AEG F 88010 VI Dishwasher User Guide Manual Operating
Contents
1. Lower basket with cutlery basket2 Cutlery basket ATTS ALLE COX 1 If there are cup racks in place on the lefthand side or the cutlery tray is in place remove them 2 If necessary you can remove the cup racks on the lefthand side and or the beer glass holder Downloaded from DishWasher Manual com Manuals Installation Installation instructions Installation AN WARNING Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or competent person Remove all packaging before positioning the machine If possible position the machine next to a water tap and a drain This dishwasher is designed to be fitted under a kitchen counter or work surface Attention Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel No further openings for the venting of the dishwasher are required but only to let the water fill and drain hose and power supply cable pass through The dishwasher incorporates adjustable feet to allow the adjustment of the height During all operations that involve accessibility to internal components the dishwasher has to be unplugged When inserting the machine ensure that the water inlet hose the2. Duration minutes Intermediate rinse Energy kWh B ra A al E T amp Ke e a iz PREWASH Any Partial load 3 x ae to be com pleted later in the day 5 1 The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes 2 During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is The programme duration water and energy consumption levels can vary this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled The temperature of the water is automatically adjusted between 45 C and 70 C 3 Ideal for washing a partially loaded dishwasher This is the perfect daily programme made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery 4 Test programme for test institutes 5 This programme does not require the use of detergent Select and start a washing programme 1 Check that the baskets have been loaded correctly and that the spray arms are free to rotate Check that the water tap is opened Press the ON OFF button Select the washing programme See Washing programmes chart If required postpone the start time of the washing programme Set if required the options Press the OK START button and close th
3. C
4. Allows you to adjust the volume of the acoustic signals from 0 to 5 Level O means the deactivation of the acoustic signals and the corresponding symbol Su ap pears in the display BRIGHTNESS Allows you to increase or decrease the bright ness of the background of the display 10 dif ferent levels can be selected Factory setting level 10 OK START button Press it to e confirm memorize any option e start a washing programme i The OK START and OPTION buttons if pressed simultaneously can e cancel a washing programme in progress e cancel the setting of an option It is also possible to return to the factory setting for the following options LANGUAGE BRIGHTNESS In setting mode press for about 6 seconds these 2 buttons simultaneously the default language message will appear in the display Switching on for the first time setting the language 1 Press the ON OFF button Downloaded from DishWasher Manual com Manuals First use 2 In the display appears the default language message If you want to confirm the default language press OK START 3 If you want to set a different language use the up and down scrolling buttons until the required language appears in the display Press OK START to confirm First use i Before using your dishwasher for the first time e Ensure that the electrical and water connections comply with the installation instructions e Remove all packaging from i
5. Operating instructions Safety information In the interest of your safety and to ensure the correct use before installing and first using the appliance read this user manual carefully including its hints and warnings To avoid unnecessary mistakes and accidents it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyone using it through its life will be properly informed on appliance use and safety Correct use This dishwasher is only intended for washing household utensils suitable for machine washing Do not put any solvents in the dishwasher This could cause an explosion Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket Only use products detergent salt and rinse aid suitable for dishwashers Avoid opening the door whilst the appliance is in operation hot steam may escape Do not take any dishes out of the dishwasher before the end of the dishwashing cycle After use isolate the appliance from the power supply and turn off the water supply This product should be serviced only by an authorised service engineer and only genuine spare parts should be used Under no circumstances should you attempt to repair the machine yourself Repairs c
6. 4 10 7 18 0 7 1 8 il level 2 yes lt 4 Z7 lt 0 7 1 level 1 no The water softener must be set in both ways manually using the water hardness dial and electronically Setting manually i The dishwasher is factory set at position 2 1 Open the dishwasher door 2 Remove the lower basket from the dishwasher 3 Turn the water hardness dial to posi tion 1 or 2 see table 4 Replace the lower basket Setting electronically The dishwasher is factory set at level 5 Enter Option menu SETTINGS WATER HARDNESS Using the up and down scrolling buttons set the level of the water softener ac cording to the hardness of the water in your area see chart Downloaded from DishWasher Manual com Manuals Use of dishwasher salt Use of dishwasher salt AN WARNING Only use salt specifically designed for use in dishwashers All other types of salt not specifically designed for use in a dishwasher especially table salt will damage the water softener Only fill with salt just before starting one of the complete washing programmes This will prevent any grains of salt or salty water which may have been spilt remaining on the bottom of the machine for any period of time which may cause corrosion To fill 1 Open the door remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise 2 Pour 1 litre of water inside the container this is necessary only before fillin
7. rinsing and salt functions They can also contain other different agents depending on which kind of tablets you choose 3 in 1 4in 1 5 in 1 etc Check whether these detergents are suitable for your water hardness See the manufacturers instructions Select the Multi Tab function before the start of a washing programme Once this function is selected it will remain active also for the following washing programmes With the selection of this function the inflow of rinse aid and salt from each re spective supply container is automatically deactivated and also the displayed messages for salt and rinse aid are deactivated With the use of the Multi Tab function the cycle durations may change In this case in the display the indication of the running time of the programme is automatically updated Once the programme is running the Multi Tab function can NO longer be changed If you want to exclude the Multi Tab function you have to cancel the programme setting and then deactivate the Multi Tab function In this case you have to set a washing programme and desired options again i If the drying results are not satisfactory we recommend that you 1 Fill up the rinse aid dispenser with rinse aid 2 Activate the rinse aid dispenser 3 Set the rinse aid dosage to position 2 The activation deactivation of the rinse aid can only be possible with the MULTITAB function active If you decide to turn back to the u
8. 2 Leave the door ajar to prevent the formation of any unpleasant smells 3 Leave the inside of the machine clean Frost precautions Avoid placing the machine ina location where the temperature Is below 0 C If this is unavoidable empty the machine close the appliance door disconnect the water inlet pipe and empty it Moving the machine If you have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water inlet and discharge hoses 4 Pull the machine out together with the hoses Avoid over tilting the machine during transportation What to do if The dishwasher will not start or stops during operation Certain problems are due to the lack of simple maintenance or oversights which can be solved with the help of the indications described in the chart without calling out an engineer Switch off the dishwasher and carry out the following suggested corrective actions i The flashing of the point shaped optical signal on the floor beneath the dishwasher door will not be visible if the appliance has been installed higher up with a furniture door mounted flush Downloaded from DishWasher Manual com Manuals What to do if Display message and malfunction Possible cause and solution e intermitted audible signal e message OPEN THE TAP in the display e point shaped optical signal flashing The dishwasher does not fill with water e intermitted audible signal e mes
9. appliance e Empty the lower basket first and then the upper one this will avoid water drip ping from the upper basket onto the dishes in the lower one e Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes A CAUTION When the washing programme has finished it is recommended that the dishwasher is unplugged and the water tap turned off Downloaded from DishWasher Manual com Manuals Care and cleaning Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time Dirty filters will degrade the washing result AX WARNING Before cleaning the filters ensure that the machine is switched off 1 Open the door remove the lower basket 2 The dishwasher filter system compri ses a coarse filter A a microfilter B and a flat filter Unlock the filter system using the handle on the mi crofilter and remove the filter system 3 Turn the handle about 1 4 a turn an ticlockwise and remove the filter sys tem 4 Take hold of the coarse filter A by the handle with the hole and remove from the microfilter B 5 Clean all filters thoroughly under run ning water Downloaded from DishWasher Manual com Manuals Care and cleaning 6 Remove the flat filter from the base of the washing compartment and clean both faces thoroughly 7 Put the flat filter back in
10. e Older cutlery with glued parts that are not Glazed patterns may fade if machine washed temperature resistant frequently e Bonded cutlery items or dishes e Silver and aluminium parts have a tendency to discolour during washing Residues e g egg white egg yolk and mustard often cause discolouring and staining on silver Therefore always clean left overs from silver e Wooden platters immediately if it is not to be washed straight e Items made from synthetics fibres after use e Pewter or copper items e Lead crystal glass e Steel items prone to rusting Open the door and slide out the baskets to load the dishes Downloaded from DishWasher Manual com Manuals Loading cutlery and dishes The lower basket Load larger and heavily soiled dishes and pans in the lower basket OOo SOO DOO SED is 2Ek Keane T0000 DOOOCOCCOOCSL 0000000000022 To make it easier to load larger dishes all rear ay plate racks in the lower basket can be folded 7 down cm 7 The cutlery basket A WARNING Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery tray or in the upper basket because of the risk of injury Place knives small spoons and small forks in the cutlery tray which is in the upper basket Place forks and spoons t
11. the base of the washing compartment and en sure that it fits perfectly 8 Place the coarse filter A in the mi crofilter B and press together 9 Put the filter combination in place N and lock by turning the handle clock wise to the stop During this process ensure that the flat filter does not protrude above the base of the washing compartment A WARNING NEVER use the dishwasher without filters Incorrect repositioning and fitting of the filters will produce poor washing results and may result in damage to the appliance Cleaning the spray arms i NEVER try to remove the spray arms If residues of soil have clogged the holes in the spray arms remove them with a cocktail stick External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scour ing pads or solvent acetone trichloroethylene etc Internal cleaning Ensure that the seals around the door the detergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend every 3 months to run the wash programme for heavy soiled dishes using detergent but without dishes Downloaded from DishWasher Manual com Manuals What to do if Prolonged periods of non operation If you are not using the machine for any prolonged period of time you are advised to 1 Unplug the appliance and then turn off the water
12. A NIL AS 2 Add the rinse aid in the container The maximum level for filling is indicated by max The dispenser holds about 110 ml of rinse aid which is sufficient for be tween 16 and 40 dishwashing cycles depending upon the dosage setting 3 Ensure that the lid is closed after every refill i Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash The rinse aid container will require topping up periodically You are reminded of this by a displayed message REFILL RINSE AID Downloaded from DishWasher Manual com Manuals Daily use This occurs only at the start and at the end of the washing programme during the running of the programme the indication for rinse aid refilling is not active Adjusting the dosage of rinse aid i According to the finish and drying results obtained adjust the dose of rinse aid by means of the 6 position selector position 1 minimum dosage position 6 maxi mum dosage The dose is factory set in position 4 Increase the dose if there are drops of water or lime spots on the dishes after washing Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades Daily use Check if it s necessary to refill with dishwasher salt or rinse aid e Load cutlery and dishes into the dishwasher Fill with dishwasher detergent e
13. FAVORIT 88010 VI User manual Dishwasher Downloaded from DishWasher Manual com Manuals A i Dear Customer Thank you for choosing one of our high quality products With this appliance you will experience the perfect combination of functional design and cutting edge technology Convince yourself that our appliances are engineered to deliver the best performance and control indeed we are setting the highest standards of excellence In addition to this you find environmental and energy saving aspects as an integral part of our products To ensure optimal and regular performance of your appliance please read this instruction manual carefully It will enable you to navigate all processes perfectly and most efficiently To refer to this manual any time you need to we recommend you to keep it ina safe place And please pass it to any future owner of the appliance We wish you much joy with your new appliance The following symbols are used in this user manual Important information concerning your personal safety and information on how to avoid damaging the appliance General information and tips Environmental information wnloaded from DishWasher Manual com Manuals 117983530 17082007 Contents Contents Operating instructions 5 Safety information 5 Correct use 5 General safety 6 Child safety 6 Installation 6 Product description 7 Control panel 8 Up and down scrolling but
14. Select a wash programme suitable for the cutlery and dishes Start the wash programme Loading cutlery and dishes Sponges household cloths and any object that can absorb water may not be washed in the dishwasher Downloaded from DishWasher Manual com Manuals Loading cutlery and dishes e Before loading the dishes you should Remove all left over food and debris Soften remnants of burnt food in pans e When loading the dishes and cutlery please note Dishes and cutlery must not impede the rotation of the spray arms Load hollow items such as cups glasses pans etc with the opening down wards so that water cannot collect in the container or a deep base Dishes and items of cutlery must not lie inside one another or cover each other To avoid damage to glasses they must not touch Lay small objects in the cutlery basket e Plastic items and pans with non stick coatings have a tendency to retain water drops these items will not dry as well as porcelain and steel items e Light items plastic bowls etc must be loaded in the upper basket and arranged so they do not move For washing in the dishwasher the following cutlery and dishes are not suitable are of limited suitability e Cutlery with wooden horn china or mother Only wash stoneware in the dishwasher if it of pearls handles is specially marked as being dishwasher safe e Plastic items that are not heat resistant by the manufacturer
15. arried out by inexperienced persons will cause injury or serious mal functioning Contact your local Service Force Centre Always insist on genuine spare parts Downloaded from DishWasher Manual com Manuals DAW Safety information General safety e Dishwasher detergents can cause chemical burns to eyes mouth and throat Could endanger life Comply with the safety instructions of the dishwasher de tergent manufacturer e The water in your dishwasher is not for drinking Detergent residues may still be present in your machine e Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded In this way you will avoid anybody tripping over the open door and hurting themselves e Do not sit or stand on the open door Child safety e This appliance is designed to be operated by adults Don t allow children to use the dishwasher unsupervised e Keep all packaging well away from children There is risk of suffocation e Keep all detergents in a safe place out of children s reach e Keep children well away from the dishwasher when the door is open Installation e Check your dishwasher for any transport damage Never connect a damaged machine If your dishwasher is damaged contact your supplier e All packaging must be removed before use e Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person e Forsafety reasons it is da
16. ates that this product may Down tt bs b treated as housel sehold was te Inste ead it should be taken to the appropriate pent anual com Manuals collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product Packaging material The packaging materials are environmentally friendly and can be recycled The plastic components are identified by markings e g gt PE lt gt PS lt etc Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities AN WARNING When a unit is no longer being used e Pull the plug out of the socket e Cut off the cable and plug and dispose of them e Dispose of the door catch This prevents children from trapping themselves inside and endangering their lives Downloaded from DishWasher Manual com Manuals Downloaded from DishWasher Manual com Manuals Downloaded from DishWasher Manual com Manuals www electrolux com Subject to change without notice 117983530 17082007 ownloaded from DishWasher Manual com Manuals J
17. drain hose and the supply cable are not kinked or squashed Fixing to the adjacent units The dishwasher must be secured against tilting Therefore make sure that the counter it is fixed under is suitably secured to a fixed structure adjacent kitchen unites cabinets wall Levelling Good levelling is essential for correct closure and sealing of the door When the appliance is correctly levelled the door will not catch on either side of the cabinet If the door does not close correctly loosen or tighten the adjustable feet until the machine is perfectly level Downloaded from DishWasher Manual com Manuals Water supply connections i Connection to a cold water supply is advised If connection is made to a hot water supply the maximum permissible temperature is 60 C A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot For making the connection itself the coupling nut fitted to the machine s supply hose is designed to screw onto a 3 4 gas thread spout or to a purpose made quick coupling tap such as the Press block The water pressure must be within the limits given in the Technical specifications Your local Water Authority will advise you on the average mains pressure in your area The water inlet hose must not be kinked crushed or entangled when it is being connected The dishwasher features fill and drain hoses which can be turned either to th
18. e A must be removed Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot i Our appliances are supplied with a security device to A protect against the return of dirty water back into the a machine If the spigot of your sink has a no return valve incorporated this can prevent the correct draining of your dishwasher We therefore advise you to remove it Electrical connection AN WARNING Safety standards require the appliance to be earthed Prior to using the appliance for the first time ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed The fuse rating is also to be found on the rating plate Always plug the mains plug into a correctly installed shockproof socket Multi way plugs connectors and extension cables must not be used This could constitute a fire hazard through overheating If necessary have the domestic wiring system socket replaced In case that the electrical cable has to be replaced contact your local Service Force centre The plug must be accessible after the appliance has been installed Never unplug the appliance by pulling on the cable Always pull the plug The manufacturer accepts no liability for failure to observe the above safety pre cautions Environment concerns The symbol on the product or on its packaging indic
19. e door the washing programme will start automatically If the delay start has been set the countdown will start automatically Once the delay start has elapsed the programme will start automatically Noa fF WD The opening of the door will interrupt the countdown Close the door the countdown will continue from the point at which it was interrupted Downloaded from DishWasher Manual com Manuals Select and start a washing programme i Once the washing programme has started a point shaped optical signal appears on the floor beneath the dishwasher door This optical signal will remain illuminated for all the duration of the washing pro gramme If the appliance has been installed higher up with a furniture door mounted flush the optical signal will be no longer visible A WARNING Interrupt or cancel a washing programme in progress ONLY if it s absolutely necessary Attention Hot steam may escape when the door is opened Open the door carefully Cancel a delay start or a washing programme in progress 1 Open the dishwasher door 2 Press simultaneously both OPTION and OK START buttons 3 The message CONFIRM CANCEL is displayed 4 Press OK START button to confirm 5 The appliance returns to setting mode and the message CHOOSE PRO GRAMME is displayed e fa delay start is cancelled also set the washing programme has been cancelled e fanew washing programme is set check that there is detergent in t
20. e left or the right to suit the installation by means of the locknut The locknut must be correctly fitted to avoid water leaks Attention NOT all models of dishwashers have fill and drain hoses provided with locknut In this case this kind of facility is not possible If the machine is connected to new pipes or pipes which have not been used for a long time you should run the water for a few minutes before connecting the inlet hose DO NOT use connection hoses which have previously been used for an old appliance This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system This appliance complies with the applicable plumbing regulations Water inlet hose with safety valve After connecting the double walled water inlet hose the safety valve is next to the tap Therefore the water inlet hose is only under pressure while the water Is running If the water inlet hose starts to leak during this operation the safety valve cuts off the running water Please take care when installing the water inlet hose e The electrical cable for the safety valve is in the double walled water inlet hose Do not immerse the water inlet hose or the safety valve in water Downloaded from DishWasher Manual com Manuals e f water inlet hose or the safety valve is damaged remove the mains plug immediately e A water inlet hose with safety valve must onl
21. ed messages and audible signals will guide you in the setting of the appliance and the selection of a washing programme and options Up and down scrolling buttons These two buttons have a double function e selecting within programme menu e selecting within option menu and submenu Downloaded from DishWasher Manual com Manuals Control panel 9 Display 1 Washing programmes during the progress of the programme these little bars indicate the phase of the washing programme prewash main wash rinses drying 2 In this row several details are displayed Setting mode guide to the selection of the washing programme duration time of the programme options when together with the washing pro gramme one or more options are set the update of the programme duration will occur automatically Once the programme has started indicates the sequence of the running phase and the running time of the programme in progress 3 Symbols indicate the options see chart The symbols have the following meaning amp DELAY START fixed in setting mode flashing when countdown in progress Q MULTITAB illuminated when the MULTITAB function is active XQ SOUND VOLUME exclusion of the volume for vocal messages Except for alarm signals OPTION button Press this button to enter a menu of options press again to exit from the menu Downloaded from DishWasher Manual com Manuals Control panel How to set the o
22. g with salt for the first time 3 Using the funnel provided pour in the salt until the container is full 4 Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket 5 Replace the cap tightly turning it clockwise until it stops with a click i Do not worry if water overflows from the unit when filling with salt this is quite normal The salt container will require topping up periodically You are reminded of this by a displayed message REFILL SALT This occurs only at the start and at the end of the washing programme during the running of the programme the indication for salt refilling is not active i The refilling salt message can remain visible for 2 6 hours after the salt has been replenished assuming the dishwasher remains switched on If you are using salts that take longer to dissolve then this can take longer The function of the machine is not affected Downloaded from DishWasher Manual com Manuals Use of rinse aid Use of rinse aid AN WARNING Only use branded rinse aid for dishwashers Never fill the rinse aid dispenser with any other substances e g dishwasher clean ing agent liquid detergent This would damage the appliance i Rinse aid ensures thorough rinsing and spot and streak free drying Rinse aid is automatically added during the last rinse 1 Open the container by pressing the release button
23. hat do not fit in the cutlery tray in the cutlery basket To ensure that all items of cutlery in the cut lery basket can be reached by the water you should Downloaded from DishWasher Manual com Manuals Loading cutlery and dishes 1 Place the grid insert on the cutlery basket J133 gt Pe aaadi 3 JJ JJ4 aa CEEI anna EEETI agyayitjijjj nunun aJ JJJJJJ CTENERERE wuajsaaaaad wyaweaa20979 2 Place forks and spoon in the cutlery basket with their handles pointing downwards For larger utensils such as whisks leave off one half of the cutlery grid 43N EPEA JUUN agau one wwabeda2279 8 daJtitsjji4 F The cutlery basket can be opened out Always make sure that you put your hand around both parts of the two part handle when removing it from the dishwasher 1 Place the cutlery basket on a table or work surface 2 Open out the two part handle 3 Remove cutlery Downloaded from DishWasher Manual com Manuals Loading cutlery and dishes Beer glasses and champagne glasses Up to 4 wheat beer glasses Pils glasses etc can be hung in the beer glass holders on the lefthand side in the lower basket If necessary the beer glass holders can be fol ded up The beer glass holders can be replaced with 2 cup racks supplied as extras which also serve as champagne glass h
24. he detergent dispenser Interrupt a washing programme in progress e Open the dishwasher door the programme will stop The message PLEASE CLOSE DOOR is displayed e Close the dishwasher door the programme will continue from the point at which it was interrupted End of the washing programme e The dishwasher will automatically stop and an acoustic signal informs you of the end of the washing programme Downloaded from DishWasher Manual com Manuals Unloading the dishwasher e When the programme has ended the optical signal on the floor beneath the dishwasher door will turn off i The dishwasher s drying system is provided with a device that allows air to circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets Once the washing programme has ended this device operates intermittently for other 20 minutes as long as the dishwasher is switched on If the On Off button is pressed or the door is opened during these 20 minutes the device will be automatically cancelled 1 Open the dishwasher door The messages PROGRAMME END alternated with PLEASE SWITCH OFF are displayed 2 Press the On Off button Leave the door ajar and wait a few minutes before removing the dishes in this way they will be cooler and the drying will be improved Unloading the dishwasher e Hot dishes are sensitive to knocks The dishes should therefore be allowed to cool down before removing from the
25. ms Lay or hang wine and brandy glasses in the slots in the cup racks For glasses with long stems fold the glass rack to the right otherwise fold it away to the left AN V4 e The row of spikes on the left of the upper basket is also in two parts and can be folded away Spikes not folded away place glasses Mies mugs etc in the upper basket 1 Cz Spikes folded away more room for serv AIN ing dishes i pa g Adjusting the height of the upper basket Maximum height of the dishes in D the upper basket the lower basket With upper basket raised 22 cm 30 cm Downloaded from DishWasher Manual com Manuals Use of detergent A i Maximum height of the dishes in Ts the upper basket the lower basket With upper basket lowered 24 cm 29 cm The height of the upper basket can also be adjusted when it is loaded Raising lowering the upper basket 1 Pull out the upper basket completely 2 Holding the upper basket by the han dle raise it as far as it will go and then lower it vertically The upper basket will latch into the lower or the upper position WARNING After loading your machine always close the door as an open door can be a hazard Before closing the door ensure that the spray arms can rotate freely Use of detergent i Q Only use detergents specifically designed for use in dishwashe
26. ngerous to alter the specifications or attempt to modify this product in any way e Never use the dishwasher if the electrical supply cable and water hoses are damaged or if the control panel work top or plinth area are damaged such that the inside of the appliance is freely accessible Contact your local Service Force centre in order to avoid hazard e Allsides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components Downloaded from DishWasher Manual com Manuals Product description A WARNING For electrical and water connection carefully follow the instructions given in specific paragraphs Product description fy Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Fal Rating plate Filters FEM Lower spray arm 9 Upper spray arm Downloaded from DishWasher Manual com Manuals HE Control panel i This dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher s door occurs Internal light is equipped with led lamp CLASS 1 in accordance with EN 60825 1 1994 A1 2002 A2 2001 In case that this light has to be replaced please contact your local Service Force Centre Control panel Up and down scrolling buttons Display OK START button On Off button OPTION button A sequence of display
27. nside the appliance e Set the water softener e Pour 1 litre of water inside the salt container and then fill with dishwasher salt e Fill the rinse aid dispenser If you want to use combi detergent tablets such as 3 in 1 4in 1 5 in 1 ete set the Multi tab function see Multi tab function Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply which would have a detrimental or adverse effect on the operation of the appliance The higher the content of these minerals and salts the harder your water is Water hardness is measured in equivalent scales German degrees dH French degrees TH and mmol l millimol per litre international unit for the hardness of water The softener should be adjusted according to the hardness of the water in your area Your local Water Authority can advise you on the hardness of the water in your area Water hardness Adjusting the water hardness Use of salt setting yes 51 70 Sil 12 Si 125 2 level 10 43 50 76 90 73 88 2 level 9 yes Downloaded from DishWasher Manual com Manuals Set the water softener Water hardness Adjusting the water hardness Use of salt setting 37 42 65 75 GSES level 8 29 36 51 64 SEGA 2 level 7 yes 23 28 40 50 4 0 5 0 2 level 6 yes 1902 3339 dial G8 2 level 5 yes 15 18 26 32 2 6 3 2 1 level 4 yes 11 14 19 25 1 9 2 5 1 level 3 yes
28. olders 1 Remove beer glass holders by pulling upwards and pressing lightly on the hooks from below 2 Attach cup racks onto the horizontal bars A or B using the hooks 3 Remove the cup racks in the same way as for the beer glass holders 4 For wheat beer glasses of normal size attach the beer glass holders to hori zontal bar A for mush shorter glasses on B Downloaded from DishWasher Manual com Manuals Loading cutlery and dishes The bars that fix the beer glass holders or cup racks can be removed if required 1 Push the bars back using the thumbs see the picture 2 Fix the bars again by pushing them forwards AN WARNING Important risk of injury do not take hold of the bars with the hand place the hand under the bars on the lower basket for support The upper basket Load smaller fragile crockery and long sharp cutlery in the upper basket ON aAA e Arrange items of crockery on and under the on folding cup racks so that they are offset SAI from each other and water can reach all R H AZ Al items aya A LT TTT SNe l Ke g BN Fe Downloaded from DishWasher Manual com Manuals Loading cutlery and dishes e The cup racks can be folded up out of the way for tall crockery ite
29. ptions Press OPTION button 2 Press one of the up and down scrolling buttons until desired option is dis played DELAY START MULTITAB SETTINGS Press OK START to confirm and enter submenu Press up and down scrolling buttons until required submenu is displayed Press OK START to confirm To exit from the menu press OPTION button on Fw DELAY START Allows the start of the selected washing pro gramme to be delayed for between 1 and 19 hours The countdown will decrease with steps of 1 hour Only in the last hour the decrease is in minutes Once the countdown has elapsed the washing programme will start automatically MULTITAB amp Sets the dishwasher for the use of conventional detergents or combi detergent tablets 3 in 1 4in 1 5 in 1 etc See MULTITAB function ON function activated Use combi detergent tablets The symbol amp appears in the display OFF function deactivated Use conventional detergents SETTINGS LANGUAGE Allows you to view messages in the required language WATER HARDNESS Allows you to set electronically the water softener RINSE AID Allows you to activate or deactivate the rinse aid dispenser ON activated OFF deactivated Downloaded from DishWasher Manual com Manuals Control panel BRIGHTNESS Allows you to increase or decrease the bright ness of the background of the display 10 dif ferent levels can be selected Factory setting level 10 SOUND VOLUME
30. rs Please observe the manufacturer s dosing and storage recommendations as stated on the detergent packaging Using no more than the correct amount of detergent contributes to reducing pol lution Downloaded from DishWasher Manual com Manuals Use of detergent Fill with detergent 1 Open the lid 2 Fill the detergent dispenser 1 with detergent The marking indicates the dosing levels 20 approximately 20 g of detergent 30 approximately 30 g of detergent 3 All programmes with prewash need an additional detergent dose 5 10 g that must be placed in the prewash detergent chamber 2 This detergent will take effect during the prewash phase 4 When using detergent tablets place the tablet in compartment 1 5 Close the lid and press until it locks in place i Detergent tablets Detergent tablets from different manu factures dissolve at different rates For this reason some detergent tablets do not at tain their full cleaning power during short washing programmes Therefore please use long washing programmes when us ing detergent tablets to ensure the complete removal of detergent residuals Downloaded from DishWasher Manual com Manuals Multi Tab function Multi Tab function This appliance is equipped with the Multi Tab function that allows the use of the Multi Tab combi detergent tablets These products are detergents with a combined cleaning
31. s have been carried out switch on the appliance the programme will continue from the point at which it was interrupted Downl ARE CORIHISHAGQtHeHInsRds canpGars contact the Service Force Centre What to do if For other fault codes not described in the above chart please contact your local Service Force Centre quoting the model Mod product number PNC and serial number S N This information can be found on the rating plate located on the side of the dishwasher door So that you always have these numbers at hand we recommend you to make a note of them here Mode oe cee earns eae PNG Meeciate hecee E SiN faa heed a elecass Se dedehawtae 4 The wash results are not satisfactory The dishes are not clean e The wrong washing programme has been se lected e The dishes are arranged in such a way as to stop water reaching all parts of the surface The baskets must not be overloaded e The spray arms do not rotate freely due to ncorrect arrangement of the load e The filters in the base of the washing com partment are dirty or incorrectly positioned e Too little or no detergent has been used e Where there are limescales deposits on the dishes the salt container is empty or the in correct level of the water softener has been Set The drain hose connection is not correct e The salt container cap is not properly closed Rinse aid was not used The rinse aid dispenser is empty The dishes are we
32. sage DRAIN BLOCKED in the display e point shaped optical signal flashing The dishwasher will not drain e intermitted audible signal e Jf appears in the display e point shaped optical signal flashing Anti flood device is activated e intermitted audible signal e message SPRAY ARM BLOCKED in the dis play e point shaped optical signal flashing The programme does not start The water tap is blocked or furred with lime scale Clean the water tap The water tap is turned off Turn the water tap on The filter where present in the threaded hose fitting at the water inlet valve is blocked Clean the filter in the threaded hose The water inlet hose has not been correctly aid or it is bent or squashed Check the water inlet hose connection The sink spigot is blocked Clean out the sink spigot The water drain hose has not been correctly laid or it is bent or squashed Check the water drain hose connection Close the water tap and contact your local Service Force Centre Open the door carefully Arrange dishes and cutlery in the baskets so that the upper spray arm can rotate freely Close the door The dishwasher s door has not been properly closed Close the door The main plug is not plugged in Insert the main plug The fuse has blown out in the household fuse box Replace the fuse Delay start has been set f dishes are to be washed immediately cancel he delay start Once these check
33. se of the standard detergent system we advise that you 1 Deactivate the MULTITAB function 2 Fill up the dispensers for salt and rinse aid again 3 Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes Downloaded from DishWasher Manual com Manuals Washing programmes 4 Adjust the water hardness setting according to the hardness of the water in your area 5 Adjust the rinse aid dosage Washing programmes Programme Degree of Type of Programme description Consumption val soil load ues 1 Z g 2 e a Y S Ss a z e S gt S F z I z oO t a 5 AUTOMATIC2 Mixed nor Crockery e See 1o 2 g mal and cutlery m i a heavy soil pots and S e pans 30 MI Light soil Crockery e e Q aje NUTES and cutlery 70 INTEN Heavy soil Crockery o e 2 al ee SIVE cutlery T AEE pots and Q pans an 65 NORMAL Normal Crockery e eee 2 ajg soil and cutlery m i i a ENERGY Normal Crockery eoe o o o e ajg soil and cutlery F i i o a S B 50 NORMAL Normal Crockery eee o e a S soil and cutlery i i LO B 45 GLASS Normal Delicate e ee o 2 ca j g soil crockery a fee ish and glass Se ware Downloaded from DishWasher Manual com Manuals Select and start a washing programme Programme Degree of Type of Programme description Consumption val soil load ues 1
34. t and dull There are streaks milky spots or a bluish coating Decrease rinse aid dosing on glasses and dishes Water drops have dries onto glasses and dishes Increase rinse aid dosing e The detergent may be the cause Contact the detergent manufacturer s consumer care line If after all these checks the problem persists contact your local Service Force Cen tre Downloaded from DishWasher Manual com Manuals Technical data Technical data Dimension Width height depth cm 59 6 x 81 8 89 8 x 55 5 Electrical connection Voltage Information on the electrical connection is given on the rating Overall power Fuse plate on the inner edge of the dishwasher s door Water supply pressure Minimum Maximum MPa 0 05 0 8 Capacity Place settings 12 Max weight kg 38 Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme see Washing programmes Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme see Washing programmes Full load 12 standard place settings Amount of detergent required 5 g 25 g Type B Rinse aid setting position 4 Type II Downloaded from DishWasher Manual com Manuals Hints for test institutes Example loading arrangements Upper basket 1
35. tons 8 Display 9 OPTION button 9 How to set the options 10 OK START button 11 Switching on for the first time setting the language 11 First use 12 Set the water softener 12 Setting manually 13 Setting electronically 13 Use of dishwasher salt 14 Use of rinse aid 15 Adjusting the dosage of rinse aid 16 Daily use 16 Loading cutlery and dishes 16 The lower basket 18 The cutlery basket 18 Beer glasses and champagne glasses 20 The upper basket 21 Adjusting the height of the upper basket 22 Use of detergent 23 Fill with detergent 24 25 Multi Tab function Ww Contents Washing programmes 26 Select and start a washing programme 27 Cancel a delay start or a washing programme in progress 28 Interrupt a washing programme in progress 28 End of the washing programme 28 Unloading the dishwasher 29 Care and cleaning 30 Cleaning the filters 30 Cleaning the spray arms 31 External cleaning 31 Internal cleaning 31 Prolonged periods of non operation 32 Frost precautions 32 Moving the machine 32 What to do if 32 Technical data 35 Hints for test institutes 35 Installation instructions 37 Installation 37 Fixing to the adjacent units 37 Levelling 37 Water supply connections 38 Water inlet hose with safety valve 38 Water outlet hose connection 39 Electrical connection 40 Environment concerns 40 Packaging material 41 Downloaded from DishWasher Manual com Manuals Safety information
36. y be replaced by a specialist or by the Service Force Centre A WARNING Warning Dangerous voltage Water outlet hose connection The end of the drain hose can be connected in the following ways 1 To the sink outlet spigot securing it to the underside of the work surface This will prevent waste water from the sink running into the machine 2 Toastand pipe provided with vent hole minimum internal diameter 4 cm The waste connection must be at a maximum height of 60 cm from the bottom of the dishwasher The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water The sink plug must not be in place when the ai machine is draining as this could cause the danbo ae water to syphon back into the machine The total length of the drain hose including any extension you might add must be no longer than 4 metres The internal diameter of the extension hose must be no smaller than the diameter of the hose provided Downloaded from DishWasher Manual com Manuals Electrical connection Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided When connecting the drain hose to an under sink trap spigot the entire plastic membran
Download Pdf Manuals
Related Search