See here the enhanced user manual - Firebird
Contents
1. PAL amp NTSC The Clarifier must be configured to process NTSC or PAL video formats To output in NTSC for American TV slide the switch located on the OUTPUT panel to the right To output in PAL for European TV slide the switch located on the OUTPUT panel to the left Code Free Multi Region This unit has been modified by us to be multi region friendly and avoid any possible regional encoding issues It will remain transparent to the Code Free 3 Multi Region features of DVD players or recorders and is guaranteed not to interfere with these features Specifications INPUT Formats NTCS3 58 NTSC4 43 PAL PAL M PAL N SECAM auto detection Connectors Composite Video RCA jack x 1 S Video mini DIN x 1 Note input selection switch toggles between composite and s video input source OUTPUT Format NTSC3 58 PAL4 43 Connectors Composite Video RCA jack x 1 S Video mini DIN x 1 POWER DC 7 5V 500mA Troubleshooting Possible Solution Device does not e Press input select switch to toggle between composite and S operate Video inputs e Has correct mode AV Line Tuner etc been set on the VCR or the DVD Correct connecting cable Have the RCA cables been mixed up at the input and output of the VCR DVD No Picture e Is the Power light on If not there is no power e Is the connecting cable of the plug in adapter damaged Picture Rolling e TV does not support 50 60Hz scan rate2. The Clarifier DVS Pro User Manual Package Content This package includes 1 Clarifier model DVS Pro 1 RCA style Video Cable 1 7 5V 500 mA AC adapter and this Instruction Manual Connection The Clarifier should be connected between your playback VCR DVD or camcorder and the recording VCR or DVD as shown below Note Regardless of which input is used both outputs continuously deliver an output signal The unit will automatically detect whether the video input is in NTSC USA or PAL Europe format The output format is determined by the setting of the PAL NTSC output switch See diagram below Playback camcorder VCR or DVD Recording VCR DVD Clarifier Sout Vout NTSC PAL Output Panel Only the video cables are to be connected to the Clarifier Audio cables should be connected directly between the playback and recording units With Hi 8 or S VHS capability connect your S Video cables to the Clarifier Operation _ Connect the Clarifier unit as shown on page 1 2 Select the PAL NTSC output format by setting the PAL NTSC output switch to the desired setting Note The unit will automatically detect whether the input is PAL or NTSC however you must select the desired output format For use on U S televisions VCRs and DVDs set the output format switch to NTSC 3 Select the appropriate input by pressing the Input select switch Green indicator light signifies Composite signal Orange indicator l
3. ight signifies S Video input signal 4 Select the desired video enhancement mode by pressing the Video Enhancement button The button cycles between four enhancement modes as follows gt Normal gt Enhanced gt Darken gt B amp W_ gt _ Pressing the button four times begins the cycle again 5 The LED indicator light shows which input format and Enhancement mode are selected For example a steady green light means you have selected a composite input signal and will output in Normal video mode An orange blinking light indicates an S Video input signal with one of three enhancement modes Use the steady indicator light as a fixed point to determine the desired enhancement mode Review the chart below to determine the correct setting If unsure which video enhancement mode is selected look at your video monitor while logging through the options Input LED Normal Enhancement Darken B amp W Composite Green Green Green Green Green Steady Blinking Blinking Blinking S Video Orange Orange Orange Orange Orange Steady Blinking Blinking Blinking 6 Select A V input on your recording VCR or DVD and press Record 7 Then press PLAY on your playback device Important Notes VHS and DVD media are produced in more then one video format In the United States the NTSC format is used In Europe the PAL format is used The Clarifier automatically detects the input format however you must select the output format
4. s Multi System Though sensitive to PAL and NTSC formats the Eliminator is not a VIDEO CONVERTER and will not perform the following functions 1 Allow you to play a PAL DVD or video tape on NTSC player that does not support multi system and visa versa 2 Allow you to play a PAL DVD or video tape on an NTSC TV that does not support multi system 3 Allow you to copy an NTSC DVD or video tapes to an NTSC DVD recorder or VCR in the PAL format to send overseas unless the recorder supports both formats
Download Pdf Manuals
Related Search