Ultra & Ultra Multishot Rifle Instructions
Contents
1. BSA Guns UK Ltd Unauthorised sale distribution copying or reproduction of part or all of this material is not permitted without prior arrangement Issue 4 September 102. a red spot will appear on the magazine rotor when the probe is withdrawn push the probe forward and fire the last shot then remove and reload the magazine Note The magazine is factory filled with lubricating grease Take care to avoid contamination with dirt or grit and always carry magazines in a sealed plastic bag Do not take the magazines to pieces or remove this grease 2 Care and Maintenance After use check that your rifle is unloaded and wipe the metal and woodwork surfaces with a lightly oiled cloth Pay special attention to the metal finishes as these are not fully rustproof and are vulnerable to damp and particularly perspiration If your rife has become damp make sure it is completely dry before you put it away If the rifle has been unused for some time the bolt may not release on its own when the probe release catch is depressed this is because the bolt probe O ring is gripping the barrel If this happens depress the catch and gently ease the probe back Once free put a tiny smear of Molycote grease on the O ring and work it back and forth a few times Never use oils containing silicone as they can cause damage to metal surfaces Application of oil and grease except as directed by the manufacturer can often do more harm than good Your rifle has been designed and manufactured for optimum performance Tampering with the components or unauthorised modifications and alterations may make the rifle u
3. Ultra amp Ultra Multishot Rifle Instructions IMPORTANT Please read these instructions and view the CD ROM before first using your rifle i i BSA NUMBER OF SHOTS Approx Probe release catch GUNS Carbine Fill Pressure 177 12 ft Ibs 35 shots 232 bar 22 12 ft Ibs 40 shots 200 bar www bsaguns co uk 177 FAC Not available 22 FAC 18 ft Ibs 30 shots 232 bar Loading probe Safety catch Two stage Gun Safety Make sure you know the laws relating to airguns and abide by them When you pick up any gun always check that it is not loaded Never point a gun at anyone or anything that is not a legitimate target Never leave your rifle unattended even if it s unloaded Gun safety is a state of mind never rely on a safety catch After use put your rifle away safely unloaded and out of reach of children Store your pellets separately Always ensure it is safe to shoot and be certain of your target before you squeeze the trigger Make sure there is a safe backstop behind your target to catch your pellet in case you miss Beware of ricochets do not shoot at water or other smooth surfaces that may deflect the pellet in a different direction Always unload your gun when crossing obstacles taking it indoors or into a car When carrying your rifle be sure the muzzle is always pointing in a safe direction in case you should stumble Never shoot on land without written permission f
4. al damage to air cylinders or filling tanks e g dents rust etc and their fittings and valves must require the return of the item s to the manufacturer or their appointed agent for inspection Any modification or service to the product must only be carried out by the manufacturer or their appointed agent On no account should owners attempt to work on or modify guns Do not exceed the manufacturers maximum fill pressure for the gun Because of the high pressures involved the air reservoir should be checked periodically by the factory or an appointed agent of the company BSA recommend a visual inspected every 3 years and pressure tested every 10 years When storing your gun avoid excessive heat cold or humidity Filling the rifle with air The maximum filling pressure for the Ultra and Ultra Multishot are shown in the table above Do not over charge the rifle as this may be dangerous Doing so will reduce the power and can damage the rifle A filling adaptor is supplied with each rifle this has a restrictor screw fitted which must be screwed tightly in place when using an air tank to fill the gun or the rifle could be damaged If using a hand pump the restrictor screw should be loosened or removed using the Allen key provided Before filling always ensure the gun is unloaded and the safety catch is on Unscrew the end cap from the front of the air reservoir If the air reservoir is empty cock the rifle Insert the f
5. illing adaptor into the filling port and push it home Make sure the bleed screw on the charging unit is closed and then open the air bottle valve slowly Slowly fill the gun to the maximum recommended charge pressure and close the valve Allow a few minutes for the pressure to settle and then if needed top up the pressure in the gun and close the valve again Quickly open the air bleed valve on the charging unit to allow the air in the hose to escape Pull the filling adaptor from the filling port and replace the end cap Remember that your rifle may be cocked if it is you should de cock it immediately for safety reasons To de cock your rifle push the cocking knob in and hold firmly pull trigger and slowly release the knob until it is back in the rest position Regularly check the condition of the filling probe O rings and apply a little Molycote 111 grease Only use this grease on the O rings as automotive mineral oils and grease can cause an explosion if used with high pressure air Loading the single shot Ultra Make sure the safety catch is in the rear safe position Push down the probe release catch on the right hand side of the action Place pellet in loading port Push probe forward until the release catch pops up and holds the probe in position To cock the rifle press cocking knob located under the reservoir till you hear a click as the trigger engages The Ultra has been desig
6. ned so that it can be cocked easily at the moment you choose to shoot with a minimum of movement that might alert your quarry If you want to de cock your rifle push the cocking knob in and hold firmly pull trigger and slowly release the knob until it is back in the rest position Loading the Ultra Multishot Apply the safety catch and push the magazine retaining catch forward Push down the probe release catch on the right hand side of the action then remove the magazine from the gun Hold the magazine between finger and thumb with the cover plate screw uppermost Push a pellet nose first into the first magazine chamber and press down until the pellet skirt is under the cover plate see Fig 1 Rotate the central body of the magazine anti clockwise until the next vacant position lines up with the hole in the cover plate Insert another pellet and repeat the procedure until the magazine is full see Fig 2 The red dot on the magazine body will be at the top when all ten pellets are loaded At any stage during loading the magazine body can be moved back one position by pressing the escapement mechanism lever see Fig 3 Replace the magazine in the rifle see Fig 4 and push the retaining catch back to lock the magazine in place push the pellet probe forward until the release catch pops up and take off the safety catch The rifle is now ready to fire When the tenth and final pellet has been indexed into position
7. nsafe to use and will invalidate the warranty All air rifles require periodic maintenance and inspection so even if everything seems to be in good working order have your air rifle Trigger Adjustment Always ensure that your gun is not cocked or loaded before adjusting the trigger In the interests of safety take care not to over lighten the trigger weight The trigger is set at the factory but some aspects can be adjusted to suit individual preferences 1 Trigger pull This screw adjusts the weight of second stage trigger pull to increase the weight of pull turn the screw clockwise and anti clockwise to reduce the weight of pull 2 Sear engagement screw This screw determines the length of the second stage release Should you wish to adjust the length of the second stage release slacken off the locknut and adjust the screw the desired amount Turning the screw clockwise reduces the second stage release turning it anti clockwise increases the second stage release CAUTION GREAT CARE SHOULD BE TAKEN IN THE ADJUSTMENT OF THIS SCREW ANY EXCESSIVE CLOCKWISE TURN COULD RENDER THE GUN IN A CONDITION IN WHICH IT COULD FIRE ACCIDENTALLY IF IN ANY DOUBT CONSULT A QUALIFIED GUNSMITH 3 First stage trigger adjustment this is factory preset and must not be adjusted checked periodically by a competent gunsmith You should always have the power of your air rifle re checked following any maintenance or repair work as any repairs o
8. r adjustments could affect the power It is your legal responsibility to make sure the air rifle remains below the legal limit which in the UK is 12 ft lb The rifles air reservoir must always be kept in good condition If any damage occurs for example denting exposure to extreme temperatures or rust the gun should be inspected by the manufacturer or their appointed agent The internal bore of the air cylinder must be inspected for corrosion periodically which should not exceed 5 year intervals Diagrams and parts lists are available on our website at www bsaguns co uk 2 Year Warranty All new BSA rifles carry a 2 year warranty against faulty parts and labour this applies to new rifles only and is not transferable proof of purchase is required Excluded from this warranty are failure due to misuse or abuse the fitting of non standard parts and fair ware and tear including damage to the stock All warranty work must be done by BSA or an authorised agent of the company and should the rifle be collected or returned under warranty BSA or their authorised agent reserve the right to charge for postage and or inspection BSA GUNS UK Ltd Armoury Road Birmingham B11 2PP England Tel 0121 772 8543 Fax 0121 773 0845 BSA Guns UK Ltd reserve the right to alter the designs or any constructional details of any product at any time without prior notice For the most up to date information on BSA products view our website at www bsaguns co uk
9. rom the owner Technical Information All BSA airguns are made to the highest standards at our factory in Birmingham BSA barrels are cold hammer forged and crowned for optimum accuracy Before leaving the factory every airgun is tested on special purpose machinery to verify velocity and pellet grouping UK law dictates that air rifles should not be capable of above 12 ft lb of muzzle energy all BSA models conform to this requirement Export models are supplied to conform to the laws in the destination country Using Compressed Air CAUTION Only dry breathing quality air should be used in guns Never fill any gun with oxygen or any other gas Doing so could cause a serious explosion Never try to fill your gun with air when the rifle is in a partially assembled State The Ultra can be filled from an air tank or using a hand pump Whichever equipment is used a pressure gauge and supply hose bleed device must be included and the manufacturers instructions must always be followed Telescopic Sights The BSA Ultra has a full length integral 10 8mm dovetailed scope rail designed to accept standard scope mounts and night vision equipment Refer to the scope manufacturer s instructions on fitting and adjusting adjustable trigger Filling valve cover Cocking knob Magazine retaining catch opposite side Safety Warning Use only dry breathing air In the interest of safety any physic
Download Pdf Manuals
Related Search