Home

Panasonic GT Series Programmable Display User Manual

1. Item name Contents Product No For GT01 AIGT081 For GT02 GT02L AIG02810 For GT05 AIG05810 Waterproof For GT11 Forrai 10 in set AIGT181 packing For GT12 p AIG2810 For GT21 AIGT28121 For GT32 AIG32810 For GT32 E AIG32810E GT01 GT11 repair 5 sets AIGT083 4 pc set Attachment fittings For GT05 GT21 repair 2 pc set 5 sets AIGT28321 For GT32 GT32 E repair 2 pc set 5 sets AIG32830 Attachment fittings i with oe G repair 5sets AIG12830 dedicated P screws COM port connector Connector for repair 5inset AIGTO84 8 pin Note Although it is for GT02 it can be also used for GTO2L It is different from the packing attached to the GT02 unit Options Item name Contents pa GT01 For GT01 AIGT080 For GT01R AIGTO80R F l For GT02 GT02L AIG02800 Salta For GT05 Sold separately 40 in set AlG05800 p For GT11 AIGT280 sheet For GT12 AIG12800 For GT21 AIGT28021 For GT32 Sold separately AIGT32800 Backup battery Backup for battery GT02M2 GT02G2 GT05 GT 12 GT32 1pc AEPXBADI GT32 E Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Commercial product Item name Contents Model No Backup i battery Backup battery for GT11 GT21 1 pc CR2032 iter Printe GT
2. Function GT32M GT32T1 GTWIN GT32T0O Parts Switch 1 00 or later 1 00 or later 2 80 or later library Lamp 1 00 or later 1 00 or later 2 80 or later Message 1 00 or later 1 00 or later 2 80 or later Data 1 00 or later 1 00 or later 2 80 or later Bar graph 1 00 or later 1 00 or later 2 80 or later Clock 1 00 or later 1 00 or later 2 80 or later Line graph 1 00 or later 1 00 or later 2 80 or later Al History 1 00 or later 1 00 or later 2 80 or later List 1 00 or later 1 00 or later 2 80 or later Keyboard 1 00 or later 1 00 or later 2 80 or later Custom 1 00 or later 1 00 or later 2 80 or later Other Recipe Recipe 1 00 or later 1 00 or later 2 80 or later functions SD recipe 1 60 or later 1 60 or later 2 A0 or later Flow display 1 00 or later 1 00 or later 2 80 or later Write device 1 00 or later 1 00 or later 2 80 or later Sound Not available 1 00 or later 2 80 or later Password 1 00 or later 1 00 or later 2 80 or later Password 7 Operation security 1 20 or later 1 20 or later 2 94 or later Multi language exchange 1 00 or later 1 00 or later 2 80 or later Logging function 1 50 or later 1 50 or later 2 98 or later FP monitor function 2 00 or later 2 00 or later 2 C0 or later Display panel sideways setting 2 10 or later 2 10 or later 2 C1 or later Copy Cable between GTs Not available Not available Not available SD memory card 1 00 or later 1 00 or later 2 80 or later GT link 1 20 or later 1 20 or later 2 94 or lat
3. Function GT05 GTWIN Parts Switch 1 00 or later 2 90 or later library Lamp 1 00 or later 2 90 or later Message 1 00 or later 2 90 or later Data 1 00 or later 2 90 or later Bar graph 1 00 or later 2 90 or later Clock 1 00 or later 2 90 or later Line graph 1 00 or later 2 90 or later Alam History 1 00 or later 2 90 or later List 1 00 or later 2 90 or later Keyboard 1 00 or later 2 90 or later Custom 1 00 or later 2 90 or later Other Recipe Recipe 1 00 or later 2 90 or later functions SD recipe 1 60 or later 2 A0 or later Flow display 1 00 or later 2 90 or later Write device 1 00 or later 2 90 or later Sound Not available Not available Password 1 00 or later 2 90 or later Password F 7 Operation security 1 10 or later 2 94 or later Multi language exchange 1 00 or later 2 90 or later Logging function 1 40 or later 2 98 or later FP monitor function 1 90 or later 2 C0 or later Display panel sideways setting 2 00 or later 2 C1 or later Copy Cable between GTs Not available Not available SD memory card 1 00 or later 2 90 or later GT link 1 10 or later 2 94 or later PLC Multiple Connection 1 30 or later 2 97 or later xiii Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Version of GT11 and available functions Function GT11 GTWIN Parts Switch 1 00 or later 2 60 or la
4. Problem Cause Solution Screen 1 No screen number has been written to 1 Specify correct screen number doesn t the screen setting area the first word switch in the basic communication area word device from the PLC 2 The screen number to which you are 2 Refer to Reference Manual attempting to switch has already been written from the PLC to the screen setting area the first word in the basic communication area word device Screen is 1 The power voltage may be low 1 Check the capacity of the power supply unit if it is dim enough for the GT s power consumption 2 The contrast is set too low 2 Bring up the system menu and adjust the contrast 3 The backlight brightness is set too 3 Bring up the system menu and adjust the dark brightness 4 The backlight is off due to the 4 Touching any area of the screen lights that area If a Backlight Auto off setting in the switch part is set on the touched area the area will Setup of the GT configuration not light even if touched To change the setting settings in GTWIN change the content of the backlight auto off settings Backlight 1 The backlight auto off timer setting is 1 Change the backlight auto off timer setting goes off too too short quickly Date time 1 The PLC s internal calendar timer 1 Adjust by rewriting the value in the PLC s internal display is used as a reference is incorrect calendar timer incorrect Touch panel 1 Valid condition
5. Connecting to the 2 channel type RS232C FPG COM2 AFPG802 RS232C S1 R1 S2 R2 SG CEECEE do As for the connection to S2 and R2 for COM2 make the same connection as S1 and S2 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Connecting to the 1 channel type RS485 and 1 channel type RS232C The connections with either one unit or two units are available AFPG806 To power GT side 24V DC RS232C supply Pin name Signal 24V FG FG RD R RS CS G D D c Cc G PLC side FPG COM4 AFPG806 RS485 RS232C Goo S N N S S Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 2 5 RS232C Connection with FP0 FPOR COM Port Connecting to the COM port To power supply GT series Usable models PLC PLC communication cable Programmable display FPO FPOR RS232C type 5 V DC 24 V DC RS232C type Connecting to the COM port of FP0 FPOR PLC side FPO FPOR To power supply GT side 24V DC RS232C Pin name Signal Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 2 6 RS232C Connection with FP e COM Port Connecting to the COM port T
6. Mounting panel Cable Unit mm Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 5 GT11 40 5 Display unit 100 Display unit Back view 138 Unit mm Panel cutout dimensions 139 3 Cable Applicable panel thickness 1 0 to 5 0 mm Unit mm Connector Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 6 GT12 Mounting panel 146_ 109 8 Display unit Back view Unit mm Panel cutout dimensions 139 6 Applicable panel thickness 1 0 to 5 0 mm 40 SD memory card Soe Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 67 3 7 1 7 GT21 _Panel thickness 5mm Mounting panel Attachment fitting 99 Display unit 142 Unit mm Installation dimensions Cable Connector Panel cutout dimensions 130 3 Applicable panel thickness 1 0 to 5 0 mm o Unit mm Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 8 GT32 GT32M 4 0 35 1 2 0 packing 66 1188 S olo RS lt x o Panel thickness When installing Smm connector 116 2 Displa
7. Note5 It is available for GT12M1 and GT12G1 only Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 6 4 Interface Specifications GT12 Interface for connecting PLC External devices COM port Specifications AIG12 Q12D AIG12 Q14D AIG12 Q13D AIG12 Q15D RS232C type RS422 RS485 type oe eee to RS232C Conforms to RS422 Non insulation type Non insulation type Communication condition with external ponies Stop bit bi fp Total length Baud rate 19200 bit s Baud rate 115200 bit s MEWTOCOL Protocol for PANASONIC PLC FP series General purpose serial PANASONIC dedicated ior Other companies PLC protocols For the details refer to the latest GTWIN HELP Note1 It is internally isolated from the input power supply side between 24V and OV Note2 The and terminals are the power supply terminals for driving the main unit Note3 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Interface for transferring screen data USB port item O Specifications Communication standard USB1 1 Connector shape N USB MiniB type 5pin Male Trasmission distance Max 5m No of connected unit with PC 1 unit Note1 Take care of handling of the connector not to add an excessive static electricy on the metal part
8. 2 When bringing up the keyboard screen during data input an unregistered keyboard screen number was specified 2 Create and register keyboard screen or specify the correct keyboard number 3 GT configuration data and keyboard screen data exist in the GT but there is no base screen data 3 Transfer base screen data from GTWIN 4 Press ESC button to return to the previous screen Screen displays Memory is Full The total capacity of transferred base screen data exceeds the memory capacity of the GT Delete part of the base screen data so that the capacity doesn t exceed the total capacity Data capacity can be checked by going to View V gt Memory Usage Conditions on GTWIN menu bar When the data capacity is not over the limit invalid data could possibly be remaining in the GT When transferring data do so after deleting the screen An unspecified screen appeared there is trouble when switching screens 1 The screen specification in the PLC screen setting the GT switch part or the auto paging is wrong 1 Specify the correct screen number 2 The startup screen is specified in the GT configuration settings GTWIN 2 Check the start up screen setting for the GT configuration settings in GTWIN Delete unnecessary settings and re transfer configuration data 3 An erroneous device or value is specified in the first word of the basic communication area word device
9. eeseeseeseeereeeerrrsseerresrrresrrrrssrernssna 3 4 3 1 3 Installation Space eden eed iai aea i iaa aa eee 3 4 3 14 UL c UL Qualification iiciin aii eead i aai ea aanta iai 3 4 3 1 5 Mounting Screws s n ieirsi deiren ii hee elie neidia in eile ain aia Ei a tala 3 5 3 1 6 GT01 and GT11 Installation Method cccccceceeeecceeee cece eeceneaeeeeeeeeesecueeeeeeeeeeeeneees 3 6 3 1 7 GT21 Installation Method ccccccceceeeccececeeeeeeeeeeaeeeeeeeeeeecaeceeeeeeeeseesncieeeeeeeeneeeiaes 3 6 3 1 8 GT05 GT32 GT32 E Installation Method ccccccccescecesesceeeesseseeeeseeeeeeeseeeeesseaeeess 3 7 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 9 GT02 GT02L GT12 Installation Method ccccccccceceeeseeeeeeeeeceeeeeeeeseeeeeseeeeeseaeenenees 3 8 3 1 10 Installing in Vertical Orientation 0 0 0 eee ee eene cece sent a a a 3 9 3 1 11 Precaution When reinstalling GT oe cece ee ente reer ee T TAE 3 9 3 2 Wiring the Power Supply i se neiaa aan aeaaea aa aaen e aaa aa eaaa a aaa aa aa da aaa aaa aaa SE 3 10 3 2 1 Wma the Power SUPPI oriire eaa R EE I ET 3 10 3 2 2 TOUN iaa TE T T EO 3 11 3 3 Wining he COM POT a e a ea aaee ae aa aa aaoo eaa aaaea aa aianei 3 12 3 4 Precautions when Wiring COM Port ssssssnssennsennennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 3 14 3 4 EARO 6 WDC EE E TE TT E E T E TN 3 14 3 4 2 GTO2 GTO2L 5 V DC Ja tosniriiiee rin
10. Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Required items for connection e LAN cable Either straight cable or crossing cable can be used MDI MDI X Automatic crossover function Settings for Ethernet connection Follow the procedure below to communicate with the Ethernet connection 1 Connect the GT to a PC with a Ethernet cable 2 Specify the settings such as IP address for the GT 3 Startup the GTWIN and specify the communication condition The factory settings are as follows IP Address 192 168 1 5 Subnetmask 255 255 255 0 Default Gateway 192 168 1 Port No 9094 Note Setting items such as IP address for the GT can be specified in the System Menu GTWIN setting Communication Settine Network type Ethernet Network Type Ethemet z Title Input an arbitrary title Up to 38 one byte Title characters Default rai m Computer ey hhitialize 7 a Sane Check Acquire IP address automatically Acquire IP address automatically eee The default setting is to use the IP address IP address n 254 84 currently being used in the computer Port No 9094 0 1025 32767 Click OK to finish the setting Station No 6f 1 64 Destination Note When sing multiple Ethernet cards IP address 192 168 10 10 specify manually Port No 9094 1 32767 Station No 1 64 Communication Time out Sec Connect
11. Pure black AIG12GQ02D atizet 320x120 TOOL port Silver AIG12GQ03D dots RS232C RS422 Pure black AIG12GQ04D compliant 3 color RS485 Silver AIG12GQ05D COM port LED pso32c_ Pure black_ AlG12GQ12D USB port green Silver AIG12GQ13D USB1 1 red orange Pure black AIG12GQ14D GT12G1 compliant ge R422 with SD memory RS485 card slot Silver AIG12GQ15D 256 color Pure black AIGT2230B STN color COM port 1 color RSA Silver AIGT2230H TOOL port 5V GT21 GT21 LCD LED Pure black AIGT2232B RS232C DC RS422 320x240 compliant white RS485 Sil AIGT2232H dots p ilver Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net COM port Item Interf Power pa e Model Display be ass Backlight owe nication Body color Model No name specifi cations supply specifi cation STN Pure black AIG32MQ02D mono RS2320 T Silver AIG32MQ03D chrome COM port Pure black AIG32MQ04D STEN LCD USB port RS422 320x240 USB1 1 RS485 Silver AIG32MQ05D dots compliant with SD memory Pure black AIG32TQ02D GT32T0 card slot RS232C Siver AIG32TQ03D ay RS422 Pure black AlG32TQ04D GT32 1096 CFL DC RS485 Silver AIG32TQ05D COM port Pure black _ AIG32TQ12D l Eo USB port RS282C f Silver AIG32TQ13D LCD USB1 1 320x240 compliant P
12. 100 MQ or more 500 V DC measured with megohmmeter in initial status 5 to 9 Hz amplitude 3 5 mm 9 to 150 Hz acceleration 9 8 m s 10 sweeps each in X Y and Z directions 1 octave min 1000 V P P or more Pulse width 50 ns 14s between power supply terminals based on in house measurements IP67 Initial value evaluated by us Protective construction Dustproof and waterproof from front panel only packing used on panel contact surface N Note1 Not isolated between the USB port COM port and the internal digital circuit Note2 When using our exclusive cable Note3 When installing the unit again replace the water proof packing Insulation resistance 6 22 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 6 2 Performance Specifications GT12 Item Specifications GT12M GT12G Display device STN monochrome LCD Resolution 320 W x 120 H dots Displayable 108 78 W x 40 78 H mm area Gradation 2 gradation 8 gradation Selectable with GTWIN Display 3 color LED bakclight 3 color LED backlight Backlight white pink red green orange red Backlight Backlight brightness can be adjusted on the menu screen or GTWIN brightness configuration settings There are some minor variations in the backlight brightness Contrast Contrast can be adjusted on the menu screen Touch switch A
13. AlGO2GQ04D be RD Receive data GT lt External device AlGO2GQ05D RD Receive data GT lt External device E Terminal resistance az Note There is no RS and CS control lines 24 V RS232C type Pin name Name Signal direction Product No 71 24 V 5 AIG02MQ12D A OV AIG02MQ13D SD4 n FG Functional ground AIGO2MQ22D ne ss SD Send data GT External device AIGO2MQ23D cs So RD Receive data GT lt External device AIGO2GQ12D SG RS Request to send GT External device AIGO2GQ13D CS Clear to send GT lt External device AIGO2GQ22D SG Signal ground AIG02GQ23D 24 V RS422 RS485 type Pin name Name Signal direction Product No i 24 V Z AIG02MQ14D A ke zm OV i AIG02MQ15D SD gt FG Functional ground AIGO2MQ24D ek SD Send data GT External device AlGO2MQ25D RD O SD Send data GT External device AIG02GQ14D E RD Receive data GT lt External device AlGO2GQ15D RD Receive data GT lt External device AIG02GQ24D E Terminal resistance z AIG02GQ25D There is no RS and CS control lines Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 2 3 GTO2L 5 V RS232C type Pin name Name Signal direction Product No 5V ls z OV z ns 5 FG Functional ground RD IX SD Send data GT External device g RD Receive data GT lt External device AIGO2LQ02D SG S RS Reque
14. Registerable screen number Base screen No 0 to 3FF Keyboard screen No 0 to 7 Login screen No 0 to F Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function switch Lamp Message Data Bar graph Clock Note2 3 Line graph Alarm list Keyboard Custom message lamp switch Main functions X4 Recipe SD recipe Flow display Write device Multi language exchange Operation security GT link PLC multiple connection Data logging FP monitor Note5 Through function Connecting a computer to USB port and our PLC to COM port enables the communication between the PLC and the computer Copy function Screen data can be copied with a SD memory card GTWIN ver Ver 2 A0 or later Note1 Maximum allowable number varies depending on registered contents Note2 External clock data can be referred and displayed Note3 Accuracy of the GT internal clock is 180 seconds per month Note4 It depends on the version of GT Note5 It is available for GTO2M2 and GT02G2 only Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 2 4 Interface Specificat ions GT02 Interface for connecting PLC External devices COM port Item Specifications RS232C type RS42
15. 6 4 4 Interface Specifications GT05 Interface for connecting PLC External devices COM port AIGOSMQ02D AIGOSMQ03D AIGOSMQ04D AIGOS5MQ05D AIGOSGQO2D AIGOSGQ03D AIGOSGQ04D AIGOSGQ05D AIGOSSQO2D AIGOSSQ03D_ __AIGOSSQ04D AIGO5SQ05D oa A dea to RS232C Non Conforms to RS422 Non insulation type N insulation type N Communication Stop bit bit fp Total length Baud rate 19200 bit s Baud rate 115200 bit s MEWTOCOL Protocol for PANASONIC PLC FP series General purpose serial PANASONIC dedicated catia Other companies PLC protocols For the details refer to the latest GTWIN HELP Note It is internally isolated from the input power supply side between 24V and OV Note2 The and terminals are the power supply terminals for driving the main unit Note3 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Interface for transferring screen data USB port aaa ee Specifications Communication standard USB1 1 Connector shape TYPE B Trasmission distance Max 5m No of connected unit with PC 1 unit Note1 Take care of handling of the connector not to add an excessive static electricy on the metal part of the connector SD memory card slot ltem Specifications Support media SD memory card SDHC memory card Supported format standard Conforms to SD standar
16. Ethernet port RJ45 GT32T1 This is a connector for connecting the screen creation tool The maximum baud rate is 115200 bps when using Ethernet SPEED lamp GT32T1 It shows the baud rate when using Ethernet Light on During 100Base communication Blinking During 10Base communication LINK ACT lamp GT32T1 it shows the state of communciation with Ethernet Light on When linked Blinking While data reception Sound output jack GT32T1 Insert the speaker with a 3 5 mini plug amplifier for using the audio output function spD memory access lamp Except GT12M0 and GT12G0 The lamp turns on while accessing a SD memory card Battery cover When using a backup battery to be separately purchased open this battery cover to install it The clock PLC device hold data alarm history and GT internal device hold data functions can be used with the backup battery 0 Operation mode seiting switches Setting the operation mode setting switches as follows when turning on the power supply enables the setting to inhibit to move to the system menu or enables to clear F ROM Normal use Inhibit system Factory default menu shift switch seting dbl WE WERE 1234 1234 1234 Setting Clear F ROM n amp Mounting location of connector for battery G COM port PLC external device connection port and power supply terminal This is a communication port RS23
17. Interface for transferring screen data USB port Po i oem Specifications i O Communication standard Connector shape USB MiniB type 5pin Male Trasmission distance Max 5m No of connected unit with PC 1 unit Note1 Take care of handling of the connector not to add an excessive static electricy on the metal part of the connector Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 4 GT05 6 4 1 General Specifications Rated voltage Operating voltage range Power consumption Insulation method of power supply part Ambient temperature Ambient humidity Storage temperature Storage humidity Breakdown voltage Insulation resistance Note1 Vibration resistance Shock resistance EC Directive applicable Noise immunity Protective construction Weight GTO5M GT05G 24 V DC 21 6 to 26 4 V DC 3 6 W or less 150 mA or less Transformer insulation 0 to 50 C 20 to 85 RH at 25 C non condensing 20 to 60 C 10 to 85 RH at 25 C non condensing Between power supply terminals and case 500 V AC for 1 minute Cutoff current 10mA at default setting Between power supply terminals and case 100 MQ or more 500 V DC measured with megohmmeter at default setting 10 to 55 Hz 1 minute cycle Amplitude 0 75 mm 10 min on 3 axes 98 m s or more 4 times on 3 axes EN61131 2 EMC Directive
18. Operation security GT link PLC multiple connection Data logging FP monitor Through function Connecting a computer to Ethernet port or USB port and our PLC to COM port enables the communication between the PLC and the computer This function is not available for PLCs manufactured by other companies Notes Copy function Screen data can be copied with a SD memory card GTWIN ver Ver 2 80 or later Note1 Maximum allowable number varies depending on registered contents Note2 External clock data can be referred and displayed Note3 Accuracy of the GT internal clock is 180 seconds per month Note4 The sound output function is available for GT32T1 only Item Main functions N Note5 An Ethernet port is available for GT32T1 only Note6 It depends on the version of GT 6 32 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 8 4 Interface Specifications GT32 Interface for connecting PLC External devices COM port AIG32MQ02D AIG32MQ03D AIG32MQ04D AIG32MQ05D AIG32TQ02D AIG32TQ03D AIG32TQ04D AIG32TQ05D AIG32TQ12D AIG32TQ13D_ _AIG32TQ14D AIG32TQ15D A ane to RS232C Conforms to RS422 Non insulation type Non insulation type N Communication Stop bit bit fp Total length Baud rate 19200 bit s Baud rate 115200 bit s MEWTOCOL Protocol for PANASONIC PLC FP series General purpose
19. Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Wiring method 1 Remove the sheath from the wire 7mm 2 Insert the wire all the way into the terminal block and tighten the screw in the clockwise direction to secure it Precautions concerning wiring The following precautions should be observed to avoid broken or disconnected wires e When removing the sheath be careful not to scratch the core wire e Wire the terminal without twisting the core wire e The core wire should be connected without soldering it Vibration can sometimes cause soldered connections to break loose e After connecting the wiring avoid subjecting the cable to stress e Because of the construction of the terminal tightening the wire in the counterclockwise direction will cause a faulty connection If this happens disconnect the wire check the terminal hole and connect the wire again Clockwise Counterclockwise A Ka Reference For information on connecting the COM port of the GT series with various PLC units refer to lt Chapter 4 Connecting with the PLC gt Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 4 Precautions when Wiring COM Port Precautions are different depending on communication conditions Arrange wirings according to the following instructions 3 4 1 GTO1 5 V DC RS232C type Perform wiri
20. Cassette rear switch z Short So Sr of COM1 ON circuit COM2 ON COM2 Baud rate Note As for the connection to the and for the COM2 make the same connection as the and for the COM1 PLC multiple communication PLC side Terminal unit PLC side General unit T Terminal block Terminal block a GT side 24V DC RS422 485 Pin name to E COM1 O COM1 COM2 COM2 Not used _ Not used O COM1 2 COM1 0 COM2 Not used Not used Cassette rear switch Cassette rear switch Short COM1 0N circuit COM2 0N COM2 COM2 Baud rate Baud rate Note As for the connection to the and for the COM2 make the same connection as the and for the COM1 GT Link Function PLC side T GT side General unit Topoi r GT side Terminal unit Terminal block O POWET 24V DC RS422 485 p 24V DC RS422 485 suppl Yy Signal vi O O COM1 COM1 COM2 COM2 Notused Notused 0o00 9 99 0 Cassette rear switch COM1 0N Short COM2 0N circuit com2 Baud rate Note As for the connection to the and for the COM2 make the same connection as the and for the COM1 IEF ne Note Check the usable GT models for 1 N communication Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 4 RS485 Connection with FPX COM Port C
21. Not used Notused C D a ae Cassette rear switch Short circuit IEF ner Note Check the usable GT models for 1 N communication Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Connecting to the 1 channel type RS485 and 1 channel type RS422 AFPX COM4 1 1 communication PLC side O Terminal block aa coma sD SD R3485 AS232C RD RD Poses SG SG gt DODD Cassette rear switch GT side 24V DC RS422 485 gt PLC multiple communication PLC side Terminal unit PLC side General unit Terminal block Terminal block ped cr GT side 24V DC RS422 485 sD Cassette rear switch Cassette rear switch Short ON OFF circuit GT Link Function PLC side m GT side General unit T GT side Terminal unit Terminal block o na 24V DC RS422 485 O POWEr 24V DC RS422 485 supply vi Se R a C ov so sD FG FG RD RD gt o A SD SD ee o SD SD Cassette rear switch i RD RD o sno e e circuit IES ne Note Check the usable GT models for 1 N communication Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Connecting to the 2 channel type RS485 AFPX COM6 1 1 communication PLC side Terminal block po sca GT side 24V DC RS422 485 ame H COM1 c 24V oe COM2 gadeo Not used Notused O A BIDIA A
22. STN eoincad RS232C AIGO2LQ02D monochro USB Bar 1 color GT0O2L GTO2L me LCD LED 5VDC RS422 Black 160x64 USB tt white RS485 AIS02LQ04D compliant dots 3 color Pure black AIGO5MQ02D RS232C GTOSM LED Silver AIGO5MQ03D STN white RS422 Pure black AIGOS5MQ04D monochro red pink RS485 Silver AIGO5MQ05D me LCD COM port 3 color REE Pure black AIGO5GQ02D 320x240 USB port LED Silver AIGO5GQ03D dot 3 GT05 GT05G ots USB1 1 green 24 V anes Pure black AIGO5GQ04D compliant red DC with SD memory orange RS485 Silver AIGO5GQ05D L card slot 4096 eae Pure black AlGO5SQ02D color STN 1 color Silver AIGO5SQ03D GT05S color LCD LED ayer Black AIGO5SQ04D 320x240 white dots RS485 Ashgray AIGO5SQ05D 3 color Black AIGT2030B RS232C a LED Ashgray AIGT2030H sonochro COM port green red RS422 Black AIGT2032B TOOL port orange 24V RS485 Ashgray AIGT2032H GT11 GT11 me LCD RS232C DC Black AIGT2130B 240x96 liant 1 color RS232C dots compliant LED Ashgray AIGT2130H white RS422 Black AIGT2132B RS485 Ashgray AIGT2132H COM port Pure black AlIG12MQ02D Satie TOOL port Beate Silver AIG12MQ03D RS232C RS422 Pure black AlG12MQ04D compliant ee RS485 Silver AIG12MQ05D COM port TERA Pure black AIG12MQ12D USB port white Silver AIG12MQ13D GT12M1 USB1 1 red pink Pure black AIG12MQ14D compliant RS422 STN with SD memory RS485 Silver AIG12MQ15D monochro card slot 24V GT12 meLCD COM port DC Rs232
23. TERMINATE to on Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 RS485 Connection 4 4 1 Difference of Terminal blocks Between GT Models Although the terminal blocks vary between the 5 V DC type and 24 V DC type the connection method is the same The connection diagram is described with the terminal block for 24 V DC 24 V DC type 5 V DC type GT01 5 V DC type GT02 GTO2L GT side 24V DC RS422 485 GT side 5V DC RS422 485 GT side 5V DC RS422 485 Pin name Signal Pin name Signal Pin name Signal Note RS485 communicatoin is performed using the RS422 terminal blocks Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 2 RS485 Connection with FPOR COM Port Connecting to the COM port To power supply GT series Usable models PLC PLC communication cable Programmable display FPOR RS485 type Loose wire cable 5 V DC SA DG RS422 RS485 type Connecting to the COM port of FPOR FPOR AAP 1 1 communication supply PLC side Pin name Signal S Jo R G E PLC multiple communication PLC side PLC side GT Link Function supply PLC side Pin name Signal Pin name Signal To power GT side 24V DC RS422 485 To power GT side 24V DC RS422 485 Pin name Signal To power
24. Version of GT21 and available functions Function GT21 GTWIN Parts Switch 1 00 or later 2 70 or later library Lamp 1 00 or later 2 70 or later Message 1 00 or later 2 70 or later Data 1 00 or later 2 70 or later Bar graph 1 00 or later 2 70 or later Clock 1 00 or later 2 70 or later Line graph 1 00 or later 2 70 or later l History 1 00 or later 2 70 or later List 1 00 or later 2 70 or later Keyboard 1 00 or later 2 70 or later Custom 1 00 or later 2 70 or later Other Recipe Recipe 1 00 or later 2 70 or later functions SD recipe Not available Not available Flow display 1 00 or later 2 70 or later Write device 1 00 or later 2 70 or later Sound Not available Not available Password 1 00 or later 2 70 or later Password F Operation security Not available Not available Multi language exchange 1 00 or later 2 70 or later Logging function Not available Not available Display panel sideways setting 1 10 or later 2 71 or later Copy Cable between GTs 1 10 or later SD memory card Not available Not available GT link Not available Not available PLC multiple connection Not available Not available Note1 Summer time cannot be set xvi Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Version of GT32 and available functions
25. computer 1 3 2 Software Usage Environment and Applicable Cables Screen creation tool software Terminal GTWIN Ver 2 Software type Required OS Hard disk capacity Product No English Terminal GTWIN Ver 2 language Windows 7 AIGT8001V2 version Windows Vista 400 MB or more Terminal GTWIN Ver 2 English Windows 2000 i language Windows XP AIGT8001V2R Upgrade model version Note1 The latest version is provided free of charge via our website User registration is required Free of charge Related software Freeware Item name Contents Configurator WD IP address search tool Address setting for the GT in Ethernet communication Note It can be downloaded from our website User registration is required Free of charge 1 12 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Screen transfer cable For connection between PC USB and Programmable Display GT02 GT02L GT05 GT12 GT32 USB cable Commercial product Applicable model Cable type Length se h Ber IES pee USB2 0 or 1 1 AB type Max 5m GT32 E z USB2 0 or 1 1 cable a e i mo D GT02 GT02L GT12 A type Mal mifiB typ mal Max 5m Note Windows 2000 or later OS is required for the communication with a USB For connection between PC RS232C and Programmable Display GT01 GT11 GT21 D sub connect
26. settings to be on Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Operation security function Message Cause Solution Incorrect password Is displayed on the login screen An unregistered password was entered Enter the registered password Incorrect password Is displayed on the password change screen An incorrect password was entered in the Current password field Enter the registered password correctly Please verify your password again Is displayed on the password change screen The entered New password and Confirm password are different Enter the same password in the New password and Confirm password fields Use another password Is displayed on the password change screen The password that has been already registered is tried to be registered Enter an unregistered new password Password setting incomplete Is displayed on the password change screen There are items that are not entered Enter all items Your password cannot be deleted Is displayed on the password management screen Your password was tried to be deleted Your password cannot be deleted If you want to delete it delete from the Operation security password edit on GTWIN Your level cannot be changed is displayed on the password management screen Your lev
27. 4 BIN HEX BCD Code Correspondence Table cccsecssseeeseeeeeeeeeeeeeeeseeeseneeeeneeneeees 7 14 7 ASCII Code Table uit cciccseccscetecectneteteacecent cones cetepeceestennseteetncecesteensttacupececeestnseatdaeceretteanerses 7 15 Record of changes Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Before You Start Usage conditions Operating environment Use the unit within the range of the general specifications when installing Ambient temperatures 0 to 50 C It varies according to models when installing the unit in a horizontal orientation or using a C NET adapter and FP programmer II Ambient humidity 20 to 85 RH at 25 C non condensing Altitude of 2000 m or less For use in pollution Degree 2 environment Do not use it in the following environments Direct sunlight wind and rain This product is not designed for outdoor use Sudden temperature changes causing condensation Inflammable or corrosive gas Excessive airborne dust metal particles or saline matter Benzine paint thinner alcohol or other organic solvents or strong alkaline solutions such as ammonia or caustic soda Direct vibration shock or places always exposed to drop of water This unit is warranted by IP65 IP67 depending on models for panel mounting however this ap
28. AFPX COM1 gt Y COM1 Connecting to the 2 channel type RS232C AFPX COM2 To power supply tt COM2 PLC side C RS232C connection as S1 and S2 GT side 24V DC RS232C Pin name Signal As for the connection to S2 and R2 for COM2 make the same Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Connecting to the 1 channel type RS485 and 1 channel type RS232C AFPX COM4 supply GT side 24V DC RS232C Pin name Signal coma K PLC side Connecting to the 1 channel type Ethernet and 1 channel type RS232C It cannot be connected with Ethernet AFPX COM5 To power supply GT side 24V DC aoe O O h COM5 PLC side AD O 3 B B gt O o o 80 h R OB Of Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 2 4 RS232C Connection with FPE COM Port Connecting to the COM port To power supply GT series Usable models PLC PLC communication cable Programmable display 5VDC FP Loose wire cable 24V DC RS232C type Connecting to the 1 channel type RS232C AFPG801 GT side 24V DC RS232C To power supply i Pin name Signal PLC side FPG COM1 AFPG801 RS232C FPS 099899
29. Explanation of this function Conditions when the automatic settings mode is in effect If communication is attempted the specified number of times and there is no response from the PLC the GT goes into the automatic settings mode The number of attempts is specified using the No of Retries parameter under GT Configuration Communication Parameters Handle Communication Error on GTWIN Automatically set communication conditions In the automatic settings mode if there is a response from the PLC subsequent communication is carried out under conditions matching the response The main unit configuration settings are not updated however even if the communication parameters are different from those of the main unit configuration settings z Note An error response from the PLC is taken as a response and the GT does not go into the automatic settings mode If the unit is connected to the COM port of the FPO FP1 FP2 FP2SH FP M communication between the FP device and the PLC will not be possible if the target usage of the RS232C port has not been set to Computer Link Always set the setting on the PLC side to match Computer Link The automatic communication settings function cannot be used for the communcation at 230400 bps on the GT01 GT11 or GT21 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 5 2 Through Function With the GT series
30. GT side 24V DC RS422 485 Pin name Signal supply AA supply To power GT side 24V DC RS422 485 4 19 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 3 RS485 Connection with FP X COM Port To 24 V power supply PERRAAAAAAR PRQQ S OdE E Ge re GT series RII CRICI CIM WD Usable models PLC PLC communication cable Programmable display AFPX COM3 5VDC FP X AFPX COM4 Loose wire cable 24V DC RS422 RS485 type AFPX COM6 Connecting to the FP X Communicatoin cassette 1 channel type RS485 RS422 AFPX COM3 1 1 communication A A PLC side K Terminal block aponye GT side 24V DC RS422 485 supply com3 Pin name Signal tt S S R Not used R Not used Not used Not used Cassette rear switch Short Not ON circuit No 2 ON No3 ON No 4 ON PLC multiple communication PLC side Terminal unit PLC side General unit T r Terminal block Terminal block Supply GT side 24V DC RS422 485 4 S S 4 R Not used R Not used e Not used ___ Not used Not used Not used Cassette rear switch Shor circuit L o GT Link Function PLC side Topower GT side General unit To power GT side Terminal unit Terminal block supply 24V DC RS422 485 supply 24V DC RS422 485 i4 rv S s z R Not used R Notused
31. LCD panel not defects or failures of the product Note2 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Note3 A battery is necessary for SRAM backup The unused part of 27 kbytes for Alarm history and line graph sampling can be used for the logging function Note4 Please purchase a battery separately The battery life is the value when no power at all is supplied The actual lifetime may be shorter according to the condition of use SRAM Note3 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 9 3 Function Specifications GT32 E Specifications Item GT32M E GT32T E Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double quadruple or octuple in height and width True Type GTWIN 10 to 240 dots Windows R 10 to 240 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of Approx 180 screens registerable screens Registerable screen Base screen No 0 to 3FF number Keyboard screen No 0 to 7 Login screen No 0 to F Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Sw
32. Message 1 00 or later 1 00 or later 2 97 or later Data 1 00 or later 1 00 or later 2 97 or later Bar graph 1 00 or later 1 00 or later 2 97 or later Clock 1 00 or later 1 00 or later 2 97 or later Line graph 1 00 or later 1 00 or later 2 97 or later Alarm History 1 00 or later 1 00 or later 2 97 or later List 1 00 or later 1 00 or later 2 97 or later Keyboard 1 00 or later 1 00 or later 2 97 or later Custom 1 00 or later 1 00 or later 2 97 or later Other Recipe Recipe 1 00 or later 1 00 or later 2 97 or later functions SD recipe 1 20 or later Not available 2 A0 or later Flow display 1 00 or later 1 00 or later 2 97 or later Write device 1 00 or later 1 00 or later 2 97 or later Sound Not available Not available Not available Password 1 00 or later 1 00 or later 2 97 or later Password A 7 Operation security 1 00 or later 1 00 or later 2 97 or later Multi language exchange 1 00 or later 1 00 or later 2 97 or later Logging function 1 10 or later Not available 2 98 or later FP monitor function 1 60 or later 1 60 or later 2 C0 or later Display panel sideways setting 1 00 or later 1 00 or later 2 97 or later Copy Cable between GTs Not available Not available Not available SD memory card 1 00 or later Not available 2 97 or later GT link 1 00 or later 1 00 or later 2 97 or later PLC multiple connection 1 00 or later 1 00 or later 2 97 or later XV Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net
33. Note Logging data of Logging function 64 kbytes Hold GT Device 2048 255 words Hold PLC Device 24 words Built in clock data Alarm history data Battery Backup Line graph sampling data Note3 Logging data of Logging function Internal device hold data Hold PLC Device data Life Approx 5 years at 25 C Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Note2 It is available for GTO2M2 GT02G2 only A battery is necessary for SRAM backup The unused part of 27 kbytes for Alarm history and line graph sampling can be used for the logging function Note3 It is available for GTO2M2 GT02G2 only Please purchase a battery separately The battery life is the value when no power at all is supplied The actual lifetime may be shorter according to the condition of use Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 2 3 Function Specifications GT02 Item Specifications Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double quadruple or octuple in height and width True Type GTWIN 10 to 96 dots Windows R 10 to 96 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of registerable screens 250 screens N 8
34. Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 3 6 When Connected to Modbus For GT01 GT11 and GT21 Code No Content Cause and solution 1 PLC connection cable is disconnected Check the wiring of Time up error the connection cable and check for disconnection ERFF There is no response 2 It is a temporary error caused by noise etc Turn on the from the PLC f power supplies for PLC or GT again Response error There is an abnormal ERFE response returned Check the data to be returned from the external device from the external device For GT02 GT02L GT05 GT12 GT32 and GT32 E Code No Content Cause and solution 1 PLC connection cable is disconnected Check the wiring of Time up error 3 PA the connection cable and check for disconnection 0001 There is no response 2 It is a temporary error caused by noise etc Turn on the from the PLC F power supplies for PLC or GT again Response error There is an abnormal ERFE response returned Check the data to be returned from the external device from the external device 5 3 7 When Connected to a PLC Made by Toshiba Machine Co Ltd For GT02 GT02L GT05 GT12 GT32 and GT32 E Code No Content Cause and solution ERFFFE Parameter errror The specified parameter does not exist or it cannot be used Phone 800 894 041
35. Settings Function 00 0 eceeeee etter eee eeteeeeetteeeeetneeeeeeee 4 28 4 5 2 Through FUNCHON inic cectencoees aeceveectecevetaaceves ceded ER eieae Leaked vs aia ria Nerbini 4 29 4 5 3 How to Make Communication Settings Using the FPWIN GR seese 4 31 Chapter 5 Troubleshooting a ciciscscdeiciescivissesasciaccesdivscussdudasunedsdusnesietvanwasaace 5 1 5 1 What to DO If Something Unusual Occurs GT01 GT11 GT21 eesseeseeeeeetneteees 5 2 5 2 What to DO If Something Unusual Occurs GT02 GT02L GT05 GT12 GT32 5 5 5 3 Error Codes and How to Handle Theim cccssccsseeeseeeeseeeesseesesneeenseeeseneseseeseseeeeeeees 5 10 9 9 About Error Code s 2 4 cc Acaisiecis eas snceges saceegueiceved FITERE RA a ates 5 10 nae Gi Series Emor Codesii gi i eve tit ARA EAA EAT RAEE at eee ate meee 5 10 5 3 3 When Connected to a FP Series PLC 0000 eee eeeeneeeeeeneeeeeenaeeeeeeaeeeeeeaeeeeeeeaes 5 13 5 3 4 When Connected to a PLC FX Series Made by Mitsubishi Electric Corporation 5 15 5 3 5 When Connected to a PLC Made by Omron Corporation ccceeeeeeeeeeeeeeeenaes 5 16 5 3 6 When Connected to Modbus cecececeeeceeeeeeeeeeeeeeeaeeeeeeaaeeeeeeaeeeeedeeeeeeenieeeeseaes 5 17 5 3 7 When Connected to a PLC Made by Toshiba Machine Co Ltd eee 5 17 5 3 8 When Performing General purpose Serial Communication 2 ceeeeeeteeeeee 5 18 Chapter 6 Specifications cccccceeeeseeeeeeee
36. X 4 Recipe Flow display Write device Multi language exchange Through function Connecting a computer to TOOL port and our PLC to COM port enables the communication between the PLC and the computer Copy function 5 The screen data can be copied by connecting the main units with a cable GTWIN ver Ver 2 70 or later Note1 Maximum allowable number varies depending on registered contents Note2 A clock part can be indicated by referring to external clock data Note3 Accuracy of the GT internal clock is 180 seconds per month Note4 It depends on the version of GT Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 7 4 Interface Specifications GT21 Interface for connecting PLC External devices COM port EEE eee Non insulation type Non insulation type Communication condition with external devices Transmission distance Max 15 m Max 500 m MEWTOCOL Protocol for PANASONIC PLC FP series General purpose serial PANASONIC dedicated protocol Other companies PLC protocols For the details refer to the latest GTWIN HELP Note1 The and terminals are the power supply terminals for driving the main unit Note2 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Interface for transferring screen data TOOL port
37. advance or connecting to a PC the operational check of equipment in the actual environment the start up of equipment and daily maintenance work can be performed efficiently Logging file 2 pT Logging file 16 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 1 2 Types of Units 1 2 1 GT Series COM Item Interface specifi Power Kan iront Model Display SISP Backlight P panel Model No name cations supply nication coios specifi cation Black AIGT0030B1 A RS2920 Ashgray AIGT0030H1 oa RS422 Black AIGT0032B1 ics RS485 Ashgray AIGT0032H1 ie eg Rs232c _Black AIGT0030B 24V Ashgray AIGT0030H orange DC RS422 Black AIGT0032B cae RS485 Ashgray AIGT0032H Rs232 Black AIGT0130B1 Bone Ashgray AIGT0130H1 STN 7 COM port ei RS422 Black AIGT0132B1 monochrom TOOL port mares RS485 Ashgray AlGT0132H1 GT01 eLCD LED RS232C i Black AIGT0130B 128x64 l white RS232C dots compliant 24 V Ashgray AIGT0130H DC RS422 Black AIGT0132B RS485 Ashgray AIGT0132H Pure black AIGT0230B1 SDG RS2320 Silver AIGT0230H1 3 color RS422 Pure black AIGT0232B1 atin LED RS485 Silver AIGT0232H1 white rgo300 pure black AIGTO230B red pink 24V Silver AIGT0230H DC RS422 Pure black AIGT0232B
38. be executed in the operation mode Data error ER10 A data error occurred Check for errors in the communication conditions settings during communication Overrun error ER12 The GT cannot receive PLC runaway might be the problem data Numerical data error Verify whether or not the reference device used with the basic ER15 Designated read write communication area and each part is a readable and writable area e Error codes other than these are based on Omron PLC error codes e Be sure to used the PLC in monitor mode Otherwise communication will not work properly For GT02 GT02L GT05 GT12 GT32 and GT32 E Code No Content Cause and solution Cannot be executed due to operation mode The PLC received the Change the mode of the PLC from the operation mode to the ER0001 command that cannot monitor mode be executed in the operation mode Data error ER0010 A data error occurred Check for errors in the communication conditions settings during communication Overrun error ER0012 The GT cannot receive PLC runaway might be the problem data Numerical data error Verify whether or not the reference device used with the basic ER0015 Designated read write communication area and each part is a readable and writable area is wrong area e Error codes other than these are based on Omron PLC error codes e Be sure to used the PLC in monitor mode Otherwise communication will not work properly
39. communication can be set to take place automatically between the COM port of a GT and TOOL port of a PLC in a through function When the FP series tool software installed in the computer connected to the GT series as shown below is booted PLC programs can be edited through the GT series The through function does not require any special settings and is always in the standby mode For TOOL port type Cable connected to FP series PLC lt the TOOL port PLC debugging aed Screen data The FPWIN or other software can be cable being sent booted on the computer being used to AFC8503 and received edit GT series screens and PLC programs edited and monitored through the GT series Screen creation tool GTWIN FP series programming tool FPWIN GR For USB port type Screen creation tool GTWIN FP series programming tool FPWIN GR The FPWIN or other software can be booted on the computer being used to edit GT series screens and PLC programs edited and monitored through the GT series FP series PLC a USB cable or Screen data LAN cable being sent GT32T1 and received PLC debugging Cable connected to the TOOL port Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net LOO Note e Precautions when using the through function The system should be set up so that the Timeout period in the FP series software FPWIN A is larger than the waiting time for commun
40. communication methods to PLCs support RS232C RS422 RS485 Also it can be connected to PLCs manufactured by other companies Structure adapted to surrounding environments IP65 It has a dust proof waterproof and drop proof structure IP67 for GT02 GT12 and GT32 E High intensity LED provided LED backlight type As the high intensity LED is provided the screen is bright and the backlight does not need to be replaced Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Saving various data with a SD memory card Model equipped with SD memory card slot Various data can be saved and read out with a SD memory card GT lt gt i gt A DA L GT data such as data screens GT configuration settings Stored files with Logging function SD recipe data Alarm history data J Power can be supplied to the 5 V DC type with only one communication cable The power is supplied from the TOOL port of a PLC therefore the wiring man hours can be significantly reduced TOOL port E Pe Applicable models Sew i fay Panasonic FP series TT P Mitsubishi Electric Corporation FX Power supply amp communication Ceo Senes 5 V DC type PLC Three methods are available to switch the screen Switching by the instruction from PLC The screens can be switched by writing to the basic communication area from the PLC ladder program Switching with the touch sc
41. ctiautomation net Email info ctiautomation net Record of changes Manual No Date Desceiption of changes ARCT1F511E Jul 2010 First edition ARCT1F511E 1 Dec 2010 Second edition ARCT1F511E 2 Apr 2011 Third edition ARCT1F511E 3 Aug 2011 Forth edition Added new model GT32 E Error correction ARCT1F511E 4 Dec 2011 Fifth edition Added vertical type display function GT05 GT32 GT32 E Added device change function Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net
42. damage is assumed by mishandling of the product To prevent excessive exothermic heat or smoke generation use this product at the values less than the maximum of the characteristics and performance that are assured in these specifications Do not dismantle or remodel the product It could cause excessive exothermic heat or smoke generation Do not touch the terminal while turning on electricity It could lead to an electric shock Use the external devices to function the emergency stop and interlock circuit Connect the wires or connectors securely The loose connection could cause excessive exothermic heat or smoke generation Do not allow foreign matters such as liquid flammable materials metals to go into the inside of the product It could cause excessive exothermic heat or smoke generation Do not undertake construction such as connection and disconnection while the power supply is on It could lead to an electric shock The control force of the touch switches should be less than the specification of the product Failure to do so could lead to a damage to the product or a personal injury These touch switches operate using analog resistance membrane Do not press more than one point on the screen at a time Doing so might operate a switch located in the middle of the points pressed if one exists and could lead to a damage to the facility or an accident Copyright Trademarks This manual and its contents are
43. describes the screen creation of GT series and the settings of various functions General purpose Serial Communication Manual ARCT1F356E It is required when communication is carried out with devices you developed such as a board and PC Connection with Other Companies PLCs Manual ARCT1F449E It is a manual describing the connection methods with PLCs manufactured by other companies The connection methods with Panasonic PLCs are described in this manual Installation Guide ARCT1F513E It is a manual describing how to install GTWIN It supplied with the GTWIN software product ix Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Available Functions and GT Versions We recommend to keep GT series products up to date for use as usable functions will increase according to the upgrade The latest version of GT can be installed by the tool The upgrade of GTWIN is also necessary according to the upgrade of GT Version of GT01 and available functions Function GT01 GTWIN Parts Switch 1 00 or later 2 30 or later library Lamp 1 00 or later 2 30 or later Message 1 00 or later 2 30 or later Data 1 00 or later 2 30 or later Bar graph 1 00 or later 2 30 or later Clock 1 00 or later 2 30 or later Line graph 1 00 or later 2 30 or later History Not available Not available Alarm z F List
44. due to the excessive load or shock caused when being operated with any tools the touch switch should be operated within the specified control force Also if the touch swich is pressed like kneading the electrode may be worn out exceptionally and cause the malfunction Operate with a single touch of the switch The touch position may shift due to aging variation If the touch position has shifted please adjust it LCD panel Do not drop or have a strong impact on the programmable display unit as glass is used for the LCD panel The liquid in the LCD panel is a hazardous substance If the LCD panel is broken do not put the leaked crystalline liquid into your mouse Should it get into your mouse immediately gargle and consult a doctor If it adheres to your skin or clothes wash it away with soap There is a case that shadows appear in the place on the screen of the GT where no graphic or part is arranged The shadows appear as the extension of the characters graphics or parts actually being displayed This is a phenomenon resulting from the basic characteristics of liquid crystal devices and called cross talk Exposing the product to direct sunlight increases the surface temperature of the display higher than ambient temperature and causes deterioration of LDC panel Screen the product from the sun 3 3 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 2 Restriction Ac
45. ew tem i O Specifications Communication standard Conforms to RS232C Non insulation type E Baud rate bit s 9600 19200 115200 230400 bps onamons tor f Data length bit 8 communications p Parity None Odd Even with GTWIN Stop bit bit 1 Protocol GT dedicated protocol Note1 The baud rate of 230400 bps is available when the USB RS232C conversion cable is used Note2 When the baud rate is set to 230400 bps the connection using the GTWIN automatic communication setting function is not possible Set the GTWIN communication setting to 230400 bps and then transfer data Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 8 GT32 6 8 1 General Specifications GT32 Rated voltage Operating voltage range Power consumption Insulation method of power supply part Ambient temperature Ambient humidity Storage temperature Storage humidity Breakdown voltage Insulation resistance Note2 Vibration resistance Shock resistance EC Directive applicable Noise immunity Protective construction Weight Note1 When it is installed in a horizontal orientation installed to make the liquid crystal face be topside the usable range is 0 to 40 C Note2 Not isolated between the USB port COM port Ethernet port GT32T1 only and the internal digital circuit Note3 When using our exclusive cable Note4 When reattaching r
46. exceptionally and cause the malfunction Operate with a single touch of the switch The touch position may shift due to aging variation If the touch position has shifted please adjust it LCD panel Do not drop or have a strong impact on the programmable display unit as glass is used for the LCD panel The liquid in the LCD panel is a hazardous substance If the LCD panel is broken do not put the leaked crystalline liquid into your mouth Should it get into your mouth immediately gargle and consult a doctor If it adheres to your skin or clothes wash it away with soap There is a case that shadows appear in the place on the screen of the GT where no graphic or part is arranged The shadows appear as the extension of the characters graphics or parts actually being displayed This is a phenomenon resulting from the basic characteristics of liquid crystal devices and called cross talk Battery Do not leave the battery in the unit when it is not used There is a possibility of leak if it is left being discharged viii Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Manuals to be Used The manuals to be used for GT series are common to all the models GT series User s Manual ARCT1F511E It is this manual This manual describes the characteristics specifications installation and connections of each GT models GT series Reference Manual ACGM0357V EN This manual
47. longer than 10 m 5 V DC type only Protocol Interface for transferring screen data TOOL port O i oem Specifications O Conforms to RS232C Non insulation type Baud rate bit s 9600 19200 115200 230400 bps 2 it s Conditions for Data length bit it communications with GTWIN Note1 The baud rate of 230400 bps is available when the USB RS232C conversion cable is used Note2 When the baud rate is set to 230400 bps the connection using the GTWIN automatic communication setting function is not possible Set the GTWIN communication setting to 230400 bps and then transfer data 8 None Odd Even 1 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 2 GT02 6 2 1 General Specifications GT02 Specifications 24 V DC type 5V DC Rated voltage 24 V DC 5 VDC Operating voltage range 21 6 to 26 4 V DC 4 5 to 5 5 V DC Between power supply terminals and case 500 V AC for 1 minute Cutoff current 10mA at default setting Between power supply terminals and case Insulation resistance 100 MQ or more 500 V DC measured with megohmmeter at default setting 1000 V P P or more Pulse width 50 ns 14s between power supply terminals based on in house measurements IP67 Initial value evaluated by us Protective construction Dustproof and drip proof from front panel only packing used on panel 5 t
48. monitored through the GT series Screen creation tool GTWIN l FP series programming tool Personal computer For USB port Ethernet port models Personal computer Screen creation tool GTWIN FP series programming tool FPWIN GR The FPWIN or other software can be booted on the computer being used to edit GT series screens and PLC USB cable or Screen data programs edited and monitored through LAN cable being sent the GT series GT32T1 and received only FP series PLC PLC debugging Cable connected to the TOOL port New functions can be available by upgrading the GT The GT can be easily upgraded by donwloading the latest firmware from our website or using the GT Ver_UP tool Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Security Function Password protection function A password max 8 characters is specified for trasferring the screen data to GT from GTWIN This function prevents the outflow of screen data if anyone except the administrator tries to read out the screen data Operation security function GT02 GTO2L GT05 GT12 GT32 GT32 E This function is used to limit the contents of displays and operations by setting the security level of users for each part The level of operators are managed with the security password GT link function GT02 GT02L GT05 GT12 GT32 GT32 E This function is used to connect multiple GT units up to 32
49. net 3 6 Options 3 6 1 Backup Battery Backup battery The internal data in the GT can be backed up using the backup battery Use the following backup batteries GT model Baitery type Product No GT11 GT21 Button type lithium battery CR2032 commercial item GT02M2 GT02G2 GT05 GT12 GT32 GT32 E Backup battery AFPX BATT The backup battery for the FP X is used Battery life Battery life when operating at a normal temperature 25 C a normal humidity 65 RH and a voltage of 24 V DC is as follows GT model life GT11 GT21 GT05S GT32T GT32 E Approx 2 years Approx 3 years GT02M2 GT02G2 GT05M GT05G GT12 GT32M Approx 5 years Backup The internal data of the GT is backed up in the following ways Internal data to be backed up Stored in Backup battery Screen data base keyboard login Flow display data Recipe data Write device FP monitor screen data Stored in the F ROM Not required Alarm history Line graph sampling Logging data of Logging function Hold GT device Hold PLC device Stored in the SRAM Required IES Note When using a backup battery attach the battery before the power supply is turned on 3 19 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 6 2 How to Insta
50. off timer setting Date time display is incorrect when using the GT s internal clock Date time display is incorrect when using the PLC s internal calender timer 1 The GT s internal clock used as a reference is incorrect 1 Adjust the clock from the system menu 2 No battery has been inserted 2 Purchase a battery and install it 3 The battery has run down 1 The PLC s internal calendar timer used as a reference is incorrect 3 Replace the battery 1 Adjust by rewriting the value in the PLC s internal calendar timer Hold PLC Device data content isn t saved 1 No battery has been inserted 1 Purchase a battery and install it 2 The battery has run down 2 Replace the battery Date time 1 The PLC s internal calendar timer 1 Adjust by rewriting the value in the PLC s internal display is used as a reference is incorrect calendar timer incorrect Touch panel 1 Valid conditions have been set for 1 Check that the device status conditions on the PLC doesn t work the switch part but those conditions have not been met side are valid No operating sounds are heard when the touch panel is 1 The Switch Sounds setting under Options in the switch part attributes is set to Disabled 1 Change the setting to Enabled 2 The Touch Sounds setting under 2 Change the setting to Enabled pressed Setu
51. or later 1 00 or later 2 C0 or later Display panel sideways setting 1 10 or later 1 10 or later 2 C1 or later Copy Cable between GTs Not available Not available Not available 1 00 or later 1 00 or later 1 00 or later 2 C0 or later GT link 1 00 or later 1 00 or later 2 C0 or later PLC multiple connection 1 00 or later 1 00 or later 2 C0 or later xviii Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Change history GTWIN GT series version Additional functions version Ver 2 80 GT32 Ver 1 00 New model New release Equipped a SD memory card slot Sound function Ver 2 90 GT05 Ver 1 00 New model New release Ver 2 94 GT05 Ver 1 10 Operation security function GT32 Ver 1 20 GT link function Ver 2 96 GT01 Ver 1 35 Touch sound disable flag in Basic communication area GT05 Ver 1 20 Bit area GT11 Ver 1 25 GT21 Ver 1 15 GT32 Ver 1 30 Ver 2 97 GT05 Ver 1 30 New model GT12 Ver 1 00 Mult Function function New release PLC multiple connection GT32 Ver 1 40 Display Hide of data parts Modbus slave function GTOT Ver 1 35 U Modbus slave function Y GT11 Ver 1 25 GT21 Ver 1 15 Ver 2 98 GTO5 Ver 1 40 Logging function GT12 Ver 1 10 Index modifier of data parts GT32 Ver 1 50 Display Hide of switch parts Display of data parts in kana and Chinese character kana input of keyboard parts U
52. serial PANASONIC dedicated catia Other companies PLC protocols For the details refer to the latest GTWIN HELP Note It is internally isolated from the input power supply side between 24V and OV Note2 The and terminals are the power supply terminals for driving the main unit Note3 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Interface for transferring screen data USB port item ___ O Specifications Communication standard USB1 1 Connector shape TYPE B Trasmission distance Max 5m No of connected unit with PC 1 unit Note1 Take care of handling of the connector not to add an excessive static electricy on the metal part of the connector Note2 Screens can be transferred in one third less time via the Ethernet port The speed varies depending on screen contents Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Ethernet port GT32T1 only Communication standard Connector shape Transmission distance Applicable cable UTP cable Unshielded wire Category 5 Auto MDI X Supported Light on During 100OBASE TX communication Seon Blinking During 1OBASE TX communication Light on When linked PNR ACT Me Blinking During data reception Note1 Data processing in the main unit is carried out with the serial communication
53. time can be specified using the SYS1 instruction 2 Time taken until the GT sends a next command after receiving a response If a command is sent to quickly the connected device may not be able to receive it The time can be specified in the delay time setting for transmission in the communication parameter of the GTWIN configuration setting Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 5 Connection With a PLC 4 5 1 Automatic Communication Settings Function After turning on the power supply if there is not response from the PLC connected to the GT the GT switches to the automatic setting mode for the communication conditions In the automatic setting mode commands are sent to the PLC while changing the communication conditions in the sequence shown below If there is no response from the PLC commands are sent to the PLC while changing the communication conditions 9600 bps 8 bits odd parity 1 stop bit 19200 bps 8 bits odd parity 1 stop bit 115200 bps 8 bits odd parity 1 stop bit Communication conditions set in GTWIN Configuration settings The GT in automatic setting mode continues to repeat steps to until there is a response from the PLC While it is repeating there steps it is in the Standby mode under Configuration gt Communication Parameters Handle Communication Error on GTWIN fo
54. units to a single PLC Panasonic FP series RS485 communication is used Note Station numbers should be set to the connected GT units The both settings for GT and PLC are necessary PLC lt S GT station No 1 No 0 Hi J GT station RS485 communicaiton A maximum of 32 units can be connected It is communicated using token passing method PLC Multiple Connection GT02 GT02L GT05 GT12 GT32 GT32 E This is a function that enables multiple Panasonic PLCs FP series up to 31 units to be connected with one GT Communication is performed via RS485 FP2 FP2SH FPX FP2 MCU FPX FP X FPG COM3 FP2 CB485 FPG COM4 AFPX COM3 GT32 GT05 GT12 i pi RS485 communicatrion Amaximum of 31 units can be connected Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Logging function Model equipped with SD memory card slot It is a function to collect and log arbitrary device values into a PLC at a constant period or when conditions are met Logged data is saved in a SD memory card inserted in this unit in CSV format This function is useful for obtaining the history of data Connected device PLC etc Record area for logging FP monitor function GT02 GTO2L GT05 GT12 GT32 GT32 E This function is used to monitor or change the settings and data of FP series PLC on the GT screen Without creating screens in
55. version Ver Usable SD memory card d logo GT02M2 name z i onGT GT02G2 GT05 GT12 GT32 GT32 E Card type Capacity 1 00 or 1 39 or 1 09 or 1 49 or 1 00 or Sp menoiy ead 32M to later older older older later M 1GB 32M to SD memory card E 2GB gt D 1 00 or 1 40 1 10 or 1 50 or 1 00 or SDHC SD later or later later later later card Memory 4GB to e CLASS2 4 166B y 1 00 or 1 39 or 1 09 or 1 49 or 1 00 or SD memory card 32M to later older older older later y 1GB S 32M to SD d 1 00 or 4 40 or 1 10 or 1 50 or 1 00 or MEMO CAR 3GB later later later later later SDHC memory 4GB to card 32GB Note Select the capacity of a SD memory card according to the logo printed on the GT and the version of GT firmware Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 1 3 Screen Creation Tool 1 3 1 Tools Required for Screen Creation 1 Tool software It can be used for all the models in the GT series 2 Screen transfer cable Cable for connecting a PC For GT01 GT11 and GT21 A cable between a PC D sub 9 pin and GT TOOL port is available For GT02 GT02L GT05 GT12 GT32 and GT32 E Prepare a commercal USB cable or LAN cable for GT32T1 only GT Configuration file being transferred gt GT main unit Screen transfer cable GTWIN Install 3 warn 1 Tool software Personal
56. 000 0001 0001 12 000C 00000000 00001100 0000 0000 0001 0010 13 000D 00000000 00001101 0000 0000 0001 0011 14 000E 00000000 00001110 0000 0000 0001 0100 15 000F 00000000 00001111 0000 0000 0001 0101 16 0010 00000000 00010000 0000 0000 0001 0110 17 0011 00000000 00010001 0000 0000 0001 0111 18 0012 00000000 00010010 0000 0000 0001 1000 19 0013 00000000 00010011 0000 0000 0001 1001 20 0014 00000000 00010100 0000 0000 0010 0000 21 0015 00000000 00010101 0000 0000 0010 0001 22 0016 00000000 00010110 0000 0000 0010 0010 23 0017 00000000 00010111 0000 0000 0010 0011 24 0018 00000000 00011000 0000 0000 0010 0100 25 0019 00000000 00011001 0000 0000 0010 0101 26 001A 00000000 00011010 0000 0000 0010 0110 27 001B 00000000 00011011 0000 0000 0010 0111 28 001C 00000000 00011100 0000 0000 0010 1000 29 001D 00000000 00011101 0000 0000 0010 1001 30 001E 00000000 00011110 0000 0000 0011 0000 31 001F 00000000 00011111 0000 0000 0011 0001 63 003F 00000000 00111111 0000 0000 0110 0011 255 OOFF 00000000 11111111 0000 0010 0101 0101 9999 270F 00100111 00001111 1001 1001 1001 1001 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 5 ASCII Code Table Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Phone 800 894 0412 Fax 888 723 4773 Web www
57. 05S GT32T0 GT32T 1 GT32T E 4096 colors Monochrome 8 gradation GT12 16 gradation GT32M E display function is available The monochrome 8 gradation and 16 gradation displays can be selected as well as the existing monochrome 2 gradation display so that the screen can be displayed finely Easily shows a current state changing the backlight on the monochrome type For the monochrome type 3 color LED backlight type changing in the backlight color makes it easy to grasp a current state at a glance Green orange red type and White red pink type is available for the 3 color LED backlight type Example of use When an alarm occurs In normal state Orange Green rca When an emegency stop occurs Analog touch panel provided As an analog touch panel is provided it allows maximum flexibility in the switch layout and size Screens can be created easily using a special screen creation tool Terminal GTWIN Screen contents can be easily created using the dedicated Terminal GTWIN tool Screens are put together simply by selecting parts from libraries and positioning them in place Various parts for numerous applications are provided such as 256 color 3D parts Screen data of the other models can be used with the model conversion function Screen data can be converted from the low resolution model to high resolution model e g from GT01 to GT11 from GT21 to GT32 The communication methods support RS232C RS422 RS485 The
58. 1000 V P P or more Pulse width 50 ns 1us between power supply terminals based on in house measurements poet IP65 Initial value evaluated by us Dustproof and drip proof from front panel only packing used on panel contact surface Approx 230 g 2 4 W or less 100 mA or less Note1 Not isolated between the USB port COM port and the internal digital circuit Note2 When using our exclusive cable Note3 When reattaching replace waterproof packing Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 4 2 Performance Specifications GT05 Item Specifications GT05S GTO5M GT05G Display device 4096 color STN color LCD STN monochrome LCD Resolution 320 W x 240 H dots Displayable area 71 02 W x 53 26 H mm Backlight 3 color LED 3 color LED Display 1 color LED backlight white bakclight backlight green white pink red orange red Backlight brightness can be adjusted on the menu screen or GTWIN Backlight gt brightness configuration settings Ah l l l There are some minor variations in the backlight brightness Contrast Contrast can be adjusted on the menu screen Touch switch Analog touch switch resistive film type Touch Touch switch 0 8 N or less switches operation Life 1 million times or more at 25 C Screen data b ase keyboard Screen data base keyboard log
59. 2 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 3 8 When Performing General purpose Serial Communication For GT01 GT11 and GT21 Error code Error name Measures EROO BOC enor The value of BCC may be incorrect Check if there is no calculation mistake ERO1 Format error A command format may be incorrect Check if it is correct A command used is not supported with the version of the ERO2 NOT supported error GT Upgrade the version of the GT or use another command ERO3 Ad resserror The address specified does not exist in the GT Check the address of the transmitted command F The sent command exceeds the receivable number of EROS Receive buffer overflow bytes Check the number of bytes of the sent command ER05 Reduested overfiow The sent readout command exceeds the number of bytes q that can send back Check the number of the read words The communication condition for the GT may be ERO6 Data error unmatched with the condition for a destination device Check the communication conditions ER07 Data write inhibit error A command for the address that writingn is not available was sent Check the address of the sent command For GT02 GTO 2 GT05 GT12 GT32 and GT32 E Error code Error name Measures 0000 BCC error The value of BCC may be incorrect Check if there is no calculation mistake 0001 Format error A command format may be incorr
60. 2 RS485 type Communication standard Conforms to RS232C Non insulation type Conforms to RS422 Non insulation type Communication Baud rate bit s 9600 19200 38400 57600 115200 bps condition with Data length bit 7 8 external Parity None Odd Even devices Stop bit bit 1 Transmission distance Total length Max 15m Baud rate 19200 bit s Max 500 m Baud rate 115200 bit s Terminal resistance value 120 Q Protocol MEWTOCOL Protocol for PANASONIC PLC FP series General purpose serial PANASONIC dedicated protocol Protocol for other companies PLCs For the details refer to the latest GTWIN HELP Connector Connector terminal base 8 pin Note 2 3 Note1 It is internally isolated from the input power supply side between 24V and OV Note2 The and terminals are the power supply terminals for driving the main unit Note3 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Interface for transferring screen data Specifications TOOL port Communication standard USB1 1 Connector shape USB MiniB type 5pin Male Trasmission distance Max 5m No of connected unit with PC 1 unit Note1 Take care of handling of the connector not to add an excessive static electricy on the me
61. 22 Connection 4 3 1 Difference of Terminal blocks Between GT Models Although the terminal blocks vary between the 5 V DC type and 24 V DC type the connection method is the same The connection diagram is described with the terminal block for 24 V DC 24 V DC type 5 V DC type GT01 5 V DC type GT02 GTO2L GT side 24V DC RS422 485 GT side 5V DC RS422 485 GT side 5V DC RS422 485 Pin name Signal Pin name Signal Pin name Signal Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 3 2 RS422 Connection with FP X COM Port Olla cake QOQAQQQAS BES GOSSO99OaE To 24 V power supply GT series Usable models Programmable display PLC PLC communication cable FP X AFPX COM3 Loose wire cable ou DE RS422 RS485 type 24V DC yP Connecting to the FP X Communicatoin cassette 1 channel type RS485 RS422 GT side 24V DC RS422 485 Pin name Signal AFPX COM3 A Z Q COM3 0 RS485 RS422 RS485 422 s S A A To power supply PLC side Terminal block He Pin name Signal D SD SD RD RD Not used Rear switch of cassette Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 3 3 RS422 Connection with FP2 FP2SH COM Port Connecting to the C
62. 2C or RS422 for connecting to a PLC host PC or microcomputer board and a power supply terminal for operation 3 Waterproof packing This assures that the front panel is waterproof 2 7 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 2 Terminal Layouts of COM Port 2 2 1 GT01 5 V RS232C type Pin name Name Signal direction Product No 5 V E y n OV AIGT0030B1 sp 78 NC Not connected AIGT0030H1 o S SD Send data GT gt External device AIGT0130B1 NC RD Receive data GT lt External device AIGT0130H1 os NC Not connected i AIGT0230B1 NC Not connected AIGT0230H1 SG Signal ground Note There is no RS and CS control lines 5 V RS422 RS485 type Pin name Name Signal direction Product No li 5V 5 OV AIGT0032B1 a NC Not connected AIGT0032H1 3 SD Send data GT External device AIGT0132B1 SD Send data GT External device _ AIGT0132H1 z RD Receive data GT lt External device AIGT0232B1 RD Receive data GT lt External device AIGT0232H1 E Terminal resistance MB Note There is no RS and CS control lines 24 V RS232C type Pin name Name Signal direction Product No li i 24 V gt OV AIGT0030B s FG Functional ground AIGT0030H 3 SD Send da
63. 3 Check the device content specified on the PLC side in the first word of the basic communication area Do not use the basic communication area with ladder programs Screen doesn t switch 1 No screen number has been written to the screen setting area the first word in the basic communication area word device from the PLC 1 Specify correct screen number 2 The screen number to which you are attempting to switch has already been written from the PLC to the screen setting area the first word in the basic communication area word device 2 Refer to Reference Manual Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Problem Cause Solution Screen is dim 1 The power voltage may be low 1 Check the capacity of the power supply unit if it is enough for the GT s power consumption 2 The contrast is set too low 2 Bring up the system menu and adjust the contrast 3 The backlight is off due to the Backlight Auto off setting in the Setup of the GT configuration settings in GTWIN 3 Touching any area of the screen lights that area If a switch part is set on the touched area the area will not light even if touched To change the setting change the content of the backlight auto off settings Backlight goes off too quickly 1 The backlight auto off timer setting is too short 1 Change the backlight auto
64. 5 V DC Operating voltage l i 6 to 26 4 V DC 4 5 to5 5V DC range 1W or less 1 1 W or less Power consumption 2 W or less 80 mA or less 200 mA or less 220 mA or less Note1 Note1 0 to 50 C 20 to 85 RH at 25 C non condensing 20 to 60 C 10 to 85 RH at 25 C non condensing Breakdownivoltage Between power supply terminals and case 9 500 V AC for 1 minute Cutoff current 10mA at default setting ins lation resi t ce Between power supply terminals and case 100 MQ or more 500 V DC measured with megohmmeter at default setting Shock resistance 98 m s or more 4 times on 3 axes EMC Directiy EMC Directive EN61000 6 2 EN61000 6 4 Not applicable applicable F 1000 V P P or more Pulse width 50 ns 1us between power supply terminals Noise immunity Note2 based on in house measurements IP65 Initial value evaluated by us Dustproof and drip proof from front panel only packing used on panel contact Vibration resistance 10 t0 55 Hz 1 minute cycle Amplitude 0 75 mm 10 min on 3 axes Protective construction Note3 surface Note1 When supplying the power from the TOOL port of a PLC CPU unit comfirm the PLC restrictions such as the power supply capacity before use Note2 When using our exclusive cable 24 V DC and the ferrite core attached to the cable 5 V DC Note3 When reattaching replace waterproof packing Phone 800 894 0412 Fax 888 723 4773 Web www ct
65. 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Chapter 5 Troubleshooting Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 1 What to DO If Something Unusual Occurs GT01 GT11 GT21 the top right of the Problem Cause Solution Screen is 1 Power is not on 1 Supply the power supply to unit as per blank specifications 2 When only lamp and message parts are 2 Check the address of the substitute reference configured to the base screen Value of device and the device values on the PLC side substitute reference device value does not exist in substitute data Error code An error has occurred in communication Refer to lt 5 3 Troubleshooting Error Codes gt ER between the GT and an external device e g appears at PLC Screen data exists screen Screen There is no base screen data in the GT Transfer base screen data displays No Appears even when GT configuration data in the first word of the basic communication area word device Screen 1 Screen settings from the PLC the GT s 1 Create and register screen content or specify the displays switch part or the auto paging indicate an correct screen number Screen No unregistered screen number Error 2 When bringing up the keyboard screen 2 Create and register keyboard screen or specify during data input an unregist
66. D Send data GT External device AIGO5GQ03D lium coe RD Receive data GT lt Extemal device AIGO5SQ02D C2 Saou RS Request to send GT External device AIGO5SQ03D t Ao oo 0 CS Clear to send GT lt External device AIG32MQ02D WOUCOOO DO AIG32MQ03D gt AIG32TQ02D AIG32TQ03D SG Signal ground AIG32TQ12D AIG32TQ13D AIG32MQ03DE AIG32TQ03DE 24 V RS422 RS485 type Pin name Name Signal direction Product No 24 V AIGO5MQ04D OV AIGO5MQ05D FG Functional ground AIG05GQ04D SD Send data GT External device AIGO5GQ05D levee eee SD Send data GT External device AIGO5SQ04D Seoge RD Receive data GT lt External device AIGO5SQ05D oe a a it cia 3 f w RD Receive data GT lt External device AIG32MQ04D mM AIG32MQ05D l AIG32TQ04D f AIG32TQ05D E Terminal AIG32TQ14D resistance AIG32TQ15D AIG32MQ05DE AIG32TQO5DE Lo a Note There is no RS and CS control lines Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 3 Connecting to Screen Creation Tool GTWIN 2 3 1 TOOL Port 4 2 Pin No Name Abbre Signal direction Nos 1 Signal ground SG oy 2 Send data SD GT External device 3 Receive data RD GT lt External device 5 3 4 Not connected N C 5 5 V 5V LOS Note e The 5V of Pin 5 is reserved for the FP Programmer II It should not be used for any other application If using it there is a restric
67. GT01 and GT11 Installation Method Secure the GT to the installation panel using the four fittings and four screws provided with the unit 1 Place the GT in the installation panel 2 Insert the fittings into the grooves provided in the GT and tighten the screws to secure the GT to the installation panel 5 QQ Enlarged view The screw tightening torque should be 0 1 to 0 25 N m and tighten them uniformly Tightening the scews too hard can cause deformation of the front panel so that the touch switches will not function properly Install the GT within the above range 3 1 7 GT21 Installation Method Secure the GT21 to the installation panel using the two fittings and four screws provided with the unit 1 Place the GT21 main unit in the installation panel 2 Insert the fittings into the grooves provided in the GT21 main unit and tighten the screws to secure the GT21 main unit to the installation panel aren Installation panel 8 N larane The screw tightening torque should be 0 1 to 0 25 N m and tighten them uniformly Tightening the scews too hard can cause deformation of the front panel so that the touch switches will not function properly Install the GT within the above range Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 8 GT05 GT32 GT32 E Installation Method Secure the GT32 to the installation panel us
68. Hold GT Device 2048 255 words Hold PLC Device 24 words Built in clock data Alarm history data Backup Line graph sampling data pay Internal device hold data Hold PLC Device data Life Approx 2 years at 25 C Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Note2 A battery is necessary for SRAM backup Note3 Please purchase a battery separately The battery life is the value when no power at all is supplied The actual lifetime may be shorter according to the condition of use Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 5 3 Function Specifications GT11 Item Specifications Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double or quadruple in height and width True Type GTWIN 10 to 96 dots Windows R 10 to 96 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of registerable screens 250 screens N 8 Registerable screen number Base screen No 0 to 3FF Keyboard screen No 0 to 7 Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function swi
69. Not available Not available Keyboard 1 00 or later 2 30 or later Custom 1 00 or later 2 30 or later Other Recipe Recipe 1 00 or later 2 30 or later functions SD recipe Not available Not available Flow display 1 00 or later 2 30 or later Write device 1 00 or later 2 30 or later Sound Not available Not available Password 1 00 or later 2 30 or later Password 3 F Operation security Not available Not available Multi language exchange 1 20 or later 2 50 or later Logging function Not available Not available Display panel sideways setting 1 10 or later 2 40 or later Copy Cable between GTs 1 30 or later SD memory card Not available Not available GT link Not available Not available PLC multiple connection Not available Not available Note1 Only referring to PLC can be set xX Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Version of GT02 and available functions Function GT02M2 GT02M0 GTWIN GT02G2 GT02M1 GT02G0 GT02G1 Parts Switch 1 00 or later 1 00 or later 2 A0 or later library Lamp 1 00 or later 1 00 or later 2 A0 or later Message 1 00 or later 1 00 or later 2 A0 or later Data 1 00 or later 1 00 or later 2 A0 or later Bar graph 1 00 or later 1 00 or later 2 A0 or later Clock 1 00 or later 1 00 or later 2 A0 or later Line graph 1 00 or later 1 00 or later 2 A0 or late
70. OM port To power supply AIP81842 GT series Usable models PLC PLC communication cable Programmable display FP2 Multi l Communication D SUB 9 pin 5V DC RS422 Communication block l ose wir cable AIP81842 24V DC RS485 type Unit FP2 CB422 yP Connecting to the FP2 Multi Communication Unit MCU Communication block RS422 PLC side TO PaWer GT side 24V DC RS422 485 O Pin No Signal Cable color Dot mark 1 NC Brown Black dot SD Brown Red dot RD Yellow Black dot SD Yellow Red dot RD Green Black dot 2 3 4 5 6 7 8 9 Oo ONO AUN oo0oo0o00 oo0oo0o0 7 Green Red dot Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 3 4 RS422 Connection with C NET Adapter To power supply C NET adapter AFP8536 AFP8532 GT series AFP15401 AFP15402 Usable models PLC PLC communication cable Programmable display AFP8536 AFP8532 5VDC FP series C NET adapter AFP15401 24V DC RS422 RS485 type AFP15402 Conneciton method C NET side To power GT side 24V DC RS422 485 supply ft O 1 ja 2 _ a Communication settings on the PLC side Specify the setting to match with the setting for the GT using the tool software at the PLC side C NET adapter setting Set the termination
71. Panasonic PROGRAMMABLE DISPLAY GT Series User s Manual ARCT1F511E 4 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents To ensure that you use this product correctly read this User s Manual thoroughly before use Make sure that you fully understand the product and information on safety This manual uses two safety flags to indicate different levels of danger WARNING If critical situations that could lead to user s death or serious injury is assumed by mishandling of the product Always take precautions to ensure the overall safety of your system so that the whole system remains safe in the event of failure of this product or other external factor DO NOT USE THE PROGRAMMABLE DISPLAY TO CONTROL SAFETY FEATURES OR OTHER CRITICAL OPERATIONS OF EQUIPMENT OR SYSTEMS A COMMUNICATION ERROR FOR ANY REASON MIGHT PREVENT SUCH SAFETY FEATURES OR CRITICAL OPERATIONS FROM FUNCTIONING PROPERLY Do not use this product in areas with inflammable gas It could lead to an explosion Exposing this product to excessive heat or open flames could cause damage to the lithium battery or other electronic parts Battery may explode if mistreated Do not recharge disassemble or dispose of fire CAUTION If critical situations that could lead to user s injury or only property
72. RS485 Silver AIGT0232H Pure black AlGO2MQ02D dto oe RS232C FSilver AIG02MQ03D CO RS422 Pure black AIGO2MQ04D USB ii it USBI 1 RS485 Silver AlGO2MQ05D p Pure black AIG0O2MQ12D compliant RS232C 7 Gioi 3gol r Silver AIG02MQ13D LED RS422 Pure black AIGO2MQ14D white RS485 Silver AIGO2MQ15D red pink 24V Pure black AlGO2MQ22D COM port DC RS232C Miler AIG02MQ23D USB port USB1 1 GT02M2 compliant Pure black AlGO2MQ24D RS422 STN with SD memory RS485 monochrom card slot Silver AIG02MQ25D Sie e roD Pure black AIG02GQ02D 240x90 RS232C FSilver AIG02GQ03D GT02G0 dots 5VDC EONA RS422 Pure black AIG02GQ04D po RS485 Silver AIGO2GQ05D USB port USB1 1 cariphanb Rgo300 pure black AlGO2GQ12D anne P 3 color Silver AIG02GQ13D LED RS422 Pure black AIG02GQ14D Fuk RS485 Silver AIG02GQ15D re 24V Pure black AIG02GQ22D COM port orange DC RS232C F Silver AIG02GQ23D USB port USB1 1 GT02G2 compliant Pure black AlGO2GQ24D RS422 with SD memory RS485 card slot Silver AIG02GQ25D Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net COM port commu Front ae Model Display a sre Backlight ae nication panel Model No P PPly specifi color cation
73. Repair Parts gt 2 COM port and power supply terminal This is a communication port RS232C or RS422 for connecting to a PLC host PC or microcomputer board and a power supply terminal for operation 3 TOOL port GTWIN connection port This port is used to connect the screen creation tool Operation mode setting switches Setting the operation mode setting switches as follows when turning on the power supply enables the setting to inhibit to move to the system menu or enables to clear F ROM Setting a Inhibit system menu shift Clear F ROM ON ON ON Switch setting nani OFF Bgt OFF Bajau OFF 1234 1234 1234 LOO a Note Do not use any settings other than the above settings Waterproof packing This assures that the front panel is waterproof Battery cover for GT11 and GT21 When using a backup battery to be separately purchased open this battery cover to install it The clock PLC device hold data alarm history and GT internal device hold data functions can be used with the backup battery gt a Reference lt 3 6 2 How to Install the Battery Lithium Button Battery gt Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 1 2 GT02 GT02L GT02M2 GT02G2 i GT02M0 GT02M1 GT02G0 GT02G1 i i 5 GT02L Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Emai
74. Setting Clear F ROM Mounting location of connector for battery COM port PLC external device connection port and power supply terminal This is a communication port RS232C or RS422 for connecting to a PLC host PC or microcomputer board and a power supply terminal for operation waterproof packing This assures that the front panel is waterproof Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 1 3 GT05 GT12 GT32 GT05 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Liquid crystal display panel touch panel Various screens are displayed here A touch panel is provided on the liquid crystal display panel and switches can be operated and data entered simply by touching the panel Optional protective sheets are also available to protect the touch panel and keep it clean A sheet is affixed to the touch panel to protect it from scratches when shipping Please remove it before using the GT sp memory card slot Except GT12M0 and GT12G0 A SD memory card is inserted in this slot Saving from GTWIN Operate on the GTWIN screen using a SD memory card read writer Savving from GT main unit Operate on the SD memory card setting screen under the system menu usB port This is a connector for connecting the screen creation tool The commercal USB cable can be used
75. Terminal block Terminal block ppc GT side 24V DC RS422 485 Cassette rear switch Cassette rear switch Not ON Not No2 Baud rate No 2 Baud rate GT Link Function PLC side GT side General unit Terminal block To power 24V DC RS422 485 supply GT side Terminal unit 24V DC RS422 485 Pinname Siana wv FG FG SD SD To power supply a i RD Cassette rear switch No 1 ON No 2 Baud rate i circuit IEF Note Check the usable GT models for 1 N communication Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 5 RS485 Connection with FP e COM Port Connecting to the COM port To power supply GT series Usable models PLC PLC communication cable Programmable display FP e RS485 type Loose wire cable av De RS422 RS485 type yp 24 V DC yp Connecting to the FP e RS485 1 1 communication FP e side ps lr GT side 24V DC RS 422 485 I t com B ss RS485 Z 7 Short circuit PLC multiple communication FP e side Terminal unit FP e side General unit To power GT side 24V DC RS422 485 i to COM gt RS485 a Short O circuit O Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 6 RS485Connection with FP2 FP2SH To power suppl
76. after turning on the power supply of GT The time varies according to conditions and the number of connected GT units As for the power supply of GT it is recommended to use the wiring that enables multiple GT units to be simultaneously turned on If the power supplies of multiple GT units cannot be simultaneously turned on after turning on the power supply of devices such as a PLC an error message will be displayed and it may take some time to make communication to be established The error display disappears when all the GT units become operable 4 2 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 1 3 Connecting to the PLCs made by Other Companies For information on the connection with PLCs manufactured by other companies see the latest GTWIN HELP or our website where you can get the manual Reference lt Connection with Other Companies PLCs Manual ARCT1F449E gt 4 1 4 Connecting to a Serial Device Devices other than PLCs can be connected by using the general purpose serial communication mode of the GT Also PLCs made by other companies which are not put on our website can be used See our website or the GT series General purpose serial communication manual gt a Reference lt GT Series General purpose Serial Communication Manual ARCT1F356E gt 4 1 5 Electric Supply from PLC 5 V DC type The power can be supplied to the 5V DC type with the communication ca
77. ation net 3 4 2 GTO2 GTO2L 5 V DC RS232C type Perform wiring and placement of the cable so that there is no impression of external noise on the cable and no induction Use shielded wires for distribution cables Recommended cable AIGT8142 It conforms to CE marking As conditions the following wiring is required 1 Perform grounding of the cable shield 2 Perform grounding of the GT RS422 RS485 type There is no RS and CS control lines Perform wiring and placement of the cable so that there is no impression of external noise on the cable and no induction Use shielded wires for distribution cables When using shielded cable with crossover wiring for the RS485 transmission line grounded one end E is used to set the terminating station It conforms to CE marking As conditions the following wiring is required 1 Perform grounding of the cable shield 2 Perform grounding of the GT 3 Key Point The CE marking standards that the GT02 GT02L conforms to European EMC directive 2004 108 EC European EMC standards EN61131 2 3 15 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 4 3 RS232C Communication There is no RS and CS control lines for GT01 Perform wiring and placement of the cable so that there is no impression of external noise on the cable and no induction Use shielded wires for distribution cables Rec
78. ble only The power supply is not required separately However it is available only when it is connected with the TOOL port Restriction on the capacity of the power supply depending on the PLC model to be used The number of PLC units that can be expanded is limited PLC model Restrictions when connecting a 5 V DC type FP X The number of units which can be expanded depends on the unit type FPO Maximum of two expansion units FP Maximum of six expansion units FP2 The method for calculating the number of units that can be expanded is provided in the manual Follow that formula and keep the GT01 s power FP2SH consumption not higher than 200 mA when calculating FP e FPOR There are no particular restrictions FX series made by The restrictions are equivalent to the restrictions on the programmable display Mitsubishi Electric F920 5 V power supply type made by Mitsubishi Co Use the FX series according to the use conditions for the F920 5 V power supply type Expansion is possible with the number of units given above regardless of the type of unit Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 2 RS232C Connection 4 2 1 Difference of Terminal blocks Between GT Models Although the terminal blocks vary according to the GT models the connection method is the same The connection diagram for 24 V DC is described with the termi
79. copyrighted You may not copy this manual in whole or part without written consent of Panasonic Electric Works SUNX Co Ltd Windows is a registered trademark of Microsoft Corporation in the United States and other countries Ethernet is a registered trademark of Fuji Xerox Co Ltd and Xerox Corp SDHC logo and SD logo are trademarks All other company names and product names are trademarks or registered trademarks of their respective owners POT_GT Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Table of Contents Before You Start Manual to be Used Available Functions and GT Versions Chapter 1 Features and FUunctions eeceeeeeeeseeeeeeeeeeeeeeeeeeeeeeeeeeenees 1 1 1 1 Features and Functions of GT Series cccccsccsseeesseeeeeeeeeseeeseseeeenseeeeeeeeeseesesneeeenseeenes 1 2 12 TYPOS O UNIS escciveces nc cectscees ede suereczetcenrececececcstbeneeecsdchsecdenceneecuseessesdbceveediucvedvdeneetevseceares 1 7 T2 AV GSES settee cteteee setae ee atiden elton hited a NN ia ee Leta en 1 7 1 2 2 Options and Repair Parts cccccccccceceeee e a Ta E 1 9 1 3 Screen Creation TOON ieiici cscteccscccedseceescts cae ecseteledsveecduvsueccuvexccdeuy renedues csuncedsevueces euvecdeuse 1 12 1 3 1 Tools Required for Screen Creation ccccccccceceeeeeneccaeeeeeeeeeseccaeaeeeeeeesesucaecaeeeeees 1 12 1 3 2 Software Usage Environment and Applicab
80. cording to Mounting Directions If the unit is being installed in a horizontal orientation or our Programmer II and C NET adaptor are being connected to the TOOL port note that the ambient usage temperature should be as below Model oe Ambient nae Condition jemperature Liquid display panel side Vertically installed Installation panel GT11 Programmger II ENET adapter 0 to 45 C Horizontally installed P R R Horizontal installation GT21 Programmer II C NET adapter GT32 Horizontally installed 0 to 40 C GT32 E Horizontally installed 20 to 55 C Note When installing the unit aslant the restriction is the same as the one when installing horizontally 3 1 3 Installation Space Applicable panel thickness A panel with a thickness of 1 0 to 5 0 mm should be used Clearance when the GT is installed When installing the GT unit if other parts are being installed to the panel or cables are being wired to it we recommend providing a clearance around the GT unit This prevents cables from being damaged and facilitates the installation work Also make sure that the slits in the main unit are never obstructed Clearance on the surface Clearance on the Model name Clearance to connect the screen mounting surface when transfer cable using a SD memory card GT01 GT11 20 mm GT21 GT02L 30 mm or more 60 mm GT02 50 mm or more GT05 recommended GT12 60 mm 40 mm
81. ction sinnene aeaee aieiaa eE erati m laee aani 4 2 41 2 GT Link GOMMECHOM reiia aeaaee satan aaee aTe A A ree 4 2 4 1 3 Connecting to the PLCs made by Other Companies cccceeseceseeeeeeeeeenteeeteeeaees 4 3 4 1 4 Connecting to a Serial DeVICE eee eect centr ee eeeeeeeeeeeeeeeeeeeeaeeeeseneaeeeeeeaeeeeeeaaees 4 3 4 1 5 Electric Supply from PLC 5 V DC type eeeeceeeeeeeeeeeeeeeeteeeeeeteeeeeeeseeaeeeeeneaees 4 3 4 2 RS232C Connection swcsecccvseatesscacscecareccceezecstgence ecucvectteteacatesedausdncdeazecsecabessecdiees cu suaseisuctueese 4 4 4 2 1 Difference of Terminal blocks Between GT Models c ecceceeeeeeeeeeceeeeeeeeeeteees 4 4 4 2 2 RS232C Connection with PLC Tool Port 0 ccccccccceeceeeeeeeeeeceeceeeeeeesecenaeeeeeeeeetees 4 5 4 2 3 RS232C Connection with FP X COM Poft cceceececcececeeeeeeecaeceeeeeeeseceecnieeeeeeeeeeees 4 7 4 2 4 RS232C Connection with FP2 COM Port ceeeceeceececeeeeeeeececeeeeeeeeeseeeeenieeeeeeeeteees 4 9 4 2 5 RS232C Connection with FPO FPOR COM Pott cceeeeeneeeeeeneeeeeeneeeeeeeneeeeeeaas 4 11 4 2 6 RS232C Connection with FP e COM Pott ccccceceeeeeeeeeeeeeeeeeeeseeetcaeeeeeeeeeteees 4 12 4 2 7 RS232C Connection with FP2 FP2SH COM Port cccecceceeeeeseeeeeeeeseeeesseeeseeees 4 13 4 3 R9422 CONNECTION sses a cece nsec tea n S aneia a aa e ea eaa a baaa reaa iaee aaia aiai 4 14 4 3 1 Difference of Terminal blocks Between GT Mod
82. d Note1 The manufacturer name that the operation check has done Panasonic Corporation Usable capacity of a SD memory card varies according to the version of GT firmware Note2 Please format with a format software for SD memory cards Note3 The SD access lamp turns on while acccessing the SD memory card Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 5 GT11 6 5 1 General Specifications GT11 tem Specifications O Rated voltage 24 V DC Operating voltage range 21 6 to 26 4 V DC Power consumption 2 4 W or less 100 mA or less Ambient temperature 0 to 50 C N Ambient humidity 20 to 85 RH at 25 C non condensing Storage temperature 20 to 60 C Storage humidity 10 to 85 RH at 25 C non condensing Between power supply terminals and case 500 V AC for 1 minute Cutoff current 10mA at default setting Between power supply terminals and case Insulation resistance 100 MQ or more 500 V DC measured with megohmmeter at default setting 10 to 55 Hz 1 minute cycle Vibration resistance Amplitude 0 75 mm 10 min on 3 axes 98 m s or more 4 times on 3 axes EC Directive applicable EMC Directive EN61000 6 2 EN61000 6 4 1000 V P P or more Pulse width 50 ns 1us between power supply terminals based on in house measurements Nee IP65 Initial value evaluated by us Protective construction Dustproof and drip proof from
83. d Select Tool port setting when connecting to the tool port or COM port setting when connecting to the COM port Please match the transfer format and transmission speed settings to those of the GT PLC Configuration Untitlel xi Hold Non hold1 Hold Non hold2 Action on Error Time Link High Speed Counter Interrupt Input Tool Port COM Port COM2 Port No 410 Unit No ae Cancel No 412 Modem Enabled Read PLC No 413 Communication Format No415 __Baudrate Char Bit fests gt fscoobps gt Initialize Parity Odd gt Hee stopBit 1 z In addition to the transfer format and transmission speed settings set the communication mode to Computer link when using the COM port PLC Configuration Untitle1 xj Hold Non hold1 Hold Non hold2 Action on Error Time Link High Speed Counter Interrupt Input Tool Port COMI Port COM2 Port Select Computer Link No 410 Unit No No 412 Comm Mode Cancel Read PLC No 413 Communication Format No 415 Baudrate initial Char Bit 8Bits Terminator EA z 3600 bps 7 anane Parity Odd Header STX not exist Y Help Computer Link dem Enabled _ p 0 32766 2048 0 2048 iaga Saiga etting for data r yanai Bufferc ils data communicat de Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Phone 800
84. due to noise etc Re supply power communication to the PLC and GT Overrun error The reception buffer in the GT is overflowing ER22 The GT cannot There could be an error in the PLC receive data Re supply power to the PLC and GT For GT02 GT02L GT05 GT12 GT32 and GT32 E Code No Content Cause and solution 1 The PLC connection cable is disconnected Check the connection cable to make sure it is connected 2 There is a temporary error due to noise etc Re supply power to the PLC and GT 0100 Keyboard screen data Check if the digit of the data parts on the keyboard screen has parts digit error been set correctly When updating the alarm history display is stopped alarm history data displayed on the GT s screen has been updated within the memory Once the stop of display update is cancelled new data is displayed The device that cannot be used is specified for the data Check OOFF Time up error 0101 Alarm history error 0500 Tool setting error if the used device is correct e g the word device is set in the bit area 1000 SD memory card not The SD memory card is not inserted to the SD memory card slot inserted properly Check the SD memory card slot 4001 SD memory card Data cannot be written to the SD memory card Check whether writing error the SD memory card is not write protected 5 10 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctia
85. eation is sent to the GT from the PLC using the power failure alarm signal that is input into the PLC as a trigger See figure below Occurrence of power outage SD memory card is damaged and data cannot be read because SD memory card was ejected during save SD memory card is damaged by power discontinuity due to power failure and data cannot be read Power supply backup Power outage detection signal ON Power supply Logging stops Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 3 Error Codes and How to Handle Them 5 3 1 About Error Codes When an error occurs in the GT series an error code displays at the top right of the screen There are two types of error codes GT series error codes and PLC error codes ER Error code display 5 3 2 GT Series Error Codes The following error codes are displayed when there is an error in the GT For GT01 GT11 and GT21 Code No Content Cause and solution 1 The PLC connection cable is disconnected Check the connection cable to make sure it is connected 2 There is a temporary error due to noise etc Re supply power Time up error ERFF No response from the das to the PLC and GT Data error 1 An error exists in the communication condition settings A data error occurred Check the PLC and GT baud rate and transfer format ER21 during 2 There is a temporary error
86. ect Check if it is correct A command used is not supported with the version of the 0002 NOT supported error GT Upgrade the version of the GT or use another command 0003 Address itor The address specified does not exist in the GT Check the address of the transmitted command 0004 Receive biter overflow The sent command exceeds the receivable number of bytes Check the number of bytes of the sent command 0005 Requested overflow The sent readout command exceeds the number of bytes that can send back Check the number of the read words The communication condition for the GT may be 0006 Data error unmatched with the condition for a destination device Check the communication conditions 0007 Data write inhibit error A command for the address that writingn is not available was sent Check the address of the sent command Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Chapter 6 Specifications Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 1 GT01 6 1 1 General Specifications AIGT0030B AIGT0030H AIGT0130B AIGT0130H AIGT0230B AIGT0230H Specifications AIGT0032B AIGT0032H AIGT0132B AIGT0132H AIGT0232B AIGT0232H AIGT0030B1 AIGT0030H1 AIGT0130B1 AIGT0130H1 AIGT0230B1 AIGT0230H1 AIGT0032B1 AIGT0032H1 AIGT0132B1 AIGT0132H1 AIGT0232B1 AIGT0232H1 Rated voltage 24 V DC
87. eeeeeeeeeeeneeeeeeeeeeeeeeeseeeeeeenenees 6 1 Re o een eR oS E E E oe 6 2 6 1 1 General Specifications cinin ieni ae ia i a a a aeta a 6 2 6 1 2 Performance Specifications GT01 ce eeecceeeeeeceeeeeeeeeeeeeeeeeeaeeeseeeaeeseenaeeeeeeeaeees 6 3 6 1 3 Function Specifications GT01 0 eeeceeceeeeeeeeeeeeeeeeeeeeeeeeeeeaeeeseeeaeeeseeeeeeeseeaeeeeeeaeees 6 4 6 1 4 Interface Specifications GT01 occ eeceeeeeeee eee eeneeeeeeeeeeeeeeeeaeeeteaeeeeteeaeeeeeeaeees 6 5 ZAE ARP E E sides feud feucens E Peceee pd acacuts E E S 6 6 6 2 1 General Specifications G T02 eers kerei sen riani ERN EERE ERR AEEA NEERA ERARE RA TERRI F AE EAAAEAEER 6 6 6 2 2 Performance Specifications GTO2 ecceeeeeeeeeceeeeeeeeeeeeeeeseeeeeeseeeaeeseeaeeeeeeeaeees 6 7 6 2 3 Function Specifications S T02 p irean EEan EE EARE EA KRAE EA REENER ERE ERR E ENAERE RA 6 8 6 2 4 Interface Specifications GT02 sssseesssreessrnnserreeensrnaetenasstennaainnndattndetenanestannaannnnnana 6 9 5 GTO aaa EE E PA E E E E E ated ae eS Danietees 6 10 6 3 1 General Specifications G T02L ecean a A EO 6 10 6 3 2 Performance Specifications GTO2L scesi aAa 6 11 6 3 3 Function Specifications G T02 erriren eaa EEA AEA REE 6 12 6 3 4 Interface Specifications GTO2L o oo ee ceeeeeeeeneeeee EAE aAA ERER EAN 6 13 Ci GTO i ea a aE eet EE AAEE EAn in cc enede dunes dite untewetuntecncveedet undead ASEA EOE TOE 6 14 6 4 1 General Specifications ccccccceceeecececeecceeeeee
88. eenaeeeenees 6 25 ETALE N a acl a Sm Sr OS an ee Bee ene Er Bea 6 26 6 7 1 General Specifications GT21 cece eeteee teenies erence ee teeeeeteeeeetiieeeeesneeeeneae 6 26 6 7 2 Performance Specifications GT21 cc ecceeeeecteeeeeetteeeeetieeeeetieeeeetieeeeseieeeeeeae 6 27 6 7 3 Function Specifications GT21 c cece eee eeneee ee eieeeeeeneeeee sees eeeieeeeseeeeeneae 6 28 6 7 4 Interface Specifications GT21 0 eect eee etnee erties ee eieeeeetieeeeeteeeessieeeene 6 29 ERE IRC P see ee ee er aE Ee E ee ener ee 6 30 6 8 1 General Specifications GT32 ec ceceetneee eee nese teneee ee tineeeeeseeeeeteeeettaeeeeeeae 6 30 6 8 2 Performance Specifications GT32 00 cece eee ee eeneeeeeteneeeee teaser tieeeerseeeeneae 6 31 6 8 3 Function Specifications T32 Jese riri ea aA E AAE EAA EE RATER 6 32 6 8 4 Interface Specifications GT32 sssssesssrsesssrrensrirnsninnnesninanstennsnnnnnnnnannaanannenananaaaa 6 33 6 8 5 Sound Output Specifications GT32T1 Onlly cc eeeeeeeeeeeeeee tennessee tteeeeeeneeeeeeee 6 34 6 9 GTS 2 E ip e anae r aaa aa a a aeaa aa aaa Aaa d gaai a Eae toed es sasvasecusadavenscdvvssdseduysecueay 6 35 6 9 1 General Specifications GT32 E Jerrie naira AE AERAN 6 35 6 9 2 Performance Specifications GT32 E essre irienna ienie aeeiiaii EEA 6 36 6 9 3 Function Specifications GT 32E rna a EEEa A ERRARE 6 37 6 9 4 Interface Specifications GT32 E seiseceesisirrisrririeririeeieeiiieriinisirrnneiiinsdrei
89. el was tried to be changed Your level cannot be changed If you wanto to change it change from the Operation security password edit on GTWIN Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net When using the SD memory card Data may be erased or the SD memory card may be damaged during the operation Take measures for the situations as below Problem Measures Transmitting GT configuration setting file using the logging function clears the information on the SRAM Data in SRAM Save all the data remained in the log before transmission Record area for When data cannot be saved in the SD memory card the data beginning with the logging is lost chronologically oldest data will be overwritten if the record area for logging is full Make the setting of the notice device for the case that the SD card free space is less than the specified size Stop the logging of data Eject the SD memory card after turning on the setting for stopping the trigger occurrence for all logging files in the record area control Activate the setting for stopping the trigger occurrence with switch parts etc Set not to save in the SD memory card Turn on the control device for stopping write to the SD memory card and then eject the card A UPS Uninterruptible power source is used When using a UPS the power is supplied to the PLC and GT both from the UPS and the signal for logging stop file cr
90. els cccceceeeeeeeeeneeeeeeesureeeeeaes 4 14 4 3 2 RS422 Connection with FP X COM Port ccccecceceeeeeeeeeeeneeeeeeeeeseeecaeeeeeeeeetnees 4 15 4 3 3 RS422 Connection with FP2 FP2SH COM Pot eee eeeeeeeeeeeneeeeeeeneeeeeeneeeeeeaas 4 16 4 3 4 RS422 Connection with C NET Adapter ccccceceeeeeeeeeceeeeeeeeeeeeeeaceeeeeeeeeteees 4 17 4 4 R9485 COMMECtION a r r a cece at shee canting st ara aaae aa sensed Ea aha aa Ee aupa Ea epa niia SN 4 18 ii Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 1 Difference of Terminal blocks Between GT Models ccccccccceccceeeccceeseeeeesaeeeeeenanees 4 18 4 4 2 RS485 Connection with FPOR COM Polt cccceceeseeeeeetceeeeeeeiieeeeetieeeertneeeeeee 4 19 4 4 3 RS485 Connection with FP X COM Poft ec cecneeeeeeeeeeeecneeeeetneeeeeeieeeeeeneeeneee 4 20 4 4 4 RS485 Connection with FP2 COM Pol t ececneceeeeneeeeeeeneeeeeenneeeeesieeeesiieeeereeae 4 23 4 4 5 RS485 Connection with FP e COM Port cece eter ee encneeeeeteneeeeeteeeeeeneeereae 4 25 4 4 6 RS485Connection with FP2 FP2SH c cece cence cece reer eeneeeeeeieeeeetineeeeeaeeeeteae 4 26 4 4 7 Precautions When Communicating With RS485 ceeeeeeeeeeeeeeetnteeeeeeneeeeeeee 4 27 4 5 Connection With amp PLC ecccssecesteesseecnseeeeneeeessaeseseeeensneeeeseeeeaeseeseeeenseaeseassesneeenseaeesnes 4 28 4 5 1 Automatic Communication
91. ensions 7 1 1 GT01 GTO1R Panel thickness 5mm Tu nri e Mounting panel 37 7 Display unit 72 Back view Unit mm Installation dimensions Panel cutout dimensions Cable 105 Applicable panel thickness 1 0 to 5 0 mm Unit mm Connector Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 2 GT02 Mounting panel GT02M0 Back view GT02M1 GT02G0 GT02G1 GT02M2 Back view GT02G2 Installation dimensions Panel cutout dimensions 105 1 Applicable panel thickness 1 0 to 5 0 mm i i CEEE NA a a a EY J Unit mm Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 3 GTO2L Mounting panel Back view Installation dimensions Panel cutout dimensions 105 1 Applicable panel thickness 1 0 to 5 0 mm 67 1 Unit mm Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 4 GT05 When installing connector Panel thickness 5 mm _ 54 2 Display _ 92 2 f 107 4 72 0 Display 110 0 Back view Unit mm Panel cutout dimensions 99 23 Applicable panel thickness 1 0 to 5 0 mm 40 _ 2 sp memory card
92. eplace waterproof packing GT3271 24 V DC 21 6 to 26 4 VDC 10 W or less 410 mA or less Transformer insulation 0 to 50 C 20 to 85 RH at 25 C non condensing 20 to 60 C 10 to 85 RH at 25 C non condensing Between power supply terminals and case 500 V AC for 1 minute Cutoff current 10mA at default setting Between power supply terminals and case 100 MQ or more 500 V DC measured with megohmmeter at default setting 10 to 55 Hz 1 minute cycle Amplitude 0 75 mm 10 min on 3 axes 98 m s 4 times on 3 axes EN61131 2 EMC Directive 1000 V P P or more Pulse width 50 ns 1us between power supply terminals based on in house measurements Notes IP65 Initial value evaluated by us Dustproof and drip proof from front panel only packing used on panel contact surface 4 Approx 500 g Approx 470 g Approx 480 g 12 W or less 500 mA or less Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 8 2 Performance Specifications GT32 Item Specifications GT32M GT32T0O GT32T1 Display device Blue white STN monochrome LCD 4096 color TFT color LCD Resolution 320 W x 240 H dots Displayable area 113 2 W x 86 4 H mm 110 8 W x 83 6 H mm Display Backlight CFL backlight LCD life 75000 hours at 25 C N 50000 hours at 25 C Contrast Can be adjusted on the menu None screen To
93. er PLC multiple connection 1 40 or later 1 40 or later 2 97 or later xvii Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Version of GT32 E and available functions Function GT32M E GT32T1 E GTWIN Parts Switch 1 00 or later 1 00 or later 2 C0 or later library Lamp 1 00 or later 1 00 or later 2 C0 or later Message 1 00 or later 1 00 or later 2 C0 or later Data 1 00 or later 1 00 or later 2 C0 or later Bar graph 1 00 or later 1 00 or later 2 C0 or later Clock 1 00 or later 1 00 or later 2 C0 or later Line graph 1 00 or later 1 00 or later 2 C0 or later Alam History 1 00 or later 1 00 or later 2 C0 or later List 1 00 or later 1 00 or later 2 C0 or later Keyboard 1 00 or later 1 00 or later 2 C0 or later Custom 1 00 or later 1 00 or later 2 C0 or later Other Recipe Recipe 1 00 or later 1 00 or later 2 C0 or later functions SD recipe 1 00 or later 1 60 or later 2 C0 or later Flow display 1 00 or later 1 00 or later 2 C0 or later Write device 1 00 or later 1 00 or later 2 C0 or later Sound Not available Not available Not available Password Password 1 00 or later 1 00 or later 2 C0 or later 1 00 or later 1 00 or later 1 20 or later 2 C0 or later Multi language exchange 1 00 or later 1 00 or later 2 C0 or later Logging function 1 00 or later 1 00 or later 2 C0 or later FP monitor function 1 00
94. ered the correct keyboard number keyboard screen number was specified 3 GT configuration data and keyboard 3 Transfer base screen data from GTWIN screen data exist in the GT but there is no base screen data Screen The total capacity of transferred base screen Delete part of the base screen data so that the displays data exceeds the 384 kbyte capacity of the capacity doesn t exceed the total capacity Memory is GT Data capacity can be checked by going to View Full V gt Memory Usage Conditions on GTWIN menu bar When the data capacity is not over the limit invalid data could possibly be remaining in the GT When transferring data do so after deleting the screen An 1 The screen specification in the PLC 1 Specify the correct screen number unspecified screen setting the GT switch part or the screen auto paging is wrong appeared th 2 The startup screen is specified in the GT 2 Check the start up screen setting for the GT ere is configuration settings GTWIN configuration settings in GTWIN Delete trouble when unnecessary settings and re transfer switching configuration data screens 3 An erroneous device or value is specified 3 Check the device content specified on the PLC side in the first word of the basic communication area Do not use the basic communication area with ladder programs Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net
95. eseeeneaeeeeeeeeeseaaeeeeeeeeeesesecsaeeeeeeeeeeeeees 6 14 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 4 2 Performance Specifications GTO5 c eee eeeeeeeeeeneeeeeteneeeeetieeeeetneeeeeseeeeteae 6 15 6 4 3 Function Specifications GTS eiesinnig eii eaa AT E AAAA TAEA 6 16 6 4 4 Interface Specifications GT05 essssssscieriricrireiisisireeirrneiernderinndetrnaaaitnnsdteinaerineeeei 6 17 TN Vea cea ceed ey cee cence eet ea alec cleaned aa e ea eeu acta dee ante etn wea 6 18 6 5 1 General Specifications GT11 ec eee eeteeeeeeenneeeee teaser tees eeseeeeesieeeeetieeeereae 6 18 6 5 2 Performance Specifications GT11 cceeeeeeeeeeeteeeeeetneeeeeeeneeeeeeeeeeetneeeeesieeeeneaa 6 19 6 5 3 Function Specifications GT 11 horetan aeea AERE A AERE eines A RAEES 6 20 6 5 4 Interface Specifications GT11 aesesessssessrsssssrrsesesrneerinnesrenaaatnnnsdnnnasanennasnnnaaantnnaana 6 21 G6 GN PAA e ene E ad aa cee Seat ctsce E A cuutetesseuetutedwatucesuceutucrdcudetes 6 22 6 6 1 General Specifications GT12 cece tener ee eeneeeeeetnneeeeeteeeeeteeeeeteeeeesneeeeeeae 6 22 6 6 2 Performance Specifications GT12 ec ecceeeeeteeeeeeeeieeeeeteneeeeeeieeeeesneeeeesneeeeeeae 6 23 6 6 3 Function Specifications GT12 cc ececeeteeeeee eens ee nne erana NaRa AARE RA PARRET ENEFA RRETA 6 24 6 6 4 Interface Specifications GT12 2 eee eee e eects erties ee tieeeee teaser tnieee
96. expansion slots used prepare an external 5 V DC power supply for the GT01 due to current consumption limits When using the FP2 FP2SH check whehter or not the power can be supplied from the TOOL port according to the calculation method of the number of expansion units described in the hardware manual Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Connecting with 24 V DC type AIGT8162 AIGT8165 AIGT8160 24V GT series 24 V DC type Usable models PLC PLC communication cable Programmable display FP X FPX ae F AIGT8162 FPO FPOR ee AIGT8165 24V DC RS232C type FP e AIGT8160 FP2 FP2SH Connecting to the TOOL port 24V power supply PLC side GT side 24V DC RS232C Cable color 24V oV FG FG SD SD RD RD RS NC cs NC SG SG Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 2 3 RS232C Connection with FP X COM Port Connecting to the COM port of FP X Communication cassette To 24 V power supply LOO QCOQAGES BEES SEEEEE EEE GT series Usable models PLC PLC communication cable Programmable display AFPX COM1 AFPX COM2 FP X AFPX COM3 AFPX COM4 AFPX COM5 Loose wire cable 5V DC 24V DC RS232C type Connecting to the 1 channel type RS232C
97. from front panel only packing used on panel contact surface Note1 When it is installed in a horizontal orientation installed to make the liquid crystal face be topside or when the FP programmer II or C NET adapter is connected to the TOOL port the usable range is 0 to 45 C Note2 When using our exclusive cable Note3 When reattaching replace waterproof packing Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 7 2 Performance Specifications GT21 Item Specifications Display device 256 color STN color LCD Resolution 320 W x 240 H dots Displayable area 98 0 W x 74 0 H mm Display Backlight 1 color LED backlight white Backlight brightness Can be set on the menu screen or GTWIN configuration settings There are some minor variations in the backlight brightness Contrast Can be adjusted on the menu screen or GTWIN configuration settings Touch switch Analog touch switch resistive film type Touch Touch switch 0 8 N or less switches operation Life 1 million times or more at 25 C F ROM Screen data base keyboard Flow display data 6656 kbytes Write device data 64 kbytes Memory Alarm history Line graph sampling 27 5 kbytes SRAM N Hold GT Device 2048 255 words Hold PLC Device 24 words Built in clock data Alarm history data Backup Line graph sampling data AE Internal device h
98. front panel only packing used on panel contact surface 4 Weight Note1 When connecting the FP programmer II to the TOOL port it is 150 mA or less Note2 When connecting the FP programmer II or C NET adapter to the TOOL port the usable range is 0 to 45 C Note3 When using our exclusive cable Note4 When reattaching replace waterproof packing Breakdown voltage Shock resistance Noise immunity Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 5 2 Performance Specifications GT11 Specifications Item AIGT2030B AIGT2030H AIGT2130B AIGT2130H AIGT2032B AIGT2032H AIGT2132B AIGT2132H Display device STN monochrome LCD Resolution 240 W x 96 H dots Displayable area 96 0 W x 35 4 H mm Display Backlight sede LED Dacklight 1 color LED backlight white green orange red Backlight Can be set on the menu screen or GTWIN configuration settings brightness There are some minor variations in the backlight brightness Contrast Can be adjusted on the menu screen or GTWIN configuration settings Touch switch Analog touch switch resistive film type Touch Touch switch 0 5 N or less switches operation Life 1 million times or more at 25 C Ne F ROM Screen data base keyboard Flow display data 1408 kbytes Write device data 64 kbytes Memory Alarm history Line graph sampling 27 5 kbytes SRAM N
99. g of the cable shield 3 Perform grounding of the GT GT01 GT02 GT12 GT11 70mm max k Power line Power supply line Communication cable Installing Ferrite core GT21 GT05 GT32 GT32 E Power line Shield The CE marking standards that the GT series conforms to European EMC directive 2004 108 EC European EMC standards For GT01 GT11 GT21 EN61000 6 4 and EN61000 6 2 For GT02 GT12 GT05 GT32 GT32 E EN61131 2 3 17 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 5 Precautions when Wiring Ethernet Port GT32T1 Although more than one GT32T1 can be connected using a hub communication is performed with one unit each Specify each destination to communicate Use a UTP cable unshielded cable for the Ethernet cable and take measures for noises such as installing a ferrite core if necessary It conforms to CE marking As conditions the following wiring is required 1 Do not use a shield wire for the Ethernet cable 2 Install a ferrite core to the Ethernet cable and make one turn Recommended ferrite core Kitagawa Industries SFC 10 or equivalent GT32T1 Ethernet cable Ferrite core 50 mm or less g Key Point The CE marking standards that the GT32 conforms to European EMC directive 2004 108 EC European EMC standards EN61131 2 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation
100. he value error setting range Check the setting value Connected GT The bit in the connected GT designation area corresponding to designation area error the station number of the connected GT is not on ihe The bit corresponding Check the connected GT designation area ao to the connected GT in the connected GT designation area 20FF Token error When the error code is indicated for a certain period of time after the power supply turned on There is a GT 1 The timings for turning on multiple GT units are different unresponsive to the Arrange the wiring that enables the power supplies to be token simultaneously turned on 2 The screen displays for all GT units have not completed The error code disappears when the screen displays for all GT units have completed 3 The settings for the startup screen display vary Make the same setting for all the connected GT units When the error code is always indicated 1 There is an unconnected or faulty GT Check if there is a GT indicating 20FF Reconnect the GT or turn off the bit in the connected GT designation area 2 The communication parameters are not specified correctly Check the baud rate and transmission format for the GT 3 The same station number is used for more than one GT units Check the station number setting of the connected GT units 4 Another GT is reading a SD card The indication disappears when reading the SD card has completed EQ00 User s memory error The memor
101. hen transferring data from GT to a personal computer This is displayed when data is being transferred from the GT to the computer Transferring GT__ gt PC When there is no base screen data This is displayed when there is no base screen data It is displayed even if the configuration data has been sent No Screen data When the specified screen does not exist This is displayed in cases such as when there is no data for a specified screen number LESC Screen No Error ESC button is displayed at the top right of the screen to return to the previous screen When the screen memory is full This is displayed if the internal user memory F ROM is full Memory is full Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 4 BIN HEX BCD Code Correspondence Table Decimal Hexadecimal Binary Binary Coded Decimal 0 0000 00000000 00000000 0000 0000 0000 0000 1 0001 00000000 00000001 0000 0000 0000 0001 2 0002 00000000 00000010 0000 0000 0000 0010 3 0003 00000000 00000011 0000 0000 0000 0011 4 0004 00000000 00000100 0000 0000 0000 0100 5 0005 00000000 00000101 0000 0000 0000 0101 6 0006 00000000 00000110 0000 0000 0000 0110 7 0007 00000000 00000111 0000 0000 0000 0111 8 0008 00000000 00001000 0000 0000 0000 1000 9 0009 00000000 00001001 0000 0000 0000 1001 10 000A 00000000 00001010 0000 0000 0001 0000 11 000B 00000000 00001011 0000 0
102. iautomation net Email info ctiautomation net 6 1 2 Performance Specifications GT01 Specifications AIGT0030B1 AIGT0030H1 AIGT0030B AIGT0030H AIGT0032B1 AIGT0032H1 AIGT0032B AIGT0032H AIGT0130B1 AIGT0130H1 AIGT0130B AIGT0130H AIGT0132B1 AIGT0132H1 AIGT0132B AIGT0132H AIGT0230B1 AIGT0230H1 AIGT0230B AIGT0230H AIGT0232B1 AIGT0232H1 AIGT0232B AIGT0232H Display Display device STN monochrome LCD Resolution 128 W x 64 H dots Displayable area 70 38 W x 35 18 H mm Backlight 3 color LED backlight 1 color LED backlight 3 color LED bakclight green orange red white white pink red Backlight brightness Backlight brightness can be adjusted on the menu screen or GTWIN configuration settings There are some minor variations in the backlight brightness Contrast Can be adjusted on the menu screen or GTWIN configuration settings Touch switches Touch switch Analog touch switch resistive film type Touch switch operation 0 5 N or less Life Note1 1 million times or more at 25 C Memory F ROM Note2 Screen data base keyboard Flow display data 384 kbytes Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 1 3 Funct
103. ication retries of the GT COM port B meaningn A gt B If the system is set up so that A B or A lt B the through function will not work properly When the baud rate of the GT TOOL port is 230400 bps the through function cannot be used Communicate at 115200 bps or lower for using the throught function e For the USB port type the OS installed in the connected computer must be Windows 2000 or later e Restrictions on COM port connections When connecting the GT01 to the COM port of a PLC a separate external supply must be provided e When using the FP programmer II An FP Programmer II cannot be connected to the tool port of the GT01 It can be connected to the GT11 and GT21 The GT32 cannot be connected to the FP programmer II as it is connected with USB or Ethernet GT01 GT11 GT21 GT30 FP Programmer I Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 5 3 How to Make Communication Settings Using the FPWIN GR Please read below to make PLC communication settings using the FPWIN GR 1 Select PLC system register setting from the Option menu 0 a Aj Eie Ed Wead Search Comment View Onire Debue Tooli Qption Window Heb ale x Merca E T S E Y O Comment Rems gt FPo2TK 7 0 Ofi Home O OOOO O Ol Communication Settings EPWIN GR Confmuratron e Keep Window posit Private Gonfiguration gt 2 The window below will be displaye
104. ient humidity 10 to 90 RH at 25 C non condensing Storage temperature 20 to 60 C Storage humidity 10 to 90 RH at 25 C non condensing Note2 Between power supply terminals and case Breakdowr voltage 500 V AC for 1 minute Cutoff current 10mA at default setting Between power supply terminals and case Insulation resistance 100 MQ or more 500 V DC measured with megohmmeter at default setting 5 to 8 4 Hz half amplitude 3 5 mm Vibration resistance 8 4 to 150 Hz acceleration 9 8 m s2 10 sweeps each in X Y and Z directions 1 octave min Shock resistance 147 m s 4 times on 3 axes EC Directive applicable EN61131 2 EMC Directive Noize tnimunit 1000 V P P or more Pulse width 50 ns 1us between power supply y terminals based on in house measurements Nges resistance Contact Discharge EN61000 4 2 Level 3 IP67 Initial value evaluated by us Protective construction Dustproof and drip proof from front panel only packing used on panel contact surface Note1 When it is installed in a horizontal orientation installed to make the liquid crystal face be topside the usable range is 20 to 55 C Note2 Not isolated between the USB port COM port and the internal digital circuit Note3 When using our exclusive cable Note4 When reattaching replace waterproof packing 6 35 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 9 2 Perfor
105. ii reves aeii nected i iaia iiia a 3 15 3 4 3 RS232C Communication cccecceeeccececeeeeececcaceeeeeeeesecceaaeceeeeeeesecsncaeeeeeeeeeeteteenaees 3 16 3 4 4 RS422 RS485 Communication ssesseseeeseeeresteerresttrrstttrrstttrnstttnnssttnnststtnnnsten nat 3 17 3 5 Precautions when Wiring Ethernet Port GT3271 ccs sccecesseeeeeeesseeeeensseeeeenenees 3 18 CERO oie pk ice cesses AEEA EEES E AEEA O ESEA A EEEE EE 3 19 3 6 1 Backup Battery eenei ede ies aiei eaa eed at eect edna cn E EEEE EETA 3 19 3 6 2 How to Install the Battery Lithium Button Battery 0 o ec ee eeeeeeeeetteeeeetnteeeeeees 3 20 3 6 3 How to Install the Battery Backup Battery 00 ec cceeeeee etter ee eeneeeeetneeeeeetneeeeeeae 3 20 3 6 4 Dead Battery Mark cccececccecccecdenededeeecenseececnndacee cendecchtnaddetiesadeedhennddcecnenneceateeedeechennede 3 21 3 6 5 Time for Replacement of Battery 0 ci eeeeeee etter teeter ee ee tne nese teaser tieeeeeetnaeeeee 3 21 3 6 6 Replacement of Front Panel Protective Sheet c ccccceceeeeeeeeeceeeeeeeeeeseeseaeees 3 21 3 6 7 About the Waterproof Packing ccccccceeeeteeeeeeeneeeeeteneeeeeetiieeeeeeieeeeetieeeeesieeeeeees 3 22 Chapter 4 Connecting With PLC cccccecccesssseeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeenees 4 1 4 1 Connection With PL ssc cess cececics cece dae stn ag shes deaa ceuc etacenecaddeduadsestesstaddesdaaevetetsendeersdtbedes 4 2 4 1 1 PLC Multiple Conne
106. ilm attached to the top of the front panel protective sheet Peel off film Front panel protective sheet sane Protective film Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Replacing the front panel protective sheet For the type without protective film 1 Remove the peel off film attached to the front panel protective sheet 2 Attach the front panel protective sheet Attach the front sheet to fit the liquid crystal part of GT At this time try not to allow the air to get in the attached face If the air was in remove the air to be out with fingers Do not press the front panel hard as it may cause the damage to the touch switch Remove the peel off film attached on the back GT Front panel protective sheet 3 6 7 About the Waterproof Packing If the panel is being detached from the GT and then reattached the waterproof packing should be replaced in order to assure that the panel remains waterproof IP65 however IP67 for GT02 GT12 and GT32 E Replacing the waterproof packing 1 Remove the currently attached waterproof packing Remove the attached waterproof packing from the GT 2 Attach the provided waterproof packing Take out one of the replacement waterproof packing pieces and attach the outer edge as shown in the illustration do not use the inner edge When doing this fasten it to the front frame being sure not to twist the waterproof packi
107. in login Flow display data FP y monitor screen asia 12268 Flow display data FP monitor screen F ROM data 2048 kbytes kbytes Memory Recipe data 64 k bytes Write device data 64 kbytes Alarm history Line graph sampling 27 5 kbytes SRAM Not2 Logging data of Logging function 64 kbytes Hold GT Device 2048 255 words Hold PLC Device 24 words Built in clock data Alarm history data Line graph sampling data Pay Backup Logging data of Logging function Internal device hold data Hold PLC Device data Life Approx 3 years at 25 C Approx 5 years at 25 C Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Note2 A battery is necessary for SRAM backup The unused part of 27 kbytes for Alarm history and line graph sampling can be used for the logging function Note3 Please purchase a battery separately The battery life is the value when no power at all is supplied The actual lifetime may be shorter according to the condition of use Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 4 3 Function Specifications GT05 Item Specifications GT05S GTO5M GT05G Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double quadruple or octuple in height and width True Type GTWIN 10 to 240 dots Windows R 10 to 240 dots Cha
108. inals for driving the main unit Note2 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Interface for transferring screen data TOOL port O i oem Specifications O Conforms to RS232C Non insulation type Baud rate bit s 9600 19200 115200 230400 bps 7 it s Conditions for Data length bit it communications with GTWIN arty 8 None Odd Even 1 Stop bit bit GT dedicated protocol Note1 The baud rate of 230400 bps is available when the USB RS232C conversion cable is used Note2 When the baud rate is set to 230400 bps the connection using the GTWIN automatic communication setting function is not possible Set the GTWIN communication setting to 230400 bps and then transfer data Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 6 GT12 6 6 1 General Specifications GT12 tem Specifications O Insulation method of Transformer insulation power supply part 20 to 85 RH at 25 C non condensing 10 to 85 RH at 25 C non condensing Between power supply terminals and terminals and function earth Breakdown voltage terminal 500 V AC for 1 minute Cutoff current 10mA in initial status Between power supply terminals and terminals and function earth Note1 terminal
109. ing the two fittings and four screws provided with the unit 1 Place the GT main unit in the installation panel 2 Insert the fittings into the grooves provided in the GT main unit and tighten the screws to secure the GT main unit to the installation panel Attachment fittings P Slits located all the way around the periphery GT05 and GT32 The screw tightening torque should be 0 1 to 0 25 N m and tighten them uniformly GT32 E The screw tightening torque should be 0 2 to 0 3 N m and tighten them uniformly Tightening the scews too hard can cause deformation of the front panel so that the touch switches will not function properly Install the GT within the above range Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 9 GT02 GT02L GT12 Installation Method Secure the GT12 or GT02 to the installation panel using the two fittings and four dedicated screws provided with the unit 1 Place the GT main unit in the installation panel 2 Insert the fittings into the grooves provided in the GT main unit and tighten the screws to secure the GT main unit to the installation panel Cross slot screwdriver Take care of the direction of mounting screws Note The cross slot screwdriver No 1 must be used Tightening torque 0 2 to 0 3 Nm Tightening the scews too hard can cause deformation of the front panel so that the touch switches will not function
110. ion Specifications GT01 Item Specifications Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double or quadruple in height and width True Type GTWIN 10 to 64 dots Windows R 10 to 64 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of registerable screens 160 screens N 8 Registerable screen number Base screen No 0 to 3FF Keyboard screen No 0 to 7 Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function switch Lamp Message Data Bar graph Clock Note2 Line graph Keyboard Custom message lamp switch Main functions N Recipe Flow display Write device Multi language exchange Through function Connecting a computer to TOOL port and our PLC to COM port enables the communication between the PLC and the computer Copy function 5 The screen data can be copied by connecting the main units with a cable GTWIN ver Ver 2 30 or later Note1 Maximum allowable number varies depending on registered contents Note2 A clock part can be indicated by referring to external clock data Clock function is not equipped in GT01 Note3 It depend
111. ion Time out Sec Add Entry IP address When it is not displayed set the property of the TCP IP in the items such as Network of the control panel IP address can be input or changed Note The setting procedure varies depending on the OS used For the details refer to the manual help of the OS Port No Set to 0 or within the range of 1025 to 32767 in decimal For using it in the GTWIN set it to 0 Computer IV Acquire IP address automatically IP address Port No 9094 0 1025 32767 Station No 1 64 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net e Setting of destination PLC side IP address Specify the IP address of the GT to be connected in decimal Port No Set it within the range of 1 to 32767 in decimal Default 9094 Specify the same setting as the one of GT Destination IP address 192 168 10 10 Port No 9094 1 32767 Station No 1 64 e Communication time out Set the time out period after connection establishment for every communication within the range of 1 to 950 seconds Default 15 it is not linked to this setting until a connection is estalished e Connection time out Set the time out period until connection establishment within the range of 1 to 180 seconds Default 60 Communication Time out Sec 15 X Connection Time out Sec 60 Ra Setting with IP search tool Config WD exe The setting
112. ion of use Note4 The backlight life varries depending on the usage environment such as temperature humidity or operating voltage Especially if it is used at low temperatures the life will be extremely short Note5 The sound output function is available for GT32T1 only Note6 An Ethernet port is available for GT32T1 only 6 31 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 8 3 Function Specifications GT32 Specifications GT32M GT32T0 GT32T1 Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double quadruple or octuple in height and width True Type GTWIN 10 to 240 dots Windows R 10 to 240 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of Approx 240 screens Approx 180 screens registerable screens Registerable screen Base screen No 0 to 3FF number Keyboard screen No 0 to 7 Login screen No 0 to F Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function switch Lamp Message Data Bar graph Clock Note2 3 Line graph Alarm list Keyboard Custom message lamp switch Recipe SD recipe Flow display Write device Multi language exchange Sound output
113. itch Function switch Lamp Message Data Bar graph Clock Note2 3 Line graph Alarm list Keyboard Custom message lamp switch Main functions N 4 Recipe SD recipe Flow display Write device Multi language exchange Operation security GT link PLC multiple connection Data logging FP monitor Through function Connecting a computer to USB port and our PLC to COM port enables the communication between the PLC and the computer Copy function Screen data can be copied with a SD memory card GTWIN ver Ver 2 CO or later Note1 Maximum allowable number varies depending on registered contents Note2 External clock data can be referred and displayed Note3 Accuracy of the GT internal clock is 90 seconds per month at 25 C Periodically set the clock to the right time for the system in which clock error is a problem Note4 It depends on the version of GT Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 9 4 Interface Specifications GT32 E Interface for connecting PLC External devices COM port ee ee AIG32TQ03DE AIG32TQ05DE eee eee to RS232C Conforms to RS422 Non insulation type Non insulation type Communication Data length bit None Odd Even Stop bit bi fp Total length Baud rate 19200 bit s Baud rate 115200 bit s MEWTOCOL Protocol for PANASONIC PLC FP series General purpose
114. l info ctiautomation net Liquid crystal display panel touch panel Various screens are displayed here A touch panel is provided on the liquid crystal display panel and switches can be operated and data entered simply by touching the panel Optional protective sheets are also available to protect the touch panel and keep it clean A sheet is affixed to the touch panel to protect it from scratches when shipping Please remove it before using the GT 2 SD memory card slot A SD memory card is inserted in this slot Saving from GTWIN Operate on the GTWIN screen using a SD memory card read writer Savving from GT main unit Operate on the SD memory card setting screen under the system menu USB port This is a connector for connecting the screen creation tool The commercal USB cable can be used 2 SD memory access lamp The lamp turns on while accessing a SD memory card Battery cover When using a backup battery to be separately purchased open this battery cover to install it The clock PLC device hold data alarm history and GT internal device hold data functions can be used with the backup battery Operation mode setting switches Setting the operation mode setting switches as follows when turning on the power supply enables the setting to inhibit to move to the system menu or enables to clear F ROM Normal use Inhibit system Factory default menu shift switcnseting Waaa WE e 1234 1234 1234
115. le Cables cccecceeeeeeeteesetteees 1 12 Chapter 2 Names and Functions Of Parrts cccccccssessssseeeeeeeeeeeeeeeeeeeeeeees 2 1 2 1 Part NAMES ora e a T itunes a a a a A 2 2 24 1 GIORGI Tand GTZ len naa abs ede eee AE a ABER ete 2 2 2A2 GT O2 GTOZL sce rca eet ah Seas cee he HE ee 2 4 221 3 GTO5 GT 1 2 6 1 2 sacs an hbk heres Aa oe ee a eats Adc eh oA 2 6 2 2 Terminal Layouts Of COM Port cccssccsseecsseeeeeeeeseneeeeseeeeeneeseaeseseeesnneeeeeeeseseaeenseeneneeees 2 8 D2 ANGLO a e E rele te eel Maree An le Me Pra le Oe etl 2 8 PAEPAE 2 i E E KE oe sl cual Ae N cao lol Ie cote at at Ah teh 2 9 22S GT ODL DIE E A ET E E Suan E A E E a E Sua ees ees 2 10 2L AGTIVO TIZ rirani eo a AA T EA I RE 2 11 ZZ GT P AEAN E PEE E E E E AERA E E E T 2 12 22e GTOS GTS2 G TB 2E aaar a r a r A e e A 2 13 2 3 Connecting to Screen Creation Tool GTWIN s ssssssunssunneunnennunnnnnunnnnnnnnnnnnnnnnnnnnnnnnne 2 14 2 31 TOOL POM Ea R AS AE Ea EER A EE RREA A E S ER A S 2 14 2 32 USB PON fx a R a A E ARES ei A Raed an A aA 2 14 2 3 9 Ethernet POM o a aare ae a eee aa eaten e aE es 2 15 Chapter 3 Installation and Wiring eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeneeeeeeeeees 3 1 SA linstallation eain ERAEN EA RAEE NAAA REKNER AA NEEE R E E EERE ETRE 3 2 3 1 1 Installation EnvirOnment cccccceeeeececceeeeeeeeeeeecaeeeeeeeeesesecaeeeeeeeeeeseesnceeeeeeeeeeeeaees 3 2 3 1 2 Restriction According to Mounting Directions
116. ll the Battery Lithium Button Battery The figures below is explained using the GT11 When installing the battery Insert the head of the battery in the battery holder and push it into the back Press the battery down pushing it into the back of the battery holder When removing the battery Push the battery into the back of the holder Pull up the battery pushing it into the back of the battery holder L ner Note Do not touch the electronic parts when removing and installing the battery 3 6 3 How to Install the Battery Backup Battery The figures below is explained using the GT32 1 Remove the battery cover Ss 2 Sta SS MQ ee 2 Connect the connector to make the red line be the side and place a battery in the circular frame Position where the connector is connected f ona fo i Black side Il mapas ye T UU r Pre Overhead view HEHEH H TIETIEETITEI 3 Fit the battery cover es F Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 6 4 Dead Battery Mark If the battery voltage drops too low the battery mark is displayed at the bottom right of the GT screen When the battery voltage drops y It can be specified in the GTWIN configuration settings whether or not the dead battery mark is displayed cS ne Note If the battery voltage drops too low the BAT LOW flag of the basic co
117. mance Specifications GT32 E Item Specifications GT32M E GT32T E Display device TFT monochrome LCD TFT color LCD Resolution 320 W x 240 H dots Display Displayable area 115 2 W x 86 4 H mm Notei Backlight 1 color LED backlight white Can be adjusted on the menu screen GTWIN configuration settings G nitrast or PLC There are some minor variations in the backlight brightness Touch switch Analog touch switch resistive film type Touch Touch switch 0 8 N or less switches operation Life 1 million times or more at 25 C N Screen data base keyboard login Flow display data FP monitor F ROM screen data 12288 kbytes Recipe data 64 k bytes Memory Write device data 64 kbytes Alarm history Line graph sampling 27 5 kbytes Logging data of Logging function 64 kbytes Hold GT Device 2048 255 words Hold PLC Device 24 words Built in clock data Alarm history data Line graph sampling data patery Backup Logging data of Logging function Internal device hold data Hold PLC Device data Life Approx 3 years at 25 C Note1 On the LCD panel bright spots points always lit or black spots points always unlit may appear or the uneven brightness flickers or crosstalk appearance of unintended shades in the area no graphic or part is arranged may occur depending on the operating conditions Note that these phenomena are resulted from the basic characteristics of
118. mini DIN plug side PLC side Unit mm Signal Name Wire Color Display side PLC side GT series 24V DC RS2326 AIGT8192 AIGT8165 AIGT8160 10000 mm Unshielded variant of AIGT8162 for GT30 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 2 4 AIGT8175 is Unit mm Signals on mini DIN plug side PLC side 5000 Signal Name Wire Color Green 50 aoe pm 7 i 2 36 4 Orange 34 7 E D a 5 58 X f isplay si 6 PLC side ia alas T Mitsubishi GT series Electric made 24V DC FX series RS422 RS485 7 2 5 AIP81842 Unit mm Signals on D SUB side PLC side 2000 50 Pin No Wire Color dot mark is Brown black dot fo Brown red dot o l Yellow black dot Ni Yellow red dot i i Green black dot i Display G d dot reen red dot Our FP2 FP2SH GT series series 24V DC RS232C Display side 1 2 3 4 5 6 T 8 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 3 Table of Screen Messages Table of GT screen messages In addition to screen data the GT also displays the following messages When transferring data from personal computer to a GT This is displayed when data is being transferred from the computer to the GT Transferring Pc gt GT W
119. mmunication area map goes on If the battery has run down completely the BAT flag of the basic communication area map goes on Please be aware that the BAT flag goes on the first time that the power supply is turned on after the unit is purchased The BAT and BAT LOW flags in the basic communication area map activate in the both cases that the battery error display is set to On and Off 3 6 5 Time for Replacement of Battery When replacing the backup battery turn on electricity for the time for energization and replace the battery with a new one within one minute after turning off the power supply If the battery is not replced within the time for replacement the saved data will be lost Time for energization Time for replacement 1 min or more 10 min or more for GT32 Within 1 min 3 6 6 Replacement of Front Panel Protective Sheet About the front panel protective sheet Use the separately sold protective sheets to protect the touch panel surface and to keep it clean Replacing the front panel protective sheet For the type with protective film Follow the steps below to replace the sheet 1 Peel off the seal from the provided protector sheet and attach it to the unit Take out one of the replacement front panel protective sheets and peel off the seal with the shiny side When attaching the sheet align the adhesive edges with the front of the GT Finish by peeling off the thin f
120. nal blocks other than the one for GT01 24 V DC type 24 V DC type GT01 other than GT01 GT side 24V DC RS232C GT side GT01 24V DC RS232C Pin name Signal Pin name Signal 0oO0O0 0000 0 5 V DC type GT01 5 V DC type GT02 GT02L GT side 5V DC RS232C GT side 5V DC RS232C Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 2 2 RS232C Connection with PLC Tool Port Connecting with 5 V DC type AIGT8142 Including power supply GT01 5 V DC type Usable models PLC PLC communication cable Programmable display FP X FP aha FPO FPOR a ees AIGT8142 5 VDC type RS232C type FP e loose wire cable FP2 FP2SH Connecting to the TOOL port PLC side SG Brown sD Red RD Orange 5v White SHELL Black PLC side Pin No Signal Cable color Brown Red Orange White Black 5V SHELL ACS Note Connecting to the COM port is not available Keep the cable no longer than 3 m 5V DC type GT01 GT side 5V DC RS232C Pin name Signal name 5V ov NC NC SD SD RD RD NC NC NC NC SG SG 5V DC type GT02 GT02L GT side 5V DC RS232C Pin name Signal name 5V ov NC NC SD SD RD RD NC NC NC NC SG SG In case of connecting to PLC with all
121. nal device AIG12MQ14D AlG12MQ15D AlIG12GQ04D E Terminal resistance AIG12GQ05D AlG12GQ14D AIG12GQ15D Aes Note There is no RS and CS control lines Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 2 5 GT21 24 V RS232C type 24 V RS422 RS485 type IEF Note Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net A SD SD RD RD COM RS232C 24V J 2 COM RS422 Pin name Name Signal direction Product No 24 V Ov FG Functional ground SD Send data GT External device AIGT2230B RD Receive data GT lt External device AIGT2230H RS Request to send GT External device CS Clear to send GT lt External device SG Signal ground Pin name Name Signal direction Product No 24 V OV FG Functional ground SD Send data GT External device AIGT2232B SD Send data GT External device AIGT2232H RD Receive data GT lt External device RD Receive data GT lt External device E Terminal resistance E There is no RS and CS control lines 2 2 6 GT05 GT32 GT32 E 24 V RS232C type Pin name Name Signal direction Product No 24 V AIGO5MQ02D OV AIGO5MQ03D FG Functional ground AIGO5GQ02D S
122. nalog touch switch resistive film type Touch Touch switch 0 8 N or less switches operation Life 1 million times or more at 25 C Screen data base keyboard login Flow display data FP monitor screen data 2048 kbytes FROM Recipe data 64 k bytes Write device data 64 kbytes Memory z Alarm history Line graph sampling 27 5 kbytes SRAM Note2 Logging data of Logging function 64 kbytes Hold GT Device 2048 255 words Hold PLC Device 24 words Built in clock data Alarm history data Line graph sampling data Battery Baap Logging data of Logging function Nolea Internal device hold data Hold PLC Device data Life Approx 5 years at 25 C Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Note2 A battery is necessary for SRAM backup The unused part of 27 kbytes for Alarm history and line graph sampling can be used for the logging function Note3 Please purchase a battery separately The battery life is the value when no power at all is supplied The actual lifetime may be shorter according to the condition of use Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 6 3 Function Specifications GT12 Item Specifications Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double quadruple or octuple in height and width T
123. ng As for the model with a grooved front frame surely fit the waterproof packing in the groove Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Chapter 4 Connecting with PLC Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 1 Connection with PLC How to connect with PLC Connecting between one GT and one PLC via 1 1 communication Connecting between one GT and multiple PLCs via 1 N communication PLC multiple connection Connecting between one PLC and multiple GTs via 1 N communication GT link Connecting using the general purpose serial communication mode As for the 5 V DC type GT01 power can be supplied with a communication cable only 4 1 1 PLC Multiple Connection PLC multiple connection function is a function that enables more than one PLCs to connect with one GT FP2 FP2SH FPX FP2 MCU FPX FP X FPG COM3 FP2 CB485 FPG COM4 AFPX COM3 RS485 communicatrion A maximum of 31 units can be connected 4 1 2 GT Link Connection GT link function is a function that enables more than one GT to connect with one PLC GT station No 31 GT station No 1 GT station No 0 GT station RS485 communicaiton A maximum of 32 units can be connected Wiring of Power Supply It takes more than 5 seconds for all GT units to be operable
124. ng and placement of the cable so that there is no impression of external noise on the cable and no induction Use shielded wires for distribution cables Recommended cable AIGT8142 with one ferrite core It conforms to CE marking As conditions the following wiring is required 1 Make the cable do three turns around a ferrite core Recommended ferrite core Seiwa Electric s E04RA190120080 or equivalent 2 Perform grounding of the cable shield Packaged with AIGT8142 100 mm max 28 mm max n gt 33 turns 5 Ferrite core _ AN Shield mms QH RS422 RS485 type There is no RS and CS control lines Perform wiring and placement of the cable so that there is no impression of external noise on the cable and no induction Use shielded wires for distribution cables Recommended cable AIGT8152 with one ferrite core Seiwa Electric s E04RA190120080 When using shielded cable with crossover wiring for the RS485 transmission line grounded one end E is used to set the terminating station It does not conform to European EMC directive 100 mm max 28 mm max S93 turns ANG pad Ferrite core Shield g Key Point The CE marking standards that the GT01 conforms to excluding the RS422 RS485 type European EMC directive 2004 108 EC European EMC standards EN61000 6 4 and EN61000 6 2 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautom
125. nit number setting on GT when using General purpose serial SD memory card copy to password protected GT Connection between multiple units with Modbus RTU master Output to Panasonic FP series X device Jump to the prvious screen from Screen No Error screen GT01 Ver 1 37 Jump to the prvious screen from Screen No Error screen GT11 Ver 1 27 Reverse display function Ver 2 983 GT05 Ver 1 42 Bug fixing GT12 Ver 1 12 GT32 Ver 1 52 Ver 2 99 GT05 Ver 1 50 Functions for devices such as Temperature control device of GT12 Ver 1 20 MODBUS RTU mode GT32 Ver 1 60 Display of data parts in Chinese and Korean Graph display of logging device data for logging function Bar graph of line graph parts Fixed line of line graph parts aa a RF Display Hide of keyboard partsinGTWIN sd Ver 2 A0 GT02 Ver 1 00 New model ANew release occu bate es hg eee et eee a GT05 Ver 1 60 SD recipe function GT12 Ver 1 30 Function for communication errors in case of PLC multiple GT32 Ver 1 70 connection Alarm history data save in SD memory card GT05 Ver 1 40 Multiplication and division of write device data 77777777 GT12 Ver 1 30 GT32 Ver 1 20 Ver 2 B0 GTO2L Ver 1 00 New model GT02L KOCA or cal Pals usa siele publecploeant nla abe uuauniatauinatasdawescccesuseeeeastsesl GT02 Ver 1 10 True Type font for data parts GT05 Ver 1 70 GT12 Ver 1 40 GT32 Ver 1 80 xix Phone 800 894 0412 Fa
126. nsfer cable is not connected 1 Confirm that the screen transfer cable is correctly and firmly connected 2 The PC and GT COM port are connected 2 Connect to TOOL port with screen transfer cable 3 The TOOL port of the GT has been set to 230400 bps 3 Set the baud rate for the GTWIN communication condition to 230400 bps before transfer data 4 The network type in the communication settings has been set to either Ethernet or USB 4 Set the network type in the communication settings to RS232C Screen is blank power supply and substitution settings noted above do not apply An incorrect screen is displayed error codes and erroneous date and time items noted above do not apply Switch doesn t work grid and validity settings noted above are correct Buzzer sounds continuously An error has occurred in the GT system 1 After confirming the safety of the device etc turn off the power supply and then turn it on again The GT CPU will be reset 4 2 If 1 produces no change bring up the system menu and initialize the memory F ROM then transfer data again from GTWIN to the GT NOTE When doing this all base screen data GT setting data keyboard screen data and bitmap data will be lose Before doing this make sure all data has been backed up 3 If 2 produces no change set the operating mode setting switches 2 3 and 4 on
127. nt a ERA Speen ne ee Re supply power to the PLC and GT PP 2 There is an error in the CPU unit Re supply power to the PLC command to the and GT PLC BUSY error The PLC is A large amount of data is being communicated with another ER53 currently RS232C port on the PLC processing another Wait until the error is gone command ER60 Parameter errror The specified parameter does not exist or it cannot be used Data run error A register or relay number which doesn t exist in the PLC was ER61 There is an error in specified during screen creation using GTWIN the register or Correct the output device being used with the part or the transfer relay number of clock data to an external device Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net For GT02 GT02L GT05 GT12 GT32 and GT32 E Code No Content Cause and solution Data error 1 There is an error in the communication condition settings Check A data error the PLC and GT baud rate and transfer format ER0021 occurred during 2 There is a temporary error due to noise etc Re supply power to communication the PLC and GT Overrun error The CPU unit s reception buffer is overflowing ERO022 The PLC isn t There could be an error in the PLC receiving data Re supply power to the PLC and GT BCC error 1 There is a temporary error due to noise etc ER0040 A data error Re supply power to the PLC and GT occ
128. o 8 4 Hz half amplitude 3 5 mm Vibration resistance 8 4 to 150 Hz acceleration 9 8 mis 10 sweeps each in X Y and Z directions 1 octave min contact surface e Note1 When supplying the power from the TOOL port of a PLC CPU unit comfirm the PLC restrictions such as the power supply capacity before use Note2 When using our exclusive cable Note3 When reattaching replace waterproof packing Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 2 2 Performance Specifications GT02 item Specifications GT02M GT02G Display device STN monochrome LCD Resolution 240 W x 96 H dots Displayable 88 5 W x 35 4 H mm area Display Backlight 3 color LED bakclight white pink 3 color LED backlight green red orange red Backlight brightness can be adjusted on the menu screen or GTWIN Backlight 3 j brightness configuration settings ow l l l There are some minor variations in the backlight brightness Contrast Contrast can be adjusted on the menu screen Touch switch Analog touch switch resistive film type Touch F switches ore 0 8 N or less Life 1 million times or more at 25 C Screen data base keyboard login Flow display data FP monitor ae screen data 2048 kbytes meee Recipe data 64 k bytes Memory Write device data 64 kbytes Alarm history Line graph sampling 27 5 kbytes SRAM
129. o power supply GT series Usable models PLC PLC communication cable Programmable display 5V DC FP e Loose wire cable 24 V DC RS232C type Connecting to the FP e RS232C To PLC side power GT side 24V DC RS232C supply Pinname Signal iz Pinname Signal __ O Oj FG COM oa RS232C Q O RS of cs SG Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 2 7 RS232C Connection with FP2 FP2SH COM Port Connecting to the COM port FP2 FP2SH CPU unit To power supply 0 GT series To power supply AIP81842 i GT series To power supply AIP81842 GT series Usable models PLC PLC communication cable Programmable display FP2 FP2CH CPU unit FP2 Computer Communication Unit FP2 Multi Communication ee AIP81842 5VDC RS232C type Communication block 24 V DC Unit FP2 CB232 Connecting to the TOOL port PLC side poy GT side 24V DC RS232C Signal Cable color Dot mark Pin name Signal Brown Black dot ah Brown Red dot C a Yellow Black dot FG Yellow Red dot sD Green Black dot O o RD C RS Green Red dot C cs SG aAbWwWN oo000 oo00 OoOnN 2 3 4 5 6 7 8 9 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 3 RS4
130. of 115 2 kbps Note2 Take care of handling of the connector not to add an excessive static electricy on the metal part of the connector Note3 Do not use a STP cable shielded wire Note4 Ethernet is a trademark of Zerox Corporation USA Note5 Simultaneous communication with the USB port is not achievable SD memory card slot Item Specifications Support media SD memory card SDHC memory card Supported format standard Conforms to SD standard N Note1 The manufacturer name that the operation check has done Panasonic Corporation Usable capacity of a SD memory card varies according to the version of GT firmware Note2 Please format with a format software for SD memory cards Note3 The SD access lamp turns on while acccessing the SD memory card 6 8 5 Sound Output Specifications GT32T1 Only GT32T1 File format WAV format PCM format sampling 8 KHz 16 bits monoral Max sound data capacity 512 kbytes Approx 30 seconds Max registered No of sound data 128 Sound output voltage 2 Vp p Output terminal 3 5 stereo mini jack Connecting amplifier Input impedance 10 kQ or more Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 9 GT32 E 6 9 1 General Specifications GT32 E Stem f srr eton GT32T E Insulation method of gt i Transformer insulation power supply part Ambient temperature 20 to 60 C Amb
131. of the connector SD memory card slot For GT12M1 GT12G1 only Item Specifications Support media SD memory card SDHC memory card Supported format standard Conforms to SD standard Note1 The manufacturer name that the operation check has done Panasonic Corporation Usable capacity of a SD memory card varies according to the version of GT firmware Note2 Please format with a format software for SD memory cards Note3 The SD access lamp turns on while acccessing the SD memory card Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 7 GT21 6 7 1 General Specifications GT21 Specifications Rated voltage 24 V DC 21 6 to 26 4 V DC 0 to 50 c 20 to 85 RH at 25 C non condensing 10 to 85 RH at 25 C non condensing Between power supply terminals and case Between power N terminals and case Insulation resistance 100 MQ or more 500 V DC measured with megohmmeter at default setting 10 to 55 Hz 1 minute cycle Vibration resistance Amplitude 0 75 mm 10 min on 3 axes f 98 m s or more Shock resistance 4 times on 3 axes EC Directive applicable EMC Directive EN61000 6 2 EN61000 6 4 Noise immunit 1000 V P P or more Pulse width 50 ns 1us between power supply y terminals based on in house measurements IP65 Initial value evaluated by us Protective construction Dustproof and drip proof
132. old data Hold PLC Device data Life Approx 2 years at 25 C Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Note2 A battery is necessary for SRAM backup Note3 Please purchase a battery separately The battery life is the value when no power at all is supplied The actual lifetime may be shorter according to the condition of use Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 7 3 Function Specifications GT21 Item Specifications Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double or quadruple in height and width True Type GTWIN 10 to 240 dots Windows R 10 to 240 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of registerable screens 250 screens N 8 Registerable screen number Base screen No 0 to 3FF Keyboard screen No 0 to 7 Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function switch Lamp Message Data Bar graph Clock Note2 3 Line graph Alarm list Alarm history Keyboard Custom message lamp switch Main functions
133. ommended cable AlGT8162 It conforms to CE marking As conditions the following wiring is required 1 Install a ferrite core to the cable For GT11 only Recommended ferrite core Seiwa Electric s E04SR170730A or equivalent 2 Perform grounding of the cable shield 3 Perform grounding of the GT GT01 GT02 GT12 GT11 70mm max Power line Shield Shield Installing Ferrite core GT21 GT05 GT32 GT32 E Power line Shield The CE marking standards that the GT series conforms to European EMC directive 2004 108 EC European EMC standards For GT01 GT11 GT21 EN61000 6 4 and EN61000 6 2 For GT02 GT12 GT05 GT32 GT32 E EN61131 2 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 4 4 RS422 RS485 Communication There is no RS and CS control lines Perform wiring and placement of the cable so that there is no impression of external noise on the cable and no induction Use shielded wires for distribution cables Recommended cable AIGT8175 for Mitsubishi FX series When using shielded cable with crossover wiring for the RS485 transmission line grounded one end E is used to set the terminal unit It conforms to CE marking As conditions the following wiring is required 1 Fit a ferrite core to the cable For GT11 only Recommended ferrite core Seiwa Electric s E04SR170730A or equivalent 2 Perform groundin
134. onnecting to the COM port To power supply GT series Usable models PLC PLC communication cable Programmable display FP aad aia L i bl 23N DE RS422 RS485 t oose wire cable e AFPG806 24 V DC i Connecting to the 1 channel type RS485 AFPG803 1 1 communication To power GT side 24V DC RS422 485 supply 44 p PLC side EE i l l gt Short circuit Short circuit PLC multiple communication To power GT side 24V DC RS422 485 supply A4 PLC side Terminal unit PLC side General unit Pin name Signal Pin name Signal Short circuit GT Link Function t GT side General unit GT side Terminal unit Power 24V DC RS422 485 To power 24V DC RS422 485 supply supply tt Pin name Signal tt PLC side General unit 4 4 Pin name Signal C O e 4 o Loe i o a Short E E ag Short circuit circuit eS ne Note Check the usable GT models for 1 N communication Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Connecting to the 1 channel type RS485 and 1 channel type RS232C AFPG806 1 1 communication PLC side Terminal block GT side 24V DC RS422 485 _Pinname Signal tt lt O P Eee HEH C AFPG806 o arrr ee g Cassette rear switch No 1 ON No 2 Baud rate PLC multiple communication PLC side Terminal unit PLC side General unit
135. or any other equipment that would generate high switching surges 100 mm or more Static electricity Do not touch connector pins directly to prevent static electricity from causing damage Always rid yourself of any static electricity before handling this product If excessive estatic electricity is applied to the panel surface the LCD panel unit may be damaged vii Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Power supply Twist the wires of the power supply The unit has sufficient noise immunity against the noise generated on the power line However it is recommended to take measures for reducing noise such as using an isolating transformer before supplying the power And it is recommended to take measures such as installing a ferrite core Allocate an independent wiring for each power supplying line PLC etc and operating device If using a power supply withoug a protective circuit power should be supplied through a protective element such as fuse Directly applying an abnormal voltage to the unit may cause the damage to the internal circuit Touch switches Always operate the touch switch with fingers As the touch switch may be damaged due to the excessive load or shock caused when being operated with any tools the touch switch should be operated within the specified control force Also if the touch swich is pressed like kneading the electrode may be worn out
136. or cable pe aide GT side Specification Product No connector connector l ili if I o L type 3m AFC8503 Mn i n Mini DIN He D sub 9 pin Sund 5 pin P o Ji Straight type AFC8503S 3m Note A USB RS232C conversion cable is necessary to connect with a personal computer without a serial port using a PC connection cable LAN cable Ethernet port GT32T1 Either straight cable or crossing cable can be used MDI MDI X Automatic crossover function Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Chapter 2 Names and Functions of Parts Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 1 Part Names 2 1 1 GT01 GT11 and GT21 GT01 GTO1R GT11 GT21 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Touch screen Various screens are displayed here Switches can be operated and data entered simply by touching the touch screen A sheet is affixed to the touch panel to protect it from scratches when shipping Please remove it before using the GT Optional protective sheets are available to protect the touch screen surface and keep it clean gt A Reference lt 1 4 2 Options and
137. or more GT32 GT32 E It should be 40 mm or more when using a SD memory card 3 1 4 UL c UL Qualification Be aware of the following when applying for UL standard for the equipment that the GT has been built in e When the GT built in equipment the GT should meet the standard as a part of the enclosure e As the rear of the GT is not qualified as an enclosure provide a fire enclosure metal barrier that entirely covers the rear and lateral sides of the GT 3 4 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 5 Mounting Screws Secure the GT to a mounting plate using the fitting and screws provided with the unit Recommended screws Recommended product GT unit Size Others Quantity GT01 GT11 M3 20 Material SW pane head Mounting screw GT05 GT21 GT32 M3 3 5 Galvanization 4 pcs unit GT32 E i trivalent chromate GT02 GT02L GT12 dedicated screw The GT02 GT02L GT12 dedicated screw is not sold on the open market Using screws other than the dedicated screw will cause failures such as decrease of water proof property Name Content Model No Attachment fitin 5 sets for GT02 GT02L GT12 ng 4 pcs of attachment fittings and 4 pcs of dedicated AIG12830 with dedicated screws screws set 3 5 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 6
138. ow allowed Other device Other device GT such as inverter GT such as inverter a ae Note Conversely depending on your environment grounding may cause a problem Example Since the power line of the GT unit is connected to a functional earth via electronic parts the electronic parts may become damaged if there is an abnormal potential between the power line and the physical ground 5 or 24 VDC OV t Functional earth J o bress GT power line Do not ground the function earth when grounding a plus terminal of the power excluding GT02 GT02L GT05 GT12 GT32 and GT32 E In some computers the SG terminal of RS232C port and connector shielding are connected Also the tool port shielding is connected with the function earth terminal Therefore the GND terminal and the function earth terminal are connected if the computer is connected Especially when the GT is connected to a computer with a plus terminal grounded therefore an GT s minus terminal is connected with the function earth terminal As a result short circuit occurs which may lead to the breakage of GT and its neighboring parts Personal SG Cable Sl computer Q e eae eraann i O Shielding Shielding Grounding Grounding Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 3 Wiring the COM Port Accessory communication connector applicable wi
139. p in the GT configuration Except GTO2L settings in GTWIN is set to Disabled Nothing Communication conditions of GT Verify communication settings of GT and PLC and happens for COM port and PLC differ then make them the same about 10 seconds after turning on power Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Problem Cause Solution Buzzer sounds continuously Bit F of the first word in the basic communication area bit device is set to ON Set the F bit to OFF on the PLC side Do not use the basic communication area with ladder programs Backlight color changes flashes Bits A and B and Bit D of the first word backlight color setting in the basic communication area bit device are set to ON Or Bits C and D backlight flashing setting are set to ON Perform correct bit operations on the PLC side Do not use the b asic communication area with ladder programs Cannot transfer data from GTWIN 1 The USB or LAN cable GT32T1 is not connected 1 Confirm that the screen transfer cable is correctly and firmly connected 2 The PC and GT COM port are connected 2 Connect the USB cable or LAN cable GT32T1 correctly 3 The network type in the communication settings has been set to RS232C 3 Set the network type in the communication settings to Ethernet for using a LAN cable Set the network t
140. plies to initial values Influence from power transmission lines high voltage equipment power cables power equipment radio transmitters or any other equipment that would generate high switching surges 100 mm or more The usage conditions for Tough series GT32 E are as follows Ambient temperatures 20 to 60 C When horizontally installed 20 to 55 C Ambient humidity 10 to 90 RH at 25 C non condensing The upper limit of the humidity at each temperature is as below Below 40 C 90 RH 50 C 55 RH 60 C 35 RH If the product is exposed to heavy rain condensation might be caused by sudden temperature changes Altitude of 2000 m or less For use in pollution Degree 2 environment Do not use it in the following environments Direct sunlight for a long time Exposing the product to direct sunlight increases the surface temperature of the display higher than ambient temperature and causes deterioration of LDC panel Inflammable or corrosive gas Excessive airborne dust metal particles or saline matter Benzine paint thinner alcohol or other organic solvents or strong alkaline solutions such as ammonia or caustic soda Direct vibration shock or places always exposed to drop of water This unit is warranted by IP67 for panel mounting however this applies to initial values Influence from power transmission lines high voltage equipment power cables power equipment radio transmitters
141. properly 3 8 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 10 Installing in Vertical Orientation Normally the GT series is installed horizontally long however some models can be installed vertically long At that time the right side becomes the upper side GT01 GT02_ GTO2L IES Note The side that the COM port is situated becomes the upper side If the GT is installed upside down the screen will be upside down The allowable ambient temperature for GT11 is different Ambient temperature 0 to 45 C g Key Point Select the vertical type when selecting a GT model in GTWIN Select Model GTModel ror zj 64x128 Monochrome X 128 x 64 Monochrome PLC Model 64x128 Monochrome l Keep Current Settings 3 1 11 Precaution When reinstalling GT When the GT is reinstalled after being removed from the panel the water proof packing should be replaced Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 2 Wiring the Power Supply 3 2 1 Wiring the Power supply The power supply should be wired by securely connecting the terminal on the rear of the main unit to the terminal Use twisted wiring for the power supply In order to minimize influence from noise the wiring for the power supply should be twisted Insulate the power supply inside a protec
142. r Alarm History 1 00 or later Not available 2 A0 or later List 1 00 or later 1 00 or later 2 A0 or later Keyboard 1 00 or later 1 00 or later 1 00 or later Custom 1 00 or later 1 00 or later 1 00 or later Other Recipe Recipe 1 00 or later 1 00 or later 2 A0 or later functions SD recipe 1 00 or later Not available 2 A0 or later Flow display 1 00 or later 1 00 or later 2 A0 or later Write device 1 00 or later 1 00 or later 2 A0 or later Sound Not available Not available Not available Password 1 00 or later 1 00 or later 2 A0 or later Password 7 F Operation security 1 00 or later 1 00 or later 2 A0 or later Multi language exchange 1 00 or later 1 00 or later 2 A0 or later Logging function 1 00 or later Not available 2 A0 or later FP monitor function 1 30 or later 1 30 or later 2 C0 or later Display panel sideways setting 1 00 or later 1 00 or later 2 A0 or later Copy Cable between GTs Not available Not available Not available SD memory card 1 00 or later Not available 2 A0 or later GT link 1 00 or later 1 00 or later 2 A0 or later PLC multiple connection 1 00 or later 1 00 or later 2 A0 or later Note1 Only referring to PLC can be set Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Xi Version of GTO2L and available functions Function GT02L GTWIN Parts Switch 1 00 or later 2 B0 or later lib
143. racter types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of registerable screens Approx 180 screens Approx 240 screens Registerable screen number Base screen No 0 to 3FF Keyboard screen No 0 to 7 Login screen No 0 to F Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function switch Lamp Message Data Bar graph Clock Note2 3 Line graph Alarm list Keyboard Custom message lamp switch Main functions N 4 Recipe SD recipe Flow display Write device Multi language exchange Operation security GT link PLC multiple connection Data logging FP monitor Through function Connecting a computer to USB port and our PLC to COM port enables the communication between the PLC and the computer Copy function Screen data can be copied with a SD memory card GTWIN ver Ver 2 90 or later Note1 Maximum allowable number varies depending on registered contents Note2 External clock data can be referred and displayed Note3 Accuracy of the GT internal clock is 180 seconds per month Note4 It depends on the version of GT Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net
144. rary Lamp 1 00 or later 2 B0 or later Message 1 00 or later 2 B0 or later Data 1 00 or later 2 B0 or later Bar graph 1 00 or later 2 B0 or later Clock 1 00 or later 2 B0 or later Line graph 1 00 or later 2 B0 or later Alari History Not available 2 B0 or later List 1 00 or later 2 B0 or later Keyboard 1 00 or later 1 00 or later Custom 1 00 or later 1 00 or later Other Recipe Recipe 1 00 or later 2 B0 or later functions SD recipe Not available 2 B0 or later Flow display 1 00 or later 2 B0 or later Write device 1 00 or later 2 B0 or later Sound Not available Not available Password 1 00 or later 2 B0 or later Password 3 Operation security 1 00 or later 2 B0 or later Multi language exchange 1 00 or later 2 B0 or later Logging function Not available Not available FP monitor function 1 20 or later 2 C0 or later Display panel sideways setting 1 00 or later 2 B0 or later Copy Cable between GTs Not available Not available SD memory card Not available Not available GT link 1 00 or later 2 B0 or later PLC multiple connection 1 00 or later 2 B0 or later Note1 Only referring to PLC can be set Ss MD Note The buzzer function is not available for GTO2L All the functions related to the buzzer are unsupported xii Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Version of GT05 and available functions
145. reen operation The screens can be switched on the GT by using the function switching parts provided in the parts library of the GTWIN that has a function to switch the screens ____ Screen No 1 Seen No 2_ l f wee The switch The switch Al ison The screen is changed when B isonft the function switch is on Change Screen setting No 2 Set to Return to Previous Screen Switching automatically The GT man unit has an Auto paging function in the configuration setting that automatically switches the screen to a specified screen number when a certain period of time has elapsed This function can be used to switch screens automatically After 10 seconds After 5 seconds Screen No 1 Screen No 2 Screen No 3 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Through function is convenient for debugging A convenient through function makes it possible to transfer data from the GT and carry out PLC debugging at the same time that communication is going on between the GT and the FP series PLC This significantly boosts efficiency in the workplace For TOOL port models Cable connected to the TOOL port GT PLC debugging note a Screen data cable being sent AFC8503 and received The FPWIN or other software can be booted on the computer being used to edit GT series screens and PLC programs edited and
146. rganic solvents or strong alkaline solutions such as ammonia or caustic soda Direct vibration shock or places always exposed to drop of water This unit is warranted by IP65 IP67 depending on models for panel mounting however this applies to initial values Influence from power transmission lines high voltage equipment power cables power equipment radio transmitters or any other equipment that would generate high switching surges 100 mm or more The usage conditions for Tough series GT32 E are as follows Ambient temperatures 20 to 60 C When horizontally installed 20 to 55 C Ambient humidity 10 to 90 RH at 25 C non condensing The upper limit of the humidity at each temperature is as below Below 40 C 90 RH 50 C 55 RH 60 C 35 RH If the product is exposed to heavy rain condensation might be caused by sudden temperature changes Altitude of 2000 m or less For use in pollution Degree 2 environment Do not use it in the following environments Direct sunlight for a long time Exposing the product to direct sunlight increases the surface temperature of the display higher than ambient temperature and causes deterioration of LDC panel Inflammable or corrosive gas Excessive airborne dust metal particles or saline matter Benzine paint thinner alcohol or other organic solvents or strong alkaline solutions such as ammonia or caustic soda Direct vibration shock or places alway
147. ring The communication connector used for the COM port provided as an accessory with the main unit has a screw tightening type of terminal block The wiring shown below should be used Applicable wiring twisted wiring Size Conductor cross section surface area AWG 28 to 16 0 08 to 1 25 mm Use a special tool to tighten the terminal block of the communication connector Using a screwdriver made by Panasonic Electric Works Co Ltd Product number AFP0806 The tightening torque should be 0 22 to 0 3 N m or less When doing RS485 communication using RS422 type Please use the following cables or equivalent Appropriate electrical cables twisted cables Conductor Insulator a z Sample Type Cross sectional Resist Thick Cable appropriate view Size ance Material ee diam Eble at 20 C Belden 9860 1 25 mm Max Hitachi Cable Polye Max Approx AWG16 16 8 Ltd KPEV Qk thylene 0 5mm 8 5 mm 1 25 2 Shielded Shieid _ Cover or greater m ee x twisted con A Dy nsu pair ductor 4 ag enor Belden 9207 2 a 0 5mm Max Hitachi Cable Polye Max Approx AWG20 33 4 Ltd KPEV thylene 0 5mm 7 8mm P or greater Q km S0 5 mm x 1P a Note e Use shielded twisted pair cables e Use only one type of transmission cable Do not mix more than 1 type e When using shielded cable with crossover wiring for the RS485 transmission line grounded one end
148. rue Type GTWIN 10 to 120 dots Windows R 10 to 120 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of registerable screens 2 gradation 250 screens 8 gradation 200screens Registerable screen number Base screen No 0 to 3FF Keyboard screen No 0 to 7 Login screen No 0 to F Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function switch Lamp Message Data Bar graph Clock Note2 3 Line graph Alarm list Keyboard Custom message lamp switch Main functions X 4 Recipe SD recipe Flow display Write device Multi language exchange Operation security GT link PLC multiple connection Data logging FP monitor Note5 Through function Connecting a computer to USB port and our PLC to COM port enables the communication between the PLC and the computer Copy function Screen data can be copied with a SD memory card GTWIN ver Ver 2 97 or later Note1 Maximum allowable number varies depending on registered contents Note2 External clock data can be referred and displayed Note4 Note3 Accuracy of the GT internal clock is 180 seconds per month It depends on the version of GT
149. s Displayable fonts Fixed GTWIN 1 4 width 8 x 8 half width 16 x 8 full width 16 x 16 Double quadruple or octuple in height and width True Type GTWIN 10 to 64 dots Windows R 10 to 64 dots Character types English Japanese Korean German French Italian Spanish Simplified Chinese Traditional Chinese characters and Turkish can be displayed Number of registerable screens 80 screens N Registerable screen number Base screen No 0 to 3FF Keyboard screen No 0 to 7 Login screen No 0 to F Graphics Straight lines continuous straight lines squares circles ovals arcs elliptic arcs fan shapes elliptic fan shapes beveled squares Types of parts Switch Function switch Lamp Message Data Bar graph Clock Note2 Line graph Alarm list Keyboard Custom message lamp switch Main functions N Recipe Flow display Write device Multi language exchange Operation security GT link PLC multiple connection FP monitor Through function Connecting a computer to USB port and our PLC to COM port enables the communication between the PLC and the computer GTWIN ver Ver 2 B0 or later Note1 Maximum allowable number varies depending on registered contents Note2 External clock data can be referred and displayed Note3 It depends on the version of GT Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info c
150. s exposed to drop of water This unit is warranted by IP67 for panel mounting however this applies to initial values Influence from power transmission lines high voltage equipment power cables power equipment radio transmitters or any other equipment that would generate high switching surges 100 mm or more Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Static electricity Do not touch connector pins directly to prevent static electricity from causing damage Always rid yourself of any static electricity before handling this product If excessive estatic electricity is applied to the panel surface the LCD panel may be damaged Power supply Twist the wires of the power supply The unit has sufficient noise immunity against the noise generated on the power line However it is recommended to take measures for reducing noise such as using an isolating transformer before supplying the power And it is recommended to take measures such as installing a ferrite core Allocate an independent wiring for each power supplying line PLC etc and operating device If using a power supply withoug a protective circuit power should be supplied through a protective element such as fuse Directly applying an abnormal voltage to the unit may cause the damage to the internal circuit Touch switches Always operate the touch switch with fingers As the touch switch may be damaged
151. s have been set for the 1 Check that the device status conditions on the PLC doesn t work switch part but those conditions have side are valid not been met No operating 1 The Switch Sounds setting under 1 Change the setting to Enabled sounds are Options in the switch part attributes heard when is set to Disabled the touch 2 The Touch Sounds setting under 2 Change the setting to Enabled panel is Setup in the GT configuration pressed settings in GTWIN is set to Disabled Nothing Communication conditions of GT COM Verify communication settings of GT and PLC and happens for port and PLC differ then make them the same about 10 seconds after turning on power Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Problem Cause Solution Buzzer sounds continuously Bit F of the first word in the basic communication area bit device is set to ON Set the F bit to OFF on the PLC side Do not use the basic communication area with ladder programs Backlight color changes flashes Bits A and B and Bit D of the first word backlight color setting in the basic communication area bit device are set to ON Or Bits C and D backlight flashing setting are set to ON Perform correct bit operations on the PLC side Do not use the basic communication area with ladder programs Cannot transfer data from GTWIN 1 The screen tra
152. s of the GT can be specified with the IP address search tool of Configurator WD Ver 1 11 or later The IP search tool Config WD Exe can be downloaded for free from our website User registration is required Free of charge Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Chapter 3 Installation and Wiring Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 1 Installation 3 1 1 Installation Environment When installing and using the GT series always make sure the following conditions are observed Usage conditions Operating environment Use the unit within the range of the general specifications when installing Ambient temperatures 0 to 50 C It varies according to models when installing the unit in a horizontal orientation or using a C NET adapter and FP programmer II Ambient humidity 20 to 85 RH at 25 C non condensing Altitude of 2000 m or less For use in pollution Degree 2 environment Do not use it in the following environments Direct sunlight wind and rain This product is not designed for outdoor use Sudden temperature changes causing condensation Inflammable or corrosive gas Excessive airborne dust metal particles or saline matter Benzine paint thinner alcohol or other o
153. s on the version of GT Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 1 4 Interface Specifications GT01 Interface for connecting PLC External devices COM port AIGT0030B1 AIGT0030H1 AE MARE PUSH SAE AIGT0032H1 AIGT0032H AIGT0030B AIGT0030H AIGT0132B1 AIGT0132B AIGT0130B1 AIGT0130H1 AIGT0132H1 AIGT0132H AIGT0130B AIGT0130H AIGT0232B1 AIGT0232B AIGT0230B1 AIGT0230H1 AIGT0230B AIG0230H AIGT0232H1 AIGT0232H 5 VDC 24 VDC ee Conforms to RS232C Conforms to RS422 Communication standard z j Non insulation type Non insulation type c icati Baud rate bit s 9600 19200 38400 57600 115200 bps ommunication Data length bit 7 8 condition with i Parity None Odd Even external devices it 1 Stop bit bit Transmission distance Max 15 m Pa Bend i P Total length Baud rate 19 200 bit s 115 200 bit s 115 200 bit s MEWTOCOL Protocol for PANASONIC PLC FP series General purpose serial PANASONIC dedicated protocol Other companies PLC protocols For the details refer to the latest GTWIN HELP Note1 The and terminals are the power supply terminals for driving the main unit Note2 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Note3 Wen supplying power from a power supply separate from the PLC make sure the power cable is no
154. serial PANASONIC dedicated Basa Other companies PLC protocols For the details refer to the latest GTWIN HELP Note It is internally isolated from the input power supply side between 24V and OV Note2 The and terminals are the power supply terminals for driving the main unit Note3 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Interface for transferring screen data USB port Sa Cel Specifications Communication standard USB1 1 Connector shape TYPE B Trasmission distance Max 5m No of connected unit with PC 1 unit Note1 Take care of handling of the connector not to add an excessive static electricy on the metal part of the connector SD memory card slot Item Specifications Support media SD memory card SDHC memory card The manufacturer name that the operation check has done Panasonic Corporation Supported format standard Conforms to SD standard Please format with a format software for SD memory cards Note1 Check the usable temperature range of a SD memory card to be used before use Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Chapter 7 Dimensions and Other Documentation 7 1 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 Dim
155. st to send GT External device CS Clear to send GT lt External device SG Signal ground 5 V RS422 RS485 type Pin name Name Signal direction Product No 5V _ OV Aa FG Functional ground F SD Send data GT External device g SD Send data GT External device AlGOZEO0ID amp RD Receive data GT lt External device RD Receive data GT lt External device E Terminal resistance 7 Note There is no RS and CS control lines Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 2 4 GT11 GT12 24 V RS232C type Pin name Name Signal direction Product No 24 V AIGT2030B OV AIGT2030H Ek E FG Functional ground AIGT2130B A SD Send data GT External device AIGT2130H x sD Jg RD Receive data GT lt External device AlG12MQ02D ie RD S RS Request to send GT External device AlIG12MQ03D rt s S AIG12MQ12D CS z CS Clear to send GT lt External device se JS AIG12MQ13D AIG12GQ02D SG Signal ground AIG12GQ03D AIG12GQ12D AIG12GQ13D 24 V RS422 RS485 type Pin name Name Signal direction Product No 24 V AIGT2032B OV AIGT2032H E FG Functional ground AIGT2132B SD Send data GT External device AIGT2132H zx SD Send data GT External device AIG12MQ04D RD Receive data GT lt External device AIG12MQ05D HH RD Receive data GT lt Exter
156. ta GT External device AIGT0130B O RD Receive data GT lt External device AIGT0130H NC Not connected p AIGT0230B NC Not connected AIGT0230H SG Signal ground z MB Note There is no RS and CS control lines 24 V RS422 RS485 type Pin name Name Signal direction Product No EN 24 V OV AIGT0032B ER FG Functional ground AIGT0032H SD Send data GT External device AIGT0132B SD Send data GT External device AIGT0132H Le RD Receive data GT lt External device AIGT0232B RD Receive data GT lt External device _ AlIGT0232H E Terminal resistance Note There is no RS and CS control lines Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 2 2 GT02 5 V RS232C type Pin name Name Signal direction Product No 5V OV FG Functional ground z AIG02MQ02D SD Send data GT External device AIGO2MQ03D RD Receive data GT lt External device AIGO2GQ02D RS Request to send GT External device AIGO2GQ03D CS Clear to send GT lt External device SG Signal ground e Pin name Name Signal direction Product No i 5 V A a Je fov SD FG Functional ground AIGO2MQ04D a Zo SD Send data GT External device AIGO2MQ05D d RD O amp SD Send data GT External device
157. tal part of the connector SD memory card slot For GT02M2 GT02G2 only Specifications Support media SD memory card SDHC memory card Note1 Supported format standard Conforms to SD standard Note1 The manufacturer name that the operation check has done Panasonic Corporation Note2 Please format with a format software for SD memory cards Note3 The SD access lamp turns on while acccessing the SD memory card Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 3 GTO2L 6 3 1 General Specifications GTO2L Rated voltage Operating voltage range Power consumption Ambient temperature Ambient humidity Storage temperature Storage humidity Between power su I terminals and Between power Supply terminals and case Insulation resistance 100 MQ or more 500 V DC measured with megohmmeter at default setting 5 to 8 4 Hz half amplitude 3 5 mm Vibration resistance 8 4 to 150 Hz acceleration 9 8 m s 10 sweeps each in X Y and Z directions 1 octave min Shock resistance 147 m s 3 times on 3 axes EC Directive applicable EN61131 2 EMC Directive 1000 V P P or more Pulse width 50 ns 1us between power supply terminals based on in house measurements IP65 Initial value evaluated by us Protective construction Dustproof and drip proof from front panel only packing used on panel contact surface N 9 No
158. tch Lamp Message Data Bar graph Clock Note2 3 Line graph Alarm list Alarm history Keyboard Custom message lamp switch Main functions X 4 Recipe Flow display Write device Multi language exchange Through function Connecting a computer to TOOL port and our PLC to COM port enables the communication between the PLC and the computer Copy function 5 The screen data can be copied by connecting the main units with a cable GTWIN ver Ver 2 60 or later Note1 Maximum allowable number varies depending on registered contents Note2 A clock part can be indicated by referring to external clock data Note3 Accuracy of the GT internal clock is 100 seconds per month Note4 It depends on the version of GT Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 5 4 Interface Specifications GT11 Interface for connecting PLC External devices COM port tm O trae moana AIGT2130B AIGT2130H AIGT2132B AIGT2132H Non insulation type Non insulation type Communication condition with Data length bit external Parity Nore Odd Even gence Transmission distance Max 15 m Max 500 m MEWTOCOL Protocol for PANASONIC PLC FP series General purpose serial PANASONIC dedicated protocol Other companies PLC protocols For the details refer to the latest GTWIN HELP Note1 The and terminals are the power supply term
159. te1 When supplying the power from the TOOL port of a PLC CPU unit comfirm the PLC restrictions such as the power supply capacity before use Note2 When using our exclusive cable Note3 When reattaching replace waterproof packing Noise immunity Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 3 2 Performance Specifications GTO2L Item Specifications Display device STN monochrome LCD Resolution 160 W x 64 H dots Displayable 88 0 W x 35 2 H mm area Display Backlight LED bakclight white Backlight brightness can be adjusted on the menu screen or GTWIN Backlight brightness configuration settings o l l l There are some minor variations in the backlight brightness Contrast Contrast can be adjusted on the menu screen Touch switch Analog touch switch resistive film type Touch F switches peace 0 8 N or less Life 1 million times or more at 25 C N Screen data base keyboard login Flow display data FP monitor screen data 640 kbytes Recipe data 64 k bytes Write device data 64 kbytes Memory F ROM Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 6 3 3 Function Specifications GTO2L Item Specification
160. ter library Lamp 1 00 or later 2 60 or later Message 1 00 or later 2 60 or later Data 1 00 or later 2 60 or later Bar graph 1 00 or later 2 60 or later Clock 1 00 or later 2 60 or later Line graph 1 00 or later 2 60 or later Alam History 1 00 or later 2 60 or later List 1 00 or later 2 60 or later Keyboard 1 00 or later 2 60 or later Custom 1 00 or later 2 60 or later Other Recipe Recipe 1 00 or later 2 60 or later functions SD recipe Not available Not available Flow display 1 00 or later 2 60 or later Write device 1 00 or later 2 60 or later Sound Not available Not available Password 1 00 or later 2 60 or later Password Operation security Not available Not available Multi language exchange 1 00 or later 2 60 or later Logging function Not available Not available Display panel sideways setting 1 00 or later 2 60 or later Copy Cable between GTs 1 20 or later SD memory card Not available Not available GT link Not available Not available PLC multiple connection Not available Not available Note1 Summer time cannot be set xiv Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Version of GT12 and available functions Function GT12M1 GT12M0 GTWIN GT12G1 GT12G0 Parts Switch 1 00 or later 1 00 or later 2 97 or later library Lamp 1 00 or later 1 00 or later 2 97 or later
161. the rear of the main unit to ON and reset the power supply NOTE When doing this all of the contents will revert to those in effect at the time of shipping and all of the GT memory contents will be cleared Before doing this make sure all data has been backed up Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 2 What to DO If Something Unusual Occurs GT02 GT02L GT05 GT12 GT32 GT32 E Problem Cause Solution Screen is blank 1 Power is not on 1 Supply the power supply to unit as per specifications 2 When only lamp and message parts are configured to the base screen Value of substitute reference device value does not exist in substitute data 2 Check the address of the substitute reference device and the device values on the PLC side Error code ER appears at the top right of the screen An error has occurred in communication between the GT and an external device e g PLC Refer to lt Troubleshooting Error Codes gt Screen displays No Screen data There is no base screen data in the GT Appears even when GT configuration data exists Transfer base screen data from GTWIN Screen displays Screen No Error 1 Screen settings from the PLC the GT s switch part or the auto paging indicate an unregistered screen number 1 Create and register screen content or specify the correct screen number
162. tiautomation net 6 3 4 Interface Specifications GTO2L Interface for connecting PLC External devices COM port Specifications fen RS232C type RS422 RS485 type Conforms to RS232C Non insulation type Communication standard Conforms to RS422 Non insulation type Communication Baud rate bit s 9600 19200 38400 57600 115200 bps condition with Data length bit 7 8 external Parity None Odd Even devices Stop bit bit 1 Max 15 m Baud rate 19200 bit s Transmission distance Max 500 m Total length Baud rate 115200 bit s Terminal resistance value 120 Q Protocol MEWTOCOL Protocol for PANASONIC PLC FP series General purpose serial PANASONIC dedicated protocol Protocol for other companies PLCs For the details refer to the latest GTWIN HELP Connector Connector terminal base 8 pin N 2 3 Note1 The and terminals are the power supply terminals for driving the main unit Note2 Regarding power supply voltage please pay due consideration to the cable length so that the applied voltage is within the operation voltage range Note3 When tightening the terminal block requiers a flat blade screwdriver with a blade size of 0 4 x 2 5 or special screwdriver part No AFP0806 Set the tightening torque between 0 22 Nm to 0 25 Nm Size Nominal cross sectional area AWG 28 to 16 0 08 to 1 25mm Applicable wire
163. tion cable is disconnected Check the wiring of the connection cable and check for disconnection 2 It is a temporary error caused by noise etc Turn on the power supplies for PLC or GT again Time up error ERFF There is no response from the PLC Data error ER10 A data error occurred Check for errors in the communication conditions settings during communication Overrun error ER12 The GT cannot receive PLC runaway might be the problem data PLC error ER61 A NAK error has been Verify the PLC settings returned from the PLC For GT02 GT02L GT05 GT12 GT32 and GT32 E Code No Content Cause and solution NAK error ERFFFE A NAK error has been Verify the PLC settings returned from the PLC Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 3 5 When Connected to a PLC Made by Omron Corporation For GT01 GT11 and GT21 area is wrong Code No Content Cause and solution i 1 PLC connection cable is disconnected Check the wiring of Time up error the connection cable and check for disconnection EROO There is no response 2 It is a temporary error caused by noise etc Turn on the from the PLC power supplies for PLC or GT again Cannot be executed due to operation mode ER01 The PLC received the Change the mode of the PLC from the operation mode to the command that cannot monitor mode
164. tion on the ambient temperature The pin 5 of GT01 is N C 2 3 2 USB Port USB connection Communication with our software such as GTWIN becomes available by connecting to a PC with a USB cable Functions enabled by USB connection e Through function using our PLCs e Screen transfer The communication in a speed approximately 3 times of the one with the Ethernet connection is possible Personal computer a pee Screen transfer Through function ne Note If more than one programmable display unit or AE20 are connected to a PC using the USB port the communication is not available Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 2 3 3 Ethernet Port Ethernet connection GT32T1 has a Ethernet port Communication with our software such as GTWIN becomes available by connecting to a PC with a LAN cable Ethernet communication function e Screen transfer Baud rate fixed at 115200 bps It takes at least 3 times longer than the transfer using USB Personal computer GT32T1 Screen data being 1 sent and received LAN cable Screen creation tool GTWIN e Through function using our PLCs Personal computer GT32T1 LAN cable FP series programming tool PLC debugging FPWIN GR Cable connected to the COM port Specifying the destinations to connect enables the communication with multiple units using a HUB GT32T1 Personal computer GT32T1
165. tive circuit e In order to protect the unit against abnormal voltage from the power supply line the power supply should be an insulated type and should be enclosed within a protective circuit e If a power supply device without an internal protective circuit is being used power should always be supplied to the GT series through a fuse or a similar protective device Keep the power supply voltage within the operating voltage range Rated voltage Operating voltage range 5VDC 4 5 to 5 5 VDC 24 V DC 21 6 to 26 4 V DC Keep the power supply wiring separate e Wiring to the GT series PLC and other power equipment should have separate wiring systems s ike T Power or equipment Insulated DC power supply Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 3 2 2 Grounding Be sure to ground when the influence of noise is great The unit is tolerant against noise in normal environments but if the environment is particularly susceptible to noise please ground Use dedicated grounding e For grounding purposes use wires with a minimum of 2 mm The grounding connection should have a resistance of less than 100 Q e Make the grounding point as close as possible to the GT and keep the distance of the grounding wire short e Sharing the ground with another device may have an adverse effect Therefore be sure that grounding is dedicated O Allowed x N
166. uch switch Analog touch switch resistive film type Touch Touch switch 0 8 N or less switches operation Life 1 million times or more at 25 C N Connecting a computer to Ethernet port or USB port and our PLC to Through function COM port enables the communication between the PLC and the computer Screen data base keyboard Screen data base keyboard login Flow display data login Flow display data FP Sound function FP monitor F ROM monitor screen data 2048 kbytes screen data 12288 kbytes Note5 Memory Recipe data 64 k bytes Write device data 64 kbytes Alarm history Line graph sampling 27 5 kbytes Logging data of Logging function 64 kbytes Hold GT Device 2048 255 words Hold PLC Device 24 words Built in clock data Alarm history data Line graph sampling data Eatery Backup Logging data of Logging function Internal device hold data Hold PLC Device data SRAM Note2 Life Approx 5 years at 25 C Approx 3 years at 25 C Note1 The touch position may shift due to aging variation If the touch position has shifted greatly please adjust it Note2 A battery is necessary for SRAM backup The unused part of 27 kbytes for Alarm history and line graph sampling can be used for the logging function Note3 Please purchase a battery separately The battery life is the value when no power at all is supplied The actual lifetime may be shorter according to the condit
167. uderiaedrs 6 38 Chapter 7 Dimensions and Other Documentation ccccseeeeeeeeeeeeeees 7 1 TA DIMONSIONS 23 occ sisc E E E E E A E E 7 2 oN AEG TONG TOU Reto a aaa ae aa EA ARA AE AA E a 7 2 TA 2 OTOZ Rr a ret E A A E 7 3 TAS C84 Wer ere eer ere pre er EE E Rr eee ere 7 4 PNAS TOD iiantt EEEE eet tended ee Anat hee At ee Lol ea cae Laika ch a saa S 7 5 yee ots A EE A cee ere pret ee errr Cheese ree rrr rer cert ere cerry A OA 7 6 Gen oye Wiel AE cere erere Peer cere E er crec epee EAA ere errr rere 7 7 Tele PONZ irre ee ee reer pr ee er rrr recs ere errr ener cece eerie onic eeroreree mererc terres irene ever cee 7 8 PNG e ECHES PAE ENE AETA EET aan ee te Rta cet A ale SOR cae Acie cet Re eth 7 9 rO GTS 25 et A AAE A er Uk oe Sa RL te IN ye tee See Ae saa 7 10 1 2 Cable Specifications 2 A bc r aaa aaae ae aaea ie ae a aa Se a daa eaan saara aay 7 11 VAE ERRA VAE E E AE E E E E E E E ET 7 11 T2 Z PIGT B12 y araa eei a a aea aaas te Seiad A aA EaR AA ean AE ee 7 11 7 2 3 AIGTS162Z AIGTB165 AIGT 8160 orriei aana aneen a a EREE dena sevens 7 11 IV Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net PLAPICT SVD hinati raana aaa inaa tolaisiactenastd Heaniete 7 12 TDS AIRB te PAE sci ted seaksdat ccelanta A E ig bese Phage uaed pea teeatadtids laneegtheceeaees 7 12 7 3 Table of Screen MeSSaQeS cccescccsseeesseeeeeneesseaeeeseeeeneeeeseaeseseaesseeeeeeeeseseaeseseaeeneneeesaes 7 13 7
168. ure black AIG32TQ14D GT32T1 dots Ethernet port RS422 with SD memory RS485 card slot with so dio tp t Silver AIG32TQ15D jack Tet RS232C AIG32MQ03DE monochro GT32M E me LCD Chien 320x240 RS422 dots USB port dessin RS485 AIG32MQ05DE GT32 E pekee LED REN Silver 4096 compliant hite DC color with SD memory M RS232C AIG32TQ03DE GT32T E Ud card slot RS422 320x240 AIG32TQO5DE dots RS485 1 2 2 Options and Repair Parts PLC connecting cables Item name Contents Product No For connection between GT01 GT02 GTO2L 5V en _ DC type RS232C and our FP series TOOL port 2m AIGT8142 Mini DIN 5 pin loose wire cable A ferrite core is supplied with the main unit For connection between GT01 GT02 GTO2L 5V 2 DC type RS422 and MITSUBISHI FX series i TOOL port 2m AIGT8152 Mini DIN 8 pin loose wire cable A ferrite core is supplied with the main unit For connection between 24V DC type RS232C 2m _ AIGT8162 Gom and our FP series TOOL port 5m AIGT8165 Mini DIN 5 pin loose wire cable 10m AIGT8160 __ For connection between 24V DC type RS422 pe lt and MITSUBISHI FX series TOOL port 5m AIGT8175 Mini DIN 8 pin loose wire cable For connection to COM port of FP2 FP2SH and ll FP2 computer communication unit 2m AIP81842 D SUB 9 pin loose wire cable Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Maintenance parts
169. urred during 2 There is an error in the CPU unit Re supply power to the PLC communication and GT Format error The PLC has been ERO041 sent a command that doesn t match the protocol NOT support error The GT has sent a ER0042 non supported command to the 1 There is a temporary error due to noise etc Re supply power to the PLC and GT 2 There is an error in the CPU unit Re supply power to the PLC and GT 1 There is a temporary error due to noise etc Re supply power to the PLC and GT 2 There is an error in the CPU unit Re supply power to the PLC PLC and GT BUSY error The PLC is A large amount of data is being communicated with another ER0053 currently RS232C port on the PLC processing another Wait until the error is gone command ER0060 Parameter errror The specified parameter does not exist or it cannot be used Data run error A register or relay number which doesn t exist in the PLC was ER0061 There is an error in specified during screen creation using GTWIN the register or Correct the output device being used with the part or the transfer relay number of clock data to an external device Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 3 4 When Connected to a PLC FX Series Made by Mitsubishi Electric Corporation For GT01 GT11 and GT21 Code No Content Cause and solution 1 PLC connec
170. utomation net Code No Content Cause and solution SD memorycard Data cannot be written as the memory of the SD memory card 1002 y has been exhausted Delete some data in the SD memory card memory full or prepare a new SD memory card SDimemorycard The data in the SD memory card cannot be read 1003 y Check whether the saved data in the SD memory card is not reading error damaged with a PC a SD memory card The file name to be saved to the SD memory card from the GT 1005 ue saved file name error is not specified properly Specify the file name properly 1006 SD memory card The SD memory card cannot be recognized recognition error Check the SD memory card used 1020 PLC model unmatch Check if the PLC program for transfer matches the destination error PLC 1021 PLC model The selected PLC model is not supported Confirm the PLC unsupported error model 1 Incorrect passwords were input three times or more Input the correct password after turning the power supply off and then Password protection on again 1022 error 2 The upload protection has been set for the PLC 3 The number of digits was changed when setting a new password with the FP monitor function Cancel the password setting first to change the number of digits Mastermeinid A master memory is installed in the PLC FP X Programs 1023 F y cannot be transferred to the PLC with the master memor
171. x 888 723 4773 Web www ctiautomation net Email info ctiautomation net Ver 2 B1 GT01 Ver 1 39 Bug fixing GT02 Ver 1 11 GTO2L Ver 1 01 GT05 Ver 1 71 GT11 Ver 1 29 GT12 Ver 1 41 GT21 Ver 1 19 GT32 Ver 1 81 Ver 2 CO GT02 Ver 1 30 New model GT32 E GTO2L Ver 1 20 FP monitor function GT05 Ver 1 90 Added the mode to ignore CS RS when using general GT12 Ver 1 60 purpose serial communication GT32 Ver 2 00 Fixed font conversion function GT32 E Ver 1 00 Ver 2 C1 GT02 Ver 1 40 Vertical type display GT05 GT32 GT32 E GTO2L Ver 1 30 Device change function GT05 Ver 2 00 Added the SD memory card installation flag in Basic GT12 Ver 1 70 Communication Area GT32 Ver 2 10 Added parts library GT32 E Ver 1 10 XX Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Chapter 1 Features and Functions Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 1 1 Features and Functions of GT Series Can be installed in a small space As the GT series is a small and thin shaped body it can be installed in a small space Also as the projecting part from a wall surface is 4 mm it looks neat after installation The GT01 GT02 GTO2L GT11 GT12 and GT21 can be installed in vertical orientation Number of colors can be selected as usage GT series Number of colors GT21C 256 colors GT
172. y 163 2 Mounting panel Unit mm GT32T0 111 9 Display 163 2 Unit mm GT32T1 84 2 Display 1288 142 0 111 9 Display 163 2 Installation dimensions SD memory card Cable Stereo mini plug A Panel cutout dimensions 150 5 4 Applicable panel thickness 1 0 to 5 0 mm Unit mm Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 1 9 GT32 E When the panel thickness is 5mm 163 2 CBr 128 8 142 0 57 4 Display _ 116 2 Display Unit mm Installation dimensions connector Panel cutout dimensions 150 5 Applicable panel thickness 1 0 to 5 0 mm 119 03 Unit mm Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 7 2 Cable Specifications 7 2 1 AIGT8142 Ferrite accessories Unit mm Signals on mini DIN plug side PLC side 2000 Signal Name Wire Color 7 2 2 AIGT8152 Ferrite accessories Unit mm Signals on mini DIN plug side PLC side 2000 Signal Name Wire Color Green Yellow Brown Orange White PL sida Display side Mitsubishi GT series NIOJ BA OUN Electric made k DC FX series RS422 RS485 7 2 3 AIGT8162 AIGT8165 AIGT8160 Signals on
173. y AIP81842 GT series Usable models PLC PLC communication cable Programmable display FP2 Multi l Communication l 5VDC RS422 Communication block Loose wire cable 24V DC RS485 type Unit FP2 CB485 yP Connecting to the FP2 Multi Communication Unit MCU Communication block RS485 FP2 CB485 1 1 communication To power GT side 24V DC RS422 485 supply tt PLC side Short Pin name _Signal circuit 54321 Short circuit PLC multiple communication Te poer GT side 24V DC RS422 485 44 PLC side Terminal unit PLC side General unit Pinname Sga Shor Short circuit GT side General unit GT side Terminal unit GT Link Function To power 24V DC RS422 485 To power 24V DC RS422 485 supply supply tt ti Pin name Signal PLC side Short circuit 1 2 3 4 5 IEF ner Note Check the usable GT models for 1 N communication Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 4 4 7 Precautions When Communicating With RS485 When communication with the RS485 the transmission line for sending and receiving data is the same GT side Connected device side C Time taken until the connected device sends a response after sending a command from the GT If a response is sent too quickly the GT may not be able to receive it Adjust the time if necessary For our FP series FP or FP X the
174. y for saving screen data may be damaged Please contact us Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net 5 3 3 When Connected to a FP Series PLC Error codes which are sent from the PLC are listed in the table below For details refer to the table of MEWTOCOL COM communication errors in PLC user s manuals For GT01 GT11 and GT21 Code No Content Cause and solution Data error 1 There is an error in the communication condition settings Check A data error the PLC and GT baud rate and transfer format ER21 occurred during 2 There is a temporary error due to noise etc Re supply power to communication the PLC and GT Overrun error The CPU unit s reception buffer is overflowing ER22 The PLC isn t There could be an error in the PLC receiving data Re supply power to the PLC and GT BCC error 1 There is a temporary error due to noise etc ER40 A data error Re supply power to the PLC and GT occurred during 2 There is an error in the CPU unit Re supply power to the PLC communication and GT Format error The PLC has been 1 There is a temporary error due to noise etc Re supply power to the PLC and GT ER41 sent a command f 3 i 2 There is an error in the CPU unit Re supply power to the PLC that doesn t match and GT the protocol NOT SHPperLe ier 1 There is a temporary error due to noise etc The GT has se
175. y from installation error a SD memory card 1025 General purpose General purpose memory shortage in the destination PLC memory shortage 1027 Ramote made sror The PLC FP2 FP2SH is set to the RUN mode Change to the REMOTE mode or PROG mode Pr A Check if a device that cannot be forcibly operated in the PROG 102D Forced operation error mode has been forcibly turned on or off 4040 A SD memory card is not inserted Check the SD memory card slot 1044 Data cannot be written into the SD memory card Check whether The record area for the SD memory card is not write protected logging was As the memory of the SD memory card has been exhausted 1042 overwritten Delete some data in the SD memory card or prepare a new SD memory card mA The setting to stop writing to SD memory card has been set 1044 pe Cancel the writing stop setting ee SD memory card The setting to stop writing to SD memory card has been set 1043 a Pe gt writing error Cancel the writing stop setting The record area for 1045 logging cannot be Transfer all data reserved in the SRAM Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net Code No Content Cause and solution Index register value The device value for index modifier is out of the setting range cue error Check the setting value 4080 Start time device The value at the start of the line graph function is out of t
176. ype to USB for using a USB cable Screen is blank power supply and substitution settings noted above do not apply An incorrect screen is displayed error codes and erroneous date and time items noted above do not apply Switch doesn t work grid and validity settings noted above are correct Buzzer sounds continuously An error has occurred in the GT system 1 After confirming the safety of the device etc turn off the power supply and then turn it on again The GT CPU will be reset Vv 2 If 1 produces no change bring up the system menu and initialize the memory F ROM then transfer data again from GTWIN to the GT NOTE When doing this all base screen data GT setting data keyboard screen data and bitmap data will be lost Before doing this make sure all data has been backed up 3 If 2 produces no change set the operating mode setting switches 2 3 and 4 on the rear of the main unit to ON and reset the power supply NOTE When doing this all of the contents will revert to those in effect at the time of shipping and all of the GT memory contents will be cleared Before doing this make sure all data has been backed up No sound is output 1 The speaker is not connected 1 Connect an audio output equipment speaker with a built in 3 5 mini plug amplifier 2 The setting for using sound is not on 2 Set the sound setting of the GTWIN configuration

Panasonic GT Series Programmable Display User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents