CLS Dennis RGB Wallwasher
Contents
1. will begin to flash 3 Use the UP DOWN keys to choose the required Macro value for the current scene 4 Press Enter to exit the MAC menu and confirm Step 10 Scene Time Each scene in a program can be run with the required times There are two types of scene times Total scene time STIME expressed in hours minutes and seconds Scene fade time FTIME expressed in hours minutes and seconds The scene time is the total time occupied by the scene in the program whereas fade time is the time taken by the scene s channel status to reach the appropriate level Scene time i The STIME menu gives access to the adjustment of the total scene time The time can be configured in hours minutes and seconds Use the UP key to select the TM_H menu Press Enter and will begin to flash Use the UP DOWN keys to choose the number of hours the current scene has to last Press Enter to exit the TM_H menu and confirm Use the UP key to select the TM_M menu Press Enter and will begin to flash Use the UP DOWN keys to choose the number of minutes the current scene has to last Press Enter to exit the TM_M menu and confirm Use the UP key to select the TM_S menu Press Enter and will begin to flash Use the UP DOWN keys to choose the number of seconds the current scene has to last Press Enter to exit the TM_S menu2. Stand alone mode Use the UP DOWN keys to find the TIME menu Hold the Enter key pressed down for approx 6 seconds The display shows YEAR Press Enter to change the year Use the UP DOWN keys to select the current year Press Enter to save Use the UP key to select the M D Press Enter to change the month 285 www cls led com CLS Dennis RGB Wallwasher Use the UP DOWN keys to select the current month Press Enter to change the day Use the UP DOWN keys to select the current day Press Enter to save Use the UP key to select the H M Press Enter to change the hour Use the UP DOWN keys to select the current hour Press Enter to change the minutes Use the UP DOWN keys to select the current minutes Press Enter to save Use the UP key to select the WEEK Press Enter to change the day of the week Use the UP DOWN keys to select the current day of the week Press Enter to save Hold the Enter key pressed down for approx 6 seconds to exit the time menu 4 4 Factory settings With this function you can get back to factory settings Use the UP DOWN keys to find the FACT menu Press Enter to confirm the choice The text on the display will begin to flash Use the UP DOWN keys to select SET Press Enter to set the default parameters Resetting default paramet
3. Use the UP DOWN keys to choose ON or OFF according to requirements 4 Press Enter to exit the SCHED menu and confirm TECHNICAL SPECIFICATIONS The head can be moved in relation to the base PAN 45 and TILT 75 15 can be locked in the desired position Voltage 200 240 VAC Power consumption 160 VA max LEDs 24 x red 18 x green and 7 x blue LEDs IP rating IP65 Measurements 410 x 427 x 232 mm wxh xd Weight 13 5 kg Shipping weight 18 2 kg 2007 CLS LED BV All rights reserved Information subject to change without notice CLS LED BV and all affiliated companies disclaim liability for injury damage direct or indirect loss consequential or economic loss or any other loss occasioned by the use of inability to use or reliance on the information contained in this manual No part of this manual may be reproduced in any form or by any means without permission in writing from CLS LED BV Other legal information can be found in our General conditions to be found on the back of your CLS LED BV invoice or on our website www cls led com Conditions 16 www cls led com
4. 19 10 20 255 138 o Creative Lighting Solutions Function Shutter closed Shutter open Linear Strobe frequency adjustment from 1 to 20 hz Pulse open effect low speed Pulse open effect medium speed Pulse open effect high speed Pulce close effect low speed Pulse close effect medium speed Pulse close effect high speed Random strobe effect low speed Random strobe effect medium speed Random strobe effect high speed Shutter open Function Linear intensity adjustment 0 100 Function Linear Red adjustment 0 100 Function Linear Green adjustment 0 100 Function Linear Blue adjustment 0 100 Function OFF From Cold 2000 K compared to balanced white or not Macro Channel Ch 7 DMX Value Mean Value 0 7 4 8 15 12 16 23 20 24 31 28 32 39 36 40 47 44 48 55 52 56 63 60 64 70 86 71 71 72 79 76 80 87 84 88 95 92 96 103 100 104 111 108 112 119 116 120 136 128 Colour Mode Channel Ch 8 DMX Value Mean Value 0 63 32 64 189 127 190 250 220 251 255 253 Colour temperature Function NO MACRO MACRO 1 Rainbow Slow Stand Time 5 sec MACRO 2 Rainbow Medium Stand Time 5 sec MACRO 3 Rainbow Fast Stand Time 5 sec MACRO 4 Rainbow Slow NO Stand Time MACRO 5 Rainbow Medium NO Stand Time MACRO 6 Rainbow Fast NO Stand Time MACRO 7 Rainbow Very Slow NO Stand Time MACRO 8 Random Colour Show Store Colour_mode enable MACRO 9 Ranom Colour Medium MACRO 10
5. Random Colour Fast Future Future Future Future Future Function White balance disabled Full Colour White balance enabled Balanced White balance disabled Full Colour Store a new white balance The CTC channel allows to adjust CLS Dennis RGB Wallwasher s colour temperature It acts in a range around the white balance or Full Colour Shutter Strobe The Shutter Strobe channel allows an endless number of shutter effects to be achieved As well as the adjustable frequency strobe effect from 1 Hz to 20 Hz it s possible to create Random Strobe effects at three different speeds Low Medium High CLS Dennis RGB Wallwasher is also fitted with a Pulse Open and Close effect for each of the three different speeds Low Medium High 6 wwuw cls led com CLS Dennis RGB Wallwasher 4 1 Menus Control panel The control panel is needed to access CLS Dennis RGB Wallwasher s settings and programming functions UP DOWN KEYS Used to scroll through the menu items Once the required menu has been selected these keys are used to choose the available parameters ENTER KEY Confirms access to the selected menu and any parameters changed in it Addressing This menu gives access to fixture addressing functions See Installation Addressing Chapter Use the UP DOWN keys to find the A menu Press Enter to confirm the choice The text on the display will begin to flash Use the UP DOWN keys to select the
6. and Blue e General fixture operating time meter e Panel with LED display and three buttons Control signals e DMX 512 input signal e Stand alone operation with built in programs e Day to day control of the on board programs on a weekly basis e Stand alone operation of systems with up to 30 fixtures via Master Slave INSTALLATION Mounting the fixture CLS Dennis RGB Wallwasher is controllable with a DMX 512 signal according to the USITT DMX 512 1990 Cables for DMX connection are fitted with standard XLR 3 Pin connectors Installation and positioning CLS Dennis RGB Wallwasher can be permanently mounted in the case of fixed installations by means of the four holes on it s base The distance between the holes is 340 mm on the front and 195 mm on the side The required movement is fixed by means of the screws on the head support The hex keys for fixing PAN and TILT are supplied with the fixture and are respectively 8 mm and 3 mm keys g Creative Lighting Solutions 3 Addressing the fixture Push the UP button A will appear on the display showing that the fixture is addressed to DMX channel ATTENTION Lf the flashing message NO SIGNAL or SIGNAL ERROR appears this means that the fixture is not receiving a DMX signal or is receiving an incorrect signal To change the DMX address Press the UP key The message A will appear e Press Enter and will begin to flash e Use the UP and Down
7. and confirm Step 10 Fade time The FTIME menu gives access to the adjustment of the scene fade time The time can be configured in hours minutes and seconds o Creative Lighting Solutions 13 Use the UP key to select the FD_H menu Press Enter and will begin to flash Use the UP DOWN keys to choose the number of hours of the current scene s fade time Press Enter to exit the FD _H menu and confirm Use the UP key to select the FD_M menu Press Enter and will begin to flash Use the UP DOWN keys to choose the number of minutes of the current scene s fade time Press Enter to exit the FD_M menu and confirm Use the UP key to pass to the FD_S menu Press Enter and will begin to flash Use the UP DOWN keys to choose the number of seconds of the current scene s fade time Press Enter to exit the FD_S menu and confirm ATTENTION The program does not display the scene if the scene time is ZERO If the scene time is less than the fade time the scene Wil not reach its value but will be cut along the fade time when the scene time finishes Step 11 Enabling scenes Enabling a scene decides if the scene will be run or not when the program is run The SCNRUN menu is also useful when it is necessary to temporarily eliminate the playback of some scenes in a program without cancelling them Use the UP key to pass to t
8. keys to choose the required address channel Press Enter again to confirm CLS Dennis RGB Wallwasher requires 8 DMX channels for control of all it s functions yw OPERATION ATTENTION Do not use more than 32 fixtures on one DMX line Should it be necessary to connect a larger number of fixtures there must be used a splitter bufter for each 32 fixtures to ensure that the signal quality remains unchanged Controlling the fixture via DMX The following table shows the control channels of the CLS Dennis RGB Wallwasher Channel DMX Ch 1 Ch 2 Ch 3 Ch 4 ch 5 Ch 6 Ch 7 Ch 8 Function Description Shutter Strobe Shutter and strobe functions are adjustble and random Pulse Functions Dimmer Luminous itensity control Red Continuous Red saturation control 0 100 Green Continuous Green saturation control 0 100 Blue Continuous Blue saturation control 0 100 CTC Continuous colour temperature control Macro Macro functions Mod_Colore White balance control 4 wwuw cls led com CLS Dennis RGB Wallwasher Strobe Shutter Channel Ch 1 DMX Value Mean Value 0 7 8 15 16 151 152 159 160 167 168 175 176 183 184 191 192 199 200 207 208 215 216 223 224 255 Dimmer Channel Ch 2 DMX Value Mean Value 0 255 Red Channel Ch 3 DMX Value Mean Value 0 255 Green Channel Ch 4 DMX Value Mean Value 0 255 Blue Channel Ch 5 DMX Value Mean Value 0 255 CTC Channel Ch 6 DMX Value Mean Value 0
9. CLS Manuals CLS Dennis RGB Wallwasher INTRODUCTION Thank you for choosing the CLS Dennis RGB Wallwasher The CLS Dennis RGB Wallwasher is an universal DMX controlled luminaire that uses 49 Luxeon and III LED s to create an even light output Creative Lighting Solutions Included Items The CLS Dennis RGB Wallwasher is shipped in one package containing the following items e 1 CLS Dennis RGB Wallwasher fixture e 2 CLS Dennis RGB Wallwasher Bracket e 1 CLS Dennis RGB Wallwasher User manual Optional Accessories e CLS DMX cable 0 8 meters Art nr 911200 e CLS DMX cable 10 0 meters Art nr 911206 e CLS DMX cable 1 5 meters Art nr 911201 e CLS DMX cable 15 0 meters Art nr 911207 e CLS DMX cable 3 0 meters Art nr 911203 e CLS DMX cable 20 0 meters Art nr 911209 e CLS DMX cable 5 0 meters Art nr 911205 ATTENTION It is important to read this manual before you install or use this product SAFETY INFORMATION Warning This product is for professional use only It is not for household use Read this manual before powering up or installing the CLS Dennis RGB Wallwasher Follow the instructions listed below and observe all warnings in this manual Protection from electric shock e Disconnect the power supply from AC power before installation dismounting or maintenance of the unit e Make sure all connectors are connected properly e Use only a source of AC power that complies with local building and electrical codes and has both overload a
10. SCHEDL menu Press Enter for a few seconds until the following appears EVENT 2 3 If it is necessary to create a event other than number 1 press Enter again and will begin to flash 4 Use the UP DOWN keys to choose the required event from 1 to 48 then Press Enter to exit the EVENT menu and confirm Step 2 Choosing the program number 1 Use the UP key to pass to the PROG menu 2 Press Enter and will begin to flash 3 Use the UP DOWN keys to choose the required program number from 1 to 5 to be controlled by scheduler 4 Press Enter to exit the PROG menu and confirm A 3 Choosing the day Use the UP key to pass to the DAY menu Press Enter and will begin to flash Use the UP DOWN keys to choose the day of the week which the event must begin The days of the week are expressed as follows e ALL Every day e TUE Tuesday e THU Thursday e MON Monday e WED Wednesday e FRI Friday Press Enter to exit the DAY menu and confirm e SAT Saturday e SUN Sunday Step 4 Start Time START TIME is used to configure the hour minutes and seconds in which an event containing a previously prepared program will start Use the UP key to select the START menu Press Enter and will begin to flash Use the UP DOWN keys to choose the hour when the program has to start from 0 to 23 Press Enter to select the mi
11. again and will begin to flash Use the UP DOWN keys to choose the required program number from 1 to 5 then Press Enter to exit the PROG menu and confirm a 2 Choosing The Scene Number Use the UP key to select the SCENE menu If it is necessary to create a program other than number 1 press Enter again and will begin to flash 3 Use the UP DOWN keys to choose the required scene number from 1 to 5 then Press Enter to exit the SCENE menu and confirm o Creative Lighting Solutions 11 Step 3 Choosing the fixture number Use the UP key to select the FIXT menu Press Enter and will begin to flash Use the UP DOWN keys to choose ALL if the scene to be created involves all fixtures MASTER SLAVES MSTR if the scene to be created involves just the Master fixture ODD if the scene to be created involves the odd numbered fixtures EVEN if the scene to be created involves the even numbered fixtures e SLV1 SLV29 if the scene to be created must have each slave fixture with its own channel status chosen individually 4 Press Enter to exit the FIXT menu and confirm Step 4 Shutter 1 Use the UP key to pass to the SHUTT menu 2 Press Enter and will begin to flash 3 Use the UP DOWN keys to choose the required value of the shutter channel for the current scene 4 Press Enter to exit the SHUTT menu and
12. confirm Step 5 Dimmer 1 Use the UP key to pass to the DIMER menu 2 Press Enter and will begin to flash 3 Use the UP DOWN keys to choose the required value of the dimmer channel for the current scene 4 Press Enter to exit the DIMER menu and confirm Step 6 Red 1 Use the UP key to pass to the R menu 2 Press Enter and will begin to flash 3 Use the UP DOWN keys to choose the required value of the Red channel for the current scene 4 Press Enter to exit the R menu and confirm Step 7 Green 1 Use the UP key to pass to the G menu 2 Press Enter and will begin to flash 3 Use the UP DOWN keys to choose the required value of the Green channel for the current scene 4 Press Enter to exit the G menu and confirm Step 8 Blue 1 Use the UP key to pass to the B menu 2 Press Enter and will begin to flash 3 Use the UP DOWN keys to choose the required value of the Blue channel for the current scene 4 Press Enter to exit the B menu and confirm 12 wwuw cls led com CLS Dennis RGB Wallwasher Step 9 Macro In the program it is possible to use scenes with effects pre programmed in the Macro channel Wherever Macros are used all the colour channel settings will be ignored 1 Use the UP key to pass to the MAC menu 2 Press Enter and
13. e display of the fixture s total operating time and can not be reset 1 Use the UP DOWN keys to find the R_h menu to display the operating time of all the Red LED s Resetting the Elapsed Time Meter 1 hold the ENTER key pressed down for approx 6 seconds until R_h flashes 2 Use the UP DOWN keys to find set the elapsed time meter at zero 3 Press ENTER to confirm Use the same procedure for G_h Green and B_h Blue Display brightness Operators can select one of the brightness s available for the CLS Dennis RGB Wallwasher To adjust display brightness proceed as follows Use the UP DOWN keys to find the Bright menu Press Enter to confirm the choice The text on the display will begin to flash Use the UP DOWN keys to select the required option from those available Press Enter to confirm the changes 4 2 Flip display When the fixture is suspended upside down from a structure the operator can turn the text on the display through 180 thus enabling the menus available to be easily read To change the reading angle proceed as follows Use the UP DOWN keys to find the Dspfli menu Press Enter to confirm the choice The text on the display will begin to flash Use the UP DOWN keys to select the required option Press Enter to confirm the changes 4 3 Time It is important to set CLS Dennis RGB Wallwasher s on board clock if it has to be used later in
14. ers This enables to reset the parameter values immediately before the FACT operation In other words if the default parameters have been set by mistake this operation allows to revert to the values set as saved previously Use the UP DOWN keys to find the Prev menu Press Enter and hold it down for a few seconds to confirm the choice The text on the display will begin to flash Use the UP DOWN keys to select SET Press Enter to accept this Poea Lighting Solutions a9 Test functions Using the test menu it is possible to test the correct operation of the channels that control the CLS Dennis RGB Wallwasher Use the UP DOWN keys to find the TEST menu Press Enter and hold it down for a few seconds to confirm the choice Use the UP DOWN keys to select the physical channel to be tested ALL SHUTT DIMMR RED GREEN BLUE CTC Press Enter and the selected text will begin to flash running a test routine on the chosen channel Press Enter again to exit the routine being run and choose another channels to be tested Keep Enter pressed down for a few seconds if you wish to exit the TEST menu Head temperature The TEMPERATURE menu is used to view the current temperature of the CLS Dennis RGB Wallwasher s head In some critical heat conditions it is very important to know the temperature of the CLS Dennis RGB Wallwasher as a self protection system of the LED s cuts overall p
15. he SCRUN menu Press Enter and will begin to flash Use the UP DOWN keys to choose ON to enable the scene or OFF if it has not to be run Press Enter to exit the SCRUN menu and confirm Repeat the above steps to program other scenes on the CLS Dennis RGB Wallwasher Once programming is finished keep Enter pressed down for approx 6 seconds in order to exit the PROGRAMMER menu Step 12 program play To start a program access the PGRUN menu 1 Use the UP DOWN keys to find the PGRUN menu 2 Press Enter and the displayed text will immediately begin to flash 3 Use the UP DOWN keys to choose the required programs from 1 to 5 or OFF to stop playing the current program Press Enter to exit the PGRN menu and confirm 14 wwuw cls led com CLS Dennis RGB Wallwasher THE EVENT SCHEDULER Scheduler is a menu that allows to organize a series of 48 events over a period of a week and which is repeated week after week Each event can control the day and time of the start and finish of one of the ten programs already prepared on board the CLS Dennis RGB Wallwasher in order to automate playback without the need for any external operators ATTENTION BEFORE PROCEEDING WITH THE PROGRAMMING OF THE SCHEDULER IT IS IMPORTANT TO SET THE CURRENT DATE AND TIME SEE CHAP MENU PARAGRAPH DAYS OF THE WEEK AND TIME Step 1 Choosing the event number 1 Use the UP DOWN keys to find the
16. is RGB Wallwasher Enabling Disabling the Scheduler The Scheduler allows to organize and run the fully automatic playback of a series of Events on a weekly basis including the preset programs on the MASTER fixture The Scheduler is enabled as follows Use the UP DOWN keys to find the SCHED menu Press Enter and the displayed text will immediately begin to flash Use the UP DOWN keys to choose ON or OFF status Press Enter to exit the SCHED menu and confirm Internal program playback Each fixture can be programmed with 5 Programs of 10 scenes each The programs are enabled using the PGRUN menu Use the UP DOWN keys to find the PGRUN menu Press Enter and the displayed text will immediately begin to flash Use the UP DOWN keys to choose the required programs from 1 to 5 or OFF to stop the playback of a current program Press Enter to exit the PGRUN menu and confirm 5 STAND ALONE PROGRAMMING Programming CLS Dennis RGB Wallwasher Make certain that the fixture is not receiving a DMX 512 signal and configure CLS Dennis RGB Wallwasher as a MASTER see Master Configuration in the previous chapter Follow the steps as described for the programming Step 1 Choosing the program number Use the UP DOWN keys to find the PGSET menu Press Enter for a few seconds until the following appears PROG If it is necessary to create a program other than number 1 press Enter
17. nd ground fault protection e Refer all service to a qualified technician Protection from burns and fire e Provide a clearance of at least 50mm around the unit Do not install the CLS Dennis RGB Wallwasher near a heat source e Do not install the CLS Dennis RGB Wallwasher in a corrosive flammable or explosive area H e Do not modify the CLS Dennis RGB Wallwasher or install other than genuine parts C LS De nnis RG B e Do not operate the unit if the ambient temperature exceeds 50 C Wallwasher e Well ventilated area Protection from injury due to falls e Verify that all covers and mounting hardware is securely fastened e Block access below the work area whenever installing or removing the unit version 1 3 May 08 g Creative Lighting Solutions www cls led com Creative Lighting Solutions wwiw cis led com CLS Dennis RGB Wallwasher Main Features LED s CLS Dennis RGB Wallwasher uses three types of Luxeon LED s Red Green and Blue e 7 Blue Luxeon III LED s e 18 Green Luxeon III LED s e 24 Red Luxeon LED s Lenses Each Luxeon LED is fitted with a 25 high efficiency lens Functions e RGB colour mixing e Linear dimmer e Adjustable strobe effects e Preset on Macro colour and rainbow effects e Settings via on board microcomputer viewable on the unit s display e Display flip function rotates text 180 e Adjustable display brightness e Elapsed time meter for each colour channel Red Green
18. nutes Use the UP DOWN keys to choose the minutes when the program has to start from 0 to 59 Press Enter to exit the START menu and confirm g Creative Lighting Solutions 15 Step 5 End time END TIME is used to configure the hour minutes and seconds in which an event containing a previously prepared program will end Use the UP key to select the END menu Press Enter and will begin to flash Use the UP DOWN keys to choose the hour at which the program has to end from 0 to 23 Press Enter to select the minutes Use the UP DOWN keys to choose the minutes at which the program has to end from 0 to 59 Press Enter to exit the END menu and confirm Step 6 Enabling an event 1 Use the UP key to select the ENABLE menu 2 Press Enter and will begin to flash 3 Use the UP DOWN keys to choose ON to enable the event or OFF if it is to be disabled 4 Press Enter to exit the ENABLE menu and confirm Repeat the above steps to program other events on the CLS Dennis RGB Wallwasher Once programming is finished keep Enter pressed down for approx 6 seconds in order to exit the SCHEDL menu Step 7 Enabling the scheduler To start the scheduler and all its Actions it is necessary to enter the SCHED menu 1 Use the UP DOWN keys to find the SCHED menu 2 Press Enter and will immediately begin to flash 3
19. ower when CLS Dennis RGB Wallwasher is required to work at excessively high temperatures Use the UP DOWN keys to find the TEMPE menu Press Enter and the current temperature will be immediately displayed Using the UP DOWN keys it s possible to display the temperature in degrees Centigrade or Fahrenheit Press Enter to exit the TEMPE menu Configuring a Master When a system with several interconnected fixtures has to be used in Stand alone mode there has to be one MASTER fixture able to control the other fixtures via appropriate on board programming Use the UP DOWN keys to find the MASTR menu Press Enter and the displayed text will immediately begin to flash Use the UP DOWN keys to choose ON or OFF status Press Enter to exit the MASTER menu Configuring Slaves When a system with several interconnected fixtures has to be used in Stand alone mode there has to be one MASTER fixture whereas each of the fixtures controlled by it must be individually configured with its own SLAVE number In the event of the same ID being used for several fixtures they will not be able to be controlled individually by the MASTER program Use the UP DOWN keys to find the SLAVID menu Press Enter and the displayed text will immediately begin to flash Use the UP DOWN keys to choose the required ID from 1 to 29 Press Enter to exit the SLAVEID menu and confirm 10 wuww cls led com CLS Denn
20. required start channel Press Enter to confirm the choice Colour Balance This menu gives access to the setting of CLS Dennis RGB Wallwasher s white balance If its necessary to work with a fixed colour temperature this menu must be used 1 Use the UP DOWN keys to find the BALANC menu Press Enter for approx 6 seconds 3 RbInc will appear on the display and the CLS Dennis RGB Wallwasher will switch on at the old white balance values Press Enter again and will begin to flash Use the UP DOWN keys to adjust the new maximum value required for the Red channel Press Enter to confirm the choice Use the UP key to select Gbinc Press Enter again and will begin to flash Use the UP DOWN keys to adjust the new maximum value required for the Green channel Press Enter to confirm the choice Use the UP key to select Bblnc Press Enter again and will begin to flash Use the UP DOWN keys to adjust the new maximum value required for the Blue channel Press Enter to confirm the choice Press Enter for approx 6 seconds to exit the BALANC menu Pese Lighting Solutions 7 Elapsed time meter This menu gives access to the display of running time of the single channels Red Green and Blue It is also possible to reset the elapsed time meter when the LED matrix is replaced The L_h menu gives access to th
Download Pdf Manuals
Related Search