USB Isolator USB Isolator Extender User`s Manual
Contents
1. T Installation 7 1 USB Isolator 1 Plug the units molded USB A male cable into the host computer or USB hub 2 The Power LED will light on indicating power is being received from the host and the isolator is ready 3 Plug the downstream device into the unit Type A female connector This USB cable is not included 4 The USB Isolator is transparent to the host operating system and does not require configuration or software installation Note The isolators are USB bus powered When the USB Isolator is connected to a high power USB host port it can provide power current up to 200mA to the attached downstream device 7 2 USB Isolator Extender 7 2 1 Installing the Transmitter Local Unit 1 Plug the units molded USB A male cable into an available USB port of host computer 2 Plug one end of the Cat 5 cable into the Link port RJ 45 on the transmitter Please see Category cable wiring 3 Power LED indicator lights on 7 2 2 Installing the Receiver Remote Unit 1 Plug the other end of the Cat 5 cable into the Link port RJ 45 on the receiver 2 Plug the 5VDC power adapter into the receiver and AC plug into the power receptacle 3 Connect the USB device through USB cable into the USB port of receiver 4 Power LED indicator lights on 7 2 3 Checking the Installation 1 For Windows users 2000 XP Vista 7 8 and 8 1 open Device Manager to confirm the extender has been installed correctly Expand the Entry and2. USB Isolator USB Isolator Extender User s Manual USB IS0101 USB ISO101E USB ISO101 USB ISO101E Table of Contents 1 Introduction 2 Features of USB Isolator 3 Specifications of USB ISOlALO Nasties ie eesucen vec alveteseweveeeenuueabeacidiedatedabstess swansea vecddadauyase eves evauwedeseus 4 Features of USB Isolator Extender 5 Specifications of USB Isolator Extender OSC OMMCC ING sie cctcta in waisen cece nctsinss aa Aaa aAa a 3 7 Installation 8 Category Cable wining sorrara r ar a eae 9 Troubleshooting Regulatory Compliance 1 Introduction USB Isolator protects PC or Laptop while connecting USB peripherals which is wired to high voltage This small industrial grade isolator is very easy to use and provides a high voltage barrier protection against surges noise and ground loop errors It is Suitable for use in sensitive applications like automotive measurements USB isolator provides a high voltage isolation barrier between computer and it s connected USB device The isolation protects equipment from electrical over voltages and transient voltage spikes by eliminating ground loop currents flowing between the PC and USB device which can cause damage and inaccurate measurements Additionally isolation minimizes conducted noise from static discharge magnetic fields and radio frequency interference USB isolator is USB bus powered and can provide 5V 200mA to your USB device with built in isolated DC DC conv
3. check the USB controllers If the extender is installed correctly it should be listed as a Generic USB Hub 2 For Mac OS X users open the System Profiler to confirm that the extender has been installed correctly In the left column under Hardware select USB and check the right panel If the extender has been installed correctly you should find it listed as a Hub under the USB High Speed Bus USB Bus 3 If the extender is not detected correctly or fails to detect go to the page of Troubleshooting 4 The USB Isolator is transparent to the host operating system and does not require configuration or software installation Note The isolators are USB bus powered When the USB Isolator is connected to a high power USB host port it can provide power current up to 200mA to the attached downstream device Additional info The extender complies with USB 1 1 and USB 2 0 specifications governing the design of USB devices However we do not guarantee that all USB devices are compatible with the extender as there are a number of different factors that may impact the operation of USB devices over extended distances 8 Category cable wiring Take precaution selecting the Cat 5 wires before connecting use a cable tester to check the wires are correctly terminated Incorrect Termination may cause damage to the receiver unit Recommend to use T568B wiring as shown below 1 range Lo 2 White and Green m Blue d White an
4. d Blue 5 Green p White and Brown 7 Brown 8 9 Troubleshooting Table 1 provides troubleshooting tips The solutions are arranged in the order in which they should be executed in most situations If you are unable to resolve the problem after following these instructions contact your distributor for further support Table 1 Troubleshooting tips e The USB device requires 1 Install the required USB device driver on the computer The USE device ic drivers that were not installed operating system before plug in the USB device to the e The USB device does not receiver Access your USB device s manufacturer s Web support USB hubs site for detail info e The USB device might be 2 In the Universal Serial Bus USB controllers section of failed Device Manager check if the USB device is listed e An over current condition has 1 Unplug the power adapter from the receiver wait occurred because the USB approximately 30 seconds plug the power adapter into oa device is drew more current than receiver again mere OAVICIS it can be supplied per USB 2 If over current keeps occurring either the USB device may specification 500mA use more power than the USB specification or the USB Operating systems may pop up device may be damaged to indicate an issue 3 Consult your USB device documentation and plug into your USB device with the required power adapter attached but not functioning attached but not functioning Regulatory Co
5. erter This is possible only when the isolator is connected to a high power USB host port The USB Isolator Extender can help remove the distance barrier between PC and USB enabled peripheral devices which are located at a distance over 50 meters away and protect your PC or Laptop connecting USB peripherals which are wired to high voltages It provides a high voltage isolation barrier between your computer and it s connected USB device The isolation protects the equipment from electrical over voltages and transient voltage spikes It also eliminates ground loop currents flowing between the PC and USB device which can cause damage and inaccurate measurements Additionally isolation minimizes conducted noise from static discharge magnetic fields and radio frequency interference The receiver unit can provide 5V 200mA supplying your USB device with built in isolated DC to DC converter This is possible only when the isolator is connected to a high power USB host port 2 Features of USB Isolator USB isolation 5000V DC between USB host and USB device USB 2 0 compatible 1 5Mbps low speed and 12Mbps full speed Bi directional communication Short circuit protected for x D and x D lines Isolated power supply in device through a DC to DC converter Class 3A contact ESD performance per ANSI ESD STM5 1 2007 High common mode transient immunity gt 25 kV us Supports Windows 98SE ME 2000 XP Vista 7 8 8 1 Mac OS 8 6 or higher no dr
6. iver installation required ad Specifications of USB Isolator Model No Housing Dimension LxWxH 4 Features of USB Isolator Extender Extend USB peripherals up to 100 meters for low speed devices and 50 meters for full soeed devices USB isolation 5000V DC between USB host and USB device USB 2 0 compatible 1 5Mbps low speed and 12Mbps full speed Bi directional communication Short circuit protected for x D and x D lines Isolated power supply in device through a DC to DC converter Class 3A contact ESD performance per ANSI ESD STM5 1 2007 High common mode transient immunity gt 25 kV us Supports Windows 98SE ME 2000 XP Vista 7 8 8 1 Mac OS 8 6 or higher no driver installation required 5 Specifications of USB Isolator Extender Model No USB ISO101E 5000V DC Transmitter amp Receiver Isolation 3000V DC Transfer Rate 1 5 12 Mbps ane USB Type A Male Connec 8P8C RJ 45 Female ea 8P8C RJ 45 Female USB Type A Female 6 Connecting Typical Application 6 1 USB Isolator USB Cable B AM BM USB Device Ee ane PC Power LED Orange Fig 1 The USB Isolator unit is installed in line between the PC and a connected USB device 6 2 USB Isolator Extender Cat 5 Cable 50m Pal USB Cable B AM BM USB Device Cane PC Rx Power LED Orange Tx Power LED Orange Fig 2 The USB Isolator Extender is installed over Cat 5 cable between the PC and a connected USB device
7. liance could void your authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation WEEE Waste of Electrical and Electronic Equipment em Recycling of Electronic Products In 2006 the European Union introduced regulations WEEE for the collection and recycling of all waste electrical and electronic equipment It is no longer allowable to simply throw away electrical and electronic equipment Instead these products must enter the recycling process Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways Please follow your national law when you want to dispose of any electrical or electronic products More details can be obtained from your national WEEE recycling agency cE
8. mpliance Disclaimer Information in this document is subject to change without notice The manufacturer does not make any representations or warranties implied or otherwise regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage including but not limited to special incidental consequential or other damages No part of this document may be reproduced or transmitted in any form by any means electronic or mechanical including photocopying recording or information recording and retrieval systems without the express written permission of the manufacturer All brand names and product names used in this document are trademarks or registered trademarks of their respective holders CE FCC amp Recycling Information CE Certification This equipment complies with the requirements relating to Electromagnetic Compatibility Standards EN55022 EN55024 and the further Standards cited therein It must be used with shielded cables only It has been manufactured under the scope of ROHS compliance FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation You are cautioned that changes or modification not expressly approved by the party responsible for comp
Download Pdf Manuals
Related Search