RFID Reader - Samsung CCTV
Contents
1. SAMSUNG TECHWIN RFID Reader User Manual SSA R1101V RFID Reader User Manual Copyright 2010 Samsung Techwin Co Ltd All rights reserved Trademark SAMSUNG TECHWIN g is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice o Warranty If the product does not operate properly in normal conditions please let us know Samsung Techwin will resolve the problem for free of charge The warranty period is 3 years However the followings are excluded e If the system behaves abnormally because you run a program irrelevant to the system operation e Deteriorated performance or natural worn out in process of time Sensory phenomenon that does not affec2. and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for EEE details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system 16_ product specifications SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 40
3. or M3 screws 3 Insert the reader module into the appearance case and tighten the screw M6x8mm using the hex wrench Upper 6 32 hole a 1 7 T T 4 31cm 3 3 O 6 32 or M3 Screws 8 38cm L ee 6 32 hole 1 2 hole SAMSUNG Lower Bezel E T 3mm Hex Wrench L Wall Mount Mullion Mount Gang Box 6 32 or M3 Screws SAMSUNG Reader Ry Module Bezel B T 3mm Hex Wrench Electric Gang Box Mount English 9 NOILIINNOO TVN431X3 ANY NOILVTIVISNI installation and external connection PRECAUTIONS ON INSTALLATION If installing on a metal wall If you install the reader on a metal wall the read range may be reduced To avoid this problem it is recommended to insert the spacer between the metal wall and the reader as shown below a If installing more than one reader side by side or front and back If you install more than one reader side by side or front and back the read range may be reduced In this case if you present a card to one reader the other reader may recognize the same card meaning two readers read the same card simultaneously To avoid this problem keep at least 20 cm of space between the two readers samsung Minimum samsun Reader 1 us Minimum Reader 2 Reader 1 Reader 2 lt Front and Back gt a pa lt Side by Side gt 10_ installation and external connection EXT
4. 0 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Tol Free 1 877 213 1222 FAX 1 310 632 2195 Park Chertsey Surrey UNITED KINGDOM KT16 OPS www samsungcctvusa com TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungsecurity com www samsungtechwin com P No Z8100239401A
5. ERNAL CONNECTION Wiring Diagram SSA R1001V SSA R1101V Buzzer Control In Blue RS 232 TX Brown SAMSUNG LED Control In Yellow Wiegand Data 0 Out Green RS 232 GND Black CONTROLLER wiegand Data 1 Out White Tamper Output COM Pink Tamper Output NC Light yellow Black DC 12V GND POWER Item Cable Wiring Connect the DC 12V to the red line Power Supply Unit Connect GND to the black line Connect the green line of the product to the Wiegand DO input port of the controller Wiegand Connection Connect the white line of the product to the Wiegand D1 input port of the controller LED Control To control the LED indicators connect the yellow line to the output port relay of the controller Buzzer Control To control the built in buzzer connect the blue line to the output port relay of the controller 5 Connect to the COM port of the PC Connect pin 2 of the DB 9 connector to the purple line connect the baconet black line of the device GND to pin 5 of the DB 9 connector Connect the pink line of the product to the GND terminal of the controller Tamper Connection Connect the light yellow wire of the product to the GND terminal of the controller English _ 11 NOILIINNOO TVN431X3 ANY NOILVTIVISNI Initialization BASIC OPERATIONS Initial State when the power is supplied When you apply power to the reader it will s
6. NGOHINI LONGOHd product introduction CABLE COLOR SCHEME Item Cable Color Signal Line Description Red DC 12V DC 12V supplied Power Black GND Earth grounding for power Blue Buzzer Control BUZZER Control Input Port Input Yellow LED Control LED Control Input Port Green Out Wiegand 0 Wiegand Data 0 Output Port Output White Out Wiegand 1 Wiegand Data 1 Output Port Communication Purple RS 232 TX Be u Output Pink Tamper Output COM Tamper Output Port Tamper Light yellow Tamper Output NC Tamper Output Port Gray Not used Brown NC Not Connected Orange CABLE SELECTION Item Cable Type 1 Power pei2v Belden 9409 18 AWG 2 Conductor Unshielded en Belden 9512 22 AWG 4 Conductor Shielded 2 Buzzer Control LED Control Tamper Output Belden 9514 22 AWG 8 Conductor Shielded 3 RS 232 Cable Belden 9829 24 AWG 2 twisted pair Shielded 8_ product introduction installation and external connection INSTALLATION Inserted in the doorframe attached to the wall 1 Two 6 32 or M3 holes are 3 3 8 38 cm away from each other vertically between the two exists one 1 2 hole through which the reader cables are arranged The midway hole is located 1 7 4 31cm down from the upper hole If the product is already installed you can skip the follow step 2 Insert the reader cables to the midway hole and fix the reader module with two 6 32
7. V R1101V is shock resistant with a high level of weather proofing in any challenging weather conditions The red and green indicators as well as the Piezo buzzer guarantee a stable and proper operation for you 13 56 MHz MIFARE Contactless Smart Card Reader Compatible with ISO14443 Type A 3 Array LED Indicators red and green and Built in Buzzer 34 bit Wiegand RS 232 Data Output Control of External LED Indicators Control of External Buzzer Epoxy adhesion and aluminium case Reverse Polarity Protection Weatherproof and Dustproof WHAT S INCLUDED Check if the following items are included in the product package What s included in SSA R1001V Samsung wh 3 5x40mm screws x2 a READER Module a 3 5x25mm screws x2 Quick Guide CD Manual 6x30mm Plastic Anchor x2 What s included in SSA R1101V 4 3 5x40mm screws x2 SSA R1101V READER Module SMMHex 4 505mm screws 2 Quick Guide CD Manual Bezel Wrench x1 6x30mm Plastic Anchor x2 6_ product introduction AT A GLANCE Front Rear SAMSUNG SSA R1001V 1 LED Displays the system operation status using red and green indicators 2 Buzzer Piezo buzzer 3 Connection Cable Used to connect to the power or 1 0 cable 4 Fixing Hole Fixing hole for wall mounting 5 Tamper Switch A tamper switch to detect falling from the wall English _ 7 NOILO
8. according to the different I O settings of the controller For more information about the I O settings of the controller refer to the user manual of the controller NG Card reading is not available while the buzzer control is sounding the buzzer 12 initialization Output format WIEGAND OUTPUT Timing Diagram 100us Ak ee 5V DATA 0 Ams 0V Data Type e Bit 1 Even Parity bit2 bit17 e Bit2 Bit33 4 byte ID number e Bit34 Odd Parity bit18 bit33 English 13 1VNH04 LNdLNO Output format RS 232 OUTPUT Output Waveform LSB MSB 15V 0 1 0 0 0 0 1 0 Space 0 3V F 4 f f 4 j 5 Indeterminate ov Region Ome a kA MAA NA PA AA Mark 1 er iq uu 8DataBits mu Start Bit 2 Stop Bits it Data packet corresponding to ASCII character A gt Data Type Start 0X02H Data 10 Char End 0x03H LRC START 0X02H DATA 10 Char END 0x03H LRC A Check the following settings Baud Rate 9600bps DataBit 8 Parity None Stop Bit 1 LRC This is the result of XOR operation of each byte from Start to End 14 output format troubleshooting TROUBLESHOOTING If the product does not function properly please see the below for trouble shooting PROBLEM SOLUTION My card is not read properly a N Check the rated voltage specified in the user manual and the catalog Ensu
9. adiation sources It may cause fire 6 Install it in a place with good ventilation 7 Avoid aiming the controller directly towards extremely bright objects such as sun 8 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 9 The Mains plug is used as a disconnect device and shall stay readily operable at any time English _ 3 safety Information FCC Statement Caution Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions any cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particula
10. ound a beep before entering Standby with the red indicator tum on Using the card SAMSUNG Present the card to the reader until you hear a beep and the red indicator turns green When the reader has transferred the data to the controller it returns to Standby with the red indicator turned on and waits for reading the next card LED Control You can control the LED indicator of the device at your preference Connect the LED control input line yellow to the NO port of the controller relay output and GND to the COM port Set the I O of the controller so that you can change the color of the LED indicators While the LED control is working the green indicator stays solid This function not only enables you to change the color representing Standby from red to green but it can be also applied to make various modifications according to the different I O settings of the controller For more information about the I O settings of the controller refer to the user manual of the controller Buzzer Control You can control the buzzer of the device at your preference You can configure the I O settings of the controller so that it sounds a beep While the buzzer control is working the product keeps sounding the beep The controller can use the I O settings to set the buzzer control so that it sounds an additional beep for authorized or unauthorized access upon user authentication Furthermore you can make various modifications
11. r installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions 1 2 3 4 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched par
12. re that you are using an ISO14443 Type A card Cards of 125 kHz format can not be used 13 56 MHz cards of Type B ISO15693 format can not be used Contact the card retailer regarding the card format If the problem persists contact the nearest customer service for your assistance When turn on the product it sounds a beep with dimly turned on indicator Ensure that you are using a larger capacity adaptor than specified in the user manual or the Catalog which should cover the rated current consumption of the reader If you are using multiple readers that are connected to one adaptor large enough to cover the current consumption mu make sure that the adapt Even with a large adaptor enough to supply adequate power if the p not a dedicated line such as communication cause power loss you d better replace it with If the problem persists contact the nearesi assistance ine or UPT cable or if customer service fo tiplied by the reader count tor should be ower cable is it s so long to a dedicated line or reinforce it your The read range R R of the card differs each time the product reads the card The characteristics of a card are determined by the manufacturing process engaged by the card manufacturer So what you do that the cards in use are made by the same manufacturer nature of the coils used and in the irst is to check If you are using cards from different card make
13. rs the read range R R differs by the card which is the result of normal operation If you encounter a different read range R R for each card that is made by the same manufacturer please contact the nearest customer service English _ 15 SNILOOHS 31ANOY1L product specifications PRODUCT SPECIFICATIONS Item SSA R1001V SSA R1101V Power Current DC 12V Max 80mA Reading Time Card 30ms Input Port 2ea External LED Control External Buzzer Control Output Port 34bit Wiegand LED Indicator 2 Color LED Red and Green Beeper Piezo Buzzer Operating Temperature 25 C to 50 C Operating Humidity 10 to 90 Relative Humidity Non Condensing Color Material Silver with Black Polycarbonate amp Aluminum Die casting Dimension Wx H x Dimm 47 0 x 120 0 x 26 0 75 0 x 120 0 x 26 0 Weight 250g 10 340g 10 Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste
14. t the performance or quality of the product ex working noise safety Information RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit NOLLVWHOANI ALAAVS important operating and maintenance servicing instructions in the literature This exclamation point symbol is intended to alert the user to the presence of accompanying the appliance WARNING e To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture WARNING 1 N Oar w Be sure to use only the standard adapter that is specified in the specification sheet Using any other adapter could cause fire electrical shock or damage to the product ncorrectly connecting the power supply or replacing battery may cause explosion fire electric shock or damage to he product Do not connect multiple controllers to a single adapter Exceeding the capacity may cause abnormal heat generation or fire Securely plug the power cord into the power receptacle Insecure connection may cause fire When installing the controller fasten it securely and firmly The fall of controller may cause personal injury Do not place conductive objects e g screwdrivers coins me
15. tal parts etc or containers filled with water on top of the controller Doing so may cause personal injury due to fire electric shock or falling objects Do not install the unit in humid dusty or sooty locations Doing so may cause fire or electric shock If any unusual smells or smoke come from the unit stop using the product In such case immediately disconnect the power source and contact the service center Continued use in such a condition may cause fire or electric shock If this product fails to operate normally contact the nearest service center Never disassemble or modify this product in any way SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair 10 When cleaning do not spray water directly onto parts of the product Doing so may cause fire or electric shock CAUTION 1 Do not drop objects on the product or apply strong blows to it Keep away from a location subject to excessive vibration or magnetic interference 2 Do not install in a location subject to high temperature over 50 C low temperature below 25 C or high humidity Doing so may cause fire or electric shock 3 Ifyou want to relocate the already installed product be sure to turn off the power and then move or reinstall it 4 Remove the power plug from the outlet when there is a lighting storm Neglecting to do so may cause fire or damage o the product 5 Keep out of direct sunlight and heat r
16. ticularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus 13 Unplug this apparatus when a card is used Use caution when moving the cart apparatus A combination to avoid injury from tip over 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as powersupply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 4_ safety information contents PRODUCT INTRODUCTION INSTALLATION AND EXTERNAL CONNECTION INITIALIZATION OUTPUT FORMAT TROUBLESHOOTING PRODUCT SPECIFICATIONS mO NO o 11 12 13 14 15 16 Features What s included At a Glance Cable Color Scheme Cable Selection Installation Precautions on installation External Connection Basic Operations WIEGAND Output RS 232 Output Troubleshooting Product Specifications English 5 SLNALNOO oroduct introduction FEATURES This model is an elegant looking proximity reader that can be easily attached to a metal doorframe or the wall Featured by the epoxy adhesion and aluminium case R1001
Download Pdf Manuals
Related Search