DIAMOND Instruction Manual
Contents
1. 4 Diamond Dermabrasion should not be used on sensitive areas such as eyelids The eyelids should be closed at all times during the procedure and may be covered with damp cotton pads 5 The following areas are considered inappropriate for treatment Skin tumor moles birthmark angioma lips eyes herpes skin cancer and liver spots 6 Do not modify or attempt to repair the machine contact the technician for maintenance NO of WD 10 1 Clean skin with clear water 2 Never stop the electrode on the skin in one spot 3 Always keeps the electrode moving across the skin 4 Never point the electrode towards chest area 5 Do not immerse the handle or the machine into water Doing so could cause serious injury or death 6 Store in a dry cool place Safety Warning Important Notice of Caution before using this machine Never operate this equipment on a person has or suffers from the following medical conditions described below The salon or operator may consider having a client sign a waiver to the effect that he she is free of any poor health conditions Heart Disease Heart Murmur or Irregular Heart Rate Has a Pacemaker or other type of heart rate balancer Pregnancy Epilepsy Alcoholism Ulcers Disease of Stomach Intestine Liver or Pancreas 9 Breast Cancer 10 Undergoing treatment for any form of Cancer 11 Had major surgery within the past year 12 Asthma 13 Cold Flu or Upset Stomach 142. DIAMOND Instruction Manual For 7 Functions Diamond Dermabrasion Unit Please read through the entire instruction manual Before using this machine Instruction of 7 Functional Diamond Dermabrasion Unit Preface The Micro crystal Dermabrasion was designed by Italian Florence s Mattioli at first until now had over 20 years history This kind of technology only supplies to the dermatology expert and doctor at first uses but more and more SPA House amp Beauty Saloon also gradually uses it was called the best method of medical beauty This method successfully has developed in Europe for several years cures patient thousands of examples and has obtained the extremely satisfactory effect Now we want to introduce the Diamond Dermabrasion it is a creative improvement of the Micro crystal Dermabrasion The Diamond Dermabrasion provided a non surgical skin refinish Safety Warning 1 Never operate this equipment on a person has or suffers from the following medical conditions Heart diseases Sensitive Skin Damaged Inflamed or Infected skin 2 When proceed deep cleaning or Galvanic accompanies with suitable emulsion or gel 3 Never stop the handle s blade on the skin in one spot always keep the blade moving on the skin 4 Never point the blade towards the eyes or throat 5 Do not modify the equipment 6 Do not immerse the handle or the machine into water 7 After usage clean the Handle and store in a cool and
3. Preparation 1 Set the machine to No time limited or Time limited mode The machine is set to No time limited mode at default the Time window displays To set Time limited mode use Time adjuster to set desired time When the time is up the Time window displays 00 To operate the machine again use Time Adjuster to adjust 2 The Scrub Head output classify into 8 degree Level 1 4 degree working under regular function Level 5 6 can eliminate acarid worms Level 7 8 can clear out lead poison At level 5 and above the machine adds Galvanic automatically on the Scrub head To control the intensity of the Scrub head press UP or DOWN button as desired 12 Trouble Shooting If the machine does not function properly please follow these procedures before requesting maintenance 1 Low suction power low vacuum pressure Please check again the vacuum hose should be connected well to the socket and then hand pieces And then turn the Vacuum Regulator to the maximum and then start the Diamond Dermabrasion and then use finger to block the hole of the hand pieces Normally the vacuum Gauge can reach the 24 inch Hg Please check the O ring in the Diamond pens 4 O ring in the socket If you cannot settle the problem finally please contact your distributor Don t open the machine by yourself without the technician guidance 2 No response when turn on the power Please exchange the fuse And connect the pow
4. dry place The machine should be grounding Specifications Voltage 240V 50 60Hz 220V 50 60Hz 115V 60Hz Power 100 230 VA Fuse 3A 14 Cleaning Skin 1 Just hold the scrubber flank two piece metal and then it can start work 2 Use Cleaning Massage button to select Cleaning Function the Scrubber indicator will light on The machine is at cleaning function Apply cleansing lotion on the skin for 20 seconds gently rub the skin with the front of the scrub head at 35 to 40 degree angle Skin Care After Cleaning Skin Press the Cleaning Massage button again the Patter indicator lights on and the machine is at Massage function Apply essential gel on the skin and massage parallel with the back of the scrub head Treatment Reference Table i Operate Output er Mode Intensity Aue Lifting and j Melanin Cure Cleaning Level 1 4 2 3 Mins AR Massaging Level 1 4 2 3 Mins Remove Acarid Cleaning Level 5 6 2 3 Mins Worms rt Cleaning Level 7 8 2 3 Mins Caution Do not over adjust the intensity should be adjust from low to high till reach comfort zone procedure by using sterile diamond heads to abrade or rub off the top skin layer tnen Vacuuming out the particles along with any dirt and dead skin back up This procedure removes skin debris imperfections blemishes wrinkles and unwanted pigmentation on the skin Moderate usage of Diamond Dermabrasion accom
5. reduced wrinkle and invisible appeared fine line also lift the skin result for younger and healthy look Ultrasonic generate frictional heat which accelerate blood circulation muscle relaxation and decompose the cellulite to break down exceed fat BL 668A Ultrasound with 3 probes provided non surgical lifting This machine utilizes sonic vibrations to reduce lines leaving the skin firm and smooth 5 Photon Treatment Red The 650nm red light is for wakening and activating the skin Blue The 462nm blue light is for calming and diminishing inflammation Green The 527nm green light is for comforting the skin Purple The 600nm purple light is for toxin elimination Orange The 610nm light is for Balancing and recomposing Turquoise The 470nm turquoise light is for relaxation Yellow The 590nm yellow light is for tightening and oxygen supply Super Skin Scrubber Introduction Super Skin Scrubber is a superior beauty instrument of the same kinds Each Person after treatment a period of time can proved to be having significant effects on skin especially for facial treatment It employs a variety of currents to produce vibrations with a frequency of 28000 times per second lt provides the ability to penetrate skins and activate pores underneath Moderate usage of ultrasound accompany with suitable emulsion or gel can eliminate pigmentation wrinkle acne dead skin and dirt making the skin shining and elastic Operating Instructions
6. Any serious illness or disease not listed above 9 ONOAOR WD Please follow direction of arrows 9 After treatment brush off all remaining dead skin with a soft brush and rinse with damp sponges or damp cool towel 10 Allow skin to dry then apply desired skin product 11 To clean the Diamond Head use toothbrush or cotton swab damped with a little alcohol to wipe off the dirty impurity and then use UV light or high temperature for sterilization Operating Instruction for hot amp cool treatment 1 Connect the hot amp cold plug to the machine please note the socket is in the Hot amp Cold Area 2 Start the machine To turn on the machine press the on button And then start the hot amp cold treatment function 3 Please wait 3 minutes and then you can apply the treatment For the machine need time to warming up or cool down the treatment probe 4 Normally one treatment program is about 5 30 minutes Please note that do not stay in one treatment place over time when applying the treatment to avoid any hurt caused by cool head 5 After treatment please turn off the machine and then pull out the plug make clean the probe Please clean the treatment probe before treatment and after treatment Operating Instruction for Ultrasonic function l Preparation 1 Before start the ultrasonic cleanse the area to be worked After cleansed apply suitable lotion and gel to the skin 7 2 Press P
7. ce 12 22 8 12 Forehead 12 22 10 12 Chest 15 20 15 18 Nose 10 15 10 14 Neck 18 18 10 15 Near Eye Area 8 12 8 10 Treatment Schedule Table Treatment Frequency days Total Visits Face Peeling 6 10 3 5 Fine Lines 7 13 6 8 Neck 12 14 3 5 Acne Scars 7 12 8 10 Hyperpigmentation 7 12 8 10 6 Use the incline area of Hand piece to contact with the skin surface Proceed with a slow sliding motion Do not place the hand piece at one spot for too long doing so will cause harm to the skin 7 Adjust the crystal flow rate by the Vacuum Regulator slowly from minimum to maximum For commonly use do not set the flow rate to maximum unless it is of necessity This is for better comfort intensity DIAGRAM OF SUGGESTED MOVEMENTS AND AREAS FOR DERMABRASION Do not use on these areas Sensitive Skin Skin Rash Damaged Inflamed or Infected Skin Surgical scar less than 12 months old Skin Swollen The probes can not point to Eye ball Genitals 1 Always begin treatment conservatively and observe the effects by the touch and appearance of the skin A vacuum power that is too high or too big may cause an inflammatory response 2 Edema and erythema can occur following treatment but will resolve in few hours 3 Overly aggressive techniques can cause mild flaking over the next 3 4 days Epidermis that is treated too aggressively can lead to bleeding in the superficial dermis
8. er cord correctly If cannot settle the problem please contact to your distributor 3 Supersonic hand piece cannot work properly Please connect again the plug If cannot settle the problem please contact to your distributor 4 Hot amp Cold treatment cannot use Please connect again the plug If cannot settle the problem please contact to your distributor 11 6 BIO Face Lift Microcurrent is a low level of electricity that mirrors the body s own natural electrical impulses A microcurrent face lift is a non surgical non invasive cosmetic technique that safely and effectively improves the health and appearance of the skin perating Instruction for Diamond Dermabrasion 1 Push in the movable ring of copper nozzle at the hand piece and pull out the 6x4 size vacuum hose Then push in the black plastic ring on the vacuum hose 2 Put a drop of cream or milk lotion on the vacuum hose nozzle push in the movable ring and insert in the vacuum hose to the limit 3 Insert a cotton swab into the Diamond Head then tight up the Diamond Head on the hand piece Remove the cotton swab after every treatment 4 Turn on the power switch 5 Adjust the Vacuum intensity by Vacuum Regulator according to the following reference table the intensity displays on Vacuum gauge and check with the client for comfort Recommended Vacuum intensity on treatment area Treatment Area Normal Skin inHg Sensitive Skin inHg Fa
9. ower On Off for Ultrasonic to start the function 3 Output intensity display on Intensity window Press Intensity up and down button to set output intensity output intensity classify into 9 levels from minimum 0 to maximum 0 8 Watts cm Each level is 0 1 Watts cm For Facial work low to mid intensity is recommended For Body work mid to maximum intensity is recommended ll Face Treatment 1 Connect Face Electrode big one into Face Electrode output 2 Press Intensity up and down button to set output intensity to your need 3 Press Pulse Continuing mode to select Pulse or Continuing wave Pulse Continuing wave indicator will light on 4 Apply the Electrode working on the face lil Eye Treatment 1 Connect Eye Electrode small one into Electrode output Should take out the Face Electrode first 2 Press Intensity up and down button to set output intensity to your need 3 Press Pulse Continuing mode to select Pulse or Continuing wave Pulse Continuing wave indicator will light on 4 Apply the Electrode working around the Eye area Important 1 Clean skin with clear water 2 Never stop the electrode on the skin in one spot 3 Always keeps the electrode moving across the skin 4 Never point the electrode towards chest area 5 Do not immerse the handle or the machine into water Doing so 8
10. pany with skin products that penetrate through top skin layer that reach the dermis level helps to replenish natural nutrients restore cell activity and promote skin health The results after Micro Dermabrasion treatment is usually a healthy glowing beautiful skin Functions Introduction 1 The Diamond Dermabrasion see the preface 2 High Frequency The high frequency electrotherapy is an important beauty instrument lt is through the glass electrode Tube to product high frequency current and apply to the face thus achieves the treatment result It helps to calm the nerve and has analgesia function It produces the ozone for sterilization can help wound to heal and to restrain pores Improve secretion the pH value causes the skin lean to neutrality Accelerate blood circulation improve metabolism Has the function of anti aging anti wrinkle and tightening alth and appearance of the skin 3 The hot amp cold treatment function The cold treatment function is specially designed for claming down the skin after peeling The skin is sensitive after peeling treatment so the cold treatment procures is necessary The hot treatment function is designed for accelerating the absorption of nutrition 4 Ultrasonic function Ultrasonic utilizes sonic vibrations it works one million times per second 1 MHz The ultrasonic wave could stimulate skin tissue and improve permeability of the membrane to promoted collagen tissue
Download Pdf Manuals
Related Search