Home

Product Manual - Field Environmental Instruments, Inc.

1. When a client device connects to the Serial Port service provided by the GeoExplorer 6000 series handheld applications on the handheld can use the pre defined host serial port on COM9 to provide host services to the client device For example to provide GNSS positions from the integrated GNSS receiver to another device use the GNSS Connector software to redirect the NMEA output to COM9 Setting up a Bluetooth connection To use another Bluetooth enabled device with the GeoExplorer 6000 series handheld you must form a Bluetooth connection between the two devices during which you select the type of service to use for the connection This defines how the devices will communicate with each other After forming the Bluetooth connection between the devices you may need to configure settings for the connection such as the COM port for the field software to use or the number for the phone to dial You must then connect to the other device using the appropriate software application To connect the GeoExplorer 6000 series handheld to another Bluetooth enabled device you can use either a paired connection or a non paired connection Note If you are connecting to a phone skip this section and go to Connecting to a Bluetooth enabled phone for Internet access or real time corrections including VRS networks on page 99 where the pairing step is described as part of the procedure for connecting to a phone Trimble recommends using a paired conn
2. Internet Explorer Browse the World Wide Web hed Email Write send and receive email messages 2 Messenger Send instant messages using Windows Live Messenger E Notes Create handwritten typed or recorded notes id Office Mobile 2010 Provides access to these Office Mobile applications Excel Mobile 2010 PowerPoint Mobile 2010 OneNote Mobile 2010 SharePoint WorkSpace Mobile 2010 and Word Mobile Esl Pictures and Videos Take view and edit pictures or record and launch video clips Search Device Search for a file or item stored on the handheld p Tasks Keep track of your tasks Text Send receive and organize text messages Pg Windows Live Access Windows Live services including email instant messenger and Internet search Windows Media Play Windows Media or MP3 audio and video files GeoExplorer 6000 Series User Guide 45 3 Using the Windows Mobile Operating System Interacting with the handheld To interact with the handheld use the stylus or your finger to tap items on the touch screen or to scroll up or down Action Definition Tap Touch the screen once to open items and select options Tap and hold Tap and hold the stylus on an item to see a list of actions available for that item On the pop up menu that appears tap the action you want to perform Drag Hold the stylus on the screen and drag across the screen to select text and images Drag in a list to select multiple items Flick Flick
3. This chapter describes how to enable the wireless radios and the main connectivity options available Use the table on page 87 to identify the wireless connection type you want to make and then follow the steps provided to connect to that device GeoExplorer 6000 Series User Guide 83 6 Getting Connected Wireless connection information The GeoExplorer 6000 series handheld has an integrated Wi Fi radio compliant with IEEE 802 11 b g and an integrated Bluetooth radio 3 5G editions are also equipped with an integrated cellular modem The handheld is shipped with Wi Fi and Bluetooth wireless technology activated To use Wi Fi the Bluetooth radio or the cellular modem you need to turn it on see Turning on and turning off the integrated radios below Note You may need to deactivate the Wi Fi and or Bluetooth radio in the handheld see below if the country in which you are working does not approve the use of Wi Fi and or Bluetooth wireless technology Using a data connection from your local cellular provider the GeoExplorer 6000 series handheld s integrated cellular modem can be used to connect to the Internet to receive real time corrections from a VRS network send and receive messages including email SMS or instant messages or to send and receive files and other data to and from the office directly in the field You can also use the handheld s integrated Wi Fi radio to connect to the Internet or a corporate network using
4. lt External Power gt Brightn Turn off backlight if device is not used for 10 min v Turn on backlight when a button is pressed or the screen is tapped Adjust power settings to conserve power Backlight T e Y K T 3 40 External lt Brightness gt Battery P Auto Brightness Auto Brightness automatically adjusts the display backlight to suit the current light level Auto Brightness Brightness Level Drag the slider to set your preferred brightness level o e eae Adjust power settings to conserve power a Using the Windows Mobile Operating System 3 Messaging Use Messaging to send and receive email messages using the GeoExplorer 6000 series handheld Messaging is the equivalent of your email Inbox To use email you can do one of the following e Synchronize email messages with Microsoft Exchange or Microsoft Outlook on an office computer e Send and receive email messages by connecting directly to an email server through an ISP or a network Synchronizing email messages A You can synchronize email messages on the handheld and the computer CAUTION When you delete a message on the handheld it is deleted from the office computer the next time you synchronize the devices To synchronize email you must enable Inbox synchronization in the Microsoft ActiveSync technology for Windows XP or the WMDC for Windows Vista or Windows 7 For more information ref
5. 5 Using the GNSS Receiver getting signals from but is not using because the signals are too weak In the example shown here eight satellites are being tracked and seven of these satellites are being used to compute GNSS positions Note Numbers with no box represent satellites that are available but that the TerraSync software is not receiving signals from Satellites that have an R prefix are GLONASS satellites GLONASS satellites appear only if the receiver has the Trimble Floodlight satellite shadow reduction technology option activated For more information see Activating GNSS receiver option upgrades Your current GNSS position is displayed at the bottom of the screen Tip For detailed information on satellite positions and signal strengths use the Satellite information screen in the Status section Resetting the GNSS receiver Trimble GNSS field applications all have options to reset the receiver to e delete the almanac e delete information stored on the last known position e restart the receiver e reset the GNSS receiver to factory default settings Improving GNSS productivity using Floodlight satellite shadow reduction technology The productivity of high accuracy GNSS receivers can be affected by satellite shadow Satellite shadow occurs when the line of sight between a GNSS receiver and GNSS satellites is partially or fully blocked by obstructions such as buildings trees or even the landscape itself The
6. d When prompted by the phone enter the same password and then accept the connection e On the GeoExplorer 6000 series handheld tap Advanced to open the Partnership Settings screen Make sure that Dialup Networking DUN is selected and then tap Save You have now created a partnership between the GeoExplorer 6000 series handheld and the phone so that they can communicate 7 From the My Connections list select the phone that you want to configure the connection to 8 Enter the GPRS access number for the Internet Two of the common GPRS access numbers for cellular phones on GSM networks are 99 1 and 99 If these access numbers do not work contact the cellular phone provider to obtain the appropriate number to use Note You do not need to set up dialling rules or change the Internet connection settings on the phone The connection settings you enter on the handheld are passed to the phone to use for this connection 9 Tap Next 100 GeoExplorer 6000 Series User Guide Getting Connected 6 10 Unless the phone provider confirmed that you must enter user name password and domain settings to access the Internet tap Finish without entering any information in this screen Otherwise a Enter the required information b Ifthe phone provider has told you that you need to change the baud rate or other settings for the connection tap Advanced configure these settings and then tap OK c Tap Finish You are returne
7. Table 7 1 Mode Still amp Video Video Video Still Still amp Video Still amp Video Still Still Still Still amp Video Still amp Video default setting Camera settings Setting Brightness Audio Resolution Resolution Compression White Balance DateStamp Location Zoom Full Screen Options Options 3 2 1 0 1 2 3 On Off 640x480 320x240 176x144 SMP 3 2MP 2MP 1 3MP 640x480 320x240 Low quality Medium quality High quality Automatic Incandescent Sunlight Fluorescent On Off Off no Geotagging EXIF Geotag in EXIF header of the file WaterMark Geotag on image EXIF WaterMark both Varies according to resolution Hides the tile bar Launches Camera and Video options Note The larger the resolution the larger the file size Taking a photo with a larger resolution may take longer to capture continue to hold the camera still until you see the photo review image in Still mode or until the preview screen reappears in Video mode GeoExplorer 6000 Series User Guide 121 7 Using the Camera Camera and Video options To access the Camera options tap Pictures amp Videos Camera Menu Options Use the camera options to customize where still photos and videos are stored and to customize storage settings for still photos e Save files to Ifyou have a storage card installed you can choose to save photos in either the main memory of the device or
8. copy paste and delete files and folders on the handheld Note You cannot transfer files between two GeoExplorer 6000 series handhelds as the client file transfer profile is not supported The handheld supports file transfers as a host device only To transfer files between handhelds you can beam them see page 114 To provide a host service you must turn on the Bluetooth radio and make both devices visible to other devices see page 84 and page 86 Figure 2 shows different client devices connecting to the handheld using Bluetooth wireless technology Figure 2 GeoExplorer 6000 series handheld Bluetooth host connections 94 GeoExplorer 6000 Series User Guide Getting Connected 6 In Figure 6 2 the dashed arrows indicate the client devices for example the laptop or PDA connecting to the GeoExplorer 6000 series handheld which is the host device The Bluetooth profile or service used for the connection is shown between the arrows for example the Serial Port service is used when outputting GPS data from the handheld to another device The solid arrows indicate the flow of information between devices The GeoExplorer 6000 series handheld can output GNSS data to client devices that connect to the handheld using a Bluetooth serial port When a laptop computer or office computer connects to the GeoExplorer 6000 series handheld and selects the File Transfer service files and information can be exchanged to and from either device
9. copy has been licensed for installation on multiple Devices NO REPRESENTATION OR WARRANTY IS MADE BY TRIMBLE OR MICROSOFT WITH RESPECT TO THE COMPATIBILITY OF THIS SOFTWARE WITH ANY DEVICE OR ANY OTHER EXISTING SOFTWARE OR DATA OF ANY KIND CONTAINED ON SUCH DEVICES AND NEITHER TRIMBLE OR MICROSOFT SHALL BE RESPONSIBLE IN ANY REGARD WITH RESPECT TO ANY LOSS CORRUPTION MODIFICATION OR INACCESSIBILITY OF ANY DATA APPLICATIONS OR OTHER SOFTWARE RESULTING FROM THE INSTALLATION OF THE SOFTWARE ON ANY DEVICE 1 8 Internet Based Services Components Microsoft provides Internet based services with the software Microsoft may change or cancel them at any time The Microsoft Software features described below connect to Microsoft or service provider computer systems over the Internet In some cases you will not receive a separate notice when they connect You may switch off some of these features or not use them For more information about these features visit http go microsoft com fwlink LinkId 81931 By using these features you consent to the transmission of this information Microsoft does not use the information to identify or contact you You may not use these services in any way that could harm them or impair anyone elses use of them You may not use the services to try to gain unauthorized access to any service data account or network by any means 1 9 Device Information The following features use Internet protocols which send to the
10. photo mode 3 Do one of the following d To capture a photo Hold the handheld steady Use the preview window to frame the subject in the centre of the frame To focus press the Camera button down and hold Focus and exposure are set and locked while the camera button is held in this position To capture the photo release the Camera button and hold the camera steady until the review photo is shown To capture a video Tap the menu Menu button and then select Video 120 GeoExplorer 6000 Series User Guide Using the Camera 7 Use the preview window to frame the start of the video To start recording press the Camera button and then release Move the handheld to record the video To pause recording tap the Pause button To stop recording tap the Stop button or press the Camera button Note When the camera application displays the LS icon it is storing the photo or video file Removing the battery or the memory card while recording may affect photos videos or damage the memory card To switch to Still mode from Video mode tap the menu Menu button and then select Still Adjusting camera settings To access the camera settings E Start the camera application and then tap the Menu button The available camera settings are displayed in a list Tap the required setting or change the current value The list of available settings varies depending on whether you are in Video mode or Still mode
11. recognize ports if they are added after the application opens The Bluetooth device has moved out of range The Bluetooth radio has lost the connection Bluetooth file transfer interrupts the connection The integrated Bluetooth radio may have been deactivated Solution The handheld s Bluetooth radio has been deactivated If Bluetooth wireless technology is allowed where you are working use the Radio Activation Manager software to re activate the radio see Deactivating the integrated Wi Fi and Bluetooth radios page 9 Move the devices closer to each other and then scan again Make sure that the Bluetooth radio is turned on on both the handheld see page 86 and the other Bluetooth device Make sure that the Bluetooth device has been made Discoverable Exit from the application add the port and then run the application again Move the devices closer to each other The devices should reconnect automatically If they do not select the Bluetooth device in the Devices tab Tap and hold the device name and then select Delete Tap New to discover the device again Turn off the Bluetooth radio on the handheld and then turn on the Bluetooth radio see page 86 When you transfer large image or data files other Bluetooth connections may stop responding To avoid problems close other Bluetooth connections before transferring large files Use the Radio Activation Manager to reactivate the Bluetooth radio
12. 2 Plug the null modem cable into the serial COM port on the USB to serial converter 3 Connect the other end of the cable to the serial port on the external device GeoExplorer 6000 Series User Guide 117 6 Getting Connected To connect to a serial device that does not have a standard 9 pin serial port use a cable that has a DEY connector on one end and the appropriate connector for the other device on the other end A suitable cable may be supplied with the external device 118 GeoExplorer 6000 Series User Guide CHAPTER Using the Camera In this chapter The GeoExplorer 6000 series handheld contains an integrated digital camera to capture photos or Parts of the camera deo m Starting the camera application and capturing photos or video m Adjusting camera settings GeoExplorer 6000 Series User Guide 119 7 Using the Camera Parts of the camera Camera Lens Camera button Figure 7 1 GeoExplorer 6000 series camera controls Use the Camera button to e Start the camera application e Lock focus press and hold the button e Capture photos release the button e Start and stop recording a video in Video mode press the button Starting the camera application and capturing photos or video To start the camera do one of the following 1 Press the Camera button in the center of the keypad 2 Tap Pictures amp Videos Camera When the camera application is started it is by default in Still
13. 66 for details 2 Inthe GNSS Connector software manually redirect the real time correction source to COM4 by tapping Setup then select the real time source from the drop down list Note You must first install the GNSS Connector software See GNSS Connector software page 67 for details 3 Configure your data collection software to monitor and use real time corrections as required Note To receive real time corrections the GNSS Connector software must remain running on the handheld Using Smart Settings Note Trimble recommends that you use accuracy based logging see Accuracy settings and using accuracy based logging page 72 and Smart Settings to control the quality of the GNSS positions logged and let the TerraSync software manage the logging of positions based on your required accuracy Using Smart Settings the GNSS receiver generates the best possible position for any given environment without the need for you to adjust receiver settings to match the conditions Regardless of whether you are working under canopy in wide open spaces or somewhere in between Smart Settings automatically generates the best solution possible Using traditional mask techniques in open conditions weak signals can accidentally degrade the accuracy of the position if masks are too relaxed whereas in obstructed conditions more satellites are needed to help maintain optimum accuracy if masks are set too strictly Using Smart Settings the r
14. Guide 13 DION IOC CAG a aed agi anee Rete nats eee eee Goa eee eee eae eaee eee 36 Installing and removing a SIM card 42 24 0 ohe54 4 OEE RREE EE HERES CREE EOE 38 Mitine he Wand sid e aaeeea Gotan oe oe eae eee hee eee e eee ee ee eae ees 39 3 Using the Windows Mobile Operating System 41 Parts ol tle SClCen se rsra Aa eager da wae hae eee Oe eae ee eee hoe ee eee a 42 aS TACOS sesapa a E a BS a E E a eee E 43 Battery status indicators oe hee aaa eee eee bee e see 43 Sp aker Slavs INCICALOIS sss ose earme toed eae e bat Goe8 464 44446 oH e 43 Network and modem status indicators 2 20 eee eee ee 44 Pre ietalied programi aa 500 42k RG REO he eRe Ee Rhee eee eee eee eases d 45 Interacting with the handheld 54645504945 4 465 4545 ROR Ee ESS EEE RE REE Ss 46 Entering miormaliolik ee a4 225g da ee knee oe ees Bee eee 8 es 47 Using the on screen Keyo0dId 4 5242254 begebe86 one bh ties gd ds ahah eee 47 Making a recOrdiho gece eeeet Gn beeee Se eakAes ake Gea sha ee 65 2 48 Personalizing the handheld 62028 o4h eee bd ode ee Ew Oe ES ES AER OE ESE EDA 49 DUON a a ak eA ou eh es Gi Se cee eG eae an ee ae ee oe a ee 49 HOM aktee ens eee OARS OHH SER ORES ER SME EEE A LAGS RO OE ER AER SES 50 DEC o eeeeaeae hate og thee eee eee hoe dae eee ey eee Ge 51 POR Te eae e eE eee E e E a eee 52 Sounds and notifications aeaa G Oe ERSE SEEGERS eR ON ES 52 DClCCU eats eb e eyes een ease eee Eee eee ee eae ee
15. Host name IP 2 From the My Work Network list tap Add a new VPN server connection VPN type eee 3 Follow the instructions in the Make New O perp Connection wizard 4 Tap Finish GeoExplorer 6000 Series User Guide 115 6 Getting Connected Step 3 Connecting to the corporate network or Intranet To connect to the corporate network or Intranet simply start using Internet Explorer The Windows Mobile operating system automatically controls whether the VPN connection is used depending on whether the URL contains a period For example the URL www trimble com contains periods and so the connection to this web site is made without using the VPN connection However an address to a network computer or file server that does not contain periods automatically starts the VPN connection If you need to use the VPN connection to access URL addresses that contain periods specify exceptions for the addresses that are within the corporate network To do this l Tap amp Settings Connections Connections 2 Tap the Advanced tab 3 Tap Exceptions The Work URL Exceptions screen RTT ewer oe i intranet ores enter the Us here so ou can connect to those sites 4 Tap Add new URL URL exceptions 5 Enter the URL and then tap OK Add new URL 6 Repeat Step 4 and Step 5 as required 7 Tap OK to return to the Advanced tab of the Connections screen 8 Tap OK to close the Connections screen 9 Tap to close th
16. Next until you reach the last page of the wizard From the Message download limit drop down list select Entire message When you connect the handheld to the email server new messages are downloaded to the Messaging folder messages in the Outbox folder are sent and messages that have been deleted on the email server are removed from the Messaging folder 56 GeoExplorer 6000 Series User Guide Using the Windows Mobile Operating System 3 Messages received directly from an email server are linked to the email server rather than an office computer When you delete a message on the handheld it is also deleted from the email server the next time you connect the handheld to the email server You can work online or offline When working online you read and respond to messages while connected to the email server Messages are sent as soon as you tap Send which saves space on the handheld When working offline you can disconnect from the email server after you download new message headers or partial messages and then decide which messages to download completely The next time you connect Messaging downloads the complete messages you have marked for retrieval and sends any messages that you have written GeoExplorer 6000 Series User Guide 57 3 Using the Windows Mobile Operating System 58 GeoExplorer 6000 Series User Guide CHAPTER Connecting to an Office Computer In this chapter Connection management software Connecting the
17. Product Limited Warranty Subject to the terms and conditions set forth herein Trimble Navigation Limited Trimble warrants that for a period of 1 year from date of purchase this Trimble product the Product will substantially conform to Trimble s publicly available specifications for the Product and that the hardware and any storage media components of the Product will be substantially free from defects in materials and workmanship Product Software Product software whether built into hardware circuitry as firmware provided as a standalone computer software product embedded in flash memory or stored on magnetic or other media is licensed solely for use with or as an integral part of the Product and is not sold The terms of the end user license agreement as included below govern the use of the Product Software including any differing limited warranty terms exclusions and limitations which shall control over the terms and conditions set forth in the limited Product warranty Warranty Remedies Ifthe Trimble Product fails during the warranty period for reasons covered by this limited warranty and you notify Trimble of such failure during the warranty period Trimble will repair OR replace the nonconforming Product with new equivalent to new or reconditioned parts or Product OR refund the Product purchase price paid by you at Trimbles option upon your return of the Product in accordance with Trimble s product re
18. Then open the Bluetooth control on the handheld In the Devices tab tap the partnership and in the services list make sure that the ActiveSync check box is selected The connection is not On the handheld tap E ActiveSync Menu enabled in ActiveSync onthe Connections Make sure that the Synchronize all PCs using handheld this connection check box is selected and that the correct option is selected The handheld connection If you are using a USB cable use the USB to PC utility to settings conflict with change the connection method the handheld uses to network settings or VPN connect to ActiveSync on the computer Tap Settings client software Connections USB to PC Utility Clear the Enable advanced network functionality check box The handheld stops using the default RNDIS method to connect to the ActiveSync technology 128 GeoExplorer 6000 Series User Guide Troubleshooting 8 Bluetooth wireless technology Problem The handheld cannot discover a nearby Bluetooth device The COM port that you assigned to a serial port service is not available in your application The Bluetooth connection fails while in use An error message reports Problem with Bluetooth Hardware Cause The integrated Bluetooth radio is not activated The device is out of range Bluetooth wireless technology is not enabled on one or both devices The device has not been made Discoverable The application cannot
19. Trimble recommends charging the battery for five hours to recharge it fully Charging the battery Charge the battery in the handheld or if you have a spare battery you can charge it outside the handheld To charge the battery 1 Connect one end of the AC adaptor cable to the battery and the other to an AC power outlet An international adaptor kit is provided with the handheld 2 Turn off the handheld or put the handheld in Suspend mode see page 32 Note Trimble recommends that you charge the handheld at or below normal room temperature 0 to 30 C 32 to 86 F 3 Leave the battery to charge It may take up to five hours for the handheld to charge completely When the handheld is charging the Power LED on the handheld is solid orange If the Power LED changes to red a battery charging fault has occured For more information see page 29 When fully charged the Power LED is green 28 GeoExplorer 6000 Series User Guide Getting Started 2 The Power LED on the keypad on the handheld indicates the battery power or charging status as shown below Power source ga LED state Handheld battery state Battery power Off Handheld is turned off or is in Suspend mode Off Handheld is turned on and battery level is good Y aD Flashing red Handheld is turned on and battery level is critically low lt 5 External power Solid orange Battery is charging m Solid red Charging fault for example there is a pr
20. User Guide CHAPTER Using the GNSS Receiver In this chapter m Supported GNSS field software m Configuring the GNSS field software to connect to the receiver Using the GNSS field software Improving GNSS productivity using Floodlight satellite shadow reduction technology m Ensuring the accuracy of your GNSS data m Activating GNSS receiver option upgrades Differential GNSS explained m Outputting NMEA data to external equipment m Configuring NMEA output The GeoExplorer 6000 series handheld includes an integrated GNSS receiver that enables you to collect GPS and GLONASS data for incorporating into a GIS or for managing assets GPS Global Positioning System and GLONASS GLObal NAvigation Satellite System are Global Navigation Satellite Systems GNSS Each system consists of a constellation of satellites that orbit the earth GNSS provides worldwide all weather 24 hour time and position information Note To receive signals from GPS or GLONASS satellites the handheld must have a clear view of the sky GPS or GLONASS positions may not always be available particularly in or near buildings in vehicles or under tree canopy With the addition of the Trimble Floodlight satellite shadow reduction technology option the GeoExplorer 6000 series handhelds integrated GNSS receiver can improve accuracy and productivity in difficult environments Note To track GLONASS satellites you must have the Trimble F
21. another device page 114 Wi Fi Bluetooth wireless Access a corporate network through your page 115 technology or cellular modem Internet connection GeoExplorer 6000 Series User Guide 87 6 Getting Connected Connecting to a cellular network from the modem If your handheld is fitted with the optional cellular modem use it to establish a connection to a cellular network Use this type of connection to browse the Internet or an Intranet and send and receive data for example to obtain real time corrections from a VRS network send and receive messages for example email instant messages or SMS messages or access files on a corporate network Note The GeoExplorer 6000 series cellular modem can only be used to send and receive data or text SMS messages It does not support voice call functionality or sending and receiving MMS messages Trimble recommends that you request a data only plan from your cellular service provider and have a voice restriction placed on your line To connect to a cellular network 1 Configure the connection to the network This can be Automatic or Manual 2 Connect to the cellular network Before you begin the steps below Trimble recommends that you e make sure that a SIM card is inserted in the handheld See Installing and removing a SIM card page 38 e confirm that the modem can access the Internet directly If necessary contact your service provider and confirm whether you must enter a
22. appropriate systems device information such as your Internet protocol address the type of operating system browser and name and version of the Software you are using and the language code of the Device where you installed the Software Microsoft uses this information to make the Internet based services available to you a Update Features Windows Mobile Update feature provides you the ability to obtain and install Software updates on your Device if updates are available You may choose not to use this feature Trimble and or your Mobile Operator may not support this feature or an update for your device b Security Updates Digital Rights Management Content owners use Windows Media digital rights management technology WMDRM to protect their intellectual property including copyrights This software and third party software use WMDRM to play and copy WMDRM protected content If the software fails to protect the content content owners may ask Microsoft to revoke the software s ability to use WMDRM to play or copy protected content Revocation does not affect other content When you download licenses for protected content you agree that Microsoft may include a revocation list with the licenses Content owners may require you to upgrade WMDRM to access their content Microsoft software that includes WMDRM will ask for your consent prior to the upgrade If you decline an upgrade you will not be able to access content that requires the upgrade 1
23. certain that the storage card slot door is attached correctly when you are using the handheld outdoors When inserting or removing a storage card place the handheld on a dust free indoor surface 12 GeoExplorer 6000 Series User Guide Contents Safety Information 0 ee nnne 9 RAG Uses toe ieee eee oA Ghee eee ed bo Gee bee Lee ee ee oe eee 9 Deactivating the integrated Wi Fi and Bluetooth radios 9 Exposure to radio frequency radiation from Bluetooth and Wi Fi transmitters 10 Exposure to radio frequency radiation from cellular wireless transmitters 10 WC AGAOtOl n au nee eee Ree eee eee eee eee pee eee eee ee Ae ee ee ees 10 Plectrostatie CISCNdl ec p22 64 Cea Se G5 ee BRE eee bed Hee eh Eee aoe es 11 Battery saleby c ascoeds 44 s Be oe Sa bo eee ee ee Shoe Oe ee ee ong yea ee eo oa 11 DEOIAC CAN UGes 6c a tay het ee ee eee oe ote eee eae eos eS 12 1 QHIOCUCHION cat cede ee CHR datt HER EMO eS 17 About the GeoExplorer 6000 series handheld 0 0 2 eee eee eee 18 Supported GNSS field software 2 0 ee 18 Whats Ute DOK g4 2 ea eee be ego eo oe Pee ee ee teeta eee lan cen cues 19 PCO Ol ct ee ee eee ee ee 19 Useand care ofthe handheld sas as 6a eg tad Chae 4S SF he Gee ee E a 20 Oa Ne MANGNCIE ote ee tae 6 ote oe oe gee eh eee ee oe ee eee 20 Ale clavauler leer lols 6 0 6 ee a ee er ee ee ee 21 FCCOMCALGUDOOU 4642660 dee ys teeahdeces panda dae Seeedestaeedcs
24. close the Connections Tasks screen 8 Tap to close the Connections screen GeoExplorer 6000 Series User Guide 101 6 Getting Connected To check the connection status at any time tap the title bar and then tap the required status icon on the pull down list To end the connection at any time tap the title bar tap the required status icon on the pull down list and then tap Disconnect To connect to a corporate network or Intranet see page 115 To send and receive email messages see Messaging page 55 Step 3 Configuring the GNSS field software to use data received from the Internet source Now that you have connected the GeoExplorer 6000 series handheld to the Internet you must configure the software to use the connection to receive data To use real time corrections in Trimble field software see Using real time corrections from the Internet below To use background map data in the TerraSync software see Downloading background map files from an Internet map server page 103 Using real time corrections from the Internet 1 Start the Trimble GNSS field software and then open the Setup section 2 Tap Real time Settings The Real time Settings form appears 3 From the Choice 1 field select External Source 4 Configure the external source a Tap the Setup button beside the Choice l poe 2 field The External Source Settings form appears SS External Source Settings b From the Correction Datum fi
25. computer To avoid accidentally synchronizing the handheld with a large amount of data on the office computer Trimble recommends that you either connect to the handheld without forming a partnership or that you limit the information types and amount of data that is synchronized A N CAUTION Synchronizing data is designed to keep the same data on both the office computer and the handheld Exercise care when resynchronizing applications after deleting data from one computer as resynchronizing will delete the same information from the other computer For more information see one of the following e Managing the connection using the Windows Mobile Device Center page 61 e Managing the connection using ActiveSync technology page 63 Installing the Windows Mobile Device Center The Windows 7 and the Windows Vista operating system include a basic connectivity driver for devices powered by a Windows Mobile operating system This driver allows you to transfer files from the handheld to an office computer To install software onto a device powered by a Windows Mobile operating system you must install Windows Mobile Device Center 6 1 onto an office computer A copy of the Windows Mobile Device Center is provided on the GeoExplorer 6000 Series Getting Started Disc Alternatively go to www microsoft com windowsmobile devicecenter mspx to download the latest version from the Microsoft website 60 GeoExplorer 6000 Series User Guide Connecti
26. device page 92 or Connecting to a Bluetooth enabled phone for Internet access or real time corrections including VRS networks page 99 If you need to connect to different mailboxes set up and name a different service for each connection Note The Messaging software supports only the POP3 and IMAP4 protocols for incoming mail and SMTP for outgoing mail To set up a mail service Messaging 1 Tap E mail E mail address 3 Enter the email address for your account Password 4 Enter a password Select Save password if you want fF the device to remember your password Save password afale 3 4 5J6 7 Js JoJo j l apex rapt awh el ol Lvl ol ol ef OL CAP af staf I o nf it kt A 6 To automatically get connection settings for your soft Df old nfo J al AT email account from the Internet select the check box OD 7 Tap Next 8 Follow the steps in the Setup wizard If the connection settings are not automatically downloaded from the Internet you must enter them using the connection details supplied by your ISP or network administrator Note You cannot change the account name later 9 Tap Finish 10 Tap OK to download mail immediately X Tip To receive TerraSync data files by email edit the settings for the email account you have set up To do this tap Menu and then select Options In the Accounts tab tap the e mail account you want to use to receive TerraSync files The Email Setup wizard appears Tap
27. ee ee oo ee 53 BaCKWIChOs geeea chet eee oan sees eee cawe eee ee eee ene ewe eee ae 53 ME teen e psa PCR Stee G EY Ake GSAS ee ee eee ee ee SG eee G 55 Synchronizing email messages 2 42 eht4eeeee hes pad eeeeeeeas o aa ueanc 55 Connecting directly to an email server 22s ceeusseaw bende Seuege ede eaed 56 4 Connecting to an Office Computer 0 anann 59 Connection management software saaa ee 60 Installing the Windows Mobile Device Center 0000 ee 60 Installing ActiveSync technology nsan she See eG RaW eh eee eo ESR ERLE OS 61 Connecting the handheld toacomputer 0 0 eee eee eee 61 Managing the connection using the Windows Mobile Device Center 61 Managing the connection using ActiveSync technology 000 00 ee ee 63 Installing software onto the handheld 0 0 eee eee ee eee 64 5 Using the GNSS Receiver 2 02 eee 65 Supported GNSS field software 2 0 ee eee 66 TeraSyne SON Wale 4 ou 444 oes oe Gee aes bee oe ee ee oe Oe ee 66 Esri ArcPad software and the Trimble GPScorrect extension 66 GPS Controller SoftWare i eo ce Gn Oe ea ue eae hh eee So Ge OES eo eee 66 GNSS Connector software saasaa ee 67 Other GNSS field applications 2 0 aa ee eee 67 Configuring the GNSS field software to connect to the receiver 0 0 67 GNSS COMPO e 246 eo wee Me ee eee Ce ee ee ee ee 67 14 GeoExplorer 6000 Series User Guid
28. eh istit oa eee oa ee eee hee ae 82 Getting Connected 0 83 Wireless connection information 66 Gu Hehe Shee SUE ARES oS eS Re Es 84 Deactivating the integrated radios 1 2 ee 84 Turning on and turning off the integrated radios 0 000008 84 Connecting wirelessly to other devices and networks 04 86 Connecting to a cellular network from the modem 000002 eee 88 Connecting toa WI FI ACCESS POINbe e445 seiat oa be deb ed be ee he ee dG Rages 90 Connecting to a Bluetooth enabled device 2 0 ee ee ee 92 Connecting to a Bluetooth device as a client 0 0 0 0 00 ee eee 92 Providing Bluetooth services as a host 2 000 eee ee 94 Setting up a Bluetooth connection 2 0 0 eee 95 Connecting to a Bluetooth enabled phone for Internet access or real time corrections including VRS networks 2402444 0n de ehG oR PRESS GREEK EOE ORES 99 Connecting to the Internet through a Bluetooth enabled phone using the Bluetooth PAN DUIS ce ee eee neeeeee ene eee ae aaee be ee eee E eee eens 104 Connecting to a Bluetooth enabled serial device 00020 00 106 Connecting to an office computer using Bluetooth wireless technology 109 Outputting GNSS data to other devices using Bluetooth wireless technology 112 Enabling other devices to transfer files using Bluetooth wireless technology 113 Beaming files to or from another devic
29. handheld to a computer Managing the connection using the Windows Mobile Device Center Managing the connection using ActiveSync technology Installing software onto the handheld Connect the GeoExplorer 6000 series handheld to an office computer to transfer information settings and files from one device to the other or to install software onto the handheld You can connect the handheld to a computer using the USB cable or a Bluetooth wireless link To protect your data Trimble recommends that you regularly copy important data to an office computer GeoExplorer 6000 Series User Guide 59 4 Connecting to an Office Computer Connection management software To install software onto a device powered by the Windows Mobile operating system or to copy files between the handheld and a computer you must connect the device to an office computer If the computer is running e the Windows 7 or Windows Vista operating system use the Windows Mobile Device Center WMDC to manage the connection e the Windows XP or 2000 operating system use ActiveSync technology to manage the connection Note You must install the Windows Mobile Device Center or ActiveSync technology onto the computer before you connect the handheld This connection management software also enables you to synchronize office applications on an office computer with the handheld A N CAUTION The available space on the handheld is small compared to an office
30. icon P Tap the Menu icon Select Draw and then select Draw Use the stylus to write or draw on the screen Making a recording For handheld configurations equipped with an integrated microphone you can create a stand alone voice note or you can add a recording to a note Then you can work with voice notes in the same way that you work with notes To make a recording l 2 ol Tap and then tap the Notes icon Tap the Menu icon Do one of the following Tocreate a stand alone recording in the screen displaying the list of notes tap the Record button O to begin recording Siet Ril To adda recording to a note create or open a note and then tap the Record button o to begin recording ei A G amp Note For GeoExplorer 6000 series configurations that include an integrated microphone the microphone is on the front of the handheld in the keypad area The microphone will capture voice notes when you are holding the handheld in front of you In noisy environments you may need to move the handheld closer to you or to the source of the sounds you want to record Configurations available for sale in China are not equipped with an integrated microphone 48 GeoExplorer 6000 Series User Guide Using the Windows Mobile Operating System 3 4 When you finish recording tap the Stop button p Ci UAII Folders If you are creating a stand alone recording an I Notet icon appears
31. in the note list iienaa If you are recording in an open note an icon appears in the note Tap OK to return to the note list To play a recording tap the recording in the note list or open the note and then tap the icon in the note 6e Personalizing the handheld Use the controls in the Settings area to customize the handheld The following examples describe controls that are available Buttons Use the Buttons control under Personal settings to assign the action you want to be performed when you press the left or right application key By default these keys perform the same action as the left and right tiles in the tile bar Alternatively program these keys to perform a selected action Application buttons can be programmed to perform one of the following types of actions e Run aselected application for example Messaging or Calendar e Act as a software button for example an OK Close button or a scroll button e View a selected screen or part of a screen for example return to the Home screen or launch the Context menu or Input panel To open the Buttons control e Tap Settings Personal Buttons To specify an action for the button Buttons a YX T 1 30 1 Tap the Program Buttons tab Up Do Program Buttons gt Up Do 1 Select a button 2 Tap a button in the list to select it gnment 3 From the Assign a program drop down list select amp a lt Lett softkey gt the
32. is operated appropriately in a residential or commercial environment GeoExplorer 6000 series handhelds equipped with wireless cellular modem radios are intended for connection to European Networks operating with GSM 900 or GSM 1800 A copy of the CE Declaration of Conformity for the GeoExplorer 6000 series can be accessed from http www trimble com support shtml Australia and New Zealand This product conforms with the regulatory requirements of the Australian Communications Authority ACA EMC and Radiocommunications framework thus satisfying the requirements for C Tick Marking and sale within Australia and New Zealand modem also comply with the requirements for A Tick Marking Additionally GeoExplorer 6000 3 5G products that incorporate a and sale in Australia A 8 GeoExplorer 6000 Series User Guide Taiwan Battery Recycling Requirements The product contains an internal Lithium ion battery RA Taiwanese regulations require that waste batteries are recycled 5 RE ENE ag BL A Japan This device has been granted two designation numbers by Ministry of Internal Affairs and Communications according Ordinance concerning Technical Regulations Conformity Certification etc of T Radio Equipment HE ER OD k tht ES aL AAS IC BS S Al Article 2 clause 1 item 19 Approval nos 202WWSM11568841 and 202WWSM115688411 This device should not be modified otherwise the granted designation numbers will be invalid Korean Com
33. keypad displayed operating system e To connect to the network press the left application button Alternatively select a Windows Mobile application from the Start screen such as the Home screen or File Explorer and the tile bar and soft keys will be displayed correctly Wi Fi is unavailable in The integrated Wi Fi Use the Radio Activation Manager to reactivate the Wi Fi the Wireless Manager radio has been radio see Deactivating the integrated Wi Fi and deactivated Bluetooth radios page 9 Internal cellular modem connections Problem Cause Solution Can t download data Your account has no Contact your cellular provider to ensure that your account remaining credit has sufficient credit Can t connect The phone is turned off Turn on the phone using the Wireless Manager The connection is Check your APN and connection settings with your incorrectly configured provider Cellular service is Check that the phone is within range of receiving strong unavailable enough signals to connect Move to a location with stronger cellular reception Check with your cellular provider that coverage is available in your region Can t set up a SIM card is missing Insert SIM card connection SIM card is locked Check the PIN security tap Settings Personal Phone and select the Security tab 3G GSM selection is Check your settings tap E Settings Personal Phone incorrect for your and select the 3G tab Set the 3G GSM S
34. need to set up the wireless connection manually as described in Step 1 To connect to the network or access point go to Step 2 Connecting to the network or access point Step 1 Setting up the Wi Fi connection 1 Make sure that the GeoExplorer 6000 series handheld s Wi Fi radio is enabled see page 84 2 Tap amp Settings Connections Wireless Manager 3 Tap Menu and then select Wi Fi Settings Wi Fi a X A GH 6 52 Configure Wireless Network 4 To add anew network tap Add New To change aa the settings for an existing network tap the T This is a hidden network network Any networks that you have already configured are displayed in the list of preferred networks C This is a device to device ad hoc connection 5 Enter the name of the network and other connection details and then tap Next 23 WA 213141 5 fe 7 si of of 4 6 Do one of the following To use authentication select the authentication method from the Authentication list To use data encryption select an encryption method from the Data encryption list To automatically use a network key select the check box for The key is automatically provided Otherwise enter the Network key and the Key index 7 Tap Next 8 For increased security select the Use IEEE 802 1x network access control check box and then configure additional authentication information 9 Tap Finish Step 2 Connecting to the network or access poin
35. networks use multiple base stations to calculate the DGNSS corrections that are then delivered to the user from a Geostationary satellite SBAS or from a radio or cellular phone VRS networks Factors that affect real time DGNSS accuracy include how often the corrections are updated how far you are from the base station and whether the coordinate system used by the correction source matches the coordinate system used by the GNSS receiver 80 GeoExplorer 6000 Series User Guide Using the GNSS Receiver 5 Postprocessed DGNSS In postprocessed DGNSS the collected GNSS data is transferred to an office computer and measurements from the base station are downloaded You can postprocess GNSS data collected with Trimble GNSS field software using e the GPS Pathfinder Office software version 5 10 with the latest updates or later e the Trimble GPS Analyst extension for Esri ArcGIS Desktop software version 2 40 with the latest updates or later Typically postprocessed DGNSS uses only one base station However when differentially correcting data collected with GeoXH receivers using H Star technology you can select multiple base stations to correct the file against for improved accuracy Factors that affect the accuracy of postprocessed DGNSS include the type of receiver and antenna used at the base station the distance between the base station and the location where the rover data was collected the accuracy of the base station posit
36. on will make the device reboot when the battery is swapped Do not remove the existing battery until the red LED turns off GeoExplorer 6000 Series User Guide 33 2 Getting Started To turn on the handheld when it is in Swap Battery mode ensure that the battery is correctly installed and then press the Power key The handheld is immediately ready for operation There may be a delay of up to 30 seconds while the integrated GNSS receiver automatically reactivates The wireless radios will not automatically reactivate use the Wireless Manager to manually turn on the wireless radios Resetting the handheld If the screen on the handheld is blank the handheld has turned off Press the Power button to turn on the handheld Ifthe handheld stops responding to the stylus or ifit does not respond when you press any of the keypad buttons you may need to reset it by performing a soft or hard reset You can also reset the handheld to its factory default settings by performing a factory reset Performing a soft reset A soft reset is similar to restarting a computer A soft reset retains all settings and device data that you have previously saved on the handheld The handheld saves any unsaved data closes all open applications and then restarts To perform a soft reset press the Power key for one second until the Power menu appears and then tap the Reset button Performing a hard reset A hard reset retains settings and data t
37. page 61 2 Ifthe Autoplay window appears close the window GeoExplorer 6000 Series User Guide 61 4 Connecting to an Office Computer 3 The Windows Mobile Device Center window displays the message Connected G Windows J ma Mobile obile Device Settings Note Ifthe connection is not made automatically check that the connection is enabled in the Windows Mobile Device Center software and on the handheld For more information see Troubleshooting page 123 4 Do one of the following To synchronize files and data between the handheld and a computer click Set up your device and then follow the instructions on screen To transfer data between the handheld and the computer without synchronizing the devices click Connect without setting up your device To transfer files between the computer and the handheld click File Management A Windows Explorer type window appears displaying files stored on the handheld Copy and paste files to other locations on the computer or from the computer to the handheld To install software onto the handheld see Installing software onto the handheld page 64 To uninstall software from the handheld click Programs and Services and then click Add Remove Programs X Tip If the Add Remove Programs option does not appear below Programs and Services click More The Add Remove Programs option appears For more information refer to the Windows Mobile Device Center
38. see Deactivating the integrated Wi Fi and Bluetooth radios page 9 GeoExplorer 6000 Series User Guide 129 8 Troubleshooting Wi Fi connections Problem Cause Solution The New Network The Wi Fi radio is off Tap the wireless icon in the Home screen or go to the Detected notification Wireless Manager and make sure Wi Fi is on does nse The handheld is out of Move to within range of the network then tap oO AUTOMMAVICANY range of the network Settings Connections Network Cards and then set up the connection The handheld cannot The date on the Check that the handheld has the date set correctly on the connect to a secure site handheld is incorrect Home screen If the date is incorrect tap the clock icon on You cannot configure an the Home screen and then adjust the date and time Internet connection Within range of more The radio is connecting Tap Settings Connections Network Cards Tap and than one network you to the first network hold the network you would prefer to use and then select are not connecting to signal it has received Connect the network you would prefer to use The New Network Some applications are Use the application buttons on the keypad as they map to Detected notification not fully compatible the tiles in the tile bar appears but the tile bar with all features of the e To dismiss the notification press the right application and tile options are not Windows Mobile 6 5 button on the
39. suspended or shut down To access the Internet using a Bluetooth PAN connection to a Bluetooth enabled cellular phone you must 1 Pair the GeoExplorer 6000 series handheld with a cellular phone that supports the Bluetooth PAN profile 2 Enable the PAN connection on the handheld Step 1 Pairing with the cellular phone 1 Make sure that the handheld and the Bluetooth device you want to pair with are within five meters of each other and that the Bluetooth radio in each device is turned on 2 On the GeoExplorer 6000 series handheld tap Settings Bluetooth 3 In the Devices tab tap Add new device The handheld searches for other Bluetooth devices and displays them in the list If the device you are trying to connect is not displayed in the list ensure that the device is on and within range and then tap Refresh to search for devices again 4 Tap the name of the device you want to pair with and then tap Next on the right softkey 5 Inthe Passcode field enter a passcode of your choice between 1 and 16 characters Note Trimble recommends that you enter only numbers as some devices do not support passcodes that include letters 6 Tap Next on the right softkey 7 When prompted enter the same passcode on the other device On the handheld the Partnership Settings screen appears 8 Ifrequired change the name of the device in the Display Name field 9 Select the Network Access Point check box The boxes for othe
40. that you obtained from the service provider i From the Connection Control field select Auto if you want the GNSS field software to automatically establish and end connections to the VRS network as necessary Manual if you want to connect or disconnect only when you tap Ext Source in the Setup screen j Tap Done to confirm the settings and return to the Real time Settings form Tap Done to confirm the real time settings and return to the main screen of the Setup section If you selected Auto in the Connection Control field the Ext Source button is depressed and the software attempts to connect to the server If you selected Manual in the Connection Control field tap the Ext Source button that appears below the Status bar in the Setup section to connect the Trimble GNSS field software to the Internet correction source Tip To disconnect or reconnect to the server at any time tap Ext Source To view the status of the real time correction source open the Status section select the Real time subsection and then select External from the Summary list button Downloading background map files from an Internet map server l Make sure that the coordinate system selected in the TerraSync software matches the coordinate system of the map server In the Map section of the TerraSync software pan or zoom to make sure that the area for which you want a background image is displayed on the map If the map server covers the area
41. the Home Recharging states Gheraino screen changes to E You can still tap the icon to view EEA the level of battery power To check the level of battery power remaining on a spare battery or one that is not inside the handheld press the battery icon on the battery pack label The level of charge indicator will light up with the approximate level of battery power remaining on the battery Each LED represents a 20 increment in battery capacity Low battery indicators When the battery level reaches GeoExplorer 6000 Series User Guide 29 2 Getting Started e 15 the battery icon in the title bar of the Home screen changes to E e 10 the Power LED on the handheld flashes red and the Main battery low message appears on the handheld e 5 the Main battery very low message appears on the handheld Trimble recommends that you recharge the battery when any of these indicators appear Swapping the battery If the battery runs low while you are working you can swap the battery without the need to close files and shut down the handheld and can resume working straight away 1 Save any open files 2 Ensure that you have a spare battery close by with sufficient charge to keep working see Checking the level of battery power page 29 3 Turn off the handheld or put the handheld in Swap Battery mode see page 33 A N CAUTION In Swap Battery mode the battery LED shows as a red warning When the device is
42. to a folder on the storage card Photos saved to the main memory are saved in the My Pictures folder e Still filename prefix Use this option to give still photos a customized filename prefix e Video filename prefix Use this option to give videos a customized filename prefix Time limit for videos To set the automatic time limit for videos choose a suitable time limit from the list of options 122 GeoExplorer 6000 Series User Guide Troubleshooting In this chapter Power issues Backlight issues Touch screen issues Storage card issues Keypad issues Connection issues GNSS receiver issues Real time DGNSS issues Recommended GNSS settings for maximum precision and productivity CHAPTER Use this section to identify and solve common problems that may occur when using the GeoExplorer 6000 series handheld Please read this section before you contact technical support GeoExplorer 6000 Series User Guide 123 8 Troubleshooting Power issues Problem Cause The handheld does not The battery is flat turn on The handheld is turned off The handheld has locked up The internal temperature has risen above the allowed maximum 40 C or 104 F for charging the battery The screen is blank The handheld is not charging The battery power percentage bar does not appear in the Power control The battery has 0 power Under some circumstances the AC adapter may be faintly audible at close
43. to be turned off The integrated GNSS receiver is turned off and any application using GNSS is disconnected If a wireless radio is turned on the amp LED is flashing the Wi Fi radio will be turned off and the Bluetooth and wireless cellular modem radios will remain turned on The handheld is capable of receiving data via Bluetooth or the cellular modem radio while it is in Suspend mode The handheld is able to automatically wake up to calendar alarms if it is in Suspend mode A N CAUTION To save battery power use the Wireless Manager to turn off the wireless radios before you place the handheld into Suspend mode 32 GeoExplorer 6000 Series User Guide Getting Started 2 To turn on the handheld when it is in Suspend mode press the Power key The handheld is immediately ready for operation There may be a delay of up to 30 seconds while the integrated GNSS receiver and the Wi Fi radio automatically reactivate You can configure the handheld to automatically enter Suspend mode when it has been idle for a specified time By default the handheld is set to enter Suspend mode if it is not used for one minutes To change the time before the handheld enters Suspend Power ee YK 2 37 mode Battery lt Advanced gt Info 1 Tap the title bar of the Home or the Start screen On battery power and then tap Lal The Power control appears Se 5 minutes displaying the Battery tab Saientenalwowen Turn off screen if device 2 Tap the Advan
44. turning off the handheld page 32 Then store the handheld as recommended see Storing the handheld page 20 Before suspending the handheld use the Wireless Manager to turn off all wireless radios Make sure that all the radios are turned off after suspending the handheld If a radio is still active the Wireless LED will flash once every four seconds Troubleshooting 8 Backlight Issues Problem Cause Solution The backlight does not The backlight is not set to Tap Fy Settings System Backlight to view the come on when you tap turn on in the Backlight Backlight control and make sure that the screen or press a control e the Turn on backlight when a button is pressed or button the screen is tapped check box is selected e the brightness is not set to Dark in the Brightness tab The screen is blank or The backlight is off Tap the screen or press a button hard to see The backlight level needs Tap Q Settings System Backlight to view the to be adjusted Backlight control and then adjust the slider in the Brightness tab Touch screen issues Problem Cause Solution The touch screen does not The touch screen is Realign the screen see page 53 respond to finger or stylus incorrectly aligned taps The touch screen is locked To unlock the touch screen slide the Unlock icon The handheld has locked Reset the handheld see Resetting the handheld up page 34 The screen is blank The handheld is turned Press the
45. use Bluetooth wireless technology to connect to other Bluetooth enabled devices that are within range typically within 5 m to 10 m of the handheld You can connect to e Bluetooth enabled devices such as cellular phones to access the Internet and receive data for example to obtain real time corrections from a VRS network e computers and other handheld devices to exchange files e other devices such as a GeoBeacon receiver laser rangefinder or barcode scanner Note For information on connecting to external devices using the optional USB to serial converter see Connecting to other devices using the USB to serial converter page 117 The following table lists devices you can connect to using the handheld and where to find detailed information on how to achieve these connections Cellular modem Connect to a cellular network page 88 Connect to a Wi Fi access point page 90 Bluetooth wireless technology Connect to another Bluetooth enabled device page 92 paired and non paired connections Connect to a Bluetooth enabled phone for page 99 Internet access or real time corrections including VRS networks Connect to a Bluetooth enabled serial device page 106 Connect to an office computer to use page 109 ActiveSync technology WMDC Output GNSS data to other devices using page 112 Bluetooth wireless technology Enable other devices to transfer files using page 113 Bluetooth wireless technology Beam files to or from
46. user name password and domain details when connecting e make sure that you have the correct APN Access Point Name from your cellular provider Step 1 Configure the connection To set up an automatic configuration l Tap amp Settings Connections Wireless Manager If the Phone is Off tap Phone to turn it on 2 Tap Settings Connections Connections 3 On the Connections screen on the Tasks tab tap Automatically configure connection The device holds a database of the most common cellular providers and the correct connection settings The handheld will attempt to identify the SIM vendor 4 Ifthe SIM vendor is recognised correctly tap Next to continue The connection settings are set up automatically The process takes about 30 seconds Ifthe SIM is not automatically detected or the vendor settings are not known you will need to set up the configuration manually Go to To set up a manual configuration below 88 GeoExplorer 6000 Series User Guide Getting Connected 6 To set up a manual configuration l o p e w P n Tap W Settings Connections Wireless Manager If the Phone is Off tap Phone to turn it on Tap amp Settings Connections Connections Under Tasks tap Add a new modem connection Enter a name for the connection for example My Connection In the Select a modem field select Cellular Line WWAN and then tap Next Enter the APN provided by your cellular provi
47. you are in it will provide a background image that matches the current map extents GeoExplorer 6000 Series User Guide 103 6 Getting Connected 3 Tap Layers and then select Background files The pere dk Background Files form appears Background Fil 4 Inthe Location field select Internet and then use a the fields that appear to specify the Map Server Open Cis Ea type the URL of the server the service and the layers from that service that you want to download eas 5 Tap Done to close the Background File form and enone eau T Ip IS must Matec e ierrabync download the selected background map Brh system k This may take some time When a downloadisin laerss lt lt progress an icon amp appears in the top left corner fy of the map Once the background file is downloaded the hourglass icon appears until the downloaded image is rendered and becomes visible If you pan or zoom beyond the extents of the downloaded image new images are downloaded automatically and displayed in the background of the map To stop automatic downloading of background files either clear the address of the map server from the URL field or set the Location field to Default and then clear the check box next to any files Reconnecting to the Internet To reconnect to the Internet at any time after setting up the connection repeat the steps listed under Step 2 Connecting to the Internet using the dialup networ
48. 0 series handheld connecting to host devices The Bluetooth profile or service used for the connection is shown between the arrows for example the DUN service is used for a connection to a cell phone and the Serial Port service is used for a serial connection to a GeoBeacon receiver or laser rangefinder The solid arrows indicate the flow of information between devices For example when the GeoExplorer 6000 series handheld connects as a client to e acellphone the handheld uses the DUN or PAN host service provided by the phone to access the Internet and receive real time differential corrections or background map data e alaptop computer or office computer the devices use the ActiveSync technology to exchange information to and from either device e Bluetooth headphones the handheld uses the Wireless Stereo host service provided by the headphones to play audio files and system sounds GeoExplorer 6000 Series User Guide 93 6 Getting Connected Providing Bluetooth services as a host You can use the GeoExplorer 6000 series handheld as a Bluetooth host device which provides services to Bluetooth client devices that are within range Host services provided by the GeoExplorer 6000 series handheld are Service Description Serial Port Emulates an RS 232 serial COM port on the handheld For more information see Outputting GNSS data to other devices using Bluetooth wireless technology File Transfer Allows a client to browse
49. 10 Additional Software Services The Device Software may permit Trimble Microsoft their affiliates and or their designated agent to provide or make available to you Software updates supplements add on components or Internet based services components of the Software after the date you obtain your initial copy of the Software Supplemental Components 1 10 1 If Trimble provides or makes available to you Supplemental Components and no other end user license agreement terms are provided along with the Supplemental Components then the terms of this EULA shall apply 1 10 2 If Microsoft its affiliates and or its designated agent makes available Supplemental Components and no other end user license agreement terms are provided then the terms of this EULA shall apply except that the Microsoft entity or affiliate entity providing the Supplemental Component s shall be the licensor of the Supplemental Component s 1 10 3 Trimble Microsoft and each of their affiliates and or their designated agents reserve the right to discontinue any Internet based services provided to you or made available to you through the use of the Device Software 1 11 Links to Third Party Sites If the Software provides links to third party websites those links are provided to you only as a convenience and the inclusion of any link does not imply an endorsement of the third party website by Microsoft or Trimble 1 12 Other Rights and Limitations 1 The So
50. 21 Additional help ea cee oe aoe oe a A eee eee hae A GeO ee 2 a 21 Windows error reporting Geauga er eeeaved Fou P Ee ae eee eee eee 21 2 GGG Sta 6 hc tee he de CHM DEKE DS 23 Parts of the GeoExplorer 6000 series handheld 2 0 ee eee 24 Keypad DUONG eeu eeetheeeeae wee eee eae ee eee hee eeeae pee eet ee eeu 25 Powennge the handheld on eadecdseyacetatedeeecuetes we se seer tease Soe 26 AC adaptor SACU eres ooo Bae ae oa eee ee A ee ee Oe ae OE See 26 Bater Gale 24 445 n eae ee ee hee eo6o Rea ee eo Soe ee ee ee oes 26 Msertine TAC DAU Cl Veeck ean ee eee eaten Bae ee Coe eee ey eee ae oe eS 27 Charone Ine Datel yes 454 62bre eer hen bb ee eee PRed Ge Rees Geen des 28 Checking the level of battery power 2 0 0 0 eee eee eee ee eee 29 oWapp ng the Datlely saa rera ntse aaee a aee EES S 30 COnservine DOWE eirt sinma gaa Ea e Eae a aA ED e ews ee E E i d 31 Turning on and turning off the handheld 2 2 ee ee 32 DUSPENC MOC ae etre hud eke hae Ce eee Behe bee eee aed ees 32 Swap Daltery MOdG sasssa risida ekaa PEGE eee eH EEE ES ee ees 33 Resetting the handheld seee peere das aid enema a e Pe oe A oe eee 34 Perlormine a cOle hese sa astran Sua 6 ae ew a 34 Peflorm ng a Meng Tes l s aoe gop eo eee ooo kideei bi itda ieiti 34 Resetting to factory default settings 20 00 cee eee ee ee ee 35 OIGMING Gat E E eee AGE eee ey Yee ae ee eee eee ee yh yb ee eee ee es 36 GeoExplorer 6000 Series User
51. Drive Suite 100 Westminster CO 80021 USA EUROPE amp AFRICA Trimble Germany GmbH Am Prime Parc 11 65479 Raunheim GERMANY ASIA PACIFIC amp MIDDLE EAST Trimble Navigation Singapore PTE Limited 80 Marine Parade Road 22 06 Parkway Parade Singapore 449269 SINGAPORE Trimble www trimble com
52. For more information see Suspend mode page 32 e Set the backlight to automatically turn off when the handheld is idle for a specified time For more information see Backlight page 53 e Turn off the integrated Bluetooth Wi Fi and wireless cellular modem radios whenever you are not using them For more information see Turning on and turning off the integrated radios page 84 e Disconnect from the integrated GNSS receiver when GNSS data is not required using the applications Disconnect or Deactivate GNSS command When you disconnect from GNSS the integrated GNSS receiver switches off and stops drawing power Note Do not disconnect from GNSS if you will be reconnecting within about five minutes A GNSS application can take up to 30 seconds to reactivate the integrated GNSS receiver so disconnecting to save power can cost time GeoExplorer 6000 Series User Guide 31 2 Getting Started Turning on and turning off the handheld If the screen on the handheld is blank the handheld is in Suspend mode or Battery Change mode see page 32 or has been shut down To turn on the handheld press the Power key briefly less than one second To turn off the handheld and put the handheld into Suspend mode press the Power key briefly less than one second The handheld is placed in a very low power state but the Bluetooth and wireless cellular modem radios may remain active see Suspend mode page 32 To completely shut down the handhel
53. Help X Tip If the GPS Pathfinder Office software is installed on the office computer you can configure the Connection Manager utility in the GPS Pathfinder Office software to automatically detect when you connect a GeoExplorer 6000 series handheld to the computer This enables you to automatically transfer data from the TerraSync software differentially correct the data and then export it to a GIS For more information refer to the GPS Pathfinder Office Software Help 62 GeoExplorer 6000 Series User Guide Connecting to an Office Computer 4 Managing the connection using ActiveSync technology l Connect the handheld to the computer see page 61 The Synchronization Setup Wizard appears Synchronization Setup Wizard Welcome to the Pocket PC Sync Setup Wizard To set up a syne partnership between this computer and your Pocket PC click Next IF You click Cancel you can still Copy and move files between your Pocket PC and this computer Add and remove programs on your Pocket PC Cancel Note Ifthe connection is not made automatically check that the connection is enabled in the ActiveSync technology and on the handheld For more information see Troubleshooting page 123 2 Doone of the following To synchronize files and data between the handheld and a computer click Next and then follow the instructions in the Synchronization Setup Wizard To transfer data between the handheld and the co
54. IMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TITLE AND NONINFRINGEMENT THE STATED EXPRESS WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR LIABILITIES ON THE PART OF TRIMBLE ARISING OUT OF OR IN CONNECTION WITH ANY PRODUCT BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY THE ABOVE LIMITATION MAY NOT APPLY TO YOU Limitation of Liability TRIMBLES ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANYWAY TO THE PRODUCTS SOFTWARE AND ACCOMPANYING DOCUMENTATION AND MATERIALS INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF DATA OR ANY OTHER PECUNIARY LOSS REGARDLESS OF WHETHER TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF DEALING WHICH DEVELOPS OR HAS DEVELOPED BETWEEN YOU AND TRIMBLE BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU PLEASE NOTE THE ABOVE TRIMBLE LIMITED WARRANTY PROVISIONS WILL NOT APPLY TO PRODUCTS PURCHASED IN TH
55. ION OF LIABILITY 3 1 LIMITATION OF LIABILITY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL INCIDENTAL INDIRECT CONSEQUENTIAL OR PUNITIVE DAMAGES HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE OR THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES EVEN IF TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY EXCLUSIVE REMEDY PROVIDED IN THIS EULA IN NO EVENT SHALL THE TOTAL CUMULATIVE LIABILITY OF TRIMBLE AND ITS SUPPLIERS IN CONNECTION WITH THIS EULA OR THE SOFTWARE WHETHER BASED ON CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE STRICT LIABILITY OR OTHERWISE EXCEED THE ACTUAL AMOUNT PAID TO TRIMBLE FOR THE SOFTWARE LICENSE GIVING RISE TO THE CLAIM BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU 4 GENERAL 4 1 This EULA shall be governed by the laws of the State of California and applicable United States Federal law without reference to conflict of laws principles or provisions The United Nations Convention on Contracts for the International
56. OSE JURISDICTIONS E G MEMBER STATES OF THE EUROPEAN ECONOMIC AREA IN WHICH PRODUCT WARRANTIES ARE THE RESPONSIBILITY OF THE LOCAL DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED IN SUCH A CASE PLEASE CONTACT YOUR TRIMBLE DEALER FOR APPLICABLE WARRANTY INFORMATION Notice to Australian Purchasers The Australian Consumer Law Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Trimble s warranty as set out in the user manual accompanying this statement or as described in the warranty card accompanying the Product you purchased is in addition to any mandatory rights and remedies that you may have under the Australian Consumer Law Official Language THE OFFICIAL LANGUAGE OF THESE TERMS AND CONDITIONS IS ENGLISH IN THE EVENT OF A CONFLICT BETWEEN ENGLISH AND OTHER LANGUAGE VERSIONS THE ENGLISH LANGUAGE SHALL CONTROL End User License Agreement for Product Software IMPORTANT READ CAREFULLY THIS END USER LICENSE AGREEMENT EULA IS A LEGAL AGREEMENT BETWEEN YOU AND Trimble Navigation Limited Trimble and applies to the computer software provided with the Trimble product purchased by you whet
57. Power button to turn on the handheld off The battery is flat Recharge or swap the battery see page 28 or page 30 The handheld has locked Reset the handheld see Resetting the handheld up page 34 The screen is hard to see The backlight level needs Open the Backlight control and then adjust the to be adjusted backlight level see Backlight page 53 The backlight is off Tap the screen to turn on the backlight You are unable to see Some applications are designed for portrait parts of an application orientation only To view the entire application windows when the screen window change the screen display to portrait See is in landscape orientation Screen page 53 The selected display theme Select the High Contrast display theme Tap Ww does not have enough Settings Personal Home select the High Contrast contrast theme and then tap OK GeoExplorer 6000 Series User Guide 125 8 Troubleshooting Storage card Issues Solution Problem Cause The handheld does not The handheld does not recognize a storage card support SDIO SD input output cards Use an SD or SDHC card Files on the storage card Files have been encrypted Remove encryption from the files see Encrypting files are not visible or are not on another device and h ave on storage cards page 37 able to be opened a menc file extension Keypad Issues Solution Problem Cause Pressing the The hardware application application key
58. S positions meet your required accuracy 7 Inthe Required Accuracy field select the estimated accuracy that is required before GPS positions are logged 8 Tap Done Note Accuracy settings do not affect GNSS positions that are used for navigation GNSS positions are still calculated by the GNSS receiver and are available for navigation GeoExplorer 6000 Series User Guide 73 5 Using the GNSS Receiver Connecting to a real time differential correction source Use a real time differential GNSS DGNSS source to give you better accuracy as you collect data For more information about how real time differential GNSS works see Differential GNSS explained page 80 Using real time corrections from an Internet source DGNSS corrections are often broadcast over the Internet For example corrections generated by a VRS network are commonly broadcast over an Internet server A VRS network uses data from several base stations to provide rover receivers with corrections that are generally more accurate than corrections from a single base station Alternatively you can connect to a server that provides DGNSS corrections from a single base station For information on how to connect to the Internet and receive real time corrections from an Internet server see Connecting to a Bluetooth enabled device page 92 or Connecting to a Bluetooth enabled phone for Internet access or real time corrections including VRS networks page 99 Using SBAS cor
59. S software tap TerraSync Q 2 Yi T 4 20 Real time Settings The Real time Settings form appears 2 Inthe Choice 1 field select Integrated SBAS Choice 1 Integrated SBAS A 3 To select particular satellites tap the Setup Choice 2 ENERE button next to the Choice 1 field Select Becks eto Mine Custom tracking mode and then enable or disable tracking of particular satellites Tap OK to return to the Real time Settings screen 4 Inthe Choice 2 field specify whether to use uncorrected positions or to stop using GNSS positions if corrections are not available 5 Tap Done Using real time corrections from an external correction source You can improve the accuracy of your data by using real time corrections from an external correction source such as a GeoBeacon receiver or a DGNSS radio Connect the external correction source to a Bluetooth port see page 97 Use the GNSS field software to set up and monitor the real time input source that you want to use The integrated GNSS receiver communicates only through its GNSS COM ports COM2 COM3 and COM4 Trimble GNSS field software such as TerraSync and GPS Controller automatically redirects input from an external correction source connected to COM or to a Bluetooth port to the real time GNSS COM port COM4 Note For information on configuring the GNSS field software to use corrections from a VRS network or single base station that transmits
60. Sale of Goods will not apply to this EULA Jurisdiction and venue of any dispute or court action arising from or related to this EULA or the Software shall lie exclusively in or be transferred to the courts the County of Santa Clara California and or the United States District Court for the Northern District of California You hereby consent and agree not to contest such jurisdiction venue and governing law 4 2 Section 4 1 notwithstanding if you acquired this product in Canada this EULA is governed by the laws of the Province of Ontario Canada In such case each of the parties to this EULA irrevocably attorns to the jurisdiction of the courts of the Province of Ontario and further agrees to commence any litigation that may arise under this EULA in the courts located in the Judicial District of York Province of Ontario If you acquired this product in the European Union this EULA is governed by the laws of The Netherlands excluding its rules governing conflicts of laws and excluding the United Nations Convention on the International Sale of Goods In such case each of the parties to this EULA irrevocably attorns to the jurisdiction of the courts of The Netherlands and further agrees to commence any litigation that may arise under this EULA in the courts of The Hague The Netherlands 4 3 Trimble reserves all rights not expressly granted by this EULA 4 4 Official Language The official language of this EULA and of any documents re
61. USB to serial converter cable Null modem cable Hard carry case Range pole Range pole bracket Vehicle mounting bracket Tempest antenna Tornado antenna Zephyr Model 2 antenna Pole mountable ground plane Requires USB to serial converter sold separately Backpack kit Screen protectors 2 pack Stylus kit GeoBeacon receiver receives differential corrections from a beacon network Replacement battery pack Replacement international AC adaptor Replacement carry pouch Replacement hand strap kit Compatible with GeoXH XT handhelds for improved yield Also improves accuracy for the GeoXT handheld only Compatible with the GeoXH handheld for improved yield of high accuracy positions For more information go to www trimble com geoxh shtml or www trimble com geoxt shtml GeoExplorer 6000 Series User Guide 19 1 Introduction Use and care of the handheld To protect the GeoExplorer 6000 series handheld when not in use Trimble recommends storing the handheld in the pouch provided When using the handheld To protect the touch screen from pressure and abrasive objects Trimble recommends that you apply one of the screen protectors provided with the GeoExplorer 6000 series handheld Protect the touch screen by using your finger or the stylus provided and avoid using excessive pressure and sharp or abrasive objects Keep the outer surface free of dirt and dust Ensure that protectiv
62. USER GUIDE GeoExplorer 6000 series Trimble USER GUIDE GeoExplorer 6000 series Version 1 00 Revision G May 2012 Trimble Trimble Navigation Limited 10355 Westmoor Drive Suite 100 Westminster CO 80021 USA www trimble com Legal Notices Copyright and Trademarks 2011 2012 Trimble Navigation Limited All rights reserved Trimble the Globe amp Triangle logo GeoExplorer and GPS Pathfinder are trademarks of Trimble Navigation Limited registered in the United States and in other countries EVEREST GeoBeacon GeoXH GeoXT GPS Analyst GPScorrect H Star Floodlight Tempest TerraSync Tornado VRS and Zephyr are trademarks of Trimble Navigation Limited Microsoft ActiveSync Excel OneNote Outlook PowerPoint Windows Windows Live Windows Media Windows Mobile Windows Vista and the Windows Start logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Trimble Navigation Limited is under license All other trademarks are the property of their respective owners Release Notice This is the May 2012 release Revision G of the GeoExplorer 6000 Series User Guide The GeoExplorer 6000 series handheld s operating system is based on the Microsoft Windows Mobile version 6 5 operating system Limited Warranty Terms and Conditions
63. XIMUM EXTENT PERMITTED BY APPLICABLE LAW TRIMBLE AND ITS SUPPLIERS DISCLAIM ALL OTHER WARRANTIES TERMS AND CONDITIONS EITHER EXPRESS OR IMPLIED BY STATUTE COMMON LAW OR OTHERWISE INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES TERMS AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TITLE AND NONINFRINGEMENT WITH REGARD TO THE SOFTWARE ITS SATISFACTORY QUALITY AND THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES TO THE EXTENT ALLOWED BY APPLICABLE LAW IMPLIED WARRANTIES TERMS AND CONDITIONS ON THE SOFTWARE ARE LIMITED TO NINETY 90 DAYS YOU MAY HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE JURISDICTION TO STATE JURISDICTION NO WARRANTIES FOR THE MICROSOFT SOFTWARE THE MICROSOFT SOFTWARE is provided AS IS and with all faults AND TRIMBLE PROVIDES NO WARRANTY WITH RESPECT THERETO THE ENTIRE RISK AS TO SATISFACTORY QUALITY PERFORMANCE ACCURACY AND EFFORT INCLUDING LACK OF NEGLIGENCE FOR THE MICROSOFT SOFTWARE IS WITH YOU ALSO THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE MICROSOFT SOFTWARE OR AGAINST INFRINGEMENT 2 5 PLEASE NOTE THE FOREGOING TRIMBLE LIMITED WARRANTY PROVISIONS MAY NOT APPLY TO SOFTWARE PRODUCT LICENSES PURCHASED IN THOSE JURISDICTIONS SUCH AS COUNTRIES OF THE EUROPEAN UNION IN WHICH PRODUCT WARRANTIES ARE OBTAINED FROM THE LOCAL DISTRIBUTOR IN SUCH CASES PLEASE CONTACT YOUR TRIMBLE DEALER FOR APPLICABLE WARRANTY INFORMATION 3 TRIMBLE LIMITAT
64. a Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission rules The radios in this device have been designed and manufactured to not exceed stipulated emission limits for exposure to radio frequency RF energy as required by the Federal Communications Commission of the US Government 47 C ER 2 1091 and 2 1093 The external antenna connector provided in this device is for GNSS antennas only Accessories The following optional accessories have been approved for use with this device P N 88014 00 GeoExplorer 6000 series AC Power Kit P N 88056 00 GeoExplorer 6000 Series Vehicle Power Supply P N 88049 03 USB to Serial Converter Cable Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limites applicables aux appareils num riques de Classe B prescrites dans le reglement sur le brouillage radio lectrique dict par
65. a Wi Fi connection Alternatively you can use Bluetooth wireless technology to connect to the Internet using a cellular phone You can also connect directly to other Bluetooth enabled devices such as a GeoBeacon receiver a laser rangefinder or a barcode scanner You can also use the optional USB to serial converter to connect to a range of external devices using a cabled serial connection Deactivating the integrated radios Note lf you are unsure about whether the GeoExplorer 6000 series handheld radios are approved for use in your country check with your Trimble reseller Use the Radio Activation Manager software to deactivate the integrated Wi Fi and or Bluetooth radio or to reactivate the radios if they have been deactivated The Radio Activation Manager software runs on an office computer The latest copy of the software is available for download from the Trimble website Go to www trimble com support shtml click the link for your receiver type GeoXH or GeoXT click Downloads click GeoExplorer 6000 Series and then click Radio Activation Manager Turning on and turning off the integrated radios You can use the Wireless Manager application to turn on and turn off the GeoExplorer 6000 series handheld s Wi Fi Bluetooth and or cellular modem radio see Using the Wireless Manager page 85 You can also turn on or turn off the Bluetooth radio from within the Bluetooth application see Turning on and turning off the Blueto
66. action you want to occur when you press the button or tap the softkey Button lt Right Softkey gt Camera Camera 4 Tap OK 2 Assign a program lt Left Softkey gt v GeoExplorer 6000 Series User Guide 49 3 Using the Windows Mobile Operating System Home Use the Home settings to change the display theme that controls the appearance of the Home screen and to customize how items appear on the Home screen Appearance You can use a theme to customize the background picture on the Home screen the color of the title and tile bars menus and messages To change the display theme 1 Tap Settings Home home gt ye GH 1 20 2 Tap the Appearance tab Items lt Appearance Items Select a theme for your device 3 Do one of the following a Classic Blue a Beam To use a predefined theme select it from the list DVF green Delete Isaac Mizrahi purple To select the picture that you want to display in the Home screen background select the Use i this picture as the background check box Then _ Use this picture as the background tap Browse to search for a file on the handheld 4 Tap OK Rock and Republic black items You can choose between e the Windows default Home screen view which allows you to flick through the list of entries giving access to functions such as email text messaging current time and Internet Explorer e customising which items appear on the Home
67. adio is deactivated the message Problem with Bluetooth hardware may appear when you try to turn on the Bluetooth radio or discover devices Making the handheld visible discoverable to other Bluetooth devices To allow other Bluetooth enabled devices to connect to the GeoExplorer 6000 series handheld or if the handheld will not connect to or pair with another device you are attempting to connect to you must make the handheld visible this is sometimes referred to as discoverable To make the handheld visible to other devices 1 Tap Settings Bluetooth 2 Tap the Mode tab 3 Select the Turn on Bluetooth check box if it is not already selected This enables the integrated Bluetooth radio 4 Select the Make this device visible to other devices check box 5 Tap OK Connecting wirelessly to other devices and networks You can use a connection to a cellular network using the integrated cellular modem or a connection to a Wi Fi access point using the integrated Wi Fi radio to connect to the Internet at broadband speeds or a corporate network to e browse the Internet or an Intranet and send and receive data for example to obtain real time corrections from a VRS network e send and receive messages for example email instant messages or SMS messages GeoExplorer 6000 Series User Guide Getting Connected 6 access files on the network Wi Fi access points are also known as hotspots You can
68. affiliates When allowed by your local laws Trimble and Microsoft exclude implied warranties of merchantability fitness for a particular purpose and non infringement LIABILITY LIMITATIONS You can recover from Microsoft and its affiliates only direct damages up to fifty U S Dollars U S 50 00 or equivalent in local currency You cannot recover any other damages including consequential lost profits special indirect or incidental damages This limitation applies to Anything related to the Software services content including code on third party internet sites or third party programs and claims for breach of contract breach of warranty guarantee or condition strict liability negligence or other tort to the extent permitted by applicable law It also applies even if Microsoft should have been aware of the possibility of the damages The above limitation may not apply to you because your country may not allow the exclusion or limitation of incidental consequential or other damages 2 LIMITED WARRANTY FOR TRIMBLE PRODUCT SOFTWARE 2 1 Limited Warranty Trimble warrants that the Software exclusive of the Microsoft Software will perform substantially in accordance with the accompanying written materials for a period of twelve 12 months from the date of purchase This limited warranty gives you specific legal rights you may have others which vary from state jurisdiction to state jurisdiction The above limited wa
69. amages arising out of errors in the speech recognition process 10 You may not publish the Software for others to copy 11 You may not use the Software for commercial software hosting services 1 13 Notice Regarding the MPEG 4 Visual Standard The Software may include MPEG 4 visual decoding technology This technology is a format for data compression of video information MPEG LA L L C requires this notice USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG 4 VISUAL STANDARD IS PROHIBITED EXCEPT FOR USE DIRECTLY RELATED TO A DATA OR INFORMATION i GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE AND ii FOR PERSONAL USE ONLY AND B OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA L L C If you have questions about the MPEG 4 visual standard please contact MPEG LA L L C 250 Steele Street Suite 300 Denver CO 80206 www mpegla com 1 14 If the Device Software is provided by Trimble separate from the Device on media such as a ROM chip CD ROM disk s or via web download or other means and is labeled For Upgrade Purposes Only you may install one 1 copy of such Device Software onto the Device as a replacement copy for the existing Device Software and use it accordance with this EULA including any additional end user license agreement terms accompanying the upgrade Device Software 1 15 If any software component s is provided by Trimble separate f
70. an result in personal injury and or property damage To prevent injury or damage Do not use or charge the battery if it appears to be damaged Signs of damage include but are not limited to discoloration warping and leaking battery fluid Do not store or leave your device near a heat source such as near a fireplace or other heat generating appliance or otherwise expose it to temperatures in excess of 70 C 26 GeoExplorer 6000 Series User Guide Getting Started 2 158 F such as on a vehicle dashboard When heated to excessive temperatures battery cells could explode or vent posing a risk of fire Do not immerse the battery in water Do not use or store the battery inside a vehicle during hot weather Do not drop or puncture the battery Do not open the battery or short circuit its contacts A N WARNING Avoid contact with the rechargeable Lithium ion battery if it appears to be leaking Battery fluid is corrosive and contact with it can result in personal injury and or property damage To prevent injury or damage If the battery leaks avoid contact with the battery fluid If battery fluid gets into your eyes immediately rinse your eyes with clean water and seek medical attention Do not rub your eyes If battery fluid gets onto your skin or clothing immediately use clean water to wash off the battery fluid Do not open the battery or short circuit its contacts A N WARNING Charge
71. and use the rechargeable Lithium ion battery only in strict accordance with the instructions Charging or using the battery in unauthorized equipment can cause an explosion or fire and can result in personal injury and or equipment damage To prevent injury or damage Do not charge or use the battery if it appears to be damaged or leaking Charge the Lithium ion battery only in a Trimble product that is specified to charge it Be sure to follow all instructions that are provided with the battery charger Discontinue charging a battery that gives off extreme heat or a burning odor Use the battery only in Trimble equipment that is specified to use it Use the battery only for its intended use and according to the instructions in the product documentation Inserting the battery To insert the battery into the handheld 1 Slide the battery into the cavity with the label facing upwards as shown in Figure 2 1 2 Push the battery in until it clicks into place GeoExplorer 6000 Series User Guide 27 2 Getting Started A N CAUTION Make sure that the battery is fully inserted and that both the left and right latches are fully engaged If the battery is not properly inserted it may fall out if the device is dropped Figure 2 1 Inserting the battery Note Charge the battery completely before using the handheld for the first time If the battery has been stored for longer than six months charge it before use
72. are to process or to generate output data for the benefit of or for purposes of rendering services to any third party over the Internet or other communications network 5 You may make one backup copy of the Software You may use it only to reinstall the Software on the Device 6 You may transfer the Software only with the Device the Certificate of Authenticity label and these license terms directly to a third party Before the transfer that party must agree that these license terms apply to the transfer and use of the Software You may not retain any copies of the Software including the backup copy 7 The Software is subject to United States export laws and regulations You must comply with all domestic and international export laws and regulations that apply to the Software These laws include restrictions on destinations end users and end use For additional information see http www microsoft com exporting 8 Without prejudice as to any other rights Trimble may terminate this EULA without notice if you fail to comply with the terms and conditions of this EULA In such event you must destroy all copies of the Software and all of its component parts 9 If the Microsoft Software includes speech recognition component s you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process Neither Trimble Microsoft nor any of their suppliers shall be liable for any d
73. as a GeoBeacon receiver or a laser rangefinder select Serial Port acomputer to access ActiveSync or WMDC select ActiveSync Note Only ActiveSync shows on the Windows Mobile device Select ActiveSync even if you use the WMDC on the desktop computer Note For more information on the types of devices that the GeoExplorer 6000 series handheld can connect to and the supported Bluetooth services see Connecting to a Bluetooth device as a client page 92 10 Tap Finish 11 Tap OK to close the Bluetooth application 12 Tap jg to close the Settings screen You have now created a partnership between the GeoExplorer 6000 handheld and the other Bluetooth enabled device so that they can communicate To start using the connection you must complete the configuration steps for that type of connection and then connect to the device For more information see e Connecting to a Bluetooth enabled phone for Internet access or real time corrections including VRS networks page 99 e Connecting to a Bluetooth enabled serial device page 106 e Connecting to an office computer using Bluetooth wireless technology page 109 98 GeoExplorer 6000 Series User Guide Getting Connected 6 Connecting to a Bluetooth enabled phone for Internet access or real time corrections including VRS networks If your GeoExplorer 6000 series handheld does not include the integrated cellular modem you can still connect to a cellular network using the Bluetoo
74. atellites is partially or fully blocked by obstructions such as buildings trees or land masses The effect of satellite shadow is a reduction in the number of satellites that the receiver is able to track In general the quality of your data increases with the number of satellites being used to calculate the position Multipath is when GNSS satellite signals are reflected off nearby objects such as buildings or cars causing an erroneous signal to be received by the GNSS antenna This can cause errors of several meters Signal to Noise Ratio SNR is a measure of the strength of the satellite signal relative to the background noise GNSS quality degrades as the signal strength decreases Weak signals may be caused by signals coming through vegetation multipath signals or low satellite elevation Dilution of Precision DOP is a measure of the quality of GNSS positions based on the spread geometry of the satellites in the sky that are used to compute the positions When satellites are widely spaced relative to each other the DOP value is lower and in general position accuracy is greater If the view of the sky is partially affected by satellite shadow or if all of the satellites are in one area of the sky the geometry and DOP may be poor 134 GeoExplorer 6000 Series User Guide To maximize precision and productivity Tracking more satellites can help to improve satellite geometry and thereby improve accuracy Activat
75. ce or WGS84 for any other beacon service 6 From the Type field select Single Base 7 From the Connection Method field select Serial Port TerraSync a Yi 4 T 4 20 Ase OOOO ee External Source Settings Correction Datum INAD 1983 Conus CORS96 M Type Connection Method Serial Port v Port COM9 Bluetooth 1 Real time Protocol Auto Station ID Cm Cn 8 From the Port field select the name of the COM port that you selected in the Bluetooth application when you set up the connection to the serial device 9 Tap Done to confirm the external source settings and return to the Real time Settings form 10 Tap Done to confirm the real time settings and return to the main screen of the Setup section The real time correction source is now set up for use The TerraSync software automatically connects to the correction source when you run the software and automatically disconnects from the source when you close the software To manually disconnect from the correction source at any time go to the Real time Settings form and from the Choice 2 field select Use Uncorrected GNSS To view the status of the real time correction source open the Status section select the Real time subsection and then select External from the Summary list button Using data from an external source in the TerraSync software To configure the TerraSync software to use data from an external source for exa
76. ced tab cs inte 3 From the On battery power option select the Turn off screen if device not used for check box and then select the idle time from the drop down list 4 Tap OK Swap Battery mode Swap Battery mode is a low power mode that allows you to remove an empty battery and replace it with a fresh battery without closing files and applications it maintains the main memory contents and keeps applications running but does not allow you to operate any of the handheld s functions The handheld appears to be turned off The integrated GNSS receiver is turned off and any application using GNSS is disconnected All wireless radios are powered down and the device is unable to be automatically woken up When in Swap Battery mode the handheld operates on backup power with the battery removed From the time that the battery is removed you have approximately 45 seconds to replace the battery before the backup power supply is consumed and the handheld shuts down To switch to Swap Battery mode press and hold the Power key and then tap Swap Battery on the Power menu The battery LED shows as a red warning When the device is ready the red LED turns off and the battery can be safely swapped Generally the red LED will only display for half a second or less but it may display for three seconds or so Do not remove the existing battery until the red LED turns off A N CAUTION Removing the battery when the red LED warning light is still
77. ceiver with any GNSS field software that accepts NMEA messages e the Centimeter Output option See Activating the Centimeter Output option page 80 for more details GeoExplorer 6000 Series User Guide Using the GNSS Receiver 5 Activating the Floodlight satellite shadow reduction technology and the NMEA Output options The Floodlight satellite shadow reduction technology is provided as standard with the GeoXH handheld For the GeoXT handheld you will need to purchase the Floodlight satellite shadow reduction technology option The NMEA option must be purchased for both the GeoXH handheld and the GeoXT handheld if required Contact you Trimble reseller for more information Both the Floodlight satellite shadow reduction technology option and the NMEA Output option must be activated on your handheld using the Option Activation Wizard The wizard can either automatically retrieve an activation file over the Internet or you can copy the file manually to the device using an external storage card or a USB cable The activation wizard uses the file to determine which options to activate on the handheld To activate these options using the Option Activation wizard do the following l Tap Settings System System Information the System Information screen appears 2 Select the Options tab and then tap Activate Options 3 If you have received an activation file from your Trimble reseller select Manually activate purchase
78. ckground Tap amp J Task Manager and then select and close click End Task any GNSS applications you are not using e Make sure that connections are not left in use by the GNSS Connector software close the application when you are not using the connections Connect to COM2 if the GNSS field software uses NMEA messages or COM3 for TSIP messages For information on which protocol to use check the documentation for the application Move to a location where the receiver has a clear view of the sky and ensure the antenna is not obstructed Alternatively adjust the GNSS settings to increase productivity For more information refer to the Help provided with the GNSS field software If you are using Trimble field software use smart settings See Using Smart Settings page 76 Wait until the DOP value falls below the maximum DOP specified Alternatively adjust the GNSS settings to increase productivity For more information refer to the Help provided with the GNSS field software If you are using Trimble field software use smart settings See Using Smart Settings page 76 If you are collecting data for postprocessing clear the wait for real time selection Check that the real time correction source is setup correctly see Connecting to a real time differential correction source page 74 The handheld can take up to two seconds to detect that an external antenna has been connected or disconnected Config
79. communicate only with devices with which the handheld has a Bluetooth partnership select the Secure Connection check box 7 Tap Finish 8 Tap OK to close the Bluetooth application 9 Tap to close the Settings screen Step 3 Configuring the GNSS field software to use data from the serial device Once you configure the connection between the GeoExplorer 6000 series handheld and the Bluetooth enabled serial device you must configure the software to use the connection to receive data To use real time corrections in Trimble field software see Using real time corrections from an external serial device below To use an Bluetooth enabled external sensor such as a laser rangefinder or a barcode scanner in TerraSync software see Using data from an external source in the TerraSync software page 108 Using real time corrections from an external serial device 1 Start the Trimble GNSS field software and then open the Setup section 2 Tap Real time Settings The Real time Settings form appears 3 From the Choice 1 field select External Source GeoExplorer 6000 Series User Guide 107 6 Getting Connected 4 Tap the Setup button beside the Choice J field The External Source Settings form appears 5 From the Correction Datum field select the datum used by the correction source to calculate corrections Trimble recommends that you select NAD 1983 Conus CORS96 if you are using a US Coast Guard beacon servi
80. corrections over the Internet see Step 3 Configuring the GNSS field software to use data received from the Internet source page 102 To set up an external correction source such as a GeoBeacon receiver or a DGNSS radio in the Trimble GNSS field software 1 Inthe Setup section of the GNSS software tap TerraSync Q E Yi T 4 26 Real time Settings The Real time Settings form fscupl 0 appears a External Source Settings 2 Inthe Choice J field select External Source ON wes 1984 _ D 3 Tap the Setup button next to the Choice 1 cs 1924 Ww field Type Single Base Connection Method 4 Inthe Connection Method field select Serial Port Serial Port v Port Pa 5 Inthe Port field select the COM port to use If you are using Real time Protocol Auto Station ID Any d the USB to serial converter select COM 1 GeoExplorer 6000 Series User Guide 75 5 Using the GNSS Receiver aBluetooth wireless connection select the COM port you configured for the Bluetooth connection in the COM Ports tab of the Bluetooth manager 6 Tap Done To set up an external correction source for use with non Trimble GNSS field software 1 Inthe Trimble GPS Controller software configure the GNSS receiver to use real time corrections on COM4 For more information see the steps above Note You must first install the GPS Controller software See GPS Controller software page
81. d press the Power key for one second until the Power menu appears and then tap Shutdown All running applications are shut down and the handheld is completely turned off The options available from the Power menu are as follows Button Used to Power Settings quickly access the Power Settings menus Backlight Settings quickly access the Backlight Settings menus Swap Battery put the handheld into Swap Battery mode This is a low power mode The handheld the integrated receiver and all wireless radios are turned off and you cannot operate the handheld Shutdown put the handheld into Shutdown mode Applications are shut down and the handheld is completely turned off Reset restart the handheld If the handheld stops responding to the stylus or if it does not respond when you press any of the keypad buttons try a soft reset For more information see Resetting the handheld page 34 access the Align Screen Sequence You can also press the left application al key to access the Align Screen Sequence If at any time the touch screen does not respond correctly to stylus taps start the screen alignment sequence and follow the on screen instructions Suspend mode When you press the Power key to turn off the handheld the handheld goes into Suspend mode This is a low power mode that maintains the main memory contents and keeps applications running but does not allow you to operate any of the handheld s functions The handheld appears
82. d aircraft To prevent the handheld from emitting radio signals do one of the following e To turn off the handheld press the Power button to display the Power menu then tap Shutdown e To turn off the Bluetooth Wi Fi and wireless cellular modem radios only a Tap the title bar on the Home or Start screen and then on the pull down list tap the jj or fj icon b In the Connectivity or the Phone dialog select Wireless Manager c Tap All to turn off all radios The status fields below the Wi Fi Bluetooth and Phone buttons change to Off Deactivating the integrated Wi Fi and Bluetooth radios The GeoExplorer 6000 series handheld is shipped with Wi Fi and Bluetooth wireless technology activated To use the Wi Fi or Bluetooth radio you need to turn it on see Turning on and turning off the integrated radios page 84 Note You may need to deactivate the Wi Fi and or Bluetooth radio in the handheld if the country in which you are working does not approve the use of Wi Fi and or Bluetooth wireless technology If you are unsure about whether the GeoExplorer 6000 series handhelds radios are approved for use in your country check with your Trimble reseller Use the Radio Activation Manager software to deactivate the integrated Wi Fi and or Bluetooth radio or to reactivate the radios if they have been deactivated The Radio Activation Manager software runs on an office computer The latest copy of the software is available for
83. d options Otherwise select Automatically check and activate purchased options 4 Do one of the following e Ifyou selected Automatically check and activate purchased options a Ensure that the device is connected to the Internet using a USB cable and the ActiveSync technology or a Wi Fi connection or Bluetooth wireless connection using the modem see Chapter 6 Getting Connected b Tap Get Updates c The Option Activation Wizard will run When the wizard finishes restart your device to complete the activate process e Ifyou selected Manually activate purchased options a Copy the activation XML file that you reecieved from your Trimble reseller to a folder on the device b Tap Get Updates c Browse to the folder that contains the activation file d Tap the file to initiate the activation process e The Option Activation Wizard will run When the wizard finishes restart your device to complete the activate process GeoExplorer 6000 Series User Guide 79 5 Using the GNSS Receiver Activating the Centimeter Output option The Centimeter Output option is available as an after purchase upgrade for the GeoXH handheld The Centimeter Output option upgrade is available as a bundle with TerraSync Centimeter edition software and increases the performance of the handheld to centimeter level positioning in both real time or postprocessing with an appropriate dual frequency differential correction source To have this optio
84. d the handheld is no longer able to read any encrypted files on a storage card This means that any files you have encrypted are permanently locked and unreadable by any device To avoid being unable to read previously encrypted files Trimble recommends that you use another device such as an office computer as the primary location for storing important data and to control the encryption of important files To enable encryption of files as they are written to a storage card 1 Tap Settings System Encryption 2 Select the Encrypt files when placed on a storage cards check box Note Encrypted files appear as ordinary files on the handheld they were encrypted on If the storage card is inserted in another device the files appear with a menc file extension and cannot be opened To disable encryption clear the Encrypt files when placed on a storage cards check box GeoExplorer 6000 Series User Guide 37 2 Getting Started Note Disabling encryption does not remove encryption from any existing files on the storage card but ensures that new files placed onto the storage card are not encrypted To encrypt files that are already stored on a storage card 1 Copy the files to the handhelds internal storage or to an office computer 2 Ensure encryption is enabled on the handheld 3 Copy the files back to the storage card The files are encrypted as they are written to the storage card To remove encryption from fi
85. d to the Connections screen You have now configured the dialup networking connection Step 2 Connecting to the Internet using the dialup network 1 Onthe handheld go to the Connections screen if it is not already open tap W Settings Connections Connections 2 Below My ISP tap Manage existing connections 3 Tap and hold the connection you want to use and then select Connect 4 Unless the phone provider confirmed that you must enter user name password and domain settings to access the Internet tap OK without entering any information in this screen Otherwise enter the required information and then tap OK 5 Ifthe phone prompts for confirmation to connect to the Internet accept the connection The phone dials the configured GPRS access number and then connects to the Internet A Connectivity notification appears on the handheld as the connection is being made After the connection is made you are returned to the My ISP screen To confirm that the GeoExplorer series handheld is connected to the phone or to check the status of the connection at any time tap the title bar and then tap the Connectivity icon on the pull down list The notification shows the name of the current connection and the time elapsed since the connection was made To hide the notification tap Hide Note If you have an active Wi Fi connection the connectivity icon appears as instead 6 Tap OK to close the My JSP screen 7 Tap OK to
86. der check with your provider first for correct settings some providers have multiple APN settings Tap Next Enter a username password and domain if required check with your provider these are often not required If not required leave these fields empty Tap Finished Step 2 Connect to the cellular network l Tap amp Settings Connections Wireless Manager If the Phone is Off tap Phone to turn it on Tap W Settings Connections Connections Under Tasks tap Manage existing connections The configured connections are listed Tap and hold the connection that you want to use Tap Connect from the pop up menu The task bar shows the connecting icon for example el When the connection is open established the task bar shows the connected icon for example H The icons shown depend on the network see Network and modem status indicators page 44 for full details Once connected open an application for example Internet Explorer to test the connection Some applications automatically launch the connection when you start the application if a current connection is not already established GeoExplorer 6000 Series User Guide 89 6 Getting Connected Connecting to a Wi Fi access point To connect to a Wi Fi access point you must 1 Set up the Wi Fi connection 2 Connect to the Wi Fi network or access point Note If you have installed a personal certificate on the handheld you do not
87. device such as a memory module You can do so by touching an unpainted metal surface To insert a SIM card 1 Turn off the handheld 2 Place the handheld on a dust free indoor surface 3 Flip open the SIM card slot door on the side of the handheld 38 GeoExplorer 6000 Series User Guide Getting Started 2 4 Insert the card into the SIM card slot with the gold contacts facing down Gently press the card until you hear a click and the card is locked into place 5 Close the SIM card slot door To remove the SIM card 1 Follow steps 1 to 3 above 2 Gently press the card in and then let go The card pops out 3 Gently slide the card out of the slot Fitting the hand strap The hand strap and screws are provided in the box with the handheld To fit the hand strap 1 Align the upper hand strap bracket with the two mounting holes and then use a coin or screwdriver to tighten the screws 2 Stretch the hand strap to align the bottom hand strap bracket with the mounting hole and then use a coin or screwdriver to tighten the screw GeoExplorer 6000 Series User Guide 39 2 Getting Started 40 GeoExplorer 6000 Series User Guide CHAPTER Using the Windows Mobile Operating System In this chapter The GeoExplorer 6000 series handheld is powered by the Windows Mobile 6 5 operating m Parts of the screen system m Interacting with the handheld This chapter describes the main features of this m Status indicators generation
88. ding on the number of satellites being tracked for example if you are tracking GLONASS and GPS satellites the amount of data being captured at once may often cause the 4800 bit limit to be exceeded Buffers have been added which allow the data to be stored and then sent when it is able to This avoids data corruption but may delay delivery of data and positions may take as long as 8 seconds to be sent from the time at which they were originally recorded If you need 4800bps output Trimble suggests that you try to minimise the effect by reducing the amount of NMEA data being sent for example by dropping out NMEA sentences from the NMEA stream Step 3 Configuring the other device to receive data from the handheld 1 On the other device run the application that will use the data from the handheld 2 Configure the application to connect to the COM port on the other device that you selected or was assigned when you created the serial port connection to the handheld Enabling other devices to transfer files using Bluetooth wireless technology To transfer files to and from another device without connecting using ActiveSync technology or the WMDC follow the general steps below Note The exact steps for transferring files will depend on the Bluetooth file management software that is installed on the other device GeoExplorer 6000 Series User Guide 113 6 Getting Connected Turn on the GeoExplorer 6000 series handhelds Blue
89. dio and make the handheld visible to other devices see page 86 On the other device turn on the Bluetooth radio Use the Bluetooth management software on the other device to scan for other Bluetooth devices and then set up a serial port connection to the GeoExplorer 6000 series handheld If prompted to enter a passcode on the other device enter a passcode of your choice that you will easily remember When prompted on the GeoExplorer 6000 series handheld accept the connection to the other device 112 GeoExplorer 6000 Series User Guide Getting Connected 6 6 Enter the same passcode on the GeoExplorer 6000 series handheld that you entered on the other device and then tap Next on the handheld 7 On the handheld tap Finish Step 2 Configuring the handheld to output data meye to the other device GNSS Connector settings 1 On the GeoExplorer 6000 series handheld tap Wes oca GNSS Connector to open the GNSS Connector l software PAREEN 2 Use the GNSS Connector software to output NMEA messages to COM9 This is the j N setia GeoExplorer 6000 series handheld s Host i me s20 Bluetooth serial port Stop bits i Parity 3 Use the Trimble GNSS field software to ensure NMEA output is set to On to configure the NMEA output settings output rate and messages and to configure the GNSS settings A N CAUTION NMEA standard dictates that a baud rate of 4800bps should be used for NMEA messages Depen
90. disclosure by the United States Government is subject to restrictions as set forth in this EULA 6 GeoExplorer 6000 Series User Guide and as provided in DFARS 227 7202 1 a and 227 7202 3 a 1995 DFARS 252 227 7013 c 1 ii OCT 1988 FAR 12 212 a 1995 FAR 52 227 19 or FAR 52 227 14 ALT III as applicable 1 18 Microsoft has contractually obligated Trimble to include the following terms in this EULA Product Support The Product support for the Software is not provided by Microsoft or its affiliates or subsidiaries For product support please refer to the Trimble support number provided in the documentation for the Device Not fault tolerant The Software is not fault tolerant Trimble installed the Software on the Device and is responsible for how it operates on the Device Restricted user The Microsoft Software was designed for systems that do not require fail safe performance You may not use the Microsoft Software in any device or system in which a malfunction of the Microsoft Software would result in foreseeable risk of injury or death to any person This includes operation of nuclear facilities aircraft navigation or communication systems and air traffic control No warranties for the software Microsoft gives no express warranties guarantees or conditions regarding the Microsoft Software Any warranties you receive regarding the Device or the Software do not originate from and are not binding on Microsoft or its
91. does key has been programmed not activate the to run another program or function shown on the to perform another action tile above it Do one of the following e Tap the touchscreen tile to activate the function shown on the tile e Re program the application key to perform the same action as the touchscreen tile To do this tap Settings Personal Buttons select the button to reprogram and then select lt Left Softkey gt or lt Right Softkey gt Connection issues Network connections Solution Problem Cause The connection with the If you change the proxy cellular phone suddenly settings of the ends handheld while connected to a cellular phone the cellular phone ends the connection Unable to connect to Data encryption settings another GeoExplorer are set incorrectly 6000 series handheld Make any changes to proxy settings before connecting to a mobile device When setting up a peer to peer ad hoc network with a WEP encryption set a Network Key rather than leaving the key blank to be provided automatically 126 GeoExplorer 6000 Series User Guide Troubleshooting 8 Windows Mobile Device Center Problem Windows Mobile Device Center will not connect to the handheld Cause Solution The connection is not In the Windows Mobile Device Center software on the initiated automatically office computer select Mobile Device Settings Connection Settings The Windows Mobile Restart the offic
92. download from the Trimble website Go to www trimble com support shtml click the link for your receiver type GeoXH or GeoXT click Downloads click GeoExplorer 6000 Series and then click Radio Activation Manager GeoExplorer 6000 Series User Guide 9 Safety Information Exposure to radio frequency radiation from Bluetooth and Wi Fi transmitters This device is approved as a portable device with respect to Radio Frequency RF exposure compliance The radiated output power of the internal wireless radio transmitters is less than 100 milliwatt which results in exposure levels far below the FCC radio frequency exposure limits even when operated in close proximity to the body The internal wireless radios operate within guidelines found in international radio frequency safety standards and recommendations which reflect the consensus of the international scientific community Trimble therefore believes the internal wireless radios are safe for use by users The level of electromagnetic energy emitted is hundreds of times lower than the electromagnetic energy emitted by wireless devices such as mobile phones However the use of wireless radios may be restricted in some situations or environments such as on aircraft Ifyou are unsure of restrictions you are encouraged to ask for authorization before turning on the wireless radios Exposure to radio frequency radiation from cellular wireless transmitters GeoExplorer 6000 series handhelds equip
93. e 0 00 e eee ee 114 Accessing a corporate network through your Internet connection 115 Connecting to other devices using the USB to serial converter 117 Connecting COrexermmalWCViCeS 6424243 48b554 5 FE hS8 Sb 545554448054 117 GeoExplorer 6000 Series User Guide 15 7 Using the Camera 0 0 2 eee ee ee ee 119 Paris OL CNC CAMCIA oh cee be bdancehhe dekh ed te cbh lead e ee E 120 Starting the camera application and capturing photos or video 120 Adustino camera SeRINOS s secreet 4 4 4464 ee Hew Shee AG ees 8 Se RS 121 Camera and VIGCOODUONS lt 4 6446 8 4e4 bese oe5e8e5 06 E S49 64 hd eee 122 8 Troubleshooting 2 0 ee ee 123 POWErisoUCS sae2cec4 2924 6eat e000 eRe ee ease eee ee ee eae eae tee ee es 124 BaCKIONbIsSUCs 26544 eed ogee Gee et OPE eh ee ees eRe ee eee SA 125 WOUCWSCICCIISCUCS ant a405 4en 5 ooo eh et eee Ghee eae ete ee eG haarees 125 ptorape oard doses oud geen ter Phan eek a eee eee oe He ee we E en ee 126 PPA E sera ee eee dered s 62 ee6 65s eee eed seeds Shed el aed oo ban 126 COMNCCHOMICSNCs aa5 soe head eeeee thee Sateen sek ed on Geeegetedauoea 126 Network connections esseede mec eeii 456044 SERGE EERE ES Ge ws 126 Windows Mobile Device Center naaa eee 127 ActiveSync technol gy aeuunceee heuer eae fob ae eG eee Re eee ee Rees 128 Bluetooth wireless technology 0 eee ee eee 129 VItrEKGOUMECHONS 22482406 bode O
94. e Connecting tothe COM POTT 12422524468 kakea a tada hee HES es GaSe Es 68 Using the GNSS field software 1 0 0 ienaa eau eae eee 69 Starting the GNSS field software 2 0 0 eee eee ee es 69 Viewing available GNSS satellites 2 0 2 2c ee 69 Resetting the GNSS TeCelvers oe 448 OGG hwo Ghee FEE EER a ES Es 70 Improving GNSS productivity using Floodlight satellite shadow reduction technology 70 Ensuring the accuracy of your GNSS data 0 00 eee ee ee 71 Accuracy settings and using accuracy based logging 0004 72 Connecting to a real time differential correction source 004 74 Connecting to an external antenna 2 2 eee eee 71 Planning a data collection session 1 2 naaa 78 Activating GNSS receiver option upgrades nanana aaa eee eee ees 78 Activating the Floodlight satellite shadow reduction technology and the NMEA Output OPLOS 26844 te theo hte ean ee eG tees ee eee he fae ee ae eet ee 79 Activating the Centimeter Output option 0 0 000 eee 80 Differential GNSS explained 442 0064 44 0b eee dda bew ee EAR eRe aw ee owe 80 Red ene DGNSo cu 6 2s452eaubn eos te ReO CUR One bade ee hae aes ee 80 Postorocessed DGNSS 4 y ae esc eA kee hee eee OA ee eee 6 eee es 81 Postprocessed real time DGNSS 0 2 00 ee ee 81 Outputting NMEA data to externalequipment 0 00002 eee eee 81 Con guring NMEA OUG Minoo henna eeaeoe
95. e Settings screen 116 GeoExplorer 6000 Series User Guide Getting Connected 6 Connecting to other devices using the USB to serial converter The optional USB to serial converter attaches to the USB port on the bottom of the handheld When the USB to serial converter is attached it adds a serial port COM1 to the GeoExplorer 6000 series handheld You can use the USB to serial converter to e receive differential corrections from an external real time correction source such as a Trimble GeoBeacon receiver or a DGPS radio see Using real time corrections from an external correction source page 75 e connect to other external devices such as a laser rangefinder see Using data from an external source in the TerraSync software page 108 and select COM1 instead of a Bluetooth COM port e connect to a computer to supply GNSS data see Outputting NMEA data to external equipment page 81 Connecting to external devices You can use the USB to serial converter to connect to an external device that has a serial port such as a computer Note When connecting to an office computer you cannot use ActiveSync technology or the WMDC to establish the connection or synchronize data To use ActiveSync or the WMDC you must use a USB cable or a Bluetooth connection see Connecting the handheld to a computer page 61 To connect to an external device that has a serial port 1 Attach the USB to serial converter to the handheld
96. e computer Disconnect the handheld from Device Center software the office computer reset it see Resetting the handheld does not recognize the page 34 and then reconnect it to the office computer GeoExplorer 6000 series handheld The connection is not In the Windows Mobile Device Center software on the enabled in Windows office computer click Mobile Device Settings Connection Mobile Device Center Settings If you are using on the computer e a USB cable make sure that the Allow USB connection check box is selected from the drop down list e a Bluetooth connection make sure that the correct port for Bluetooth is selected Then open the Bluetooth control on the handheld In the Devices tab tap the partnership and in the services list make sure that the ActiveSync check box is selected The connection is not On the handheld tap E ActiveSync Menu enabled on the Connections Make sure that the Synchronize all PCs using handheld this connection check box is selected and that the correct option is selected The handheld If you are using a USB cable use the USB to PC utility to connection settings change the connection method the handheld uses to conflict with network connect to the Windows Mobile Device Center on the settings or VPN client computer Tap QJ Settings Connections USB to PC software Utility Clear the Enable advanced network functionality check box The handheld stops using the default RNDIS me
97. e covers and doors are appropriately fitted to the external antenna port SIM and storage card areas so that they are kept free from dirt dust fluid ingress amp electrostatic discharge see Storage cards page 36 Protect the handheld from extreme temperatures For example do not leave the handheld on the dashboard of a vehicle When the battery is removed the handheld is not waterproof Avoid exposing the internals of the handheld to dust and moisture when removing the battery Trimble recommends that you only swap the battery indoors or from inside a vehicle Use the handstrap provided with the GeoExplorer 6000 series handheld To clean the handheld wipe it with a clean dry cloth Do not immerse the handheld in water Storing the handheld If you are not going to use the handheld for three months or more Trimble recommends that you do not leave the handheld in Suspend mode see page 32 Instead partially charge the battery and then turn off the handheld To prepare the GeoExplorer 6000 series handheld for storage l 2 3 4 Transfer any data that you need to an office computer Charge the battery to approximately 30 Press the Power key for one second until the Power menu appears and then tap Shutdown Store the handheld at room temperature To use the GeoExplorer 6000 series handheld after storage l 2 Press the Power key to turn on the handheld Recharge the battery see Charging the battery pa
98. e first time If the battery has been stored for longer than six months charge it before use Trimble recommends charging the battery for five hours to recharge it fully When fully charged the handheld battery provides enough power for a full working day 10 hours using the internal GNSS antenna and with the backlight on at the default settings Note Cold temperatures or using Bluetooth wireless technology Wi Fi or the wireless cellular modem consumes additional battery power and so shortens battery life between charges AC adaptor safety A N WARNING To use AC adaptors safely Use only the AC adaptor intended for the GeoExplorer 6000 series handheld Using any other AC adaptor can damage the handheld and may void your warranty Do not use the AC adaptor with any other product Make certain that the input voltage on the adaptor matches the voltage and frequency in your location Make certain that the adaptor has prongs compatible with your outlets Do not use the AC adaptor in wet outdoor areas it is designed for indoor use only Unplug the AC adaptor from power when not in use Do not short the output connector Be aware that there are no user serviceable parts in this product If the AC adaptor becomes damaged replace it with a new Trimble AC adaptor Battery safety A N WARNING Do not damage the rechargeable Lithium ion battery A damaged battery can cause an explosion or fire and c
99. e storage card into the storage card slot with the gold contacts facing down Gently press the card until you hear a click and the card is locked into place 4 Close the storage card slot door When you select the Save As option in an application the storage card appears in the list of available storage locations Note Do not store required data or applications to a storage card if the card will be removed Data saved to a storage card is available only when the card is inserted in the handheld To remove the storage card from the storage card slot gently press the card in and then let go The card pops out Encrypting files on storage cards To prevent sensitive data on an SD or SDHC card from being used if the card is lost or stolen files can be encrypted as they are placed on the card When encryption is enabled an encryption key is stored on the handheld Files are encrypted as they are copied or written to the storage card Files already saved on storage cards before enabling encryption are not automatically encrypted Note Because the encryption key is stored on the handheld encrypted files are only readable on the handheld on which they are initially encrypted It is not possible to read encrypted files on the storage card with any other device including another GeoExplorer 6000 series handheld or an office computer CAUTION If you reset the handheld to the factory default settings the encryption key is deleted an
100. e the AC adaptor in wet outdoor areas it is designed for indoor use only Unplug the AC adaptor from power when not in use 10 GeoExplorer 6000 Series User Guide Safety Information Do not short the output connector Be aware that there are no user serviceable parts in this product If the AC adaptor becomes damaged replace it with a new Trimble AC adaptor Electrostatic discharge A WARNING Static electricity can harm electronic components inside your handheld To prevent static damage Discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal surface The GeoExplorer 6000 series is designed for outdoor conditions however under conditions of low humidity extremely high voltage discharge events are possible Users are advised that the risk of causing discharge to sensitive electronics can be minimised by avoiding finger contact to the recessed connectors at the sides of the unit Battery safety A The removable rechargeable Lithium ion battery is supplied partially charged Charge the battery completely before using it for the first time see Powering the handheld page 26 If the battery has been stored for longer than six months charge it before use WARNING Do not damage the rechargeable Lithium ion battery A damaged battery can cause an explosion or fire and can resu
101. e the Floodlight satellite shadow reduction technology option See Activating GNSS receiver option upgrades page 78 Ensure the integrated GNSS receiver gets a clear view of the sky as possible Keep your body mass as far from the receiver as practical and do not crowd over the handheld Use an external antenna if needed to elevate the position of the antenna To reduce multipath where possible collect data in an open environment away from large reflective surfaces and with a clear view of the sky Activate the Floodlight technology option on your handheld to increase the total number of satellites visible to the receiver and reduce the risk of multipath affecting your solution See Activating GNSS receiver option upgrades page 78 Use smart settings with Trimble field software to allow the receiver to determine maximum precision positions regardless of available satellite signal strength See Using Smart Settings page 76 Activate the Floodlight technology option on your handheld to increase the total number of satellites visible to the receiver and reduce the risk of weak satellite signal affecting your solution See Activating GNSS receiver option upgrades page 78 Use smart settings with Trimble field software to allow the receiver to determine maximum precision positions regardless of available satellite geometry See Using Smart Settings page 6 Activate the Floodlight technology option on your handheld to increa
102. eceiver uses all available GNSS information to determine which combination of satellites to use to deliver the best position Once you set the receiver to use Smart Settings the receiver does the rest By default the receiver is configured to use Smart Settings In this mode the receiver will track all visible satellites and determine which to use in the position solution to automatically generate the most accurate position possible To open the GNSS Settings form do one of the following e Tap GNSS Settings in the Setup section e Tap a in the Skyplot Satellite Info or Plan section 76 GeoExplorer 6000 Series User Guide Using the GNSS Receiver 5 To enable Smart Settings select the Use Smart Settings ESSE 2 Y 12 57 check box GNSS Settings GNSS Receiver Port Use Smart Settings NMEA Output Use GLONASS Automatic selection of satellites to calculate the best position possible and maximize productivity To define custom GNSS settings clear the Use Smart GPS Controller 2 Y 4 103 Settings check box Editable fields appear enabling you to specify the required GNSS quality settings Enter values in these fields GNSS Settings GNSS Receiver Port C Use Smart Settings DOP Type Max PDOP Min SNR Select PDOP to filter positions by vertical and horizontal precision Select HDOP to filter positions by horizontal precision when vertical precision is not important AAK Connecting t
103. ection if pairing is supported by the other device as a paired connection creates a more secure connection and makes reconnecting to the device easier For more information see Pairing with a Bluetooth enabled device below Some devices such as a Trimble GeoBeacon receiver do not support paired connections Use a non paired connection if the device does not have a keyboard and if you know that the device does not automatically exchange a pre programmed passkey during pairing For more information see Setting up a connection to a non paired device page 97 GeoExplorer 6000 Series User Guide 95 6 Getting Connected Pairing with a Bluetooth enabled device Pairing the handheld with another Bluetooth enabled device creates a permanent security bond between the devices which helps to exchange information securely between the devices The paired relationship is established when two devices create and exchange a link key Once the relationship is established the handheld and the other Bluetooth device only need to have their Bluetooth radios turned on to exchange information they do not need to be visible to other devices To pair with a Bluetooth device 1 Make sure that the handheld and the Bluetooth device you want to pair with are within five meters of each other and that the Bluetooth radio in each device is turned on 2 On the GeoExplorer 6000 series handheld tap W Settings Bluetooth 3 In the Devices tab tap Add ne
104. effect of satellite shadow is a reduction in the number of satellites that the receiver can track In general the quality of your data decreases when the number of satellites which is used to calculate the position is low and in many cases when large portions of the sky are obstructed it is impossible to generate any positions at all The Floodlight satellite shadow reduction technology option for the GeoExplorer 6000 series reduces the effects of satellite shadow to help deliver more positions and better accuracy in conditions affected by satellite shadow The Floodlight technology option improves GNSS productivity using three key technologies e it enables GLONASS satellite tracking which greatly increases the number of satellites that the GNSS receiver can track Tracking more satellites can help to improve satellite geometry and thereby improve accuracy 70 GeoExplorer 6000 Series User Guide Using the GNSS Receiver 5 e it utilizes barometric measurements to assist the GNSS receiver The barometer measurements can assist by improving both the vertical and horizontal accuracy of positions particularly in conditions where the satellite count is very low for example under tree canopy e it improves the ability of the receiver to track weaker satellite signals which are common when working in the shadows of trees and buildings To achieve optimum Floodlight technology performance it is important that the barometer is kept free of
105. eld select the Flas fon ea same datum as the VRS network coordinate system Type VRS Connection Method Internet v c From the Type field select Internet 7 VRS ifthe real time correction source is a VRS network Sinele B ifth ee ti Not Applicable Single Base if the real time correction source is a single base station that Ge broadcasts its corrections over the Internet d From the Connection Method field select Internet Typically the IP address or URL of a VRS network has the format 10 3 123 456 1234 where the digits before the colon are the address and the digits after the colon are the port number 102 GeoExplorer 6000 Series User Guide Getting Connected 6 e Inthe Address field enter the IP address or URL of the VRS network or the server that is supplying the corrections from the VRS network f In the Port field enter the port number that you will use to connect to the server g Ifyou are connecting to a VRS network through a broadcast server tap the Setup button beside the Source field The GNSS field software attempts to establish a connection to the broadcast server If the connection is successful the Select Server form appears Select the server that you want to use and then tap Done to return to the External Source Settings form h Ifyou selected a VRS network that requires authentication the Name and Password fields appear Enter the user name and password
106. election to Auto cellular provider 130 GeoExplorer 6000 Series User Guide GNSS receiver issues Problem The handheld is not receiving GNSS positions NMEA data includes autonomous positions Cause The integrated GNSS receiver is not activated Incorrect configuration of serial COM port The GNSS COM port is already in use Only one application at a time can have the port open The GNSS field software is using the wrong GNSS COM port Not enough satellites are visible The DOP Dilution of Precision value for the current position is above the maximum DOP setting Wait for real time is selected in the GNSS field software and the integrated receiver is waiting to receive real time corrections External antenna connected but not receiving data The integrated GNSS receiver outputs autonomous positions when real time corrections are unavailable Troubleshooting 8 Solution Use the Connect or Activate GNSS GPS command in the field software to open the GNSS COM port and activate the integrated GNSS receiver For more information see Using the GNSS Receiver page 65 When supplying GNSS data to an external device using the COM1 USB to serial converter cable set the baud rate to the high speed TSIP setting 38400 8 1 Odd Do the following e Exit the software that is using the GNSS COM port and then retry in your application e Check that a GNSS application is not running in the ba
107. er and go to the file you want to send receive Bluetooth beams Tap and hold the file and then select Beam File 8 nsien Align ports The handheld scans for nearby devices Tap the device you want to send the file to The file is sent to the device A message reports Done or Failed depending on the outcome of the file transfer 114 GeoExplorer 6000 Series User Guide Getting Connected 6 Accessing a corporate network through your Internet connection Use a Virtual Private Network VPN connection to access a corporate network or Intranet Before you begin obtain the following information from your network administrator e user name and password e domain name e host name or IP address of the VPN server To access a corporate network through your Internet connection you must 1 Setup an Internet connection on the handheld 2 Setup a VPN connection 3 Connect to the corporate network or Intranet Step 1 Setting up an Internet connection on the handheld Do one of the following e Set up a Wi Fi connection to an access point For more information see page 90 e Connect to the Internet using the internal cellular modem For more information see page 92 e Connect to the Internet using a Bluetooth enabled phone For more information see page 99 Step 2 Setting up a VPN connection Connections g Z 6 GH 10 23 1 Onthe GeoExplorer 6000 series handheld tap o Settings Connections Connections nie
108. er to the ActiveSync Help or the WMDC Help on the office computer During synchronization e Messages are copied from the mail folders of Exchange or Outlook on the office computer to the Messaging folder on the handheld By default you will receive messages from the past 3 days only the first 100 lines of each message and file attachments of less than 100 KB in size e Email messages in the Outbox folder on the handheld are transferred to Exchange or Outlook and then sent from those programs e Email messages in subfolders in other email folders in Outlook are synchronized only if they were selected for synchronization using ActiveSync technology or the WMDC To send and receive email for a synchronized Exchange or Outlook account connect the handheld to the office computer Synchronization automatically begins and the handheld sends and receives email GeoExplorer 6000 Series User Guide 55 3 Using the Windows Mobile Operating System Connecting directly to an email server In addition to synchronizing email messages with an office computer you can send and receive email messages by connecting to an email server Before you can send and receive email you must create an email account in the Messaging software Note You must set up an Internet connection on the handheld before you can set up and use your email account For more information see Connecting to a Wi Fi access point page 90 Connecting to a Bluetooth enabled
109. et the correct time Device lock Tap the Device Lock icon on the Start screen to lock the screen and keypad while the handheld remains turned on Once the handheld is locked the screen and most of the keys do not respond until the handheld is unlocked The exception is the Power key which always respond when pressed Communication with external devices such as a GNSS receiver or external sensors used by GNSS field software is not interrupted by locking the handheld This means that you can keep using the GNSS field software when the handheld is locked For example you could lock the device so that you can safely transport it between features while keeping the software connected to the GNSS receiver so that you can continue recording GNSS positions The lock screen provides multiple unlock sliders for different applications when there are new notifications For example if a new email has arrived an email unlock slider takes you straight to the email To unlock the device slide the Unlock icon for the required application to take you straight to that application You can help to keep your data secure by requiring a password each time the handheld is turned on Tap W Settings Lock to set a password or to change password settings GeoExplorer 6000 Series User Guide 51 3 Using the Windows Mobile Operating System Power To open the Power control do one of the following e Tap the title bar of the Home screen or the Sta
110. etails when connecting an external device to the phone using Bluetooth dialup networking Step 1 Connecting the handheld to the phone and configuring the connection to the dialup network 1 Make sure that the handheld and the Bluetooth device you want to connect to are within five meters of each other and that the Bluetooth radio in each device is turned on For more information see Turning on and turning off the integrated radios page 84 2 On the handheld tap K Settings Connections Connections 3 Below My ISP tap Add a new modem connection GeoExplorer 6000 Series User Guide 99 6 Getting Connected 4 Enter the name for the connection For example peere oP 46 GH 1 01 enter the name of the phone or the VRS network Make New Connection that you will connect to Enter a name for the connection My Connection 5 From the Select a Modem dropdown list select ees Bluetooth and then tap Next ran 6 Ifthe phone you want to connect to is listed go to Step 7 below not listed a Tap Add new device The handheld searches for other Bluetooth devices and displays them in the list If the handheld s integrated Bluetooth radio is turned off it is now automatically turned on b From the list of available devices select the device you want to connect to and then tap Next c To pair with the phone enter a passcode of your choice that you will easily remember onto the handheld and then tap Next
111. ftware contains valuable trade secrets proprietary to Trimble and its suppliers To the extent permitted by relevant law you shall not nor allow any third party to copy decompile disassemble or otherwise reverse engineer the Software or attempt to do so provided however that to the extent any applicable mandatory laws such as for example national laws implementing EC Directive 91 250 on the Legal Protection of Computer GeoExplorer 6000 Series User Guide 5 Programs give you the right to perform any of the aforementioned activities without Trimble s consent in order to gain certain information about the Software for purposes specified in the respective statutes i e interoperability you hereby agree that before exercising any such rights you shall first request such information from Trimble in writing detailing the purpose for which you need the information Only if and after Trimble at its sole discretion partly or completely denies your request may you exercise such statutory rights 2 This Software is licensed as a single product You may not separate its component parts for use on more than one computer nor make more copies of the software than specified in this EULA 3 You may not rent lease or lend the Software 4 No service bureau work multiple user license or time sharing arrangement is permitted For purposes of this EULA service bureau work shall be deemed to include without limitation use of the Softw
112. ge 28 20 GeoExplorer 6000 Series User Guide Introduction 1 Technical assistance Technical support Go to the GeoExplorer 6000 series handheld technical support page www trimble com geoxh_ts asp or www trimble com geoxt_ts asp on the Trimble website for the latest support information about the software including e support notes detailing support issues e documentation the latest files available for download Additional help If you still cannot find the information that you need contact your Trimble reseller Windows error reporting If for any reason a Microsoft Windows Error Reporting dialog appears indicating that the handheld or Trimble GNSS field software has encountered a problem and needs to close you are prompted to send an error report to Microsoft Trimble recommends that you click Send and then click any subsequent links that are used to obtain additional information Trimble can access the report that is sent to Microsoft and use it to improve the GeoExplorer 6000 series handheld GeoExplorer 6000 Series User Guide 21 1 Introduction 22 GeoExplorer 6000 Series User Guide Getting Started In this chapter Parts of the GeoExplorer 6000 series handheld m Keypad buttons m Powering the handheld m Turning on and turning off the handheld m Resetting the handheld m Storing data m Installing and removing a SIM card Fitting the hand strap CHAPTER This chapter describe
113. hat you have previously saved on the handheld However any unsaved data may be lost Note Perform a hard reset only if a soft reset does not resolve the problem To perform a hard reset press and hold the Power key until the boot screen appears and then release the Power key 34 GeoExplorer 6000 Series User Guide Getting Started 2 Resetting to factory default settings Reset the handheld to factory default settings to restore the handheld to it s original state or only if a soft reset and then a hard reset does not resolve the problem CAUTION Resetting the handheld to factory default settings erases all data installed applications and settings stored in the handheld except for any data or applications that were pre installed on the handheld or are stored on a storage card It does not change the language of the operating system used on the handheld CAUTION If you have encrypted files on a storage card and you reset the handheld to factory default settings the encryption key on the handheld is deleted This means that any files you have encrypted on a storage card are permanently locked and unreadable by any device For more information see Encrypting files on storage cards page 37 Tip To quickly and easily restore data deleted by performing a factory reset synchronize the handheld with a computer before you reset the handheld to the factory default settings Once the handheld is reset then resynchronize the handheld
114. her built into hardware circuitry as firmware embedded in flash memory or a PCMCIA card or stored on magnetic or other media or provided as a stand alone computer software product and includes any accompanying written materials such as a user s guide or product manual as well as any online or electronic documentation Software or Product Software This EULA will also apply to any Software error corrections updates and upgrades subsequently furnished by Trimble unless such are accompanied by different license terms and conditions which will govern their use You have acquired a Trimble Product Device that includes Software some of which was licensed by Trimble from Microsoft Corporation or its affiliates collectively Microsoft The Software licensed from Microsoft as well as associated updates supplements internet based services and support services media printed materials and online or electronic documentation Microsoft Software are protected under this EULA The Software is also protected by copyright laws and international copyright treaties as well as other intellectual property laws and treaties The Software is licensed not sold BY USING THE SOFTWARE INCLUDING USE ON THIS DEVICE YOU ACCEPT THESE TERMS IF YOU DO NOT ACCEPT THEM DO NOT USE THE DEVICE OR SOFTWARE INSTEAD CONTACT TRIMBLE FOR A REFUND OR CREDIT As described below using some features also operates as your consent to the transmiss
115. inder To connect to a Bluetooth enabled serial device you must 1 Connect to the Bluetooth enabled serial device 2 Configure the COM port on the handheld to use for the connection 3 If necessary configure the GNSS field software to use data received from the serial device Step 1 Connecting to the Bluetooth enabled serial device Connect the handheld to the Bluetooth enabled device selecting the Serial Port service if it is not already selected see Connecting to a Bluetooth enabled device page 92 Step 2 Configuring the COM port to use on the handheld 1 Onthe GeoExplorer 6000 series handheld tap g Settings Bluetooth 2 Tap the COM Ports tab 106 GeoExplorer 6000 Series User Guide Getting Connected 6 3 Tap New Outgoing Port Bluetooth a XE Gt 9 52 Mode lt COMPorts PAN 4 Select the device you want to set up the connection to and then tap Next After pairing with a device to set up a COM port tap New Outgoing Port For other options tap and hold an existing port 5 Select the COM port on the GeoExplorer handheld to use for the connection New Outgoing Port The GeoExplorer 6000 series handheld has three COM ports COM5 COM6 and COM7 available for connections out to Bluetooth enabled serial devices 6 Doone of the following To communicate with any device for example if you have formed this connection without pairing to a device clear the Secure Connection check box To
116. ion and the logging interval at the base station For more information refer to the documentation provided with the postprocessing software Postprocessed real time DGNSS If you collected data with 10 cm or better accuracy in real time you do not need to postprocess the data However if your data files contain autonomous uncorrected positions as well as real time corrected positions Trimble recommends that you postprocess the data During postprocessing you can choose whether to correct only autonomous positions or all positions If you collected data with submeter accuracy in real time Trimble recommends that you postprocess the data as postprocessed data is usually more accurate than data corrected in real time Outputting NMEA data to external equipment Use the GNSS Connector software to specify how the integrated GNSS receiver communicates with equipment that is connected to one of the handheld s external communications ports Note You must first install the GNSS Connector software See GNSS Connector software page 67 for details To open GNSS Connector tap GNSS Connector The GNSS Connector software lets you connect the NMEA GNSS COM port to COM1 or Bluetooth ports and configure port settings such as the baud rate for COM1 Use the GNSS Connector software to output NMEA messages from the integrated GNSS receiver to another device such as an external data collector GeoExplorer 6000 Serie
117. ion automatically configures the ArcPad software to use the integrated GNSS receiver on COM3 using the Trimble GPScorrect protocol To connect to the receiver tap the GPS button To configure a real time Differential GNSS source or to view status information run the GPScorrect extension To do this tap the GPScorrect button in the Trimble toolbar 5 In ArcPad tap the GPS drop down menu and then select WwW GPS Preferences from the drop down menu Tap the GPS tab 3 GPS In the Protocol field select NMEA 0183 In the Port field select COM2 Tap OK Tap the GPS button ee p Using the GNSS Receiver 5 GPS field software Configuration details NMEA application Configure the software to connect to GNSS on COM2 and then use the Connect or Activate GNSS command TSIP application Configure the software to connect to GNSS on COM3 and then use the Connect or Activate GNSS command Using the GNSS field software Depending on the GNSS field software you have installed the default GNSS field software will be GPS Controller TerraSync or the Trimble GPScorrect extension for Esri ArcPad software The GPS Controller software enables you to check the current GNSS status or to configure the integrated GNSS receiver Note You must first install the GPS Controller software See GPS Controller software page 66 for details Depending on the GNSS field software you have i
118. ion of certain standard computer information for Internet based services WARNING If the Software contains voice operated technologies then operating this Software requires user attention Diverting attention away from the road while driving can possibly cause an accident or other serious consequence Even occasional short diversions of attention can be dangerous if your attention is diverted away from your driving task at a critical time Trimble and Microsoft make no representations warranties or other determinations that ANY use of this Software is legal safe or in any manner recommended or intended while driving or otherwise operating a motor vehicle This EULA does not grant you any rights with respect to the Windows Mobile Device Center Microsoft ActiveSync or Microsoft Outlook 2007 Trial which are subject to the licenses accompanying those items 1 SOFTWARE PRODUCT LICENSE 1 1 License Grant Subject to the terms and conditions of this EULA Trimble grants you a non exclusive right to use one copy of the Software in a machine readable form only as installed on the Device Such use is limited to use with the Device for which it was intended as set forth in the product documentation The Device Software is licensed with the Device as a single integrated product The Device Software installed in read only memory ROM of the Device may only be used as part of the Device into which it was embedded You may use the installation S
119. k on page 101 If you selected Auto in the Connection Control field of the Trimble GNSS field software the software automatically connects to the Internet source that is providing real time differential corrections To manually reconnect the Trimble GNSS field software to the Internet source that is providing real time differential corrections open the software and then tap the Ext Source button that appears below the status bar in the Setup section Connecting to the Internet through a Bluetooth enabled phone using the Bluetooth PAN profile This section describes how to set up a Bluetooth Personal Area Network PAN connection for Internet access using Bluetooth enabled cellular phone The PAN service is not available on GeoExplorer 6000 series handheld models which have an integrated modem Making a Bluetooth PAN connection with a Bluetooth enabled cellular phone is similar to making a Bluetooth Dialup Networking DUN connection see Connecting to a Bluetooth enabled phone for Internet access or real time corrections including 104 GeoExplorer 6000 Series User Guide Getting Connected 6 VRS networks page 99 in that it enables the handheld to access the Internet If PAN connections are supported by your cellular phone the advantages of using a PAN connection rather than a DUN connection are e PAN connections are easier to set up e PAN connections automatically attempt to reconnect when the handheld is resumed from being
120. klight The backlight makes the screen easier to read in low light but uses extra power Use the Backlight control to configure power saving settings for the backlight To open the Backlight control e Tapk Settings System Backlight GeoExplorer 6000 Series User Guide 53 3 Using the Windows Mobile Operating System To set the backlight to automatically turn off 1 To automatically turn off the backlight when the handheld is idle and is using battery power tap the Battery Power tab Select the Turn off backlight check box and then select a time from the drop down list 2 To automatically turn off the backlight when the handheld is idle and is using external power tap the External Power tab Select the Turn off backlight check box and then select a time from the drop down list 3 Tap OK To change the brightness 1 Tap the Brightness tab 2 Tap and drag the Brightness Level slider control to the left to make the backlight darker or to the right to make the backlight brighter 3 Tap OK 54 GeoExplorer 6000 Series User Guide Backlight Q g XD amp amp 6 10 Brightness lt Battery Power gt External Warning Using backlight while on battery power will substantially reduce battery life Turn off backlight if device is not used for 1 min v Turn on backlight when a button is pressed or the screen is tapped Adjust power settings to conserve power V Backlight Q e XAT 6 11 Battery
121. l apply 1 Fix es means an error correction or other update created to fix a previous software version that does not substantially conform to its Trimble specifications 2 Minor Update occurs when enhancements are made to current features in a software program and 3 Major Upgrade occurs when significant new features are added to software or when a new product containing new features replaces the further development of a current product line Trimble reserves the right to determine in its sole discretion what constitutes a Fix Minor Update or Major Upgrade 2 3 Customer Remedies Trimble and its suppliers entire liability and your sole remedy with respect to the Software shall be either at Trimble s option a repair or replacement of the Software or b return of the license fee paid for any Software that does not meet Trimble limited warranty This limited warranty is void if failure of the Software has resulted from 1 accident misuse abuse or misapplication 2 alteration or modification of the Software without Trimble s authorization 3 interaction with software or hardware not supplied or supported by Trimble 4 your improper inadequate or unauthorized installation maintenance or storage or 5 if you violate the terms of this EULA Any replacement Software will be warranted for the remainder of the original warranty period or thirty 30 days whichever is longer 2 4 NO OTHER WARRANTIES TO THE MA
122. l separately it is not valid You should keep the label on the device or packaging to prove that you are licensed to use the Software To identify genuine Microsoft Software see http www howtotell com 1 4 Connectivity Software Your Device package may include Windows Mobile Device Center or Microsoft ActiveSync software If it is included then you may install and use it in accordance with the license terms that are provided with it If no license terms are provided then you may install and use only one 1 copy of the Software on a single computer 1 5 Digital Certificates The Software uses digital certificates in X 509 format These digital certificates are used for authentication 1 6 Phone Functionality If the Device Software includes phone functionality all or certain portions of the Device Software may be inoperable if you do not have and maintain a service account with a wireless telecommunication carrier Mobile Operator or if the Mobile Operator s network is not operating or configured to operate with the Device 1 7 Upgrade Software In the event that any upgrades to the Software including Microsoft Software are provided under this EULA then the following shall apply you may follow the applicable instructions accompanying this Software and install one 1 copy of the Software on one 1 Device presently containing a licensed copy of a predecessor version of the Software unless this EULA indicates that this Software
123. lating thereto is English For purposes of interpretation or in the event of a conflict between English and versions of this EULA or related documents in any other language the English language version shall be controlling Registration To receive information regarding updates and new products please contact your local dealer or visit the Trimble website at www trimble com register Upon registration you may select the newsletter upgrade or new product information you desire Notices Class B statement Notice to users This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenn
124. le Minist re des Communications du Canada Antenna Statement Under Industry Canada regulations this radio transmitter may only operate using an antenna of a type and maximum or lesser gain approved for the transmitter by Industry Canada To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power e i r p is not more than that necessary for successful communication Conform ment a la r glementation d Industrie Canada le pr sent metteur radio peut fonctionner avec une antenne d un type et d un gain maximal ou inf rieur approuv pour l metteur par Industrie Canada Dans le but de r duire les risques de brouillage radio lectrique a l intention des autres utilisateurs il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonn e quivalente p i re ne d passe pas l intensit n cessaire a l tablissement d une communication satisfaisante GeoExplorer 6000 Series User Guide 7 Licence exempt This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L ex
125. les so they can be read by other devices 1 Insert the storage card in the handheld and then connect the handheld to an office computer using Microsoft ActiveSync technology or the WMDC 2 Copy the encrypted files from the storage card to the office computer 3 To use the decrypted files on the handheld copy the files from the office computer to the handhelds internal storage 4 To store the decrypted files on a storage card ensure encryption is not enabled on the handheld and then copy the decrypted files from the office computer to the storage card Installing and removing a SIM card A A The GeoExplorer 6000 series 3 5G edition handhelds are equipped with a cellular modem To use the integrated modem the 3 5G edition handhelds require a SIM card CAUTION The SIM card and its contents can be easily damaged by scratches or bending CAUTION The presence of any dust or moisture in the SIM card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the SIM card slot Make certain that the SIM card slot door is attached correctly when you are using the handheld outdoors When inserting or removing a SIM card place the handheld on a dust free indoor surface CAUTION Static electricity can harm electronic components inside the handheld To prevent static damage discharge static electricity from your body before you touch any of the electronic components inside your
126. ll at the top of the screen to turn on all radios or to turn off all radios if they are already on Tap Wi Fi Bluetooth or Phone to turn on the radio that you want to use or to turn off the radio if it is already on The status fields below the Wi Fi button the Bluetooth button and the Phone button change pene eee eee from Offwhen the radios are turned on and ae amp the current state of the radio The Wi Fi status field shows Connecting or Available the Bluetooth status field shows On or Visible and the Phone status field shows On or the name of the cellular network that you are connected to 3 Tap to exit the Wireless Manager GeoExplorer 6000 Series User Guide 85 6 Getting Connected 86 After you turn on the Wi Fi radio the Wi Fiicon appears in the title bar to indicate that the Wi Fi radio is enabled A second icon 9 appears if a Wi Fi network is detected and a notification for the detected network may appear in the left softkey Turning on and turning off the Bluetooth radio from within the Bluetooth application 1 Tap QJ Settings Bluetooth Bluetooth g X 4E UD 5 53 2 Tap the Mode tab Devices Mode COM Ports 3 Select the Turn on Bluetooth check box to turnon LJ ero the radio or clear this check box to turn off the Make this device visible to other radio evices To connect to a device click on the Devices tab below 4 Tap OK Note Ifthe integrated Bluetooth r
127. loodlight technology option installed and activated GeoExplorer 6000 Series User Guide 65 5 Using the GNSS Receiver Supported GNSS field software You can use the GeoExplorer 6000 series handheld with any of the software products described below TerraSync software You can install version 5 10 or later of the TerraSync software on a GeoExplorer 6000 series handheld Use the software to collect and maintain GIS and GNSS data To install the TerraSync software run the downloaded setup file To obtain an installation code for installation you must register the Proof of Purchase Number POPN that you received when you purchased the software Detailed installation instructions are provided in the TerraSync Software Getting Started Guide Esri ArcPad software and the Trimble GPScorrect extension You can install the Esri ArcPad software version 10 on a GeoExplorer 6000 series handheld Use the software to collect and maintain GIS and GNSS data Detailed installation instructions for Esri ArcPad software are provided in the ArcPad documentation To be able to differentially correct ArcPad GNSS data install version 3 20 or later of the Trimble GPScorrect extension for Esri ArcPad software on a GeoExplorer 6000 series handheld You must install the ArcPad software before you install the GPScorrect extension Note Make sure your version of the GPScorrect extension is compatible with the version of ArcPad software you are using For m
128. lt in personal injury and or property damage To prevent injury or damage Do not use or charge the battery if it appears to be damaged Signs of damage include but are not limited to discoloration warping and leaking battery fluid Do not store or leave your device near a heat source such as near a fireplace or other heat generating appliance or otherwise expose it to temperatures in excess of 70 C 158 F such as on a vehicle dashboard When heated to excessive temperatures battery cells could explode or vent posing a risk of fire Do not immerse the battery in water Do not use or store the battery inside a vehicle during hot weather Do not drop or puncture the battery Do not open the battery or short circuit its contacts WARNING Avoid contact with the rechargeable Lithium ion battery if it appears to be leaking Battery fluid is corrosive and contact with it can result in personal injury and or property damage To prevent injury or damage If the battery leaks avoid contact with the battery fluid If battery fluid gets into your eyes immediately rinse your eyes with clean water and seek medical attention Do not rub your eyes If battery fluid gets onto your skin or clothing immediately use clean water to wash off the battery fluid Do not open the battery or short circuit its contacts GeoExplorer 6000 Series User Guide 11 Safety Information A WARNING Charge and use the
129. mple a laser rangefinder or barcode scanner 108 GeoExplorer 6000 Series User Guide Getting Connected 6 1 Start the TerraSync software and then open a data file 2 Inthe Setup section tap External Sensors The TerraSync Q a Y K am 3 08 External Sensors form appears 3 Ifyou are connecting to External Sensors alaser rangefinder select the Laser check lee box and then tap the Properties button Sensor 1 roperties beside the Laser check box The Laser Properties form appears B a barcode scanner or other external sensor select the Sensor 1 or Sensor 2 check box and then tap the Properties button beside the appropriate check box The Sensor Properties R form appears 4 Ifyou are connecting to a barcode scanner or other external sensor enter a name for the connection in the Name field 5 From the Port drop down list select the name of the COM port that you selected in the Bluetooth application when you set up the connection to the device 6 Tap Done to confirm the sensor settings and return to the External Sensors form 7 Tap Done to confirm the settings and return to the main screen of the Setup section 8 The external sensor is now setup for use and can be used to add data as attributes into an open file in TerraSync The device is automatically connected and disconnected when data files in TerraSync are opened and closed To check the status of the connection select the Comms subsection in
130. mputer without synchronizing the devices click Cancel to close the wizard 3 The Microsoft ActiveSync window displays the message Connected Microsoft ActiveSync n lota Sync CL Schedule Ge04802531187 Hide Details amp Information Type Status GeoExplorer 6000 Series User Guide 63 4 Connecting to an Office Computer 4 To transfer files between the computer and the handheld click Explore A Windows Explorer type window appears displaying files stored on the handheld Copy and paste files to other locations on the computer or from the computer to the handheld 5 To install software onto the handheld see Installing software onto the handheld page 64 6 To uninstall software from the handheld select Add Remove Programs from the Tools menu Clear the check box beside the program you want to remove and then click OK For more information refer to the ActiveSync Help X Tip If the GPS Pathfinder Office software is installed on the office computer you can configure the Connection Manager utility in the GPS Pathfinder Office software to automatically detect when you connect a GeoExplorer 6000 series handheld to the computer This enables you to automatically transfer data from the TerraSync software differentially correct the data and then export it to a GIS For more information refer to the GPS Pathfinder Office Software Help Installing software onto the handheld Before you begin refer to the in
131. munications Commission KCC This product conforms with the regulatory requirements of the Korean Communications Commission KCC thus satisfying the requirements for KCC Marking and sale within Korea FSSAs ea ol MSS ets HtssaAlsl sl KCC YA PARA Fag KCC U32 BAL SS SOW RAS SSSUC U52124 AS Trimble Navigation Ltd Gala GeoXT GeoXH MZ At Flextronics 3s Al ell B T 2402 2480 MHz WLAN 2412 2472 MHz IS B T 2402 2480 MHz WLAN 2412 2472 MHz B T 0 02 mW WLAN 10mW At Ea WPS le ZFSS AMEN Jedd Lnr se XK T xR T o0 JY gt r gt F f 00 Oli oe ot aS ef W 4 gt 0 gt Ad Ada AW AE B amp LC 00 Notice to Our European Union Customers For product recycling instructions and more information please go to www trimble com ev shtml and Electronic Equipment products that run on electrical power Call 31 497 53 24 30 and ask for the WEEE Associate Or mail a request for recycling instructions to Trimble Europe BV c o Menlo Worldwide Logistics Meerheide 45 5521 DZ Eersel NL Recycling in Europe To recycle Trimble WEEE Waste Electrical 5 Safety Information Radio use The Trimble GeoExplorer 6000 series handheld contains a Bluetooth radio and Wi Fi radio Some models also include a cellular modem radio In some situations you may be required to turn off the radios For example aviation authority regulations restrict the use of wireless transmission devices on boar
132. n see Differential GNSS explained page 80 The different models in the GeoExplorer 6000 series offer differing levels of DGNSS accuracy e The GeoXT handheld uses EVEREST multipath rejection technology to provide lt 1 meter accuracy with real time or lt 0 5 meters postprocessed differential correction e The GeoXH handheld uses EVEREST multipath rejection technology as well as H Star technology to provide 10 cm or better accuracy with either real time or postprocessed differential corrections GeoExplorer 6000 Series User Guide 71 5 Using the GNSS Receiver For more information refer to the datasheet for your model of handheld Where the DGNSS infrastructure does not meet 10 cm accuracy requirements for example the base station provides L1 corrections only or is at a distance greater than recommended the GeoXH handheld typically achieves submeter accuracy The list below identifies the most important settings and techniques that you can use in the field to improve the accuracy of your data Note This list assumes that you are using Trimble GNSS field software and lists items in order of most important to less important ib If you are using the TerraSync software to collect data use accuracy based logging For more information see page 72 Use real time differential corrections If you are using a GeoXH handheld and have access to dual frequency corrections from a VRS network use the corrections from the VRS
133. n installed and activated return the handheld to an authorized Trimble reseller Contact you Trimble reseller for more information on purchasing the Centimeter Output option Differential GNSS explained Use differential GNSS to correct errors in your collected data Differential GNSS DGNSS requires one or more additional receivers called base stations or reference stations which are located at known points Data collected at the base stations is used to determine GNSS measurement errors and compute corrections to these errors An unlimited number of mobile GNSS receivers called rovers collect GNSS data at unknown locations within the vicinity of the base station Errors common at both the base station and the rover receiver are corrected with DGNSS either in real time or during postprocessing Real time DGNSS In real time DGNSS the base station calculates and broadcasts the error for each satellite as each measurement is received enabling you to apply corrections while in the field and collect accurate GNSS data DGNSS corrections are available from a variety of public and commercial sources They can be generated and broadcast in real time by privately or self owned GNSS base stations or by a wide range of government agencies Real time DGNSS sources include external beacon and radio sources as well as Satellite Based Augmentation Systems SBAS such as WAAS in the US EGNOS in Europe MSAS in Japan and VRS networks SBAS and VRS
134. network For more information see page 74 Configure the GNSS settings for the receiver to use Smart Settings to increase the precision of your data and to minimize the effect of atmospheric interference and poor satellite geometry For more information see Using Smart Settings page 76 Connect to an external antenna if you have one For more information see page 77 Plan GNSS data collection around the times of the day when satellite geometry is best For more information see page 78 Accuracy settings and using accuracy based logging If you are using the TerraSync software use accuracy based logging to ensure that only GNSS positions that meet the specified estimated accuracy are logged GNSS positions that do not meet your accuracy requirements are not logged Note Accuracy estimates for streaming dynamic GNSS positions may not be as good as those for static GNSS positions 72 GeoExplorer 6000 Series User Guide Using the GNSS Receiver 5 To configure accuracy based logging in the TerraSync software 1 Inthe Setup section of the TerraSync software tap Ram oP x 12 57 Logging Settings The Logging Settings form appears re Accuracy Settings 2 Tap the Setup button below the Accuracy Aeara Valle Ror DERaWISuGing Settings field The Accuracy Settings form appears Horizontal M 3 Inthe Accuracy Value For Display Logging fields select the parameters that will be used to Postprocessed v Postpr
135. ng to an Office Computer 4 Installing ActiveSync technology A copy of ActiveSync technology is provided on the GeoExplorer 6000 Series Getting Started Disc Alternatively go to www imicrosoft com windowsmobile activesync default mspx to download the latest version from the Microsoft website Connecting the handheld to a computer To connect the GeoExplorer 6000 series handheld to a computer 1 Make sure that the handheld and the computer are switched on 2 Make sure you have installed the appropriate connection management software onto the computer see Connection management software page 60 3 To form a connection do one of the following Use the handheld s integrated Bluetooth radio to establish a wireless serial link to a Bluetooth enabled computer For more information see Connecting to an office computer using Bluetooth wireless technology page 109 Use a USB connection a Connect the USB data cable to the USB port on the handheld b Connect the other end of the USB data cable to a USB port on the computer When the handheld and the computer are connected you can manage the connection through a window that appears on the office computer See one of the following Managing the connection using the Windows Mobile Device Center page 61 Managing the connection using ActiveSync technology page 63 Managing the connection using the Windows Mobile Device Center 1 Connect the handheld to the computer see
136. nna that you have measured the height to 7 Tap OK to return to the Logging Settings form Planning a data collection session To maximize productivity plan GNSS data collection around the times of the day when satellite geometry is best The TerraSync software and the GPS Controller software both include a Plan section with an animated skyplot and DOP satellite geometry graph for your position for the next 12 hours In the Plan section you can check the planning skyplot as you play a session then use the timeline to zoom in on times when geometry is poor As you adjust GNSS settings the Plan section is updated so you can see the effect of different quality control settings Activating GNSS receiver option upgrades TerraSync e ex 1 03 Setup h17 U 25 Antenna Settings Antenna Height 2 000 m Confirm Type Part Number DOA Measure Height To Bottom of antenna mount MEINE TerraSync a x Gi 1 05 Pan I optond TETONA Heading Locked 01 00pm 05 00pm 09 00pm 01 00am The following GNSS receiver options are available for use with the GeoExplorer 6000 series handhelds e the Trimble Floodlight satellite shadow reduction technology which can increase the accuracy and likelihood of generating positions in environments affected by satellite shadow including canopy and near buildings e the NMEA Output option which enables you to use the GeoExplorer 6000 series handheld s integrated GNSS re
137. ns The handheld outputs the following NMEA messages by default GGA GLL GSA GSV RMC VTG ZDA All messages are output at a one second interval Outputs and receives TSIP messages TSIP Trimble Standard Interface Protocol is used by Trimble GNSS applications and is also supported by some other GNSS applications Receives real time correction messages If you are using an external correction source connected to COM1 or a Bluetooth port the corrections must be redirected to COM4 For more information see Using real time corrections from an external correction source page 5 Note NMEA messages can only be output if you have purchased and activated the NMEA Output option Note COM1 is a standard serial port that connects to external devices For more information see Connecting to other devices using the USB to serial converter page 117 Connecting to the COM port Details of how to configure different types of GNSS field software to connect to the GNSS COM port are as follows GPS field software GPS Controller TerraSync ArcPad with the GPScorrect extension ArcPad without the GPScorrect extension 68 GeoExplorer 6000 Series User Guide Configuration details Run GPS Controller The software automatically activates the integrated GNSS receiver on COM3 Run Terrasync The software automatically activates the integrated GNSS receiver on COM3 When the Trimble GPScorrect extension is installed the extens
138. nstalled you can use the software to configure settings such as GNSS real time correction and antenna settings You may also be able to use the software to connect to a real time correction source configure logging settings and collect features For more information refer to the rest of this chapter and the documentation for the GNSS field software Starting the GNSS field software Do one of the following e From the Home screen tap the GeoXH or GeoXT item then tap the GNSS Application Launcher item to launch the default GNSS field application e Tap Programs and then select the GNSS field software for example TerraSync When you first open any Trimble GNSS field software the Skyplot section is displayed Viewing available GNSS satellites TerraSync shade 12 55 en Use the graphical Skyplot section or the Satellite Info section in the installed Trimble GNSS field software to view detailed GPS and GLONASS information Note To receive signals from GNSS satellites the handheld must have a clear view of the sky GNSS positions may not always be available particularly in or near buildings in vehicles or under tree canopy er se WGS 1984 Filled black boxes represent satellites that the receiver gnss settings Spe webs is using to compute its current GNSS position Unfilled _ Min Elevation 5 white boxes represent satellites that the receiver is GeoExplorer 6000 Series User Guide 69
139. o a device that does not allow you to enter a passcode on the device or that does not automatically exchange a pre programmed passkey during pairing To set up a non paired connection to a Bluetooth enabled device 1 Make sure that the handheld and the Bluetooth device you want to connect to are within five meters of each other and that the Bluetooth radio in each device is turned on 2 Tap Settings Bluetooth GeoExplorer 6000 Series User Guide 97 6 Getting Connected 3 In the Devices tab tap Add new device The Bluetooth e X 6 GH 12 17 handheld searches for other Bluetooth devices PAN Devices gt Mode and displays them in the list Tap Add new device to search for other Bluetooth devices Tap on a device to modify its settings 4 Tap the name of the device you want to connect to and then tap Next Connected The Enter Passcode screen appears Add new device 5 Tap Next without entering a passcode 6 Ifprompted to add the device to your device list tap No 7 On the handheld tap the name of the other device The Partnership Settings screen appears 8 Ifrequired change the name of the device in the Display Name field 9 Select the service s you want to use with this device For example if you are connecting to aBluetooth enabled phone to connect to the Internet and receive real time corrections or download background maps select Dialup Networking DUN aserial device such
140. o access other power options or to reset the handheld press and hold for one second until the Power menu appears see Turning on and turning off the handheld page 32 or see Resetting the handheld page 34 Left and rightsoft By default these keys perform the same action as the left and right keys softkeys in the tile bar Alternatively program these keys to perform a selected action To program the keys use the Buttons control see Buttons page 49 Camera Control Press to activate and operate the camera see Chapter 7 Using the key Camera X Tip To lock the screen and handheld keys without turning off the handheld use the device lock option see Device lock page 51 The function of each LED is described below Key LED Description wa Battery status Battery charging is complete Battery is charging Battery level is critically low lt 5 remaining Battery fault GeoExplorer 6000 Series User Guide 25 2 Getting Started Key LED Description A ONSS receiver status 5 Receiver is on and GNSS positions are available 9 G gp Receiver is on but GNSS positions are not available a aq Receiver firmware loading updating m GNSS fault Wireless radio status A wireless radio is turned on Powering the handheld The GeoExplorer 6000 series handheld contains a removable rechargeable Lithium ion battery Note Charge the battery completely before using the handheld for th
141. o an external antenna The GeoExplorer 6000 series handheld has an internal antenna which is suitable for use in most conditions If you have a GeoXT handheld you can also connect a Tempest or an external patch antenna for when you work in a vehicle For improved yield under canopy you can use a Tempest antenna or a patch antenna with a ground plane If you have a GeoXH handheld you can connect an external Tornado antenna for improved accuracy when you collect data for postprocessing using H Star technology Configure antenna settings in the GNSS field software once you have connected the external antenna to the handheld To configure antenna settings in the TerraSync software 1 Inthe Setup section of the TerraSync software tap Logging Settings The Logging Settings form appears 2 Tap the Setup button form appears an next to the Antenna Height field The Antenna Settings GeoExplorer 6000 Series User Guide 77 5 78 Using the GNSS Receiver 3 In the Height field specify the height of the GNSS antenna that is connected to the GNSS position 4 Inthe Confirm field select how often the software will ask you to confirm the configured antenna height during data collection 5 Inthe Type field select the type of antenna that is connected The number in the Part Number field is automatically updated when you select the antenna type 6 Inthe Measure Height To field select the point on the ante
142. o oe hoe ae 4 ade Bee le eee oe oy be 130 Internal cellular modem connections 0 0 00 eee eee eee eee 130 GONSO TECCIVEL I DUCS 25 bo 4h ed Gee HOR EEEEOEEEERAADH EEE E GRE TED OEE EE OS 131 Realtime DONS ISSUCS g2st24e862444 608540464525 oe be Pete dees seats 132 Recommended GNSS settings for maximum precision and productivity 134 16 GeoExplorer 6000 Series User Guide Introduction In this chapter About the GeoExplorer 6000 series handheld What s in the box Accessories Use and care of the handheld Technical assistance CHAPTER The GeoExplorer 6000 Series User Guide describes how to set up and use the Trimble GeoExplorer 6000 series handheld The information in this guide supplements the information in the GeoExplorer 6000 Series Quick Start Guide which you received with the handheld This guide describes how to e use the Microsoft Windows Mobile version 6 5 operating system e use the handhelds integrated GNSS receiver e synchronize information between a computer and the handheld e exchange information between the handheld and other devices e connect to the Internet or to a computer network e use the integrated camera Even if you have used other Global Navigation Satellite System GNSS products before Trimble recommends that you spend some time reading this guide to learn about the special features of the product If you are not familiar with GNSS go to
143. oExplorer 6000 Series User Guide Getting Connected 6 aserial device such as a GeoBeacon receiver or a laser rangefinder select Serial Port acomputer to access ActiveSync technology or WMDC select ActiveSync Note Only ActiveSync shows on the Windows Mobile device Select ActiveSync even if you use the WMDC on the desktop computer Note For more information on the types of devices that the GeoExplorer 6000 series handheld can connect to and the supported Bluetooth services see Connecting to a Bluetooth device as a client page 92 11 Tap Save 12 Tap OK to close the Bluetooth application 13 Tap to close the Settings screen You have now created a partnership between the GeoExplorer 6000 handheld and the other Bluetooth enabled device so that they can communicate To start using the connection you must complete the configuration steps for that type of connection and then connect to the device For more information see e Connecting to a Bluetooth enabled phone for Internet access or real time corrections including VRS networks page 99 e Connecting to a Bluetooth enabled serial device page 106 e Connecting to an office computer using Bluetooth wireless technology page 109 Tip You only need to pair the handheld with a device before you connect to the device for the first time Setting up a connection to a non paired device Setting up a connection to a non paired device enables you to connect t
144. oblem with the battery or the temperature of the battery has exceeded the acceptable temperature range Solid green Charging is complete Note During normal charging the battery may become hotter than the maximum temperature allowed 40 C or 104 F If this happens charging is automatically suspended until the battery cools and then charging automatically restarts During this time the battery icon in the title bar shows to indicate that the handheld is running on external power It may take about one hour for the battery to cool Avoid keeping the battery at full charge at high temperatures For more information see Storing the handheld page 20 Note The life of the battery can be significantly shortened if power is constantly supplied to the handheld To avoid this issue connect the handheld to an external power source only when the battery requires charging Once fully charged disconnect the external power source and allow the battery to discharge through normal use Checking the level of battery power To check the level of battery power remaining at any time while the device is running tap the battery icon in the title bar of the Home screen and then tap ij in the pull down list The Power control appears displaying the Battery tab Power ex Ye ME 2 28 DVFS lt Battery gt Advanced When the handheld battery is recharging from an i Main battery Lilon external power source the battery icon in
145. obstructions Make sure that the Barometer seal located on the Barometer underside of the device is kept clear and is not covered by your fingers or any other covering Note Ifyou are using Trimble field software for example the TerraSync software make sure that you have selected the correct option for postprocessing data if your base station s provide corrections for GPS and GLONASS satellites select GPS GLONASS This affects the accuracy of the Predicted Postprocessed Accuracy PPA See Accuracy settings and using accuracy based logging page 72 To purchase the Floodlight technology option contact your Trimble reseller After purchase you must activate the Floodlight technology option on the receiver See Activating GNSS receiver option upgrades page 78 Ensuring the accuracy of your GNSS data GeoExplorer 6000 series handhelds are high performance GNSS receivers that calculate very accurate GNSS positions To correct errors in the collected data and to further improve the accuracy of the GNSS positions use differential GNSS Differential GNSS DGNSS requires one or more additional receivers called base stations or reference stations which are located at known points Data collected at the base stations is used to determine GNSS measurement errors and compute corrections to these errors These corrections are then applied to data collected in the field either in real time or during postprocessing For more informatio
146. ocessing Base Distance lt 25km_ M determine the estimated accuracy pore i Select whether to use the horizontal or Use Accuracy based Logging vertical accuracy of the current GNSS Apply Accuracy based Logging To positon D Co O E Select In the field to use the current estimated accuracy recommended if you are using a real time correction source or select Postprocessed to use the predicted estimated accuracy that will be achieved after the field data has been postprocessed 4 Ifyou selected Postprocessed d select the estimated distance to the base station that will be used for postprocessing from the Postprocessing Base Distance field If you will use more than one base station during H Star processing specify the estimated distance to the closest base station select the type of data that your base station s will provide to ensure that PPA Predicted Postprocessed Accuracy values can be predicted accurately If your base station s are providing corrections for GPS and GLONASS satellites select GPS GLONASS For base stations with only GPS satellite corrections select GPS If you dont know what base station data you will use or what base data is provided by your base stations select GPS 5 Set the Use Accuracy based Logging field to Yes The settings fields for accuracy based logging appear 6 Inthe Apply Accuracy based Logging To field select the feature types that you want to log only if the GNS
147. of the Windows Mobile operating m Pre installed programs poen m Entering information m Personalizing the handheld m Messaging GeoExplorer 6000 Series User Guide 41 3 Using the Windows Mobile Operating System Parts of the screen The main parts of the Home screen and the Start screen are shown below text calendar gey q 11 09 Title bar Contains status icons for important system functions GNSS Inactive Home screen Provides access to the key functions on your device Scroll and tap any item to open it GeoExplorer 11 09 x No Service e mail pictures favorites DED Start button Tap to open the Start screen where you can access programs and system controls p4 Start screen Tap any item on the menu to open it Settings Lock device Tap to lock the screen Once locked you have multiple points of unlock entry depending on the current status Pull down list Tap anywhere on the title bar to open the title bar pull down list where you can access connectivity controls the Wireless Manager battery information time and date settings and volume 42 GeoExplorer 6000 Series User Guide Tile bar Contains touchable tiles providing access to applications menus and notifications Calendar tr Internet Explorer lt Pictures amp Yideos Connectivity icons Tap either icon to access the Wireless Manager Calendar Using the Windows Mobile O
148. oftware from a computer solely to download the Software to one Device In no event shall the installation Software be used to download the Software onto more than one Device A license for the Software may not be shared or used concurrently on different computers or Devices 1 2 Scope of License This EULA only gives you some rights to use the Software Trimble and Microsoft reserve all other rights Unless applicable law gives you more rights despite this limitation you may use the Software only as expressly permitted in this EULA In doing so you must comply with any technical limitations in the Software that allow you to use it only in certain ways Except as expressly provided in this EULA rights to access the Software on this Device do not give you any right to implement Microsoft patents or other Microsoft intellectual property in software or devices that access this device You may use remote access technologies in the software such as Remote Desktop Mobile to access the Software remotely from a computer or server You are responsible for obtaining any licenses required for use of the protocols to access other software 1 3 Proof of License If you acquired the Software on the Device or ona disc or other media a genuine Certificate of Authenticity label with a genuine copy of the Software identifies licensed software To be valid this label must be affixed to the Device or included on or in the software packaging If you receive the labe
149. on to Trimble s standard specifications for its products iii the unauthorized installation modification or use of the Product iv damage caused by accident lightning or other electrical discharge fresh or salt water immersion or spray outside of Product specifications or exposure to environmental conditions for which the Product is not intended v normal wear and tear on consumable parts e g batteries or vi cosmetic damage Trimble does not warrant or guarantee the results obtained through the use of the Product or Software or that software components will operate error free NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY CAPABLE OF TRACKING SATELLITE SIGNALS FROM SATELLITE BASED AUGMENTATION SYSTEMS SBAS WAAS EGNOS AND MSAS OMNISTAR GPS MODERNIZED GPS OR GLONASS SATELLITES OR FROM IALA BEACON SOURCES TRIMBLE IS NOT RESPONSIBLE FOR THE OPERATION OR FAILURE OF OPERATION OF ANY SATELLITE BASED POSITIONING SYSTEM OR THE AVAILABILITY OF ANY SATELLITE BASED POSITIONING SIGNALS THE FOREGOING LIMITED WARRANTY TERMS STATE TRIMBLES ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDIES RELATING TO THE TRIMBLE PRODUCT EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN THE PRODUCT AND ACCOMPANYING DOCUMENTATION AND MATERIALS ARE PROVIDED AS IS AND WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND BY EITHER TRIMBLE OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION PRODUCTION INSTALLATION OR DISTRIBUTION INCLUDING BUT NOT L
150. onal USB to serial converter or to a Bluetooth port on the handheld The Bluetooth external correction source is more than ten meters from the handheld or is obstructed Move the devices closer together in a direct line of sight to re connect In the Real time Settings section of the GNSS field software select the COM port that the real time source is connected to Change the port settings to match those used by the external source You cannot use real time corrections until the GNSS receiver is Computing positions In the GNSS field software make sure that the integrated GNSS receiver is activated enough satellites are available and that the satellite geometry PDOP is good enough to compute positions If the SBAS status is Waiting the integrated GNSS receiver may incorrectly change the status of the preferred real time choice to Waiting as well To avoid this select Wait for real time or Use uncorrected GNSS as your second choice GeoExplorer 6000 Series User Guide 133 8 Troubleshooting Recommended GNSS settings for maximum precision and productivity The following table lists some of the factors that affect the precision of your data and describes how to minimize the effect of atmospheric interference and poor satellite geometry Factor Satellite shadow Multipath Weak satellite signals Poor satellite geometry Description Satellite shadow is when the line of sight between the GNSS receiver and s
151. ore information go to www trimble com gpscorrect_ts asp click Support Notes and then search for the Mapping and GIS Product Compatibility List Support Note To install the GPScorrect extension run the downloaded setup file Detailed installation instructions are provided in the Trimble GPScorrect Extension Getting Started Guide GPS Controller software You can install version 2 40 or later of the GPS Controller software on a GeoExplorer 6000 series handheld Use the software to configure and monitor the status of the internal GNSS receiver and to configure GNSS output settings for third party GNSS applications To install the GPS Controller software go to www trimble com support shtml Click GPS Controller and then click Downloads Click the link for the version you want to install and then follow the instructions in the Installation wizard 66 GeoExplorer 6000 Series User Guide Using the GNSS Receiver 5 GNSS Connector software You can install the GNSS Connector software on a GeoExplorer 6000 series handheld Use the software to specify how the integrated GNSS receiver communicates with equipment that is connected to one of the handheld s external communications ports To install the GNSS Connector software 1 Goto http www trimble com mappingGIS geoxh6000 aspx click the Technical Support tab then click Downloads GeoExplorer 6000 series 2 Click the GNSS Connector CAB File to download it 3 Copy the CAB file to you
152. ote Before you try to form a Bluetooth connection from the GeoExplorer 6000 series handheld to the office computer you must correctly configure the Bluetooth host serial port and ActiveSync technology on the office computer 3 4 On the handheld tap KW Settings Bluetooth In the Devices tab tap Add new device The handheld searches for other Bluetooth devices and displays them in the list Tap the name of the computer you want to connect to and then tap Next When prompted enter a passcode of your choice that you will easily remember on the handheld Enter the same passcode on the office computer On the handheld select the ActiveSync check box in the list of services provided by the computer and then tap Finish Note The checkbox on the handheld still shows ActiveSync even if the office computer is running the Windows 7 or Windows Vista operating system and you are using the WMDC 10 ll You have now created a partnership between the GeoExplorer 6000 series handheld and the office computer so that they can communicate Tap OK to close the Bluetooth application Tap gg to close the Settings screen To connect go to Step 2 below Note that the check box on the handheld shows ActiveSync even if the office computer is running the Windows 7 or Windows Vista operating system and you are using the WMDC GeoExplorer 6000 Series User Guide 111 6 Getting Connected Step 2 Connecting to ActiveSync using Bluetoo
153. oth radio from within the Bluetooth application page 86 84 GeoExplorer 6000 Series User Guide Getting Connected 6 To make the GeoExplorer 6000 series handheld visible to other Bluetooth enabled devices and enable them to connect see Making the handheld visible discoverable to other Bluetooth devices page 86 Using the Wireless Manager You can use the Wireless Manager application to turn on and turn off the GeoExplorer 6000 series handheld s Wi Fi Bluetooth and or cellular modem radio You can turn on and turn off all radios at the same time or control each radio individually To open the Wireless Manager do one of the following e Tap the title bar tap any of the radio icons and then tap Wireless Manager e Tap Settings Connections Wireless Manager Turn on the Wi Fi Bluetooth and or cellular modem radio to be able to connect to other devices or networks Turn off the Wi Fi Bluetooth and or cellular modem radio to prevent the handheld from sending or receiving wireless signals Tip To conserve power turn off the Wi Fi Bluetooth and or cellular modem radio when not in use CAUTION The Bluetooth and cellular modem radios remain active even when the device is in Suspend mode Turn off the radios when they are not in use To turn on or turn off the radios using the Wireless Manager 1 Open the Wireless Manager see above Wireless Manager Y 4 5 36 2 Do one of the following Tap A
154. ped with wireless cellular modem radios have been designed and manufactured to meet safety requirements for limiting exposure to radio waves When used in accordance with the instructions set forth in this manual the equipment has been independently verified to not exceed the emission limits for safe exposure to radio frequency RF energy as specified by the Federal Communications Commission of the U S Government in 47 CFR 2 1093 These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies The standards include a substantial safety margin designed to assure the safety of all persons regardless of age and health AC adaptor safety To charge the handhelds battery use the international adaptor kit provided with the GeoExplorer 6000 series handheld see Powering the handheld page 26 A N WARNING To use AC adaptors safely Use only the AC adaptor intended for the GeoExplorer 6000 series handheld Using any other AC adaptor can damage the handheld and may void your warranty Do not use the AC adaptor with any other product Make certain that the input voltage on the adaptor matches the voltage and frequency in your location Make certain that the adaptor has prongs compatible with your outlets Do not us
155. perating System 3 Status indicators Status indicators that appear in the title bar at the top of the screen are as follows Battery status indicators Icon Description Battery has full charge Battery has high charge Battery has medium charge Battery has low charge Battery has very low charge 20 or less E Coed Cd EN E Battery charging using external power The battery status icon on the title bar of the Home screen or the Start screen shows the status of the battery charge Tap the title bar and then on the pull down list tap the ball icon to access the Power control dialog See Checking the level of battery power page 29 Speaker status indicators Icon Description 4 me Speaker is on Ee Speaker is off The speaker status icon on the title bar of the Home screen or the Start screen shows the status of the speaker Tap the title bar and then on the pull down list tap the 8 icon to adjust the volume and to turn the speaker on or off GeoExplorer 6000 Series User Guide 43 3 Using the Windows Mobile Operating System Network and modem status indicators Icon Connected to ActiveSync or the Windows Mobile Device Center WMDC on a 2 computer Connected to a Bluetooth enabled phone E Disconnected from ActiveSync or WMDC Disconnected from a Bluetooth enabled phone Wi Fi radio is on Wi Fi is detected Connected to a wireless network Maximum cellular modem signal strength No cellular modem signal Cellula
156. ploitation est autoris e aux deux conditions suivantes 1 lappareil ne doit pas produire de brouillage et 2 l utilisateur de lappareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le onctionnement requirements for CE Marking and C 4 0 6 8 2 O sale within the European Economic Area EEA It is classified and marked as being Class 2 Radio Equipment under 2000 299 EC as Bluetooth and wireless LAN approvals are country specific Please consult your local distributor for more information EU Restrictions for Use in the 2 4GHz band This device may be operated indoors or outdoors in all countries of the European Community using the 2 4GHz band Channels 1 13 except where noted below Europe This product has been tested and found to comply with all In France outdoor operation is only permitted using the 2 4 2 454 GHz band Channels 1 7 In Italy the end user must apply for a license from the national spectrum authority to operate this device outdoors In Norway this unit may not be operated within 20 km of Ny Alesund The Trimble GeoExplorer 6000 series has Bluetooth and wireless LAN approval in most EU countries and satisfies the requirements for Radio and Telecommunication Terminal Equipment specified by European Council Directive 1999 5 EC These requirements provide reasonable protection against harmful interference when the equipment
157. proximity The AC adapter is a highly efficient Energy Star V adapter which is required to operate at very low audible duty cycles when unloaded so as not to waste energy The handheld was left in Suspend mode or was left fully charged for a long duration The handheld was left in suspend mode with a wireless radio turned on The charge level of the battery drops when the handheld is turned off 124 GeoExplorer 6000 Series User Guide Solution Recharge or swap the battery see page 28 or page 30 Press the Power button to turn on the handheld Reset the handheld see Resetting the handheld page 34 Do one or all of the following e Turn off the integrated radios before charging the handheld e Suspend the handheld before charging e Remove the handheld from any external heat sources for example sunlight The handheld will automatically start charging again when the internal temperature has dropped below the range for charging the battery Recharge the battery see page 26 Once the battery level is above 0 the battery power percentage bar reappears Tap Settings System Power Battery to view the level of power remaining in the battery There is no safety issue related to the faint noise In the event of a disconcerting noise disconnect the mains adapter from the mains as soon as a battery charge is complete Before storing the handheld completely shut down the handheld see Turning on and
158. r Services offered by the phone can be unchecked 10 Tap Finish on the right softkey GeoExplorer 6000 Series User Guide 105 6 Getting Connected Step 2 Enabling the PAN connection 1 Inthe PAN tab of the Bluetooth application on the handheld select the cellular phone you just connected to from the drop down list and then select the Enable PAN connection check box The status field in the PAN tab shows the progress of the connection Wait until the Status field shows Connected 2 Check the cellular phone and if prompted allow the connection The E or K4 icon in the title bar changes to 2 3 Tap OK to close the Bluetooth application 4 Tap to close the Settings screen 5 Ifthe Establishing Connection popup message appears on the handheld select The Internet or work via a VPN or Work and then tap Connect or dismiss the message 6 Start using the program you want to use for example Windows Explorer Mobile or Internet Explorer To check the connection status at any time tap the title bar and then on the pull down list tap the required connection icon The Bluetooth PAN connection appears as Network Card To end the connection at any time tap Settings Bluetooth In the PAN tab clear the Enable PAN connection check box Connecting to a Bluetooth enabled serial device Use Bluetooth wireless technology to receive data from a Bluetooth enabled serial device such as a GeoBeacon receiver or a laser rangef
159. r handheld 4 On the handheld locate and then tap the CAB file and then follow the on screen instructions to run the installer Other GNSS field applications If you have purchased and activated the NMEA Output option you can also use the GeoExplorer 6000 series handheld with any GNSS field software that accepts NMEA messages Note A GeoExplorer 6000 series GeoXH handheld with the Centimeter Output upgrade option applied can only be used with the TerraSync Centimeter edition software Other Trimble field applications will not be able to connect to the receiver For more information see Activating the Centimeter Output option page 80 Configuring the GNSS field software to connect to the receiver The first time you use GNSS field software on the handheld you may need to specify which GNSS COM port to connect to GNSS COM ports The integrated GNSS receiver has three COM ports for communicating with software on the handheld and with external devices Two ports are for outputting GNSS data and one port is for receiving real time corrections into the receiver GeoExplorer 6000 Series User Guide 67 5 Using the GNSS Receiver To use GNSS open the appropriate GNSS COM port The type of communication used for each port is described below Port Function COM2 NMEA COM3 TSIP COM4 Real time corrections Description Outputs NMEA 0183 messages NMEA is a standard GNSS communication protocol used by many GNSS applicatio
160. r modem is turned off No cellular service Searching for cellular modem service Data is transferring using the cellular modem No SIM card UMTS network is available E E a Ea Sa UMTS network is connecting dai UMTS connection is active 3G network is available Analog network is available EDGE network is available EDGE network is connecting EDGE connection is active GPRS network is available GPRS network is connecting GPSR connection Is active HSDPA network is available HSDPA network is connecting eas Ea ES Pal gt E25 P Bd ES S HSDPA connection is active The network and modem status icons on the title bar of the Home screen or the Start screen show the status of each radio Tap the title bar and then on the pull down list tap the jor J icon In the Connectivity or Phone dialog select Wireless Manager and turn on or turn off the radio 44 GeoExplorer 6000 Series User Guide Using the Windows Mobile Operating System 3 Pre installed programs Programs that are pre installed on the GeoExplorer 6000 series handheld are as follows Program Function Activesync Synchronize information between the handheld and a computer Adobe Reader LE Read PDF documents Alarms Set alarms Calculator Perform basic arithmetic functions Calendar Keep track of appointments and arrange meetings T Contacts Keep track of your friends and colleagues File Explorer View and manage files
161. re and if possible move to a different location Wide Area Augmentation System WAAS satellites are tracked in the Continental United States including Alaska and in southern parts of Canada European Geostationary Navigation Overlay Service EGNOS satellites are tracked in Europe MTSAT Satellite based Augmentation System MSAS satellites are tracked in Japan If you have selected satellites that are not available at your location you cannot use SBAS corrections 1 To download the software go to www trimble com support shtml click the link for your receiver type GeoXH or GeoXT click Downloads click GeoExplorer 6000 Series and then click SBAS NI 2 To specify the satellites you want the receiver to track or to ignore select the Custom option in the Tracking Mode field in the Integrated SBAS Settings form of the Trimble GNSS field software Problem The handheld is not receiving real time corrections from the external real time correction source Cause There is no physical connection to the external source There is no Bluetooth wireless connection to the external source The external source is incorrectly connected to the real time COM port The port settings are incorrect No GNSS positions are available Integrated SBAS is selected as the second choice source of real time corrections Troubleshooting 8 Solution Connect the external real time correction source to COM1 using the opti
162. ready the red LED turns off and the battery can be safely swapped Generally the red LED will only display for half a second or less but it may display for three seconds or so Do not remove the existing battery until the red LED turns off Removing the battery when the red LED warning light is still on will make the device reboot when the battery is swapped Do not remove the existing battery until the red LED turns off 4 Remove the old battery by pinching the battery latches together until the battery is ejected Slide the battery out A N CAUTION The handheld is not sealed from water and dust when the battery is removed Trimble recommends only removing the battery for short periods of time and only removing the battery indoors or from inside the protection of a vehicle 5 Insert the new battery see Inserting the battery page 27 30 GeoExplorer 6000 Series User Guide Getting Started 2 A N CAUTION The handheld has enough power to keep the device running for approximately 30 seconds with the battery removed If the power drains before the battery is restored the device will shut down Trimble recommends saving open files before swapping the battery 6 Press the Power key to resume your session Conserving power Although the handheld battery can operate for a full day without recharging Trimble recommends that you do the following to reduce power consumption e Set the handheld to automatically turn off when idle
163. rechargeable Lithium ion battery only in strict accordance with the instructions Charging or using the battery in unauthorized equipment can cause an explosion or fire and can result in personal injury and or equipment damage To prevent injury or damage Do not charge or use the battery if it appears to be damaged or leaking Charge the Lithium ion battery only in a Trimble product that is specified to charge it Be sure to follow all instructions that are provided with the battery charger Discontinue charging a battery that gives off extreme heat or a burning odor Use the battery only in Trimble equipment that is specified to use it Use the battery only for its intended use and according to the instructions in the product documentation Storage card use A A The GeoExplorer 6000 series handheld provides a storage card slot providing an alternative storage location to the storage memory in the handheld WARNING Static electricity can harm electronic components inside your handheld To prevent static damage Discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal surface WARNING The presence of any dust or moisture in the storage card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the storage card slot Make
164. rections The GeoExplorer 6000 series handheld has an integrated receiver that uses Satellite Based Augmentation Systems SBAS correction messages to improve the accuracy and integrity of GNSS data The default SBAS tracking mode is Auto In Auto mode the receiver tracks or locks onto the most powerful satellite signal The GNSS receiver can track two SBAS satellites at the same time in Auto or Custom mode It uses corrections from only one SBAS satellite at a time but tracking two satellites can improve the availability of SBAS real time corrections For example if you are working in environments where obstacles may block the direct line of sight to the SBAS satellite there is less chance of signal loss if you are tracking more than one SBAS satellite Note To turn off multiple SBAS satellite tracking select Custom mode and then deselect all other SBAS satellites except for the satellite you want to track The receiver tracks SBAS satellites according to your geographical location e Wide Area Augmentation System WAAS satellites are tracked in the Continental United States including Alaska and parts of Canada and Mexico e European Geostationary Navigation Overlay Service EGNOS satellites are tracked in Europe e MTSAT Satellite based Augmentation System MSAS satellites are tracked in Japan 74 GeoExplorer 6000 Series User Guide Using the GNSS Receiver 5 To use SBAS corrections 1 Inthe Setup section of the GNS
165. rimble recommends that you regularly copy important data to an office computer For more information see Connecting to an Office Computer page 59 Storage cards As an alternative to internal storage you can save data to a removable card Use either an SD or SDHC high capacity SD card to securely transfer data to and from another device that supports SD or SDHC cards Note The GeoExplorer 6000 series handheld does not support SDIO Secure Digital Input Output or SDXC Secure Digital Extended Capacity cards WARNING The presence of any dust or moisture in the storage card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the storage card slot Make certain that the storage card slot door is attached correctly when you are using the handheld outdoors When inserting or removing a storage card place the handheld on a dust free indoor surface WARNING Static electricity can harm electronic components inside the handheld To prevent static damage Discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal surface 36 GeoExplorer 6000 Series User Guide Getting Started 2 To insert an SD or SDHC card 1 Place the handheld on a dust free indoor surface 2 Flip open the storage card slot door on the side of the handheld 3 Insert th
166. rol Panel Windows Mobile Device Center The Connection Settings dialog appears amp Connection Settings Waiting for device to connect Wf Allow USB connections This computer is connected to Automatic W Allow automatic device authentication W Allow data connections on device when connected to PC b Select the Allow connections to one of the following check box c From the list select Bluetooth and then click OK e the Windows XP operating system a From the Bluetooth user interface on the office computer identify the virtual COM port of the of the host Bluetooth Serial Port or Local Service and ensure that this is enabled In this example the virtual COM port is COMS5 b Start the ActiveSync technology on the office computer c Select File Connection Settings 110 GeoExplorer 6000 Series User Guide Getting Connected 6 The Connection Settings dialog appears Connection Settings Connect Waiting for device to connect jw Show status icon in taskbar W Allow LUISE connections jw Allow connections to one of the Following COME bi This computer is connected to Automatic ball i Open Activesync when my device connects Allow wireless connection on device when connected to the desktop we ceel d Select the Allow connections to one of the following check box e From the list select the COM port that you selected in Step a and then click OK N
167. rom the Device on CD ROM disc s or via web download or other means and labeled For Upgrade Purposes Only you may i install and use one 1 copy of such component s on the computer s you use to exchange data with the Device as a replacement copy for the existing Companion CD component s 1 16 Copyright All title and copyrights in and to the Software including but not limited to any images photographs animations video audio music text and applets incorporated into the Software the accompanying printed materials and any copies of the Software are owned by Trimble or Microsoft including Microsoft Corporation and their respective suppliers You may not copy the printed materials accompanying the Software All title and intellectual property rights in and to the content which may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties This EULA grants you no rights to use such content You shall not remove cover or alter any of Trimble patent copyright or trademark notices placed upon embedded in or displayed by the Software or on its packaging and related materials All rights not specifically granted in this EULA are reserved by Trimble Microsoft and their respective suppliers 1 17 US Government Restricted Rights The Software is provided with RESTRICTED RIGHTS Use duplication or
168. rranty does not apply to Fixes Minor Updates or Major Upgrades of the Software after expiration of the twelve 12 month limited warranty period all of which are provided AS IS and without warranty unless otherwise specified in writing by Trimble Because the Software is inherently complex and may not be completely free of nonconformities defects or errors you are advised to verify your work Trimble does not warrant that the Software will operate error free or uninterrupted will meet your needs or expectations or that all nonconformities can or will be corrected 2 2 Software Fixes During the limited warranty period described in section 2 1 above you will be entitled to receive such Fixes to the Product Software that Trimble releases and makes commercially available and for which it does not charge separately subject to the procedures for delivery to purchasers of Trimble products generally If you have purchased the Product from an authorized Trimble dealer rather than from Trimble directly Trimble may at its option forward the software Fix to the Trimble dealer for final distribution to you Minor Updates Major Upgrades new products or substantially new software releases as identified by Trimble are expressly excluded from this update process and limited warranty Receipt of Software Fixes or other enhancements shall not serve to extend the limited warranty period For purposes of this warranty the following definitions shal
169. rt screen and then tap fif e Tap W Settings Power Tap the Battery tab to check the battery level see Checking the level of battery power page 29 Tap the Advanced tab to set the time before the handheld turns off when idle see Suspend mode page 32 Sounds and notifications Use the Sounds amp Notifications control to set preferences for the speaker volume and system sounds To open the Sounds amp Notifications control e Tap W Settings Sounds amp Notifications To turn on or turn off sounds Sounds amp Notificat Q gt X 4 4 6 19 1 Tap the Sounds tab Notificatio Sounds gt Notificatio Enable sounds for 2 Select or clear the check boxes to enable or disable categories of sounds Events warnings system events Programs 3 If you select the Screen taps or Hardware buttons ee ee A check boxes select the Soft or Loud option to Ds creen taps control the volume of the sounds P 4 Tap OK E Hardware buttons You can use predefined schemes to customize sounds or you can create your own sound schemes To specify a sound scheme Sounds amp Notificat gt X GC 6 20 1 Tap the Notifications tab Sounds lt Notifications gt Sounds 2 From the Event drop down list select an event eminders 3 Select the type of notification you want to receive Bann for that event E Repeat 4 Tap OK 52 GeoExplorer 6000 Series User Guide Using the Window
170. s Mobile Operating System 3 Screen Use the Screen control to align the touch screen or to change the appearance of text on the screen To open the Screen control e Tap Settings System Screen To change the screen settings Screen Q oP xX 6 06 Text Size lt General gt ClearType 1 Tap the General tab Orientation 2 To change the orientation of the screen select an Portrait option in the Orientation group C usndexpeigheinded 3 To start the alignment sequence for the touch screen tap Align Screen O Landscape left handed Align Screen Align the screen if it is not responding 4 Tap OK accurately to stylus taps Align S Note To align the screen at any time press and hold the a Power button for 1 second until the Power menu appears and then tap Using ClearType font smoothing can make text easier to read on the screen To enable ClearType 1 Tap the ClearType tab and then select the Enable ClearType check box 2 Tap OK To change the size of text on screen aca Q ut X 46 a 6 06 1 Tap the Text Size tab Cleartype Text Size General Adjust the text size to see more content or 2 Tap and drag the slider control to the left to make _ increase the readability in many programs text smaller or to the right to make text larger eee Largest The example text below the slider shows how the Example text will appear on screen Til get back to you 3 Tap OK Bac
171. s User Guide 81 5 Using the GNSS Receiver Note If you are using a Bluetooth port ensure that the Bluetooth radio is on and the handheld is visible to other devices Use the GNSS Connector software to configure NMEA output to Bluetooth COMY which is the pre defined Bluetooth Host Serial Port For more information see Providing Bluetooth services as a host page 94 The connections that you create in the GNSS Connector software are active only while the software is running Connections created by the GNSS Connector end when you exit the software Configuring NMEA output You can use the GeoExplorer 6000 series handheld s integrated GNSS receiver with any GNSS field software that accepts NMEA messages if you have purchased the NMEA output option and it has been activated on the handheld To configure the NMEA data output settings use the GPS Controller 2 YX amp 1 12 GPS Controller software The software is provided free from the Trimble website For more information see GPS NMEA Output Settings ja Controller software page 66 EE r To configure NMEA data output Baud Rate d 1 Inthe GNSS Settings form set the NMEA Output ee field to On aus Parity 2 Tap the Setup button that appears next to the General NMEA Output field The NMEA Output Settings C ALM appears GGA 3 Configure the NMEA message output settings amp A N CAUTION NMEA standard dictates that a baud rate of 4800bps should be
172. s a Bluetooth client are Service Description Dialup Networking Connects the handheld to a cellular phone or modem for dial up DUN network or Internet access Personal Area Connects to Bluetooth network access points or phones that support the Networking PAN Personal Area Network Network Access PAN profile The PAN service is only available on GeoExplorer 6000 series handheld models which do not have an integrated modem Serial Port Emulates an RS 232 serial COM port on the handheld ActiveSync Enables an ActiveSync connection to a computer This service is also used for office computers which have the WMDC installed Input Device HID Connects the handheld to a physical input device such as a keyboard Wireless Stereo Connects to Bluetooth A2DP Advanced Audio Distribution Profile headphones A client can connect to a number of different services provided by different hosts The number of active connections at any one time affects the speed of the connections Figure 1 shows the handheld connected to different types of host devices using Bluetooth wireless technology 92 GeoExplorer 6000 Series User Guide Getting Connected 6 k Cell Phone Bluetooth headphones Wireless keyboard or input devia Laser rangefinder barcode scanner Laptop PC Figure 1 GeoExplorer 6000 series handheld Bluetooth client connections In Figure 6 1 the dashed arrows indicate the client device that is the GeoExplorer 600
173. s the main features of the GeoExplorer 6000 series handheld and provides the information you need to get up and running with the handheld GeoExplorer 6000 Series User Guide 23 2 Getting Started Parts of the GeoExplorer 6000 series handheld The following diagrams show the main parts of the handheld GNSS receiver External GNSS antenna connector Touch panel display SIM card door Application keys Notification LEDs Microphone USB door Power key Figure 2 1 24 GeoExplorer 6000 Series User Guide Camera Lens Identification label zone Barometer Ambient light sensor SD card door Camera control Yia nyard tether Stylus Removable battery Parts of the GeoExplorer 6000 series handheld Getting Started 2 Keypad buttons The GeoExplorer 6000 series handheld has a keypad for fast easy access to common actions LEDs provide visual notifications of system events Left softkey Right softkey LEDs Power GNSS Radios Camera control key Microphone Speaker Power key Figure 2 1 GeoExplorer 6000 series handheld keypad area l SIM card slot only available on configurations that include the optional 3 5G cellular modem 2 Microphone not available on configurations for sale in China The function of each key is described below Key Description Power key Press briefly less than one second to turn on the handeld or to turn off the handheld put it into Suspend mode T
174. screen and the order in which they appear To use the default Home screen view fais OFX de 1 25 l Tap Settings Home Appearance lt Items gt Appearance Checked items appear on the Home screen 2 Tap the Items tab 3 Select the Windows Default check box 4 Tap OK Windows Default E Date E Wireless screen Getting Started To customise the items which appear on the Home 1 Tap Settings Home Home timeout v 2 Tap the Items tab 3 Select or clear the check boxes to show or hide the Home screen items 50 GeoExplorer 6000 Series User Guide Using the Windows Mobile Operating System 3 4 Use the Move Up and Move Down buttons to change where the selected item appears on the Home screen 5 Tap OK Set the time and date 1 Onthe Home screen tap the clock item or tap the Qa FiFarre er title bar and then on the pull down list tap the Alarms Time Aams clock icon The Clock amp Alarms screen appears Time Zone 2 Tap the Time tab GMT 12 New zeaend Date 3 Inthe Time Zone field select the required time 2 4 25 72010 WwW zone from the dropdown list Ime 4 Inthe Date field tap the down arrow and then 11 25 29 AM a wv select the correct date Tip On the calendar which appears tap on the month or year to select the required value 5 Inthe Time field tap in turn the hour minute and second values and then tap the up or down arrows to s
175. se the total number of satellites that the receiver can track and reduce the risk of poor satellite geometry affecting your solution See Activating GNSS receiver option upgrades page 78 Factor Satellite elevation Occupationtime at a point Description When a satellite is low on the horizon satellite signals must travel farther through the atmosphere This results in a lower signal strength and delayed reception by the GNSS receiver which can cause errors in calculating the position Occupation time is the time spent at a point logging GNSS positions Troubleshooting 8 To maximize precision and productivity Use smart settings with Trimble field software to allow the receiver to determine maximum precision positions regardless of available satellite elevation See Using Smart Settings page 76 Activate the Floodlight technolgy option on your handheld to increase the total number of satellites that the receiver can track and the likelihood of being able to track more satellites at higher elevation See Activating GNSS receiver option upgrades page 78 For point features remain at the feature and log a number of GNSS positions to obtain an averaged position When collecting line and area features collect them using averaged vertices GeoExplorer 6000 Series User Guide 135 8 Troubleshooting 136 GeoExplorer 6000 Series User Guide NORTH amp SOUTH AMERICA Trimble Navigation Limited 10355 Westmoor
176. stallation instructions provided with the software Some software installations are specifically designed to run on a device powered by a Windows Mobile operating system To install software that has a Windows Mobile installation setup 1 Connect the handheld to a computer see page 61 2 Copy the installation files to a folder on the handheld 3 Browse to the folder on the handheld Tap and hold the installation setup file and then select Run 4 Ifprompted after installation perform a soft reset of the handheld see page 34 To install software that is provided on a CD or as an installation setup that runs on an office computer l Connect the handheld to a computer see page 61 2 Ifthe software is provided on a CD insert the software CD into the office computer Run the installation setup 4 Ifprompted select the install option for a device powered by a Windows Mobile operating system Once the software is installed on the computer it is automatically transferred to the handheld Note Ifa storage card is inserted in the handheld the card appears as an installation location option Trimble recommends that you install software to the handhelds internal storage not to a storage card If you install software to a card and then remove the card from the handheld the software will not be available for use 5 Ifprompted after installation perform a soft reset of the handheld see page 34 64 GeoExplorer 6000 Series
177. t 1 Disconnect the USB data cable as the handheld prioritizes a USB connection over a Wi Fi connection 2 Bring the handheld within range of the network or access point 90 GeoExplorer 6000 Series User Guide Getting Connected 6 When a Wi Fi connectionis detected the access point icon k4 appears on the title bar and a notification message appears on the left softkey If the access point icon or the notification does not appear use the Wireless Manager to turn off and then turn back on the Wi Fi radio When the Wi Fi radio is turned on any networks or access points within range are detected and the icon and notification appear 3 Tap the access point icon on the title bar or tap Notification on the left softkey A popup message shows the available networks 4 Select the network you want to connect to and then tap OK on the left softkey 5 Select The Internet or work via a VPN or Work and then tap Connect on the left softkey 6 Ifa Network Log On screen appears enter your user name password and domain information and then tap OK on the left softkey When the handheld is connected to the network or access point the Wi Fi connected icon appears in the title bar 7 Start using the program you want to use for example Windows Explorer Mobile or Internet Explorer Note To disconnect from the network or an access point at any time turn off the handheld wireless radio To do this tap title bar tap the Connecti
178. th radio to connect to a Bluetooth enabled cellular phone Use this type of connection to access a VRS network or other correction source from the Internet a background map server or for Internet and email access Note Some cellular phones support the Bluetooth PAN Personal Area Networking service as well as the Bluetooth DUN Dialup Networking service Because DUN connections are more common this section assumes you are making a dialup network connection with the Bluetooth enabled phone For information on setting up a PAN service see Connecting to the Internet through a Bluetooth enabled phone using the Bluetooth PAN profile page 104 To connect to a Bluetooth enabled phone using a Bluetooth DUN Dialup Networking connection you must 1 Connect the GeoExplorer 6000 series handheld to a Bluetooth enabled phone and then configure the connection to the dialup network 2 Connect to the Internet using the dialup network 3 Configure the software to use the connection For example you must configure the GNSS field software to use real time corrections or map data received from the Internet source or you must set up the Messaging application to send and receive email using the connection Note Before you begin the steps below Trimble recommends that you confirm that the phone can access the Internet directly If necessary contact the cellular phone provider and confirm whether you must enter a user name password and domain d
179. th wireless technology if On the GeoExplorer 6000 series handheld tap ActiveSync Note Only ActiveSync shows on the Windows Mobile device Select ActiveSync even if you use the WMDC on the desktop computer 2 Tap Menu and then select Connect via Bluetooth On the GeoExplorer handheld a message box shows the status of the connection as it is made When the connection to the office computer is successful you are returned to the ActiveSync application on the handheld Tap to close The connectivity icon in the status bar shows or if WLAN is connected To check the status of the connection tap the title bar and then tap the connectivity icon on the pull down list To disconnect tap KJ ActiveSync on the handheld and then select Menu Disconnect Outputting GNSS data to other devices using Bluetooth wireless technology To provide GNSS positions from the GeoExplorer 6000 series handheld to another device using a Bluetooth wireless connection you must l Zi Connect the other device to the GeoExplorer 6000 series handheld Configure the handheld to output data to the other device Make sure that the GNSS Connector software is installed on the handheld see GNSS Connector software page 67 Configure the other device to receive data from the handheld Step 1 Connecting the other device to the GeoExplorer series handheld l Turn on the GeoExplorer 6000 series handheld s Bluetooth ra
180. the Status section of the GNSS field software Connecting to an office computer using Bluetooth wireless technology Instead of using a USB or serial cable to physically connect to an office computer you can use Bluetooth wireless technology to connect to ActiveSync technology or the Windows Mobile Device Center WMDC on a Bluetooth enabled office computer Note Not all Bluetooth devices and Bluetooth management software support ActiveSync technology or WMDC connections Check with the manufacturer of the office computer for compatibility Note The exact steps required may vary depending on the office computer To connect to an office computer to use ActiveSync technology or WMDC with a Bluetooth connection you must 1 Set up the connection to the computer 2 Connect to ActiveSync technology or WMDC using Bluetooth wireless technology GeoExplorer 6000 Series User Guide 109 6 Getting Connected Step 1 Setting up the connection to the computer 1 From the Bluetooth user interface on the office computer make sure that the computer allows itself to be discovered by other Bluetooth devices 2 Configure ActiveSync technology or WMDC on the office computer to connect to the correct Bluetooth port The steps required depend on the operating system installed on the office computer If the office computer is using e the Windows 7 or Windows Vista operating system a From the Start menu on the office computer select Cont
181. the Trimble website www trimble com for more information GeoExplorer 6000 Series User Guide 17 1 Introduction About the GeoExplorer 6000 series handheld The GeoExplorer 6000 series includes the GeoXH and GeoxT handhelds These handhelds combine a Trimble GNSS receiver with a field computer powered by Microsoft Windows Mobile version 6 5 operating system The GeoExplorer 6000 series handheld has built in Bluetooth wireless technology for cable free connection to other devices and Wi Fi connectivity for connections to networks In addition some GeoExplorer 6000 series handheld editions are equipped with a wireless cellular modem for downloading and transmitting data over the Internet The GeoXT handheld uses EVEREST multipath rejection technology to provide submeter accuracy The GeoXH handheld uses both EVEREST and H Star technology to provide decimeter 10 cm accuracy either in real time or after postprocessing In addition both the GeoXH and GeoXT handhelds are compatible with Trimble Floodlight satellite shadow reduction technology for improved productivity in conditions where sky view is obstructed by buildings trees or landscape features For more information see Chapter 5 Using the GNSS Receiver Supported GNSS field software To collect GNSS data with the GeoExplorer 6000 series handheld you must install GNSS field software onto the handheld You can use the GeoExplorer 6000 series handheld
182. the stylus or you finger over the screen to scroll a page or a list up or down If at any time the touch screen does not respond correctly to stylus taps or your finger realign it For more information see Screen page 53 The stylus is located on the rear of the handheld To remove the stylus from its holder slide the stylus downwards To attach a tether to the stylus 1 Hold the stylus with the Trimble logo facing upwards and insert the end of the tether down through one of the two holes in the top of the stylus and then back up through the other hole 2 Insert the other end of the tether through the loop and pull until the knot in the tether is tight 3 Attach the tethered stylus to the handheld as described below To attach a tethered stylus to the handheld feed the end of the tether through the top of the stylus retainer on the rear of the handheld and then feed the end of the stylus through the loop until the knot in the tether is tight 46 GeoExplorer 6000 Series User Guide Entering information Using the Windows Mobile Operating System 3 Depending on the program you are using you can enter information in several ways as described below Input method Description Synchronizing Use Microsoft connection management software to exchange information between the handheld and an office computer For more information see Chapter 4 Connecting to an Office Computer Typing Use the Keyboard input panel to enter
183. thod to connect to the Windows Mobile Device Center GeoExplorer 6000 Series User Guide 127 8 Troubleshooting ActiveSync technology Problem Cause Solution ActiveSync technology The connection is not In the ActiveSync technology dialog on the office computer will not connect to the initiated automatically select File Connection Settings and then tap Connect handheld ActiveSync does not Disconnect the handheld from the office computer Restart recognize the GeoExplorer the office computer Reset the handheld see Resetting the 6000 series handheld handheld page 34 and then reconnect the handheld to the office computer An incompatible version of ActiveSync version 4 5 and later is compatible with the ActiveSync technology is GeoExplorer 6000 series handheld If version 4 5 or later of installed the ActiveSync software is not installed on the office computer you can install it from the GeoExplorer 6000 series Getting Started Disc You can also download the latest version from the Microsoft website at www microsoft com windowsmobile activesync default msp X The connection is not In the ActiveSync technology dialog on the office computer enabled in ActiveSync on the click File Connection Settings If you are using computer e a USB cable make sure that the Allow USB connections check box is selected from the drop down list e a Bluetooth connection make sure that the correct port for Bluetooth is selected
184. tooth radio and make the handheld visible to other devices see page 86 On the other device turn on the Bluetooth radio On the other device make sure that Bluetooth file transfer is enabled Use the Bluetooth management software on the other device to scan for devices and then set up a connection to the GeoExplorer 6000 series handheld Use the Bluetooth management software on the other device to locate the file and transfer it to the My Documents folder on the handheld Beaming files to or from another device You can beam files contacts tasks and appointments between the handheld and another device To receive beamed files from another device if Note All incoming files are automatically saved in the My Documents folder on the handheld To send beamed files to another device k Make sure that the GeoExplorer 6000 series handheld s integrated Bluetooth radio is turned on see page 86 r X 4 GH 10 12 Beam Mode C Receive all incoming beams Tap amp Settings Connections Beam Select the Receive all incoming beams check box and then tap OK When another device attempts to beam a file you are prompted to accept the file To receive the file tap Yes Make sure that the GeoExplorer 6000 series handheld s integrated Bluetooth radio is turned on see page 86 File Explorer r X GW 10 13 3 sshot008 png On the GeoExplorer 6000 series handheld open Lg yaad File Explor
185. turn procedures then in effect How to Obtain Warranty Service To obtain warranty service for the Product please contact your Trimble dealer Alternatively you may contact Trimble to request warranty service at 1 408 481 6940 24 hours a day or email your request to trimble_support trimble com Please be prepared to provide your name address and telephone numbers proof of purchase acopy of this Trimble warranty adescription of the nonconforming Product including the model number and an explanation of the problem The customer service representative may need additional information from you depending on the nature of the problem Warranty Exclusions and Disclaimer This Product limited warranty shall only apply in the event and to the extent that i the Product is properly and correctly installed configured interfaced maintained stored and operated in accordance with Trimble s applicable operator s manual and specifications and ii the Product is not modified or misused This Product limited warranty shall not apply to and Trimble shall not be responsible for defects or performance problems resulting from i the combination or utilization of the Product with hardware or software products information data 4 GeoExplorer 6000 Series User Guide systems interfaces or devices not made supplied or specified by Trimble ii the operation of the Product under any specification other than or in additi
186. typed text by tapping keys on the on screen keyboard Drawing Use the stylus like a pen to draw or write directly on the screen Recording Create a stand alone recording or embed a recording into a note Using the on screen keyboard The keyboard button automatically appears in the tile bar of any application To display the keyboard tap the keyboard button or tap a text box in the application To enter characters use your finger or the stylus to tap the keys on the keyboard When you finish entering text in a field tap Tab to accept the text you have entered and then move to the next field To enter special characters tap 123 to Tasks Q oP 4 4 23 UU 123 i2 l3 l4fsls 7ls olo J 4 Tab af wf e o tf y uf i od el E CAP a s a Shift zf xf evl bf nla tt a N Jia GR ORS Res Keyboard button Textbox Keyboard display keyboards containing numbers and symbols To switch back to the main keyboard tap 23 again To hide the keyboard tap the keyboard icon again X Tip To make the keys larger tap Settings Personal Input In the Input method list select Keyboard and then tap Large Keys GeoExplorer 6000 Series User Guide 47 3 Using the Windows Mobile Operating System Drawing and writing directly on screen In some applications for example Notes you can draw or write directly on the screen using the stylus l 2 3 4 Tap W and then tap the Notes
187. ure the NMEA application to filter out non DGNSS positions GeoExplorer 6000 Series User Guide 131 8 Troubleshooting Problem The GNSS Connector utility reports Unknown Error Code 5 appears Cause The GNSS Connector software may report Unknown on COM3 A receiver timeout error has occurred caused by issues with communications to the receiver or when the receiver has taken too Solution This should not interfere with operation of the handheld Close the dialog and if the handheld does not automatically connect to the receiver try to connect to the receiver again If repeated attempts to connect to the receiver fail contact your Trimble reseller long to reconnect The receiver will not connect and the GNSS LED is solid red connection error Real time DGNSS Issues Cause The SBAS satellite is obstructed from view Problem The handheld is not receiving SBAS real time corrections You are outside the WAAS EGNOS or MSAS coverage area The handheld is not able to track a new or a specific SBAS satellite You are not using the latest SBAS configuration ini file 132 GeoExplorer 6000 Series User Guide There is a GNSS receiver Reset the receiver then attempt to connect again If repeated attempts to connect to the receiver fail contact your Trimble reseller Solution Check the location of the SBAS satellite in the Skyplot section of the GNSS field softwa
188. used for NMEA messages Depending on the number of satellites being tracked for example if you are tracking GLONASS and GPS satellites the amount of data being captured at once may often cause the 4800 bit limit to be exceeded Buffers have been added which allow the data to be stored and then sent when it is able to This avoids data corruption but may delay delivery of data and positions may take as long as 8 seconds to be sent from the time at which they were originally recorded If you need 4800bps output Trimble suggests that you try to minimise the effect by reducing the amount of NMEA data being sent for example by dropping out NMEA sentences from the NMEA stream 4 Tap Done For more information refer to the GPS Controller Help 82 GeoExplorer 6000 Series User Guide Getting Connected In this chapter m Wireless connection information Connecting to a cellular network from the modem m Connecting to a Wi Fi access point m Connecting to a Bluetooth enabled device m Connecting to other devices using the USB to serial converter CHAPTER The GeoExplorer 6000 series handhelds include a number of options for connecting to other devices For wireless connections to networks or other devices the options are e a3 5G capable cellular modem available on 3 5G editions only e an 802 11 b g compatible Wi Fi radio e a Bluetooth radio You can also connect to other devices using the USB to serial converter
189. vity icon W on the pull down list select Wireless Manager and then tap the Wi Fi button Tip To delete a Wi Fi connection tap and hold the connection in the Wireless tab of the Wi Fi Settings screen and then select Remove Settings GeoExplorer 6000 Series User Guide 91 6 Getting Connected Connecting to a Bluetooth enabled device The GeoExplorer 6000 series handheld has an integrated Bluetooth radio that you can use to establish a wireless connection to other Bluetooth devices that are within range Using a Bluetooth connection you can communicate with devices such as cellular phones office computers other handhelds and Bluetooth enabled laser rangefinders and barcode scanners You can also communicate with peripheral devices that use Bluetooth adaptors instead of serial or USB connections The GeoExplorer 6000 series handheld can act as a Bluetooth client device or a Bluetooth host device and can act as both at the same time The concepts of client and host devices are explained in detail below Connecting to a Bluetooth device as a client You can use the GeoExplorer 6000 series handheld as a client device which uses services offered by Bluetooth host devices that are within range In general the host device provides information to the client device but in some cases the client initiates the connection and also provides information to the host device The services used by a GeoExplorer 6000 series handheld when connecting a
190. w device The Bluetooth e X 6 GH 12 17 handheld searches for other Bluetooth devices PAN Devices gt Mode and displays them in the list Tap Add new device to search for other Bluetooth devices Tap on a device to Ifthe device you are trying to connect is not iid ari displayed in the list ensure that the device is on Connected and within range and then tap Retry to search for devices again Add new device 4 Tap the name of the device you want to pair with and then tap Next 5 Inthe Passcode field enter a passcode of between 1 and 16 characters If you are connecting to adevice with a keypad enter a passcode of your choice adevice without a keypad but you know that the device has a pre programmed passcode that will be exchanged enter that passcode on the GeoExplorer 6000 series handheld Note Trimble recommends that you enter only numbers as some devices do not support passcodes that include letters 6 Tap Next 7 When prompted enter the same passcode on the other device 8 On the handheld tap the name of other device The Partnership Settings screen appears 9 Ifrequired change the name of the device in the Display Name field 10 Select the service s you want to use with this device For example if you are connecting to aBluetooth enabled phone to connect to the Internet and receive real time corrections or download background maps select Dialup Networking DUN 96 Ge
191. with the computer To reset the handheld to the factory default settings 1 Press and hold the two application keys on the handheld 2 While holding the application keys press and hold the Power key until the device reboots 3 Keep holding the two application keys until the factory reset screen appears 4 Follow the on screen instructions to continue the factory reset GeoExplorer 6000 Series User Guide 35 2 Getting Started Storing data A The handheld has two types of memory Memory a YV 4 GH 3 04 e Storage memory is similar to the hard disk ina Storage C Main Storage C computer and is used for storing programs and Storage Program d t Total 1024 00 Total 221 59 MB ala In use 13 13 MB Inuse 67 96 MB Free 1010 87 Free 153 63 MB e Program memory is similar to the RAM in a computer and is used for running programs You cannot use it to save data To check the storage capacity on the handheld tap Settings System Memory The Storage and Program columns show the current memory available Ppa larger iesaehig Stoeagemienaen and the memory that is already in use Pre installed documents and program files are not affected by power loss or resetting However you can still lose data if you accidentally delete or overwrite it CAUTION The Windows Mobile version 6 5 operating system does not include a Recycle Bin When you delete files from the handheld they are deleted permanently T
192. with the following GNSS field software e Trimble TerraSync software for configuring real time differential correction options and for productive GIS data collection and maintenance e The Trimble GPScorrect extension for Esri ArcPad software for configuring real time differential correction options and for productive GIS data collection and maintenance e Trimble GPS Controller software for configuring real time differential correction options and NMEA output settings e Other GNSS field software that accepts NMEA messages To use NMEA Output messages you must purchase and activate the NMEA output option See Activating GNSS receiver option upgrades page 78 For more information see Chapter 5 Using the GNSS Receiver 18 GeoExplorer 6000 Series User Guide What s in the box When you unpack the GeoExplorer 6000 series handheld check that you have received all the components GeoExplorer 6000 series handheld Carry pouch AC adaptor kit Introduction 1 e USB data cable e Hand strap kit e Spare stylus and lanyard Microsoft Getting Started CD and licence A sheet of device ID labels Anti reflection screen protector kit e Rechargeable battery pack Inspect all contents for visible damage scratches dents and if any components appear damaged notify the shipping carrier Keep the shipping and packaging material for the carriers inspection Accessories The following optional accessories are available

Product Manual - Field Environmental Instruments, Inc.

Contents

Download Pdf Manuals

Related Search

Related Contents