Expansion Slot
Contents
1. 7 Disconnect the DC2 5M DB9F cable from the KVM unit and PC Now the KVM unit should be running on the new firmware The FW version can be seen on the bottom right corner of the PORT NAME OSD window 24 6 Technical Specification Model No KVM 0831 KVM 1631 dia E O RR PC Port Connector All Female Types VGA HDDB 15pin USB Keyboard USB Type A USB Mouse USB Type A VGA HDDB 15pin Remote Console ACC 1000 KVM Cats Console module Optional Expansion Slot Daisy Chain Port Connector VGA HDDB 15pin All Female Type Peene 8 To mo KVM Switch Power DC 12V 1 0A Adapter Local Console Port All Female Types Operation Temperature 0 50 Storage Temperature 20 60 C Humidity 0 95 Non Condensing Weight kg 2 0kg 2 3kg 4451 X 1600W X45 H Cascading 1 KVM 0831 7 KVM 1631 together 25 l Troubleshooting Ensure that all cables are well seated Label all of cables with the number for each respective computer to avoid confusion Don t press any key on the keyboard while the selected computer is booting up Otherwise it might cause the keyboard error or keyboard is not detected at PC side If the keyboard or mouse does not work when connected to the KVM switch please make sure the keyboard or mouse works when directly plug into the computer If the problem persists please try another keyboard or mouse If the mouse doesn t work in Auto Scan mode you can press any key on the keyboard or th2. 2101 ACC 2102 ACC 2103 E The Rear Side of PC a For PS 2 computers Plug the PS 2 connector into the PS 2 mouse use the USB to PS2 adaptor to convert the USB connector into PS 2 interface then connect it to the keyboard port of PC b For USB computers Plug the USB connector into the USB port of PC and no need to connect the PS 2 connector to the PC Step 6 Double Check Double check all of the connections You can check the color of keyboard and mouse connector to make sure the keyboard and mouse connectors are plugged to the correct ports Step 7 Power On Attach the power supply to the KVM unit and plug the other end into a receptacle The Port 1 LED will be lit up and you will hear a beep Please switch on your monitor Note Please remember to plug the power adapter Although the PCs connected to KVM Switch are able to support enough power to the stand alone switch KVM switch still needs a power adapter for daisy chain more banks Unexpected status may occur If you try to daisy chain more KVM switches without plugging the power adapter 3 Operation The power on state of KVM 0831 1631 When you power on the KVM switch it will prompt a login window for key in USER NAME and PASSWORD For more details please refer to OSD section The push buttons 1 8 To switch from one to another port please press the push button for the destination port on the front panel For 16 ports KVM switch please press shif
3. 8 Port Combo KVM Switel ar 1na VM Switch This KVM switch has three 7 segment LEDs to indicate which bank and port is selected The first digit of 7 segment LED indicate the bank you selected and the last two digits indicate which port you select on this bank ON LINE LED indication When the host PC is powered on the ON LINE LED Blue color of corresponding port will be lit in solid blue If the PC is powered off or PC port is empty the power LED won t be lit The BANK button If you want to view the KVM switch on next bank please press BANK button The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1 Bank 1 Bank 2 Bank 37 MAX BANK Push Buttons 1 8 To switch from one to another port please press the push button for the destination port on the front panel SHIFT Button For 16 ports KVM switch please press SHIFT button 9 16 LED on and individual button 1 8 simultaneously in order to select the port 9 to port 16 For example Pressing SHIFT button and button 5 simultaneously the thirteen PC port select LED is selected Note ON LINE status may still lit on after PC Server shut down when USB KB Mouse connected to PC ports It s because the USB port is powered continuously by PC Server motherboards even it shut down already Rear Panel KVM 0831 KVM 1631 P42 PETI PCIO es o EEB r mma mo am
4. Switch Remote Console Optional Module ACC 1000 Extending your PC console up to 300 meters away 1 Make sure that the Cat 5 cable is straight through type 2 Plug one end of Cat 5 cable into the remote console port of KVM switch and the other end of Cat 5 cable into the RJ 45 port of KVM 9007 Cat 5 receiver 3 Connect keyboard mouse and monitor to the Keyboard Mouse port and Monitor port of KVM 9007 4 Connect Local PC to KVM 9007 by using the HDDB 15 to the VGA PS 2 USB cable ACC 1000 KVM 9007 NOTE 1 Local console and Remote console of the KVM switch have the same priority to control computers connected to the KVM switch The display output is the same at the local and remote console monitors The priority mechanism is the first move port has the priority and will release the priority if it did not keep input for 2 seconds If the video signal is foggy or un cleared on the screen please check if the VGA connector For the best display result it is highly recommended to use Cat 6 cable when the connection distance is longer than 150 meters oN Step 5 PC Port Connection The PC port connector is HDDB 15 pin type Plug the HDDB 15 end of the KVM cable HDDB 15 to VGA PS 2 USB type into PC port on the rear of KVM switch unit ACC 2101 ACC 2102 ACC 2103 E The Rear Side of PC a For PS 2 computers Plug the PS 2 connector into the PS 2 mouse use the USB to PS2 adaptor to convert the U
5. overlay window 1 Activate OSD by press Hotkey press Hotkey twice then press Space bar 2 Activate OSD by Mouse Press and hold the left button of the mouse and hit the Esc key to show the Status screen Press and hold the right button of the mouse and hit the Esc key to bring up the Main Menu please enter next key in 2 seconds in the Hotkey sequence please enter next key in 2 seconds in the Hotkey sequence OSD Menu OSD Menu provides a menu driven interface to control the KVM switch This OSD Menu has four types of display screens 1 Login Window When powering on this KVM switch it will prompt a login window and ask for user name and password This KVM system can setup one SUPERVISOR and eight USERs SUPERVISOR can access to all OSD functions USER can access to PORT NAME and PORT SEARCH only 2 Status screen after the log in the Status screen will show up to display the current port settings and Hotkey type 3 Port Name this menu displays port status and you can switch to other port right here 4 Main Menu there are eight menus to operate They are listed as below MAN MENO Function Login Window Power on local console monitor and power on the KVM Switch by plug in the power adapter the Login window will show up waiting for user name and password The Login The default is SUPERVISOR and default user name is eight zeros 00000000 The default password i
6. the Status window E Switch to the selected port Select the port press Enter to switch USER There are two types of user levels SUPERVISOR and USER The default is 18 SUPERVISOR SUPERVISOR can setup and change the OSD settings at Main Menu USER can only do the port switch and port search SCAN TIME This is the time interval for auto scan function When auto scan function is activated the KVM switch will auto scan the host port one by one in the interval as setting Notice that the port without connecting to a computer server will be skipped over on the scan The numeric keypad is not supported while in OSD screen the arrow keys PgUp PgDn and Enter keys are supported Main Menu There are eight menus to choose from LANGUAGE LANGUAGE 0 1 N GL I 8 The OSD supports eight languages English French German Italian Spanish Simplified Chinese Japanese and Russian The default language is ENGLISH Moving the cursor by keyboard Up Arrow key for the Down Arrow key amp or mouse to select the language you like PORT NAME EDIT POO OR TON A MOE ST Ss TEM 0 The first line bar is Bank number following lines are port name list Use keyboard Up Arrow key tt Down Arrow key Y or mouse to select the port After select the port you can either press the Enter Key or move the cursor to port name and double click left button of mouse to switch the port immediately Press
7. 31 8 16 Port Combo KVM Switch w Expansion Slot User Manual Ver 1 2 0706 Safety FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received It s including interference that may Cause undesired operation CE This equipment is in compliance with the requirements of the following regulations EN 55 022 CLASS B Table of Contents E INTRODUCCION lt a 1 ES NS nn O RA a 2 PACKAGE CONTENTS A ie 2 OPTION AILG ABLES Co MODULE a A E T A A A A SO 3 SISTE MRE QUIE MEN ENON TE A A E E A E NENEA EE E E RAT 3 PRONT PANE Daae TE AEEA ONE TE NE NE OOE I TOE TEE A E UOO 4 RLAR PANE e a daa 5 E PIN O E 6 2 HARDWARE INSTALLATION 0 cccceccececeececeececeececeececeececeeceneeseees T SP RACK MOUNT NO A e GR O eo Macaca a ich 7 STEPS LOCAL EON OE EEA EE A dio 7 SEP SUS IB EV BOA RID arni E E N O 7 SOLER USD MOUSE lt a SS bi aa a abi 8 Remote Console Optional Module ACC 1000 errar rara errtama 8 STEPS PC PORTE CONNECTION aaa ai dl nl a o a il Rd 9 STEP O DOUBLE CHECK ica 9 DPB NL AA A a RR O tat RO ROL E E a A RD a aa RO ade 9 3 OPERAHON ainia cai 10 4 DAISY CHAIN CONNECTION 0 cccccececeececeececeececeececeececeececeneeceeeees 11 OPERATE AND DISPLAY stance aros ence 12 DISPEA E AMEE sucata o nee a ete a A
8. CONNECTION ccccccceceececeeeeceneeceneeceneeceneeceuceceeeees 11 OPERATE AND DISPLAY ss asas saciar 12 MS PES EA AMEE tE A Mere gee ace Ahn aaa ees Dac acs ane Shes E A oie A A a a ELE a a 12 de ON SCREEN DISPLAY arene denia 13 A E tdesdet sen nascia aca anta nda nana 13 OSO Men asia sioaizis viu nic sda ada a a abe siso Disse isso eben sida iss asa ala sai 16 EOI VVINGOW assan na eta 17 POT tt da ea ps neh ab ala A A but ahaa ater aad ad 18 IN TAIN EN O PR EET 19 LANGUAGE canal ted 20 PORTNAME ED ca en ene Den tte ena erg oar tee Re o IER eae te ee RE A a an 20 E OR AS ECAR E cy AA ED RDI DEST a ONS REST Te RESID DR eT A NN 21 USE OE COIR AAA Co RUE RU a nd 21 ACCESO LISO nte en en e e o DA O a e leal 22 ge Oe e cath QUERER etre ES AGIR GR PA IR Aer emma OD OGRO RIOS A AO A O O RO RR RO EUR ET 22 PV SE PINGS rs pa aeons tebe eo equa eee 23 OSD MOUSE aaa 23 FIRMWARE OP GRADE aclaracion 24 6 TECHNICAL SPECIFICATION coa 25 t gt TROUBLESHOO TIN Giran 26 1 Introduction Thank you for purchasing LevelOne KVM 0831 1631 Combo KVM Switch The KVM Switches offer the most reliable and efficient way of managing multiple computers in server rooms where space is at a premium On Screen Display OSD features computer naming computer selection status indication auto scan and much more Up to 128 servers can be easily managed by cascading multiple KVM switches to expand the capacity Revolutionized video enhancement technol
9. D lt y OREEE LevelOne KVM 0831 KVM 1631 8 16 Port Combo KVM Switch w Expansion Slot User Manual Ver 1 2 0706 Safety FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received It s including interference that may Cause undesired operation CE This equipment is in compliance with the requirements of the following regulations EN 55 022 CLASS B Table of Contents E INTRODUCTION card 1 A ATURES OR 2 PACKAGE CONTEN Tucasa A aid 2 OPTION AIG ABLES SOM ODE ae oak A SELO A AA SOR 3 SYS PEM REQUIREMENT DNNE EEEE ON N E E AN E N NEA EE E E RAT 3 PRONT PANE Daaa EnO OE O E TE EA NEE EI TOE TE A E OON 4 PRE AR PANEL E E EE iaa 5 ESPA ONO ER EEE A SE E EN ENE A O E N A EE N E E EN Cy E E EE 6 2 HARDWARE INSTALLATION 2 cccccceececeececeneeceneeceneeceneeceaceneeeeaes T STEP RACK MOUNTINO ans Sa DO O ae ete ae can ae dde eh 7 STEP Z LOCAL CONSOLE trni td dio 7 STEP SUS IB REBOTA ei 7 STEP USD MOUSE lt a A E A bi 8 Remote Console Optional Module ACC 1000 errar renan 8 STEPS PC PORT CONNECTION inion reali es a a e cia a abadia cd 9 STEP O DOUBLE CHECK si minis ati N is io Sais E O outa O E ni o lis da Ce Ema 9 NN AA atas a uid neta Rd Ra Masts E RO A A ade 9 3 OPERATION iia 10 4 DAISY CHAIN
10. DR TRE ee ES RE A a Peo A a a E a a 12 de ON SCREEN DISPLAY ita 13 OKOV xira so E soon anos oUEn asc aadUn Ecos GUUa R E E E pac aguia mac canas 13 OSO Me Uat 16 EOI VIA dO netas O a tine 17 AAA O Rd A 18 AS SN 19 LANGUAGE 0carnicaconicanitalnitalitalcaicalonica licencia nica c nicas 20 ROB BUY AV hy ety EDI cate Dente a sen o o Ro Ra RI eras ere ares 20 E OR AS E ANO A RED DES ED O EY DD OTD Te E 21 USER SEC UR ORE ee 21 ACCESO LIS See ene ee ei dial 22 TY QUERER E E E ER PAGOS GER AGIR E OR A AGORA AGO A GO O AI O A A E EST 22 PV SE PING rs aretes gua a 23 OSD MOUSE manada de ne a SS Aa 23 FIRMWARE UPGRADE sit aera ered eet ee ee eee eg ert 24 6 TECHNICAL SPECIFICATION cocoa 25 gt TROUBLESHOOTING saia asi dad Saida 26 1 Introduction Thank you for purchasing LevelOne KVM 0831 1631 Combo KVM Switch The KVM Switches offer the most reliable and efficient way of managing multiple computers in server rooms where space is at a premium On Screen Display OSD features computer naming computer selection status indication auto scan and much more Up to 128 servers can be easily managed by cascading multiple KVM switches to expand the capacity Revolutionized video enhancement technology ensures superb quality up to 1920 x 1440 KVM 0831 1631 supports host PC with PS 2 and USB interface The convenient HDDB 15 to VGA PS 2 USB cable allows user to connect to different kinds of PC interfaces by the same cable Users no lo
11. EARCH POO RTS ER Va Search the computer by port name Enter will show the all the port names USER SECURITY ME 0 0 O DO DO O ODO ODO O 0 O O D 0 0 ODO 1 E E E 5 E There are two types of user levels SUPERVISOR and USER There is one SUPERVISOR and up to eight USERS can be configured Press the Enter key or right button of mouse for editing The left top S means SUPERVISOR and 1 2 3 8 mean USERS The maximum length of NAME and PASSWORD is eight characters A Z and 0 9 21 ACCESS LIST AC css aa Only SUPERVISOR can configure the ACCESS LIST The first column is the port number following the server computer name list The last 8 columns are the access right of each user Use the Enter key or left button of mouse to active deactivate the access right of each port X means to disable access and O means to enable access HOTKEY DO LX So cr S L o c k some keyboard may not equip with all the special keys Make sure the key you select is available in your keyboard 22 TIME SETTINGS ToT MES ET 0 VV When the Auto Scan function is activated the KVM switch will auto scan the host ports one by one in the interval as setting Notice that the port without connecting to a computer server will be skipped over on the scan The interval range is 5 99 seconds and the default interval is 10 seconds Press Enter key to save the SCAN TIME setting O
12. NE A ra l S BANK SHIFT A 1631 IGP Combo mech an Combo KVM Sun Bank2 Slave 1 2 3 O LLL ee ON LINE KVM 1631 16 Part Combo KWM Swich After press BANK button to switch to BANK2 the following diagram shows the BANK2 Port is in control right now and SELECT button is switching between PCs Servers within BANK2 Bank1 Master 00 16 09 16 mo 07 MS oF oF w SELECT pu qu ON LINE a ee i y di f 14 BANK HI 1 KVM 1631 f mbo RV IA Swich COG Bank2 Slave F K A 1 e 3 ii n 0 0 u g 00 DT 08 SELECT E i ON LINE Ens E E SER E gt ti F SNE SHIFT KVM 1631 16 Parnt Combo KWM Switch 5 On Screen Display User can control the KVM switch by three ways front panel Control Buttons OSD On Screen Display or Hot key commands through the Console keyboard It takes approximately 1 2 seconds for the video signal to refresh after switching computers Re synchronization of the mouse and keyboard signals also occurs This is normal operation and ensures that proper synchronization is established between the Console and the connected computers Hotkey You can conveniently command KVM switch through a simple hot key sequence To send commands to KVM switch you must press the hotkey default Caps Lock twice within 2 seconds You will hear a beep sound confirming entering Hotkey mode If you do not press any key during Hotkey mode over 2 seconds the Hotkey mode will be escaped and back to
13. Normal state The default hotkey is Caps Lock but you can change hotkey as your application convenience If you prefer to use other hotkey please go to OSD menu and change the default hotkey to the other Note OSD accepts capital letters only Uppercase cms o mimo O The first digit is bank number starting with 1 The KVM switch on the 1 2 8 bank Daisy chain line is on bank 1 the Master A standalone KVM switch also 01 02 32 port on bank 1 The second amp third digits are port number starting with 01 Next bank Turn beep sound on off To enable disable the Screen Saving function and 10min auto logout function This function is default OFF Disable For SUPERVISOR to set the OSD back to factory default value except User Security settings For SUPERVISOR to activate the Auto Scan function For SUPERVISOR to turn Security function on off If the Security is off we 13 To log out the OSD If Security is enabled it will show up the Login window waiting for username and password If Security is disabled it will show up the Status window don t need user name amp password to access to the KVM system The security function is default OFF Disable 14 Example 1 To bring up the OSD overlay window press Caps Lock Caps Lock and the Space Bar Immediately the OSD overlay screen will appear The Superimposed menu screen is generated by the KVM switch and does not affect y
14. PgUp key or PgDn key for selecting the previous or next Bank Press Enter key to change the port name Press Esc key to cancel the editing without any change or press Enter key to complete the editing 20 PORT SEARCH POO RTS ER Va Search the computer by port name Enter will show the all the port names USER SECURITY ME 0 0 O DO DO O ODO ODO O 0 O O D 0 0 ODO 1 E E E 5 E There are two types of user levels SUPERVISOR and USER There is one SUPERVISOR and up to eight USERS can be configured Press the Enter key or right button of mouse for editing The left top S means SUPERVISOR and 1 2 3 8 mean USERS The maximum length of NAME and PASSWORD is eight characters A Z and 0 9 21 ACCESS LIST AC css aa Only SUPERVISOR can configure the ACCESS LIST The first column is the port number following the server computer name list The last 8 columns are the access right of each user Use the Enter key or left button of mouse to active deactivate the access right of each port X means to disable access and O means to enable access HOTKEY HOTKEY A So cr O L o c k some keyboard may not equip with all the special keys Make sure the key you select is available in your keyboard 22 TIME SETTINGS ToT MES ET 0 VV When the Auto Scan function is activated the KVM switch will auto scan the host ports one by one in the interval as setting Notice
15. SB connector into PS 2 interface then connect it to the keyboard port of PC b For USB computers Plug the USB connector into the USB port of PC and no need to connect the PS 2 connector to the PC Step 6 Double Check Double check all of the connections You can check the color of keyboard and mouse connector to make sure the keyboard and mouse connectors are plugged to the correct ports Step 7 Power On Attach the power supply to the KVM unit and plug the other end into a receptacle The Port 1 LED will be lit up and you will hear a beep Please switch on your monitor Note Please remember to plug the power adapter Although the PCs connected to KVM Switch are able to support enough power to the stand alone switch KVM switch still needs a power adapter for daisy chain more banks Unexpected status may occur If you try to daisy chain more KVM switches without plugging the power adapter 3 Operation The power on state of KVM 0831 1631 When you power on the KVM switch it will prompt a login window for key in USER NAME and PASSWORD For more details please refer to OSD section The push buttons 1 8 To switch from one to another port please press the push button for the destination port on the front panel For 16 ports KVM switch please press shift button 9 16 LED on and individual button 1 8 simultaneously in order to select the port 9 to port 16 For example Pressing shift button and button 5 simul
16. SD MOUSE OOS DMO US A F A amp T You can change the moving speed of mouse cursor in this item There are three levels to choose from The fastest moving speed is FAST the second is MIDDLE and the slowest is SLOW Using and Y key on keyboard to move highlight bar to the wished speed Press the Enter key to go into effect 23 FIRMWARE UPGRADE Please follow the following procedures 1 Power off the KVM switch 2 Prepare the DC2 5M DB9F cable plug the DC2 5 end to the KVM switch s phone jack marked Flash and the DB9F end to PC serial DB9 port 3 Power on the KVM unit The KVM unit now will be in Flash mode waiting for firmware download 4 Run Firmware Upgrade Utility exe Pic Firmware Uperade Utility v1 1 CheckPIC a E 5 Click Browse to select the FW upgrade file Please make sure you select the correct FW upgrade file 6 Click Write Flash to start to upgrade The upgrade process takes about 6 seconds then display WRITE OK if complete the upgrade successfully Pic Firmware Uperade Utility v1 1 IF SAM ain upgrade 1 2 HEX Log Corri fi 15200 Interface to TinyBootLoader v1 8 contact claudiu chiculita ugal ro http www etc ugal ro cchiculita software picbootloader htm COM wali PEE Connect COM1 ok Check PIC HEX 6 min old INHASM 16F code ctg total 4298 words _searehing for PIC Found 16F 8764 8774 WRITE DK time 5 875 sec A m
17. TE CEA en iit e PE PC Port Special Cable ACC 2101 ACC 2102 ACC 2103 HDDB 15 pin male to one HDDB 15 pin male one Mini Din 6 pin and one USB special cables Daisy Chain Cable ACC 2109 HDDB15 pin Male to Male Expansion Slot The Expansion Slot extends functionality with optional module add on such as the ACC 1000 KVM Cat 5 Console module which allows IT people to manage the system away from server room for up to 300 meters ACC 1000 KVM Cat 5 Console optional n ACC 1000 KVM Cat 5 Console To be able remote control through Cat 5 Console use requires the standard Cat 5 cable and KVM 9007 KVM Cat 5 Receiver Cable quality can cause image display differently ask your local distributor for help if you experience troubles Cat 5 5E 6 Straight Through UTP STP Cable 8P8C 3 ET _ ta bd F k a uh L J it ru E mA l L T KVM 9007 2 Hardware Installation Before installation please make sure all of peripherals and computers have been turned off This example of installation is based on KVM 0831 and the procedure of KVM 1631 is the same Step 1 Rack Mounting KVM 0831 KVM 1631 can be mounted in a standard 19 inch equipment rack or on a desktop To mount to a rack attach the brackets to the device using the screws provided in the rack mount Kit Ry Step 2 Local Console Connect the monitor to the HDDB 15 female port of th
18. ast two digits indicate which port you select on this bank ON LINE LED indication When the host PC is powered on the ON LINE LED Blue color of corresponding port will be lit in solid blue If the PC is powered off or PC port is empty the power LED won t be lit The BANK button If you want to view the KVM switch on next bank please press BANK button The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1 Bank 1 Bank 2 Bank 37 MAX BANK Push Buttons 1 8 To switch from one to another port please press the push button for the destination port on the front panel SHIFT Button For 16 ports KVM switch please press SHIFT button 9 16 LED on and individual button 1 8 simultaneously in order to select the port 9 to port 16 For example Pressing SHIFT button and button 5 simultaneously the thirteen PC port select LED is selected Note ON LINE status may still lit on after PC Server shut down when USB KB Mouse connected to PC ports It s because the USB port is powered continuously by PC Server motherboards even it shut down already Rear Panel KVM 0831 KVM 1631 E re See GREEN Ooms Ole E L Herta n i E PC15 PC Port Special Cable ACC 2101 ACC 2102 ACC 2103 HDDB15 pin male to one HDDB 15 pin male one Mini Din 6 pin and one USB special cables Daisy Chain Cab
19. cepts capital letters only Uppercase cms o mimo O The first digit is bank number starting with 1 The KVM switch on the 1 2 8 bank Daisy chain line is on bank 1 the Master A standalone KVM switch also 01 02 32 port on bank 1 The second amp third digits are port number starting with 01 Next bank Turn beep sound on off To enable disable the Screen Saving function and 10min auto logout function This function is default OFF Disable For SUPERVISOR to set the OSD back to factory default value except User Security settings For SUPERVISOR to activate the Auto Scan function For SUPERVISOR to turn Security function on off If the Security is off we 13 To log out the OSD If Security is enabled it will show up the Login window waiting for username and password If Security is disabled it will show up the Status window don t need user name amp password to access to the KVM system The security function is default OFF Disable 14 Example 1 To bring up the OSD overlay window press Caps Lock Caps Lock and the Space Bar Immediately the OSD overlay screen will appear The Superimposed menu screen is generated by the KVM switch and does not affect your computers or software function in any way RE Example 2 To switch to Bank 1 Port1 press Caps Lock Caps Lock and 1 0 qo Actually there are two methods to bring up the OSD
20. ch by plug in the power adapter the Login window will show up waiting for user name and password The Login The default is SUPERVISOR and default user name is eight zeros 00000000 The default password is eight zeros 00000000 After login or port switch by panel button OSD or Hotkey the Status screen will show up to display the information of current settings one digit BANK NUMBER two digit PORT NUMBER PORT NAME and current Hotkey settings Pressing any key or moving mouse will let the Status screen disappeared The selected bank The selected port The port name O 1 The Status The selected Auto LOGOUT function In Login window if no input for username and password over 1 minute the screen will disappear Hit any key to bring up the Login window again At normal operation if no input from the console keyboard or mouse over 10 minutes the KVM switch will turn off the screen display and show up Login window asking for user name and password One more minute of keyboard mouse inactivity the monitor will be turned off notice the monitor LED turns from green color to orange color Port Name The first page shows the current port name and the selected port and the operation hint The selected The selected Operation Hint F 1 Go to the Main Menu To log out the OSD If Security is enabled it will show up the Login window waiting for username and password If Security is disabled it will show up
21. e front button on the face plate for returning standard mode and then use the Keyboard or Mouse again If the Mouse is not detected during PC boot up please make sure that the USB mouse works when directly plugged into the computer Please avoid moving the mouse or pressing the mouse buttons when switching ports If you forget the password to access the KVM switch please contact your supplier No video signal is displayed on the remote monitor A Please check if the connectors of VGA cables and Cat 5 cables are loosed or disconnected Notice that the VGA cable must be connected to computer during boot up process B Please check if the power adapter is connected to extender If the video signal is foggy or un cleared on the screen please check if the VGA connector is well connected or the VGA resolution is too high for the length of cable being used If the problem happened at VGA resolution to shorten the Cat 5 cable length or reduce VGA resolution It is highly recommended to use Cat 6 cable when the connection is longer than 150 meters The PS 2 keyboard or PS 2 mouse cable length is 30 meters maximum The USB keyboard or USB mouse cable length is 5 meters maximum V1 0 26
22. e keyboard or mouse works when directly plug into the computer If the problem persists please try another keyboard or mouse If the mouse doesn t work in Auto Scan mode you can press any key on the keyboard or the front button on the face plate for returning standard mode and then use the Keyboard or Mouse again If the Mouse is not detected during PC boot up please make sure that the USB mouse works when directly plugged into the computer Please avoid moving the mouse or pressing the mouse buttons when switching ports lf you forget the password to access the KVM switch please contact your supplier No video signal is displayed on the remote monitor A Please check if the connectors of VGA cables and Cat 5 cables are loosed or disconnected Notice that the VGA cable must be connected to computer during boot up process B Please check if the power adapter is connected to extender If the video signal is foggy or un cleared on the screen please check if the VGA connector is well connected or the VGA resolution is too high for the length of cable being used If the problem happened at VGA resolution to shorten the Cat 5 cable length or reduce VGA resolution It is highly recommended to use Cat 6 cable when the connection is longer than 150 meters The PS 2 keyboard or PS 2 mouse cable length is 30 meters maximum The USB keyboard or USB mouse cable length is 5 meters maximum 26 D lt y O HEHE LevelOne KVM 0831 KVM 16
23. e local console ports on the back of the KVM Step 3 USB Keyboard Connect an USB keyboard to the KVM Switch Step 4 USB Mouse Connect an USB mouse to the KVM Switch Remote Console Optional Module ACC 1000 Extending your PC console up to 300 meters away 1 Make sure that the Cat 5 cable is straight through type 2 Plug one end of Cat 5 cable into the remote console port of KVM switch and the other end of Cat 5 cable into the RJ 45 port of KVM 9007 Cat 5 receiver 3 Connect keyboard mouse and monitor to the Keyboard Mouse port and Monitor port of KVM 9007 4 Connect Local PC to KVM 9007 by using the HDDB 15 to the VGA PS 2 USB cable ACC 1000 KVM 9007 NOTE 1 Local console and Remote console of the KVM switch have the same priority to control computers connected to the KVM switch The display output is the same at the local and remote console monitors The priority mechanism is the first move port has the priority and will release the priority if it did not keep input for 2 seconds If the video signal is foggy or un cleared on the screen please check if the VGA connector For the best display result it is highly recommended to use Cat 6 cable when the connection distance is longer than 150 meters oN Step 5 PC Port Connection The PC port connector is HDDB 15 pin type Plug the HDDB 15 end of the KVM cable HDDB 15 to VGA PS 2 USB type into PC port on the rear of KVM switch unit ACC
24. hen connect the daisy chain cable ACC 2109 Use one end of daisy chain cable to connect the chain in of daisy chain ports of bank 1 KVM switch and the other end of daisy chain cable for chain out of daisy chain ports of bank 2 KVM switch Please repeat step A to daisy chain more bank as you want Add the KVM switch one at a time The maximum daisy chain bank is eight levels The bank 1 OSD menu and front panel button will be used to do while KVM system after daisy chain other KVM switch OSD will be disabled If you daisy chain KVM 830 and KVM 1631 please use the 16 port at the bank 1 PCs le PCs Ws E PCs lo PCs do PCs Operate and Display The BANK button If you want to view the KVM switch on next bank please press BANK button The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1 Bank 1 Bank 2 Bank 3 MAX BANK Display Example If multiple KVM switches are cascading user can control all the devices through BANK Master only The following diagram shows the BANK1 Port1 is in control right now and SELECT button is switching between PCs Servers within BANK1 Bank1 Master i TE j as E 1 2 3 08 16 oo o wo 4 of qa SELECT if ON LINE a E KVM 1631 Gan Combo KVM Swich Bank2 Slave 7 La L ANO i ua cs DO pa SELECT ON LINE e Est KVM 1631 16 Pon Combo KWM Swich After press BANK button
25. le ACC 2109 HDDB15 pin Male to Male Expansion Slot The Expansion Slot extends functionality with optional module add on such as the ACC 1000 KVM Cat 5 Console module which allows IT people to manage the system away from server room for up to 300 meters ACC 1000 KVM Cat 5 Console optional m ACC 1000 KVM Cat 5 Console To be able remote control through Cat 5 Console use requires the standard Cat 5 cable and KVM 9007 KVM Cat 5 Receiver Cable quality can cause image display differently ask your local distributor for help if you experience troubles Cat 5 5E 6 Straight Through UTP STP Cable 8P8C EELT A TESEI BSL ae A KVM 9007 2 Hardware Installation Before installation please make sure all of peripherals and computers have been turned off This example of installation is based on KVM 0831 and the procedure of KVM 1631 is the same Step 1 Rack Mounting KVM 0831 KVM 1631 can be mounted in a standard 19 inch equipment rack or on a desktop To mount to a rack attach the brackets to the device using the screws provided in the rack mount Kit Ry Step 2 Local Console Connect the monitor to the HDDB 15 female port of the local console ports on the back of the KVM Step 3 USB Keyboard Connect an USB keyboard to the KVM Switch gt o reter off De gt PA off coe gt ef ey Oe PA D Step 4 USB Mouse Connect an USB mouse to the KVM
26. mode for monitoring PCs and flexible scan time from 5 99 seconds LED display for easy status monitoring Buzzer sound for switching port confirmation Built in one daisy chain port for cascading up to 8 KVM 0831 KVM 1631 Provides one expansion slot and can be used for KVM Cat 5 Console or future extension functionality Package Content KVM 0831 KVM 1631 Power Adapter DC12V 1 0A Rack Mount Kit Rubber Feet User Manual Note Use either PS2 or USB port only for the PC port connection on the same PC The optional ACC 1000 KVM Cat 5 Console expansion module allows user control the KVM 0831 KVM 1631 remotely through standard Cat 5 cable for up to 300 meters The KVM 9007 Cat 5 Receiver is required for the Cat 5 remote control it is highly recommended to use Cat 5e cable when the connection is shorter than 150 meters and to use Cat 6 cable when the connection is between 150 and 300 meters Optional Cables amp Module All cables and modules are optional please contact your local distributor for more information ACC 1000 KVM Cat 5 Console Module ACC 2101 1 to 3 1 8m cable for PS 2 and USB port Connection Diagram ACC 1000 KVM 9007 System Requirement Model No KVM 0831 KVM 1631 Local Console Ue VGA Monitor side One USB Keyboard One USB Mouse Computersid HDDB 15 pin male to HDDB 15 pin Mini P Din 6 pin USB special cables Front Panel KVM 0831 ON LINE d KvM 0831
27. ne expansion slot and can be used for KVM Cat 5 Console or future extension functionality Package Content KVM 0831 KVM 1631 Power Adapter DC12V 1 0A Rack Mount Kit Rubber Feet User Manual Note Use either PS2 or USB port only for the PC port connection on the same PC The optional ACC 1000 KVM Cat 5 Console expansion module allows user control the KVM 0831 KVM 1631 remotely through standard Cat 5 cable for up to 300 meters The KVM 9007 Cat 5 Receiver is required for the Cat 5 remote control it is highly recommended to use Cat 5e cable when the connection is shorter than 150 meters and to use Cat 6 cable when the connection is between 150 and 300 meters Optional Cables amp Module All cables and modules are optional please contact your local distributor for more information ACC 1000 KVM Cat 5 Console Module ACC 2101 1 to 3 1 8m cable for PS 2 and USB port Connection Diagram ACC 1000 KVM 9007 System Requirement Model No KVM 0831 KVM 1631 Local Console Ue VGA Monitor side One USB Keyboard One USB Mouse Computersid HDDB 15 pin male to HDDB 15 pin Mini P Din 6 pin USB special cables Front Panel KVM 0831 ON LINE d KvM 0831 8 Port Combo KVM Switel a 1an VM Switch 7 Segment BANK LED indication This KVM switch has three 7 segment LEDs to indicate which bank and port is selected The first digit of 7 segment LED indicate the bank you selected and the l
28. nger need to prepare two kinds of cables for their PCs or servers with different kinds of interfaces Users can save their time and cost when building their system Besides the USB console port KVM 0831 1631 support an optional module which provide Cat 5 remote console for users to access KVM switch remotely with the KVM 9007 Cat 5 Receiver After making connection between KVM switch and Cat 5 receiver by Cat 5 5e 6 cable users can control their system remotely and the distance can be up to 300 meters Users can use their existing LAN cables to do the remote control this also saves their cost and reduce the complexity Some server room environments are too noisy for people or unsuitable to work there for a long time this remote control feature is an ideal solution for these situations KVM 0831 KVM 1631 Key Features 8 16 ports Combo KVM switch with 19 rack mounted design Combo interface with PS 2 and USB PC supports Supports DOS Win98SE 2000 XP Netware Unix Linux Mac Sun Microsystems High VGA resolution up to 1920X1440 bandwidth 200MHz Easy PC selection via On Screen Display Menu Push buttons Hot keys Support password protection and search PC server name Auto scan mode for monitoring PCs and flexible scan time from 5 99 seconds LED display for easy status monitoring Buzzer sound for switching port confirmation Built in one daisy chain port for cascading up to 8 KVM 0831 KVM 1631 Provides o
29. ogy ensures superb quality up to 1920 x 1440 KVM 0831 1631 supports host PC with PS 2 and USB interface The convenient HDDB 15 to VGA PS 2 USB cable allows user to connect to different kinds of PC interfaces by the same cable Users no longer need to prepare two kinds of cables for their PCs or servers with different kinds of interfaces Users can save their time and cost when building their system Besides the USB console port KVM 0831 1631 support an optional module which provide Cat 5 remote console for users to access KVM switch remotely with the KVM 9007 Cat 5 Receiver After making connection between KVM switch and Cat 5 receiver by Cat 5 5e 6 cable users can control their system remotely and the distance can be up to 300 meters Users can use their existing LAN cables to do the remote control this also saves their cost and reduce the complexity Some server room environments are too noisy for people or unsuitable to work there for a long time this remote control feature is an ideal solution for these situations KVM 0831 KVM 1631 Key Features 8 16 ports Combo KVM switch with 19 rack mounted design Combo interface with PS 2 and USB PC supports Supports DOS Win98SE 2000 XP Netware Unix Linux Mac Sun Microsystems High VGA resolution up to 1920X1440 bandwidth 200MHz Easy PC selection via On Screen Display Menu Push buttons Hot keys Support password protection and search PC server name Auto scan
30. our computers or software function in any way RE Example 2 To switch to Bank 1 Port1 press Caps Lock Caps Lock and 1 0 qo Actually there are two methods to bring up the OSD overlay window please enter next key in 2 seconds in the Hotkey sequence please enter next key in 2 seconds in the Hotkey sequence 1 Activate OSD by press Hotkey press Hotkey twice then press Space bar 2 Activate OSD by Mouse Press and hold the left button of the mouse and hit the Esc key to show the Status screen Press and hold the right button of the mouse and hit the Esc key to bring up the Main Menu OSD Menu OSD Menu provides a menu driven interface to control the KVM switch This OSD Menu has four types of display screens 1 Login Window When powering on this KVM switch it will prompt a login window and ask for user name and password This KVM system can setup one SUPERVISOR and eight USERs SUPERVISOR can access to all OSD functions USER can access to PORT NAME and PORT SEARCH only 2 Status screen after the log in the Status screen will show up to display the current port settings and Hotkey type 3 Port Name this menu displays port status and you can switch to other port right here 4 Main Menu there are eight menus to operate They are listed as below MAN MENO Function Login Window Power on local console monitor and power on the KVM Swit
31. s eight zeros 00000000 After login or port switch by panel button OSD or Hotkey the Status screen will show up to display the information of current settings one digit BANK NUMBER two digit PORT NUMBER PORT NAME and current Hotkey settings Pressing any key or moving mouse will let the Status screen disappeared The selected bank The selected port The port name O 1 The Status The selected Auto LOGOUT function In Login window if no input for username and password over 1 minute the screen will disappear Hit any key to bring up the Login window again At normal operation if no input from the console keyboard or mouse over 10 minutes the KVM switch will turn off the screen display and show up Login window asking for user name and password One more minute of keyboard mouse inactivity the monitor will be turned off notice the monitor LED turns from green color to orange color Port Name The first page shows the current port name and the selected port and the operation hint The selected The selected Operation Hint F 1 Go to the Main Menu To log out the OSD If Security is enabled it will show up the Login window waiting for username and password If Security is disabled it will show up the Status window E Switch to the selected port Select the port press Enter to switch USER There are two types of user levels SUPERVISOR and USER The default is 18 SUPERVISOR SUPERVISOR can se
32. t button 9 16 LED on and individual button 1 8 simultaneously in order to select the port 9 to port 16 For example Pressing shift button and button 5 simultaneously the thirteen PC port select LED is selected ON LINE LED indication When the host PC is powered on the ON LINE LED of corresponding port will be lit in solid blue If the PC is powered off or PC port is empty the power LED won t be lit The BANK button If you want to view the KVM switch on next bank please press BANK button The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1 Bank 1 Bank 2 Bank 37 MAX BANK 7 Segment BANK LED indication BBB This KVM switch has three 7 segment LEDs to indicate which bank and port is selected The first digit of 7 segment LED indicate the bank you selected and the last two digits indicate which port you select on this bank Keyboard Hot Key Commands You can switch between the banks or ports through simple hot key The default hot key is pressing the CAPS LOCK key twice within 2 seconds and the user could change hot key as your convenient application If you prefer to use a different hot key you change the default hot key in the OSD menu Refer to the Hotkey section for more information 4 Daisy Chain Connection Note 1 2 Make sure that power to all the devices you will be connecting up have been turn off Yo
33. ta software picbootloader htm COM wali PEE Connect COM1 ok CheckPIC HEX 6 min old INHASM 16Fcode ctg total 4298 words mator PIC Found 16F 8764 8774 WRITE OK time 5 875 sec m 7 Disconnect the DC2 5M DB9F cable from the KVM unit and PC Now the KVM unit should be running on the new firmware The FW version can be seen on the bottom right corner of the PORT NAME OSD window 24 6 Technical Specification Model No KVM 0831 KVM 1631 dia E O RR PC Port Connector All Female Types VGA HDDB 15pin USB Keyboard USB Type A USB Mouse USB Type A VGA HDDB 15pin Remote Console ACC 1000 KVM Cats Console module Optional Expansion Slot Daisy Chain Port Connector VGA HDDB 15pin All Female Type Peene 8 To mo KVM Switch Power DC 12V 1 0A Adapter Local Console Port All Female Types Operation Temperature 0 50 Storage Temperature 20 60 C Humidity 0 95 Non Condensing Weight kg 2 0kg 2 3kg 4451 X 1600W X45 H Cascading 1 KVM 0831 7 KVM 1631 together 25 l V1 0 Troubleshooting Ensure that all cables are well seated Label all of cables with the number for each respective computer to avoid confusion Don t press any key on the keyboard while the selected computer is booting up Otherwise it might cause the keyboard error or keyboard is not detected at PC side If the keyboard or mouse does not work when connected to the KVM switch please make sure th
34. taneously the thirteen PC port select LED is selected ON LINE LED indication When the host PC is powered on the ON LINE LED of corresponding port will be lit in solid blue If the PC is powered off or PC port is empty the power LED won t be lit The BANK button If you want to view the KVM switch on next bank please press BANK button The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1 Bank 1 Bank 2 Bank 37 MAX BANK 7 Segment BANK LED indication Aaa This KVM switch has three 7 segment LEDs to indicate which bank and port is selected The first digit of 7 segment LED indicate the bank you selected and the last two digits indicate which port you select on this bank Keyboard Hot Key Commands You can switch between the banks or ports through simple hot key The default hot key is pressing the CAPS LOCK key twice within 2 seconds and the user could change hot key as your convenient application If you prefer to use a different hot key you change the default hot key in the OSD menu Refer to the Hotkey section for more information 4 Daisy Chain Connection Note 1 2 Make sure that power to all the devices you will be connecting up have been turn off You must unplug the power cords of any computers We do not recommend to cascading different models through the Daisy Chain connection Turn on the KVM switches first t
35. that the port without connecting to a computer server will be skipped over on the scan The interval range is 5 99 seconds and the default interval is 10 seconds Press Enter key to save the SCAN TIME setting OSD MOUSE OOS DMO US A F A amp T You can change the moving speed of mouse cursor in this item There are three levels to choose from The fastest moving speed is FAST the second is MIDDLE and the slowest is SLOW Using and Y key on keyboard to move highlight bar to the wished speed Press the Enter key to go into effect 23 FIRMWARE UPGRADE Please follow the following procedures 1 Power off the KVM switch 2 Prepare the DC2 5M DB9F cable plug the DC2 5 end to the KVM switch s phone jack marked Flash and the DB9F end to PC serial DB9 port 3 Power on the KVM unit The KVM unit now will be in Flash mode waiting for firmware download 4 Run Firmware Upgrade Utility exe Pic Firmware Uperade Utility v1 1 CheckPIC a E 5 Click Browse to select the FW upgrade file Please make sure you select the correct FW upgrade file 6 Click Write Flash to start to upgrade The upgrade process takes about 6 seconds then display WRITE OK if complete the upgrade successfully Pic Firmware Uperade Utility v1 1 IF SAM ain upgrade 1 2 HEX Log Corri fi 15200 Interface to TinyBootLoader v1 8 contact claudiu chiculita ugal ro http www etc ugal ro echiculi
36. to switch to BANK2 the following diagram shows the BANK2 Port is in control right now and SELECT button is switching between PCs Servers within BANK2 Bank1 Master a eo ae 1 sao oA SELECT ON LINE a ee ee ADI outro fo o gt BANK SHIFT KVM 1631 Ibor Cc amio RA Swi Bank2 Slave ry 1 2 3 09 16 7 0 oa wo mn SELECT f i me SS eed l l LA E SHIFT KVM 1631 16 Pon Combo KWM Switch 5 On Screen Display User can control the KVM switch by three ways front panel Control Buttons OSD On Screen Display or Hot key commands through the Console keyboard It takes approximately 1 2 seconds for the video signal to refresh after switching computers Re synchronization of the mouse and keyboard signals also occurs This is normal operation and ensures that proper synchronization is established between the Console and the connected computers Hotkey You can conveniently command KVM switch through a simple hot key sequence To send commands to KVM switch you must press the hotkey default Caps Lock twice within 2 seconds You will hear a beep sound confirming entering Hotkey mode If you do not press any key during Hotkey mode over 2 seconds the Hotkey mode will be escaped and back to Normal state The default hotkey is Caps Lock but you can change hotkey as your application convenience If you prefer to use other hotkey please go to OSD menu and change the default hotkey to the other Note OSD ac
37. tup and change the OSD settings at Main Menu USER can only do the port switch and port search SCAN TIME This is the time interval for auto scan function When auto scan function is activated the KVM switch will auto scan the host port one by one in the interval as setting Notice that the port without connecting to a computer server will be skipped over on the scan The numeric keypad is not supported while in OSD screen the arrow keys PgUp PgDn and Enter keys are supported Main Menu There are eight menus to choose from LANGUAGE LANGUAGE 0 1 N GL I 8 The OSD supports eight languages English French German Italian Spanish Simplified Chinese Japanese and Russian The default language is ENGLISH Moving the cursor by keyboard Up Arrow key for the Down Arrow key amp or mouse to select the language you like PORT NAME EDIT POO OR TON A MOE ST Ss TEM 0 The first line bar is Bank number following lines are port name list Use keyboard Up Arrow key tt Down Arrow key Y or mouse to select the port After select the port you can either press the Enter Key or move the cursor to port name and double click left button of mouse to switch the port immediately Press PgUp key or PgDn key for selecting the previous or next Bank Press Enter key to change the port name Press Esc key to cancel the editing without any change or press Enter key to complete the editing 20 PORT S
38. u must unplug the power cords of any computers We do not recommend to cascading different models through the Daisy Chain connection Turn on the KVM switches first then connect the daisy chain cable ACC 2109 Use one end of daisy chain cable to connect the chain in of daisy chain ports of bank 1 KVM switch and the other end of daisy chain cable for chain out of daisy chain ports of bank 2 KVM switch Please repeat step A to daisy chain more bank as you want Add the KVM switch one at a time The maximum daisy chain bank is eight levels The bank 1 OSD menu and front panel button will be used to do while KVM system after daisy chain other KVM switch OSD will be disabled If you daisy chain KVM 830 and KVM 1631 please use the 16 port at the bank 1 PCs Qe PCs lo de PCs lo PCs de PCs Operate and Display The BANK button If you want to view the KVM switch on next bank please press BANK button The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1 Bank 1 Bank 2 Bank 3 MAX BANK Display Example If multiple KVM switches are cascading user can control all the devices through BANK Master only The following diagram shows the BANK1 Port1 is in control right now and SELECT button is switching between PCs Servers within BANK1 Bank1 Master ota AKVA 1 2 3 09 18 01 of OF H 05 O of 08 SELECT l ON LI
Download Pdf Manuals
Related Search