WIRELESS HD VIDEO - CVC Computer Video Communication
Contents
1. EU Environmental Protection Waste electrical pradurcts should not be disposed of with household waste Please recycle where facilities exist Check with you local authiarity or retailer for recycling advice WIRELESS HD VIDEO Transmission Solution Important Information Please read this user manual before you use this prod uct it contains at the notes and i mpor tant things regarding operating this product In accordance with the safety precautions and operating instructions listed on this user manual our applies provided the product is handled properly for its intended use but may not apply to below cases e Repairs or product modificat ion and alterations have been executed by unauthorized personnel e The damages are caused by accidents including but not limited to lightning fire exposed to rain or water and moisture e Do not use provided power adapter with specific power voltage which are not compliant with the rated voltage range in the attached label of the power adapter in package e The model label on the product has been modified or the warranty tag has been removed by unauthorized personnet Safety Precaution To reduce the risks of electricity do not remove or open the cover No user serviceable pa rts are inside Please returnto REE original factory for maintenance High voltage The high temperature in the process of operating the device may cause the high risk of sla Iding Please use our2. product is in stand by status Short press to connect to RX in working status under point to point mode 2 POWER mini B USB mini USB socket for power supplying by USB cable 3 HDMI IN for audio and video input 4 Antenna Area keep free and in 60 degree direction to receiver for best performance OG Wireless HD Receiver Antenna SCAN POWER mini B USB HDMI OUT Antenna Area keep free and in 60 degree direction to transmitter for best performance MH Product Installation Connect the TX RX to the source display with HDMI cable connector connect the TX to available USB outlet for power connect the RXwith adapter and power on the products Indicators of TX amp RX will flash slowly when the products are powered on Indicator will flash slowly when TX is powered on Antenna TX j Lem HD player USB Cable HDMI Cable HDMI b Connectors os 1 SCAN Short press to wake up when product is in stand by status No need to press SCAN key in working status under point to point mode 2 POWER mini B USB mini USB socket for power supplying by USB cable 3 HDMI OUT for audio and video input O7 Indicator will tlash slowly when RX is powered on RX Y USB Cable Projiecter HDMI Cable HDMI Connectors 2 When the products are powered on and indicators of TX amp RX are flashing slowly please press code key of TX for 1 sec and then
3. 0 XGA 1024x768 Audio format F System latency lt 1ms 3 Range 30M LOS MAX F Power consumption 3 3W MAX gt Power supply DC 5V 1A a Protected Overvoltage 6 17V g Operation Temperature 0 60 C i Storage Temperature 20 C 80 Operation Humidity 15 85 Dimension 89 5 34 5 20mm Weight 50g 3g necessary change without notification EEE Trouble Shooting Problem TX or RX is not turned on TX and RX are out of effective range TX and RX 7 Connectio TX and RX are not paired yet nfailure Co Obstacles exsit in the antenna area ie Antenna angle is out of effective range TX and RX No The source is not turned on video The displayer is not turned on output The resolution is not supported PCM AAC Dolby Digital 2 0 5 1 DTS 5 1 LPCM5 1 7 1 We are improving the products continuously hespecification may be upgraded with Power on both TX and RX Approach RX and TX to effected range Power on TX and RX and press code key of TX for 1s keep no obstacle in front of the TX RX antenna at least 2m range Make the TX antenna and RX antenna directly facing to each other Turn on the source Turn on the displayer Change the resolution 10 HS FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This equipment c
4. e do not block or stick anything on the air vent of product do not remove the cover or put the object just li ke pins steel wi re into the gap of the air vent e Please place the rec eiver transmitter on a flat with hard and stable surface e Venti lation please do not block the air vents on the rec eiver transmitt er or place any heavy object on top of them Blocking the air flow can damage the product itself Please make sure that there is adequate vent ilation distance between the receiver and TV and also put the prod uct away from direct sunlight or any source of heat e Water Exposure To reduce the risk of electric shock or fire please do not expose the rece ive r transmitt er to rain or moisture We assume no responsibility for any damage or result caused by using other adapters instead of our standard adapters Special Notice e Although the product has provided the function of data encryption when transmitting you still need to pay attention to deliberate signal interception There will be the possibility of a third party intentionally intercept the transmission signal since the product adopt wireless communication Please do not use the product on c onfident ial and important com munications or life related communications The main concern is that the content of wireless communication might be received by the third party s wireless devices deliberately or acc identally e The impact of rad io waves such as the following
5. environment may cause the abnormal audio and video blocked image noise etc 1 Transmit near che wal which is hard for the radio waves to get chrough 2 Quite close to the refrigerator metal fitmenc and appliances or next to the crowded situation e This product has been tested and manufactured to com ply with national electrical safety rules however there will be noise caused by the interference with other machines in rare cases If the interference is happened please keep the prod uer a certain d istance away from other mach ines e Optimal range between transmitter and receiver is between Imeter to 30 meters within line of sight indoor e Please do not set up the transmitter and receiver in metal shelf or the wireless communications could be shielded 1080P 60Hz wireless transmitting It wi take about 10 seconds to boot the system before wireless communication start the media receiver can not be operated during this time eee ON TENTS CONTENTS Foreword 02 Bren lt necuic tO n 02 Features 02 Revel oe EC a ee ee a 03 Structunecsalntentacewa aaa eee eee 04 Wireless HD Video Transmitter 8 04 Wireless HD Video Receiver _________ 05 Product Installation 2222 22 22 5 255545545 06 Indications SSTA gta putt as erates E ee Se 07 Specinicatio nt S a a ap re ee ie 07 MroublesShoo tinai arrn aa te ees ee 08 H Foreword Please read thi
6. omplies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received includinginterference that may cause undesired operation HE Cautions The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modificationscould void the user authority to operate the equipment 1O
7. release and both indicators will be flashing rapidly which means the pairing process is done Original pack of TX and RX were paired as default set in the factory already and shall disregard current step 3 When the AV source player amp displayer are powered on and the indicators of TX amp RX light on steadily the video output is working normally Note To obtain best performance of range please always keep the antennas surfaces of TX and RX are facing to each other osz BE indicators Model Indicator Indicator Status Working Status 1 No power on or in stand W OFF by status Ae Retort Flash slowly TX and RX are unconnected indicator att Flash rapidly TX and RX are conneccted TX a ON AV is normally transmitted OFF No power on or in stand by status Network Ct Flash slowly TX and RX are unconnected indicator RX atk ON HE Specification 4 A1999 Y4 7JP US ULIL Frequency Modulation mode Wireless standard Frequency Stability Bandwidth Transmission power Antenna gain Antenna Angle Receiving sensitivity Audio and Video interface o9 HRP2 59 40 61 56Ghz 16QAM WirelessHD1 1 10PPM 1 76GHZ HPR 28dbm MAX 18dbi MAX 80 80 72dbm HDMI Ct Flash rapidly TX and RX are conneccted AV is received and output normally FW3060A HRP3 61 56 63 72Ghz FW3060A 2D 480i 480p 576i 576p 720p 1080i 1080p Video resolution 3D 720p 1080p PC VGA 640x480 SVGA 800x60
8. s manual carefully before you use this product and retain it properly for future reference If there is any doubt or difficulty in the process of product usage please feel free to contact us or the dealer The company reserves the authority to amend the specification H Brief Introduction This device is a wireless full HD video streaming system basedon 60GHz solution is featured with uncompressed zero latency and maximum 4Gbps transmission rate Wa Features e Support point to point transmission e Support devices with HDMI output such as Blue Ray Player HD Media Player IPTV PC Laptop and PS3 etc e 60GHz wireless HD video transmission transmitting bit rate up to4Gbps e Real time latency within Ims e Support 3D 720P 1080P e Support HDCP 2 0 e Support digital audio up to 7 1 e Full hardware design plug and play e Maximum range 30m LOS o4 ME Packing List Please check the packing list carefully if any parts is missed please contact your dealer Components of all models are subject to the following packing list Wireless HD Transmitter USB Adapter x1 5V 1A x1 USB Cable x 1 HDMI Cable x 1 180 HDMI Connector x1 Wireless HD Receiver USB Adapter USB Cable x 1 HDMI Cable x 1 x1 5V 1A x1 180 HDMI Connector xP o5 M Structure amp Interface Wireless HD Transmitter Antenna SCAN POWER mini B USB HDMI IN 1 SCAN Short press to wake up when
9. standard power adapter Detailed information Please refer to the rated voltage range showed on the label at the back of package s power adapter Caution Danger Be careful with electricity e As connecting any equipment such as any player or TV etc please turn off the power to the product before any operation is undertaken e Power outlet To prevent electric shock or fire short circuit please make sure the type of electric at plug used on the receiver s and transmitter s power cord are compliant with the rated voltage range in the attached label of the power adapter in package e Power cord Do not place any heavy articles above on the power cord To avoid being stepped on or pinched by heavy items the power cord should not be located on the place where people pass by frequently e Power overload ing Avoid overloading wall s electrical outlets and extension cord or other multi socket otherwise could result in electric shock or fire e Lig htn ing For protection from fig htning or when the product is left unattended for a long period please d isconnect it from the power source e Please d isc onnect the power cord from the power outlet when you are not using the receiver and transmitter this wit reduce the risk of electric shock or _ fire Warning e This product should not be exposed to d ripping or splashing Do not place any object filled with liquid on the product eg vases e To avoid electric shock pleas
Download Pdf Manuals
Related Search