H 264 compression technology Its dynamic range is very large so the hard disk capability calculation is based on the estimation values of each channel creating files in an hour Example The video files in each channel need 200M capabilities in an hour For 4 channels and one month 24hours a day the needed hard disk capability is Achannel 30days 24hours 200M hour 576G So it will need one 500G hard disks 12 Appendix 4 Remote Control 1 Network Connection Before web operation you need to connect the equipment with internet Step1 Connect the equipment with the internet correctly Step2 Set LAN following to the eighth term Network Setup in reference manual s first part Step3 when LAN is connected 1t needs to set up port mapping for public network access Please refer to CD Network Setting Guidance for details Note Network segment between the equipment and PC must be consistent 2 Remote Monitoring After connecting the network two kinds of methods can be used for remote monitoring which are multi machine clients and common browser Milti machine client software 1s professional software used in multi equipments monitoring which is safe convenient and stab
40. k dormancy processing which is convenient to radiate heat reduce power and extend the life span Special storage format which insures the data safety Compression Real time compression by individual hard disk which insures the audio and video signal stable synchronization Backup Through SATA interface and USB interface such as USB equipment removable hard disk and so on Through net download the files in the hard disk Playback Individual real time video recording as well as searching playback network surveillance recording check downloading and so on Multi playback mode zoom at arbitrary region Net operating through net tele surveillance in the real time tele PTZ control tele recording check and real time playback Alarm linkage Multi route relay alarm output which is convenient for the alarm linkage and light control at the spot Protecting circuits at the alarm input and output interface which protects the main machine from damage Communication interface RS485 interface which fulfills the alarm input and PTZ control Standard Ethernet network interface which fulfills the telecommuting function intelligent operating Mouse action function Fast copy and paste operating for the same setting 2 Open package check and cable connections 2 1 Open package check When you receive the DVR please check first First please check whether there is any visible damage to the package a
41. le It is the better one that we advise customers use it And the browser comes with system such as IE browser 2 1 Central Management System client software it s option for DVR The client SNS software can be managed say over 200channnel video comes from the different locates through LAN or internet in one PC system 73 Picture 6 SNS Interface Stepl You can get the CD software of SNS from our distributors what you order from them Step2 After installing this software at the local PC then open the operation system as in picture 2 7 click at the upper right corner and enter DVR information which is needed manipulating following the prompts in that way you can manipulate any specified equipment And the method is the same with web manipulation s step 3 You can add several DVR more to do monitor operation if you repeat this operation 2 2 WEB After the network connecting using the browser comes with computer login DVR to do remote monitoring Stepl Connect the equipment Open web browser then enter IP address on the address bar of the equipment For example the IP address of the equipment is 10 6 0 114 and then you should enter http 10 6 0 114 on the address bar to connect If PC is connected at its first time and its system will pop up security warning whether accepts web cab when you open it We advise you to accept it so the system will install through its automatic identification If the system forb
42. length You can control the PTZ and vidicion Default 115200 adib gt m date bit Include 5 8 options Default 8 Cance 52 stop bit Include 2 options Default 1 check Include odd check even check sign check blank check Default void NUS JU HRS Se Function Console Baudrate 115200 Data Bits 8 Stop Bits 1 Parity None 4 4 7 Serial port setup serial port function ICommon serial port is used to debug and update program or set up specific serial port Save Cancel baud rate Choose the corresponding baud rate length data bit Include 5 8 options VEA lenu gt System gt Tour stop bit Include 2 options Enable Tour check Include odd check even check sign check blank check Interval 5 Sec View 1 1213 R405 760773 View 4 142 4 4 8 Patrol setup View 8 2131415161718 View 9 ie Set the patrol display Y Means that the patrol mode is turned on You can choose the single window four windows nine windows sixteen windows patrol display or single display 53 z MEL FAlenu gt Advanced gt HDD Nanage interval Set the patrol switch interval The set range is 5 120 seconds O HDD No Type Status Disk Read Write Read only Note Means turn off on the patrol 7 Redundan Format Disk 4 5 Management tools Recover Partition 4 5 1 Hard disk management Configure and manage the hard disk The menu displays current hard disk information hard
43. motion detect is not working Possible reasons are as followed 1 The time range set is not correct 2 The motion detect area set is not correct 3 The sensitivity is too low 4 Limited by some hardware edition 13 I cannot login via web Possible reasons are as followed 1 The system is windows 98 or windows me We recommend updating to windows 2000sp4 or higher edition or installing the software for low edition 2 ActiveX is hold back 3 The edition is not exceeded dx8 1 Update the display card driver 4 Network connection failure 5 Network setting issues 6 Invalid password or user name 7 The user edition is not matched the DVR program edition 14 The image is not clear or there is no image in network preview state or video file playback state Possible reasons are as followed 1 Network is not stable 2 The user machine is resource limited 65 15 16 17 6 Choose the play in team mode in the network setup of DVR The region shelter or channel protection is set The user has no surveillance purview The real time image of the hard disk recording machine itself is not clear Network connection is not stable Possible reasons are as followed l 2 3 4 Network is not stable IP address is conflicted MAC address is conflicted The network card of the computer or the hard disk recording machine is bad There is something wrong with the USB backup or writing a CD Possible reasons are as followe
44. nter the channel name menu Modify the channel name The 16 Chinese characters and 25 letters are supportive 51 time title m means the selective state Display the system data and time in the surveillance window channel title m means the selective state Display the system channel number in the surveillance window recording status m means the selective state Display the system recording status in the surveillance window alarm status m means the selective state Display the system alarm status in the surveillance window code stream information m means the selective state The ninth window displays the code stream information in the nine window preview status transparency Choose the background image transparency The range is 128 255 resolution set display resolution channel Choose the set code output channel number cover area m means the selective state Click the cover area button and enter the corresponding channel window You can cover the arbitrary using mouse Nenu gt System gt PTZ Con g 4 4 6 PTZ setup Channeli i Protocol PELCOD Address 1 Baudrate 9600 channel Choose the dome camera input channel 3 Data Bits 8 protocol Choose the corresponding dome protocol PELCOD as an example Stop Bits 1 Parity address Set as the corresponding dome address Default 1 Note The address must be Monitors consistent with the dome address baud rate Choose the corresponding dome baud rate
45. ppearance The protective materials used for the package of the DVR can protect most accidental clashes during transportation Then please open the box and get rid off the plastic protective materials Check whether there is any visible damage to the DVR appearance At last please open the machine crust and check the data wire in the front panel power wire the connection between the fan power and the main board Front panel and rear panel The key function specification in the front panel and the interface specification in the real panel are in the specification Please check the product type in the front panel whether is accordant with the product type you order The label in the real panel is very important for the after service Please protect it carefully When you contact us for after service please provide the product type and serial number in the label 2 2 Hard disk installation For the first use please install the hard disk connect the power wire and Cable Installation of the superstructure the first front end alignment 8 The back end gently break apart and under the pressure Gehao 2 3 Front panel Front panel diagram please mainly in kind WERO LANO RECO Pu I AUT Y O CT a o TT AD Digital Video Recorder 000 POWER LAN REC en SEE S FOR ARTS POWER Power status light Red lights for the start state Then after power up open the rear panel power switch lights Network
46. preview identify and invoke the main menu where you can switch by 1 4 8 9 16 points on screen display Co Can connect USB devices U disk upgrade or mouse and other USB devices ep 13 Video playback or pause Video playback and pause button Playback can be directly transferred out of the window group back to video playback and Pause For video upside down The video can be played into the upside down SLOW Play video on the operation of the There are four slow motion according to one plus slow release one is added automatically return to a four Quick release For broadcast video operators to There are four quick release according to one plus quickly release one is added automatically return to a four playing video Stop being playing video 16 Back Cancel Back to an operation or cancel the Back to an operation or cancel the current ESC current operation operation 2 4 Rear panel 4 CH rear panel diagram schematic please mainly in kind i 1 AM UT AUDIO AUDIO el w Ih OUT HET o 1 m AAO O0 co a Ny j i d i i _ i P VI DECHOUT _ ie l d es AUD HOUT LO 11h USE BAGELP E 4 l USB MOUSE 8 CH rear panel diagram schematic please mainly in kind Y y 3 RES O g Lebd UD 0 H USEI BACKUP iiia Ube ROUSE vib Or O 3 ADIHUT O OC ojo o A _ _ __ I 1581 BAQILP 1582 MOLES
47. r video compensation equipment and transmit by fiber to insure the signal quality The video signal line should be away from the electro magnetic Interference and other equipments signal lines The high voltage current should be avoided especially Insure the connection stable and credible The signal and shield lines should be firm and connected credible which avoid false and joint welding and oxidation 2 5 2 Video output connections and options The video output is divided into PAL NTSC BNC 1 OVp 752 and VGA output selective configuration When replace the monitor by the computer display there are some issues to notice 1 Do not stay in the turn on state for a long time 2 Keep the computer display normal working by demagnetizing regularly 3 Stay away from the electro magnetic Interference TV is not a credible replacement as a video output It demands reducing the use time and control the power supply and the interference introduced by the nearby equipments strictly The creep age of low quality TV can lead to the damage of other equipments 2 5 3 Audio signal input Audio port is BNC connection The input impedance is high so the tone arm must be active The audio signal line should be firm and away from the electro magnetic Interference and connected credible which avoid false and joint welding and oxidation The 17 high voltage current should be avoided especially 2 5 4 Audio signal output Commonly the output par
48. serial port setup and alternate patrol setup 4 4 1 General setup system time Set the system data and time data format Choose the data format YMD MDY DMY list separator Choose list separator of the data format time format Choose time format 24 hour or 12 hour AA Ienu gt Alarm gt Alarm Input Alarm In 1 Enable m h Type Normal Open Period Set Interval Alarm Output Delay Record Channel Tour PTZ Activation Delay 10 Sec show Message send Email Buzzer Advanced Save Cancel lenu gt System gt General System Time 2000 12 03 04 05 30 Date Format YYYY MM DD DST Date Separator Time For at 24 HOUR i Language ENGLISH HDD Full Overwrite DVR No 0 Video Standard PAL Auto Logout 0 Cancel language English or Chinese hard disk full Choose stop Stop recording when the hard disk is full Choose cover Cover the earliest recording files and continue recording Main Menu gt System gt General gt DST when the hard disk is full Enable Day of Week pate number Only when the address button in the remote controller and the corresponding Sat 01 01 01 01 ee ae End E 01 01 01 01 DVR number is matched the remote operation is valid 5 video format PAL or NTSC latency time Set the latency time in 0 60 0 means no latency time summer time Choose the summer time option and pop the dialog box as followed mi wlenu gt System gt Encode 4 4 2 Encode se
49. setup alarm setup network setup network service preview playback Resume default serial port setup user management Hard disk Display hard disk capability and recording time information System Code stream Display code stream information statistics Log information Clear all log information according to the log video and time Edition information Display edition information Shut down Co Logout shut down or reboot 4 2 Recording function information 4 2 1 Recording Config Set the recording parameters in the surveillance channel The system is set 24 hours consecutive recording in the first startup You can enter main menu gt recording function gt recording setup to set Note There is at least one read write hard disk refer to chapter 4 5 1 39 MIURA A Alenu gt Record gt Record Config Channel 1 Redundancy Length 60 min PreRecord 5 Sec Record Mode Schedule Manual slop Week Sun Regular Detect Alarm Period 1 00 00 00 Penod 2 00 00 00 Period 3 00 00 1 00 Period 4 00 00 00 Advanced Save Cancel Picture 4 1 recording setup channel Choose the corresponding channel number to set the channel Choose the all option to set the entire channels redundancy Choose the redundancy function option to implement the file double backup function Double backup is writing the video files in two hard disks When you do the double backup make sure that there are two hard disks installed
50. t System gt Netserice gt NTP Enable Server IP 123 GMT 08 00 Update Penod 10 Port Time Zone Service gt EMAIL Enable es SMTP Server Your SMTP Server Port 20 Need SSL User Name Password sender Receiver Title Alarm Message Cancel alarm information and the photos to appointed address SMTP server Email server address It could be an IP address or domain name Domain name can be translated only it is the correct DNS configuration Port Email server port number SSL Decide whether using Secure Socket Layer protocol to login User Apply the email server user name Password Input the password corresponding to the user Sender Set the email sender address Receiver Send the email to appointed receivers when the alarm is turned on You can set three receivers at most Theme You can set as you wish IP purview setup 1 When choosing the white list only the listed IP address can connect the DVR The 64 IP addressed are supportive in the list When choosing the black list the listed IP address cannot connect the DVR The 64 IP addressed are supportive in the list You can delete the set IP address by Y in the options Note When the same IP address 1s in the white and black list at the same time the black list precedence 1s higher 50 Main Menu gt System gt NetService gt DDNS enu gt System gt NetService gt IP FILTER Enable Restricted Type Blacklist 0 i Q 0 O Banned IP
51. the DVR is damaged 3 System cannot detect hard disk Possible reasons are as followed 1 The hard disk power supply line is not connected 2 The cables of the hard disk are damaged 3 The hard disk is damaged 4 The SATA port of main board is damaged 4 There are no video outputs in single channel multiple channels and all channels Possible reasons are as followed 1 The program is not matched Please update the program 2 The image brightness is all 0 Please resume the default setup 3 There is no video input signal or the signal is too weak 4 The channel protection or the screen protection 1s set 5 The hardware of the DVR is damaged 5 Real time image problems such as the image color or the brightness distortion Possible reasons are as followed l 2 3 When using the BNC output the option between the N mode or PAL mode is wrong and the image becomes black and white The DVR is not matched the monitor impedance The video transmission distance is too far or the loss of the video transmission line is too large 62 4 The color and brightness setting of the DVR is wrong 6 I cannot find the video files in local playback mode Possible reasons are as followed 1 The data line of the hard disk is damaged 2 The hard disk is damaged 3 Update the different program with the origin program files 4 The video files to look up are covered 5 The recording is not on IE The local video is not clear Possible reasons
52. the desktop shortcut menu or enter main menu logout Quit the menu Offer password next entrance shut down Quit the system Turn off the power supply pn When press the shut down button there is schedule hint After three seconds the a system is shut down Cancel midway is of no effect Shutdown Reboot reboot Quit the system Reboot up the system Cancel 3 5 9 Window switch Preview in single window four windows eight windows nine windows according to the choice 36 4 Main menu 4 1 Main menu navigation Main menu Sub menu Function Setup Set the recording configuration recording type recording time section Recording Playback Set recording look up recording play video file storage Detect or format backup equipment back the selective files Motion Set motion detect alarm channel sensitivity area linkage parameters defending time section alarm output screen hint recording PTZ patrol Detection Video Set camera mask alarm channel sensitivity linkage parameters defending time section alarm output screen hint recording PTZ Shelter patrol Alarm Video Set video loss alarm channel linkage parameters defending time section alarm output screen hint recording PTZ patrol Loss Alarm Set alarm input channel equipment type linkage parameters defending time section alarm output screen hint recording PTZ Input patrol Alarm output Set alarm mode configuration manual shut down
53. torage time is not enough Possible reasons are as followed l 2 3 Front vidicon quality is bad The lens is too dirty The vidicon is in backlighting installation The hard disk capability is not enough The hard disk is damaged 22 The downloading files cannot play Possible reasons are as followed 1 There is no media player 2 There is no DX8 1 software or higher edition 3 There is no DivX503Bundle exe file to play AVI video files 4 The DivX503Bundle exe and ffdshow 2004 1012 Exe files must be installed in the windows xp system 235 I cannot remember the advanced code or network code in the local menu operation Please contact the local service or call the HQ service We will offer the service according the machine type and the program edition 5 2 Maintenance Please brush printed circuit boards connectors fans and machine box and so on regularly Please keep the grounding well done to prevent the video or audio signal interfered and the DVR from static or inductive electricity Do not pull out the video signal line or RS 232 port or RS 485 port with the power on Do not use the TV in the local video output port VOUT of DVR It will damage the video output circuit easily 68 5 Do not turn off the switch directly Please use the turn off function in the menu or press the turn off button in the panel 3 seconds or longer to protect the hard disk 6 Please keep the DVR away from heat resource 7 Please keep
54. tup Channel 4 Combine Encode iE Compression H 264 Mode MuliReplay Set the video audio code parameter video file network surveillance and so on Resolution CIF 352x288 CIF 352 lt 283 Frame Rate FPS 25 25 Bit Rate Type VBR VBR channel Choose the channel number Quality Good Good code format Standard H 264 la me Frame Interval J resolution Resolution type CIF QCIF Video Audio frame rate P 1 frame s 25 frame s code stream control You can choose limited code stream or variable code stream When you choose the variable code stream there are six image quality options Advanced Save Cancel 46 code stream value Set the code stream value to modify the image quality The larger code stream value Channel the better image quality Compression Reference range CIF 384 1500kbps QCIF 64 512kbps Resolution video audio When the icons are all in reverse displayed the video file is video and audio multiplex M ETs ate FPS D1 704x576 stream Bit Rate Type CIF S5 88 QCIF 176x144 coding of combination 1 turn on coding combination It can achieve multi channel recording and remote Quality 1000 real time monitoring with ADSL Internet Bit Rate K b S Bit Rate Kb S Frame Interval 1000 1500 deo Audi Video Audio CIF 400 600 QCIF 192 384 z lenu gt S ystem gt NetWork Net Card Wire Netcard DHCP Enable IP Address 192 168 1 10 4 4 3 Network setup Subnet Mask 255 255
Download Pdf Manuals
Related Search