User Manual - SupplyHouse.com
Contents
1. Look for H1 Symbol Corrective Action H1 symbol indicates heat is on If the H1 symbol is displayed and you still have no heat you may have an issue with your heating appliance Consult your heating professional Flashing WWSD Increase WWSD setting on tekmarNet reset control Flashing Away Press a user switch button other than Away typically or or go to your Scenes page on you gateway and change the scene to Occ or Unocc Flashing MAX The thermostat has a maximum air temperature set that is preventing the heating system from providing a higher temperature Call your installer or refer to the Installation and Operation Manual for information on how to adjust maximum room temperature settings Heat on before scheduled time CO Optimum start learns the heat up and cool off rate of the room and starts the heating or cooling early so that the room is comfortable at the scheduled time Pressing V button does not decrease temperature Flashing MIN There may be a minimum room temperature set Consult your heating professional More Information This User Brochure contains standard information on how to make adjustments to an installed product More detailed information can be found in this product s Installation and Operation Manual D537 at www tekmarcontrols com 7 of 8 2011 tekmar U537 12 11 Save Even More Energy the Easy Way Great Accessori2. If flashing the temperature Away cannot be adjusted by pressing the up or down arrows Consult the Installation and Operation Manual for this product for more information on this feature If flashing the system is in Warm Weather Shut Down The outdoor WWSD temperature is above the WWSD setting No heating will take place while in WWSD Equipment Operating Symbols These symbols indicate the current status of the system Heating is turned on The thermostat is part of an Air Group a group of heating zones within a DA commonly ducted air conditioning system and the air conditioning within that group is on This thermostat will be locked out of heating when this symbol is displayed which will save energy 2011 tekmar U537 12 11 6 of 8 Communication Symbols These symbols appear when this thermostat is part of a network and or when there is something wrong in the system ST D The thermostat is part of a network and is communicating with other devices in the network There is something wrong with the thermostat or the tekmarNet system This usually occurs if a control component has failed or is set up incorrectly Contact your installing contractor for more information or consult the Installation and Operation Manual for this product Symptom No heat or not enough heat and pressing A button does not increase temperature Frequently Asked Questions _
3. Energy Saving Accessories 479 User Switch 033 Timer With the touch of a button HH Program a night tell every thermostat in setback schedule for your house to operate at O O O all of your thermostats their night setback Cor with one device Away temperature Q Examples of these settings are as follows Mode of Operation day night ROOM example 70 F 21 C 65 F 18 C Note The presence of a schedule is indicated by the clock symbol 2011 tekmar U537 12 11 4 of 8 Changing the Backlight This thermostat has an LED backlight that can be configured as follows Changing the Units F or C Off Permanently Off 30 Temporary on for 30 seconds when a button is pressed On Permanently On On On during and off during Step 1 Press and hold the A and V buttons to enter the Adjust Menu and wait until this screen appears a new screen will appear every 2 seconds Step 2 Press the A or V button to adjust the backlight operation Step 3 Release all buttons and wait for the display to return to normal operation The adjusted setting will be saved Press and in memory Hold A and V together This thermostat can display temperatures in F or C Step 1 Press and hold the A and V buttons to enter the Adjust Menu and wait until this screen appears a new screen will appear every 2 s
4. U537 12 11 tekmar tekmarNet 4 Thermostat 537 Zoning Replaces 08 10 User Manual This brochure will provide you with the information you need to benefit the most from your tekmarNet thermostat Please visit www tekmarcontrols com for more detailed information on this or any other tekmar product This thermostat provides heating for one zone in your building It will maintain your air temperature with an on board ROOM sensor With the addition of one of tekmar s energy saving accessories this thermostat can also lower its temperature setting at night or when you are away from the house Temperature Adjustment This thermostat can operate at day X or night G temperatures see Day A or Night C Temperatures section for ROOM settings The temperature can be adjusted as follows Se Indicates ROOM BERT whether the AMI m day 3 or night C temperature If is being set if available 4 S C O Adjustment Buttons Adjust the temperature Step 1 Press the A or V button until the desired temperature is displayed Step 2 Release all buttons and wait for the display to return to normal operation The adjusted settings will be saved in memory You will be adjusting the temperature of the current operating mode To adjust temperature settings that are not shown on the screen you must enter into the Adjust Menu as described in the Adjust Menu section There may be other sy
5. econds otep 2 Press the A or V button to adjust the units otep 3 Release all buttons and wait for the display to return to normal operation The adjusted setting will be saved in memory 5 of 8 Press and Hold and Vv together 2011 tekmar U537 12 11 Display Symbols In addition to the features described in this manual there may be others operating in the background Among others this thermostat will display symbols on its screen in order to indicate what mode it is in what temperature it is operating at or what equipment it is trying to turn on This section describes each of those symbols OUTDOOR C rir SET at Li ROOM WWSD HEAT UT FSO he DE 4 WV O O Schedule Symbols These symbols appear when a Schedule Master or User Switch is connected to the system Those devices will tell this thermostat what temperature setting to operate at day 3 night or Away Refer to the Day 3 and Night Temperatures section for more information A Schedule Master is present in the system and this thermostat is following that Master s programmable schedule xt Operating at the Day temperature If there is no Schedule Master or User Switch in the system the thermostat will always be in this mode C Operating at the Night temperature A setback enabling accessory or Schedule Master thermostat has enabled setback Operating at the Away temperature
6. es for Your tekmarNet System Day Comfort User Switch 479 With the touch of one button every part of your home can switch between Day Night amp Away temperature settings While Away on vacation domestic water heating can be suspended to save even more Night Economy Away Best Economy amp DHW Suspend Let the system automatically switch between Day Night amp Away temperatures to match your schedule The Timer 033 can manage setback for all of the thermostats in your system from a central location EI Timer 033 Wake Ask your installer about adding a tekmarNet User Switch or Timer to add more energy saving convenience to your system tekmar Control Systems Ltd Canada g tekmar Control Systems Inc U S A Product design software and literature tekmar Head Office 5100 Silver Star Road are Copyright O 2011 by Control Systems Vernon B C Canada V1B 3K4 tekmar Control Systems Ltd and tekmar 250 545 7749 Fax 250 545 0650 Control Systems Inc Web Site www tekmarcontrols com i All specifications are subject 8 ev of 8 U 537 12 11 to change without notice T
7. mbols on the screen that affect thermostat operation Please see the Display Symbols section for a description of each symbol 2011 tekmar U537 12 11 2 of 8 Adjust Menu This thermostat has an Adjust Menu that allows adjustment of all of its settings The following items can be adjusted or viewed e Day 3 and night C temperatures if available Backlight on time Temperature units F or C e Thermostat type view only The Adjust Menu can be accessed as follows Step 1 Press and hold the A and Y buttons until the desired setting is shown a new screen will appear every 2 seconds Step 2 Press the Aor V button to adjust the temperature setting Step 3 Press and hold the A and WV buttons again to advance to the next adjustable setting Repeat steps 1 and 2 until all adjustments have been made Step 4 Release all buttons and wait for the display to return to normal operation The adjusted settings will be saved in memory Indicates setting cai ee is in the Adjust menu SET ROOM HEAT Indicates the a 1 x name of the TA Indicates setting being whether the adjusted day 3 or night C temperature Press and is being set if Hold and v available together This thermostat has access levels It will typically be installed and programmed by a heating professional and then locked in a User access level System critical settings will not be available for adjustme
8. nt For more information on these settings please consult your installing contractor or this product s Installation and Operation Manual The following pages describe the settings available to the User 3of8 2011 tekmar U537 12 11 Day xx and Night C Temperatures This thermostat is capable of running at a lower temperature setting when you are asleep or out of the building An energy saving accessory can be added to your tekmarNet system in order to activate these energy saving setback temperatures If one is connected day X and night C temperature settings will be available They are adjusted as follows Step 1 Press and hold the A and WV buttons to enter the Adjust Menu and wait until the desired setting is shown with the day XX symbol on the screen a new setting will appear every 2 seconds Step 2 Press the A or V button to adjust the temperature setting Step 3 Press and hold the A and WV buttons until the same setting is shown with the night amp symbol on the screen Step 4 Press the A or V button to adjust the temperature setting Step 5 Release all buttons and wait for the display to return to normal operation The adjusted settings will be saved in memory Setting Day 3 or Night SET SET ROOM HEAT ROOM gt C TR LL Lt LI of 4 V Press and Y C C Hold and V C C together tekmarNet
Download Pdf Manuals
Related Search