Instruction Manual
Contents
1. The lightning flash and arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product F Ce alle CAUTION WARNING The AUSTRALIAN Company CEO To reduce the risk of electric shock do not remove cover or back No RISK OF ELEC ager foe ee user serviceable parts inside Refer servicing to qualified service personnel USER MANUAL CAUTION The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product J Bluetooth WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN READILY OPERABLE TO COMPLETELY DISCONNECT THE POWER INPUT THE MAINS PLUG OF THE APPARATUS MUST BE DISCONNECTED FROM THE MAINS COMPLETELY THE MAINS PLUG SHOULD NOT BE OBSTRUCTED OR SHOULD BE EASILY ACCESSED DURING INTENDED USE PLEASE NOTE YOU WILL FIND THE CAUTION RATING LABEL FOR THIS PRODUCT DO NOT EXPOSE TO DRIPPING LOCATED ON THE REAR OF THE UNIT OR SPLASHING LIQUIDS CAUTION GROUNDING OR POLARIZATION THE PRECAUTIONS SHOULD BE TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT IN RECEPTACLE WALL SOCKET NOTE CAUTION SYMBOLS ARE PRINTED ON BOTTOM OF UNIT PLEASE REFER TO INSTRUCTION MANUAL THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS2. z y See Radio Memory section for further details This unit runs via internal rechargeable Lithium ion battery It can be also recharged with the provided AC Charger Please ensure your country s AC Charger is within the AC Adaptor s voltage range Insert the small DC plug of the AC Charger into the DC Socket at the back of the unit Plug the AC Charger into a wall outlet with AC power The unit is charging if the charging LED indicator is on Once the unit is fully charged the charging LED indicator will automatically switch off Once the unit has been charged it can simply be unplugged and taken anywhere to be used Total play time when fully charged can go upto 5 6 hours depending on the type of music played and the loudness level When the unit is not being used we suggest to keep it plugged in and charging IMPORTANT PLEASE FULLY CHARGE THE UNIT BEFORE FIRST USE FOR BEST RESULT FULLY CHARGE THE UNIT BEFORE USE EACH TIME IF THE BATTERY IS FULLY DRAINED PLEASE ALLOW IT TO RECHARGE FOR A FEW HOURS BEFORE USE E 3 E 4 Radio Memory After tuning into a desired station it can be stored into one of the 20 available memory positions Short Press PROG key to go to memory tuning mode Press amp release MEM or MEM key to choose the desired memory storage position you would like to store into CHO1 to CH20 Short Press PROG key again to confirm selection To erase a save
3. FILLED WITH LIQUIDS SHOULD BE PLACED ON THE APPARATUS UNDER THE ENVIRONMENT WITH ELECTROSTATIC DISCHARGE THE BLUETOOTH FUNCTION MAY STOP TEMPORARY AND THE USER NEEDS TO MANUALLY PRESS THE PLAY KEY AGAIN TO GO ON LISTENING THE MUSIC BATTERY SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE FIRE OR THE LIKE CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE PBT600 High Power Rechargeable Wireless Boombox E 2 LOCATION OF CONTROLS POWER SOURCES Main Speaker Left Right Slot for placing your Smartphone Tablet Handle Function keys panel Display key Mode key Stop Prog key MEM Folder key MEM Folder key 0 Power key On Standby 1 LCD display 2 Next Tune key 3 Back Tune key 4 Play Pair key 15 Function Key 6 7 8 9 OOAONDARWDHN USB MP3 Socket SD Card Socket Microphone Input Socket Microphone Volume Knob 20 Bass Knob 21 Treble Knob 22 Volume Control Knob 23 Telescopic antenna 24 Aux input 1 socket 25 USB Charging Socket 26 Aux Input 2 socket 27 DC Power Socket 28 Charge Indicator LED 29 Reset hole OPERATION USB charging port This unit is equipped with a DC 5V USB charging port on the back panel To utilize this function simply connect the device you would like to charge eg Smartphone or T
4. PECIFICATIONS USB THUMB DRIVE amp SD CARD FLASH MEMORY MP3 PLAYBACK The following chart shows how to use USB SD mode KEY For USB thumb drive amp SD Card FUNC Press repeatedly until USB or CARD is displayed DISPLAY Playback time Folder Track FOLDER FOLDER Choose folder location on your USB SD Card Not usable in RANDOM play mode NEXT Skip to next song Not usable in REPEAT 1 mode BACK Skip to pervious song Not usable in REPEAT 1 mode PLAY PAUSE Start or pause Playback MODE NORMAL PLAY REPEAT REPEAT ALLREPEAT FOLDERRANDOM PLAY NOTE RANDOM PLAY is limited to songs within a selected folder only STOP Stop playback NOTE It takes time to Open amp Verify a large USB Drive SD Card and count all the song files If there are many files it can take up to 60 seconds for this process IMPORTANT REMOVAL OF USB DRIVES amp SD CARDS Never remove SD cards or USB drives from the unit during playback Always STOP playback then press FUNCTION key to switch to another mode RADIO BT before removing your USB SD memory to prevent damage to your song files and memory devices itself Using Audio Line in Connection Aux input This unit comes with 2 Aux input sockets AUX IN 1 AUX IN 2 allowing you to connect two external devices at the same time You can switch between the 2 Aux Input sources to mix your music Connect your external device to t
5. ablet to a USB cord and plug it into the USB charging port The device will be charged automatically when it is successfully connected even during playback The USB port should only be used when the AC Charger is plugged into the unit FUNCTION KEY Pressing the FUNCTION Key repeatedly will allow you to select one of the different source functions as follows BT gt FM gt US CARD gt AUX gt AUX 3 Bluetooth Radio MP3 SD Memory Card Input Input player MP3 player Jack Jack Radio Press FUNC key repeatedly until display shows FM To improve radio reception extend and adjust position of the telescopic antenna After tuning into a desired station use MODE key to select MONO STEREO mode In some cases when the reception is poor we recommend to use MONO mode for better clarity Manual Frequency Adjustment Scan Mode Press amp immediately release TUNE or TUNE Key to manually adjust the radio frequency 1 step at a time When the desired station is reached it can be saved into one of the MEMORY positions See Radio Memory section for further details Automatic Frequency Adjustment Seek Mode Press amp Hold For 2 seconds TUNE or TUNE key to seek the next available radio station frequency When the desired station is reached it can be saved into one of the MEMORY positions Rechargeable Battery
6. d radio station simply replace it with a new station in same memory position Recalling a saved memory station Short press MEM MEM key to find recall a desired memory position CH01 to CH20 OPERATION Bluetooth wireless playback A2DP Wireless Audio Streaming This unit can wirelessly playback audio from any device with Bluetooth A2DP function within approx 30 feet 10m Simply pair your device to this unit to enjoy Wireless Audio Streaming How to pair your device to this unit Switch on the unit and press FUNC key repeatedly until display shows BT The BT symbol in the LCD display indicates the pairing status Searching Flashing slowly Pairing Flashing rapidly Connected BT symbol stays on To force the unit to go into SEARCHING mode press and hold the PAIR key for 2 seconds until the BT symbol begins flashing slowly Switch on Bluetooth function of the device you would like to pair with Your Smartphone Tablet Laptop Go to your device s Bluetooth Setting DEVICE NAME BT GHETTO BOX Add or search for devices Make connection on your device eg Press CONNECT If asked for a pass code enter 0000 This is a one time event per device To pair your unit with another device please repeat the above steps The unit remembers up to 5 devices There is no need to repeat this pairing procedure for up to 5 devices even if unit is powered
7. ders E 6 Palsonic The AUSTRALIAN Company Palsonic Customer Service Telephone Australia 1300 657 888 Palsonic Corporation Pty Ltd ABN 34 000 474 108 1 Joynton Avenue Waterloo NSW 2017 Australia Telephone 02 9313 7111 Facsimile 02 9697 0655 www palsonic com au
8. his unit using a standard stereo headphone 3 5mm to 3 5mm cable Press FUNCTION key repeatedly until display shows AUX 1 AUX 2 depending on which socket you have plugged into Switch on your external device amp activate playback on it Playback of external device will start momentarily Adjust the volume control of the main unit and your external device to the desired level Playback control can be done only through your external device Remember to switch off the unit when you finish using the external device System Reset When electrostatic discharge ESD occurs at the front surface whether metal or plastic or near any part or any button of this unit there may be a possibility that the product may stop operation and or shut down immediately This is a normal condition and intended to protect the unit and internal components against damage In such a case please reset the unit using the system reset hole at the rear of unit simply insert a paper clip into the reset hole for 2 seconds to revert the unit to normal operation Specifications Power Supply Rechargeable Lithium 3 7V 2Ah X 2 PCS Built in AC Charger Input AC 100 240V 50 60 Hz AC Charger Output DC Input of unit DC 9V 1 5A Recharge Power USB 5V minimum 500mA Speaker 4 x2 Frequency FM 87 5 108 MHz MP3 acciai 16 320 kbps max 999 Files 99 Fol
9. off The unit will also automatically pair with the LAST paired device if it is found when the unit is powered on and switched to Bluetooth mode Note that only one device can be paired at any given time but the unit will remember up to 5 devices in memory Disabling Bluetooth Connection To unpair a Bluetooth device that has already been paired press amp hold PAIR key for a few seconds until pairing status changes from CONNECTED to SEARCHING The BT symbol starts flashing slowly Sound Control Adjusting loudness can be done by rotating the Volume Knob on this unit or the device you have already paired with Note if there is no playback ensure the volume on both devices is not set to 0 Sound Effect Music Equalization To enhance the quality of music this powerful sound system comes with two additional equalization functions At anytime during playback you can rotate the bass and treble knobs for stronger Low frequencies BASS or High frequencies TREBLE Microphone input This unit comes with a microphone input function To utilize this function simply connect your microphone to the 6 3mm 1 4 input socket at the front of this unit You can adjust the Mic volume by rotating the microphone volume knob This function works perfectly during playback of all input sources including Bluetooth FM radio amp Aux Input so you can sing along with any source or device E 5 OPERATION S
Download Pdf Manuals
Related Search