DVRCM User Manual
Contents
1. Password security measures User can only try five times in every 30 minutes otherwise the account will be locked Note For security reasons please change the default password in time if want to add and modify users please refer User Management section With regard to input Except using the DVR front panel and remote control to input user also can click the left button of mouse at the input box the software keyboard will be pop up NOTE When the DVR is recording timing recording or alarm recording if the power is cut off or forced to shutdown the device will preserver the videos and automatically return to the prior working condition 3 3 Preview After DVR started normbally it will enter into preview screen directly The preview screen display the current time amp date the name and status of each channel the meaning of the icons are as follows 1 When the channel is recording it will display this 2 icons ie H 264 Network DVR 3 lf there is motion it will display this icons TE If there is video block it will display this icon 3 4 Record Users can choose different recording modes according to their own needs For different recording modes when the channel is recording it will display a recording icon on the channel screen 3 4 1 Recording Notes User must have recording operating authority to record Before recording please confirm that the DVR has been installed hard disk2. OSD Output Screen will disply information when alarm happen in selected time section A Note Users should save each channels separately after setup complete 6 7 Video Detection Setup Main Menu gt System Setup Detection Figure 6 9 Explication 1 When in the switching type set video loss detection and blocking the non regional and sensitivity 2 When video channel changing is detected the screen will show the dynamic channel detection video loss and video shelter signs 3 Drag and drop with the mouse directly to choose the dynamic detection of the region press and hold the left mouse button to set up the detection regions press and hold the right button of mouse to clear detection region it is necessary to preserve the dynamics of the current detection region and press the save button after quit the region setting 6 7 1 Video Detection By analyzing the video image system will open the motion detection alarm when the it detects that there is mobile signal that can achieve the default sensitivity Figure 6 9 48 H 264 Network DVR VIDEO DETECTION SETUP CHANNELO1 X MOTION DETECT 10 Figure 6 9 CHANNEL Choose to the channel for motion detection all means all the channels ALARM TYPE Select the type of detection settings motion detection ALARM DELAY set corresponding delay time 5 255 seconds when the external alarm is abolished system will correspond delay time automati
3. Figure 4 6 In view of the information about online users including account name and IP address ONLINE USER Figure 4 6 31 4 2 2 Disk Management Menu HARD DISK Figure 4 7 Display the current hard disk attributes type total capacity usable capacity According to the execution button the users can do some operations such as current formatting disk DISK MANAGEMENT F4 Ed bd Ea HARD Diskda Y Former EE Figure 4 7 Note Please stop recording before format the hard disk 09 H 264 Network DVR H 264 Network DVR CHARP 5 System Control 5 1 PTZ Control 5 1 1 Connection 1 Connect the speed dome cameras s control cable to DVR s RS 485 port pay attention to A B match order 2 Connect the cameras video cable to DVR video input 3 Connect power to cameras 5 1 2 Preparation 1 Setup the control address of speed dome camera choose the corresponding protocol 2 Switch the current picture to display channel 5 1 3 Operation Click right key of the mouse when display pop up the shortcut menu then choose PTZ control or press PTZ key to enter the control menu Figure 5 1 Figure 5 2 IRIS FOCUS 200M Figure 5 1 PTZ When move mouse to the top bottom left and right place in the current picture screen will present the corresponding direction arrow automatically Press the mouse can control the direction lt can also be controlled throught the panel ort controller t k
4. and check whether the machine run normally the existence of serious network failure may cause the host restart repeatedly CWhen view the video or playback the recording normally the machine hang 1 Check whether the connection of the hard disk and replace the failure hard disk timely 2 Check whether the temperature is too high 3 Check whether there have heavy current device the impact of heavy current will crash the video cable and cause the host cannot work The operation of update failure 1 U disk compatibility bad and the host cannot recognize it change a new brand and try again 2 1 he USB connect bad 87 H 264 Network DVR Gin monitor or tv the image shows black and white Check the video input DVR monitor or TV is exactly the same video format if it isn t please change the setting to automatic station The monitor or pc screen cannot show anything 1 Check whether the power of monitor is on and the brightness is at the minimum station 2 Check whether the connection of video cable is ok The water ripple of image is clearly and have interference distortion 1 Check whether there exist short circuit 2 The video cable was interfered by heave current and the video cable cannot connect together with the heave current circuit please choose the shielded cable 3 Check whether the monitor or tv is aging CReal time image and video data exist the problem of color distortion 1 Check
5. gle ha cz onl a n pla Y Ww ond EJ q of gt O 12 H 264 Network DVR English Name English Z p Descriptions Descripions POWER Power on Power off REC Recording control SEARCH 1 4 8 9 preview screen window modes switch 2 Pop up the soft keyboard at the editing status Pop up the relative menu of the currennt channel at the previewing status Search recording files Slowly playback 1 2x 1 4x 1 8x single frame playback LENS VOL Speed playback 2x 4x 8x playback Lens control Volume down Number decrease Pop up the relative menu of the current channel at the playback status LENS VOL Stop Lens control Volume up Number increase ture UTE Muteopencse Mute open close Number input 2 0 9 10 Enlarge the corresponding channel to full screen at the previewing statue Close the software keyboard ESC PTZ Close the current window Backspace Exit the current control Back to the last menu Exit the status of box list selection 11 Play atthe searching status PlayPause at Play atthe searching status PlayPause searching status Play Pause Switch between Full screen and Multi screens playback modes pe pp o ejeje H 264 Network DVR Enter into or exit the PTZ control at preview Confrim the operations Switch the editing area Time date IP address Switch between full screen and multi screens at OK the
6. 9 The system back to factory set according to the options menu select the corresponding set to resume Note Menu color Language Date8 Time format system IP address User account won t be back 61 REYERT DEFAULT Figure 7 9 CHARP 8 Remote Network Control and Management 8 1 Remote Settings 8 1 1 Network Security Settings Please setting internet security level before install Activex 1 Open IE Browser select Tools Internet options 2 In the dialog box that appears select the Security tab Figure 8 1 62 H 264 Network DVR Internet Options gt I x General Security Privacy Content Connections Programs Advanced Select a Web content zone to specify its security settings 906 Internet Local intranet Trusted sites Restricted sites Internet This zone contains all Web sites vou ee haven t placed in other zones o Security level for this zone Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level Lok cancel 4 Figure 8 1 ply 63 H 264 Network DVR H 264 Network DVR 3 click on the Custom Level enter the security settings Figure 8 2 Security Settings settings 164 Actives controls and plug ins E Automatic prompting For Actives controls O Disable Enable 164 Binary and script behaviors Administrator approved Disable F Dow
7. Display the event of the system according to the classification of log VERSION ros a and software versions or characteristics of the system such as SYSTEM INFO e release date NET USER Check the information of online user including IP address login account SYSTEM Settings of the basic parameters such as system time date format video format language and the number of this equipment ENCODING Settings of the video or audio coding mode frame rate quality and so on Settings of advance recording timing video dynamic detection external alarm timing and so on The record plan can be carried out during a week and each day could be divided into four periods PTZ Settings of PTZ agreements and communication parameters NETWORK Settings of network address PPPoE port and DDNS ALARM Settings of type of sensor alarm video channels alarm output and the corresponding parameters RECORDING SYSTEM SETUP DETECTION Settings of sensitivity and regional of the dynamic detection handling methods when the video lost or occlusion alarm output and video channels 24 H 264 Network DVR DISPLAY ce of transparency and color of the menu the way of picture cruise and interval Controls of automatic recording manual recording or stop recording REC CONTROL Information about the hard disk and format operation of the hard disk HARD DISK Selection of alarm protection or removal alarm output allow
8. FPS NTSC D1 100 FPS PAL 120 FPS NTSC CIF 100FPS PAL 120 FPS NTSC CIF 200 FPS PAL 240 FPS NTSC CIF 400 FPS PAL 480 FPS NTSC Audio Input Audio Output Audio Codec CH CH 4 16CH Recording Modes Triplex Network Interface PTZ Control Communication RS485x1 USB2 0x1 Interface Remote Control Power Supply AT atch power supo Appendix B Alarm Input Interface Instruction 8CH alarm input no input model limitation often open or often close The alarm detector GND terminal parallel with com terminal alarm detector is supplied by external power The alarm detector ground terminal parallel with DVR ground terminal 90 H 264 Network DVR NC terminal of alarm detector connect to DVR alarm input ALARM lf the users want to reset the alarm which has been triggered a detector such as smoke detector which supply by the 12V DVR power and controllable is needed The external power should share the same ground with the DVR if the device is supply by external power Vec Vee y O 1 Internal signal q 3 y External alarm input PA GND Alarm Input Circuit Alarm terminal equipment ALARM INO Power supply DVR alarm input interface Alarm Input Connection Diagram 91 H 264 Network DVR Appendix C Alarm Output Interface Instruction 4CH switch alarm output the users can choose often open or close contacts The external alarm device needs extra power Alarm
9. and the hard disk have been formated correctly 1 Enter into the recording control interface Click the right button of mouse at preview status and select Recording Control in the pop up menu or through the Menu Recording Control to enter the recording operation interface user can also press REC button at preview mode to enter into to the recording control interface directly Figure 3 5 RECORDING CONTROL Dx A o 0 65 da B Figure 3 5 2 Recording operation interface instructions AUTOMATIC The channel will automatically begin to record as the settings that users has setted before 18 H 264 Network DVR MANUAL Which has the highest level of priority no matter what the current state of the channels are if user click Manual button all the relative channels will be recording STOP Stop all recording ALL Choose all channels 3 4 2 Playback There are two playback ways in the system fast playback and advanced playback User can search file to playback or playback as time 1 Fast Playback Click Search or the right button of mouse under the preview screen then choose playback in the pop up menu to enter the fast playback for fast playback mode it only support single channel playback 2 Advanced Playback User Select Menu gt File playback then can enter into advanced playback It not only support each channel playback independently but also support the 4channels to playback at the
10. information Menu SYSTEM INFO gt DISK INFORMATION Figure 4 3 Display the types socket positions total capacity and usable capacity of the hard disk which have been connected to device DISK INFORMATION 149 OS 6 41G6 Figure 4 3 28 H 264 Network DVR 2 Log information Menu SYSTEM INFO gt LOG INFORMATION Figure 4 4 Display log information of the system The users can search the download information easily LOG TYPE Can choose all system set data management warning videos operation users management START TIME Set the start point of log inquiry END TIME set the end point of log inquiry After the settings of log period and type press the search button the users can see the log information in the list which meet the conditions using the button lt lt and gt gt the users can also turn the page LOG INFORMATION ALL Y 2009 02 25 2009 02 25 39 32 SYSTEM SETUP 16 38 LOGIN admin LOGIN admin LOGIN admin LOGOUT admin ofSTEM SETUP LOGOUT admin LOGIN admin LOGOUT admin Figure 4 4 99 H 264 Network DVR 3 Version information Menu SYSTEM INFO VERSION INFORMATION Figure 4 5 Display the versions of system software hardware and MCU including release date VERSION INFORMAT I ON Figure 4 5 30 H 264 Network DVR 4 Online user Menu SYSTEM INFO NET USER
11. output A 7 Alarm output gt ES E Internal circuit 4 Internal circuit RELAY Circuit of Alarm Output 92 Appendix D Model Interface Diagram 1 The back panel diagram of 4ch DVR H 264 Network DVR UTP Vinl Vin3 Ainl Vout USB O1C OC AB MOUSE Vin2 Vin4 Ain2 Aout TAN ART ES IL 0 1 Vie 11 Ce IE Ale E SY UY y ON EN VAN ANS llo MZ Lo F e E i F FNF C7 2 The back panel diagram of 8ch DVR UTP r E USB Vout Vinl Vin2 Vin3 Vin4 Vins Vin6 Vin7 Ving IPS ASS SAS MOUSE Aout Ainl Ain2 Ain3 Ain4 oa leed Ain5 Ain6 Ain7 Ain8 3 The back panel diagram of 16ch DVR 93 ere HEC Ground e O G Ground Alarm Output Alarm Input 94 10 UTP USB MOUSE 11 12 13 14 MIC SPK H 264 Network DVR 15 16 Vout Aout Earthnet Interface AOUT Audio output BNC for USB mouse or USB Disk Video Input BNC USB mouse interface forbid to connect with other use device RS485 interface A B Connect with monitor DB15 Talk back Input 3 5mm Audio Input BNC VOUT Video output BNC SPK Talk back Output 3 5mm
12. the corresponding IP address subnet mask default gateway see section 6 5 Network Settings DVR which the subnet mask default gateway and the PC the same as IP address must be in the same network segment but you can not have been used with the same IP address or IP addresses will result in conflict The above map for example IP address should be 192 168 0 X in which X is not 40 or 1 including the other is using the IP address and can not be more than 255 the subnet mask is 255 255 255 0 gateway to 192 168 0 1 67 H 264 Network DVR 8 1 3 ActiveX Download Installation After completion of the above settings open the IE browser enter http 192 168 0 X 192 168 0 X network settings for the DVR to set the IP address and confirm if changes to network settings DVR http port we must also add a colon port number assuming the current port number for the P such as the right to visit http 192 168 0 X P after select install the ActiveX control the network automatically download and install control Figure 8 6 m Tour secunty settings do not allow Web Figure 8 6 If the DVR ActiveX have a new version is available IE browser will automatically update if prompted Please update ActiveX to ensure that the client ActiveX are not in use or else fail to update 8 2 Remote Connection 8 2 1 Connection Download the ActiveX is complete run the ActiveX panel automatically pop up login Figure 8 7 68 H 264 Network DV
13. the position automatically which is corresponding to the preset number 34 H 264 Network DVR 5 2 Video Control Click right key of the mouse when display pop up the shortcut menu then choose Video adjust As the following picture Figure 5 3 BRIGHTNESS CHROMA CONTRAST SATURAT ON Figure 5 3 Adjust the Brightness Chroma Contrast Saturation of current picture use the mouse wheel or lt key to make adjustment with precision 5 3 Sound Monitoring To monitor the scene sound in current display click right key of the mouse on the channel need to be monitored pop up the shortcut menu then choose open monitor if this channel already be choosed the option will be Close monitor 5 4 Alarm Control 5 4 1 Alarm Control Main menu gt Alarm Control Figure 5 4 Automatic Arm and disarm in schedule according to the alarm setup Manual High priority level after choosing manual arm all channels will be in arm status 35 H 264 Network DVR Clear Disarm No response to the alarm input Output Whether the alarm input is agreed when alarm happen ALL Choose all channels Setup the alarm output port white color means the channel is selected press Confirm to save and Exit to cancel the setup and return Figure 5 4 5 4 2 Clear Alarm Click right key of the mouse when display pop up the shortcut menu then choose Clear Alarm As the following picture Figure 5 5 36 H 264 Network D
14. time period Log type Can choose all logs system log configuration log data log alarm log picture recording log and user management 78 H 264 Network DVR 8 3 5 Download User can remote download the files of Digital Video Recorder to keep it on the local backup or play Figure 8 16 Status control Common Video Log Download Channel a11 Channel Record type All record Start time 2009 310 0 00 00 search End time 2009 3 10 23 59 59 Size bytes Download Figure 8 16 Channel Choose the channel that needs to be search 79 H 264 Network DVR Record type all recording general recording alarm recording motion recording Start time End time choose the time period 8 4 Setting Note Choose save which will keep the current setup Choose save all which will keep all the setup Click the right setup enter to setting faceplate Figure 8 17 80 H 264 Network DVR setting Alarm Setting PTZ Setting Video detect Video loss Video blind Local setting Common setting Encoding setting Record Setting Common setting GUI Language English Version MA Video Window Color Record setting Directory D LvrFiles Rec al Reserve Disk Space 100 M gt 100 3 Auto divided duration 30 min gt 5 and lt 120 W Aito overlay when disk is full Capture Setting Directory D LvrFiles Ing PA Reserve Disk Space 100
15. whether the video input amp output setting is right 2 Check whether the connection is right When using the pc screen the image get the problem of distortion and color cast 1 Check the connection of VGA cable and the DVR is right 2 The temperature of DVR working is too high or the heat can t dissipate which may cause the chipset of VGA cannot work normally or the setting of current circult is wrong CMosaic appears in the server s videos playback 1 The low parameters would cause the whole quality of videos and then Mosaic may appear in the playback 2 Bad disk sectors also leads to the appearing of Mosaic during the playback 88 H 264 Network DVR CActiveX of client can t be updated automatically 1 Whether the IP address accessing server is correct 2 Whether the settings of browser are correct refer to 8 1 2 3 Please turn off the window if it s open 4 Support the ActiveX control has some problems of compatibility please use Microsoft Internet Explorer to access server Appendix A Technical Specifications 4CH 8CH 16CH Video Compression 89 H 264 Network DVR Video Input 4ch 1 0Vp p 750 BNC 8ch 1 0Vp p 750 BNC 16ch 1 0Vp p 750 BNC Video Output 3ch 1 0Vp p 750 BNCx1 Super Videox1 VGAx1 Display 720x576 PAL 720x480 NTSC Recording D1 704x576 PAL 704x480 NTSC Resolution HD1 704x288 PAL 704x240 NTSC CIF 352x288 PAL 320x240 NTSC D1 25FPS PAL 30 FPS NTSC D1 50 FPS PAL 60
16. H 264 Network DVR H 264 Network DVR User Manual Mar 2009 H 264 Network DVR Table of Contents CHARP T ProOdUCEINTOQLICIION 8 nn ne rate a ent ee eee eat 5 LOVE Wins 5 A AAA a tt tle cet tat a TATA IN A AN II NA A ents META eee 6 CHARP 2 Mouse and Remote Control Operation cccccceseeeesseeceneeeenseecensesenseecensesenseeeeneesonsees 8 2V MOUS A A o 8 Ae A A A A eee aaa 11 CHARP 3 Basic OpDeralON Sienra io ea ne ane ee tetes 15 SEPONO NUCI ON EeeRE nS eR ERENCE MERE RN CRRRERENE ANAT RERENERENRRECERE ARNE CERT RNI ERENCES nN CE CRC CeC ERENCE RRR ER CCRC E CER CER ECR S eR NE CRESS R EN CC aER REA RES eRER NT 15 ze al 9 11 1 EPOC PCE EEE ee eee eee eee ce ee eee eee eee eee eee ee ee ee ee ee 15 A a 18 SA A cw no nn sccm sere ene 18 34 2 Plavba O 19 3 4 3 File BACKUP D 22 CHARP 4 Menu Opera coses 24 NS A AAA Une 24 AD AAA 26 A RSE A LR L O y o Se saath ce rset A PE OE O cee pach aciye E 26 Menu SYSTEM INFO AE a 26 4 2 2 Disk Management cccccceccccceeeececeeeeeecaeueeeeceaeeeesaueeeeeeaeeeeseaeeeesaaseeesseaeeeessaaeeeensaeceeseaeeeessaeeeessageeeesaeeeessaueeeessgeesenseeeeessegeeeesas 32 A A eine ne ner Rec een Rede Re ne ee eR eRe eee Re Re ee eee Reece eee eee ee Ree eRe eee RO 33 A A did ide did don dd dde Does 33 DTZ PDI AO LA RAR ER Ne RE cee rt ta ae eta heer ae se eee a teste ee ae tec aa ell a ee eal rete el
17. M i gt 100 M Downloading Setting Directory D LurFiles Domload Reserve Disk Space 100 M i gt 100 M stream Transport Protocal UDF Performance best real time Dave Figure 8 17 81 H 264 Network DVR 8 4 1 Local Setting Common Setting GUI language Chinese English Adjust WINDOWS COLOR RGBColor parameters setup Y Start heartbeat mechanism real time detecting of the network connection status Record Setting Catalogue choose the storage place of local recording Disk retain space the recording will not use this space Automatic Segmentation cycle setting range of 5 120 minutes Can automatically cover when disc is full Can do this again Capture Setting Catalogue choose the storage place of local recording Disk retain space the recording will not use this space Download Setup Catalogue choose the storage place of downloaded files Disk retain space the downloaded files will not use this space Stream Transport protocol UDP TCP be optional choose UDP for general LAN choose TCP for WAN Performance The depth buffer that network data receives is according to network situation The realtime better the buffer smaller the degree of fluency better the buffer bigger In general choose realtime best for general LAN choose realtime better or good both at realtime and degree of fluency for WAN 8 4 2 Common Setting Encoding Setting Record Setting Alarm Setting PTZ Set
18. R Login server After succeed in logining or logouting server exit dialog Login mode Delete le Ey IP address C By domain 259 33 44 195 59 33 44 195 42192 168 0 171 192 168 0 171 192 168 0 153 182 166 0 153 IP Address Port User Name Password Save Password Auto start all channels when succeed in logining server From window 1 to start preview server alias 1192 168 0 153 Dave Exit Figure 8 7 Login model offers two login approach IP Address fill in IP address enter an address with the same DVR s IP address network settings By domain fill in the host network settings to set up the DDNS domain name or the domain name mapping through the router authentication domain can confirm the validity of the domain name Port Input port number and network port number must be set the same port number Username password default username is admin Auto start all channels when succeed in logining server through the wan network connection so as not to enable 69 H 264 Network DVR From Window X to start preview From which window to start previw After succeed in login or logout server exit dialog After succeed in login exit dialog Select to delete the corresponding server can be deleted Alias To set the server Alias Click save in order to management Enter the appropriate parameters select Login Figure 8 8 If the login fails the pop up figure prompte
19. VR ALARM NFORMAT I ON 2009 01 01 13 32 23 Figure 5 5 Press Clear key to stop the current alarm record and output But not disarm may trigger the alarm again Icons explication All alarm input channels are at arm status a One or several alarm input channels are at arm status hd One or several alarm input trigger alarm click this icon and pop up Clear alarm window it will display the alarm information 87 e H 264 Network DVR CHARP 6 System Setup Main Menu System Setup Figure6 1 System Setup is including System Encoding Recording PTZ Network Alarm Detection Display A Note The user can only enter into the system setup when he has authority ENCODING RECORD NG Figure 6 1 6 1 System Setup Main Menu System Setu System Setup Figure 6 2 38 H 264 Network DVR SYSTEM SETLP gt lt 2009 02 25 14 43 0 YYYY MM DD Y Y 24 HOURS w English w 0 PAL Figure 6 2 System Time Revise the current DVR system date and time Click Set Time to save the setup Date Format Date demonstration format options including year month day month date year day month year and so on Separator Three options P for example if choose the time display will be 2009 02 25 Time Format 24 hour format and 12 hour format Language Language options DVR ID When one remote controller controlling seve
20. Ve ate ota a tn tte DE IIA 68 9 21 COMME cUO Naci traia D ae ae ee tre 68 8 2 2 Multiple Servers Login si iiissssssiiiieeeseeeceecennenenseeeeeeeeneneneseeeeeeeeeeenneseeeenes 72 0 2 3 Grane AS SOCIAlTEUMENUS mur A A 72 cs A D A O 73 Seo COMMON da A a ne ane te ee dde A 74 DI 2 MO AA 75 A O A A A 76 AP 77 IN A De D dd en ert E ter errr terre de errr eter te 79 oC IES ETNII 1 E EPE sane tie te AEN eT ey oT Dey ee ee ne ee ee ee ee eee eee ee Pee een ne ee Pee en 80 H 264 Network DVR A eee ees ea eet eee ie aa 82 8 4 2 Common Setting Encoding Setting Record Setting Alarm Setting PTZ Setting Video Detect Video Loss Video Blind 82 8 9 OOIBar IN TOUCH ai 83 O Oo eee SE OO E 85 User can playback the local recording files and also can remote playback the files on DVR Click stop to stop playing 85 8 6 OIE OPENS AAA AAA AAA AAA AAA AAA AAA EA AAA 85 3 0 1 PTZ and Preseti Controls raciones 85 602 LORS CONO ae 86 0 WII MAS stas 86 CHRHARP 9 FAO pia 86 Appendix A Technical Specifications oocccccccoconccnncccconnnnnonononnnnnnnononnnnnnnnnnnnnnnnn non nn nn nene n nn nn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnos 89 Appendix B Alarm Input Interface Instruction oocccccoccococccncocccococonoconoconononononononononnnonnnnnnnnnnnnnnnnnnnnnnnn
21. ally obtained WAN s dynamic IP address If choose PPPoE Auto Link option DVR will try to connect PPPoE when power on x Note After PPPoE dial up successful user may visit the DVR remotly according to PPPoE IP displayed IP address In local area network can visit the DVR through the network card 6 6 Alarm Setup Main Menu System Alarm Setup Figure 6 8 46 H 264 Network DVR Figure 6 8 Alarm Input Choose the corresponding alarm channel number ALL means all channels Device Type Alarm input Normal Open or Normal Close options voltage output mode Alarm reset after Setup the corresponding delay time 5 255 seconds after exterior warning cancelled the system will delay the time automatically Then close the alarm the linkage output SEQ Display When alarm singal happen lt will partrol display single channel which is setup to record The patrol time can be setup in system setup Output mode Recording Channel Select the channels need to be recorded if alarm happen when system is in Automatic record mode 3 4 1 channel record and The alarm record time is aviable in Video setup video Setup the system will open the alarm record Schedule Make the week as alarm output time section unit permit the alarm output and OSD output in the corresponding time 47 H 264 Network DVR DEV output Alarm may linkage the corresponding alarm output device in selected time section
22. back modes slow playback fast playback and frame by frame playback It can display the exact time of the incident when playback the recording file 8ch alarm input the types of alarm can be generated by setting the regular open or normally closed the switch and with video loss alarm motion detection alarm the alarm device can be a smoke detector temperature detectors infrared detectors etc With 4ch relay switch values alarm output it can achieve alarm linkage and the live lighting control conveniently Both the alarm input and alarm output interfaces are with the protection circuit make sure that the main equipment from damage Support PTZ decoder through the RS485 communications scalable multiple decoder protocols for the achievement of PTZ and speed dome Communication Interfaces Smart Operations H 264 Network DVR Changes the settings and parameters of the system or software upgrade Remote alarm processing and system logs searching and more functions Adopt Embedded TCP IP protocol and linux operating system user can browse the system through IE browser Management modes Adopt the enhanced user management only the qualified users can login user can set different users with different authorities flexible and convenient according to their needs With a special interface for the achievement of alarm input and PTZ control With a standard Ethernet interface for viewing remotely through network Frien
23. cally then close the alarm output and interaction RECORDING Select the desired video channel of the video channel can repeat when alarm occur If the system is in record automatically mode video mode see 3 4 1 channel video and the alarm record in the record setting is within the effective time see Video Settings 6 3 the system will start the alarm record ALARM DEV OUT The alarm output linkage occurs with alarm SCHEDULE To set the alarm output period for week it means the alarm output and display are allowed within corresponding time 49 H 264 Network DVR SENSITIVITY Can be set as follows the highest high average low screen tips within the time of selection corresponding information will be shown when alarm occurs Copy the current settings to the following users access to the channel settings can be copied to other channels to achieve the same alarm settings dynamic inspection area click setting land then enter The setting area is divided into 192 16X12 areas The green area is dynamic detection zones the white areas is area without any deployment Hold and press the left mouse button to set up detection region press and hold the right mouse button to clear the detection region Press save button to save the y dnamic detection of regional settings Figure 6 10 Figure 6 10 Note When copying the parameters only copy detection parameters of the current settings copy the dynamic
24. ce such as radiator or direct sunlight or excessive dust or mechanical vibration areas CHARP 1 Product Introduction 1 1 Overview This series standalone DVRs are high quality digital monitoring system products which are researched and designed specifically for cctv field which adopt embedded processors and linux operating systems apply of high performance coding and decoding chipsets bring in the most advanced IT se H 264 Network DVR technological achievements such as audio codec high capacity storage hard disk TCP IP network and more which fix the code in FLASH making the system more stable the image more clearer and the function more powerful This series of digital video recorders can be used independently but also can be networked to form a powerful network monitoring center which have been widely used in different areas and sectors security and surveillance such as domestic and international bank telecommunications power justice traffic residential area factory storage resources water resources etc In addition which also play an very important role in home monitoring system This user manual takes 8ch standalone DVR as sample to illuminate specifically all the figures are based on this DVR for the operation of 4ch and 16ch DVR please take this for reference 1 2 Features Realtime Monitoring Compression Format With analog output interface and VGA interface support monitor output and display
25. ckgroup 25 50 75 are optional Start the turning Start the channel turning function all the channels will display by turns Turning alternation Set up the schedule for turning the time is from 5s to 120s The turning page includes single channel four channels and nine channels The single channel option means turning page is in single chanel The four channel option means the turning page is with four channel channel 1 2 3 4 formulate page 1 channe 5 6 7 8 formulate page 2 The nine channel page means the the turning is in 8 channels The turning sequence is single channel four channels nine channels in turn CHARP 7 System Management Main Menu gt Advance to show sub menu including user accounts exception handling system maintenance output regulation restoring the default Figure 7 1 54 H 264 Network DVR EXCEPT ON SOFT UPGRADE B VGA ADJUST Figure 7 1 7 1 User Account Main Menu Advance User Account Figure 7 2 55 H 264 Network DVR USER MANAGEMENT admin YES NO default YES NO user YES NO ADD DELETE CHANGE PASSWORD Figure 7 2 User name characters in length up to a maximum of 8 bytes ignoreding both spaces Can be letters numbers or other symbols The number of users can be up to 12 the user name can not be repeated admin users can modify the password for each user and permissions other users can only edit your password view their own competence Chang
26. d admin user is a high authority may carry out all operations and the default user is low in permissions to factory default When there is no way users log on or write off the current user the system will automatically log on with this account Users can modify this account through the authority to finish some permissions for which there is no need to log on 7 2 Exception Main Menu gt Advance Exception Figure 7 6 58 H 264 Network DVR EXCEPT ON Figure 7 6 Exception To choose the type of abnormal situation the hard disk is full the hard disk error network disconnection Buzzer Alarm whether allow buzzer alarm prompt or not when there is abnormal situation Alarm output Where there is abnormal alarm start the joint output of alarm Note the system can view the log records of detailed exception information 7 3 System Maintenance Main Menu gt Advance Soft upgrade Figure 7 7 Click to start to upgrade the system automatically start to detect the upgrade file 59 H 264 Network DVR STSTEM UPGRADE Figure 7 7 7 4 Output Adjustment Main Menu gt Advance VGA Adjust Figure 7 8 Manage the VGA output adjustment region color brightness and resolution 60 H 264 Network DVR 7 8 Note restore Local display select this the output parameters will be changed to factory set 7 5 Restore Main Menu Advance Restore Figure 7
27. d please check the IP address port number user name password Figure 8 8 Lyr eb E Lyr eb E Failed to connect Password error Figure 8 8 After a successful login is shown below Figure 8 9 70 H 264 Network DVR Live02 192 168 0 193 2003 03 05 20 42 23 THU er 4 le AN H 264 Embedded 3 192 168 0 193 2009 03 05 20 42 23 T Focus Aux Zoom Iris 5 Live05 192 168 0 193 2008 03 05 20 42 23 THU 4 Live04 192 168 0 193 CHOP 3 Y Ona EE 66 CA Jol L LA DEL Figure 8 9 ae H 264 Network DVR 8 2 2 Multiple Servers Login Click Login in right side of screen can loggin other servers at the same time 8 2 3 Channel Associated Menus Right click in the preview window pop up menu associated channel Figure 8 10 Full Screen Full Display Start Prewiew Search Figure 8 10 Full screen Enlarge the interface to entire screen Full Display The video display window will enlarge to full screen display Start audio Open audio Stop Preview Stop the current channel preview Start Record Save the realtime video Speed 1 Playback mode to speed up the playback speed 72 H 264 Network DVR Speed To lower speed playback Capture Capture the current window picture and save Search Search video files including local search and remote search Channel Name set the name of the DVR corresponding channel preview and record overlay of the c
28. detection of parameters does not include the detection of regional 50 H 264 Network DVR 6 7 2 Video Loss When the video images do not exist or are interrupted the system can be dealt with in accordance with the appropriate settings Figure 6 11 VIDEO DETECTION SETUP CHANNELO1 MOTION DETECT F MOTION DETECT VIDEO LOSs VIDEO BLIND MON O0 00 24 00 MM 00 00 24 00 Figure 6 11 CHANNEL Choose to the channel for video loss all means all the channels ALARM TYPE Select the type of detection settings video loss ALARM DELAY Set corresponding delay time 5 255 seconds when the external alarm is abolished system will orrespond delay time automatically then close the alarm output and interaction ALARM DEV OUT The alarm output linkage occurs with alarm SCHEDULE Setting the alarm time period at week means alarm output or screen display is allowed in the corresponding time 51 H 264 Network DVR screen tips Within the time of selection corresponding information will be shown when alarm occurs Copy the current settings to the following Users access to the channel settings can be copied to other channels to achieve the same alarm settings 6 7 3 Video Blind When someone maliciously blocking the lens or as a result of light and other factors leading to a video output in a single color screen the image will not be able to conduct on site monitoring By setting the sh
29. dly Human Computer Interaction interface it can be operated by mouse to achieve all functions H 264 Network DVR control functions CHARP 2 Mouse and Remote Control Operation 2 1 Mouse operation list of items to choose When at the mode of PTZ control click the corresponding buttons on screen to control the rotational direction of the camera Single left click In the input box you can choose the numbers symbols text transform by clicking the left mouse button on the soft keyboard lt Backspace _ spaces H 264 Network DVR when the input type is data number this Numeric keypad will pop 0 9 enter the number C clear the current content lt lt backspace Real time monitoring screen click the right button of mouse there will be a pop up menu as follows QUAD SHIN SIN PLAY BACK PTZ CONTROL Single right click RESET ALARM START AUDIO VIDEO ADJUST SET RECORD NG MAIN MENU You can use this menu to switch the window modes of the preview screen start records playback PTZ control start audio set recording modes and more operations H 264 Network DVR In the mode of Quad click the left button of mouse there will be a pop up menu as follows FULL QUAD REC SEARCH PLAY BACK STOP SPEED SPEED MUTE HIDE CONTROL You can switch the monitoring screen in single window or four windows search records and play control show or hide the control strip Cl
30. e 8 3 3 Click Properties Figure 8 4 65 H 264 Network DVR a Local Area Connection Properties General Authentication Advanced Connect using E9 Realtek RTLE169 8110 Family Gigab OST This connection uses the following items File and Printer Sharing for Microsoft Networks los Packet Scheduler Internet Protocol TCP IP Install Uninstall Description Transmission Control Protocol internet Protocol The default Wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected Notify me when this connection has limited or no connectivity Figure 8 4 66 H 264 Network DVR 4 Double click Internet Protocol TCP IP Figure 8 5 Internet Protocol TCP IP Properties alka gmmg General ou can getlP settings assigned automatically if your network supports this capability Uthenwise pon need to ask pour network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IF address IF address 192 168 1 40 Subnet mask 25H 266 255 Default gateway 0 Use the following DNS server addresses Preferred ONS server U2 96 102 3 Alternate ONS server Figure 8 5 5 See PC s IP address subnet mask default gateway Figure 8 5 in the parameters depending on the specific circumstances of different users 6 DVR set up
31. e Password Select the account needing to be amended enter the current user password and enter the account password and confirm the new password Press the Save button to modify the password Password can be set to 0 to 8 Figure 7 3 Figure 7 4 Note the current user password to enter the menu refers to the user login password admin users can use their own password to modify other user s password 56 H 264 Network DVR MODIFY PASSWORD NFORMAT ON P SSHORD MODIFY SUCCESS CONF RM Figure 7 3 Ml ENTER MAIN MENU Mm SYSTEM SETUP Mm ENCODING SETUP M RECORDING SETUP mPTZ SETUP M YIDEO DETECTION SETUP BLOCA DISPLAY SETUP Ml SYSTEM MAINTENANCE m PLAY BACK Mm PTZ CONTROL Figure 7 4 To increase users to add new users and set user permissions control Increase access to the user s menu interface then enter your user name user password and Confirm password password by twice must be the same and configure the list of appropriate popedom for the user in the popedom control Allow duplicate log means that the account can be used at the same time multiple users can log on to the system using 57 H 264 Network DVR the account Figure 7 5 ENTER MAIN MENU ofoTEM SETUP ENCODING SETUP RECORDING SETUP PTZ SETUP NETHORK SETUP ALARM SETUP VIDEO DETECTION SETUP LOCAL DISPLAY SETUP Figure 7 5 there are there default users admin usrer default The three users can not be delete
32. elter alarm can effectively prevent the occurrence of this phenomenon Figure 6 12 VIDEO DETECTION SETUP CHANNELO1 MOTION DETECT F MOTION DETECT VIDEO LOSs VIDEO BLIND MON Y 00 00 24 00 MM 00 00 24 00 Figure 6 12 CHANNEL Choose to the channel for shelter alarm all means all the channels ALARM TYPE Select the typeof detection shelter detection 52 H 264 Network DVR ALARM DELAY Set corresponding delay time 5 255 seconds when the external alarm is abolished system will orrespond delay time automatically then close the alarm output and interaction ALARM DEV OUT The alarm output linkage occurs with alarm SCHEDULE Setting the alarm time period at week means alarm output or screen display is allowed in the corresponding time screen tips Within the time of selection corresponding information will be shown when alarm occurs Copy the current settings to the following Users access to the channel settings can be copied to other channels to achieve the same alarm settings 6 8 Local Display Main menu System setup Display Figure 6 13 LOCAL DISPLAY H 264 Network DVR Figure 6 13 CHANNEL NAME Click the channel name modification button enter the channel name menu and modify the channel name WINDOW COLOR Display stype for the widow and the menu baby blue fuchsin heavy green are the three optional color TRANSPARENCY Setting for transparency of the ba
33. ey Speed Control the direction soeed of PTZ camera through the step size adjustment the bigger size the faster speed 04 lris Iris size adjustment Focus Focus adjustment H 264 Network DVR Zoom Zoom function also can use the mouse wheel to control the zoom Note Change the iris focus and zoom mode through MODE key it can also control the LENS the LENS IRIS FOCUS ZOOM E ON jo A ETOP SETUP ME SCAN LIMIT M AJTO SCAN PATTERN SET OFF MES RUN PATTERN AUTO IRIS 5 2 Operation lt Scan Limit gt Move the speed dome camera to left side and setup the left limit Setup the right limit when camera move to right side lt Auto Scan gt After starting it can control the camera scan automatically between the right and left limit side lt Pattern Set gt After starting it will record all paths of the PTZ camera and save it when stop lt Auto Iris gt System will adjust the iris to the best effect automatically after switch on lt Backlight Compensation gt Choose this option system will provide backlight compensation when in the dark situation Note This operation function needs to connect with the front end device and match the protocol Aux Input the auxiliary output number which need to be controlled Click ONT or OFF key Preset Adjust the direction and angle of cameras input the preset number and click Setup Input the preset number and click Call camera will turn to
34. files on DVR Click stop to stop playing 8 6 Other Operations 8 6 1 PTZ and Preset Control Search Local file 192 168 0 153 He 192 168 0 155 Figure 8 19 H 264 Network DVR H 264 Network DVR Figure 8 20 Direction button respectively control PTZ to up down right left Click the middle button to setup the preset point and adjust 8 6 2 Lens Control Focus Aux Figure 8 21 focus Control lens to long distance and short distance Auxiliary Auxiliary switch image Fine adjust the focus Aperture Aperture adjustment 8 6 3 Window Browse Modes Figure 8 22 Provides 8 kinds of window modes for switching single channel 4 channels 6 channels 8 channels 9 channels 16 channels 25 channels 36 channels CHARP 9 FAQ Connected to the power the machine didn t start running 1 Check whether the power switch is turned on 86 H 264 Network DVR 2 Check the operater is correct 3 Check whether the power is adequate CHanging at the boot screen 1 The hard disk has physical damage 2 The system guide is un normal OStarting very slow The error of hard disk can cause the mainboard check the hard disk repeatedly so the satrting is very slow CHost restart repeatedly 1 Please check the host power supply if connect lots of hard disks there may be appear power insufficient and cause the host restart repeatedly 2 Please unplug the network cable
35. finished please press Save key Normal Motion Alarm Setup the record type it can be single selected or multi selected 42 H 264 Network DVR Copy setting to the following channel Copy the setup to all channels realizes the same record establishment A Note Users should save each channels separately after setup complete 6 4 PTZ Setup Main Menu System PTZ Setup Figure 6 5 CHANNELOT O Pelco_D S600bps F 1 w NONE x Figure 6 5 Channel Choose the channel to connect on the speed dome camera ALL means all channels DEV Address Setup the address of speed dome cameras The numerical range 0 255 43 H 264 Network DVR Note The address must be consistent with the speed dome cameras or DVR can t control the cameras Protocol Choose the corresponding control protocol Pelco_P Pelco_D the default is Pelco_D Baud Rate Choose baud rate of the corresponding speed dome cameras it can control the corresponding channel s PTZ and cameras the scope is 1200 115200 the default is 9600 Data Bit From 5 to 8 the default is 8 Stop Bit 1 2 the default is 1 Check None odd parity Even Parity default is none Flow Control None Xon Xoff the hardware the default is None Copy setting to the following channel Copy the setup to all channels realizes the same PTZ establishment x Note Users should save each channels PTZ parameter separately after setup complete 6 5 Network Set
36. hannel name will change 8 3 Control Click the Control on right side of screen come out the dialog Figure 8 11 Please select a server meq 192 168 0 EE met 192 168 0 155 Figure 8 11 2 74 H 264 Network DVR Select the required Server to Status control 8 3 1 Common Control server reboot Shut down server Control server shut down Remote upgrade Open the local upgrade procedures will start upgrade if the upgrade files are ready 74 H 264 Network DVR Status control Common Video Log Download Reboot server Shut down server Remote upgrade Figure 8 12 8 3 2 Video Remote adjust the parameter of brightness color contrast saturation of video in order to achieve the best video effect 75 H 264 Network DVR Status control Common Video Log Download All Channel Brightness Chroma Contrast Saturation Figure 8 13 8 3 3 Alarm Customer can choose the alarm input port that he needs Figure 8 14 76 H 264 Network DVR Status control Common Video Alarm Log Download V Alarm output 1 M Alarm output 2 Alarm output 3 M Alarm output 4 Figure 8 14 8 3 4 Log Customer can remote view the log on digital video recorder Figure 8 15 71 H 264 Network DVR Status control Common Video Log Download Start time 2009 3 10 0 00 00 Log type 411 log Figure 8 15 Start time end time choose the
37. ick the right button of mouse at the soft keyboard you can close the soft keyboard Click the right button of mouse at any place except the label edit box and buttons you can close the current window Execute the special operations of the window lf user double click at any items of the recording file list it will playback the file directly Double click the left button of mouse to enlarge the video window to full screen or restore it to multi screens When at the PTZ control mode double click the left button of mouse at the screen centre to enlarge the screen or restore it to multi screens Adjust the numbers Flip list box up and down Contol the lens zoom at the Contol the lens zoom at the PTZ operation mode Contol the lens zoom at the PTZ operation mode mode Mouse dra Hold down the left button of mouse to drag to the lower right E corner to select the motion detection area hold down the right Left double click H 264 Network DVR button of mouse to drag to the lower right corner to cancel the selected area Drag the play progress bar forwardly or backwardly to adjust the location of the current record displaying drag the slider forwardly or backwardly to adjust the parameter 2 2 Remote Control Operation Users can use the remote controller to control DVR the remote control keys are distributed as follows H 264 Network DVR E FEA E 00000 ay tan eeee ae lo a LILI LR i N
38. ing off power switch When the DVR is running you can shutdown it directly by the power switch of the back panel should try to avoid especially when it is recording B Unplug the power cable directly When the DVR is running you can shutdown it directly by unpluging the power cable should try to avoid especially when it is recording Note In some circumstances the power supply is abnormal DVR will lead to not work properly even DVR will be damaged In such circumstances we recommend user to use the regulated power supply 3 2 Login How to enter the menu mode 16 H 264 Network DVR Click the right button of mouse and select menu to enter the main menu interface Click the Search shortcut key enter into the playback interface Click the REC shortcut key enter into manual record interface Click PTZ shortcut key enter into the PTZ control interface There are three default users of the system they are admin user default the users of the system can not be removed The initial password of user admin is 666 666 which is the highest authority user it can carry out all operations the initial password of user user is 123456 which can record playback backup and set parameters etc but it can not add new users or upgrade systems the user default has been defaulted when it leave factory which is a lowest authority user only have monitoring authority Figure 3 4 _ CONFIRM IA CANCEL Figure 3 4
39. nload signed Actives controls Disable Enable O Prompt 16 Download unsigned Actives controls EU mie Lil Reset custom settings Figure 8 2 ActiveX controls and plug ins installed ActiveX controls automatically prompt to the marked safe for scripting of ActiveX controls to execute script not marked as safe for the ActiveX controls Initialize and script Binary and script behaviors Binary and script behaviors Download signed ActiveX controls Run ActiveX controls and plug ins The above categories will be Enable which is very important Note Install ActiveX please close firewall and antivirus software SS SN NS NS 64 H 264 Network DVR 8 1 2 Connection Settings DVR through the remote access network local area network connection the client computer s IP address must be with the DVR at the same network segment in the wide area network connection through the dynamic IP address or domain name to connect when the two sides need to ensure that public network can access it The following introduces the method of local area network connection settings 1 right click My Network Places in the pop up menu click on Properties open Network Connections 2 Double click open the Local Area Connection Figure 8 3 Local Area Connection Status FIX General Support Connection Status Connected Durations 02 04 35 Speed 100 0 Mbps Activity Sent e sl Recelved gt aa Packets 36 211 35 952 Figur
40. nnnnnnnnnnnnnnnnnnrnnnnonnnnnnnananenanos 90 Appendix C Alarm Output Interface Instruction rcs oie pen oad dde dey doen distin donde ved sunieswondenesepnduae senuduae jenesncsdenedeoydeundeouowon dep eduensuyedoensusesennsuenseee 92 H 264 Network DVR Caution and Preventive Tips Power Supply This recorders work at 12V DC power supply please confirm the power supply voltage before use Please shut down the power if you don t use it for a long time and pull the plug out the socket Safety This machine is indoor equipment in order to prevent the risk of short circuit or electrics shock don t put it on the rain or humid environment In case of any solid or liquid into the DVR please cut off the power at once don t open it until the qualified technician examined It is delicate machine it is too difficult to repair it by user themselves If there is any problems please ask the qualified technician to examine or contact the distributor Installation DVR should be installed at horizontal place DVR shell should be grounded Make sure the hard disk is installed before the initial using Avoid opening the case or replacing the hard disk under the power state Recommend using the high speed hard disk of 7200 transgenic s or above Please select the appropriate installation place so that the air can flow free in order to prevent the machine overheating The machine mustn t be installed in those areas that near the heat sour
41. or prohibit ALARM CONTROL USER ACCOUNT EXCEPTION Selection of buzzer and alarm output when system is abnormal SOFT Paes ADE Selection of the functions that require maintenance upgrade system software VGA ADJUST ADJUST Regulations of the VGA and audio output parameters ADVANCE RESTORE According to the selection the users can set the whole or part of the parameters back to default but not including the user account Backup designated video files to the backup device Add delete or modify user access or user password FILE BACKUP Cancellation of the current user and the next operation needs input a password Close stop or restart DVR EXIT 95 H 264 Network DVR 4 2 Menu Operation Menu Figure 4 1 p SYSTEM INFO SYSTEM SETUP Cis REC CONTROL HARD DISK ALARM CONTROL S FILE BACKUP Figure 4 1 The main menu has nine functions including playback system info system setup recording control hard disk alarm control advance file files backup and exit Explication All of the following submenu settings become effective only when have been kept in confirmation and the function is selected only when the checkboxes has filled 4 2 1 System Information Menu SYSTEM INFO Figure 4 2 The system information includes hard disk log version and net user 26 H 264 Network DVR VERSION Figure 4 2 2 H 264 Network DVR 1 Disk
42. output 1 4 8 9 multi screen monitor Display the real time video stream and how many resources be occupied per hour Through the channel marks to prompt the channel status such as recording motion detection video loss video block alarm trigger etc Support search the system logs local Video compression format H 264 8channel video and audio input keep video and audio synchronization stablely Multi tasking operations lt can achieve not only realtime recording independently each channel but also searching and Network Functions Built in four SATA interfaces max support 4pcs hard disk The hard disk file including cycle coverage records and non cycle records Adopt special format to store data so the data can t be tampered and ensure the data security Through USB interface such as USB disk and movable hard disk etc to back up Support DVD W to back up The client computer can download the file on your hard disk through network to backup Remote monitoring through network PTZ control Recording files search and playback Playback PTZ Control playback for single channel four channels remote monitoring record searching and downloading Multi recording modes manual time schedule alarm linkage motion detection etc Support preview User can playback the recording files of DVR through network lt can achieve to search recording files fast and search the recording file as types Multi play
43. owing channel Copy the setup to all channels realizes the same encoding setup A Note When the code flow control set to dynamic bit rate Stream Rate expressed the upper limit value 6 3 Recording Setup Main Menu System Recording Setup Figure 6 4 The DVR default recording schedule is 24 hours continuously lt can be setup according to the schedule request for example record the video as the type and time set 41 H 264 Network DVR RECORDING SETUP OVER R ITE 60 CHANNELOT MON 24 24 24 24 Figure 6 4 It s including the schedule setup of normal video record motion detect record and alarm record Disk Full How to deal with when the video recording hard disk is full Over write mens system will cover the earliest video recording document and continue to record stop video recording means system will stop the current video recording Duration The automatic production video recording document time gap the scope is 5 120 minutes Channel Schedule Drop down menu Choose the corresponding channel number week to carry on the establishment Click ALL to choose all channels Alarm Pre record Record the video before alarm happened it s around 5 seconds time Time section Express the record type of current channel there are four time section options It can be the same record type in different time sections The time scope is 00 00 24 00 After each channel parameter establishment
44. previewing status Enter into the list box selection status and confirm your selection Select Cancel the status of the check box H 264 Network DVR CHARP 3 Basic Operations 3 1 Power on Shut down 3 1 1 Power on 4 if the POWER mark lighting is out please operate as follows First If the power does not plug please plug in the power the DVR will start if the DVR won t start please enter the next step Second Open the power switch of the DVR it will start lfithe POWER mark light is red just please press the POWER key to start the DVR After started the DVR the video output is the default multi screen output mode if the start up time is in the recording time which have been setted before the system will automatically start recording function If you didn t install hard disk before start the DVR after you entered into the system it will prompte as follows Figure 3 1 NFORMAT ON HARD DISK DRIVE NOT DETECTED CONF RM Figure 3 1 3 1 2 Shut down Right ways A Hold down the POWER button about 3 seconds and confirm to shut down the system and stop all the work of DVR Figure 3 2 H 264 Network DVR FORMAT ON CONFIRM SHUTDOWN SYSTEM NO Figure 3 2 B Enter into menu then select Shutdown system in exit system menu Figure 3 3 EXIT SYSTEM LOGOUT LOGOUT SHUTDOWN SYSTEM i le REBOOT SYSTEM Figure 3 3 Non normal shut down should try to avoid A By turn
45. ral standalone DVR The remote controller ID should be the same as DVR ID or it can t work Video System Video system PAL and NTSC options must restart the DVR after revising 39 H 264 Network DVR A Note Stop current video recording before setting system time 6 2 Encoding Setup Main Menu System Setup Encoding Setup Figure 6 3 ENCODING SETUP CHANNELO1 IDEO CIF CER GOOD Figure 6 3 Channel Choose the channel needs to be setup ALL means all channels Encode Type There are two options one is Audio amp Video stream and the other is Video stream only If you want to record video and audio please select Audio amp Video option otherwise you can select Video option to record only video Encode Size CIF 40 H 264 Network DVR Stream Control The option of variable rate and fixed rate Encode Quality 6 grades of the picture quality The best very good good In general poor bad Stream Rate Encode rate options the higher rate the higher picture quality and the more HDD space will be occupied Frame Rate 1 25 seconds PAL or 1 30 seconds NTSC continuously adjustable Time Display Title Display Each channel may superimpose the time and the channel title Click Setup and drag the time title or channel title to appropriate place then setup complete The video will diaply the time and channel information when playback Copy setting to the foll
46. s operation only removes the backup file lists but not deleting the files BACKUP Backup all the files of the list box to specified backup device Please check the equipment if the space is large enough when select a backup device According to the passage time or information retrieval type the user can search for some useful files and the information of these files will be displayed in the list box The user can also select multiple files for backup After the add operation the backup files will be displayed in files backup files list RECORDING SEARCH Figure 3 10 Backup retrieval During the procedure of backup the figure at the right bottom will show the current completed progress Users can view the backup video files and the files always have a kind of format Channel number year month day lvf 93 H 264 Network DVR NOTE In the process of backup the figures at the bottom will display the real time progress So users can do some other operations before the system automatically giving a suggestion CHARP 4 Menu Operation 4 1 Menu Preview Realizing video searching and playback The search operations could be carried out according to the type channel and time The results will display in the list PLAY BACK N common video recording A alarm video recording M motion video recording HARD DISK Display ME hard disk merit including the types positions of the socket the total capacity and usable capacity
47. same time 3 Recording Search Figure 3 6 START TIME END TIME SEARCH TYPE RECORDING SEARCH 2009 06 10 OO OO OO 23 38 33 FILE SELECT ALL SEARCH DATE The record date of the files that you want to search PLAY TYPE Playback according to the file or according to time Select the file type that you want to search there are ALL TIME ALARM MOTION for options SEARCH CHANNEL 8channles can be selected H 264 Network DVR The recording time period of the file that you want to search start time should be less than end time PLAY Select the file that you want to play in the search list click PLAY button or double click the file that you want to playback directly PLAY TOGETHER Select the search date start time end time and the channels that you want to playback click PLAY button to play H 264 Network DVR 4 Play Control Strip Figure 3 7 Figure3 8 Descriptions Da 4 GE Figure 3 7 Fast Playback Figure 3 8 Advanced Playback Euron Descriptions Button Descriptions Button Descriptions From fast play slowly play to Fast play d Mute normal Single screen FF Volume File model Four screen m Full screen Exit L Xi model multi screens 1 The speed channel time and process will be showed in playback control panel 2 The playback control is effective for all channels when the videos are played according to precise time However the play con
48. t ea eter 33 DONE OM eeen E E E E E E E E A E EE E EEE 33 A cuannsalxcaisysesanessmaiayasdacescuanuaacxcnninsisuees no saateconnmasnaaeseanisessccsuanouuate 35 o mE ann Ee mE Se Cn SC a SS or nC OE en ee nC ee ee Eee Ce 35 H 264 Network DVR A A o ae ee eee eee eee er 35 S4 2 NO aN ET A ME PRE PO O CE E PE PE O O E T E S 36 CHARP 6 System SO UD aa 38 SS NN 38 io A e oO A 41 Sec A LA APS 101 AE TT TT TT TT T 43 Main Menu System PTZ Setup Figure 6 5 nana RR RR RR RR RR IRENE RR RR RR RR Rnnnnnnrrnnnnenns 43 DONE NO SCI Dre dls 44 6 6 AMAS UD A A AAA AA AAA AA a tea aan ai 46 Main Menu System Alarm Setup Figure 6 8 c cccccccccecececceeeeeaeeeesssesseeeeeeeeeeeeeeeeeeeeaaaaueasaaseeeeeeeeseeeceeseeeeaaaaaaaasedeeeeeeeeeeeeeeessnsaeaaaags 46 AA nen ne Eee ee eate eer A meer ererererncr rent tetera er erererern cnr rne 48 TW SCE ACCOUN iaa caia aaa 55 Le EXCCpllON acca aaa a aa aa D nn nn nn SN ENT 58 AS evict ecm et Tt a a a a a a a a a 59 TOMAS e CO E E EEE 61 CHARP 8 Remote Network Control and Management cooncocnconnnonononoconoconoconoconcconccoanenanenanenanenaso 62 81 R mole Sens anni AAA AAA Ia 62 8 151 NEINEI SCC USCI O S eee ee eee de NT A OEEO 62 8 12 Connection SOS ER a aa ne Da D OO de date Da D Ce a da dose Di D 0 65 OS ACUNE DOWN AUS taladrar iii D on ol 68 AA CONE O Po AO ONE oO ne ten a ne Wr aoe
49. ting Video Detect Video Loss Video Blind Please refer to relative content of Chapter 4 System Setup 82 H 264 Network DVR 8 5 Toolbar Introduction e Gale AECI Ib ota lo gt l E ai T y Current 00 00 02 Start Pause Stop Low speed High speed Capture Record Playback Volume control Total time Current time single frame forward 8 5 1 Real time Preview Control After successful login the server users can remote preview DVR images in real time Select a unused window and click the Start button the System will pop up the channel connection selection box The highlighted channel shows that at present it has been in a preview state lt can save the real time preview video to the specified recording directory if click recording button it can stop the preview of this winder if click stop button Point recording button can be saved in real time video preview to the local directory specified in the video Point to stop button can stop the previewing of this window 83 H 264 Network DVR Please select a channel i Channel i Channel Ch Channel Channel p Channel Channel Ch Channel Channel 01 02 03 0d 05 D6 UT Ds 4 192 168 0 155 Channel Channel Channel Channel Channel Channel Channel Channel 01 02 05 014 05 06 07 D Figure 8 18 84 8 5 2 Playback User can playback the local recording files and also can remote playback the
50. trol is effective only for current channel if the video is played in elect model 3 According to time synchronization playback mode the system will automatically skip the periods which all channels have no video 4 The progress can be located through the mouse Note The volume could be controlled through VOL and VOL during playing 91 H 264 Network DVR 3 4 3 File Backup Menu FILE BACKUP Figure 3 9 The files backup of DVR could be carried out through DVD burners USB storage equipment network downloaded etc Here introduces operations of DVR backup and the explanations of network backup refer to chapter 8 remote network control and management FILE BACKUP gt lt 2009 02 12 06 1 Bae A S a E 5 2009 02 12 06 Figure 3 9 DETECT If the system has connected to the backup device Click this button the list box will displays the type partition capacity and other information of the device New equipment needs another detection REMOVE Click remove button the backup device has downloaded will be loaded safely STOP Suspend the backup task but the task of DVD burner model cannot stop halfway ADD Search for the files which need for backup _ 29 H 264 Network DVR CLR SEL Remove single or multiple backup files which have selected in the list box This operation only removes the backup file lists but not deleting the files CLR ALL Remove all the backup files of the list box Thi
51. up Main Menu System Network Setup Figure 6 6 44 H 264 Network DVR ETHERNET IP 192 168 O 117 NETMASK MT GATEWAY 192 168 O 1 DNS 0 0 0 0 SERVER PORT HTTP PORT DONS ENABLE DOMAIN MAME gt 7 conr es CT 7 OOPPPoE AUTO LINK PPPoE IP 0 0 0 0 DIAL UP ACCOUNT 0 EEES Ll exir Figure 6 6 Ethernet IP Change the IP address parameter from the numeric keyboard or the soft keyboard IP address can only be changed in this option Netmask Setup the IP network mask address Physical address Setup the physical address of network card the digital input is the hexadecimal system Figure 6 7 Figure 6 7 Gateway Setup the gateway IP address 45 H 264 Network DVR DNS Setup DNS server IP address Server Port The default is 7777 may change it according to the user actual need and it will be effective after restart the system HTTP port Default is 80 after the revision restart the system and it will be effective lf the port has been changed it must display the selected HTTP port such as http 192 168 0 117 1234 DDNS Enable Pass the dynamic domain name analysis server Supports 3322 free dynamic domain name analysis Register account at http www 3322 0rg PPPoE Auto Link Input ISP Internet service provider provided PPPoE user name and password Click Dial UP then starts to connect After connecting successfully PPPoE IP will display the automatic
Download Pdf Manuals
Related Search