Prosecutor Digital Manual Protex
Contents
1. PROSECUTOR DIGITAL TRUNK MOUNTED UNIT Operation Manual Prosecutor of Texas LLC Humble Texas www policevideo com March 2005 IMPORTANT To keep your warranty valid it is important to consult with a Prosecutor of Texas technician before installing the Prosecutor Digital System as well as reading filling out and returning the following form Failure to do so will VOID the Prosecutor Digital warranty Tel 281 446 9010 Fax 281 446 9013 Email prosecutoroftexas policevideo com Website www policevideo com 2 A completed copy of this Installation Work Sheet must be mailed to the following address to activate warranty coverage Failure to submit this document within 10 days from installation will void the product warranty Prosecutor of Texas Warranty Registration 1906 Treble Drive Humble TX 7338 Prosecutor After Installation Test Worksheet Sales Order Serial Wireless frequency I Pre Test Verification PASS k Inspect vehicle and record any abnormalities before installation begins Notes Install Prosecutor Digital System per installation instructions in the manual Verify connection of DB25M DB25M cable between control head and vault Verify connection of camera cable to control head Verify connection of interface tester between control lead and interfaces Verify connection of windshield LED cable assembly Verify connection of the powe2. Camera 1 0 Lux 8X Digital Zoom Easy to use overhead controls Programmable Industrial Environmentally Grade DVR with Removable 40 GB HD Environmentally Controlled Vault and DVR Record activation by body transmitter control Record Over Protection Radar Gun Laser GPS Alcohol Tester Interface included as Standard Equipment Covert Mode Outside Vehicle Viewable Record amp Audio On Indicators Backseat Microphone Standard Equipment On screen Time and Date Stamp with Title Manual and Automatic Operation Camera Position can easily be adjusted via Windshield Bracket Backseat Camera available Camera Model AVE 8002 Hi Resolution more than 450 TV Lines Solid State Optics Lens X16 Zoom f23 9 68mm Min 1 0 Lux White Balance Auto Preset Manual Digital Zoom X8 Operating Temp 0 deg C 40 deg C Power 12V 2V AW Dimension 2 65 W X 2 56 H X 4 4 D Regulation FCC Class A Focus Auto Near Manual Wide Back Light Compensation Control Head 4 inch color TFT LCD monitor Durable membrane switch with backlight Both LCD monitor and switch backlight can be turned off for quiet operation Audio volume control and LCD brightness control LED output indicating both audio and recording are functional Constructed with 18 gauge steel Dimension 11x6 25x3 inches 27 94cm x 15 88cmx7 62cm Weight 3 7lbs 1 68kg Figure 1 Prosecutor System F
3. Microphone Figure 7 VHF Audio Transmitter amp Receiver and Charging Base 900MHz Spread Spectrum Transmitter and Receiver optional Compliant with FCC Title 47 Part 15 Subpart C Digitally Coded over 9000 Combinations automaticallymatches code when transmitter is place in the reviever base Multiple units can be used with NO interference 40 available channels 1000 ft Range with internal antenna Full duplex two way voice communication optional Remote Activation of Transmitter when VCR in Record Mode 6 8 Hours of Talk Time per charge Standby two days Rechargeable Battery Charges while in base Convenient Mounted Charging and Receiver Base up front next to officer Built in Microphone or External Lapel Microphone Operating Temperature 10 110 degrees F Transmitter Dimensions 63 7mm x 32mm x 111 5mm WxDxH Transmitter Weight 156g Figure 8 900MHz Spread Spectrum Transmitter amp Receiver optional and Charing Base Prosecutor of Texas LLC Humble Texas 10 Instructions in Brief Control Head 1 AUDIO ON The Audio Light will be ON when the wire less microphone is turned ON 5 7 6 8 2 LOW TAPE 9 12 The Low Tape Light is the warning that the hard diskis 95 10 11 used 13 15 14 3 OUT TAPE 4 RECORD The Record light indicates that the DVR is in Recording mode 5 ZOOM IN 16 Press this button to Zoom In the image ofthe front camera 6 ZOOM OUT Press this b
4. Operations POWER UP THE SYSTEM Complete the installation of the In Trunk System as describe in the previous section Turn On the volume monitor control switch If the light on the Power does not turn on check all the system connections If Light on the POWER is on then you can turn on the system using one of the following methods 1 From Control Head Press the POWER button on the control head and it will turn ON the system 2 Microphone Activation Place the Microphone Transmitter power switch in the ON position the green LED will come on the Microphone Transmitter and the system will automatically turn on 3 Light Bar Activation If you have connected the white wire to the light bar then activation of the light bar will automatically power up the system and go immediately into the RECORD mode If the system is already powered up then either of the following actions will trigger the system to RECORD 1 Siren Activation If you have connected the blue and black wires to the siren the system will automatically go into the RECORD mode when the siren is activated if the system is previously power up 2 Brakes and or Turn Signal Activation If you have connected either or both the yellow wire to the Turn Signals and the red wire to the Brakes then upon activation of these functions will display the message in the video They are programmable to automatically activate the system to RECORD but the default progra
5. characters don t type in a file extension the file extension is automatically inserted by the program Click Save and another dialog box appears Copy Raw Video to Windows Hard Disk Here you see your chosen file name and copy destination plus other info about the hard disks and estimated time for the copy process The important thing to notice here is Free hard disk space compared to MB of video If Free hard disk space is less than MB of video the copy process can NOT be done You have to choose another hard disk if you have more than one hard disk in the PC or network hard disks to save the video on through clicking Save As or delete files on your existing hard disk and try again If you have enough free space click Copy Video and the copying process starts you will see Copying and a progress bar All your recorded video is now being saved to your windows hard disk Wait until the program alerts you with a message box and a sound that the copying is finished Dialog box Copy Raw Video to Windows Hard Disk is automatically closed when you click OK on the message box 4 You are now back to the three menu items Click Tools again and now choose ADV gt AVI and you see the dialog box Video File Conversion ADV AVI Click Change From and you see an Open dialog box You should see your saved video files in a numbered sequence with a file extension adv if not browse to the destination wher
6. is connected to the vault The standard configuration is with backseat microphone only Therefore you must connect this cable to the vault or when you select the backseat switch you will not see video from the front camera When selected you enable the back seat microphone but are still recording the wireless microphone Make sure the volume control on the control head is turned down or you will hear feedback when selecting this option COMMON QUESTIONS 1 The unit operates erratically Check the Program Lock in the rear of the vault and make sure the program lock is ON 2 get no picture on the monitor Make sure the back seat microphone connector is installed on the vault The reason for this is that if no back seat camera is installed the video has to be looped through this connector via a jumper If the connector is not installed then no video will pass from the front camera to the monitor 3 The car battery is being drained The Prosecutor System pulls 140mA from the car battery constantly Therefore in about 1 2 weeks this will drain the battery if the vehicle is not used If the vehicle is not being used for extended periods of time disconnect the power to the battery via the yellow fuse holder on the power cable You might also install a cut off switch on the power switch for convenience Verify the ignition wire is connected properly The ignition must be connected to the switched 12VDC side of the ignition The Prosecutor Syst
7. passenger side of the car Remove or loosen the lower half of the trim on the door post between the front and the rear door enough to get cables under Camera Mount Remove the mount foot from the camera mount If you are using a windshield mounted camera mount the foot to the window by following the directions on the included adhesive package making sure to follow the instructions exactly If you are not mounting the camera to the windshield follow the directions on the adhesive package and mount the foot in the desired location paying special attention not to obstruct air bag deployment Allow adhesive to set until the end of the installation before mounting the camera LED The LED wire connection will hook into the rear of the control head Place the LED cable somewhere on the front dashboard making the LED end visible outside the front windshield of the vehicle On the driver s side of the windshield is recommended This way the cable can be placed up the side panel and run across the edge of the headliner to the rear connection of the control head Trunk Unit Mount When installing in a Ford Crown Victoria Prosecutor Digital recommends mounting the Vault inside the trunk on the lower left driver s side adjacent to the air suspension switch See diagram 1 2 Dia hole Measure 5 3 4 across from the hole Measure 3 7 8 out from the edge use 17 64 metal drill bit to drill a hole Prosecutor of Te
8. this setting be used See the following table for estimated recording duration versus recording quality in real time FRAME 60P NTSC or FRAME 50P PAL Recording Duration in Real Time frame 60 P NTSC 50P PAL using 40MB Hard Disk NTSC FORMAT Quality Duration High 16 Hours 47Minutes Normal 21 Hours 33Minutes Basic 37 Hours 38Minutes PAL FORMAT Quality Duration High 15 Hours 56Minutes Normal 20 Hours 45Minutes Basic 36 Hours 04Minutes Prosecutor of Texas LLC Humble Texas 28 Programming Auto Record The default setting is OFF If you turn on this feature the DVR will begin recording as soon as the DVR is powered up Auto Reverse The default setting is OFF If you turn on this feature when the hard disk is full the DVR will automatically return to the beginning of the disk and record over the previously recorded information It is recommended that the OFF setting be used Multiplexer Not used Clear HD The default setting is OFF Selecting ON will return the DVR to recording from the beginning of the Hard Disk The value then is automatically reset to OFF until selecting ON again HARD DISK USAGE When in the Record mode the percent hard disk usage will be displayed in the top left hand corner of the screen Just below this the Record mode is indicated To the right of this the current recording rate is indicated PROSECUTOR Figure 16 Mornito
9. 0 40 C 50 105 F Recording Time Over 20 hours recording in Real Time using the Normal Quality Mode with Audio Video Recording 60 fps at 720 x 480 pixels video inputs NTSC 50 fps at 720 x 576 pixels video inputs PAL On Screen Display Time Date Title 5 Status Indicators Hard Disk Used Interface Readout and Programming Menu when selected RS 232 interface to most Radar Laser GPS Alcohol Tester measuring devices Recording can be started with Audio Transmitter Siren Signal or Lights Signal Recording can be activated with Overhead Controls Compact Disc containing Remote Viewer Software for PC User s Manual Figure 6 DVR in Vault Prosecutor of Texas LLC Humble Texas 9 Feature amp Specifications VHF Audio Transmitter and Receiver Compliant with FCC Part 74 and Industry Canada RSS 123 rules Transmitter dimension 3 6 X 2 5 X 1 9cmx6 5cmx2 5cm Weight 2 82 or 0 08kg High quality Wireless Microphone System with Ultra sonic Tone Coded Squelch Frequencies in VHF range more than 50 Working range 300ft Maximum 1000ft Battery life 8 to 10 hour with 2 AA NiMH Rechargable Batteries included Comes with a Dual Station Battery Charger Wind Screen and Tie clip Holster Forward Cantered optional Patent Leather or Basket Weave Audio Receiver mounted inside the Vault Shielded Antenna mounted on trunk or 1 2 wave whip design Built in Microphone or External Lapel
10. ARD DRIVE When the hard drive is 95 full a LOW TAPE light will illuminate on the control head When the hard drive is 100 full the control head will begin beeping and the OUT TAPE light will illuminate on the control head First ensure that the recording has been terminated Unlock the mobile rack using the key Lift the handle out by 90 degrees and gently pull the rack out of the drive bay AUTO POWER DOWN The Prosecutor System has an automatic power down feature in case the user turns off and exits the vehicle and does not manually power down the system The Prosecutor System will automatically turn off after one hour if no manual buttons or any automatic function is initiated within in this time frame This will allow the system to be used with the vehicle off if the user desires but if the user forgets to turn it off it will automatically shutdown to conserve battery power after one hour CAMERA The video camera mounted in the windshield can be manually moved at any time to gain a better view of the target scene Upon Zooming in the camera to get a license plate view or other reason the camera will autofocus for 1 second and then go to the focus locked mode This allows a constant in focus image of the target view even if things move in the view However the user can manually focus the camera with the Near and Far buttons on the control head When the camera is zoomed out again the camera will again auto focus for one second and th
11. D LOCATION ID ENABLE OFF DATE TIME OFF ALARMREC 1 MIN EXIT Prosecutor of Texas LLC Humble Texas 27 Programming Note that only the Set Menu item on this menu is to be used The other menu items for the DVR are not used or are already included using the functionality in the Prosecutor Digital System Select the Set Menu item The following sub menu will appear YEAR MONTH DAY TIME EXIT SET MENU DATE YEAR MONTH DAY TIME RECORD MODE FRAME REC FPS 60P REC QUALITY NORMAL AUTO RECORD OFF AUTO REVERSE OFF MULTIPLEXER 1 CH 1P CLEAR HD OFF OFF ON Exit Set Menu Select this item to exit out of the menu when finished programming the DVR settings Date Not used The date and time are programmed in the Prosecutor Digital System Record Mode and Rec FPS Changing the RECORD MODE and RECORD FPS will affect the recording quality and available recording duration The default setting for RECORD MODE is FRAME The default setting for REC FPS is 60P for NTSC or 50P for PAL Using the combination of these settings provides real time recording It is recommended that these settings be used See the following table for estimated recording duration versus recording quality in using these settings real time Record Quality Changing the RECORD QUALITY will affect the available recording duration The default setting is NORMAL It is recommended that
12. S AND EXCLUDES ANY IMPLIED WARRANTY AS TO CORRECTNESS OF ANY STANDARDS OR RATINGS WHICH ARE INCONSISTENT WITH THE AFORESTATED FACTS AND RESTRICTIONS c WARRANTIES EXCLUDED SELLER EXPRESSLY DISCLAIMS AND EXCLUDES ANY EXPRESS OR IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEEDS OR IS INCONSISTENT WITH THE WARRANTY HEREIN EXPRESSLY SET FORTH d Equipment manufactured or supplied by others manufacturers other than Seller but furnished by Seller hereunder carries the same warranty to Buyer as Seller receives from the other manufacturer e NOTWITHSTANDING ANY PROVISION TO THE CONTRARY should Buyer specify that Seller supply a particular manufacturer s product which is not the brand standardly supplied by Seller Buyer shall look only to the other manufacturer s warranty and Seller shall not warrant such item Buyer shall obtain only the warranty which comes with such other manufacturer s product f EXCLUSIONS Seller s warranty does not cover the following 1 in transit damage claims improper handling by carrier or post office NOTE only the consignee of the shipment can file a claim with the common Carrier Prosecutor of Texas LLC Humble Texas 37 Warranty Information 2 damages caused by incorrect use modification carelessness unauthorized Iterations improper storage or unauthorized service installation or repairs 3 damages caused by fire flood lightning collision act
13. a 1200 DVR can be purchased for the purpose of playing back the video on the hard drive Use the controls on the front panel of the DVR to view the video Additional information about use of the DVR for playback is contained in the DVR User s manual included on the compact disc that comes with the Prosecutor Digital System Prosecutor of Texas LLC Humble Texas 34 Prosecutor Software adv2avi_NTSC_audio exe video processing program WinXP only The Setup adv2avi msi file installs adv2avi NTSC audio exe video processing program and the required codec on your WinXP system INSTRUCTIONS Insert the hard disk from the recording unit into the rack mounted in the PC and lock the rack Turn on the PC 1 Run Setup adv2avi msi to install adv2avi_NTSC_audio exe program and codec WinXP only 2 To start up adv2avi NTSC audio exe from the start menu click the start button down to the left on your screen Then click All Programs look for AVE and click on it then click adv2avi and finally click adv2avi NTSC audio exe A window comes up with menu items File Tools and About Click on the Tools menu option and you see three sub options Copy Video 7 ADV gt AVI and Clean Sweep 3 Click Copy Video to invoke a save as dialog box titled Copy Destination Type in the save name you want for your raw video from the recording unit you can use up to 31
14. ate of invoice Seller reserves the right to add to any account outstanding for more than thirty 30 days and Buyer agrees to pay a service charge of 1 1 2 of the principal amount due at the end of each month or the maximum allowable legal interest rate if a lesser amount Prosecutor of Texas LLC Humble Texas 38 Warranty Information 11 Creation of a Lien In the event that the purchase price is not paid when due and credit is extended to the Buyer then in consideration therefor Buyer grants to Seller a security interest in the Product and said security interest shall extend to all parts or accessories now or hereafter attached to the Product and the proceeds therefrom 12 Taxes Prices quoted by Seller do not include any existing or future sales use or similar taxes which are or may be levied upon the sale delivery or service of the Product by federal state or other governmental authorities Such taxes shall be for the account of the Buyer who shall promptly pay the amount thereof to the Seller on or before the time when such tax or taxes are payable by Seller to applicable taxing authority or authorities If the sale is tax exempt Buyer shall provide Seller with a proper tax exemption certificate upon acceptance of order or in any event prior to shipment of Product Should any question as to applicability of such taxes to any sales later arise Buyer shall fully cooperate in resolving such question and pay any such taxes the
15. ction from Normal to Hot 4 Press the F F button and you will return to the selection mode to return to the main menu select Exit and press WARNING DO NOT CHANGE THE CLIMATE SETTING WITHOUT CONSULTING THE FACTORY RECORD SETTINGS Access the sub menu of the Record Setting by placing the arrow next to Record setting and press the F F button The following sub menu will appear ALARM REC DWELL The setting you choose will be the minimum recording time after the Alarm Record Signal goes from high to low or active to inactive The default setting is 30 minutes From the Main Menu select the Record Settings sub menu by moving the cursor to that item and pressing the F F button on the remote control Then select ALARM REC DWELL The cursor will start blinking Press the and buttons to change the settings The available settings are from 0 to 180 minutes in one minute increments Exit all of the menus to activate your programming changes When the DVR begins recording it will display the REC message on screen as well as the percent hard disk usage and recording rate See the DVR Settings section for more information DVR SETTINGS From the Main Menu select the Record Settings sub menu by moving the cursor to that item and pressing the F F button on the remote control Then select DVR Settings The following sub menu for the DVR will appear SET MENU ID I
16. ctor 8 Pin Din 4 Connector for Radar Laser GPS Laptop or Alcohol Meter DB 9 5 Vault Control Connector DB 25 6 5 Amp Circuit Breaker 7 A V Connector 5 Pin Din 8 Program Key Lock 20 CAMERA INPUT Connect the front camera to this connector 21 CONTROL DB 25 connector for control head interfacing with vault 22 INTERFACE Connector for interfacing with siren light bar and ignition 23 LED This LED will turn on when the DVR receives the record and audio signal from the control head This will help the Officer determine the control head record status from outside the vehicle 24 BSEAT You can select the front or rear camera microphone by switching the BSEAT switch 25 A V Connector This connector gives the user access to the audio and video output and can input an additional audio or video signal This is a factory installed option N Figure 12 Description of Vault When the key in the vertical position the Prosecutor System and the IR remote control functions are in the Ready to Record or Playback mode When the key is in the horizontal position the Prosecutor System and IR remote control functions are in the Ready to Program mode Prosecutor of Texas LLC Humble Texas 12 Instructions in Brief IR Remote Control POWER Don t use this button The DVR power is controlled by the internal microprocessor The DVR will automatically power up when 12VDC
17. e 9 Description of Botton Control Head 13 Figure 10 Description of Beside Control Head 13 Figure 11 Description of Rear Panel Control Head 13 Figure 12 Description of Vault 14 Figure 13 IR Rrmote Control 15 Figure 14 Description of Connection 20 Figure 15 Removing Hard Disk w A3 Figure 16 Monitor View J Foreword We thank you for your purchase of the Prosecutor Digital System Trunk Mounted Unit You have purchased a high quality system that will provide you with many years of trouble free service Should you have any question about the system or any problems please call 800 482 9211 or fax 281 446 9013 We service all components of the system in house as well as through our ever growing Dealer Base This guide will provide the user with enough information to operate the Prosecutor Digital System properly and effectively As you read through this guide if you have any questions ideas or sugges tions about the system or the guide itself please feel free to call us at your convenience Thank You Prosecutor of Texas LLC 1906 Treble Drive Humble TX 77338 Tel 281 446 9010 800 482 9211 Fax 281 446 9013 Email prosecutoroftexas policevideo com Website www policevideo com Feature amp Specifications Smallest Trunk VAULT Available 16 X Optical Zoom Low Light Auto Focus
18. e you saved them Click the one you want to convert to avi and click Open Now click Change To and you see a save as dialog box named Conversion Destination Type in any name you want for your avi file and click Save Now click OK and you will see Converting Wait and your raw video is being converted to standard avi format Wait until the program alerts you that the conversion is complete Click OK on the message box saying adv Video file file name XXXX adv conversion SUCCEEDED and then click Close 5 Now double click the saved avi file in Windows Explorer and the video will start playing in your default avi player probably Windows Media Player Repeat step 4 to convert more raw adv video files to avi video files 6 There is one more option under Tools the Clean Sweep utility Clean Sweep erases the video hard disk totally This is not necessary but it s a security measure to delete all video on the hard disk The recording unit does NOT delete the video previously recorded on the hard disk 7 To exit the program click File and then Exit PAL is use same NTSC Disable checkdisk when Window XP startup Click start button and run Type regedit into open and enter goto HKEY LOCAL MACHINE gt SYSTEM Controlset 001 gt Control gt SessionMager Change data in BootExcute by double click on BootExcute and type k before EXP Autocheck autochk k Hardware requirements and
19. em enables the climate control system whenever the ignition is on Therefore if wired incorrectly and the temperature gets too cold or too hot the heater or fan will come on and deplete the battery rapidly 4 No Power to Control Head Check the fuse on the power cable in the yellow case close to the battery Also check the circuit breaker on the rear of the vault If either are blown verify the connection of the power cable to the vault and make sure the detent is correct for if this reversed will blow either or both Verify the Control Cable is tight on both the vault and the control head 5 Low Voltage Verify the installation is directly to the battery terminals and not using an auxillary fuse panel or other location If an old installation check the power connection for might have gotten corroded and needs cleaning Prosecutor of Texas LLC Humble Texas 21 Programming In this section we discuss some of the powerful programming features of the Prosecutor Digital System Before programming the toggle key on the back of the vault must be turned to the horizontal position for Ready to Program mode The Programming mode can only be accessed by using the IR remote control The following table shows the IR remote control button functions used in the Programming mode Things to Note STOP Press and hold the remote control s Stop button for 5 seconds to access the mail menu F F Pressthis button to enter or exi
20. en go to the locked mode COVERT MODE The Prosecutor system can work in the covert mode which means it is still recording and operating but looks like it is switched off On the left side of the control head is the volume monitor on off control To enter the covert mode rotate the volume to the lowest level unit you feel the switch engage All lights to the keypad and the LCD montors will be turned off Warning If you press any button on the control head the beep will be audible Prosecutor of Texas LLC Humble Texas 20 Basic Operations Insert key to lock unlock the Handle for pulling the mobile mobile rack when removing installing the hard drive rack out of the drive bay Figure 15 Removing Hard Disk LED Indicator Cable The external LED cable from the control head has two LEDs The Red LED signifies the DVR is in the Record mode and the green LED signifies the Audio is on and working This is a visual indication from outside the vehicle that the system is recording properly for the user to view conveniently A V Interface The A V Interface connector allows the external audio video input or output on either the control head or vault The vault connector is usually used for the 900Mhz External Wireless audio but can be used for other purposes This option is not standard and needs to be installed at the factory The installed plug is a dummy Back Seat Microphone and Camera The back seat microphone and or camera
21. ertificate contains other terms and conditions which either conflict with or are additional to the provisions of these terms terms which are additional shall be incorporated by reference herein and terms which are in conflict with any provision contained herein shall have no force or effect b PERMISSIBLE VARIATIONS STANDARDS AND TOLERANCES Except in the particulars specified by Buyer and expressly agreed to in writing by Seller all material and equipment shall be produced in accordance with Seller s standard practices All equipment and material including that produced to meet an exact specification shall be subject to tolerances and variations consistent with usages of the trade and within practical and reasonable factory inspection methods Equipment or materials which are rated or certified by independent rating or certifying trade asso ciations or organizations and bear their respective symbols or sales shall signify only that such equipment was produced to meet such standard within the permissible variations and tolerances such equipment or material will meet the safety ratings or capacity requirements to which the symbol or seal applies under laboratory testing procedures specified by said associations or organizations as distinguished from field testing Seller makes no certification as to installed performances of the equipment or material other than as heretofore set forth WITHIN THE AFOREMENTIONED LIMITATIONS SELLER EXPRESSLY DISCLAIM
22. igure 2 Camera Figure 3 Modular Control Head Prosecutor of Texas LLC Humble Texas 8 Feature amp Specifications Constructed with 14 gauge steel lockable and tamper resistant Dimensions 11 5 W X 6 5 H X 16 D 29 21cmx16 51cmx40 64cm Weight 28 82 lbs 13 02 kg Removealbe Vault with bracket mounted in trunk Non reflective black powder coated matte finish Tamper resistant locking door Environmentally Controlled Specialty Radar Laser GPS Alcohol Tester Interface ready Dual Wireless Microphone Capability optional Shielded antenna input Raised Mounting Straps Included Back Seat Microhpone Optional Back Seat Camera Ready Figure 4 Vault Wiring Harness EX Control Cable 25 Conductor shielded with DB 25 connector Power Cable 16 gauge stranded fused to battery 10A Control Cable Power Cable Radar Laser GPS Interface 2 Conductor shielded with DB 9 connector optional Antenna Shielded 50 ohm terminated via RF to chassis of vault Interface 6 Conductor Shielded to Lights Siren Ignition Brakes and Turn Signals Interface Mic Backseat DVR Figure 5 Wiring Harness Industrial Grade Cobra 1200 Digital Video Recorder Compliant with FCC Part 15 Class B and CE rules Double Shock Mounted Hi G Force 40GB IDE Removable 2 5 inch Hard Drive Additional IDE Mobile Rack for insertion of Hard Drive into PC Operating Voltage 12V to 24V DC 3 amp min Operating Temperature 1
23. is applied to the DVR REC Press these two 2 buttons simultaneously to manually start recording PAUSE STILL Press during recording to pause recording Press dur ing the playback to freeze the picture Caution If this button is held for 6 seconds then it will mas ter reset the system and clear all the programming to factory default The DVR Programming will not be reset STOP Press this button to stop running the DVR Alternatively press and hold that button for 3 to 5 seconds to access the programming mode PLAY Press this button to start the playback mode REW Press this button to perform reverse playback when in the Play mode F F Press this button to perform fast forward playback when in the Play mode In Programming mode use this button to access the menu selection TRACKING Us the and buttons to adjust the recording volume level between 0 and 10 It is recommended that the level be set to 10 Use and buttons in the Programming mode to move the cursor upward or downward CMM MACHINE Figure13 IR Remote Control Prosecutor of Texas LLC Humble Texas 13 Installations To properly install the Prosecutor Digital System please read and perform each of the following steps in order Preparation Disconnect the car battery cables Remove the lower half of the rear seat Remove the kick panel and trim strips on front and rear
24. ll also exit the record mode after any programmable dwell time is timed out Prosecutor of Texas LLC Humble Texas 19 Basic Operations Note Inside the battery compartment of the transmitter is a master on off switch If the transmitter is not used for more than two days this should be turned off so as not to deplete the battery INSERT HARD DRIVE With the system either powered on or off insert the mobile rack containing the hard drive into the drive bay opening Once inserted lock the mobile rack using the key and power up the system START RECORDING Ensure that the toggle key on the back of the vault is in the vertical position for Ready to Record Playback mode You can start recording by either pressing the control head s RECORD button or by pressing the REC buttons on the IR remote control When recording the RECORD indicator will illuminate on the control head and the REC message will display on screen You can also program the DVR to power up in the Record mode Us the and buttons to adjust the recording volume level between 0 and 10 It is recommended that the level be set to 10 Note See the Programming DVR Settings section for more details STOP RECORDING Press the STOP button on the control head or press the STOP button on the IR remote control to terminate the recording The recording can also be terminated by pressing the PAUSE STOP button on the DVR REMOVEH
25. me Date Input current time amp date Interface Selection Interface Enabled i OFF From the Main Menu Record Settings Menu check the default setting Alarm Rec Dwell 30 min From the Main Menu Record Settings DVR Settings SET MENU check the default settings RECORD MODE FRAME REC FPS 60P REC QUALITY NORMAL AUTO RECORD OFF AUTO REVERSE OFF CLEAR HD OFF 5 Modify setup per customer request Notes IV Power Down 1 Press POWER button on the control head to power down the system 2 Make sure POWER button on the control head is the only button that stays lighted V Appearance 1 Check System for prominent visual damage or scratch 2 Check for proper serial numbers 3 Clean up LCD display as needed INSTALLED BY DATE TESTEDBY DATE CUSTOMER CONFIRMED DATE Please Read M CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN A CAUTION TO PERVENT ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFERSERVICING TO QUALIFIED PERSONNEL TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DANGEROUS HIGH VOLTAGE IS PRESENT INSIDE THE ENCLOSURE DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERONAL ONLY NOTE This equipment has been tested and found to comply with the limits for class A digital device pursuant of part 15 of the FCC Rules These limits are designed reason able protection against harmful interference when
26. microphone to the desired location at the rear of the vehicle For mounting see the instruc tions enclosed with the rear camera Interface Cable This is the gray cable with a 6 pin connector on one end and the orange black blue and white wires on the other end Route the interface cable from the control head to the fuse box Start at the center of the headliner to the driver side of the central cable leaving about 4 inches of the 4 pin plug end of the cable hanging down Route across under edge of the headliner down the door to the fuse box Attach the orange wire to switched 12V Extend white wire to the light box wire that gets 12V when the overhead lights are activated Attach the blue wire and the black wire to the siren If the siren is AC instead of DC you can use the same connections Attach the green wire to the ground Note For AC The Blue wire is Hot the Black wire is Neutral DB 25 Control Cable This is the 25 foot DB 25 male to DB 25 male cable Connect one side of the cable to the control head and other to the vault Route the cable through the backseat to the front of the car up the front door post along the front edge of the headliner to the middle of car Leave about 4 inches hanging from the headliner Pictures of cables being routed located on next page with power cable routing Prosecutor of Texas LLC Humble Texas 16 Installations Power Cable This is the gray cable with red and black wires on
27. mming is this function is OFF 3 Back Seat Microphone Camera The VHF audio receiver powers up automatically when The VHF audio receiver powers up automatically when the power cable connects to the battery and the control cable connects with the control head Note The wireless receiver consumes 140 mA of current We recommend disconnection of the Control cable from the Control head if the vehicle is not used for more than a week Optional 900 MHz Wireless Microphone The 900 MHz audio receiver powers up automatically when the power cable connects to the battery See precautions above Since the receiver is also the charger base it can pull up to 330ma while the transmitter is charging Upon complete charge the battery draw will drop back to 140mA nominal This transmitter has two methods of activation 1 The transmitter in the OFF position is set for automatic activation Whenever the DVR goes into the RECORD mode the transmitter is automatically turned on along with a faint beep of the transmitter for the duration of the record ing It can not be turned off by the user Upon exit of the record mode the transmiter will automatically be turned off again 2 With the Microphone Transmitter power switch in the ON position the green LED on the base station will come on along with a faint beep of the transmitter and the system will automatically turn on and record audio and video When this switch is turned off the unit wi
28. n determined to be owing 13 Waiver Seller s failure at any time to require performance by Buyer of any provision of these terms and conditions shall not be deemed a waiver of future compliance therewith and shall not affect the right of the Seller to require compliance therewith at any time thereafter 14 Indemnity Buyer agrees to save and indemnify and keep harmless Seller against all liability claims demands or judgment for damages arising from accidents to persons or property occasioned by Buyer his agents or employees and will defend any and all suits and will reimburse and indemnify Seller for all expenditures or expenses including court costs and counsel fees made or incurred by Seller by reason of such accident 15 Unauthorized Representations Buyer agrees that it is not Sellers agent assign or authorized dealer All performance claims additional warranty periods or other representations made to third party purchasers shall not be binding on Seller and shall be the sole responsibility of the Buyer Buyer shall indemnify Seller for any and all damages incurred by Seller due to any unautho rized representations 16 Time For Claims ANY CLAIM S BY BUYER ARISING FROM THE PERFORMANCE OR NONPERFORMANCE BY SELLER MUST BE BROUGHT WITHIN ONE 1 YEAR FROM THE DATE SUCH CLAIM AROSE 17 Applicable Law All sales shall be governed and construed under the laws of the State of Texas Should any part of this agreement f
29. n the screen The DVR will not accept a tape if the input voltage is less than 9V Follow the steps below to turn the voltage display on or off 1 Under the main menu place the cursor in front of Display Setting and press the F F button 2 Now place the cursor in front of Input Voltage and press the F F button 3 Press the or button to select ON or OFF 4 Exit all of the menus to activate your selection Temperature A built in temperature sensor tracks the internal temperature of the DVR and Vault You can view the internal temperature by enabling the temperature display in the display setting menu If the temperature goes higher than 90 F 82 C then the fan is turned on If the temperature goes lower than 40 F 4 C then the Heater is turned on If the temperature goes lower than 32 F 0 C then the DVR will be turned off The display can either be in Fahrenheit F or Celcius C Follow the steps to enable the temperature display on the screen 1 Under the main menu place the cursor in front of Display settings and press the F F button 2 Place the cursor in front of Temperature and press the F F button 3 Press the or button to select F or OFF 4 Exit all of the menus to activate your selection INTERFACE SELECTION The Interface Selection submenu displays the choices of the types of external devices that will interface to the Prosecutor System Thi
30. on Under the Display setting place the cursor in front of vertical position Press the F F button to select vertical position Asmall box will pop up on the screen Press the or button to select the appropriate vertical position After selecting the position press the F F button Exit all of the menus to activate your selection O1 ROD Prosecutor of Texas LLC Humble Texas 30 Programming Gray Scale Background Gray Scale Background color sets the gray scale and background color of the alphanumeric text on the display Follow the procedure below to set the gray scale or background color Under the Display setting place the cursor in front of gray scale back ground color Press the F F button to select gray scale background color small box will pop up on the screen Press the or button to select the appropriate gray scale or background color After selecting the gray scale or background color press the F F button Exit all of the menus to activate your selection O1 BR D Input Voltage The DVR can display the input voltage on the screen You can turn off or on the voltage message from the display settings LOW VOLTAGE message will start flashing on the screen if the input voltage is less than 9V If the voltage is less than 9V and the cassette is out then a CASS OUT message will start flashing o
31. on of such equipment or material or charges for transportation handling and shipping except as provided in Seller s written service policy No Product shall be returned without Seller s consent SELLER SHALL NOT BE LIABLE FOR ANY SPECIAL DIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OF A COMMERCIAL NATURE ARISING OUT THE USE OF OR INABILITY TO USE SELLER S PRODUCT BY REASON OF THE FACT THAT SUCH PRODUCT DOES NOT CONFORM TO THE CON TRACT OR TO ANY EXPRESS OR IMPLIED WARRANTY SELLER S MAXIMUM LIABILITY SHALL BE LIMITED TO THE COST OF REPAIR AND OR REPLACEMENT OF THE PRODUCT CLAIMED TO BE DEFECTIVE OR NONCONFORMING SUBJECT TO SELLER S RIGHT OF REMOVAL AND RETURN OF PRODUCT All of the foregoing shall constitute Buyer s sole and exclusive remedy and Seller s sole and exclusive liability for supplying nonconforming or defective Product 9 Credit Approval Shipments and deliveries of Product shall at all times be subject to the approval of Seller s Credit Department If Buyer shall fail to make any payments in accordance with the terms and provisions of this agreement Seller in addition to its other rights and remedies but not in limitation thereof may at its option decline to make shipments or deliveries hereunder except upon receipt of payment or satisfactory security or upon such terms and conditions satisfactory to Seller 10 Terms of Payment Payment terms for goods shipped hereunder will be net thirty 30 days from the d
32. one end and a4 pin connector on the other end Verify the 4 pin connector is connected to the vault in the trunk Route the cable through the rear seat panel under the back seat and carpet to the battery area of the car routing through the firewall to the battery is preferred Secure the red wire through the firewall to 12V to the battery Connect the black and green wires together to chassis ground View of DB 25 and power cables View of DB 25 located on front View of DB 25 cable under headliner coming from trunk positioned behind passenger side under trim heading heading toward control head the rear passenger side seat upward toward headliner Note power heading toward front passenger cable will go through firewall towards seat Note cables go under carpet battery Final Assembly Attach the front camera to the camera mount and attach the camera cable to the control box Also attach the control cable interface cable and LED cable to the control box Securing the cables out of sight in the headliner mount the control head to the back plate using the 2 screws that were previously removed Secure vault to base plate and lock in place Verify cables are properly routed and are not pinched or in a bind View of camera being attached to View of DB 25 interface LED View of control head being mounted windshield mount Note cable of camera and power cables being with wires already attached to camera goes upwa
33. or any reason be declared invalid such decision shall not affect the validity of the remaining portion which will remain in force and effect as if this agreement had been executed with the invalid portion eliminated Prosecutor of Texas LLC Humble Texas 39 Prosecutor of Texas LLC 1906 Treble Drive Humble TX 77338 Tel 281 446 9010 Fax 281 446 9010 Email prosecutoroftexas policevideo com Website www policevideo com 40
34. or in front of the Set Time Date and press the F F button 2 The Time and Date window will pop up on the screen as shown in the figure below Prosecutor of Texas LLC Humble Texas 23 Programming 1 11 37P 3 12 04TH 3 By pressing the or button you can change the Time or Date 4 Press the REW and F F button to move the cursor either left or right side 5 After setting the Time and or Date press the STOP button 6 Exit all of the menus to activate your selection Reset Time amp Date Under the Time amp Date menu select Reset Time Date Press and release the F F button It will reset the time and date to the factory default settings Exit all of the menus to activate your selection BOD TITLER You can program up to a 20 character title on the screen Follow the following steps to program the title on the screen The default title is PROSECUTOR DIGITAL 1 Press the STOP button of the remote control to access the main menu 2 Place the cursor in front of the title using the or button then press and release F F button to accept the selection Use the or button to select an alphanumeric character Use the F F button to enter next character or use REW button to edit a previously entered character You can enter up to 20 characters in a title After entering the title p
35. ound The following are the Radar Guns currently available to interface directly with the Prosecutor System If you do not see the desired unit on this list please contact the factory for updated continuously Select Radar Gun Decatur Genesys and II Decatur Hunter Generic Kustom MPH Python Municipal TS 4 RG2RS Stalker Dual SL Next Page Exit Laser Guns LTI 20 20 GPS NEMA 0183 LAT LONG NEMA 0183 LAT LONG SPD Alcohol Meter AlcolMeter SD 400P Intoxilyzer 400 RG2RS This is a special Radar Gun Interface which when installed with the Proseuctor System will enable the following radar guns to connect to the DVR The RG2RS must be purchased separately and is not included with the Prosecutor System The following are the Radar Guns supported by the RG2RS Prosecutor of Texas LLC Humble Texas 32 Programming ACM STALKER Decatur HUNTER GENESYS 1 a II KUSTOM KR 10SP TROOPER MPH K 55 TARGETRON RAPID FIRE PLUS BAUD RATE Here you select the correct Baud Rate for your Radar gun The choices available are 1200 2400 4800 amp 9600 MASTER RESET Master Reset resets all the programming to factory default settings Follow the steps below to do a Master Reset Under the main menu place the cursor in front of Master Reset Press the F F button to choose the selection The master reset menu will pop up on the screen Use the or buttons to place the c
36. our selection 4 To exit out of the Display Time amp Date place cursor in front of Exit and press the F F button 5 Exit out of all of the menus to activate above your selection Time Date T D Display ON Time Format 12 Hour Date Format MM DD YY Day light Saving DISABLED Set Time Date Reset Time Date Exit Selecting Time Format Place the cursor in front of Time Format and press and release the F F button The cursor will start blinking Now push the or button to select either the 12 or 24 time display modes After selecting the desired mode press and release the F F button Exit all of the menus to activate your selection O1 D gt Selecting Date Format 1 Under the Time amp Date menu place the cursor in front of Date Format and press the F F button 2 The cursor will start blinking 3 Chose the format from the selection yy mm dd or mm dd yy or dd mm yy by pressing either the or button 4 Exit of all the menus to activate your selection Daylight Saving 1 Inthe Time Date menu move the cursor to Daylight Saving and press the FF button The cursor will startblinking 2 Press the and buttons to change the value to U S A Canada or DISABLED 3 Exit all of the menus to activate your programming changes Set Time amp Date 1 Under the Time amp Date menu place the curs
37. r View ALARM REC DWELL The setting you choose will be the minimum recording time after the Alarm Record Signal goes from high to low or active to inactive The default setting is 30 minutes From the Main Menu select the Record Settings sub menu by moving the cursor to that item and pressing the F F button on the remote control Then select ALARM REC DWELL The cursor will start blinking Press the and buttons to change the settings The available settings are from 0 to 180 minutes in one minute increments Exit all of the menus to activate your programming changes Prosecutor of Texas LLC Humble Texas 29 Programming DISPLAY SETTINGS The DVR adds alphanumeric information to the video signal from the camera and sends it to the DVR for recording or to the monitor to display The display settings let you select the position the gray scale and the format of the text Following are the options in display settings Display Format The display format displays alphanumeric information either on the top or bottom of the screen To set the display use the following instructions 1 From the remote control press the STOP button for 5 seconds the main menu will pop up on the screen 2 Under the main menu move the cursor in front of Display Setting and press the F F button 3 The Display Setting menu will pop up on the screen as shown in the figure below Screen Setting Display Forma
38. r cable to the vault 8 Make sure POWER button on the control head is the only button thatlights up If not check the MON ON OFF switch on the left side of the control head NOoORWD ll System Test 1 Ensure that the hard drive has been inserted into the DVR Ensure that the toggle key on the back of the vault is in the vertical position for Ready to Record Playback mode 2 Press POWER button to power up the system Check that the video is present and that the monitor has a quality image 3 Check ZOOM and FOCUS buttons function A beep should sound whenever a button is pressed confirm the camera focus on object when any ZOOM button is pressed 4 Check RECORD PLAY STOP REW FF functions A beep sound is made when a button is pressed 5 With the transmitter walk about 300 feet in front of the vehicle Turn the transmitter ON Talk clearly into the MIC After 2 3 seconds the RECORD and AUDIO ON indicators should illuminate on the control head Also the windshield LED should illuminate 6 Turn OFF the MIC The DVR should continue recording The AUDIO ON indicator should be off and the RECORD indicator should be on 7 Check STOP REW and PLAY on the recorded video Check the quality of the recorded video and audio 8 Turn the siren switch The system should go to record and the SRN message should appear in the video 9 Turn ON the light bar switch The system should go to RECORD and the LTS me
39. rds into headliner connected to control head connections Reinstall previously removed panel trim seats and other hardware Reconnect car battery cables Power Up the System After completing the installation assembly turn on the volume monitor control switch If the light on the POWER does not turn on check all the system connections and fuse in the power cable near the car battery If the POWER light is illuminated on the control head the system can be turned on by using one of the following methods Control head activation Press the POWER button on the control head Microphone activation Place the remote microphone transmitter power switch the ON position The system will be powered up and AUDIO ON and RECORD indicators should illuminate The audio receiver powers up automatically when the power cable is connected to the battery and the control cable is connected to the control head Prosecutor of Texas LLC Humble Texas 17 Connections GREEN GROUND BLACK SIREN Q INTERFACE CABLE To RECORD ON and AUDIO ON LED FRONT CAMERA A V Connector Mic Backseat Coa Program Lock Circuit Breaker t lo LoT _ a A V Connector Optional 900MHz Microphone L L Ir gt o GND BLACK AND BLUE Power Gable Figure 14 Description of Connections Prosecutor of Texas LLC Humble Texas 18 Basic
40. recommendations Recommended PC for the playback of the video is 2 8 GHz CPU 256 MB RAM a big hard disk minimum 120 GB and a good graphics card like nVidia 5200FX The video will work on slower PC s but frames may be skipped For the copying and conversion any PC will do but faster PC means faster copying and conversion Prosecutor of Texas LLC Humble Texas Warranty Information PROSECUTOR OF TEXAS LLC TERMS amp CONDITIONS OF SALE AND LIMITED WARRANTY In consideration of PROSECUTOR OF TEXAS Seller selling its products to Buyer and for all sales by Seller unless specifically agreed in writing by Seller the following Terms amp Conditions shall exclusively apply to all such sales regardless of any other documents prior agreements or prior course of dealing 1 Acceptance The acceptance of all offers by Seller is expressly limited to the terms herein AND ANY ADDITIONAL OR DIFFERENT TERMS SUGGESTED BY BUYER OR PRINTED ON BUYER S OWN TERMS AND CONDITIONS ARE HEREBY REJECTED UNLESS EXPRESSLY ASSENTED TO IN WRITING BY SELLER 2 Shipment and Deliveries a Unless otherwise specifically agreed to in writing Seller does not guarantee a particular date for shipment or delivery of the goods quoted Shipment and delivery dates quoted are estimates of approximate dates b Unless otherwise specified all shipments and deliveries shall be F O B Seller s warehouse dock in Hous ton Texas Upon shipment reque
41. ress and release the STOP button to exit out of the title editing mode Exit all of the menus to activate your selection Thing to know button moves the alphabet in ascending order and numerics in descending order o NO of button moves the alphabet in descending order and the numerics in ascending order F F button moves the cursor toward the right postion REW back space STOP Exits out of the editing mode MESSAGES The Prosecutor Digital System has five message inputs that can appear on screen Each message can display up to 6 characters These messages are activated on the LCD display when the control head gets a signal from the interface cable See the Installation section for the connections pin outs of the interface cable Three message inputs are standard with the system By default these are SRN when the siren is turned on LTS when the lights are turned on and AUD when the audio is turned on Messages 4 and 5 are options for brakes and turn signal and can be purchased separately from Prosecutor Prosecutor of Texas LLC Humble Texas 24 Programming Set Message 1 Enter the main menu programming mode 2 Place the cursor in front of Message using the or button 3 Press the F F button and the above menu will pop up on the screen Set Message Set message Set message record Exit 1 Place the cursor in f
42. ront of Set Message using the or button 2 Press the F F button and the following menu will pop up on the screen Set Message Message 1 Message 2 Message 3 Message 4 Message 5 Exit Place the cursor in front of the message that you want to change and press the F F button Ablinking cursor will appear on the screen Enter the letter or numeric character using the or buttons After entering the first letter press the F F button to move the cursor to the next place Again use the or button to select the next letter Repeat steps 3 to 5 until you enter the complete title After entering the title press the Stop button it will return you to the Set Message menu Enter the all the remaining messages the same way Select Exit to return to the Message Menu O1 BR D Set Message Record 1 Place the cursor in front of Set Message record using the or button 2 Press the F F button and the following menu will pop up on the screen Set Message Record Message 1 Message 2 Message 3 Message 4 Message 5 Exit Prosecutor of Texas LLC Humble Texas 25 Programming Place the cursor in front of the message that you want to change and press the F F button Ablinking cursor will appear on the screen Using the or buttons toggle between ON or OFF Af
43. s includes radar guns laser speed guns GPS Alcohol Testers Laptops Data Radios Accel erometers and any RS 232 compatible device This menu also lets you setthe baud rate between the interface and the external device The following menu will appear if you select the Interface Selection from the main menu Interface Selection Enable Interface OFF Generic Select Radar Gun Select Laser Gun Select GPS Select Alcohol Meter Set Baud Rate Exit Prosecutor of Texas LLC Humble Texas 31 Programming 1 Under the Interface Selection menu above place the cursor in front of the desired selection line by using the and buttons and press the F F button to select that programming line 2 Press the or button to select the desired sub menu programming line 3 When you have located the make and model of the interface you desire press F F to select and the menu will automatically exit back to the manin Interface Selection menu above 4 Select Exit to go back to the Main Menu To enable or disable the Interface completely select the first line Enable Interface via the F F button and use the and buttons to toggle ON or OFF NOTE Generic This accepts any RS 232 data and displays it on the monitor This can be from a computer data radio laptop or other device with RS 232 communications The DB 9 Connector uses Pin 2 for RXD Recieving Data and Pin 5 which is gr
44. s of God or other events beyond the control of Seller 4 products or parts thereof that have had serial numbers removed altered or defaced 5 products received for repair without a RMA number and a sales or delivery receipt showing the date of original purchase 6 hostile operating conditions 7 use of components that do not meet Seller s specifications 8 damage or failure caused by or resulting from the operation of the product with incorrect voltage 9 external parts such as cabinets or keypads 10 periodic maintenance and adjustments resulting from normal use such as video head clean ing etc and 11 damage resulting from using cleaning cassettes g In the event Buyer makes a warranty claim and Seller s warranty does not apply Buyer shall reimburse Seller for all reasonable expenses incurred by Seller in diagnosing the installation repair problem Seller shall not be responsible for any damages to the Product or other property due to installation or service by a party not authorized by Seller 8 Buyer s Exclusive Remedies If the Product to be supplied to Buyer shall fail to conform to this contract or any applicable express or implied warranty Buyer shall immediately notify Seller of such condition and afford Seller a reasonable opportunity to inspect said Product Seller shall at its option either repair or replace such nonconforming Product Seller shall not be responsible for labor charges for removal or installati
45. ssage should appear in the video 10 Turn OFF the power Turn ON the light bar switch The system should power up and go to RECORD and the LTS message should appear in the video 11 Switch the BSEAT rocker to back seat MIC Talk into the back seat MIC Check the audio quality Pay special attention to background noise 12 Check the monitor for back seat images and video quality If there is no backseat camera the video should show the main camera 13 Switch the BSEAT rocker to the original position Check the monitor for camera images lll System Programming Using the hand held IR remote point it to the control head and perform the following functions 1 Ensure that the toggle key on the back of the vault is in the horizontal position for Ready to Program mode 2 Do a Master Reset by pressing PAUSE STILL for at least 6 seconds 3 Make note of the version number 3 A completed copy of this Installation Work Sheet must be mailed to the following address to activate warranty coverage Failure to submit this document within 10 days from installation will void the product warranty Prosecutor of Texas Warranty Registration 1906 Treble Drive Humble TX 7338 Prosecutor After Installation Test Worksheet Sales Order Serial m Wireless frequency PASS Ill System Programming VERSION 4 Press and hold STOP for 5 seconds to get into Programming Menu From the Main Menu check the default settings Set Ti
46. st Seller shall only assume expenses and risks of placing the goods quoted into the possession of the carrier making contracts for the transportation of such goods as may be reasonable under the existing circumstances at time of shipment giving notification to Buyer of shipment and delivering or tendering in due form any document necessary to obtain possession of the goods ANY LOSSES DAMAGES OR CLAIMS ARISING OUT OF THE ACTS OR OMISSIONS OF THE CARRIER SHALL BE THE RESPONSIBILITY OF THE BUYER c If partial shipments are contemplated pursuant to the order Seller shall have the right to deliver any portion of the equipment or material ordered and to bill Buyer therefor Buyer agrees to pay for the same in accordance with the terms of payment herein 3 Assignment This Agreement is not assignable without written consent of Seller and any attempted assignment without such con sent shall be void 4 Excusable Delays Seller shall be excused from and under no circumstances shall be liable for any loss of damage caused by included but not limited to delay in performance or failure to fill any order or orders due to fire strikes labor matters governmental regulations acts of the elements transportation failure to receive materials or causes of a like or different nature reasonably beyond its control in the reasonable conduct of its business 5 Returns Returns of standard stocking items with no restocking fee can only be made
47. t Bottom Horizontal Position Veritical Position Gray Scale Background Input Voltage Temperature Exit Under the Display Setting menu place the cursor in front of Display Format using the or button To select a display format press the F F button Now choose either Top or Bottom using the or button Press the F F button to chose your selection Exit all of the menus to activate your selection ONO Horizontal Position Horizontal position sets the alphanumeric text position horizontally Follow the steps below to set the Horizon tal position Under the display setting menu place your cursor in front of Horizontal Position Press the F F button to select the horizontal position Asmall box will pop up on the screen Press the or button to select the appropriate position After selecting the position press the F F button Exit all of the menus to activate your selection O1 ROD Vertical Position Vertical position sets the alphanumeric text position vertically If the Display Format is set on TOP then the vertical position lets you choose the position from the top of the screen to the middle of the screen If the display format is set to the bottom then the vertical position can be moved from the middle of the screen to the bottom of the screen Follow the steps below to set the vertical positi
48. t any selection Press this button to move the cursor up Press this button to move the cursor down ACCESSING MAIN MENU To access the on screen programming press the STOP button of the remote control for about 5 seconds If you get the Programming is Locked message then you must first unlock the Programming key lock on the rear of the vault The following programming menu will be appear on the monitor of the control head LCD If you have never changed the factory default password then just press STOP again on the IR remote The following Main Menu will appear User Passwod 00000000 If you have previously selected a password other than the default you will need you will need to enter in that password now See Section Set Time Date Titler Messages Mode and Password Record Settings Display Settings Interface Selection Master Reset Exit Prosecutor of Texas LLC Humble Texas 22 Programming TIME amp DATE SETUP An Internal clock generates the time and date that is super imposed onthe LCD display After the clock is set the date and time modes are displayed on the monitor screen live picture Display Time amp Date on Screen 1 Under the Display Time amp Date menu place the cursor in front of T D display and press the F F button of the remote control 2 Press the or button to select ON or OFF 3 Press the F F button again to make y
49. ter selection press the F F button Again use the or button to select the next Message to program Repeat steps 1 to 5 until you entered all messages Select Exit to return to the Message Menu Select Exit again to return to the Main Menu gt MODE AND PASSWORD This menu is the administration menu that only authorized persons should enter It allows you to change the basic configuration of the Prosecutor System operational mode from Hot climates to Normal climates Do not change the operational mode of the Prosecutor without consulting the factory for the unit is specially configured at the factory for either of these operational modes Also this menu allows access to change the user password and the administrator passwords Make sure you write down the passwords for future reference so you do not forget All passwords are case sensitive 1 Enter the main menu programming mode 2 Place the cursor in front of Message using the or button 3 Press the F F button and the above menu will pop up on the screen Mode and Password Change User Password Change Admin Password Climate Setting Normal Exit Place the cursor in front of Change User Password using the or button 2 Press the F F button and the following menu will pop up on the screen User Password 00000000 Enter the current password If you ha
50. the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not in stalled and used in accor dance with the instructions manual may cause the harmful interfer ence to radio communications Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense USER INSTALLER CAUTIONS YOUR AUTHORITY TO OPERATE THIS FCC VERIFIED EQUIPMENT COULD BE VOIDED IF YOU MAKE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THIS PARTY RESPONSIBLE FOR COMPLIANCE TO PART 15 OF THE FCC RULES COPYRIGHT C PROSECUTOR OF TEXAS LLC 1998 2004 Compliant Table of Contents Foreword YD Section 1 Feature amp Specifications 10 Section 2 Instruction in Brief 13 Section 3 Installation Section 4 Connection 20 Section 5 Basic Operation Section 6 Programming 24 Section 7 Play back 36 Section 8 Software 37 Section 9 Warranty Information 39 Section 10 Notes 42 LIST OF FIGURE Figure 1 Prosecutor System 10 Figure 2 Camera 10 Figure 3 Modular Control Head 10 Figure4 Vaut gt 1 A PN Figure 5 Wiring Harness 11 Figure 6 DVR in Vault 1 1 1 T1 Figure 7 VHF Audio Transmitter and Receiver 12 Figure 8 900 MHz Spread Spectrum Transmitter and Receiver Optional 12 Figur
51. ting plate between the sun visors such that when the control head is attached the monitor can be viewed from driver s position Align the hole over the sun visor s inner attachment holes and rein stall the sun visor attachments making sure the control head mount ing plate is captured by the attachments If additional support is desired requires making holes in headliner 3 4 inch self drilling screws can be used to attach the mounting plate to the secondary metal under the head liner Wait to mount the control head until the end of the installation 4 Attaching the control head mounting plate between the sun visors Note If you have a ticket light round light added to your vehicle you have to use the ticket light adapter To determine wether or not you need the ticket light adapter position the control head behind the light You should have atleast 2 inches between the control head and window but still be able to get to the monitor controls on top of the control head Most Ford Crown Victoria s will not need this Most Chevy Caprices will Antenna Mount This is a common lip antenna Position the antenna at the desired location on top of the trunk For mounting see the instructions enclosed with the antenna Note If the Radio Frequency Interface is significant a permanent 1 4 or 1 2 inch wave VHF antenna may be needed to mount through the fender of trunk Rear Camera amp Microphone Position the camera and
52. ursor in front of Do Master Reset Press the F F button to perform a master reset on the DVR Acopyright menu will pop up on the screen notifying you that the DVR has been reset O1 ROD Warning If you do a Master reset this will clear all settings and exit the programing mode 33 Playback RECORD PROTECTION The DVR utilizes Wavelet compression technology which captures each frame truely without manipulation of video clip In addition the video is water marked with date and time making it completely tamper proof PLAYBACK The video from the DVR can be played back using 3 methods In Vehicle Playback First ensure that the toggle key on the back of the vault is in the vertical position for Ready to Record Playback mode Using the buttons on the control head press PLAY REW FF and STOP as applicable to play back the video on the control head s monitor Playback on a PC The Prosecutor Digital System comes with a second IDE Mobile Rack which when installed in the drive bay of a PC is used to insert the hard disk from the DVR Also provided is a compact disc containing the easy to use DVR Clipper software which when installed on the PC is used to view and clip any segment of the video on the hard disk The DVR Clipper software saves the video segment as an AVI file on the PC which can then be played back using any standard PC multmedia playback software Playback on a DVR An additional Cobr
53. utton to Zoom Out the image of the front camera 7 NEAR FOCUS Press this button to focus the objects 8 FAR FOCUS 18 19 17 Press this button to focus the objects Figure 10 Description of Beside Control Head 9 STOP Press this button to STOP the tape 10 REWIND 23 20 24 21 22 25 Press this button to perform reverse playback when in the Play mode 11 PLAY Press this button to play the video 12 FF Press this button to perform fast forward playback when in FRERES Figure 11 Description of Rear Panel Control Head the Play mode Prosecutor of Texas LLC Humble Texas 11 Instructions in Brief 13 RECORD Press this button to start the recording The light on the RECORD button No 4 will be on when the DVR is in the Record mode 14 IR REMOTE SENSOR Point the IR remote control toward the sensor 15 POWER Press to turn the power on and off 16 MONITOR LCD DISPLAY This displays the live images from the camera or recorded video from the DVR 17 SPEAKERS Plays the live sound from the microphone or from the DVR 18 BRIGHTNESS This controls the brightness of the LCD display 19 VOLUME MONITOR CONTROL Move this knob clockwise or counter clockwise to control the speaker s volume You can also control the LCD monitor and control head s display light by this knob 1 Antenna Connector PL259 2 Power Connector 4 Pin Din 3 Rear Camera amp microphone conne
54. ve never previously entered a password press STOP Press FF button to select letters or numbers Use the up button to select numbers and the down button to select letters Press STOP when you have entered the entire password correctly Case Sensitive ROD After entering the current password the following will be displayed New User Password 00000000 1 Enter the new password 2 Press FF button to select letters or numbers 3 Use the up button to select numbers and the down button to select letters 4 Press STOP when you have entered the entire password correctly Case Sensitive After entering the new password the following will be displayed Prosecutor of Texas LLC Humble Texas 26 Programming Confirm Password 00000000 1 Enter the new password again by the same method above 2 Press STOP when you have entered the entire password correctly Case Sensitive You will return back to the Mode and Password Menu Administrator Password To change the Administrator Password select Change Admin Password from the Mode and Password menu Follow the steps similar to changing the User password Climate Setting 1 Place the cursor in front of Climate Setting using the or button 2 Press the F F button and you will note a blinking cursor in front of the selection 3 Use the or to toggle the sele
55. within thirty 30 days of invoice to Buyer All such returns must be in unopened original packaging Any other returns must have prior written consent of Seller and restocking fee of not less than fifty percent 5096 will apply Prosecutor of Texas LLC Humble Texas 36 Warranty Information 6 Changes or Cancellation Order may be changed or canceled by Buyer only with the consent of Seller and upon payment of equitable adjustment charge or cancellation charges Such charges shall take into account costs and expensesthereto incurred purchase or contract commitments made by the Seller and all other losses due to such modifications or cancellations including a reasonable profit 7 Limited Warranty The only warranty to Buyer is the one printed on the warranty certificate included with the product except as otherwise provided in any written agreement signed by Seller a SELLER S PRINTED PRODUCT WARRANTY For 90 days from the date of shipment Seller will pay for parts and labor and Seller will for a period of one 1 year from date of shipment pay for parts only Seller warrants to Buyer that the equipment and materials quoted is free from defects in material or workmanship UNDER NORMAL USE AND SERVICE If a printed product warranty certificate is supplied with the equipment and such certificate specifies a warranty period of a longer duration said warranty certificate shall control the length of the warranty period If said warranty c
56. xas LLC Humble Texas 14 Installations Measure 6 5 16 back from the center of the first hole get the center point of the secondhole and use 17 64 metal dril bit to make a hole Put the carpet back on punch holes through carpet to match _ drilled holes Place 2 7 x 1 Hex head bolts on the left 2 holes of mounting plate remember thumbscrew of the mount ing plate should face to the bumper direction and match holes drilled in trunk floor Place flat washer then lock washers and hex nuts or lock nuts on bolts from outside of trunk floor Tighten bolts to secure mounting plate j s 4 Le i Place a hex head sheet metal screw Put the vault on mounting plate and at the middle hole of mounting plate lock them together by using the mounting plate thumb screw Connect all applicable cables to the vault Attaching the cables to the rear of the vault Connect the control head cable rear camera and MIC cable antenna cable and the power cable to the rear of the vault Bundle the cables to create a service loop so that the vault can easily be unlocked removed from the base plate and cables disconnected Prosecutor of Texas LLC Humble Texas 15 Installations Control Head Remove the control head mounting plate from the control head 4 screws on front Remove the sun visors inner attachments closest to the rear view mirror Position the control head moun
Download Pdf Manuals
Related Search