Scanner Console User`s Manual
Contents
1. In program state use it to choose editing program number and scanner In running state use it to choose running program number Display the console state and setting values 6 Speed Adjust running speed of a chase step Adjust the gradual change cross time between chase steps O slowest 100 fastest Used in program state 8 Delete Press the key briefly to delete the current chase step Press the key over 2 seconds to delete the current chase step continually 9 lt Direction key In program state use it to check the chase step backwards In program state use it to check the chase step forwards 10 gt Direction key If the current step is the last one with press the key to add a step and copy the contents of the last step to new step Press the key over 1 second red light above blink Console is in program state Press the key over 1 second again red light off Console is in running state 3 Channels Level 4 Number keys Cross 11 Program sg r Q O Rear of Action 96 APS a bd DMX signal output socket power socket power fuse Information of LCD display Display contents Detail explanation Standby Press Standby key red light on It is standby state blackout On line Press Standby key red light off It is running state Select Chase Please select program chase to run Chase xxx The number of current chase Step xx The number of current chase step2. Display when the Speed slider is adjusted Xxx range 000 100 000 slowest 100 fastest Display when the Cross slider is adjusted Xxx range 000 100 000 slowest 100 fastest Speed xxx Cross xxx Step is empty Current chase has no content It is empty PROGRAM After pressing Program key over 1 second to program state please Select chase select a program chase number PROG CHASE XXX The number of current editing program chase Step xxx indicates the step is the last one Note xxx is number Control scanner running 1 2 3 Just use parts of panel to control scanner running Press 1 12 number key to select the number of scanner program chase If the program chase of corresponding number has not been edited press the number key and the green light is not on Use Speed slider to control the running speed of current chase the console will keep the running speed of every chase 0 slowest 100 fastest Use Cross slider to control the gradual change cross time the console will keep the cross time of every chase 0 slowest 100 fastest Two states of Standby key When red light is on console is in standby state blackout When red light is off console is in running state Action 96 scanner console has data auto save function When the console is turned off or the power supply is broken off it can save the last running state When it is turned on or the power su
3. step 001 has been copied to step 002 automatically Functions of Delete key The key can only be used in program state Press the key briefly the editing chase step is deleted Press the key over 2 seconds the current chase step is deleted quickly When all the chase steps are deleted the current chase is empty Tips of program After finishing current program quit from the program state Then go into program state again to edit another program Pay attention to the use of gt key and understand how to use it correctly Otherwise unwanted useless or black chase step is appended A program just with one step can be edited to use as scanner fixed scene In program state Speed and Cross are not need to set They are set directly in program running state and saved automatically Sketch map of program operation D Into program state Press Program key over 1 second 2 Select program No Use number key to select program No Select chase step Use lt gt key to select chase step D Select scanner Use number key to select scanner 6 Set channel level of scanner Use CH1 CHB slider to set channel level of scanner No Yes Is another scanner set No Yes Is another chase step set Quit frorn program state Press Programm key over 1 second MEMO
4. CODE ection 96 Scanner Console User s Manual Ver 1 02 CODE ELECTRONIC CO LTD CODE Action 96 scanner console adopts international universal DMX512 digital format It can control scanners and other equipment with the same digital format Its functions are compact Its convenient and flexible characteristics made it be handled very easily Action 96 is the best suit for various danceries bar and small art show Technical specification Output signal DMX512 DMX control channel amount 1 96 Control scanner amount 12 Maximum control channel amount of a scanner 8 Scanner chase 12 Maximum chase steps in a chase 50 Total chase steps 600 Chase step time 0 25 60s step Chase gradual change ratio Cross 0 100 Display mode Backlight LCD screen and LED indicator DMX signal output connector XLR D3F Data auto saves Values auto save for various chase speed and gradual change Power supply AC 100 240V 50 60Hz Size 482mm x 177mm x 65mm Weight 2 9Kg Other functions Cautions for safe use e Action 96 scanner console must be connected to the earth line to ensure the safety e When Action 96 scanner console and scanners are working don t plug or pull out DMX512 data cable This will destroy the port electric components of the console e Don t splash any liquid to the scanner console This will shatter the inside components of the console and make functions failure Scanner console is precision electric equipmen
5. pply is normal it runs from stop point Scanner chase edit No A A Press Program key over 1 second the console is in program state Use number key to select editing chase number Use gt lt key change the current chase step If the current step is the last one it has a on the screen Use number key to select editing scanner number Adjust CH1 CH8 slider to set various channel value of scanner Repeat 4 5 steps to set channel value of other scanner Use gt key to next chase step If the current step is the last one with it copy the contents of current step to the new one automatically Repeat 4 6 steps to edit other steps Press Program key over 1 second quit from the program state Repeat 1 8 steps to edit other chases Functions of gt keys They can only be used in program state 1 Use key to check the light effect of edited chase step 2 Insert and copy functions of key with example If current chase has not been edited LCD screen will display Step is empty when the console go into program state Press key to insert a new step the screen display Step 001 It indicates the number of current step 001 and it is the last step After setting various channel values of every scanner in Step 001 press gt key A new chase step 002 is inserted and the screen display Step 002 It indicates that step 002 is the last one and the contents of
6. ster to No 2 and 3 connections of XLR port and then plug the port to the last scanner or the socket of other equipment Distribution of DMX512 address Action 96 scanner console uses 1 96 channels of DMX512 to transmit the control signals to various scanners Each scanner is distributed with 8 control channels First DMX address of scanner Scanner No Switch bit of scanner address 123456789 1 100000000 2 9 100100000 3 100010000 4 100110000 5 100001000 6 100101000 7 100011000 8 100111000 9 65 100000100 10 100100100 11 100010100 12 100001100 1 scanner 2 scanner 3 scanner 11 scanner 12 scanner N rn Aa Te sa 1 8 9 16 17 24 81 88 89 96 DMX LI channels 12 scanners with 8 channels each Sketch map of system connection 120 Ohm terminal matching resister 12 scanner DMX Addr 89 4 scanner DMX Addr 25 3 scanner DMX Addr 17 2 scanner DMX Addr 9 1 scanner DMX Addr 1 Action 96 Scanner Console 12 scanners Introduction of the panel O No Functions and purposes 1 Power Switch of AC power of the controller The key state is indicated by the red light above 2 Blackout Red light on console is in standby state blackout Red light off console is in running state In program state move the slider can change the corresponding channel value of specified scanner The number key group has multi functions
7. t Please pay attention to moisture proof protection and dust proof protection And please clean the control panel in schedule Installation of the console Contents in Action 96 scanner console package e Action 96 scanner console Power adapter and DMX output XLR D3F e User s Manual Action 96 scanner console adopts international standard 19 4U installing structure It can be infixed in operation board or directly installed in 19 shelf or cabinet When the power supply is connected please check the voltage whether is in normal range Otherwise steady voltage equipment may be needed Connect to scanner According to DMX512 standard 1200 screened twist cable must be chosen as data cable between every equipment In practical engineering installation if the whole length of the cable is short the cable may be replaced by high quality screened two core microphone cable When the cable is joined to the XLR port No 1 connection of the XLR port is connected to the screen net of LJ the cable Twist lines distinguished by different colors are connected to No 2 and 3 connections No 3 connection is connected to the positive of signal No 2 connection is connected to the negative of signal Don t connect a port in reverse In DMX signal transmission a 120 terminal matching resister must be connected in the last equipment This can absorb the signal reflection at the end of cable The operation is as following connect a 120 2 resi
Download Pdf Manuals
Related Search