USER MANUAL - Peter Lynn
Contents
1. center of the relaunch handle CROSSOVER LINES ATTACHMENT KNOT In case the knot connecting the crossover lines with the center v line has come undone re attach it as shown Q PETER LYNN CROSSOVER BAR WITH PUSH AWAY SAFETY RELEASE SWIVEL SAFETY LEASH ATTACHMENT TOP REAR LINE ADJUSTMENTS _ gt lt lt ae _ a SS LM T ae A eS E e aa a F x Er y JA wpet The top section of the Centrix harness loop is fitted with a swivel to unspin your top flying lines To prevent any wear and tear as well as any malfunctioning of the safety system regularly unspin your top flying lines by using the swivel When using an additional safety leash for example when flying your kite unhooked the safety leash can be at tached to the small loop in the center of the relaunch handle To set the difference between the top and rear lines the Crossover bar has two settings on the rear line attach ments 1 Faster flying kite e Better upwind e Less power e Less stalling in light winds or when the kite is wet 2 More direct steering e More power ynn com 7 a A i A he a ic2. release cuff back in place In case you completely want to disconnect yourself from the kite you can activate the secondary quick release afterwards Activating the secondary quick release y To activate your secondary quick release push the red release cuff on the har ness loop towards the kite QU PETER LYNN Re connecting the secondary quick release Re connect the secondary safety release by placing stainless steel ring on the end of the depower loop tube into the Centrix push away center piece until it locks in behind the hook inside the center piece Now slide the release cuff towards the spreader bar Always make sure all parts are free of sand and snow before re connecting your safety system www peterlynn com USER MANUAL HARNESS LOOP LOCI IN PIN JA 7 RELAUNCH HANDLE After hooking in your harness loop you can use the security pin to prevent your harness loop from accidentally unhooking from your spreader bar Place the lock in pin through the spreader bar hook just below the har ness loop tube To relaunch your kite with the leading edge down pull on the relaunch handle The kite will fly up backwards and will slowly turn around Once the kite has completely turned around let go of the relaunch handle and continue flying your kite SECURING YOUR KITE WITH A GROUNDSTAKE When using a groundstake to secure your kite the groundstake can be placed though the small loop in the
3. USER MANUAL J E a Crossover bar terminology 1 Left top flying line attachment Right top flying line attachment Right rear flying line attachment Crossover lines Center V line Crossover pulleys Center pulley Relaunch handle with safety leash WOON AWM KR WN Left rear flying line attachment attachment Primary safety release Stopper ball Left leader line Right leader line Endcap with integrated bungee chord Bar with EVA foam grip Swivel Centrix harness loop with push away safety release Harness loop tube Harness loop lock in pin When things get out of hand you might want to use your safety release The Crossover bar has a primary release above the bar After activating the release the kite is only supported by the rear flying lines Activating the primary quick release To activate your primary quick release push the red release cuff towards you CROSSOVER BAR WITH PUSH AWAY SAFETY RELEASE Attach your flying lines to the kite and Crossover bar as follows Attach the flying lines to the bar using laskhead knots FLYING ii FLYING LINE FLYING LINE LINE ATTACHMENT LINE ATTACHMENT LINE ATTACHMENT ON BAR ON BAR ON BAR Re connecting the primary safety release Re connect the primary safety release by placing the loop on the end of the line connected to the center pulley over the stainless steel pin folding the pin down an sliding the
Download Pdf Manuals
Related Search