User Manual
Contents
1. MICEROFH N www microhdj com Model MINI ASTEROID User Manual Thanks for your purchasing please read this manual carefully before operating the system It gives you general information for your safety and better operation Inspection Check for the contents in the package refers to the following list 1 Laser light 1 2 Remote controller 1 3 Power cable 1 3 User manual 1 Installation Firstly be sure that the using voltage is match with the voltage marked on the base of the laser lighting NO Installation should be made by professional technician Fix the laser and adjust the angle of the laser lighting to your need UI Be sure that there is no flammable or explosive subject nearby The least distance is 0 5 meters At the same time keep more than 15cm between the wall and laser lighting 4 Please check whether the fan and the exhaust are blocked 5 There is a hole for connection W hen hang the laser lighting be sure the cable can undertake 10 times of the lighting weight o gt The laser lighting should be fixed J It is essential to be earthed well for the sake of safety Technical parameters Laser diode DPSS Red 650nm Green 532nm Blue 470nm Power supply AC110V 240V 50 60Hz Laser power Red 80mW Green 40mW Blue 80mW Motor N1 8 high precision step motor Control mode Sound control AUTO Remote Control Dimensions 27 x19 x13cm Netweigh2. Please power off the lighting for 15 minutes after running two hours ensure that the laser system is in well cooling state Please clean the lighting surface and lens regularly It is recommended that should be cleaned every 30 days Do not do it using the wet cloth or other chemical Do not looking at the laser source using telescope Do not touch the laser lighting by wet hand and forcefully pull the power line The distance between lighting and casting medium should be more than 1 meters W hen to be transported use the original package
3. t 1 0KG Gross weight 1 50K G CO SY MD u A W N FF Remote Control Setting W hen using the remote controller take the plastic card out of it Laser ON OFF AUTO Setin Auto M ode MIC Setin Sound M ode RG Rend and green laser on R Red laser on G Green laser on 1 Blue laser on 2 RB red blue laser on 3 GB green blue laser on 4 RGB laser on Colors built in Program W hen you lose the remote controller you can press the button of MODE in the front panel to choose the working mode and colors Press the button you can change the colors for lasers Press the button for three seconds you can change the working model Sound M ode A uto M ode Warning e Power off before installation or maintenance e The danger class of this laser lighting is CLASS III A Its dangerous for observing laser e Keep at least 0 5 meters distance between the lighting and flammable material Notices N on professional do not dismantle or repair the laser lighting W hen there is a problem please inquire with the professional or contact with the local dealer Do not exposure in the wet or dirty condition Prevent the laser lighting from strong vibration or punch Prevent other subject enter into the lighting Ensure the fan is not blocked Before power on be sure electric outlet is connected well with the socket Do not turn on and turn off frequently avoid to turn on the power for along time
Download Pdf Manuals
Related Search