Home

JOY HD - Smart Electronic

1. Antenna Setup 01 11 01 07 5 Select the menu item Center Freq to set the frequency corresponding to the IF channel see allocation table 6 Select the menu item Sat Position to set the respective satellite posi tion 7 Mark the button Save and press OK to save your entries and to return to the first window Antenna Setup or mark the button Cancel and press OK to discard any previous entries in this window and to return to the first window Antenna Setup without saving smart JOY HD 65 Cleaning 8 Press the red function key to open the window Antenna 1 MH 2 ldem Setup Center Freq gt Doue 1420 MHZ 5 1516 MHZ 1632 MHZ 9 Select the channels using the keys 4 PR and w PR up to 12 depending on your system and insert for each the frequency accord ing to the table above using the keys b U or V A or numeric keys of the remote control 10 Mark the button Save and press OK to save your entries and to return to the first window Antenna Setup or mark the button Cancel and press OK to discard any previous entries in this window and to return to the first window Antenna Setup without saving 11 Leave the menu by pressing EXIT settings will be saved RAPS installation will be continued automatically 9 Cleaning WARNING CAUTION 66 There is the risk of electric shock when clean ing the receiver Always disconnect mains plug from power
2. Select the field New Password Enter anew password Go to the field Confirm Password Again enter the new password 4 Press OK to save your changes and to leave the sub menu 5 Leave the menu by pressing EXIT until the screen shows the TV pic ture Instead of completely leaving the menu you can also er further stay in the menu or in the sub menu to per form further settings J 7 Set Time Convenient operation of the smart JOY HD requires setting of system time By default the receiver is set to GMT Usage i e date and time are taken from the received signal Time zone is set to GMT 1 hour 1 00 by default Required changes can be made in the sub menu Time 1 Select the menu System Setup see above 2 Select the sub menu Time and confirm by pressing OK 6 GMT Greenwich Mean Time smart JOY HD 27 Basic Operation 3 Select the item GMT Usage and switch on or off GMT Usage by using the keys 4 L or 4 On automatic time setting via satellite signal is activated Off automatic time setting via satellite signal is deactivated Ez It s recommended to keep the presetting GMT Usage C 4 Select the item GMT and select your time zone by using the keys b D or 4 for example the time zone of Germany Austria and Switzerland is GMT 1 00 5 Select the item Summer Time and switch Summer Time O for On by using the keys P C or 4 2 Please verify the presetting and correc
3. KJ gt Dp X 0 FAV EPG EXIT x V MODE PAGE PAGE A wv smart JOY HD Product Description Display information on current channel Display hide teletext Red function key Switch of previously selected channels Yellow function key Selection of audio format Switch between TV and radio mode Not used Play media player Fast rewinding Fast forwarding Mute Select playback format of media player Call list of favorites Call of EPG Electronic Program Guide Exit menu or menu item Green function key Blue function key Switch aspect mode 10 entries up in menu channel list 10 entries down in menu channel list Stop playback Pause playback Slow forwarding slow motion Slow rewinding 13 General Safety Instructions 24 Save Energy The receiver smart JOY HD is equipped with particularly energy saving electric and electronic components Furthermore a sophisticated energy management helps to save energy Thus energy consumption during Save Energy Standby Mode is reduced to less than 0 5 Watt 2 5 Guarantee The warranty of the HDTV satellite receiver smart JOY HD of smart elec tronic GmbH corresponds to the legal regulations at the time of purchase 3 General Safety instructions 3 1 Intended Use The HDTV satellite receiver smart JOY HD is intended for private receiving of digital satellite television DVB S It is exclusively intended for such purpose and must be used exclusive
4. e The device is not used in accordance with the user manual e The device is used out of the field of application as described above e The operator performs unauthorized changes of the device 4 Installation of smart JOY HD gt First connect the receiver to the satellite antenna and any other devices before connecting the mains plug to the power outlet gt Please also note the user manuals of the other devic es CAUTION 2 VDE Verband der Elektrotechnik Elektronik Informationstechnik German Association for Electrical Electronic amp Information Technologies DIN EN 60728 11 VDE 0855 1 2011 06 Cable networks for television signals sound sig nals and interactive services Part 11 Safety 16 smart JOY HD Installation of smart JOY HD 41 Connection Scheme default connection EE optional connection 42 Connect Satellite Antenna gt Connect the antenna cable to the receiver connection LNB IN Further receivers can be connected at the connection LNB OUT The signal is looped through from input LNB IN 43 Connect TV Set As stated in the connection scheme the smart JOY HD offers various possibilities to connect TV set and receiver The possibilities applicable to you depend on the connection possibilities of your TV set smart JOY HD 17 Installation of smart JOY HD Am Fernsehgerat ist ein HDMI Am Fernsehgerat ist kein HDMI Anschluss vorhanden Anschluss vorhanden 1 fi
5. 5 3 Select Operation Mode cccccseseecssseecceseecseseeceuseecsaeees 25 5 4 Gall Eeave MOFIU adco cocto ue eve Nox Ra e eer equa epi e qu eeu 25 5 5 Menu Navigatio sense e a ES 26 5 6 Paremal LOCK ainera A 26 5 7 SEF MIS oea a a r Cumas COE Ro DO Reamer 27 5 8 TY atse a ee ea O ET 28 5 8 1 Direct Channel Selecon ra 29 5 8 2 Channel Selection via Selection Window 30 5 8 3 Channel Selection via Search Function 30 spore NEM ADM Slug eT 31 KOSA ACME FIET usc ciiasdvt icto a tpe Dii a fut Out odio ie 31 5 8 3 3 Find Channels by Alphabet eessseeesss 32 5 8 3 4 Sort Channel List by Alphabet 33 5 8 4 mie ieeateaneneens 33 5 8 5 utrum 33 VOl oN ERG uices nupepeuc utvesUs anatase ue wie Y Rus upecu uM abe DuUC PURUS ies 34 Snc ME Com a A 35 5 8 6 AUCIO SOLUS idea eiae R teca ulcus ibtd edis 36 5 8 7 Foletto Danaea O 37 5 8 8 ASDeCUNIOGIG 2 atico E E 37 5 9 hannes IDformallottsssu e eer preste cieiieieieieetreneeeneees 38 6 Extended Settings and Functions 38 6 1 Menu Edit GBanrels sushi xvi iit qeat uto deebutetsen s Eventus tn rt 38 6 1 1 TV Channel List Radio Channel List 38 6 1 1 1 Add Channel to Favorites eeeeeeeereennne 39 4 smart JOY HD 6 1 1 2 6 1 1 3
6. 6 1 1 4 6 1 1 5 6 1 1 6 6 1 2 6 1 3 6 2 6 2 1 6 2 2 6 2 3 6 2 3 1 6 2 3 2 6 2 4 6 2 5 6 3 6 3 1 6 3 2 6 3 3 6 3 4 6 3 4 1 6 3 4 2 6 3 5 6 3 5 1 6 3 5 2 6 3 5 3 6 3 6 6 4 6 4 1 6 4 2 6 4 3 6 4 4 smart JOY HD User Information Provide Channels with Password Protection Lock Against Unauthorized Access eesesseeeseeeeeeee 39 okip Channels when Switching from Channel to Channel Zappy ssns ecol vacuo taches eae doe de 40 Move Channels to Another Channel Position 40 Rename Channels asumira aa a 41 Delete Individual Channels from Channel List 42 Delete All veteres vac ep utem M ep E i DU 42 glo dcc TT 42 Menu Installation eeeeseeeeeeereenee nnn 43 Antenna Connection cseeesssseseeeeeeeen nnne nnns 43 ate llte I sut icit tette iE timeri Mh else ten aee 44 Antenna o6 tUD oasen tomen dava veux VE Vu UR cau Uia 45 Fixed Antenbia s esee bii p n vio Ee m t des pr votre bue x 45 MOLO ANTENNA vetiautv tena Dae voe Ete eit dt vue uoo us 47 wlgejxeril c PM 49 ilerum E 50 Menu System Setup cccccccccsseeccsseeeceseeeceseeceseeeceeseessaaees 50 ecc em PE o0 DICED MIME P a 53 Bar MuR Res T 53 OOD SOU ING keit auute vxo cadet cuneta ide enti etae uitam cesta Ce vede net 55 FUG SSO SID uneen aa e T aE 55 OSD Trans Pare nCy aieri A 55 Gai tu ES 55 LNB
7. HDMI TV gt Connect TV set and receiver by gt Connect TV set and receiver by using an HDMI cable using a SCART cable gt f your TV set offers both possibilities then always choose connection via HDMI cable This ensures best possible audio and video quality with digital signals 44 Connect Home Cinema System Optional To improve audio playback you can connect to the smart JOY HD addi tionally to the TV set also a multichannel home cinema system or a hi fi system There are various possibilities for connection Your type of con nection depends on the connection possibilities of your home cinema system a Your home cinema system is able to loop Receiver through an HDMI signal i e HDMI connec tion for receiver and HDMI connection for HDMI TV set TV set gt Connect the home cinema system and the receiver by using an HDMI cable as well as HDMI home cinema system and TV set by using an HDMI cable 18 smart JOY HD Installation of smart JOY HD Your home cinema system can process digital audio data connection for digital DIGITAL AUDIO data is pre sent e gt Connect the home cinema system and the re ceiver by using a RCA cable gt f your home cinema system hi fi system supports HDMI connection then use such connection This ensures best possible audio and video quality with digital signals 45 Connect Data Storage Optional gt Connect a data storage USB stick or hard drive
8. SUDDIY VONAGE uiv i oui Iur Delta a 55 Automatic Standby Function iess a 56 Simultaneous Playback of Picture and Sound 56 RAPS OV SIC cain tociens E coe Uster osa Ere ond 56 Men FOOlS aiae cu eieiatenveuselimnediuencuientaseas 56 SOTtwatre V CFSION etes diodes tep yd e poete ppp am ir eas 56 Facto SENGS tc r 57 DISDIAY SENNO EAR ETE adel eect deeioatdet uel 57 Update of the Receiver Software esee 57 5 Table of Contents 10 11 12 13 6 4 4 1 Software Update via Satellite 57 644 2 Update Via USB risia aide duck xiu ecc ee odd eeu 58 MCC a PIA eR e TE 59 1 1 Igi eme HR 60 7 1 1 Rav DIOK CRP ener ner EET 60 7 1 2 miii DS 60 TAZ Creating a Playlisten cient oka vetas pex des ue eis 60 7 1 2 2 Moving files within the Playlist seesssssssss 61 7 1 2 3 Delete files from the Playlist 61 7 1 2 4 Delete all files from the Playlist 61 7 1 3 EGIEAUGIO FIGS e nl 61 7 1 4 DORE AUGIOF ES i cielos heiter todides eed ius ts ie ve 2 Edna oai ce ens 62 7 1 5 miVjerle deo C 62 7 2 WEG SS eer pcc Pr 62 7 2 1 Configure a Slide SNOW ccccceccseseeeceeeeeeeeeeeeeeeneeeeeenseses 62 7 2 2 Showing all Images in the Current Directory 63 1 3 NSO c 6
9. Media Player and to return to the menu Record 72 Images The basic steps with image files only slightly differ from the steps with music files automatic playback of a number of images The differences are included in the functions available by pressing the keys 2 and 3 7 2 1 Configure a Slide Show Press the key 2 to configure a slide show 1 Select Slide Show Time by using the keys 4 PR and w PR 2 Using the keys b U and 4 select the time period between displaying of two subsequent images 1 to 9 seconds When selecting Off the first selected image will be continuously dis played on the screen 62 smart JOY HD Media Player 3 Select Slide Show Repeat b using the keys 4 PR and w PR to determine by using the keys L and it the slide show should start again from the beginning after displaying the last image 4 Select the line Save Cancel by using the keys PR and w PR and then use the keys P C and 4 to determine if the settings should be saved or discarded and confirm by pressing OK You will be directed back to the image list 1 2 2 Showing all Images in the Current Directory gt Press key 3 to display all images in the current directory You can also have images being displayed whilst music Ez is being played e g by changing the file type during playback of music using key 0 and then starting a slide show 1 3 Video 7 3 1 Playback Video 1 Select
10. Now it is being checked if the software currently installed on the re ceiver is up to date If it is not up to date then the current software version will be downloaded via satellite and installed onto the receiver After end of installation you will be asked if the update should be saved 3 Select the option Yes to accept the update The satellite update may take up to one hour Do not switch off the receiver during such period 6 4 4 2 Update via USB 1 Search for the upgrade file on the internet page www smart electronic de menu item Support and save it to a USB data storage 2 Unpack the file with the ending abs and copy it to the USB data stor age Please note that the upgrade file abs is copied direct ly to the root directory of the USB data storage no subdirectory 58 smart JOY HD Media Player 3 Connect the data storage to your receiver 4 Inthe menu Tools select the sub menu Upgrade by USB and press the OK key 5 At Upgrade Mode select the upgrade mode Allcode by using the keys gt Ct and 4 6 At Upgrade File select the file copied in step 2 7 Select the Start button and confirm by pressing OK The message on the right will be displayed Factory Setting El 21 04 15 52 The upgrade will be performed after selecting OK by using the keys P U and 4 and pressing OK Then the receiver will automati cally perform new start 7 Media Player The menu Media is divid
11. P and 4 2 and confirm your selection by pressing OK You will be directed back to the satellite list Press EXIT to leave the submenu Satellite List Press EXIT to leave the menu Installation and to return to TV opera tion 6 23 Antenna Setup The submenu Antenna Setup states several entries depending on your selection of Fixed Antenna or Motor Antenna Antenna Setup B 11 8509 11 25 Antenna Setup E 10 050 11 28 at Antenna Connection 6 2 3 1 Fixed Antenna gt At Satellite select the satellite to which the following settings should apply The options are limited to such satellites that are er marked in the Satellite List as such satellites from which you want to receive channels gt At LNB Freq select the value corresponding to the used LNB Alterna tively press OK select the corresponding value from the list and con firm by pressing OK smart JOY HD 45 Extended Settings and Functions Possible values LNB frequency MHz 5750 70600 Universal 9750 10550 5750 10700 Universal 9750 10600 5950 10750 Universal 9750 10700 9750 11250 Universal 9750 10750 10000 11300 Universal 9750 10600 10050 5750 5750 Unicable 9750 10600 10450 5750 5150 Unicable 10200 A universal LNB with 9750 10600 MHz is the default value You can set signal strength and signal quality for receiving of a certain transponder At Transponder select the tran sponder for
12. any time cge Set display time at OSD Timeout see section 6 3 4 page 55 Press EXIT two times to close the information window smart JOY HD 29 Basic Operation 5 8 2 Channel Selection via Selection Window 1 4 Press the OK key to display a 1 AIITV gt selection window with all availa 2 ble channels 3 3 2 ZDF HD Select the channel list with the SES SMILIES Eems desired channel by using the H keys P C or 4 7 25 1 am or 7 ProSieben Press the FAV key to select from 8 arte HD your favorite lists see p 38 9 DAS VIERTE 10 Kabel 1 4 5 6 Select the channel to be displayed 2 by using the keys 44 PR and w PR for single steps or P and P for steps of ten and confirm your selection by pressing OK The channel will be correspondingly switched Press OK or EXIT to close the selection window Channel selection window No Description Display of current channel list Marked channel Channels included in the current channel list Symbol rate of current channel in megasymbols second 1 2 3 4 Frequency of current channel example 33800 is 338 00 MHz 5 6 Polarization of current channel if Scroll bar shows position of current channel in channel list 9 8 3 Channel Selection via Search Function The channel lists can be quite comprehensive correspondingly the smart JOY HD offers various possibilities to filter the list search for channels in the list or
13. his user manual should also be enclosed when handing over the de vice to a third party e n case of loss the current version of the user manual can be down loaded at the support center on our website www smart electronic de e he software is still being further developed even after your purchase of the device Thus it may be possible that certain operation steps do not fully correspond to the user manual 8 smart JOY HD Product Description 12 Signs Symbols layout A 2 Italics bold WARNING Danger due to electric shock with possible severe bodi ly injury CAUTION Warning of possible physical damage NOTE Useful information and hints You are requested to perform an action Perform these steps in the stated order List The various possibilities of settings as well as image captions are stated in fa cs Menu windows and menu items that often include further hidden menu items or direct settings as well as the des ignations of keys are printed in bold letters 2 Product Description 2 1 cope of Delivery HDTV satellite receiver smart JOY HD remote control user manual smart JOY HD 2 batteries AAA for remote control Product Description 22 Heceiver 2 2 1 Front Panel 1 EM bop EON ESS EO pN 10 No Description A v lt OK MENU red LED green LED Display Channel Up up in the menu Channel Down down in t
14. not be blocked the receiver should have a distance of at least five centimeters to its sur rounding elements on all sides Ensure that the ventilation openings are not covered by objects such as newspapers table cloths curtains etc Only operate the receiver in moderate climate not in tropical climate Place the receiver so that the mains plug can be disconnected at any time Correspondingly disconnecting the device from the mains If the device is transported from cold to hot environ ment then condensing humidity may build up in the de S vice gt Do not connect the device but leave it switched off for some hours smart JOY HD 15 Installation of smart JOY HD 3 4 Grounding The satellite antenna must be grounded properly Note the relevant VDE regulations E smart recommends that the outdoor unit of the satellite system should be installed by a professional J 9 Handling of Batteries e Batteries should always be out of children s reach e Leaking batteries cause damage to the environment and the remote control e Batteries should not be exposed to extreme heat e g sunlight fire etc Dispose of the batteries in accordance with the applicable legal regula tions see chapter Disposal page 69 3 6 Notes on Product Liability In the following cases the intended protection of the device may be lim ited Then liability regarding function of the device correspondingly pass es over to the operator
15. outlet before cleaning Never clean the receiver using a damp cloth Always ensure that no liquid enters the receiver There is the risk of damaging the receiver when cleaning the receiver Do not use solvent containing cleaning agents like pe troleum ether or thinner Clean the housing of the receiver using a dry cloth smart JOY HD 10 Transport and Decommissioning Proceed as follows if you want to transport the receiver of if you do not want to use the receiver any more Transport and Decommissioning 1 Disconnect the receiver and all connected devices from power supply E P C tion 6 Protect the receiver from freeze 11 Troubleshooting This section includes a list of general errors that could occur with opera tion of the receiver Each error states a possible cause and solutions symptom Possible cause s Solution The display does not light No audio or video the receiver states OFF and the red LED lights up No audio or video The power cord is not connected The power switch is not switched on The receiver is in standby mode No signal or only weak signal The TV set does not The system is not cor show a picture smart JOY HD rectly connected Disconnect any cables connected to the receiver Remove the batteries from the remote control Put receiver cables and remote control into the original packaging Store the receiver and the accessory parts at a dry and d
16. table or each elementary stream in a transport stream is iden tified by a 13 bit PID PCR Program Clock Reference required to enable the decoder to perform correct presentation regarding time and speed 38 smart JOY HD Extended Settings and Functions 1 In the menu Edit Channel go E 21 040 14 57 to the sub menu TV Channel Y List 2 Press OK to open the window TV Channel List With the editing processes de scribed in the following 7 1 1 1 to 7 1 1 7 you will be respectively asked when leaving the Edit Channel menu or when changing the channel list or when selecting another function if you want to overwrite the factory set channel program list i e you may accept the performed changes OK then the channel list will be correspondingly changed or discard them Wo then the original channel list will not be changed 6 1 1 1 Add Channel to Favorites 1 Mark the corresponding channel by using the keys PR and w PR 2 Press the key FAV and confirm by pressing OK A selection window with the eight available favorite lists will open 3 Select the favorite list to which the channel is to be allocated by using the keys PR and w PR and confirm by pressing OK The re spective favorite list is correspondingly marked EA 4 The channels allocated to a group of favorites will be marked in the channel lists 0007 arte HD y 5 Press the key FAV once again or the key EXIT to leave the
17. that the setting is correct you Deuts may change your settings by correspondingly italiano pressing the keys 44 PR and w PR Portugues gt Confirm by pressing OK to go to the next Pycckun window rkce Ce The submenu Language can be accessed anytime via the menu Language 3 2 2 RAPS Start Your receiver is equipped with RAPS RAPS means Receiver Automatic Programming System RAPS can automatically update the channel lists of your receiver 20 smart JOY HD Basic Operation What is RAPS Currently the satellites Astra 19 2 and 23 5 Eutelsat Hot Bird 13 East Eurobird 9 and Turksat 42 offer a four digit number of digital TV and radio channels At delivery state of the art satellite receivers have all important channels already stored But what happens after that New and interesting chan nels are added almost weekly and there are channel changes time and again Updating the channel list with a present receiver is not quite easy for most users When performing a channel search invalid data are not deleted and usually the new channels are just added at the end of the list this requires time consuming reprogramming of the channel list The RAPS system of your JOY HD automatically performs such program ming work The window RAPS Automatic Installation is the second window of the installation process Every time you switch off your receiver RAPS checks whether there are any change
18. two operation modes TV and Radio For menu navigation you can use both the keys at the receiver as well as the remote control gt Press A PR to select the menu item above gt Press w PR to select the menu item below gt Press P C to change resp increase the selected value gt Press 4 lt to change resp decrease the selected value Instead of changing a value by using the keys moet E and 4 with many menu items you can also press the OK key select a new value from the list and con firm such value by again pressing the OK key Active menu items are color marked Although most settings for TV operation are made you can also make some further settings via the menu 9 6 Parental Lock In the sub menu Parental Lock you can lock access to certain menus by using a PIN e g for protection of your settings or block selection of cer tain channels by using a PIN Default PIN value is 0000 26 smart JOY HD Basic Operation Access the sub menu Parental Lock as follows 1 Press the MENU key 2 Select the menu System Setup 3 Select Parental Lock and confirm by pressing OK After entry of password you may set if access to the sub menus is protected by password by selecting the Menu Lock and selecting Offor On by using the keys P C or 4 2 setif certain channels are to be locked by a PIN by selecting PIN and selecting O for On by using the keys Poe or 4 or change the password
19. used any more Its objective is prevention reduction and environmentally friendly disposal of the increasing amounts of electronic waste ES KO Ud smart JOY HD Input frequency range Input impedance Input level 13 2 Remote Control Range Batteries 13 3 Mains Adapter Power consumption in standby Mains voltage 13 4 Connections Data storage interface Antenna in Service Audio out Audio Video out 13 5 Temperature Operating temperature Storage temperature 13 6 Dimensions and Weight Width Height Depth Weight 950 2150 MHz 7502 25 65 dBm up to 7 m 2 x type AAA less than 0 5 W 175 250 V 50 60 Hz USB 2 0 F socket Jack socket 1 x RCA digital audio 1 x HDMI 1 x SCART connector EURO AV 5 C to 40 C 40 C to 65 C 220 mm 40 mm 145 mm approx 0 8 kg smart JOY HD Declaration of Conformity 14 Declaration of Gonformity The company smart electronic GmbH IndustriestraBe 29 78112 St Georgen Germany herby declares that this product meets the following directives and standards e Directive on electromagnetic compatibility 2004 108 EC EN 55013 2001 A1 2003 A2 2006 EN 55020 2007 EN 61000 3 2 2006 A1 2009 A2 2009 EN 61000 3 3 2008 e Low voltage directive 2006 95 EC EN 60065 2002 A1 2006 A11 2008 A2 2010 A12 2011 smart JOY HD 71 Sic es ENJOY YOUR ENTERTAINMENT Doc ID 12041301
20. which signal strength and signal quality should be dis played at the lower window edge by using the keys P and 4 or select Transponder press OK select the desired transponder from the list und confirm by pressing OK Sequential number of selected transponder 2 102 10815 H 27500 3 102 11054 H 27500 4 102 10775 H 28000 5 102 10796 V 27500 Total number of receivable transponders Frequency MHz Polarization H horizontal V vertical an Aa WwW N Symbol rate MS s Ez Orientation of your antenna is optimal with maximum signal strength 46 smart JOY HD Extended Settings and Functions When using a multi feed antenna select the port for the respectively selected satellite at DiSEqC 1 0 gt f you want to receive signals from more than four satellites select the port for the respectively selected satellite at DiSEqC1 1 This is set to Disable by default Select the menu item 22K to permanently switch on or off the 22 kHz control voltage for high low band switching this is required e g for certain antenna systems or to avoid disturbances In most cases Auto is to be selected factory setting gt At Polarity select the correct value for the selected channel Possible settings are H horizontal V vertical and Auto Factory setting is made to Auto 6 2 3 2 Motor Antenna gt At LNB Freq select the value E 11 05C 11 28 corresponding to the used mn 5 LNB Defau
21. 3 7 3 1 Play Da GK VIGGO seien ue ades wae tavole dvo e c koe RUE cas 63 7 3 2 Edit Video ce rented auaeties 63 7 3 3 SOMN VIdCOS Rem 63 Operation in a Unicable System 64 8 1 Via allele vr PPS 64 8 2 Allocation of IF channels and frequencies 64 8 3 HASTA ATION eve vtro PD 65 CIC ANAC sse ae see Eos Pu aevi Suv E Dus Coh sa vox P cC VEN Dan VV eC aas Cua are E UP DUE 66 Transport and DECOMMISSIONING sese 67 TROUDISSHOOUING iiss Getic are eA E rou Dunbar ied 67 EES DO SO wem 69 Technical Pri sm 69 13 1 General lnforrmatlOhi uisi eminem ianehaanis 69 13 2 Remote CONT eC Hc 70 smart JOY HD 13 3 Mans AGA DICE usas dvds Guille desunt odi ne 70 13 4 OH CC LOIS deiectus irt adiesia Dias isa ciet eio 70 13 5 WAST DSU Cec ines E 70 13 6 Dimensions and Weight eese 70 14 Declaration of Conformity csccceeeeeeeeeceseeseeeeeeeeeeeenneeeeseeees 71 smart JOY HD 7 User Information User Information 1 User information 1 1 Use of this Manual e This manual is intended for the HDTV cable receiver smart JOY HD e Please carefully read this user manual before operating the device for the first time e Please note all warnings and notes included in this user manual e Consider this user manual to be an integral part of the product and store it at a well accessible location e
22. BN HDTV Satellite Rec JOY HD P s User Manual Version 03 06 2013 English Jenl On 2 ni NJOY YOUR ENTERTAINMENT Introduction Introduction Dear customer Thank you for buying a smart HDTV satellite receiver This user manual provides information on e placement e installation e adjustment e operation e cleaning and disposal of the receiver Please carefully read the user manual before operating the receiver We hope you enjoy your smart JOY HD Your smart electronic GmbH Industriestra e 29 78112 St Georgen Germany Service hotline 49 0 7724 9478 555 Fax 49 0 7724 9478 333 E Mail service smart electronic de Internet www smart electronic de smart electronic GmbH 2013 All rights technical changes errors as well as printing mistakes reserved Any reproducing or copying of the contents requires prior written permission from smart 2 smart JOY HD User Information Table of Contents 1 User information uoo ori ei ee recetyguroceseseugwendenbiveud decanters eu 8 1 1 Use ot this ManUalic iene et Ep Ae PH EDE VD aie aria 8 1 2 SIGNS 5Vfmbols E3VOULu etes b tdeo oan ie ar atout 9 2 Product Description urne eee eI Rec ode rec cuu Lue Ede rato deve du eEnd vos 9 2 1 SCOPE Of DellVeby suciedad coepi cubi eus aive cuia vad eve Ce On cavo aod C Es 9 2 2 RECEN TOT UU TET 10 2 2 1 Front Panel Vusesiue isdem supe up edo ui tere Cure Deut PLA ue DO OI RETE 10 2 2 2 Hear Panel c
23. Timer The smart JOY HD comprises of a Sleep Timer that enables an automatic change of the device from the operating mode to the standby mode 1 Select the submenu Local Time Setting in the menu System and press OK 2 Using the buttons PR and PR select the menu item Sleep Timer 3 Press the buttons P gt gt und to activate the Sleep Timer and define a time between 10 and 120 minutes after which the receiver automatically switches over to the standby mode 4 Press two times EXIT to return to the TV program 6 3 3 Timer In the sub menu Timer of the smart JOY HD you can program edit and delete up to eight different events channel switch 1 In the sub menu Timer Setting mark a timer by using the keys s PR and w PR 2 Press the OK key to open the timer 3 Mark the line Timer Mode by using the keys 44 PR and w PR 14 CEC Consumer Electronics Control HDMI feature for entertainment units provides via HDMI various control functions e g one touch recording or system standby The TV set is the control center and the TV remote control becomes the remote control of the whole system smart JOY HD 53 Extended Settings and Functions 4 You can select from the following possibilities by using the keys P O and 4 Off The timer is deactivated Once Single event only once Daily Event occurs every day at the same time e g the news pro gram every day Weekly Event always at the same
24. and or multi switch include an allocation table similar to the following table 8 2 Allocation of IF channels and frequencies a Exemp frequency MHz Frequency MHz Receiver 1 1284 Receiver 2 2 1400 Receiver 3 3 1516 Receiver 4 4 1632 Receiver 5 5 1748 Receiver 6 6 1864 Receiver 7 T 1980 Receiver 8 8 2096 gt Enter the frequencies of your receiving system into the nm last column of the table so that all relevant information is quickly available Rule of thumb highest frequency gt shortest cable path 64 smart JOY HD 8 3 Installation If the receiver is connected to a unicable system then RAPS in stallation will automatically can cel The window to the right will open 1 Press the red function key SHIFT to open the submenu Antenna Setup 2 Select the menu item LNB Freq to set Unicable 9750 70600 3 Press the green function key to open the window Antenna Setup Unicable Setting 4 Select the menu item IF Channel and set the IF chan nels start with channel 1 re spectively allocate one of the IF channels in ascending or der to the connected receiv ers Operation in a Unicable System Installation help Astra 19 2 East E 01 11 02 01 Your satellite dish is not assigned correcity to Astra Please use the signal strength bar to adujst your dish optimal Please press the OK Antenna Setup 01 11 9 01 03 iia Hotbird ISE diio2 12389 H 27500 a Disable
25. ase and lower case by pressing Cm the yellow function key Delete individual letters numbers by pressing the SHIFT key red gt Repeat this until the desired favorite name is entered gt Press the blue L R key to return to the sub menu Favorite and press EXIT to leave the sub menu 6 2 Menu installation The default settings apply to a standard satellite system Any further sys tem functions e g unicable system or motor antenna should be manually set in the menu Installation gt Incase of doubt have those settings being made by an expert Usually there are no required settings within scope of normal use of the system CAUTION 6 2 1 Antenna Connection 1 In the menu Installation select the submenu Antenna Connection and confirm by pressing OK 2 Select by using the keys P L and 4 2 if a Fixed Antenna or a Motor Antenna is connected to the receiver 3 Press EXIT to leave the submenu Antenna Connection 4 Press EXIT again to leave the menu Installation and to return to TV operation or go to another submenu If you selected a Motor Antenna then such antenna should be further configured at the menu item Antenna Setup smart JOY HD 43 Extended Settings and Functions 6 2 2 Satellite List The submenu Satellite List states a preset list of possible satellites De pending on your antenna system you can select the satellites used for receiving channels 1 In the menu Installation select the su
26. bmenu Satellite List and confirm by pressing OK 2 Select the satellite you want to receive by pressing the keys d PR and W PR and confirm by pressing OK The selected satellite will be correspondingly marked F2 er selecting one of the buttons on the You may also edit the satellite list by right edge of the menu window To change an entry 1 Press the red function key SHIFT 2 Select by pressing the keys 4 PR and W PR if you want to change name or longitude position 3 Select the text position to be changed by pressing the keys P E and 4 Enter the numbers and letters using the numeric keys of the remote control Press the red function key SHIFT to switch between upper case and lower case Press the green function key to delete the currently selected posi tion Press the yellow function key to confirm your changes and to re turn to the satellite list Press the blue function key L R to cancel changes and to return to the satellite list To add an entry 1 Press the green function key 2 Enter name and longitude entering of text as described in the section Change 44 smart JOY HD Extended Settings and Functions To delete an entry 1 Select the satellite to be deleted by using the keys PR and W PR 2 Press the blue function key L R A window will open stating the question if you really want to delete the entry 3 Select OK or No by using the keys
27. ct your spe cialist dealer Service Hotline In case of technical problems connection problems or general ques tions on settings Service Hotline 49 0 7724 9478 555 Fax 49 0 7724 9478 333 E Mail service smart electronic de Internet www smart electronic de 68 smart JOY HD Disposal 12 Disposal Do not dispose of the receiver and the batteries in nor mal household refuse CAUTION Please ask your municipal administration on possibili ties for environmentally friendly and proper disposal of the receiver Please take the batteries to a collecting point The WEEE symbol on the product and its packaging states that this product is an electrics or electronic de vice Do not dispose of such device in the household refuse but take it to your local municipal collecting point collection station pn Your contribution to disposal of this product will protect the environment and the health of all people Material recycling helps to reduce consumption of raw materials 13 Technical Data 13 1 General Information e HDTV 1080p e RAPS e Unicable compatible EN50494 e Favorite lists e Standby Save Energy mode e EPG e Kanalsortierung e JPEG and MP3 playback Alpha Num Genre HDTV Sat 16 WEEE Waste Electrical and Electronic Equipment The WEEE directive is the EC directive 2002 96 EC on reduction of the increasing amount of waste from electrical and electronic equipment not
28. cu coni tient ete mtb facul cout pasce pu Ses Up 11 2 3 REMO CONTON aoa ia E eE 12 2 4 DAVE Brel Oy useen E E T 14 2 5 Guarani eee a LT 14 3 General Safety Instructions cseeeeee eere 14 3 1 Mtende m Mic E 14 3 2 Risks in Case of Intended Use seeessees 14 3 3 Boreae a A 15 3 4 GOUNA eee a E ed Ure 16 3 5 Handling of Batterie seritsin e 16 3 6 Notes on Product Liability esseeesseesssssss 16 4 Installation of smart JOY HD 1 eese 16 4 1 Connection Schee emiren nennen nennen 17 4 2 Connect Satellite Antenna aegre 17 4 3 Connect TV Seb coiere cientes steve tula iua p ETUR 17 4 4 Connect Home Cinema System Optional 18 4 5 Connect Data Storage Optional 19 4 6 Insert Batteries of Remote Control 19 5 Basic ODerallOliaaasedun vetu acie aa a a ote usus 20 5 1 SWECON RECE VE eet to reet eo re borse Ub vue o oe FUP V ER LU 20 5 2 uki ziltzitfo nme rec cT TC 20 smart JOY HD 3 Table of Contents 5 2 1 Language d acetate dee eadettacaant leider naa adeaaldadelinbedtecaine 20 5 2 2 PA CAME SM REM E A E nd Meee eee eee 20 5 2 3 RAPS Patrametersnumutteteiadiesvactus e elas melas 22 5 2 4 SAS NTC NS m e 23 5 2 5 CONU Er cR 24 5 2 6 Regional CG Manne Dr 24 o CHANING FINO ccs met dt eden CoudoRu a 25
29. ed into submenus Media Player PVR Storage and PVR Setting The Media Player can be used to play own TV recordings as well as MPEG MP3 and JPG files available on the data storage 1 Open the Media Player by se lecting the item Media Player in the menu REC and confirm ing by pressing OK or by pressing the yellow func tion key 2 Press the key O until the upper line states the desired file on the very left The folder structure now only displays the files corresponding to the desired file type smart JOY HD 59 Media Player Only after selecting e g music this will display available er music files With Record the TV recordings included on the data storage will be displayed 3 Press w PR to select the connected data storage and confirm by pressing OK The present directories and files as far as they correspond to the se lected file type will be displayed 4 Select the file to be played press OK to open a directory 5 Press OK to start playback or press the key P 6 Use the keys P Il m44 P 4 and P to control playback The buttons on the bottom edge of the Media Player window provide fur ther functions Such functions depend on the selected file type music images videos 71 Music A11 Playback 1 Select the track to be played by using the keys 44 PR und w PR 2 Press OK to start playback 3 Use the keys gt B 4 and PP to control playback A12 Playlist 1 1 2 1 Creating a P
30. escribed in 5 8 3 the made selection or sorting is deleted as soon as a channel is Ez selected by pressing OK i e if you are then pressing the OK key to show the channel selection window the channel selection list is displayed in its previous original state 9 8 4 Recall gt Press the PR key to go to the last viewed channel 3 0 0 EPG The Electronic Program Guide is a comfortable tool replacing a printed TV guide smart JOY HD 33 Basic Operation 3 0 9 1 Single EPG gt No Description gt gt 34 Press the SEPP key of the 2 3 4 remote control The window Single EPG information on one channel will open 1 All programs during a day with start and end time the selected program is color marked Date of day to which display applies Duration of current program start time end time Name of current program Illustration of the colored function keys and their functions Oo oa A W N Detailed information on the current program Press the keys 44 PR and w PR to display a later or earlier pro gram 1 Press the keys b UC and 4 to page forward back respective ly one day 2 Press the green function key to scroll down in the information section 6 Press the red function key to scroll up in the function area 6 Press the yellow function key to include channel date switch on time and duration of the marked program into a timer The Timer Mode is se
31. et values from 7 fo 70 seconds Default value is 5s factory setting 6 3 4 2 OSD Transparency gt Select transparency of the on screen menu by using the keys bc and 4 3 You may set values from 026 OFF no transparency to 4026 almost transparent Default value is OFF 6 3 9 Other 6 3 3 1 INB Supply Voltage gt Select LNB Spannung to switch on off the LNB supply voltage at LNB IN using the keys P C und 4 Based on new EC regulations this receiver is equipped with an energy saving system After three hours the re ceiver will automatically switch to energy save mode energy consumption of less than 1 W unless a function is triggered via remote control during such period e g volume change or switching of channels You can de activate the automatic standby function via the menu S OSD On Screen Display smart JOY HD 55 Extended Settings and Functions 6 3 9 2 X Automatic Standby Function Select Auto Standby to switch on or switch off the automatic standby function using the keys P D and 4 factory setting is Auto Standby On 6 3 9 3 Simultaneous Playback of Picture and Sound Asynchrony between the image and the sound signals might for example occur in your home cinema system due to the use of long cables Your smart JOY HD offers the possibility to balance this by slightly shifting the audio against the video signal 1 Select in the menu System Setup the subme
32. from the Playlist 1 Press the yellow function key to remove all tracks from the playlist You will be asked if you really want to delete all entries 2 Select Yes or No by using the keys P O and 4 lt and confirm by pressing OK When stating No you will be directed back to the play list When stat ing Yes the play list will be completely deleted and you will be directed to the start window of the Media Player 7 1 3 Edit Audio Files Press the blue function key to go to the Edit mode Here you can rename tracks by pressing the red function key copy tracks by pressing the green function key and delete tracks by pressing the yellow function key as well as create new folders by pressing the blue function key smart JOY HD 61 Media Player Press the EXIT key twice to leave the Edit mode You will be directed back to the initial window of the Media Player 7 1 4 Sort Audio Files Press key 1 to sort the displayed tracks by name play time file size or favorites Favorites are the tracks that are included in the current play list 7 1 5 Playback Mode Press key 2 to change the playback mode Symbol in Media Player window a m Single track is played and repeated tt All tracks in the current directory are played and re peated in the displayed order to R a All tracks in the current directory are played in random order and are then repeated Press the EXIT key to close the
33. function Favorite 6 1 1 2 Provide Channels with Password Protection Lock Against Unauthorized Ac cess 1 Mark the corresponding channel by using the keys PR and w PR smart JOY HD 39 Extended Settings and Functions 2 Press the red function key SHIFT 3 Confirm by pressing OK You will be requested to enter a password 4 Enter a password Locked channels are marked in the channel lists F 5 Again press the red function key SHIFT to leave the function Lock Ez From now on first the password has to be entered to be able to watch such a locked channel 6 1 1 3 Skin Channels when Switching from Channel to Channel Zapping 1 Mark the corresponding channel by using the keys PR and w PR 2 Press the green function key 3 Confirm by pressing OK Channels to be skipped are marked in the channel lists 4 Again press the green function key to leave the function Lock Ez From now on the channel is skipped when switching from one channel to the next Zapping 6 1 1 4 Move Channels to Another Channel Position 1 Press the yellow function key to activate the function Move 2 Mark the channel to be moved by using the keys PR and w PR and confirm by pressing OK The channel to be moved is marked in the channel list If you want to move more than one channel then mark further channels by using the keys 4 PR and PR and respectively confirm by pressing OK The channels to be m
34. hannel list smart JOY HD Basic Operation 3 27 Ghannel Filter Select Erotic and or Call TV by ChennekFilte p pressing the keys amp and w and select the option Yes to include such channels into the channel list or Ao to not in clude such channels by re spectively pressing P or 4 Press OK to go to the next window Subscribed packages here you will be asked if pay TV providers should be included into the channel list 9 3 Select Operation Mode Ez TV is the operation mode after first switching on of the receiver or after restoration of factory settings You can select between the operation modes TV TV channels and RADIO radio channels as follows gt Press the key TV RADIO on the remote control Press again the key TV RADIO to return to the previous operation mode 3 4 Lall Leave Menu gt To call the menu press the Ramanan Danan key MENU of the remote con trol or at the receiver The menu is called smart JOY HD 25 Basic Operation The following is displayed in the headline of the various menu windows 1 2 3 1 Name of menu window 2 Current date 3 Current time Main Menu El 21 04 10 31 Press the EXIT key to leave the menu or to go back one step Ez In could be possible that you have to press EXIT sever al times to go back to TV mode 3 9 Menu Navigation The menu items with the settings for TV and radio can be respectively accessed in the
35. he longitude of the position of your antenna by using the numeric keys of your remote control Select Local Latitude to enter the latitude of the position of your an tenna by using the numeric keys of your remote control Select Motor Setting and MESE press OK to open the sub Transponder tl 10832 H 22000 menu Motor Setting 1 Select Satellite to select the satellite that should be used as reference for USALS control of the antenna 2 Select Transponder to select the transponder that should be decisive for the antenna position usually the transponder that is used to send your preferred channel 3 Align your motor antenna so that signal strength and signal quality are displayed at the lower screen edge reach maximum values 4 Press EXIT to return to the submenu Antenna Setup gt Inthe submenu Antenna Setup select the item Limit Setup and press OK to open the window Limit Setup Proceed as described above 6 2 4 Single Satellite Here you can scan individual satellites for receivable channels gt At Satellite select the satellite for which the scan should be per formed smart JOY HD 49 Extended Settings and Functions Also here options are limited to the satellites that are CS marked in the Satellite List as such satellites from which you want to receive channels gt Select Only FTA to determine if scan should be made only for FTA channels or for all channels gt At Scan Channel se
36. he menu Decrease volume to the left in the menu Increase volume to the right in the menu Show channel list confirm menu item Display menu or exit menu owitch standby operating mode Standby LED on when the receiver is in standby mode Power LED on when the receiver is in operational mode 4 digit display to show the channel number or the time smart JOY HD Product Description 2 2 2 hear Panel 1 2 No Description a 1 LNBIN Connection for LNB DVB S 2 SERVICE HS232 socket 3 TV SCART connection for TV device analog 4 HDMI Digital audio and video out 5 ag OCDE Digital RCA audio out SPDIF 6 USB Connection for external USB data storage HDMI High Definition Multimedia Interface is a compact audio video interface for transmit ting uncompressed digital data smart JOY HD 11 Product Description 23 Remote Control No Key 2 1 9 3 FIND 4 MENU PR PR 5 us E OK LIST 12 17 a a k 2d MC 3 0 B t A uw D 18 19 20 oV uu UKO oco Switch between operational and standby mode Direct channel selection Call of channel search function Call main menu Channel or up navigation in menu Channel or down navigation in menu Volume or menu navigation to the right Volume or menu navigation to the left Display channel list confirm menu item smart JOY HD 24 25 26 2f 28 29 30 Key AUDIO TV RADIO
37. i L 7 CAPS ODEL Additionally to letters and numbers there are also special buttons CAPS Changes between upper case and lower case yellow function key only effective with letters DEL Deletes the last entered character red function key or lt OK Closes the windows blue function key SP Enters a space character The question mark as first character has a wildcard function Example R searches for all channel names that include an R 32 smart JOY HD AS soon as the first selected character has been confirmed by pressing OK a second window will open showing all channels starting with this character in most cases the first char acter is a letter 0002 auto motor und s 0003_ Animal Planet m Rt n o 0004 arie HD 1 00 gt AD ESL 0006 AXN a B Di Q008 SATV AXURA es 5 a Basic Operation gt Press EXIT to close window 1 provided that selection is sufficiently arranged for your purposes Now you can select the desired channel in window 2 by using the keys 4 PR and w PR and confirm by pressing OK gt Return to entry of characters See above to further limit channel selec tion 9 8 3 4 Sort Channel List by Alphabet gt Select Sort A Z or Sort Z A to sort the displayed channels in ascend ing or descending alphabetical order in the channel selection window With all of the functions as d
38. ing height is filled up by black bars 76 9 For playback with a 16 9 TV set 6 3 1 3 Format of the SCART Video Output 1 Select the menu item TV System in the sub menu System Setup and confirm with OK 2 Select the item Scart Out and press OK 3 Press the keys 4 PR und w PR to select the format of the SCART video signal and press OK Possible values are YUVand AGB Default value is YUV Because of the internal signal processing it is no longer Cg possible to set a resolution higher than 576i on the HDMI output if the SCART RGB output format is se lected 6 3 14 Digital Audio Out Select Digital Audio Out to set the format of the digital audio signal by using the keys P C and 4 PCM Pulse Code Modulation default DD Dolby Digital multi channel audio 52 smart JOY HD Extended Settings and Functions For programs broadcasted in DD format select DD if Ez you have a connected DD compatible multi channel amplifier or a DD compatible home cinema system or if your TV set is capable of processing DD signals 6 3 15 Smartlink CEC If you have a CEC compatible TV set and receiver and TV set are con nected via HDMI you can switch on and off standby mode both sets with the remote control of your smart JOY HD 1 Select in the menu System the submenu TV System and press OK 2 Select SmartLink and use the keys P amp and 4 lt to switch the SmartLink function on and off 6 3 2 Sleep
39. isplay settings Select Brightness to change the brightness value from O to 100 de fault value is 50 by using the keys P D and 4 Select Contrast to change the contrast value from O to 100 default value is 50 by using the keys P C and 4 lt gt Select Saturation to change the saturation value from O to 100 default value is 50 by using the keys P C and 4 Select Hue to change the hue value from 0 to 100 default value is 50 by using the keys P and 4 lt gt Select Sharpness to change the sharpness value from O0 to 10 default value is 5 by using the keys P C and 4 lt 6 4 4 Update of the Receiver Software There are two possibilities to update your receiver 6 441 Software Update via Satellite If you receive your TV signal via Astra 19 2 E then you can perform an update of the receiver software via satellite In the menu Tools select the submenu S W Upgrade by smart JOY HD 57 Extended Settings and Functions 1 Leave all settings unchanged factory settings The option of software update via satellite is only possi ble via Astra 19 2 E Correspondingly all settings should be left unchanged in the status as preset by smart cge Satellite 1 1 Astra 19 2 E Transponder 61 84 12604 H 22000 Frequency 12604 Symbol rate 22000 Polarization H Download PID 343 2 Mark the button Start by using the keys amp PR and w PR and confirm by pressing the OK key
40. laylist gt Select a track by using the keys PR and w PR and press the green function key to add this to the playlist favorite list The respective track is marked with a heart symbol 2 AC DC TNT mp3 v You can repeat this procedure for all tracks to be added to the playlist Pressthe yellow function key to add all tracks from the current direc tory to the playlist If pressing the yellow function key again the playlist will be complete ly deleted 60 smart JOY HD Media Player Press the SHIFT key red to display the favorite list playlist A new window Show Playlist will be displayed Now you can move or remove files in from the list 1 1 2 2 Moving files within the Playlist 1 Select a track to be moved by using the keys a PR and w PR 2 Press the SHIFT key red to mark the selected track for moving MP3 L 3 Select the new position of the selected track by using the keys A PR and w PR 4 Leave the Move function by pressing the SHIFT key red again Now you can close the window Show Playlist by pressing EXIT or move another track by starting again with step 1 or you may use the 7 1 2 3 Delete files from the Playlist 1 Select a track to be deleted by using the keys 4 PR and w PR 2 Press the green function key to remove the selected track from the playlist 3 Press EXIT to end deletion or go back to step 1 to remove further tracks from the playlist 7 1 2 4 Delete all files
41. lect if you want to perform scan only for TV chan nels only for radio channels or for TV radio channels gt At Network Search select if you want to search for an individual channel No or all channels of a channel network Yes e g PRO7 SAT1 KABEL1 SIXX The item Network Search will only be active af ter selecting the scan mode Preset Scan i e Standard Scan At Scan Mode select the scan mode Preset Scan Standard Scan In such mode only the frequencies included in the TP list are regarded Auto Scan Blind Scan Here all frequencies are scanned wheth er they are included in the TP list or not At Tuner select the LNB to process the signals if only one LNB is present then this item will not be active Start channel search by selecting Search and confirm by pressing OK 6 2 0 Multi Satellite Multi Satellite differs from Single Satellite by the fact that all satellites marked in the satellite list are scanned for receivable channels 6 3 Menu System Setup 6 3 1 ITV System Here you can make several settings to the signal format at the audio and video outs gt Inthe menu System Setup select the sub menu TV System and con firm by pressing OK 12 FTA Free To Air unencrypted channels 50 smart JOY HD Extended Settings and Functions 6 3 1 1 Video Resolution 1 Select the Video Resolution 2 Press OK to display a list with the selectable values 3 Select the value appr
42. lt value is a univer sal LNB with 9750 10600 MHz gt At Motor Type select the used control signal technology Select be tween DiSEgC 7 2 and USALS depending on the used motor The submenu item Motor Setting states different settings depending on your previous selection 6 2 3 2 1 DiSEqC 12 gt Select Delete All to delete all previously set satellite positions gt Select Motor Setting and press OK to open the submenu Motor Set ting 8 DiSEqC Digital Satellite Equipment Control a digital control signal technology with satel lite receiving systems DiSEqC1 0 supports four satellite positions 10 DiSEqC1 1 supports 16 satellite positions 11 As compared to 1 0 and 1 1 DiSEqC1 2 offers the additional possibility of rotor control USALS Universal Satellites Automatic Location System particularly simple motor antenna control smart JOY HD AT Extended Settings and Functions 48 To set various antenna positions 1 Select Satellite to select Motor Setting B 11 050 11 45 the satellite to which the ae following settings should apply 1 Select Transponder to select the transponder that should be deci sive for the antenna position usually the transponder that is used to send your preferred channel 2 Select Pos No amp Save to determine a position number at which the respective satellite i e the respective antenna position should be saved 3 Select Go to X to call a position from which
43. ly for such purpose Any other use is deemed to be unintended use 3 2 Risks in Case of Intended Use Humidity wrong mains voltage and or wrong mains frequency lightning stroke or mechani cal overload may cause malfunction of or dam age to the device gt Ensure that the receiver in particular the mains plug and the remote control are not exposed to any humidi ty Example Do not place filled flower vases or similar onto the receiver CAUTION gt Only connect the receiver to 175 250 V 50 60 Hz Disconnect mains plug in case of thunderstorms or mal function gt Do not place heavy items onto the receiver gt Do not bend or squeeze the cable 14 smart JOY HD General Safety Instructions Risk of electric shock when contacting mains voltage Damage to housing mains cable or improper repair may result in contact to mains voltage Do not place heavy items onto the receiver WARNING gt Do not bend or squeeze the cable 3 3 Y gt Repairs of plug cable or receiver should only be per formed by qualified specialists Location Place the receiver onto a solid and level surface Protect the receiver from humidity heat dust and dirt Do not place items filled with liquid e g flower vases onto the receiv er Protect the receiver from dripping and splash water Do not place burning items e g burning candles onto the receiver Ensure sufficient ventilation ventilation slots must
44. m displayed on your TV set Teletext is only possible if the selected channel supports such function Press the TXT key to activate teletext Press the EXIT or TXT key to deactivate teletext 9 8 8 Aspect Mode gt Press the V MODE key several times to set the aspect ratio Possible values Auto 4 3PS 4 3LB 16 9LB see table in section 6 3 1 page 50 Ez Setting of aspect ratio is also possible via the menu see section 6 3 1 smart JOY HD 37 Extended Settings and Functions T2 3 4 5 6 7 9 9 Channel information gt Press the INFO key twice The SWR Femsehen window on the right will be dis Feiern eric ia played icine epee HG Themen hiarapniesor auch at or Oot ee 8 9 10 No 1 Genre 2 Start time and end time of current program 3 Name of current channel 4 Name of current program 5 Language of current program 6 Detailed information on current program 7 DVB PIDs for video audio PCR 8 Frequency Polarization H horizontal V vertical Symbol rate 9 Signal strength 10 Signal quality 6 Extended Settings and Functions 6 1 Menu Edit Channel 6 11 TV Channel List Radio Channel List You can individually customize the lists There are various available possi bilities for editing For reasons of simplification only editing of TV lists will be explained in the following Editing of radio channel lists will be per formed corresponding to editing of TV channel lists PID Packet IDentifier each
45. nu Other and press OK 2 Select AV Sync Value and press OK to set a value of shift between 500ms and 500ms using the buttons P D und 4 factory default is AV Sync Value 0 ms 6 3 6 RAPS System The window RAPS System dis RAPS System B 11 05 12 23 plays at Last changes from the a date of the RAPS file on the re ceiver gt Select RAPS Mode to determine if the channel list should be com pletely recreated or only be updated after resetting to factory settings gt Select Auto RAPS Scan to determine if the automatic update function should be activated gt Select Start to manually start new configuration or updating 6 4 Menu Tools 6 4 1 Software Version The sub menu Information displays the current version number of the smart JOY HD software 56 smart JOY HD Extended Settings and Functions 6 42 Factory Settings If you erroneously saved wrong settings or if you want to pass on the re ceiver without your settings then you can reset the receiver to the factory settings reset To reset the receiver 1 In the menu Tools select the sub menu Factory Settings 2 Press the OK key You will be asked if you want to reset the receiver and delete individual settings 3 Select Yes or No by using the keys P D und 4 lt and then press OK After resetting your receiver the language selection menu will be dis played 6 4 3 Display Setting This sub menu can be used to edit various d
46. ode 6 1 1 6 Delete Individual Channels from Channel List 1 In the sub menu Edit Channel TV Channel List press the blue function key Edit 2 Again press the blue function key Delete to access the Delete mode 3 Mark the channel to be deleted by using the keys 44 PR and w PR and confirm by pressing OK The respective channel is corre spondingly marked SETTE Repeat step 3 as long as all channels to be deleted are marked 4 Again press the blue function key Delete or the EXIT key to leave the Delete mode 5 If you agree to overwrite the factory set channel list when leaving the menu see above the marked channels will be deleted 6 12 Delete All To delete all channels 1 Select Delete All in the menu Edit Channel 2 Press OK You will be asked if you want to delete all channels 3 Select the answer Yes or No by using the keys b gt and and confirm by pressing OK Ez After deletion of all channels all channel lists will be empty and should be newly created 6 13 Favorite This sub menu can be used to rename favorite lists 1 Select the favorite list to be edited by using the keys 44 PR and w PR and confirm by pressing OK 2 Anon screen keyboard will be displayed 3 Select letters numbers by using the keys 44 PR and w PR as well as the keys P C and 4 lt and confirm by pressing OK 42 smart JOY HD Extended Settings and Functions owitch between upper c
47. opriate to your TV set by using the keys PR and wW PR Example If your TV set is capable of displaying a resolution of 720p then you should also set 720p at the receiver 720p is the factory set ting If receiver and your TV set are connected via a SCART cable then max resolution is 576i PAL format In addition to the setting menu the video resolution can CS be changed directly via the remote control Press several times if necessary the green function key to switch the resolution of the video signal at the HDMI output The set value is shown in the display 13 p progressive scan progressive scan images are transmitted e g 720p means that 50 progressive scan images with a resolution of 1280 pixel line and 720 lines image are trans mitted per second i interlaced video odd and even lines are transmitted alternatingly smart JOY HD 51 Extended Settings and Functions 6 3 1 2 Aspect Mode gt Select Aspect Mode to set the aspect ratio by using the keys ro and 4 Auto Default setting the receiver selects optimum value 4 3PS For playback with a 4 3 screen PS Pan amp Scan e 4 3 programs picture is optimally displayed e 16 9 programs picture height is adjusted to screen picture in formation on the right and left are missing 4 3LB For playback with a 4 3 screen LB Letterbox e 4 3 programs picture is optimally displayed e 16 9 programs picture width is adjusted to screen lack
48. oved should not be necessarily in an uninterrupted sequence 40 smart JOY HD Extended Settings and Functions TV Channel List B 21 04 15 13 Example Before moving three channels are marked 3 Select the channel number to which the channel channels are to be moved to by using the keys PR and w PR and again press the yellow function key 4 Press the EXIT key to leave the function Move 6 1 1 5 Rename Channels 1 In the sub menu Edit Channel TV Channel List press the blue function key L R 2 Press the green function key to activate the renaming process 3 Mark the channel to be renamed by using the keys PR and w PR and confirm by pressing OK 4 The window Rename will be displayed Select the character to be changed by using the keys P C and CAPS DEL OK CANCEL SWR Fernsehen BW Enter the new character respectively by using the numeric keys of the remote control Press the red function key CAPS to switch between upper case and lower case Press the green function key DEL to delete the respectively se lected character Press the yellow function key OK to accept the changes made so far and to close the window Rename smart JOY HD 41 Extended Settings and Functions Press the blue function key CANCEL to discard the changes made so far and to close the window Rename 5 Press the green function key to leave the Rename m
49. s with the channel lists RAPS scan This only takes a few seconds In case of changes the new data are automatically included into the new channel list RAPS download and displayed in a table If a channel changes the receive parameters then this is automatically updated by RAPS In case of new channels such channels are added If channels are permanently discontinued then the corresponding channel number is deleted However new channels are not only added but allocated to logic blocks correspondingly enabling easier finding That is why certain areas may remain free Example For Germany there is the basic list as well as the areas Third Channels Info Sports Special Interest Local TV as well as News starting at channel number 100 and many Music Channels starting at channel number 123 smart JOY HD 21 Basic Operation RAPS Automatic installation B 01 11 9 01 00 You can cancel RAPS installation by pressing the key EXIT whilst the countdown of RAPS installation is running and also at a later point in time during installation The then displayed channel list is a preprogrammed factory list However such list is not updated via satellite due to cancelled RAPS installation The respective up to date RAPS lists are available via the satellite Astra 19 2 Correspondingly RAPS can only be used within the footprint of the satellite Astra 19 2 furthermore your system should be suitable for digital Astra recei
50. sort the list 30 smart JOY HD Basic Operation Press the FIND key to open the window Find f Select one of the offered options GENRE Find A Z by using the keys 44 PR and w PR and confirm by press ing OK 1 SOrt A Z Sor Z A 3 0 3 1 HDTV Filter gt Select HD Vto only show HDTV channels in the channel selection window Use the steps as described in section 5 8 2 on page 30 to select a channel 5 8 3 2 Genre Filter Select GENAE to show the genre selection window 1 1 2 Select the desired genre by using the inoan keys a PR and News 0020 w PR and con Entertainment 0022 firm by pressing Children 0023 EuroNews OK The channel Lim DH LY i Music selection window will open as second window this win 0101 N24 0102 EuroNews 0104 BBC World 0105 CNN Int 0106 Sky News Intl Culture Local Religion dow only shows Documentary channels with the selected genre gt Press EXIT to close the channel selection window Now you can choose another genre smart JOY HD Basic Operation 5 8 3 3 Find Channels by Alphabet 1 Press the FIND key to open the window Find 2 Select a character by using the keys P D and 4 as well as 4 PR and w PR and respectively confirm by pressing OK to accept such character in the field for the name or part of the name of the desired channel P px FE T D a L M
51. t them if re GE quired Please also consider corresponding change of those settings 6 If automatic time setting GMT Usage is switched off then date and time should be manually entered For this select the item Date select the position to be changed by us ing the keys P C or lt and enter the current date by using the numeric keys Then select the item Time select the position to be changed by using the keys P C or 4 and enter the current time by using the numeric keys 7 Leave the menu by pressing EXIT until the screen shows the TV pic ture 4 8 V You have several possibilities to select a channel e Direct channel selection e Channel selection via selection window and e Channel selection via search function as explained in the following sections 28 smart JOY HD Basic Operation 3 0 1 Direct Channel Selection gt Select the desired channel by using the keys PR and w PR With each change of channel an information window with information on the current channel will be displayed 1 2 3 4 9004 RTL Television 09 05 2012 9 17 13 17 00 17 30 Explosiv Das Magazin 17 30 17 45 Exclusiv Das Star Magazin 5 6 No Description Name of next program 1 Channel number of current channel in current channel list 2 Channel name of current channel 3 Date 4 Time 5 6 Name of current program gt Press the INFO key to call this window at
52. t to Once by default Timer Service is set to Change You may change settings as described in section 6 3 1 5 page 53 Press the blue function key to go to the window EPG Press the EXIT key to close the window Single EPG and return to TV operation smart JOY HD 3 0 9 2 EPG After pressing the blue function key in the window Single EPG you will access the window EPG with the following display The current program is marked with amp Basic Operation EPG B 21 04 12 45 BGC 1 Thumbnail of selected channel 2 Channel number of selected channel 3 Name of selected channel 4 Name of selected program 5 Start time and end time of selected program 6 marked channel Current and next program with a timeframe of approx 1 5 hours for the Illustration of the colored function keys and their functions All channels included in the current channel list Day to which the displayed data apply Press OK to open a window with detailed information on the selected program Press the OK key the red function key or the EXIT key to close such window gt Press the keys PR and w PR to flip through all available chan nels gt Press the keys P C and 4 to page back and forward re spectively one program within a channel smart JOY HD 35 Basic Operation Press the red function key to B 21 040 12 53 access the window Time Here select the function on the bottom b
53. the file to be played using the keys 4 PR und w PR In left half of the screen you see a thumbnail and you can watch the record ing in preview mode Use the keys Il and Bl to control playback 2 Press OK to start playback in full screen mode 3 Use the keys gt Il Bl 4 PP dand to control playback 7 3 2 Edit Video Files Press the blue function key to go to the Edit mode Here you can rename tracks by pressing the red function key copy tracks by pressing the green function key and delete tracks by pressing the yellow function key as well as create new folders by pressing the blue function key Press the EXIT key twice to leave the Edit mode You will be directed back to the initial window of the Media Player 7 3 3 Sorting Videos Press key 1 to sort the displayed videos by name play time or file size smart JOY HD 63 Operation in a Unicable System 8 Operation in a Unicable System 8 1 About Unicable The HDTV receiver smart JOY HD allows for changing the receiving mode to the unicable standard This makes it possible to connect several inde pendent receivers up to 12 depending on the used system to only one main line For this an own IF channel and a corresponding frequency should be set for each receiver via the settings menu Allocation of channels and frequencies depends on the used LNBs and or multi switches The data sheet and the technical documentation of your LNB
54. uipment Control a digital control signal technology with satel lite receiving systems smart JOY HD 23 Basic Operation Your antenna system is designed for receiving Astra 19 2 E and Hot bird 13 E These satellites are found and marked in the list You are planning to soon extend your antenna system for receiving of Eurobird 9A 9 E You can additionally mark Eurobird 9A 9 E already now to avoid repeated installation in the future Your antenna system is designed for receiving Astra 19 2 E and T rksat 42 E However the receiver in the children s room should only receive the German channels For this manually deselect T rksat 42 E found by RAPS DISEQqC scan 5 2 5 Country gt gt Select the country in which RAPS select rape fie you want to use the receiver x and correspondingly also the RAPS list by pressing the keys 4 PR and w PR The selectable countries are based on your satellite selec tion as per section 5 2 4 Press OK to go to the next window Your regional channel 9 2 6 Regional Channel gt 24 Select your preferred regional St manamea M channel which will be stored x at number three in the channel list by pressing the keys s PR and w PR Press OK to go to the next window Channel Filter here you can se lect if you want to include erotic channels and call TV channels that may incur quite high telephone costs due to telephone calls to the channel into the c
55. ust free loca Connect the power cord to the power outlet Switch on the power switch Press the POWER key to switch on the receiver Check the cable connections to the receiver and from the receiver to the connected devices fasten cables if required Verify connection of cable and fasten cable if required 67 Troubleshooting symptom Possible cause s Solution Picture only in black The video format of your and white and or receiver is not correctly incorrect synchro set nization The remote control The batteries are empty does not operate The remote control shows into wrong direc tion e Receiver Short cut at the connec switches on and tion from the LNB to the off continuously receiver or the LNB itself or e Display LNBP and screen message At tention LNB short cut no TV image Adapt broadcast television sys tem of the receiver to the broad cast television system of the TV set Replace empty batteries with new batteries Direct the remote control towards the front panel of the receiver e Disconnect the connection LNB Receiver e Check the LNB cable the plug and or the LNB on any short cut e g water in the LNB and remove them e Reconnect the units New operating software for the receiver will be published if required This can be easily downloaded at the website www smart electronic de If the malfunction still cannot be remedied then please conta
56. ving 9 2 3 RAPS Parameters Automatic Programming E 01 11 02 00 During installation RAPS Date Receiver the third installation RAPS Date satellite window Automatic mE Satelite Programming dis Transponder Channel plays various param eters 22 smart JOY HD Basic Operation Date of the RAPS file stored in the receiver Date of the RAPS file currently available on the satellite Number of available RAPS lists Number of satellites included in the RAPS file Astra 19 2 East Hotbird 13 East Turksat 42 East Astra 23 5 East Eurobird 9A 9 East Number of transponders included in the RAPS file A c N Number of all channels in the RAPS lists Progress bar informs on progress of download of the RAPS file 3 2 4 Satellite list Satellite List 01 11 02 11 After completion of RAPS down a2 load and completed satellite scan PU O EAR RAPS DiSEqC scan the win EE ERE dow Satellite List will be opened The window displays the satellites included in the RAPS file As the RAPS lists are available via the satellite Astra 19 2 Astra 19 2 is already marked C and cannot be deselected gt Select a satellite by pressing the keys 44 PR and w PR Press OK to select a non marked satellite Press OK to deselect a marked satellite gt Press P D to go to the next window RAPS select raps file Examples East often abbreviated E DiSEqC Digital Satellite Eq
57. weekday Monthly Event occurs every month at the same day e g every 20 Monday to Friday Event Monday to Friday at the same time 5 In line Timer Service the option Channel is selected There is not any possibility to change this 6 Mark the line Wakeup Channel by using the keys 4A PR and w PR and select the channel to be displayed by using the keys bU and 4 2 7 Mark the line Wakeup Date by using the keys PR and w PR and enter the date by using the numeric keys 8 Mark the line On Time by using the keys PR and w PR and enter the on time by using the numeric keys 9 Mark the line Duration by using the keys 44 PR and w PR and enter duration of the program by using the numeric keys You can go from letter to letter position to position in the date and time fields by pressing the keys met and 4 lt 10 Mark the button Save by using the keys PR and w PR and confirm by pressing OK or select Cancel and confirm by pressing OK if you want to cancel programming then you will return to the sub menu Timer Setting 54 smart JOY HD HEC Extended Settings and Functions You can directly add programs marked in EPG to the timers This significantly facilitates programming as you do not have to make settings for channel date and time 6 34 OSD Setting 6 3 4 1 Using the keys P gt and 4 set the number of seconds after which the OSD should be hidden You may s
58. with USB connection at the USB connector to be able to access MPEG MP3 JPG or other media data files 45 Insert Batteries of Remote Control This describes the steps for inserting new batteries of the remote control or for replacing empty batteries 1 Open the battery compartment on the bottom side of the remote con trol Remove the cover of the battery compartment 2 Place the two batteries 1 5 V type AAA Ensure correct polarity 3 Close the battery compartment gt Replace the batteries if certain remote control func tions are not performed any more or are performed CE incorrectly When replacing batteries always ensure that all bat teries are replaced smart JOY HD 19 Basic Operation 9 Basic Operation This chapter describes the required steps to be able to use the offer of radio and TV channels provided via satellite 5 1 Switch on Receiver 1 Switch on all connected devices 2 Ensure that the correct AV input is selected at the TV set i e that the signals from the receiver are displayed 3 Ensure that the correct audio input is selected at the connected home cinema or hi fi system 4 Connect the mains plug to the power outlet to switch on the receiver 9 2 Installation After first switching on or after resetting the receivers various windows will open 3 21 language By default the smart JOY HD language is pre set to Deutsch German English Frangais Please ensure
59. y using the keys P O and OQ OQ 4 b X 4 gt Press OK when is selected to go to the current program The current program is marked with gt Press OK when P is selected to go one program forward or back gt Press OK when is selected to go two hours forward or back gt Press OK when 44 D is selected to go one day forward or back gt Press OK when is selected or press EXIT to close the window Time and to return to the EPG window Press the green function key to include channel date switch on time and duration of the marked program into a timer The Timer Mode is set to Once by default Timer Service is set to Change You may change settings as described in section 6 3 1 5 page 53 Press the blue function key to leave the EPG window and return to the window Single EPG Press the EXIT key to leave the EPG window and return to the TV pro gram 9 8 6 Audio Settings l 2 36 Press the key AUDIO Select the audio mode by using the keys P C and 4 Depending on the selected channel and the current program the fol lowing modes are available Left Right Stereo Mono Press the keys 4 PR or w PR to select another language or Dol by AC3 Dolby Digital as far as provided by the TV station After selecting the desired audio mode leave the menu by pressing the EXIT key smart JOY HD Basic Operation 3 0 7 Teletext Teletext is an information syste
60. you want to make the selection the value Reference is the zero position 4 Select Save and turn the antenna to the west or east by using the keys P gt and 4 Z3 Search for maximum values of signal strength and signal quality are displayed at the lower screen edge 5 hen press OK to save the found position A query will be dis played 6 Confirm change of position by pressing Yes or discard such change by pressing No 7 Repeat the steps 1 to 6 for any further satellites transponders if applicable Select Recalculation and press OK to discard any previous settings and to again determine antenna position Press EXIT to return to the submenu Antenna Setup Select Limit setup and press LS M OK to open the window Limit setup Select Limit setup to switch between Disable Limit West Limit and East Limit smart JOY HD Extended Settings and Functions 2 Mark the button Limit setup and move the limit as defined in the previ ous step to the east or west by using the keys P O and 4 2 3 Mark the button Go to Reference and then press OK to move the motor antenna to its starting position 4 Press EXIT to return to the submenu Antenna Setup 6 2 3 2 2 USAIS A satellite position is defined as reference and the data provided for lati tude and longitude are then used together with such basic values to cal culate the rotary movement for all remaining satellites Select Local Longitude to enter t

JOY HD - Smart Electronic

Contents

Download Pdf Manuals

Related Search

Related Contents