Home

DIR-615S_A1_User Manual_v.2.5.5_12.10.15_EN - D-Link

1. Disable this network device Diagnose this connection Rename this connection Status Diagnose Bridge Connections Create Shortcut Delete Properties Figure 8 The Network Connections window Page 19 of 180 DIR 615S Wireless N300 Router Installation and Connection User Manual 5 In the Local Area Connection Properties window on the Networking tab select the Internet Protocol Version 4 TCP IPv4 line Click the Properties button Networking Connect using ra This connection uses the following items o Client for Microsoft Networks M J QoS Packet Scheduler M 2 File and Printer Sharing for Microsoft Networks M Internet Protocol Version 6 TCP IPw6 RS Internet Protocol Version 4 TCP IP v4 Y Link Layer Topology Discovery Mapper 1 0 Driver Y Link Layer Topology Discovery Responder Description Transmission Control Protocol Internet Protocol The default wide area network protocol that provides communication across diverse interconnected networks Figure 9 The Local Area Connection Properties window Page 20 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection 6 1 Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons Click the OK button fon Internet Protocol Version 4 TCP IPv4 Properties ua General Alternate Conf
2. the key is not renewed When you have configured the parameters click the Apply button Page 116 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface MAC Filter On pages of the Wi Fi MAC Filter section you can define a set of MAC addresses of devices which will be allowed to access the WLAN or define MAC addresses of devices which will not be allowed to access the WLAN Wi Fi MAC Filter Filter mode MAC filter restrict mode Disabled 7 Disabled Allow Deny Apply Figure 101 The page for configuring the MAC filter for the wireless network By default MAC filtering is not active the Disabled value is selected from the MAC filter restrict mode drop down list on the Wi Fi MAC Filter Filter mode page To open your wireless network for the devices which MAC addresses are specified on the Wi Fi MAC Filter MAC addresses page and to close the wireless network for all other devices select the Allow value from the MAC filter restrict mode drop down list and click the Apply button To close your wireless network for the devices which MAC addresses are specified on the Wi Fi MAC Filter MAC addresses page select the Deny value from the MAC filter restrict mode drop down list and click the Apply button To add a MAC address to which the selected filtering mode will be applied proceed to the Wi Fi MAC Filter MAC addresses page Page 117 of 180 DIR 615S Wirel
3. DIR 615S Wireless N300 Router October 2015 DIR 615S Wireless N300 Router User Manual Contents Chapter 1 Introduction o tee ad GS Sra ae WO et GE 5 Contents and AUCTION viii a a eee ae A ete ee Gok Bee ae bial ela a ede dy 3 5 CONVENTIONS oie ennas Ea A A Se dese shen ee Beane eR eal ti eee Be a Sane GEES 5 Document Structures 2 2s 4eue tie ae i A oer ee eee be SAS ee a ee oe eee 5 Chapter 2 OVErviews on ekeen Bee ee s whee oe Bi Sel Seana Rw A ieee as 6 General TnfOrMAa CL OM ss eii a ok Wek ae cen ally al IA cae Bee eee Swe SUS A A Seca 6 Specifications itis IS ag hay A e E a dl a E 7 Product Appearance sein a bp Wa Sera A Seg eS eg ca Sale ites Polen AA Os 10 TOD BALI NES O aa Shr ahd te dale este a ah ered A e eae ole 10 Back and Bottom Panel il A Said Aes O A eee Se A tee Ba Sta 11 Delivery Package a ci os esece A A ee Ge Vid OER ARLE Die ele SALES ees 4 12 Chapter 3 Installation and Connection 6 13 Before Yous Begins cies A ato aleve be a a ones ates ates 13 Connecting to PC op tesi leh A ee Ste TS ead eye AS gale erg he oe gree el St glee Toes a eee es 14 PC with Ethernet Adapter x ould ww a ore e eh el eagle a Seeds enue ede da 14 Obtaining IP Address Automatically in OS Windows XP ooooooooooooooo 14 Obtaining IP Address Automatically in OS Windows Tres Geesse Taea eE E ooo E Pewwihth WTS R Adapters aT a A ahead A va Aa gut Weta add a S
4. Configuring Wireless Connection 2 Home Click n Connect Select an operating mode for the wireless network Mode 9 Access point gt Turn off Next gt Figure 43 Selecting the operating mode for the wireless network If you are not going to use the wireless connection select the Turn off choice of the Mode radio button Click the Next button and then click the Apply button on the opened page After clicking the button the page for configuring the router to use an IPTV set top box opens see the Configuring IPTV section page 58 If you want to connect portable devices to the Internet via wireless connection select the Access point choice of the Mode radio button Click the Next button Page 55 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual On the opened page in the SSID field specify a new name for the network use digits and Latin characters Home Click n Connect Enter the name of the access point SSID lt Back Next gt Figure 44 Changing the name of the wireless LAN Click the Next button to continue Page 56 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual On the next page you can modify security settings of the WLAN Select the Protected value from the Network Authentication drop down list and enter a key a password that will be used to access your wireless network in the Network key field
5. Status Active sessions Protocol Source IP Source port Destination IP Destination port TCP 192 168 0 1 80 192 168 0 2 52253 Refresh Figure 59 The Status Active sessions page To view the latest data on current sessions in the router s network click the Refresh button Page 72 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Multicast groups The Status Multicast groups page displays addresses of active multicast groups including IPTV channels and groups for transferring service information to which the device is subscribed and the interface through which the device is subscribed Status Multicast groups IPv4 Interface 992222 pumas LAN 239 255 255 250 IPv6 Interface Figure 60 The Status Multicast groups page Page 73 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Net In this menu you can configure basic parameters of the router s local area network and configure connection to the Internet a WAN connection WAN On the Net WAN page you can create and edit connections used by the router By default a Dynamic IP connection and a Dynamic IPv6 connection are configured in the system They are assigned to the WAN port of the router You can edit these connections or delete them Net WAN Name Connection Type Interface Status Direction Default gateway Default IPv6 gateway WAN Dynamic IP Internet up
6. The identifier of your ISP Optional A name of the router specified by your ISP Optional Page 95 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Miscellaneous Isolate connection Enable RIP Enable IGMP Multicast NAT Firewall Ping G OSS El Figure 84 The page for creating a new PPPoE Static IP connection The Miscellaneous section Parameter Description Miscellaneous for IP section Isolate connection Enable RIP When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Select the checkbox to allow using RIP for this connection Enable IGMP Multicast Select the checkbox to allow multicast traffic from the external network e g video streaming to be received NAT Firewall Ping Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Page 96 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface PPP Username Without authorization Password Password confirmation Service name Authenti
7. 1 5dB at 6 9 12 18 24 36 48 54Mbps 802 11n typical at room temperature 25 C HT20 15dBm 1 5dB at MCS0 1 2 3 4 5 6 8 9 10 11 12 13 14 14dBm 1 5dB at MCS7 15 HT40 15dBm 1 5dB at MCS0 1 2 3 4 5 6 8 9 10 11 12 13 14 14dBm 1 5dB at MCS7 15 Page 8 of 180 DIR 615S Wireless N300 Router User Manual Overview Wireless Module Parameters Receiver sensitivity 802 11b typical at PER 8 at room temperature 25 C 82dBm at 1Mbps 80dBm at 2Mbps 78dBm at 5 5Mbps 76dBm at 11Mbps 802 11g typical at PER 10 at room temperature 25 C 85dBm at 6Mbps 84dBm at 9Mbps 82dBm at 12Mbps 80dBm at 18Mbps 77dBm at 24Mbps 73dBm at 36Mbps 69dBm at 48Mbps 68dBm at 54Mbps 802 11n typical at PER 10 at room temperature 25 C HT20 82dBm at MCS0 8 79dBm at MCS1 9 77dBm at MCS2 10 74dBm at MCS3 11 70dBm at MCS4 12 66dBm at MCS5 13 65dBm at MCS6 14 64dBm at MCS7 15 HT40 79dBm at MCS0 8 76dBm at MCS1 9 74dBm at MCS2 10 71dBm at MCS3 11 67dBm at MCS4 12 63dBm at MCS5 13 62dBm at MCS6 14 61dBm at MCS7 15 Modulation schemes 802 11b DQPSK DBPSK DSSS CCK 802 119 BPSK QPSK 16QAM 64QAM with OFDM 802 11n BPSK QPSK 16QAM 64QAM with OFDM Physical Parameters Dimensions 174 x 115 x 30 mm 7 x 4 5 x 1 2 in Weight 226 g 0 5 Ib Operating Environment Power Output 12V DC 0 5A Tempera
8. ARE lt Back Next gt Figure 34 Configuring PPPoE Dynamic IP WAN connection If your ISP has provided the addresses of the DNS servers deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field As a rule the specified settings are enough at this step to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPPoE Static IP or PPPoE Dynamic IP WAN Connection section page 93 Click the Next button to continue Page 46 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Home Click n Connect Connection name pppoe Username Password Password confirmation ESPERA lt Back Next gt Figure 35 Configuring PPPoE Dynamic IP WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed descriptio
9. Connection section page 99 Click the Next button to continue Page 48 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual If needed enter the IP addresses of the ISP s local resources Home Click n Connect IP addresses of your ISP s local resources Here the wizard can add IP addresses of your ISP s local resources IP address 1 IP address 2 IP address 3 IP address 4 IP address 5 IP address 6 IP address 7 IP address 8 IP address 9 IP address 10 lt Back Next gt Figure 37 Configuring PPTP Static IP WAN connection Click the Next button to continue Page 49 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Home Click n Connect Connection name statpptp Username Password Password confirmation VPN server address Expert XPS lt Back Next gt Figure 38 Configuring PPTP Static IP WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP In the VPN server address field enter the IP or URL address of the PPTP or L2TP authentication server As a rule the specified settings are enough to configure a protected connection the VPN tunnel If you need to specify additional settings open the expert settings mo
10. Use digits and Latin characters After applying this setting the WPA PSK WPA2 PSK mixed authentication type is specified for the router s WLAN When the Open value is selected the Network key field is unavailable After applying this setting the Open authentication type with no encryption is specified for the router s WLAN G Home Click n Connect Specify the security mode Network Authentication Protected M Network key lt Back Next gt Figure 45 Selecting a security mode for the wireless network Click the Next button to continue On the next page the specified settings are displayed Make sure that they are correct and then click the Apply button After clicking the button the page for configuring the router to use an IPTV set top box opens see the Configuring IPTV section page 58 Page 57 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Configuring IPTV On the page you can configure the router to use an IPTV set top box JO Home Click n Connect Ifyour ISP provides a service to IPTV you can connect a set top box directly to the router without using additional equipment To do this check the checkbox corresponding to any LAN port and then connect to the port your TV top box For example If you chose the 1st port of the router then the prefix to connect to the port LAN 1 Notice a computer connected to a dedicated port will not have access to the
11. User Manual Installation and Connection Configuring Wi Fi Adapter in OS Windows 7 1 Click the Start button and proceed to the Control Panel window 2 Select the Network and Sharing Center section If the Control Panel has the category view the Category value is selected from the View by drop down list in the top right comer of the window choose the View network status and tasks line under the Network and Internet section E gO EF Control Panel All Control Panel ltems i 62 tr Search Control Panel Adjust your computer s settings View by Largeicons A EJ z v a N p amp Indexing Options Internet Options Keyboard Location and Other Sensors Network and Sharing Mouse Center Performance Information Parental Controls and Tools Notification Area Icons e af ou ml Personalization 4 Phone and Modem Power Options L Programs and Features 7 Recovery Region and Language RemoteApp and Desktop A A i Canne Sound U Speech Recognition Sync Center Re System 5 Taskbar and Start Menu Troubleshooting BE User Accounts E Windows CardSpace Windows Defender t Windows Firewall Ey Windows Update Figure 12 The Control Panel window In the menu located on the left part of the window select the Change adapter settings line In the opened window select the icon of the wireless network connection and make sure that your Wi Fi adapter is on To open the
12. WAN Connections cecc ce eee God ue ts ea 75 Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connecti0N o oo o o o o 79 Creating Static IP or Dynamic IP WAN Connecti0ON c c o o cooooooooooooo 85 Creating Static IPv6 or Dynamic IPv6 WAN Connecti0N o o oooooooooo o 89 Creating PPPoE Static IP or PPPoE Dynamic IP WAN Connection 93 Creating PPTP L2TP Static IP or PPTP L2TP Dynamic IP WAN Connection 99 DAN god apn aso Bei oh ch Sg epg A gue corte oe Gudea slg Rie ep A A ta LOG WISE desi Dig es ea A bred We BREA wie BN AS ne ee Ae ea Dee aed Gee we ees eee SS 110 BASTE SEUEING Sis Suv Wi Ses soe tee Sere oh hele a ee ob See A Sat Sd Sta aa Wee oon ae Wk LO Security Setting Sic nj wide esas ts Wie vol cases Sen dele aie Arey GIG eleven eS Biel WG Sree OA EA le eo ak LES MAC PUES E earum A AAA Biel be OAT Se aE as ALS whale Bode Sealed oer hs ene ELT ETSE OF WISEL CPOE Se Ai o Rielle a a ara LLY Using WPS Function via Web based InterfaCle o oooooooooooooo nooo 122 Using WPS Function without Web based InterfaCle oooooooooooooooooo o 122 Additional Settings ica o da as ios Bla a wes aoe LDA WMM oss a A A A A A A A a e a 26 CLIO E E A AE AA A AE A A AA EA eat td 28 Advanced a e A a ELEN dy a a vexed 131 VEAN ta satis AA acetals A Gotan Sse 18 we Lose E ee alco tale eS Bae Oe he Seed 32 IR CV IRS EE caesar 8 Seite st a a Ee Beg Sy A RS Yee a e aSr T O e O DDN Spas dd ds ti A tal ated NS Ete ta A ate
13. create groups of ports for VLANs enable the UPnP IGD protocol configure notifications on the reason of the Internet connection failure configure a DDNS service define static routes create rules for remote access to the web based interface allow the router to use IGMP RTSP enable the SIP ALG PPPoE pass through PPTP pass through and L2TP pass through functions configure TR 069 client enable the flow control function Page 131 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual VLAN On the Advanced VLAN page you can create and edit groups of ports for virtual networks VLANS By default 2 groups are created in the router s system lan it includes ports 1 4 You cannot delete this group e wan for the WAN interface it includes the INTERNET port You can edit or delete this group Advanced VLAN Name Type Untagged ports Tagged ports VLAN ID Enable lan LAN port1 port2 port3 port4 wifit Yes wan Untagged NAT internet Yes Add Figure 108 The Advanced VLAN page If you want to create a group including LAN ports of the router first delete relevant records from the lan group on this page To do this select the lan group deselect the needed checkbox located to the left of the relevant port and click the Apply button To create a new group for VLAN click the Add button Page 132 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based
14. BSSID and Network Authentication fields For the Open authentication type with no encryption click the Apply button For the Open authentication type with encryption and the Shared authentication type select a needed value from the Default Key ID drop down list If needed select the Encryption Key WEP as HEX checkbox to set a hexadecimal number as a key for encryption Then select a needed value in the WEP key length drop down list fill in 4 Encryption Key WEP fields and click the Apply button For the WPA PSK WPA2 PSK or WPA PSK WPA2 PSK mixed authentication types fill in the Encryption Key PSK field and click the Apply button After clicking the Apply button the wireless channel of DIR 615S will switch to the channel of the wireless access point to which you have connected If the router is connected to the selected network successfully the green indicator appears to the right of the network s SSID in the table After configuring the device as a client you need to create a WAN connection with relevant parameters for the WiFiClient port The step by step description of how to configure the router as a wireless client is available on D Link website To access it click the Configuring router in wireless client mode link in the top part of the page Page 130 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Advanced In this menu you can configure advanced settings of the router
15. MAC A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC address of your computer icon a to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically You can click the Restore default MAC address icon A to set the router s MAC address Page 100 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface IP IP Address Netmask Gateway IP address Primary DNS server Secondary DNS server Isolate connection Enable RIP Enable IGMP Multicast NAT Firewall Ping 192 168 161 228 255 255 255 0 192 168 161 1 192 168 161 140 77 88 8 8 NA El Figure 89 The page for creating a new PPTP Static IP connection The IP section Parameter Description For PPTP Static IP and L2TP Static IP types IP Address Enter an IP address for this WAN connection Netmask Enter a subnet mask for this WAN connection Gateway IP address Enter an IP address of the gateway used
16. Ping lt Y Figure 90 The page for creating a new PPTP Static IP connection The VPN section Parameter Description VPN Select the checkbox to enable auto start of the connection upon the ll i up of the router Username A username login to access the Internet Select the checkbox if you don t need to enter a username and Without authorization password to access the Internet Password A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes VPN server address The IP or URL address of the PPTP or L2TP authentication server Page 103 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter Encryption Authentication Description Select a method of MPPE encryption e No encrypt MPPE encryption is not applied e MPPE 40 128 bit MPPE encryption with a 40 bit or 128 bit key is applied MPPE 40 bit MPPE encryption with a 40 bit key is applied e MPPE 128 bit MPPE encryption with a 128 bit key is applied MPPE encryption can be applied only if the MS CHAP MS CHAP V2 or AUTO value is selected from the Authentication algorithm drop down list Select a required authentication method from the drop down list or algorithm leave the AUTO value MTU The maximum size of units transmitted by the interface Select the checkbox if you want the router
17. Ping the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settings are configured click the Apply button Page 78 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection To create a connection of the IPv6 PPPoE or PPPoE Dual Stack type click the Add button on the Net WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Connection Type IPv6 PPPoE y Interface Internet Ds Name pppoev6_Internet_2 Enable PAI Direction WAN Figure 66 The page for creating a new IPv6 PPPoE connection The General settings section Parameter Description General settings A physical or virtual interface to which the new connection will be Interface assigned Name A name for connection for easier identification Enable Select the checkbox to enable the connection Direction The direction of this connection Page 79 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Ethernet MTU MAC 1500 6c 19 8f 56 d4 b7 via w Figure 67 The page for creating a new IPv6 PPPoE connection The Ethernet section Parameter Description Ethernet MTU The maximum size of units transmitted by the interface MA
18. WAN Qo WAN_v6 Dynamic IPv6 Internet down WAN Delete Add Figure 61 The Net WAN page To create a new connection click the Add button On the page displayed select the needed value from the Connection Type drop down list and specify the relevant values To edit an existing connection left click the relevant line in the table On the page displayed change the parameters and click the Apply button To remove a connection select the checkbox located to the left of the relevant line in the table and click the Delete button Also you can remove a connection on the editing page To use one of existing WAN connections as a default IPv4 gateway select the choice of the Default gateway radio button located in the line corresponding to this connection To use one of existing WAN connections as a default IPv6 gateway select the choice of the Default IPv6 gateway radio button located in the line corresponding to this connection Page 74 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Creating PPPoE WAN Connection To create a connection of the PPPoE type click the Add button on the Net WAN page On the opened page select the PPPoE value from the Connection Type drop down list and specify the needed values General settings Connection Type PPPoE Interface Internet gt Name pppoe_Internet_2 Enable F Direction WAN Figure 62 The page for creating a new PPPoE conn
19. additional device needed to access the Internet is not connected Physical connection error The device is not Notifications in case when the device works with default settings configured Notifications in case of problems of the connection used as the No connection default gateway authorization error the IPS s server does not respond etc Firmware update Notifications in case of update of the device s firmware When you have configured the parameters click the Apply button To disable notifications deselect the Enable checkbox and click the Apply button Page 136 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface DDNS On the Advanced DDNS page you can define parameters of the DDNS service which allows associating a domain name with dynamic IP addresses 0 Advanced DDNS E Hostname DDNS Service Fullhostname User name User password Update period min Add Apply Figure 112 The Advanced DDNS page To add a new DDNS service click the Add button In the line displayed you can specify the following parameters Parameter Description Hostia The part of the domain name specified by a user while registering at a DDNS provider DDNS Service Select a DDNS provider from the drop down list The domain name registered at your DDNS provider The field will Full host name be filled in automatically User name The username to authorize f
20. addresses click the icon Range and enter the starting and ending addresses in the left and right fields correspondingly Destination IP address The destination host subnet IP address To choose a device connected to the router s LAN at the moment select the relevant IP address from the drop down list the field will be filled in automatically If you want to specify a range of IP addresses click the icon Range and enter the starting and ending addresses in the left and right fields correspondingly Ports Source port Destination port A port of the source IP address You can specify one port several ports separated by a comma or a range of ports separated by a colon A port of the destination IP address You can specify one port several ports separated by a comma or a range of ports separated by a colon Click the Apply button To edit a rule for IP filtering click the link to the relevant rule On the opened page change the needed parameters and click the Apply button To remove a rule select the checkbox located to the left of the relevant line in the table and click the Delete button Also you can remove a rule on the editing page Page 150 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Virtual Servers On the Firewall Virtual servers page you can create virtual servers for redirecting incoming Internet traffic to a specified IP addr
21. at A A at esau pad 37 ROULING e tls tee os Ena E E Senay ede Patera ls ws E E Celia ES teas ah weak Sa ual oes ep al a a a a a aa eos wee sa tec 9 TEVO ROUTING ieee dle a tl ries WIS Efe Seated ee A Sieve ONES Wate awe LAD Remote ACCESS to Deviens singe te Shas Mee ae ke a ake ee ee ee eee ee a a LA d MiS COL LAM COU Ses eite cits ee A A bs ee eBags Bley A eee we eae A a eB TREJO Cl Pen tes x vase Sekt AR A A A AAA A Mee Wedded See ate ee LAS LON CONE Manet tote te alah dn eats e E St ates ofa tot de Ane tins A Lack erated A Pi rewa lk Li A week Ape ad alse yet eee cds OT E Guat A id 148 TP ELLET Se a sane es e SAS eke a a ees De ee a See ee ee ses a AS Virtua SOLVIT S ag sitet A A A A dbus Be wat ee tee et Dal DML TS IS Bo aise AA Boe Seles Bel ae ei E eR A OR AA asta Mon Jo XSite We des id eter cl 54 MAG Hei Gir 5 cb take ah sine a TAE wh dhe AE A att ety 55 Contra BAA lek weg Hee E ese dca Senin alte yen oe eve Rich Gee eid a A io ite 157 URL ELISA a aE Sere Sie nea se OD Aghia ek Na eee Be ate he elie eee ome a Seer ga OT Yandex DAS a frag ls Beeler a A SA wa he wea te WANS See VS 159 Internet Protection Settings ta ON See A ee ele a ee See oe Pe ee ed 59 Page 3 of 180 DIR 615S Wireless N300 Router User Manual System oe sce ocd ane tas a Gd Cale 6 pes ein Bae e as A AR dade ele a fee ane 162 Administrator Pas SWEET aia eee ah eile eect Sha ete soe oe Ae 63 CONTTGU BAT LOMS a A ada Jee wees alle Bi
22. by this WAN connection Primary DNS server Secondary DNS server Enter addresses of the primary and secondary DNS servers in the relevant fields Isolate connection When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Enable RIP Select the checkbox to allow using RIP for this connection Enable IGMP Multicast Select the checkbox to allow multicast traffic from the external network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for NAT all computers of your LAN Select the checkbox to enable protection against ARP and DDoS Firewall attacks Select the checkbox to allow the router to answer ping requests Ping from the external network through this connection For security reasons it is recommended not to select this checkbox Page 101 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter Description For PPTP Dynamic IP and L2TP Dynamic IP types Obtain DNS server addresses automatically Primary DNS server Secondary DNS server Vendor ID Select the checkbox to configure automatic assignment of DNS server addresses If the checkbox is selected the Primary DNS server and Secondary DNS server fields are not displayed Enter addresses of the primary and secondary DNS se
23. checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settings are configured click the Apply button Page 105 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface LAN To configure the router s local interface proceed to the Net LAN page IP Address 192 168 0 1 Netmask 255 255 255 0 IPv6 address Figure 91 Basic settings of the local interface If needed edit the basic settings of the local interface Parameter Description The IP address of the router in the local subnet By default the IP Address following value is specified 192 168 0 1 The mask of the local subnet By default the following value is specified 255 255 255 0 The IPv6 address of the router in the local subnet By default the following value is specified d01 1 64 The field is available for editing if the DHCP PD checkbox is not selected IPv6 address When needed settings are configured click the Apply button In the DHCP server section you can configure the built in DHCP server of the router DHCP server Mode Enable M DNS Relay 7 Start IP 192 168 0 2 End IP 192 168 0 100 Lease time min 1440 Figure 92 The section for configuring the DHCP server Parameter Description An operating mode of the
24. fourth which will be used for Default Key ID WEP encryption Encryption Key WEP as Select the checkbox to set a hexadecimal number as a key for HEX encryption The length of WEP encryption key Select the value 64bit to specify keys containing 5 ASCII symbols WEP key length or 10 HEX symbols Select the value 128bit to specify keys containing 13 ASCII symbols or 26 HEX symbols Keys for WEP encryption The router uses the key selected from the Default Key ID drop down list It is required to specify all the fields Encryption Key WEP 1 4 Page 114 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface When the WPA PSK WPA2 PSK or WPA PSK WPA2 PSK mixed value is selected the WPA Encryption settings section is displayed Wi Fi Security settings Network Authentication Encryption Key PSK 4 WPA2 PSK 12345670 WPA Encryption settings WPA Encryption WPA renewal AES Z 3600 Apply Figure 99 The WPA2 PSK value is selected from the Network Authentication drop down list Parameter Description Encryption Key PSK A key for WPA encryption The key can contain digits and or Latin characters WPA Encryption An encryption method TKIP AES or TKIP AES For the wireless network operating modes which support 802 11n standard see the value of the Wireless mode drop down list on the Wi Fi Basic settings page the AES value is on
25. in the safe mode there will be blocked websites which try to steal your passwords e g for social networks and websites which can infect your computers For the devices in the child mode there also will be blocked websites containing adult media It is recommended to enable this mode for devices used by children Learn more about Yandex DNS on dns yandex ru Figure 129 The Yandex DNS Internet protection settings Settings page To enable the Yandex DNS service select the Enabled checkbox on the Yandex DNS Internet protection settings Settings page Page 159 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual When the checkbox is selected the Default mode selection section is displayed on the page Select the needed choice of the radio button to configure filtering for all devices of the router s network e Safe mode when this value is selected the service blocks access to malicious and fraudulent web sites e Child mode when this value is selected the service blocks access to malicious and fraudulent web sites and blocks access to adult content e Protection off when this value is selected the service provides the DNS server with no restrictions on access to unsafe web sites Also the selected filtering mode will be applied to all devices newly connected to the router s network If you need to specify a filtering mode for each device separately create relevant rules To do
26. manual Before You Begin A reference to a chapter or section of this manual Quick Installation Q A reference to a document Guide A name of a menu menu item control field checkbox drop down Change list button etc 192 168 0 1 Data that you should enter in the specified field l Information An important note Document Structure Chapter 1 describes the purpose and structure of the document Chapter 2 gives an overview of the router s hardware and software features describes its appearance and the package contents Chapter 3 explains how to install the router DIR 615S and configure a PC in order to access its web based interface Chapter 4 describes all pages of the web based interface in detail Chapter 5 includes safety instructions and tips for networking and connecting additional equipment Chapter 6 introduces abbreviations and acronyms used in this manual Page 5 of 180 DIR 615S Wireless N300 Router User Manual Overview CHAPTER 2 OVERVIEW General Information The DIR 615S device is a wireless router with a built in 4 port switch It provides a fast and simple way to create a wireless and wired network at home or in an office You are able to connect the wireless router DIR 615S to a cable or DSL modem or to a private Ethernet line and use a high speed Internet connection to successfully fulfill a wide range of professional tasks The built in 4 port switch enables you to conn
27. page To disable access via TELNET deselect the On checkbox and click the Apply button To enable access via TELNET again select the On checkbox In the Port field enter the number of the router s port through which access will be allowed by default the port 23 is specified Then click the Apply button Page 175 of 180 DIR 615S Wireless N300 Router User Manual Operation Guidelines CHAPTER 5 OPERATION GUIDELINES Safety Instructions Place your router on a flat horizontal surface or mount the router on the wall the mounting holes are located on the bottom panel of the device Make sure that the router is provided with sufficient ventilation To prevent overheating do not obstruct the ventilation openings of the router Plug the router into a surge protector to reduce the risk of damage from power surges and lightning strikes Operate the router only from an electrical outlet with the correct power source as indicated on the adapter Do not open the cover of the router Otherwise any warranty will be invalidated Unplug the equipment before dusting and cleaning Use a damp cloth to clean the equipment Do not use liquid aerosol cleaners or magnetic static cleaning devices Page 176 of 180 DIR 615S Wireless N300 Router User Manual Operation Guidelines Wireless Installation Considerations The DIR 615S device lets you access your network using a wireless connection from virtually anywhere within the ope
28. settings Enable Encryption WEP E Network Authentication WPA2 PSK AES WPA PSK WPA2 PSK mixed TKIP AES WPA PSK WPA2 PSK mixed TKIP AES Figure 107 The page for configuring the client mode Page 128 of 180 Signal level all 62 16 12 Apply DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface To configure the router as a client select the Enable client checkbox When the checkbox is selected the following fields are displayed on the page Parameter Description If the checkbox is not selected devices cannot connect to the router s WLAN Upon that the router can connect to another access point as a wireless client Broadcast wireless network Wireless network settings The name of the network to which the router connects The unique identifier of the network to which the router connects Network Authentication The authentication type of the network to which the router connects When the Open or Shared authentication type is selected the following fields are available Parameter Description The checkbox activating WEP encryption When the checkbox is selected the Default Key ID field the Encryption Key WEP as Enable Encryption WEP HEX checkbox the WEP key length drop down list and four Encryption Key WEP fields are displayed on the page For the Shared authentication type the checkbox is always se
29. the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically You can click the Restore default MAC address icon A to set the router s MAC address Page 90 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface IP IPv6 address Gateway IPv6 address Primary IPv6 DNS server Secondary IPv6 DNS server Figure 79 The page for creating a new Static IPv6 connection The IP section Parameter Description IP For Static IPv6 type IPv6 address Gateway IPv6 address Primary IPv6 DNS server Secondary IPv6 Enter an IPv6 address for this WAN connection Enter an IPv6 address of the gateway used by this WAN connection Enter addresses of the primary and secondary IPv6 DNS servers in the relevant fields DNS server For Dynamic IPv6 type Select a method for IPv6 address assignment from the drop down Get IPv6 list or leave the Automatically value Gateway by SLAAC Select the checkbox to automatically assign the IPv6 gateway address with help of SLAAC Stateless Address Autoconfiguration Static IPv6 gateway address Obtain DNS server addresses automatically Static primary DNS server Static secondary DNS server The static address of the IPv6 gateway The field is available fo
30. the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically You can click the Restore default MAC address icon A to set the router s MAC address Page 94 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface IP IP Address Netmask Gateway IP address Primary DNS server Secondary DNS server Figure 83 The page for creating a new PPPoE Static IP connection The IP section Parameter Description IP For PPPoE Static IP type IP Address Enter an IP address for this WAN connection Netmask Enter a subnet mask for this WAN connection Gateway IP address Enter an IP address of the gateway used by this WAN connection Primary DNS server Secondary DNS server Enter addresses of the primary and secondary DNS servers in the relevant fields For PPPoE Dynamic IP type Obtain DNS server addresses automatically Select the checkbox to configure automatic assignment of DNS server addresses If the checkbox is selected the Primary DNS server and Secondary DNS server fields are not displayed Primary DNS server Secondary DNS server Enter addresses of the primary and secondary DNS servers in the relevant fields Vendor ID Hostname
31. to keep you connected to a your ISP even when the connection has been inactive for a specified Keep Alive Extra options Dial on demand period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Advanced options of the pppd daemon which need to be specified for this connection Optional Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated Static IP Address PPP debug IP received Fill in the field if you want to use a static IP address to access the Internet Select the checkbox if you want to log all data on PPP connection debugging The IP address assigned by the ISP Isolate connection When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Enable RIP Select the checkbox to allow using RIP for this connection Page 104 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter NAT Description Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Firewall Ping Select the checkbox to enable protection against ARP and DDoS attacks Select the
32. to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPPoE WAN Connection section page 75 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 37 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface IPv6 PPPoE or PPPoE Dual Stack Connection Home Click n Connect Connection name pppoev6 Username Password lo Password confirmation Static IPv6 gateway address SLAAC Vv Erpes lt Back Next gt Figure 26 Configuring IPv6 PPPoE WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP If you need to specify the gateway address manually deselect the SLAAC checkbox and fill in the Static IPv6 gateway address field As a tule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the
33. to the Control URL filter URL addresses page Page 157 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Q Control URL filter URL addresses URL addresses list URL address Add Firewall IP filters Apply Figure 128 The Control URL filter URL addresses page Click the Add button and enter an address in the field displayed Then click the Apply button To remove an address from the list of URL addresses select the checkbox located to the left of the relevant URL address and click the Delete button Then click the Apply button Page 158 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Yandex DNS This menu is designed to configure the Yandex DNS service Yandex DNS is a web content filtering service which provides the DNS server protect a computer against malicious web sites and block access to adult web sites Click the About yandex DNS link in the Yandex DNS section to get detailed information on the service Internet Protection Settings On the pages of the Yandex DNS Internet protection settings section you can enable the Yandex DNS service and configure its operating mode Yandex DNS Internet protection settings Settings Yandex DNS Va n dex Enabled E Default mode selection 9 Safe mode 5 Child mode Protection off All new devices will be connected in the selected mode For the devices
34. type can connect to the WLAN of the router WPA PSK WPA2 PSK mixed The WPA WPA2 m server A mixed type of authentication When this value is selected devices using the WPA PSK authentication type and devices using the WPA2 PSK authentication type can connect to the WLAN of the router _ and WPA WPA2 mixed authentication types require a RADIUS Page 113 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual When the Open or Shared value is selected the WEP Encryption settings section is displayed the section is unavailable for the wireless network operating modes which support the standard 802 11n Wi Fi Security settings Network Authentication Open X WEP Encryption settings Enable Encryption WEP Til Default Key ID 2 Encryption Key WEP as HEX E WEP key length 64bit y Kntoy wudbposaHua WEP 1 Knroy wudposanua WEP 2 Kntoy wudbposanua WEP 3 Kno wngposanna WEP 4 Apply Figure 98 The Open value is selected from the Network Authentication drop down list Parameter Description The checkbox activating WEP encryption When the checkbox is selected the Default Key ID field the Encryption Key WEP as Enable Encryption WEP HEX checkbox the WEP key length drop down list and four Encryption Key WEP fields are displayed on the page For the Shared authentication type the checkbox is always selected The number of the key from first to
35. value and click the Apply button To remove an existing route select the checkbox located to the left of the relevant line in the table and click the Delete button Then click the Apply button Page 140 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Remote Access to Device On the Advanced Remote access to device page you can configure access to the web based interface of the router By default the access from external networks to the router is closed If you need to allow access to the router from the external network create relevant rules Q Advanced Remote access to device El IP address Mask Public port Protocol Add Figure 115 The Advanced Remote access to device page To create a new rule click the Add button Advanced Remote access to device Open access from any external host IP address Mask Public port Protocol HTTP a lt Back Apply Figure 116 The page for adding a rule for remote management Page 141 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface You can specify the following parameters Parameter Open access from any external host Description Select the checkbox to allow access to the router for any host When the checkbox is selected the IP version drop down list is displayed on the page and the IP address and Mask fields are not available for editing An IP version to whic
36. your Wi Fi Hide Access Point network It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN A name for the WLAN By default the value DIR 615 is specified It is recommended to specify another name for the network upon initial configuration use digits and Latin characters Country The country you are in Select a value from the drop down list The wireless channel number When the auto value is selected the Channel f router itself chooses the channel with the least interference Operating mode of the wireless network of the router This Wireless mode parameter defines standards of the devices that will be able to use your wireless network Select a value from the drop down list The maximum number of devices connected to the wireless network Max Associated Clients of the router When the value 0 is specified the device does not limit the number of connected clients Select the checkbox to forbid wireless clients of your WLAN to communicate to each other Clients Isolation When you have configured the parameters click the Apply button Page 111 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Security Settings On pages of the Wi Fi Security settings section you can modify security settings of the WLAN Wi Fi Security settings Network Authentication WPA2 PSK y Encryption Key PSK 12345670 WP
37. 00 Router User Manual Configuring via Web based Interface PPP Username Without authorization Password Password confirmation Service name Authentication algorithm MTU Keep Alive LCP interval sec LCP fails Dial on demand PPP IP extension Static IP Address PPP debug E AUTO x 1492 Y 30 3 A 7 Figure 64 The page for creating a new PPPoE connection The PPP section Parameter Description PPP Username A username login to access the Internet Without authorization Password Select the checkbox if you don t need to enter a username and password to access the Internet A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes Service name Authentication The name of the PPPoE authentication server Select a required authentication method from the drop down list or algorithm leave the AUTO value MTU The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified Keep Alive period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Dial on demand PPP IP extension Select the checkbox if you want the router to establish connection to the Internet on demand
38. 261 da23 6c 62 6d 7d 26 a1 4m 49s Figure 56 The Status DHCP page Page 69 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Routing Table The Status Routing table page displays the information on routes The table contains destination IP addresses gateways subnet masks and other data Status Routing table interface Destination Gateway Mask Flags Metric LAN 192 168 0 0 0 0 0 0 255 255 255 0 U 0 LAN fd01 164 U 256 LAN fd00 8 U 256 Figure 57 The Status Routing table page Page 70 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Clients On the Status Clients page you can view the list of devices connected to the router and devices accessing its web based interface Status Clients IP address Flags MAC address Interface 192 168 0 8 reachable 84 c9 b2 7c d6 af WLAN Figure 58 The Status Clients page For each device the following data are displayed the IP address the MAC address and the interface to which the device is connected Page 71 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Active Sessions On the Status Active sessions page you can view information on current sessions in the router s network For each session the following data are displayed a protocol for network packet transmission a source IP address and port a destination IP address and port
39. 615S Wireless N300 Router Installation and Connection User Manual 3 In the Local Area Connection Properties window on the General tab select the Internet Protocol TCP IP line Click the Properties button 4 Local Area Connection 2 Properties EJES General Authentication Advanced Connect using E D Link DFE 550TX 10 100 Adapter A This connection uses the following items O SF NWLink NetBIOS A SF NWLink IP lt SPX NetBIOS Compatible Transport Prot mM Internet Protocol TCP IP lt Description Transmission Control Protocol Internet Protocol The default wide area network protocol that provides communication across diverse interconnected networks a Show icon in notification area when connected Figure 4 The Local Area Connection Properties window Page 15 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection 4 Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons Click the OK button Internet Protocol TCP IP Properties PP a General Alternate Configuration You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address Figure 5 The Internet Protocol TCP IP Pro
40. 8 PPTP Dynamic LP 0 L2TP gt Dynamic TP Connection ne it eis ee ate ah oe checking Internet Ayailapititye seekar es ete area ee A A A Cielo SR ees a ie Songs ee ada 53 Configuring Yandex DNS SEEV ECC i ed Bees a ata Se Swe we Gad Be ce wd oo Av aed Seals 54 Contigurino Wireless Connections etansa ee eel eats Share Sia ape oleae Sede a Ga edn Wale wale as 55 CONE LGUL ING LPI VA A A SURI Levee Bate ind atte Marte a eee 58 Wireless Network Settings Wizard ccc ee ec ee ee ee tee eens 59 AGCSS s POE ts Mod A svete a o a ee eet eels Ses ates en ghee se 60 Client Mode e ii a e AA te dead eos MEA wea Gets teed baud id dake i 62 Virtual Server Settings Wizard eosi ns a a Meee ne SS ee ti 65 IPTV Settings Wiza rd tataie Vali A e 67 Page 2 of 180 DIR 615S Wireless N300 Router User Manual SEAS A SE AAA dle iw Roa bes NR ees heal GS Wie ais 4 SSS 68 NetWork Sta bustiCswacitd ne oes A hn fia seen ne hatha A oie tele AS 68 DC Pra ale aes a fea Saran bec Soe Gas deg A A con aE A A aye A ea 69 Routing Rao Ls ds a a A Ta alter eves wins elem A A A aed AO is Gade ae 70 ELLE rn oldie A Bone A tat be BL Bed det 71 ACEITE SES SLOAN pis td 72 Muttuicast GLOBOS A A Sel Head a ees oe eae ae Pee eee he eee 73 ING Gi O A a el ba tol gigi ate i Dba aed 74 WAN S i ser as Sei te or Soe A ae sen aer aos le a ue ra TO eh ol aide o seule sey Santas A ton enh TEA as at 74 Creating PPPOE
41. 9 Click the Next button to continue Page 51 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual QG Home Click n Connect Connection name dynpptp Username Password Password confirmation VPN server address Expert Back Next gt Figure 40 Configuring PPTP Dynamic IP WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP In the VPN server address field enter the IP or URL address of the PPTP or L2TP authentication server As a rule the specified settings are enough to configure a protected connection the VPN tunnel If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPTP L2TP Static IP or PPTP L2TP Dynamic IP WAN Connection section page 99 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 52 of 180 DIR 615S Wireless
42. A Encryption settings WPA Encryption AES y WPA renewal 3600 Apply Figure 96 The default security settings By default the WPA2 PSK network authentication type is specified for both bands of the WLAN WPS PIN from the barcode label is used as the network key Wi Fi Security settings Network Authentication Open y Shared WEP Encryption settings WPA WPA PSK WPA2 WPA2 PSK WPA WPA2 mixed WPA PSK WPA2 PSK mixed Enable Encryption WEP Apply Figure 97 Network authentication types supported by the router Page 112 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface The router supports the following authentication types Authentication type Description Open authentication with WEP encryption for wireless network Open f modes not supporting 802 11n devices Shared key authentication with WEP encryption This authentication Shared type is not available when on the Wi Fi Basic settings page ofi the relevant band in the Wireless mode drop down list a mode supporting 802 11n devices is selected WPA WPA based authentication using a RADIUS server WPA PSK WPA based authentication using a PSK WPA2 WPA2 based authentication using a RADIUS server WPA2 PSK WPA2 based authentication using a PSK WPA WPA2 mixed A mixed type of authentication When this value is selected devices using the WPA authentication type and devices using the WPA2 authentication
43. C A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC address of your computer icon a to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically You can click the Restore default MAC address icon A to set the router s MAC address Page 80 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface PPP Username Without authorization Password Password confirmation Service name Authentication algorithm MTU Keep Alive LCP interval sec LCP fails Dial on demand PPP IP extension AUTO M 1492 Y 30 3 T E Figure 68 The page for creating a new IPv6 PPPoE connection The PPP section Parameter Username Description PPP A username login to access the Internet Without authorization Select the checkbox if you don t need to enter a username and password to access the Internet Password Password confirmation Service name A password to access the Inte
44. CWMin CWMax Txop ACM Ack AC_BK 7 1 1023 0 Off Off AC_BE 15 63 0 Off Off AC_VI 1 7 15 94 Off Off AC 1 Fa 47 Off Off AC Aifsn 1 15 CWMin CWMax Txop ACM AC_BK 7 15 1023 0 Off AC_BE 3 15 1023 0 Off AC_VI 2 7 15 94 Off AC_VO 2 7 47 Off Apply Figure 106 The page for configuring the WMM function All needed settings for the WMM function are specified in the device s system It is m recommended not to change the default values The WMM function allows assigning priorities for four Access Categories AC AC_BK Background low priority traffic print jobs file downloads etc e AC_BE Best Effort traffic from legacy devices or devices applications that do not support QoS AC_VI Video AC_VO Voice Parameters of the Access Categories are defined for both the router itself in the Parameters of Access Point section and wireless devices connected to it in the Parameters of Station section Page 126 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual For every Access Category the following fields are available Parameter Description Arbitrary Inter Frame Space Number This parameter influences Aifsn time delays for the relevant Access Category The lower the value the higher is the Access Category priority Contention Window Minimum Contention Window Maximum Both fields influence time delays for the relevant Access Category The CWMax field value should not
45. Connections window 2 Select the icon of the wireless network connection and make sure that your Wi Fi adapter is on Network Connections File Edit View Favorites Tools Advanced Help Q gt JO search gt Folders 737 Name Type Q LAN or High Speed Internet E Create a new connection Wireless Network Connection LAN or High Speed Internet 2 eiea Pee lt b 1394 Connection LAN or High Speed Internet Change Windows Firewall lt b Local Area Connection LAN or High Speed Internet tee Kp View available wireless networks 5 Disable this network device a Repair this connection Rename this connection 2 Change settings of this connection mee ns A Figure 11 The Network Connections window 3 Search for available wireless networks 4 In the opened Wireless Network Connection window select the wireless network DIR 615 and click the Connect button 5 In the opened window enter the network key see WPS PIN on the barcode label on the bottom panel of the device in the Network key and Confirm network key fields and click the Connect button After that the Wireless Network Connection Status window appears If you perform initial configuration of the router via Wi Fi connection note that immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings Page 22 of 180 DIR 615S Wireless N300 Router
46. Home Wireless network settings wizard Select an operating mode for the wireless network Mode 9 Access point Client Turn off Next gt Figure 47 The page for selecting the operating mode for the wireless network If you are not going to use the wireless connection select the Turn off choice of the Mode radio button Click the Next button and then click the Apply button on the opened page After clicking the button the Home Information page opens If you want to connect portable devices to the Internet via wireless connection select the Access point choice of the Mode radio button Click the Next button If you want to configure the router as a client to connect to a wireless access point select the Client choice of the Mode radio button Click the Next button Page 59 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Access Point Mode On the opened page in the SSID field specify a new name for the network use digits and Latin characters Home Wireless network settings wizard Enter the name of the access point SSID lt Back Next gt Figure 48 Page for changing the name of the wireless LAN Click the Next button to continue Page 60 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual On the next page you can modify security settings of the WLAN Select the Protected value from the Network Authentication dro
47. In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated This option is used by some ISPs Contact your ISP to clarify if this checkbox needs to be enabled Page 77 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter Static IP Address Description Fill in the field if you want to use a static IP address to access the Internet PPP debug Miscellaneous Isolate connection Enable RIP Enable IGMP Multicast NAT Firewall Ping Select the checkbox if you want to log all data on PPP connection debugging o ARAA Figure 65 The page for creating a new PPPoE connection The Miscellaneous section Parameter Isolate connection Description Miscellaneous When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Enable RIP Select the checkbox to allow using RIP for this connection Enable IGMP Multicast Select the checkbox to allow multicast traffic from the external network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for NAT all computers of your LAN Select the checkbox to enable protection against ARP and DDoS Firewall attacks Select the checkbox to allow the router to answer ping requests from
48. Installation and Connection Control Description E Click the icon to save new settings to the non volatile memory Also you can save the device s parameters via the Save button on Save the System Configuration page viz an e Click the icon to reboot the device All unsaved changes will be lost Reboot device tal Get config backup after the device s reboot Click the icon to save the configuration all settings of the router to your PC The configuration backup will be stored in the download location of your web browser Also you can create the configuration backup via the Backup button on the System Configuration page Ez Restore config pit Reset to factory a Update firmware N Wi Fi ES Logout Click the icon to go to the System Configuration page Click the icon to restore the factory default settings Also you can restore the factory defaults via the Factory button on the System Configuration page Also you can restore the factory default settings via the hardware RESET button The button is located on the bottom panel of the router Push the button with the router powered on and hold for 10 seconds Then release the button Click the icon to update the firmware of the router Also you can update the firmware on the System Firmware upgrade page Click the icon to disable or enable the device s WLAN Also you can disable enable the router s WLAN on the Wi Fi Basic sett
49. Interface Advanced VLAN Name Enable Type VLAN ID QoS Tagged port Untagged ports JO Bridge gt 0 gt internet gt E port3 j port4 lt Back Apply Figure 109 The page for adding a group of ports for VLAN You can specify the following parameters Parameter Name Enable Type Description A name for the port for easier identification Select the checkbox to allow using this group of ports The type of the VLAN Untagged NAT The group of this type is an external connection with address translation It is mostly used to transmit untagged traffic When this value is selected the VLAN ID field and the QOS Tagged port drop down lists are not displayed Tagged NAT The group of this type is an external connection with address translation It is mostly used to connect to the Internet Later the VLAN which identifier is specified in the VLAN ID field is used to create a WAN connection on the Net WAN page When this value is selected the Untagged ports section is not displayed Bridge The group of this type is a transparent connection between an internal port and an external connection It is mostly used to connect IPTV set top boxes VLAN ID An identifier of the VLAN to which this group of ports will be assigned QoS A priority tag for the type of traffic transmitted Page 133 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interf
50. Internet LAN1 LAN2 LAN3 LAN4 If you are not going to use IP TV click Skip to next Next gt Skip to next Figure 46 Selecting a LAN port to connect an IPTV set top box On the opened page select the LAN port of the router to which you will connect your IPTV set top box If in the future you need to disconnect your IPTV set top box from the specified LAN port and connect to it a computer start the IPTV settings wizard for the detailed description of the Wizard see the IPTV Settings Wizard section page 67 If for accessing the Internet and IPTV services your ISP uses virtual local area networks with identifiers VLAN ID to configure access to the IPTV service proceed to the Advanced VLAN page create a group of ports with the required value of the VLAN ID parameter the Bridge type and the port to which the set top box will be connected see the VLAN section page 132 for a detailed description of the elements from the page Click the Next button to continue Click the Skip to next button in order not to apply the IPTV settings Click the Apply button to save the specified settings After clicking the Apply button the Home Information page opens Page 58 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Wireless Network Settings Wizard To specify all needed settings for your wireless network click the Wireless network settings wizard link in the Home section
51. MHz 802 11n devices operate at 20MHz and 40MHz channels the channel is combined with the previous adjacent channel 20 40MHz 802 11n devices operate at 20MHz and 40MHz channels the channel is combined with the next adjacent channel Guard interval in nanoseconds This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices Enable the router uses the 400 ns short guard interval For the wireless network operating modes which support 802 11n standard only see the value of the Wireless mode drop down list on the Wi Fi Basic settings page Disable the router uses the 800 ns standard guard interval Adaptivity Mode Select the checkbox to prevent your wireless network from interfering with radars and other mobile or stationary radio systems Such a setting can slow down the router s WLAN When you have configured the parameters click the Apply button Page 125 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual WMM On the Wi Fi WMM page you can enable the Wi Fi Multimedia function The WMM function implements the QoS features for Wi Fi networks It helps to improve the quality of data transfer over Wi Fi networks by prioritizing different types of traffic To enable the function select the WMM checkbox and click the Apply button Wi Fi WMM WMM Y Parameters of Access Point AC Aifsn 1 15
52. N300 Router Configuring via Web based Interface User Manual Checking Internet Availability On the page you can check the WAN connection you have created Home Click n Connect Checking the Internet availability with the ping utility Address google com Result Checking the cable the cable is plugged Connection status up Checking the host availability available Congratulations You are successfully connected to the Internet Recheck lt Back Next gt Figure 41 Checking the Internet availability In the Result section the status of the WAN connection and possible causes of malfunctions are displayed To recheck the status of the WAN connection enter the IP address or name of a host in the Address field or leave the value specified by default google com for IPv4 connections ipv6 google com for IPv6 connections Then click the Recheck button Click the Back button to specify other settings Click the Next button to continue After clicking the Next button the page for configuring the Yandex DNS service opens see the Configuring Yandex DNS Service section page 54 Page 53 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Configuring Yandex DNS Service On the page you can enable the Yandex DNS service and configure its operating mode Q Home Click n Connect Yandex DNS Ya n d ex Enable Yandex DNS El Default mode selection Safe mode 5 Chi
53. Prevention of ARP and DDoS attacks Virtual servers Built in Yandex DNS web content filtering service VPN IPSec PPTP L2TP PPPoE pass through Management Local and remote access to settings through TELNET WEB HTTP HTTPS Multilingual web based interface for configuration and management Notification on connection problems and auto redirect to settings Firmware update via web based interface Automatic notification on new firmware version Saving restoring configuration to from file Support of remote logging Automatic synchronization of system time with NTP server and manual time date setup Ping function Traceroute utility TR 069 client Wireless Module Parameters Standards IEEE 802 11b g n Frequency range 2400 2483 5MHz Wireless connection security WEP WPA WPA2 Personal Enterprise MAC filter WPS PBC PIN Advanced functions Support of client mode WMM Wi Fi QoS Managing connected stations Advanced settings Wireless connection rate IEEE 802 11b 1 2 5 5 and 11Mbps IEEE 802 11g 6 9 12 18 24 36 48 and 54Mbps IEEE 802 11n from 6 5 to 300Mbps from MCSO to MCS15 Transmitter output power The maximum value of the transmitter output power depends upon the radio frequency regulations applied in your country 802 11b typical at room temperature 25 C 15dBm 1 5dB at 1 2 5 5 11Mbps 802 11g typical at room temperature 25 C 15dBm
54. R 615S Wireless N300 Router User Manual Configuring via Web based Interface Miscellaneous Isolate connection Enable RIP Firewall Ping O E g Figure 72 The page for creating a new Pv6 PPPoE connection The Miscellaneous section Parameter Isolate connection Enable RIP Description Miscellaneous When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Select the checkbox to allow using RIP for this connection Enable IGMP Multicast For the PPPoE Dual Stack type only Select the checkbox to allow multicast traffic from the external network e g video streaming to be received NAT Firewall Ping For the PPPoE Dual Stack type only Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settings are configured click the Apply button Page 84 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Creating Static IP or Dynamic IP WAN Connection To create a connection of the Static IP or Dynamic IP type click the Add button on the Ne
55. Router User Manual Configuring via Web based Interface Using WPS Function via Web based Interface To add a wireless device via the PIN method of the WPS function follow the next steps 1 Select the WPS Enable checkbox 2 Click the Apply button 3 Select the PIN value from the WPS Method drop down list 4 Select the PIN method in the software of the wireless device that you want to connect to the router s WLAN 5 Click the relevant button in the software of the wireless device that you want to connect to the WLAN 6 Right after that enter the PIN code specified on the cover of the wireless device or in its software in the PIN Code field 7 Click the Connect button in the web based interface of the router To add a wireless device via the PBC method of the WPS function follow the next steps 1 Select the WPS Enable checkbox 2 Click the Apply button 3 Select the PBC value from the WPS Method drop down list 4 Select the PBC method in the software of the wireless device that you want to connect to the router s WLAN 5 Click the relevant button in the software or press the WPS button on the cover of the wireless device that you want to connect to the WLAN 6 Click the Connect button in the web based interface of the router Using WPS Function without Web based Interface You can add a wireless device to the router s WLAN without accessing the web based interface of the router To do this you need to configu
56. SP s Ethernet cable to the WAN Internet port of the device Please make sure that the WAN light is lit before clicking Next Next gt Figure 23 Configuring connection to the Internet Connect the Ethernet cable provided by your ISP to the WAN port of the router Verify the relevant LED the Internet LED should be on Click the Next button to continue Page 35 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Home Click n Connect Select connection type 9 Connection type is not selected D PPPoE IPv6 PPPoE D PPPoE Dual Stack Static IP gt Dynamic IP Static IPv6 Figure 24 The page for selecting the connection type On the opened page select the needed choice of the radio button and click the Next button Page 36 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Creating WAN Connection PPPoE Connection Home Click n Connect Connection name pppoe Username Password Password confirmation Expert xpe lt Back Next gt Figure 25 Configuring PPPoE WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP As a rule the specified settings are enough to configure a connection of the selected type If you need
57. TION AND CONNECTION Before You Begin Please read this manual prior to installing the device Make sure that you have all the necessary information and equipment Operating System Configuration of the wireless router DIR 615S with a built in 4 port switch hereinafter referred to as the router is performed via the built in web based interface The web based interface is available from any operating system that supports a web browser Web Browser The following web browsers are recommended e Apple Safari 5 and later e Google Chrome 5 and later e Microsoft Internet Explorer 8 and later e Mozilla Firefox 5 and later e Opera 10 and later For successful operation JavaScript should be enabled on the web browser Make sure that JavaScript has not been disabled by other software such as virus protection or web user security packages running on your computer Wired or Wireless NIC Ethernet or Wi Fi Adapter Any computer that uses the router should be equipped with an Ethernet or Wi Fi adapter NIC If your computer is not equipped with such a device install an Ethernet or Wi Fi adapter prior to using the router Wireless Connection Wireless workstations from your network should be equipped with a wireless 802 11b g or n NIC Wi Fi adapter In addition you should specify the values of SSID channel number and security settings defined in the web based interface of the router for all these wireless workstations Page 13 o
58. Wireless N300 Router User Manual Abbreviations and Acronyms CHAPTER 6 ABBREVIATIONS AND ACRONYMS AC Access Category AES Advanced Encryption Standard ARP Address Resolution Protocol BSSID Basic Service Set Identifier CRC Cyclic Redundancy Check DDNS Dynamic Domain Name System DDoS Distributed Denial of Service DHCP Dynamic Host Configuration Protocol DMZ DeMilitarized Zone DNS Domain Name System DTIM Delivery Traffic Indication Message GMT Greenwich Mean Time IGD Internet Gateway Device IGMP Internet Group Management Protocol IP Internet Protocol ISP Internet Service Provider L2TP Layer 2 Tunneling Protocol LAN Local Area Network LCP Link Control Protocol MAC Media Access Control MTU Maximum Transmission Unit NAT Network Address Translation NTP Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing PBC Push Button Configuration PIN Personal Identification Number PPPoE Point to point protocol over Ethernet Page 179 of 180 DIR 615S Wireless N300 Router Abbreviations and Acronyms User Manual PPTP Point to point tunneling protocol PSK Pre shared key QoS Quality of Service RADIUS Remote Authentication in Dial In User Service RTS Request To Send RTSP Real Time Streaming Protocol SIP Session Initiation Protocol SSID Servi
59. ace Parameter Description Tagged port From the list select an available value to assign it to this group Untagged ports The section includes the ports a physical port of the router the wireless interface that can be added to the group To add a port to the group select the needed checkbox located to the left of the relevant port To remove a port from the group deselect the needed checkbox located to the left of the relevant port Click the Apply button To edit or remove an existing group select the relevant group on the Advanced VLAN page On the page displayed change the parameters and click the Apply button or click the Delete button Page 134 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface UPnP IGD On the Advanced UPnP IGD page you can enable the UPnP IGD protocol The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router Advanced UPnP IGD Enabled Zi IPv4 IGD Protocol IP Private port Public port Comments UDP 192 168 0 2 61859 61859 NAT PMP 61859 udp TCP 192 168 0 2 61859 61859 NAT PMP 61859 tcp Apply Figure 110 The Advanced UPnP IGD page If you want to manually specify all parameters needed for network applications deselect the Enabled checkbox and click the Apply button If you want to enable the UPnP IGD protocol in
60. ach client is displayed when the mouse pointer is over an icon If you want to assign the current IP address to the MAC address of the client drag and drop its icon to the static clients area USERIYou Static Clients The Static Clients area displays all static clients An icon of a client displays the name of a device its MAC address and received IP address The list of actions available for each client is displayed when the mouse pointer is over an icon If you want to break the binding between the MAC address of the client and its current IP address drag and drop its icon to the dynamic clients area Use the Add client button to add static clients Page 33 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Control Wireless Wireless Client Mode Client mode 9 Y Wi Fi Filter Description The Wireless element displays information on Wi Fi module operation To the left the name of the access point is displayed You can change it in the editing mode Use the Hide Access Point switch to forbid or allow other users to see your wireless network Use the Enable Disable Wireless switch to enable or disable your wireless network To the right the standards of devices which can connect to the access point are displayed You can select other standards from the drop down list Use the Enable Disable password protection switch to mod
61. age 44 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Home Click n Connect Connection name pppoe Username Password Password confirmation Expert lt Back Next gt Figure 33 Configuring PPPoE Static IP WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPPoE Static IP or PPPoE Dynamic IP WAN Connection section page 93 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 45 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface PPPoE Dynamic IP Connection Home Click n Connect Obtain DNS server addresses 7 automatically Ti z
62. ased Interface Parameter PPP IP extension Description This option is used by some ISPs Contact your ISP to clarify if this checkbox needs to be enabled Static IP Address PPP debug Fill in the field 1f you want to use a static IP address to access the Internet Select the checkbox if you want to log all data on PPP connection debugging Miscellaneous Isolate connection Enable RIP Enable IGMP Multicast NAT Firewall Ping K Figure 86 The page for creating a new PPPoE Static IP connection The Miscellaneous section Parameter Isolate connection Enable RIP Description Miscellaneous for PPP section When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Select the checkbox to allow using RIP for this connection Enable IGMP Multicast Select the checkbox to allow multicast traffic from the external network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for NAT all computers of your LAN Select the checkbox to enable protection against ARP and DDoS Firewall attacks Select the checkbox to allow the router to answer ping requests from Ping the external network through this connection For security reasons it is recommended not to select this checkbox When all needed setti
63. be lower than the CWMin field value The lower the difference between the CWMax field value and the CWMin field value the higher is the Access Category priority CWMin CWMax Transmission Opportunity The higher the value the higher is the Txo o P Access Category priority Admission Control Mandatory ACM If on prevents from using the relevant Access Category Acknowledgment Answering response requests while transmitting Displayed only in the Parameters of Access Point section Ack If off the router answers requests If on the router does not answer requests When you have configured the parameters click the Apply button Page 127 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Client On the Wi Fi Client page you can configure the router as a client to connect to a wireless access point As a rule the client mode is used to connect to a WISP network All parameters specified on this page should be provided by your WISP Wi Fi Client gt Configuring router in wireless client mode Enable client E Broadcast wireless network 7 Select the wireless network SSID BSSID Wireless Channel mode DIR 620G 00 90 12 12 15 14 802141b gin 11 dlink 0981 C8 D3 A3 71 09 81 80211bigin 2 dir 300nru 00 0C 43 30 52 D0 80211bign 3 Search Wireless network settings SSID BSSID Network Authentication Open WEP Encryption
64. cation algorithm MTU Keep Alive LCP interval sec LCP fails Dial on demand PPP IP extension Static IP Address PPP debug AUTO M 1492 Figure 85 The page for creating a new PPPoE Static IP connection The PPP section Parameter Username Description PPP A username login to access the Internet Without authorization Password Password confirmation Select the checkbox if you don t need to enter a username and password to access the Internet A password to access the Internet The confirmation of the entered password to avoid mistypes Service name The name of the PPPoE authentication server Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value MTU The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified Keep Alive Dial on demand period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated Page 97 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web b
65. ce Set Identifier TKIP Temporal Key Integrity Protocol UDP User Datagram Protocol UPnP Universal Plug and Play URL Uniform Resource Locator VLAN Virtual Local Area Network VPN Virtual Private Network WAN Wide Area Network WEP Wired Equivalent Privacy Wi Fi Wireless Fidelity WISP Wireless Internet Service Provider WLAN Wireless Local Area Network WMM Wi Fi Multimedia WPA Wi Fi Protected Access WPS Wi Fi Protected Setup Page 180 of 180
66. date Select update file Browse Update Remote update Check for updates Y automatically Remote server URL fwupdate dlink ru Check for updates Apply settings Figure 135 The System Firmware upgrade page The current version of the router s firmware is displayed next the D Link logo in the top left corner of the page By default the automatic check for the router s firmware updates is enabled If a firmware update is available a notification will be displayed in the top right corner of the page To disable the automatic check for firmware updates in the Remote update section deselect the Check for updates automatically checkbox and click the Apply settings button To enable the automatic check for firmware updates in the Remote update section select the Check for updates automatically checkbox and click the Apply settings button By default in the Remote server URL field the D Link update server address Ewupdate dlink ru is specified You can upgrade the firmware of the router locally from the hard drive of your PC or remotely from the update server Page 168 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Local Update Attention Do not turn off the router before the firmware upgrade is completed This may cause the device breakdown To update the firmware of the router locally follow the next steps l 2i 3 4 d Download a new version of the fi
67. de To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPTP L2TP Static IP or PPTP L2TP Dynamic IP WAN Connection section page 99 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 50 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface PPTP Dynamic IP or L2TP Dynamic IP Connection Home Click n Connect Obtain DNS server addresses 37 automatically a Expert XPS lt Back Next gt Figure 39 Configuring PPTP Dynamic IP WAN connection If your ISP has provided the addresses of the DNS servers deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field As a rule the specified settings are enough to configure a non protected connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPTP L2TP Static IP or PPTP L2TP Dynamic IP WAN Connection section page 9
68. displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 40 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Static IPv6 Connection Home Click n Connect P z Connection name staticv6 IPv6 address Gateway IPv6 address Primary IPv6 DNS server Expert Spe lt Back Next gt Figure 29 Configuring Static IPv6 WAN connection In the Connection name field specify a name for the connection for easier identification Fill in the IPv6 address and Gateway IPv6 address fields As a tule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating Static IPv6 or Dynamic IPv6 WAN Connection section page 89 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability s
69. down list To set the time zone in accordance with the settings of your operating system click the Determine timezone button in the bottom right corner of the page 3 Specify the needed NTP server in the NTP servers field or leave the server specified by default 4 Click the Apply button In some cases NTP servers addresses are provided by your ISP In this case you need to select the Get NTP server addresses using DHCP checkbox Contact your ISP to clarify if this checkbox needs to be enabled If the Get NTP server addresses using DHCP checkbox is selected the NTP servers field is not available Page 171 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual After clicking the Apply button the date and time set for the router will be displayed in the System date and System time fields When the router is powered off or rebooted the system time is reset to the default value I If you have set automatic synchronization for the system time the internal clock of the m device will be configured after connecting to the Internet If you have set the system time manually you need to set the time and date again see above Page 172 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Ping On the System Ping page you can check availability of a host from the local or global network via the Ping utility The Ping utility sends echo requests to a speci
70. e detailed description of the Wizard see the IPTV Settings Wizard section page 67 The pages of the Status section display data on the current state of the router for the description of the pages see the Status section page 68 Page 27 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection The pages of the Net section are designed for configuring basic parameters of the LAN interface of the router and creating a connection to the Internet for the description of the pages see the Net section page 74 The pages of the Wi Fi section are designed for specifying all needed settings of the router s wireless network for the description of the pages see the Wi Fi section page 110 The pages of the Advanced section are designed for configuring additional parameters of the router for the description of the pages see the Advanced section page 131 The pages of the Firewall section are designed for configuring the firewall of the router for the description of the pages see the Firewall section page 148 The pages of the Control section are designed for creating restrictions on access to the Internet for the description of the page see the Control section page 157 The pages of the Yandex DNS section are designed for configuring the Yandex DNS web content filtering service for the description of the pages see the Yandex DNS section page 159 The pages of the System section provide functions
71. e and start it Select the checkbox to enable the PPPoE pass through function Select the checkbox to enable the PPTP pass through function L2TP pass through Select the checkbox to enable the L2TP pass through function After specifying the needed parameters click the Apply button 1 On the Net WAN page create a WAN connection on the Advanced Miscellaneous page select the SIP checkbox connect the phone cable between a LAN port of the router and the IP phone Specify SIP parameters on the IP phone and configure it to obtain an IP address automatically as DHCP client Page 144 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface TR 069 Client On the Advanced TR 069 Client page you can configure the router for communication with a remote Auto Configuration Server ACS The TR 069 client is used for remote monitoring and management of the device a 2 Advanced TR 069 Client TR 069 Client Interface Enable TR 069 Client Inform settings Enable Interval automatic x Y 120 Auto Configuration Server settings URL address User name Password ConnectionRequest Settings User name Password Request port Request path 8999 Apply Figure 118 The page for configuring the TR 069 client You can specify the following parameters Parameter Interface Enable TR 069 Client Description The inte
72. e button Also you can remove a server on the editing page To remove all servers from this page click the Clear all button Page 152 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual In the Remote access configuration section rules created on the Advanced Remote access to device page are displayed If after creating virtual servers you need to edit rules for remote access you can quickly get to the Advanced Remote access to device page by clicking the link to the relevant rule Page 153 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface DMZ A DMZ is a host or network segment located between internal local and external global networks In the router the DMZ implements the capability to transfer a request coming to a port of the DSL router from the external network to a specified host of the internal network On the Firewall DMZ page you can specify the IP address of the DMZ host Q Firewall DMZ Demilitarized zone settings Enabled Apply Figure 124 The Firewall DMZ page To enable the DMZ select the Enabled checkbox Enter the IP address of a host from your network in the IP address field To choose a device connected to the router s LAN at the moment select the relevant value from the drop down list the field will be filled in automatically If you want users of the router s LAN to access the host using the
73. e de a OA SYSTEM MOT se Bene ce ened ween aula s tales te AA A Webel A whe Soha eres See Saeed Se ee LOG Firmware UPgrade mia ia nene de a Ree ble es Goes eo Sede Bode a LOB Local HOP aE Cited a gt a a Tasik ah Oe A a a AA at Sse la an Waa as SERS AA BR HE eae 169 Remote Upda CO Ke See Re Se eb Give eco be Moh Gee es Sass ee Se Doe Hew De Se A ba A OS 170 System la ss ea E aes RR RN Eel ee ey eal PENG i Vere Dt Lhd kava eek s tate NA A des haste tee A A oi eee eee See ecard 73 Trate route ai ain ad Gade dw tsa d wold 2b tebe pba a Os ah ete Od e eels d 74 CUTS Si Sak th caer ache A Stance shire a RSE en ewe 75 Chapter 5 Operation GuidelineS o ooooooocooonooooo 176 Safety INStructions o aispa A A A A A A A a a 176 Wireless Installation ConsiderationS oooco oooo ooo ooo oo o 177 Connecting to Cable or DSL ModeM o oooooooooocoooooo o o o 178 Chapter 6 Abbreviations and ACronyMS o ooo oooooooooo 179 Page 4 of 180 DIR 615S Wireless N300 Router User Manual Introduction CHAPTER1 INTRODUCTION Contents and Audience This manual describes the router DIR 615S and explains how to configure and operate it This manual is intended for users familiar with basic networking concepts who create an in home local area network and system administrators who install and configure networks in offices Conventions Example Description text The body text of the
74. ect Ethernet enabled computers game consoles and other devices to your network Using the DIR 615S device you are able to quickly create a wireless network at home or in your office which lets your relatives or employees connect to your wireless network virtually anywhere within the operational range of your wireless network The router can operate as a base station for connecting wireless devices of the standards 802 11b 802 11g and 802 11n at the rate up to 300Mbps The router supports multiple functions for the wireless interface several security standards WEP WPA WPA2 MAC address filtering WPS WMM In addition the device is equipped with a button for switching the Wi Fi network off on If needed for example when you leave home you can easily switch the router s WLAN by pressing the button and devices connected to the LAN ports of the router will stay online The wireless router DIR 615S includes a built in firewall The advanced security functions minimize threats of hacker attacks prevent unwanted intrusions to your network and block access to unwanted websites for users of your LAN You can configure the settings of the wireless router DIR 615S via the user friendly web based interface the interface is available in several languages Now you can simply update the firmware the router itself finds approved firmware on D Link update server and notifies when ready to install it Page 6 of 180 DIR 615S Wireles
75. ection The General settings section Parameter Description General settings A physical or virtual interface to which the new connection will be Interface f assigned Name A name for connection for easier identification Enable Select the checkbox to enable the connection Direction The direction of this connection Page 75 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Ethernet MTU MAC 1500 6c 19 8f 56 d4 b7 via w Figure 63 The page for creating a new PPPoE connection The Ethernet section Parameter Description Ethernet MTU The maximum size of units transmitted by the interface MAC A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC address of your computer icon a to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically You can click the Restore default MAC address icon A to set the router s MAC address Page 76 of 180 DIR 615S Wireless N3
76. ection page 53 Page 41 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Dynamic IPv6 Connection Home Click n Connect Connection name dynamicv6 Obtain DNS server addresses 3 automatically 7 rt Ets lt Back Next gt Figure 30 Configuring Dynamic IPv6 WAN connection In the Connection name field specify a name for the connection for easier identification If your ISP has provided the addresses of the DNS servers deselect the Obtain DNS server addresses automatically checkbox and fill in the Static primary DNS server field As a tule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating Static IPv6 or Dynamic IPv6 WAN Connection section page 89 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 42 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual PPPoE Static IP Connection Home Click n Con
77. eded parameters create a WAN connection change the parameters of the wireless network specify the settings of the firewall etc Start a web browser see the Before You Begin section page 13 In the address bar of the web browser enter the IP address of the router by default the following IP address is specified 192 168 0 1 Press the Enter key File Edit View Bookmarks Widgets Tools Help gt DY 1B 102 168 01 y Figure 15 Connecting to the web based interface of the DIR 615S device If the error The page cannot be displayed or Unable to display the page Could not connect to remote server occurs upon connecting to the web based interface of the router make sure that you have properly connected the router to your computer After the first access to the web based interface you need to change the default administrator password Enter the new password in the Password and Confirmation fields You may set any password except admin Use digits Latin letters uppercase and or lowercase and characters available on the keyboard Then click the Apply button Please change default password Password Confirmation Apply Figure 16 The page for changing the default administrator password Remember or write down the new password for the administrator account In case of losing the new password you can access the settings of the router only after restoring the factory default settings via the ha
78. ek aa ade 21 Configuring Wi Fi Adapter in OS Windows XP oo oooooooooomoooonoonooo 22 Contiguring Wi Fi Adapter IN OS WENGOWS Wesa ari eutectic Se ee eg ie aa ls 23 Connecting to Web based Interface oooooooooococncoooooooo oo o ooo 25 Web based Interface Structures rea ae ke Be Ea Re een ee a eee oe A 26 General Intormation PAG eves A ee BOR aaa 26 Meme SE CELONS a A glee ee eal fees tat Se es as Tene enna ee Rene ong eee ete 27 Notifications and System Drop down Men cece ee ee eee eta tee e 29 Chapter 4 Configuring via Web based Interface 31 Monitoring caseta daun A A Subba Re ACT A ah geben death al we 31 ClIck n Conner AA ie A Pa Ses Sie SA eae Sees Gnd weer aah ete Mee SG 35 Creating WAN CONECTO Vit See e eed Sey a ee Baa oe aaa ee le Ride ES AAA 317 PPPOE CONNEC CELOM me AA E A SA A AAA AAA LI 37 EPV6 PBPOE Or PPPOE Duad Stack Connection d in is te ds ne 38 SCACCO LR CONNECED OM 6 tn a a a A a EIN amp Siete some 39 Dynamig IP Connections A A Tas bia lt a A se ab Seca Cine TA NA a a a a 40 Stato EBRO CONMECETON weg A is elie teed Wag a eed yal wees wee a GE eee aS 41 Dynamic IPv6 CONN CELOM write A Riko Vee LAA eee WN hE At 42 PPPOE Static IP CONNEC CET ON oa erate neee teapot e a ii nb E ho ae de 43 PPPOE Dynamite A GONNEC EA Oes bps joie ia eo br bat A TMG SR E E eS Pa SAP o Sie latas 46 PPTP Statve TP or LATE Static LP CONNECETON tic ite teet as eco Gree eee a ee 4
79. end value for the port range If you need to specify one port enter the needed value in the Public port begin field and leave the Public port end field blank Private port begin Private port end A port of the IP address specified in the Private IP field to which traffic is directed from the Public port Specify the start and the end value for the port range If you need to specify one port enter the needed value in the Private port begin field and leave the Private port end field blank The IP address of the server from the local area network To choose a device connected to the router s LAN at the moment select the ate relevant value from the drop down list the field will be filled in automatically Remote IP The IP address of the server from the external network Enable NAT Loopback Click the Apply button If the checkbox is selected users of the router s LAN can access the server which IP address is specified in the Private IP field using the router s external IP address as the server s IP address Ifa DDNS service is configured on the Advanced DDNS page the users can access the server via the router s domain name To edit the parameters of an existing server select the relevant server in the table On the opened page change the needed parameters and click the Apply button To remove a server select the checkbox located to the left of the relevant line in the table and click the Delet
80. ess N300 Router Configuring via Web based Interface User Manual Wi Fi MAC Filter MAC addresses MAC address list Known IP MAC addresses Select IP MAC address v MAC address Add Apply Figure 102 The page for adding a MAC address Click the Add button and enter an address in the field displayed Also you can enter the MAC address of a device connected to the router s LAN at the moment To do this select the relevant device from the Known IP MAC addresses drop down list the field will be filled in automatically Then click the Apply button To remove a MAC address from the list of MAC addresses select the checkbox located to the left of the relevant MAC address and click the Delete button Then click the Apply button Page 118 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual List of Wi Fi Clients On the Wi Fi List of Wi Fi clients page you can view the list of wireless clients connected to the router Wi Fi List of WiFi clients MAC Band Online Tx bytes Rx bytes RSSI 84 00 D2 2D 77 0B 2 4 GHz 102 51637 40080 71 84 C9 B2 7C D6 AF 2 4 GHz 61 287748 84420 60 Disconnect Refresh Figure 103 The list of the wireless clients If you want to disconnect a wireless device from your WLAN select the checkbox in the line containing the relevant MAC address and click the Disconnect button To view the latest data on the devices connected to the WLAN click the Re
81. ess in the local area network CO Firewall Virtual servers BupTyanbHble cepBepbi Name Interface Protocol Public port Private port PrivatelP RemotelP NAT Loopback Add Clear all Remote access configuration IP address Mask Public port Private port Figure 122 The Firewall Virtual servers page To create a new virtual server click the Add button Firewall Virtual servers Template Custom RA Name Interface lt All gt Protocol TCP E Jl Public port begin Public port end Private port begin Private port end Private IP v Remote IP Enable NAT Loopback lt Back Delete Apply Figure 123 The page for adding a virtual server Page 151 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface You can specify the following parameters Parameter Description Select a virtual server template from the drop down list or select Template Custom to specify all parameters of the new virtual server manually Name A name for the virtual server for easier identification You can specify any name Interface A WAN connection to which this virtual server will be assigned A protocol that will be used by the new virtual server Select a value Protocol from the drop down list Public port begin Public port end A port of the router from which traffic is directed to the IP address specified in the Private IP field Specify the start and the
82. ettings save the current settings to the non volatile memory reboot the router create a backup of the router s configuration restore the router s configuration from a previously saved file restore the factory default settings view the system log update the firmware of the router configure automatic notification on new firmware version configure automatic synchronization of the system time or manually configure the date and time for the router check availability of a host on the Internet through the web based interface of the router trace the route to a host allow or forbid access to the router via TELNET Page 162 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Administrator Password On the System Administrator password page you can change the password for the administrator account used to access the web based interface of the router and to access the device settings via TELNET For security reasons it is strongly recommended to change the administrator password upon initial configuration of the router System Administrator password Administrator password Login admin Password Confirmation Apply Figure 131 The page for modifying the administrator password Enter the new password in the Password and Confirmation fields and click the Apply button Page 163 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual C
83. expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection section page 79 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 38 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Static IP Connection Home Click n Connect Connection name static_Internet_2 IP Address Netmask Gateway IP address Primary DNS server rt ESPE lt Back Next gt Figure 27 Configuring Static IP WAN connection In the Connection name field specify a name for the connection for easier identification Fill in the IP Address and Netmask fields In the Gateway IP address field enter the IP address of the gateway used by this WAN connection In the Primary DNS server field enter the address of the primary DNS server As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a deta
84. f 180 DIR 615S Wireless N300 Router User Manual Installation and Connection Connecting to PC PC with Ethernet Adapter l 2 Make sure that your PC is powered off Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC Connect the power cord to the power connector port on the back panel of the router then plug the power adapter into an electrical outlet or power strip Turn on the router by pressing the ON OFF button on its back panel Turn on your PC and wait until your operating system is completely loaded Obtaining IP Address Automatically in OS Windows XP l Click the Start button and proceed to the Control Panel gt Network and Internet Connections gt Network Connections window In the Network Connections window right click the relevant Local Area Connection icon and select the Properties line in the menu displayed Network Connections Fie Edit View Favorites Tools Advanced Help Q sak g ey O ya Search Key Folders i Address Network Connections Name Type Status Network Tasks LAN or High Speed Internet Other Places EA Local Area Connection gig Disable 2 or High Speed Inter Enabled Stat e Control Panel a ve Repair My Network Places E My Documents Bridge Connections Create Shortcut Rename Details Properties Figure 3 The Network Connections window Page 14 of 180 DIR
85. f the page and select a language from the menu displayed System English Information Device information Figure 19 Changing the language of the web based interface Page 26 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection The Home Information page displays general information on the router and its software From the page you can quickly get to some pages of the web based interface To upgrade the firmware of the router left click the current firmware version the right column of the Firmware version line and follow the dialog box appeared To contact the technical support group to send an e mail left click the support e mail address the right column of the Support line After clicking the line the e mail client window for sending a new letter to the specified address opens To edit the router s local interface parameters left click the IPv4 IPv6 or MAC address of the local interface the right column of the lines LAN IPv4 LAN IPv6 or LAN MAC correspondingly After clicking the line the page for editing the LAN interface opens for the detailed description of the page see the LAN section page 106 To configure the router s WLAN basic parameters left click the SSID of the WLAN the right column of the SSID line After clicking the line the Wi Fi Basic settings page opens for the detailed description of the page see the Basic Settings section page 110 To con
86. fied host and receives echo replies O System Ping Host Count of packets 1 y IPv6 Start Figure 137 The System Ping page To check availability of a host enter the IP address or name of this host in the Host field and select a number of requests that will be sent in order to check its availability from the Count of packets drop down list If availability check should be performed with IPv6 select the relevant checkbox Click the Start button After a while the results will be displayed on the page Page 173 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Traceroute On the System Traceroute page you can determine the route of data transfer to a host via the traceroute utility Q System Traceroute Traceroute Host IPv6 Start Figure 138 The System Traceroute page To determine the route enter the name or IP address of a host in the Host field If the route should be determined using IPv6 select the relevant checkbox Click the Start button After a while the results will be displayed on the page Page 174 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Telnet On the System Telnet page you can enable or disable access to the device settings via TELNET from your LAN By default access is enabled Q System Telnet Telnet configuration On Y Apply Figure 139 The System Telnet
87. figure security settings of the WLAN left click the network authentication type the right column of the Security line After clicking the line the Wi Fi Security settings page opens for the detailed description of the page see the Security Settings section page 112 To proceed to the page for configuring the Yandex DNS web content filtering service left click the name of the Internet protection by Yandex section Also you can enable disable the service or change the default mode directly from the general information page Menu Sections To configure the router use the menu in the left part of the page The Monitoring section provides an interactive scheme which illustrates the router s settings and the LAN structure In the Home section you can run the needed Wizard To configure connection to the Internet go to the Click n Connect page for the detailed description of the Wizard see the Click n Connect section page 35 To configure the router s wireless network go to the Wireless network settings wizard page for the detailed description of the Wizard see the Wireless Network Settings Wizard section page 59 To configure access from the Internet to a web server located in your LAN go to the Virtual server settings wizard page for the detailed description of the Wizard see the Virtual Server Settings Wizard section page 65 To configure the router to use an IPTV set top box go to the IPTV settings wizard page for th
88. for managing the internal system of the router for the description of the pages see the System section page 162 Also you can find a specific page via search To do this enter the name of the page wholly or partly in the search bar in the top part of the web based interface page and then select a needed link in the search results Page 28 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection Notifications and System Drop down Menu The router s web based interface displays the notifications in the top right part of the page Device configuration was changed Figure 20 The web based interface notifications Click the icon displaying the number of notifications to view the complete list and click the relevant link Note that you should regularly save the changes of the router s settings to the non E volatile memory You can save the router s settings via the menu displayed when the mouse pointer is over the System caption in the top left part of the page Also the System menu allows you to reboot the device create and load the configuration backup restore the factory defaults update the firmware disable enable the WLAN System gt English SK Mok m Save Reboot de Get config hh 3 Restore co Reset to fa Update fir D A Wi Fi Logout Figure 21 The System menu in the top part of the page Page 29 of 180 DIR 615S Wireless N300 Router User Manual
89. fresh button Page 119 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual WPS On the Wi Fi WPS page you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN The WPS function helps to configure the protected wireless network automatically Devices connecting to the wireless network via the WPS function must support the WPS function Before using the function you need to configure one of the following authentication types Open with no encryption WPA2 PSK or WPA PSK WPA2 PSK mixed with the AES encryption method on the Wi Fi Security settings page When other security settings are specified controls of the Wi Fi WPS page are not available Wi Fi WPS Enable Disable WPS WPS Enable Y Apply Information Default PIN code 12345670 WPS Status Configured SSID DIR 615 Network Authentication WPA PSK WPA2 PSK mixed Encryption AES Encryption key 76543210 Refresh Resetto unconfigured Connection WPS Method PBC ES Connect Figure 104 The page for configuring the WPS function Page 120 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface To activate the WPS function select the WPS Enable checkbox and click the Apply button When the checkbox is selected the Information and Connection sections are available on the page Parameter Default PIN code Descr
90. h the rule will be applied Select the relevant IP version value from the drop down list A host or a subnet to which the rule is applied You can specify an IP r address IPv4 or IPv6 address For the IPv4 based network only Mask The mask of the subnet i For the IPv4 based network only Public port l An external port of the router You can specify only one port Protocol The protocol available for remote management of the router After specifying the needed parameters click the Apply button To edit a rule for remote access click the link to the relevant rule On the opened page change the needed parameters and click the Apply button To remove a rule for remote access select the checkbox located to the left of the relevant line in the table and click the Delete button Also you can remove a rule on the editing page Page 142 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Miscellaneous On the Advanced Miscellaneous page you can enable IGMP RTSP the SIP ALG the PPPoE pass through PPTP pass through and L2TP pass through functions for the router IGMP is used for managing multicast traffic transferring data to a group of destinations This protocol allows using network resources for some applications e g for streaming video more efficiently SIP is used for creating modifying and terminating communication sessions This protocol allows telephone call
91. ically or drop completely Make sure your 2 4 GHz phone base is as far away from your wireless devices as possible Note that the base transmits a signal even if the phone in not 1n use Page 177 of 180 DIR 615S Wireless N300 Router User Manual Operation Guidelines Connecting to Cable or DSL Modem If you need to connect the router to a cable or DSL modem do the following l Place the router in an open location in the supposed center of your wireless network Do not plug the power adapter into the router Turn off your PC Unplug the Ethernet cable that connects your PC to your modem from your computer and place it into the WAN port of your router Plug another Ethernet cable into one of the four LAN ports on the router Plug the other end into the Ethernet port of your PC Turn on your modem Wait until the modem is booted about 30 seconds Plug the power adapter to the router and connect to an electrical outlet or power strip Wait until the router is booted about 30 seconds Turn on your PC Verify the LEDs of the router The following LEDs should be solid or blinking green POWER INTERNET LAN corresponding to the LAN ports of the router to which devices from the router s local area network are connected and WLAN if the wireless network is on and in use If not make sure that your computer modem and router are powered on and the relevant cables are connected correctly Page 178 of 180 DIR 615S
92. ided by your ISP is connected to the WAN port of the router to the left the name of the active connection received or specified IP address and the MAC address of this connection are displayed You can change the MAC address in the editing mode or clone the MAC address of a connected device by placing the mouse pointer over the Clone MAC address icon To the right the approximate data transfer rate and the total value of the received data are displayed The Firewall element displays the number of the IP filter active rules Place the mouse pointer over the icon to view the list of the IP filter rules remove existing rules add new ones or quickly switch the filtering mode for a rule y Control Device 438 MAC Filter The Control element displays the number of blocked allowed web sites Place the mouse pointer over the icon to view the list of web sites remove existing entries or add new ones Use the Enable Disable URL filter switch gt to enable or disable the URL filter Use the drop down list to the right of the element to quickly change the operating mode block access to web sites from the list or allow access to web sites from the list The Device element displays the layout of your device Place the mouse pointer over the top right corner of this icon to display the system menu which helps you to reboot the device save the configuration restore the factory default settings update the firmwa
93. ify security settings of your wireless network If you want to view or change the password switch to the editing mode of the relevant field The Wireless Client Mode element displays operation of Wi Fi module in the client mode To the right of the graphical representation of another access point its name and MAC address are displayed Use the Disable client mode switch to disable the client mode The Wi Fi Filter element displays the number of MAC addresses specified in the MAC filter The element is unavailable when the Wi Fi module is in the client mode Place the mouse pointer over the icon to view the list of MAC addresses remove existing addresses or add new ones Use the Enable Disable Wi Fi filter switch gt to enable or disable the Wi Fi filter Use the drop down list to the right of the element to quickly change the mode of the filter allow or forbid access to your wireless network In this section you can contact the technical support group to send an e mail To do this left click the support e mail address in the bottom right corner of the page After clicking the line the e mail client window for sending a new letter to the specified address opens Page 34 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Click n Connect To configure connection to the Internet click the Click n Connect link in the Home section Home Click n Connect Connect the I
94. igns IP addresses to the router s clients When all needed settings are configured click the Apply button In the IPv6 address assignment section you can configure the built in the DHCPv6 server of the router IPv6 address assignment DHCP PD Mode Start IP End IP Leased Time min Zil Stateful hf fd01 2 1001 FEF TENE FEE Figure 93 The section for configuring the DHCPV6 server Parameter DHCP PD Description Select the checkbox to activate the Prefix Delegation function When the checkbox is selected the router requests a prefix to configure IPv6 addresses for clients of the LAN from a delegating router Page 107 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Parameter Description Select an operating mode of the DHCPv6 server from the drop down list Stateless clients themselves configure IPv6 addresses using the prefix Stateful clients receive IPv6 addresses from the range specified in the Start IP and End IP fields Disable the router s DHCPv6 server is disabled clients IPv6 addresses are assigned manually The start IPv6 address of the address pool used by the DHCPv6 server to distribute addresses to clients The end IPv6 address of the address pool used by the DHCPv6 server to distribute addresses to clients The lifetime of IPv6 addresses leased by the DHCPv6 server The Leased Time field is available fo
95. iguration You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Use the following IP address Obtain DNS server address automatically 5 Use the following DNS server addresses Validate settings upon exit Advanced Cancel Figure 10 The Internet Protocol Version 4 TCP IPv4 Properties window Click the OK button in the connection properties window Now your computer is configured to obtain an IP address automatically PC with Wi Fi Adapter 1 Connect the power cord to the power connector port on the back panel of the router then plug the power adapter into an electrical outlet or power strip 2 Turn on the router by pressing the ON OFF button on its back panel 3 Turn on your PC and wait until your operating system is completely loaded 4 Turn on your Wi Fi adapter As a rule modern notebooks with built in wireless NICs are equipped with a button or switch that turns on off the wireless adapter refer to your PC documents If your PC is equipped with a pluggable wireless NIC install the software provided with your Wi Fi adapter Page 21 of 180 DIR 615S Wireless N300 Router Installation and Connection User Manual Configuring Wi Fi Adapter in OS Windows XP 1 Click the Start button and proceed to the Control Panel gt Network and Internet Connections gt Network
96. iled description of all the connection s parameters see the Creating Static IP or Dynamic IP WAN Connection section page 85 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 39 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Dynamic IP Connection Home Click n Connect Connection name dynamic Obtain DNS server addresses fF automatically Expert XE lt Back Next gt Figure 28 Configuring Dynamic IP WAN connection In the Connection name field specify a name for the connection for easier identification If your ISP has provided the addresses of the DNS servers deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating Static IP or Dynamic IP WAN Connection section page 85 Click the Next button to continue After that the page
97. ings page Click the icon to exit the web based interface Page 30 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface CHAPTER 4 INTERFACE Monitoring CONFIGURING VIA WEB BASED The page displays an interactive scheme which illustrates the router s settings and the LAN structure Internet Y WAN 0 00bius 1 31 1 9c d6 43 3d 01 05 Firewall Control Banned m Local y u Network gt a Virtual Servers Wi Fi Filter l 2 4GHz DIR 615 A 802 11 B G N mixed gt 3 gs e setting Wireless Add client D Link Russia 8 800 700 5465 support dlink ru Figure 22 The Monitoring page Also you can modify the basic parameters of the router on the Monitoring page To access the router s advanced settings click the Editing device settings link in the bottom left corner of the page For the detailed description of all the router s functions see the relevant section of this manual Page 31 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface The interactive scheme displays the following elements Control Internet Firewall Description The Internet element displays information on the active connection Place the mouse pointer over the icon to switch to another connection remove existing connections or add new ones If the Ethernet cable prov
98. iption The PIN code of the router This parameter is used when connecting the router to a registrar to set the parameters of the WPS function The state of the WPS function e Configured all needed settings are specified these settings will be used upon establishing the wireless connection WPS Status e Unconfigured after activating the WPS function the SSID and the encryption key will be configured automatically the network authentication type will be changed to WPA2 PSK SSID The name of the router s WLAN Network Authentication The network authentication type specified for the WLAN Encryption Encryption key Refresh The encryption type specified for the WLAN The encryption key specified for the WLAN Click the button to refresh the data on the page Reset to unconfigured Click the button to reset the parameters of the WPS function WPS Method A method of the WPS function Select a value from the drop down list PIN Connecting the device via the PIN code PBC Connecting the device via the push button actual or virtual PIN Code Connect The PIN code of the WPS enabled device that needs to be connected to the wireless network of the router The field is displayed only when the PIN value is selected from the WPS Method drop down list Click the button to connect the wireless device to the router s WLAN via the WPS function Page 121 of 180 DIR 615S Wireless N300
99. it until the router is rebooted about one and a half or two minutes 4 Log into the web based interface using the login admin and the current password After the upgrade is completed the new version of the firmware will be displayed in the top left corner of the page If after updating the firmware the router doesn t work correctly please restore the factory default settings To do this place the mouse pointer over the System caption in the top left corner of the ut page and click the Reset to factory icon Wait until the router is rebooted Page 170 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface System Time On the System System time page you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet System System time System date 17 08 2015 System time 17 55 Mode NTP Timezone GMT 3 h Moscow Saint Peters NTP servers pool ntp org Get NTP server addresses using DHCP Determine timezone Apply Figure 136 The System System time page To set the system time manually select the Manual value from the Mode drop down list and set the time and date in the fields displayed Then click the Apply button To enable automatic synchronization with a time server follow the next steps 1 Select the NTP value from the Mode drop down list 2 Select your time zone from the drop
100. ld mode Protection off All new devices will be connected in the selected mode For the devices in the safe mode there will be blocked websites which try to steal your passwords e g for social networks and websites which can infect your computers For the devices in the child mode there also will be blocked websites containing adult media It is recommended to enable this mode for devices used by children Learn more about Yandex DNS on dns yandex ru Next gt Figure 42 Configuring the Yandex DNS service To enable the Yandex DNS service select the Enable Yandex DNS checkbox Then select the needed choice of the radio button to configure filtering for all devices of the router s network e Safe mode when this value is selected the service blocks access to malicious and fraudulent web sites Child mode when this value is selected the service blocks access to malicious and fraudulent web sites and blocks access to adult content e Protection off when this value is selected the service provides the DNS server with no restrictions on access to unsafe web sites If you are not going to use the service leave the Enable Yandex DNS checkbox unselected Click the Next button to continue After clicking the Next button the page for configuring wireless connection opens see the Configuring Wireless Connection section page 55 Page 54 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual
101. le If you chose the 1st port of the router then the prefix to connect to the port LAN1 Notice a computer connected to a dedicated port will not have access to the Internet LAN1 LAN2 LAN3 LAN4 Save Figure 54 The page for selecting a LAN port to connect an IPTV set top box On the opened page select the LAN port of the router to which you will connect your IPTV set top box and click the Save button If in the future you need to disconnect your IPTV set top box from the specified LAN port and connect to it a computer on the current page deselect the LAN port and click the Save button If for accessing the Internet and IPTV services your ISP uses virtual local area networks with identifiers VLAN ID to configure access to the IPTV service proceed to the Advanced VLAN page create a group of ports with the required value of the VLAN ID parameter the Bridge type and the port to which the set top box will be connected see the VLAN section page 132 for a detailed description of the elements from the page Page 67 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Status The pages of this section display data on the current state of the router e network statistics e JP addresses leased by the DHCP server e the routing table e data on devices connected to the router s network and its web based interface e active sessions e addresses of active multicast groups Network Sta
102. lected The number of the key from first to fourth which will be used for Default Key ID WEP encryption Encryption Key WEP Select the checkbox to set a hexadecimal number as a key for as HEX encryption The length of WEP encryption key Select the value 64bit to specify keys containing 5 ASCII symbols WEP key length or 10 HEX symbols Select the value 128bit to specify keys containing 13 ASCII symbols or 26 HEX symbols Keys for WEP encryption The router uses the key selected from the Default Key ID drop down list It is required to specify all the fields Encryption Key WEP 1 4 Page 129 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual When the WPA PSK WPA2 PSK or WPA PSK WPA2 PSK mixed authentication type is selected the following fields are available Parameter Description Encryption Key PSK A key for WPA encryption The key can contain digits and or Latin characters WPA Encryption An encryption method TKIP AES or TKIP AES When you have configured the parameters click the Apply button In addition when the Enable client checkbox is selected the list of available wireless networks is displayed on the page To view the latest data on the available wireless networks click the Search button To connect to a wireless network from the list select the needed network Upon that the relevant values are automatically inserted in the SSID
103. less N300 Router User Manual Installation and Connection 3 In the menu located on the left part of the window select the Change adapter settings line Control Panel Home 5 A a View your basic network information and set up connections Manage wireless networks A gt Q See full map cl Change adapter settings Gam Change advanced sharing This computer settings View your active networks Connect to a network You are currently not connected to any networks Change your networking settings T Set up a new connection or network Set up a wireless broadband dial up ad hoc or VPN connection or set up a router or access point Connect to a network Connect or reconnect to a wireless wired dial up or VPN network connection Choose homegroup and sharing options Access files and printers located on other network computers or change sharing settings See also Troubleshoot problems HomeGroup Diagnose and repair network problems or get troubleshooting information Internet Options Windows Firewall Figure 7 The Network and Sharing Center window Page 18 of 180 DIR 615S Wireless N300 Router Installation and Connection User Manual 4 In the opened window right click the relevant Local Area Connection icon and select the Properties line in the menu displayed x A i 1 9 L Control Panel Network and Internet Network Connections vts Search Network Connections P
104. list of available wireless networks select the icon of the wireless network connection and click the Connect To button or left click the network icon in the notification area located on the right side of the taskbar 16 14 13 10 2011 4 Figure 13 The notification area of the taskbar Page 23 of 180 DIR 615S Wireless N300 Router Installation and Connection User Manual 6 Inthe opened window in the list of available wireless networks select the wireless network DIR 615 and click the Connect button Not connected mi Connections are available Wi Fi A wireless router wl Open Network and Sharing Center Figure 14 The list of available networks 7 In the opened window enter the network key see WPS PIN on the barcode label on the bottom panel of the device in the Security key field and click the OK button 8 Wait for about 20 30 seconds After the connection is established the network icon will be displayed as the signal level scale If you perform initial configuration of the router via Wi Fi connection note that L immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings Page 24 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection Connecting to Web based Interface When you have configured your computer you can access the web based interface and configure ne
105. lticast O n Bandwidth 20 40MHz y Short Gl Enable iz Adaptivity Mode E Apply Figure 105 Additional settings of the WLAN The following fields are available on the page Parameter Description The time interval in seconds between keep alive checks of wireless Station Keep Alive devices from your WLAN When the value O is specified the checking is disabled The time interval in milliseconds between packets sent to Beacon Period E synchronize the wireless network The minimum size in bites of a packet for which an RTS frame is RTS Threshold transmitted The maximum size in bites of a non fragmented packet Larger Frag Threshold packets are fragmented divided The time period in seconds between sending a DTIM a message DTIM Period notifying on broadcast or multicast transmission and data transmission Page 124 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter TX Power Description The transmit power in percentage terms of the router Drop multicast Select the checkbox to disable multicasting for the router s WLAN Deselect the checkbox to enable multicasting from WAN connections for which the Enable IGMP Multicast checkbox is selected Bandwidth Short Gl The channel bandwidth for 802 11n devices 20MHz 802 11n devices operate at 20MHz channels 40MHz 802 11n devices operate at 4OMHz channels 20 40
106. ly available WPA renewal The time period in seconds at the end of which a new key for WPA encryption is generated When the value 0 is specified for this field the key is not renewed Page 115 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface When the WPA WPA2 or WPA WPA2 mixed value is selected the RADIUS settings and WPA Encryption settings sections are available Wi Fi Security settings Network Authentication WPA2 y WPA2 Pre authentication E RADIUS settings IP address 192 168 0 254 Port 1812 RADIUS encryption key dlink WPA Encryption settings WPA Encryption AES WPA renewal 3600 Apply Figure 100 The WPA2 value is selected from the Network Authentication drop down list Parameter WPA2 Pre authentication Description The checkbox activating preliminary authentication displayed only for the WPA2 and WPA WPA2 mixed authentication types IP address Port RADIUS encryption key WPA Encryption The IP address of the RADIUS server A port of the RADIUS server The password which the router uses for communication with the RADIUS server the value of this parameter is specified in the RADIUS server settings An encryption method TKIP AES or TKIP AES WPA renewal The time period in seconds at the end of which a new key for WPA encryption is generated When the value 0 is specified for this field
107. mplate from the drop down list or select Template Custom to specify all parameters of the new virtual server manually Name Enter a name for the virtual server for easier identification You can specify any name Select a WAN connection to which this virtual server will be Interface assigned A protocol that will be used by the new virtual server Select a value Protocol from the drop down list A port of the router from which traffic is directed to the IP address Public port begin specified in the Private IP field Specify the start and the end value for the port range If you need to specify one port enter the needed value in the Public port begin field and leave the Public port end field blank Public port end Page 65 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Parameter Description A port of the IP address specified in the Private IP field to which traffic is directed from the Public port Specify the start and the end value for the port range If you need to specify one port enter the needed value in the Private port begin field and leave the Private port end field blank Private port begin Private port end Enter the IP address of the server from the local area network To choose a device connected to the router s LAN at the moment select the relevant value from the drop down list the field will be filled in automa
108. n of all the connection s parameters see the Creating PPPoE Static IP or PPPoE Dynamic IP WAN Connection section page 93 Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 53 Page 47 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual PPTP Static IP or L2TP Static IP Connection Home Click n Connect IP Address 192 168 161 228 Netmask 255 255 255 0 Gateway IP address 192 168 161 1 Primary DNS server 192 168 161 140 O Expert lt Back Next gt Figure 36 Configuring PPTP Static IP WAN connection Fill in the IP Address and Netmask fields In the Gateway IP address field enter the IP address of the gateway used by this WAN connection In the Primary DNS server field enter the address of the primary DNS server As a rule the specified settings are enough to configure a non protected connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPTP L2TP Static IP or PPTP L2TP Dynamic IP WAN
109. n of the PPPoE Static IP or PPPoE Dynamic IP type click the Add button on the Net WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Connection Type PPPoE Static IP gt Interface Internet z Name pppoe_Internet_2 Enable Y Direction WAN Figure 81 The page for creating a new PPPOE Static IP connection The General settings section Parameter Description General settings A physical or virtual interface to which the new connection will be Interface assigned Name A name for connection for easier identification Enable Select the checkbox to enable the connection Direction The direction of this connection Page 93 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Ethernet MTU 1500 MAC 6c 19 856 d4 b7 v mM Figure 82 The page for creating a new PPPoE Static IP connection The Ethernet section Parameter Description Ethernet The maximum size of units transmitted by the interface A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC address of your computer icon to set the MAC address of the network interface card of the MAC computer that is being used to configure
110. nect IP Address 192 168 161 228 Netmask 255 255 255 0 Gateway IP address 192 168 161 1 Primary DNS server 192 168 161 140 Expert lt Back Next gt Figure 31 Configuring PPPoE Static IP WAN connection Fill in the IP Address and Netmask fields In the Gateway IP address field enter the IP address of the gateway used by this WAN connection In the Primary DNS server field enter the address of the primary DNS server As a rule the specified settings are enough at this step to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page for a detailed description of all the connection s parameters see the Creating PPPoE Static IP or PPPoE Dynamic IP WAN Connection section page 93 Click the Next button to continue Page 43 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual If needed enter the IP addresses of the ISP s local resources Home Click n Connect IP addresses of your ISP s local resources Here the wizard can add IP addresses of your ISP s local resources IP address 1 IP address 2 IP address 3 IP address 4 IP address 5 IP address 6 IP address 7 IP address 8 IP address 9 IP address 10 lt Back Next gt Figure 32 Configuring PPPoE Static IP WAN connection Click the Next button to continue P
111. ngs are configured click the Apply button Page 98 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Creating PPTP L2TP Static IP or PPTP L2TP Dynamic IP WAN Connection To create a connection of the PPTP Static IP L2TP Static IP PPTP Dynamic IP or L2TP Dynamic IP type click the Add button on the Net WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Connection Type Interface Name Enable Direction 4 PPTP Static IP E Internet statpptp_Internet_2 F WAN Figure 87 The page for creating a new PPTP Static IP connection The General settings section Parameter Description General settings Interface Name A physical or virtual interface to which the new connection will be assigned A name for connection for easier identification Enable Select the checkbox to enable the connection Direction The direction of this connection Page 99 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Ethernet MTU MAC 1500 6c 19 8f 56 d4 b7 via w Figure 88 The page for creating a new PPTP Static IP connection The Ethernet section Parameter Description Ethernet MTU The maximum size of units transmitted by the interface
112. nt line in the table and click the Remove button Then click the Apply button Page 109 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Wi Fi In this menu you can specify all needed settings for your wireless network Basic Settings On the Wi Fi Basic settings page you can enable your wireless local area network WLAN and configure its basic parameters Wi Fi Basic settings Enable Wireless Y Broadcast wireless network Y MBSSID Disabled z BSSID 9C D6 43 3D 01 06 7 Hide Access Point E SSID DIR 615 Country RUSSIAN FEDERATION Channel auto dd Wireless mode 802 11 B G N mixed Max Associated Clients 0 Clients Isolation E Figure 95 Basic settings of the wireless LAN Apply Parameter Description The checkbox enables Wi Fi connections If you want to disable your WLAN deselect the checkbox Enable Wireless If the checkbox is not selected devices cannot connect to the router s WLAN Upon that the router can connect to another access point as a wireless client Broadcast wireless network The unique identifier for your Wi Fi network You cannot change the value of this parameter it is determined in the device s internal settings Page 110 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Parameter Description If the checkbox is selected other users cannot see
113. oment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically You can click the Restore default MAC address icon A to set the router s MAC address Page 86 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface IP IP Address Netmask Gateway IP address Primary DNS server Secondary DNS server Figure 75 The page for creating a new Static IP connection The IP section Parameter Description IP For Static IP type IP Address Enter an IP address for this WAN connection Netmask Enter a subnet mask for this WAN connection Gateway IP address Enter an IP address of the gateway used by this WAN connection Primary DNS server Secondary DNS server Obtain DNS server addresses automatically Primary DNS server Secondary DNS server Vendor ID Hostname Enter addresses of the primary and secondary DNS servers in the relevant fields For Dynamic IP type Select the checkbox to configure automatic assignment of DNS server addresses If the checkbox is selected the Primary DNS server and Secondary DNS server fields are not displayed Enter addresses of the primary and secondary DNS servers in the relevant fields The identifier of your ISP Optional A name of the router s
114. onfiguration On the System Configuration page you can reboot the device save the changed settings to the non volatile memory restore the factory defaults backup the current configuration or restore the router s configuration from a previously created file System Configuration Save current settings Save Reboot device Reboot Reset to factory defaults Factory Saving current configuration in Backup a file Loading previously saved Browse configuration to device Exit Logout Figure 132 The System Configuration page The following buttons are available on the page Control Description Click the button to save settings to the non volatile memory Please save settings every time you change the router s parameters Otherwise the changes will be lost upon hardware reboot of the router Save Click the button to reboot the device All unsaved changes will be Reboot lost after the device s reboot Click the button to restore the factory default settings Also you can Factory restore the factory defaults via the hardware RESET button see the Back and Bottom Panels section page 11 Click the button to save the configuration all settings of the router Backup to your PC The configuration backup will be stored in the download location of your web browser Page 164 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Control Descri
115. or your DDNS provider User password The password to authorize for your DDNS provider An interval in minutes between sending data on the router s update penod external IP address to the relevant DDNS service After specifying the needed parameters click the Apply button Page 137 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface To edit parameters of the existing DDNS service select a needed field in the relevant line of the table change its value and click the Apply button To remove an existing DDNS service select the checkbox located to the left of the relevant line in the table and click the Delete button Then click the Apply button Page 138 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Routing On the Advanced Routing page you can add static routes into the system Advanced Routing Routing configuration l Destination network Destination netmask Gateway Metric Accessibility Add Apply Figure 113 The Advanced Routing page To create a new route click the Add button In the line displayed you can specify the following parameters Parameter Description Destination network A destination network to which this route is assigned Destination netmask The destination network mask Gateway An IP address through which the destination network can be accessed A metric for the route The lower
116. ork To use the WPS function with the device turned on push the button WPS hold it for 2 seconds and release The WPS LED should start blinking To disable the router s wireless network with the device turned on press the button hold for 7 seconds and release The WLAN LED should turn off LAN 1 4 4 Ethernet ports to connect computers or network devices A port to connect to a cable or DSL modem or to a private Ethernet line WAN it is recommended to use the cable included in the delivery package The RESET button located on the bottom panel of the router is designed to restore the factory default settings To restore the factory defaults push the button with the device turned on hold it for 10 seconds and then release the button The device is also equipped with two external Wi Fi antennas Page 11 of 180 DIR 615S Wireless N300 Router Overview User Manual Delivery Package The following should be included e Router DIR 615S e Power adapter DC 12V 0 5A Ethernet cable CAT 5 e Quick Installation Guide brochure The User Manual and Quick Installation Guide documents are available on D Link website see www dlink ru Using a power supply with a different voltage rating than the one included will cause m damage and void the warranty for this product Page 12 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection CHAPTER 3 INSTALLA
117. outer Configuring via Web based Interface User Manual Home Wireless network settings wizard Enter security key to establish connection Network key lt Back Next gt Figure 51 The page for entering the password for connection to the wireless network If you need a password to connect to the selected network enter the password in the Network key field and click the Next button Page 63 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual On the next page you can specify an individual name SSID and security settings for the router or O disable the router s wireless network broadcast Home Wireless network settings wizard Broadcasting their network Enable Y SSID Specify the security mode Network Authentication Protected yl Network key lt Back Next gt Figure 52 The page for changing the settings of the wireless local area network If you want to use the router s wireless network to connect devices leave the Enable checkbox selected Then if needed specify another name for the network in the SSID field use digits and Latin characters It is strongly recommended to configure the secure wireless network of DIR 615S To do this select the Protected value from the Network Authentication drop down list and enter a key a password that will be used to access your wireless network in the Network key field Use digits and Latin characters After ap
118. p down list or leave the Automatically value IPv6 gateway SLAAC Static IPv6 gateway address Figure 70 The page for creating a new Pv6 PPPoE connection The IPv6 gateway section Parameter SLAAC IPv6 gateway Select the checkbox to automatically assign the IPv6 gateway address with help of SLAAC Stateless Address Autoconfiguration Description Static IPv6 gateway address The static address of the editing if the SLAAC checkbox is not selected Page 82 of 180 IPv6 gateway The field is available for DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface IPv6 DNS addresses Obtain DNS server addresses automatically Static primary DNS server Static secondary DNS server PPP debug T Figure 71 The page for creating a new Pv6 PPPoE connection The IPv6 DNS addresses section Parameter Description IPv6 DNS addresses Obtain DNS server addresses automatically Static primary DNS server Static secondary DNS server Select the checkbox to configure automatic assignment of IPv6 DNS server addresses If the checkbox is selected the Static primary DNS server and Static secondary DNS server fields are not available for editing Enter addresses of the primary and secondary IPv6 DNS servers in the relevant fields PPP debug Select the checkbox if you want to log all data on PPP connection debugging Page 83 of 180 DI
119. p down list and enter a key a password that will be used to access your wireless network in the Network key field Use digits and Latin characters After applying this setting the WPA PSK WPA2 PSK mixed authentication type is specified for the router s WLAN When the Open value is selected the Network key field is unavailable After applying this setting the Open authentication type with no encryption is specified for the router s WLAN Home Wireless network settings wizard Specify the security mode Network Authentication Protected Network key lt Back Next gt Figure 49 Page for selecting a security mode for the wireless network Click the Next button to continue On the next page the specified settings are displayed Make sure that they are correct and then click the Apply button After clicking the button the Home Information page opens Page 61 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Client Mode On the opened page click the Search button Home Wireless network settings wizard Select the wireless network SSID BSSID Wireless mode Channel 2 00 13 46 76 F1 B7 802 11 b g 4 Search Network Authentication Signal level WPA2 PSK TKIP AES 38 lt Back Next gt Figure 50 The page for selecting a network to connect Select the network to which you want to connect and click the Next button Page 62 of 180 DIR 615S Wireless N300 R
120. pecified by your ISP Optional Page 87 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Miscellaneous Isolate connection Enable RIP Enable IGMP Multicast NAT firewall Ping IAE E Figure 76 The page for creating a new Static IP connection The Miscellaneous section Parameter Description Miscellaneous Isolate connection Enable RIP When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Select the checkbox to allow using RIP for this connection Enable IGMP Multicast Select the checkbox to allow multicast traffic from the external network e g video streaming to be received NAT Firewall Ping Select the checkbox 1f you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settings are configured click the Apply button Page 88 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Creating Static IPv6 or Dynamic IPv6 WAN Connection To create a connection of the Static IPv6 or Dynamic IP
121. perties window 5 Click the OK button in the connection properties window Now your computer is configured to obtain an IP address automatically Page 16 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection Obtaining IP Address Automatically in OS Windows 7 E 2 Click the Start button and proceed to the Control Panel window Select the Network and Sharing Center section If the Control Panel has the category view the Category value is selected from the View by drop down list in the top right corner of the window choose the View network status and tasks line under the Network and Internet section J amp j D E X e E COJE gt Control Panel All Control Panel Items gt v 49 Search Control Panel AP Adjust your computer s settings View by Largeicons Y n g a Indexing Options Internet Options lt p Keyboard Location and Other c ER Network and Sharing Sensors SN Center loja Performance Information and Tools Notification Area Icons Parental Controls OB ESO Personalization Phone and Modem Y Power Options A Programs and Features Recovery 9 Region and Language er ames Sound Speech Recognition Sync Center Ba System ag Taskbar and Start Menu l Troubleshooting BE User Accounts E Windows CardSpace Windows Defender Pg Windows Firewall By Windows Update E Figure 6 The Control Panel window Page 17 of 180 DIR 615S Wire
122. plying this setting the WPA PSK WPA2 PSK mixed authentication type is specified for the router s WLAN Click the Next button On the next page the parameters of the network to which you want to connect the entered password and the settings of the wireless network of the router are displayed Make sure that the specified settings are correct and then click the Apply button After that the wireless channel of DIR 615S will switch to the channel of the wireless access point to which you have connected After configuring the device as a client you need to create a WAN connection with relevant parameters for the WiFiClient interface After clicking the Apply button the Home Information page opens Page 64 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Virtual Server Settings Wizard To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the LAN click the Virtual server settings wizard link in the Home section JO Home Virtual server settings wizard Template Custom x Name Interface lt All gt Protocol TCP gt Public port begin Public port end Private port begin Private port end Private IP v Remote IP Enable NAT Loopback Apply Figure 53 The page for adding a virtual server On the opened page you can specify the following parameters Parameter Description Select a virtual server te
123. ption Click the button and follow the dialog box appeared to select a Browse previously saved configuration file all settings of the router located on your PC and upload it Click the button to exit the web based interface Actions of the Save Reboot Factory Backup and Logout buttons also can be performed via the top page menu displayed when the mouse pointer is over the System caption Page 165 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface System Log On the System System log Configuration page you can set the system log options and configure sending the system log to a remote host System System log Configuration Logging Logging type Logging level Server Port Y Local and remote v Informational messages v 514 Apply Figure 133 The System System log Configuration page To enable logging of the system events select the Logging checkbox Then specify the needed parameters Control Logging type Description Select a type of logging from the drop down list e Local the system log is stored in the router s memory and displayed on the System System log Log page When this value is selected the Server and Port fields are not displayed e Remote the system log is sent to the remote host specified in the Server field e Local and remote the system log is stored in the router s memory and displayed on the Sys
124. r editing if the Gateway by SLAAC checkbox is not selected Select the checkbox to configure automatic assignment of IPv6 DNS server addresses If the checkbox is selected the Static primary DNS server and Static secondary DNS server fields are not available for editing Enter addresses of the primary and secondary IPv6 DNS servers in the relevant fields Page 91 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Miscellaneous Isolate connection Enable RIP Firewall Ping a a 0g Figure 80 The page for creating a new Static IPv6 connection The Miscellaneous section Parameter Description Miscellaneous When the checkbox is selected the router uses an alternate routing Isolate connection table for this connection Select the checkbox only when your ISP requires this Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to enable protection against ARP and DDoS Firewall attacks Select the checkbox to allow the router to answer ping requests Ping from the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settings are configured click the Apply button Page 92 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Creating PPPoE Static IP or PPPoE Dynamic IP WAN Connection To create a connectio
125. r editing if the DHCP PD checkbox is not selected When all needed settings are configured click the Apply button In the Static DHCP section you can specify MAC address and IP address pairs set a fixed IPv4 address in the local area network for a device with a certain MAC address The router assigns IP addresses in accordance with the specified pairs only when the DHCP server is enabled in the DHCP server section in the Mode drop down list the Enable value is selected Static DHCP Known IP MAC addresses lt Select IPIMAC address gt Y IP MAC Host Add Apply Figure 94 The section for creating MAC IP pairs To create a MAC IP pair click the Add button In the IP field enter an IPv4 address which will be assigned to the device from the LAN then in the MAC field enter the MAC address of this device In the Host field specify a network name of the device for easier identification optional Also you can create a MAC IP pair for a device connected to the router s LAN at the moment To do this select the relevant value from the Known IP MAC addresses drop down list the IP and MAC fields will be filled in automatically When all needed MAC IP pairs are specified click the Apply button Page 108 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Existing MAC IP pairs are displayed in the table of the Static DHCP section To remove a pair select the checkbox in the releva
126. rating range of your wireless network Keep in mind however that the number thickness and location of walls ceilings or other objects that the wireless signals must pass through may limit the range Typical ranges vary depending on the types of materials and background RF noise in your home or office To maximize your wireless range follow the guidelines below E Keep the number of walls and ceilings between the DIR 615S device and other network devices to a minimum each wall or ceiling can reduce your wireless network range by 3 90 feet 1 30 meters Be aware of the direct line between network devices Place your devices so that the signal travels straight through a wall or ceiling instead of at an angle for better reception Building materials make a difference A solid metal door or aluminum studs may have a negative effect on your wireless range Try to position your router access points and computers so that the signal passes through drywalls or open doorways Materials and objects such as glass steel metal walls with insulation water fish tanks mirrors file cabinets brick and concrete will degrade your wireless signal Keep your router away at least 3 6 feet or 1 2 meters from electrical devices or appliances that generate RF noise If you are using 2 4 GHz cordless phones or X 10 equipment wireless devices such as ceiling fans lights and home security systems your wireless connection may degrade dramat
127. rdware RESET button This procedure wipes out all settings that you have configured for your router When the web based interface is accessed the next time and after the login page opens Enter the username admin in the Login field and the password you specified in the Password field then click the Enter button D LINK DEVICE Login Password Clear Enter Figure 17 The login page Page 25 of 180 DIR 615S Wireless N300 Router User Manual Installation and Connection Web based Interface Structure General Information Page After successful registration the Home Information page opens Home Information Device information Vendor D Link Russia Model DIR 615 Firmware version 2 5 5 Build time Fri May 15 17 28 44 MSK 2015 Summary Root filesy stem image for DIR 615 Web revision cf258900e8bdbaa971e388385884df572a92c343f Support 8 800 700 5465 support diink ru Network information LAN IPv4 LAN IPv6 LAN MAC s SSID DIR 615 Security 2 192 168 161 222 WAN type Dynamic IP WAN connection status IPv6 ml wan type Dynamic IPv6 Unknown error WAN connection status IPv4 Internet protection by Yandex Enabled No E 0 dev 1 device 0 devices Figure 18 The general information page The web based interface of the router is multilingual If you need to select another language for the web based interface place the mouse pointer over the English caption in the top part o
128. re exit the web based interface The MAC Filter element displays the total number of clients to which the filtering rules are applied and the number of blocked clients Place the mouse pointer over the icon to view the list of filtered clients remove existing clients add new ones or quickly switch the filtering mode for a client Page 32 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Control 7r Virtual Servers Description The Virtual Servers element is designed for redirecting incoming traffic to a specific IP address in the LAN It displays the total number of rules for redirecting traffic and the number of rules active in this specific LAN Place the mouse pointer over the icon to view the list of all rules for redirecting traffic remove existing rules or add new ones DHCP USERIYou Dynamic Clients The DHCP element is a scale where the range of the DHCP server addresses is placed Dynamic clients receive IP addresses from this range Use the Enable Disable DHCP Server switch to enable or disable DHCP server If you want to change the range enter a value from the keyboard in the editing mode or move the sliders In the editing mode you can specify the subnet mask The Dynamic Clients area displays all connected dynamic clients An icon of a client displays the name of a device its MAC address and received IP address The list of actions available for e
129. re the following router s settings 1 Specify corresponding security settings for the wireless network of the router 2 Select the WPS Enable checkbox 3 Click the Apply button I 4 Save the settings and close the web based interface click the icon S Save in the menu displayed when the mouse pointer is over the System caption in the top left part of gt EN the page then click the icon Logout Page 122 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the router 1 Select the PBC method in the software of the wireless device that you want to connect to the router s WLAN 2 Click the relevant button in the software or press the WPS button on the cover of the wireless device that you want to connect to the WLAN 3 Press the WPS button of the router hold it for 2 seconds and release The WPS LED will start blinking Page 123 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Additional Settings On the Wi Fi Additional settings page you can define additional parameters for the WLAN of the router I Changing parameters presented on this page may negatively affect your WLAN Wi Fi Additional settings Station Keep Alive 0 Beacon Period 100 RTS Threshold 2347 Frag Threshold 2346 DTIM Period 1 TX Power 100 z Drop mu
130. rface which the router uses for communication with the ACS Leave the automatic value to let the device select the interface basing on the routing table or select another value if required by your ISP Select the checkbox to enable the TR 069 client Page 145 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter Description Inform settings Enable Select the checkbox so the router may send reports data on the device and network statistics to the ACS Interval Specify the time period in seconds between sending reports Auto Configuration Server settings URL address The URL address of the ACS provided by the ISP The username to connect to the ACS The username can contain User name digits Latin letters uppercase and or lowercase and characters available on the keyboard The password to connect to the ACS The password can contain Password digits Latin letters uppercase and or lowercase and characters available on the keyboard ConnectionRequest Settings The username used by the ACS to transfer a connection request to User name the router The username can contain digits Latin letters uppercase and or lowercase and characters available on the keyboard The password used by the ACS The password can contain digits Password Latin letters uppercase and or lowercase and characters available Request port Request path on the keyboard The port u
131. rmware from www dlink ru Click the Browse button on the System Firmware upgrade page to locate the new firmware file Click the Update button to upgrade the firmware of the router Wait until the router 1s rebooted about one and a half or two minutes Log into the web based interface using the login admin and the current password After the upgrade is completed the new version of the firmware will be displayed in the top left corner of the page If after updating the firmware the router doesn t work correctly please restore the factory default settings To do this place the mouse pointer over the System caption in the top left corner of the o page and click the Reset to factory icon Wait until the router is rebooted Page 169 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Remote Update Attention Do not turn off the router before the firmware upgrade is completed This may a cause the device breakdown To update the firmware of the router remotely follow the next steps 1 On the System Firmware upgrade page in the Remote update section click the Check for updates button to check if a newer firmware version exists 2 Click the OK button in the window displayed to upgrade the firmware of the router Also you can upgrade the firmware of the router by clicking the Remote update button the button is displayed if a newer version of the firmware is available 3 Wa
132. rnet The confirmation of the entered password to avoid mistypes The name of the PPPoE authentication server Authentication algorithm MTU Keep Alive Dial on demand Select a required authentication method from the drop down list or leave the AUTO value The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated PPP IP extension This option is used by some ISPs Contact your ISP to clarify if this checkbox needs to be enabled Page 81 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter Description For the PPPoE Dual Stack type only Static IP Address Fill in the field if you want to use a static IP address to access the Internet IPv6 Get IPv6 Automatically izi Figure 69 The page for creating a new Pv6 PPPoE connection The IPv6 section Parameter IPv6 Description Get IPv6 Select a method for IPv6 address assignment from the dro
133. router s DHCP server Enable the router assigns IP addresses to clients automatically in accordance with the specified parameters When this value is selected the DNS Relay Start IP End IP and the Lease time fields are displayed on the page Mode Disable the router s DHCP server is disabled clients IP addresses are assigned manually Relay an external DHCP server is used to assign IP addresses to clients When this value is selected the External DHCP server IP field is displayed on the page Page 106 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter DNS Relay Description Select the checkbox so that the devices connected to the router obtain the address of the router as the DNS server address Deselect the checkbox so that the devices connected to the router obtain the address transmitted by the ISP as the DNS server address The start IP address of the address pool used by the DHCP server to distribute IP addresses to clients The end IP address of the address pool used by the DHCP server to distribute IP addresses to clients Lease time External DHCP server IP The lifetime of IP addresses leased by the DHCP server At the end of this period the leased IP address is revoked and can be distributed to another device unless the previous device has confirmed the need to keep the address The IP address of the external DHCP server which ass
134. router s external IP address select the Enable NAT Loopback checkbox If a DDNS service is configured on the Advanced DDNS page also the users can access the host via the router s domain name Click the Apply button Note that when the DMZ is enabled all traffic coming to a port of the WAN interface of the router is directed to the same port of the specified IP address Also note that virtual servers have higher priority than the DMZ host In other words if there has been created a virtual server that directs traffic from external port 80 to a port of the device from the router s local network then entering http router WAN_IP in the address bar users of the external network are directed to the specified port and IP address configured for the virtual server but not to port 80 of the device with the IP address specified on the Firewall DMZ page To disable the DMZ deselect the Enabled checkbox and click the Apply button Page 154 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual MAC Filter On the Firewall MAC filter page you can configure MAC address based filtering for computers of the router s LAN Q Firewall MAC filter Other mac address Allow Ne MAC address Action Status Add Figure 125 The Firewall MAC filter page Select the needed action from the drop down list to configure filtering for all devices of the router s network Allow Allows access to the rou
135. rule click the Add button Page 148 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Firewall IP filters General Protocol TCP UDP Action Allow gt Activate Y IP version IPv4 gt IP Addresses Source IP address Destination IP address Ports Source port Destination port lt Back Apply Figure 121 The page for adding a rule for IP filtering You can specify the following parameters Parameter Description General A protocol for network packet transmission Select a value from the Protocol drop down list Select an action for the rule Allow Allows packet transmission in accordance with the criteria Action specified by the rule Deny Denies packet transmission in accordance with the criteria specified by the rule Activate If the checkbox is selected the rule is enabled Deselect the checkbox to disable the rule An IP version to which the rule will be applied Select the relevant IP version value from the drop down list Page 149 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Parameter Description IP Addresses Source IP address The source host subnet IP address To choose a device connected to the router s LAN at the moment select the relevant IP address from the drop down list the field will be filled in automatically If you want to specify a range of IP
136. rvers in the relevant fields The identifier of your ISP Optional Hostname A name of the router specified by your ISP Optional Isolate connection Enable RIP Enable IGMP Multicast When the checkbox is selected the router uses an alternate routing table for this connection Select the checkbox only when your ISP requires this Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external network e g video streaming to be received NAT Firewall Ping Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Page 102 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual VPN Connect automatically Username Without authorization Password Password confirmation VPN server address Encryption No encrypt le Authentication algorithm AUTO ly MTU 1456 Keep Alive Y LCP interval sec 30 LCP fails 3 Extra options Dial on demand Static IP Address PPP debug IP received Isolate connection Enable RIP NAT Firewall
137. s N300 Router User Manual Overview Specifications Hardware Interfaces 10 100BASE TX WAN port 4 10 100BASE TX LAN ports LEDs i POWER WLAN WPS INTERNET 4 LAN LEDs Buttons ON OFF button to power on power off RESET button to restore factory default settings WPS button to set up secure wireless connection and enable disable wireless network Antenna Two non detachable omnidirectional antennas 5dBi gain MIMO 2x2 Power connector Power input connector DC Software WAN connection types PPPoE IPv6 PPPoE PPPoE Dual Stack Static IP Dynamic IP Static IPv6 Dynamic IPv6 PPPoE Static IP Dynamic IP PPTP L2TP Static IP PPTP L2TP Dynamic IP Network functions DHCP server relay DHCPV6 server Stateful Stateless IPv6 prefix delegation DNS relay Support of DNSv6 AAAA records Dynamic DNS Static IP routing Static IPv6 routing IGMP Proxy RIP Support of UPnP IGD Support of VLAN Flow control WAN ping respond Support of SIP ALG Support of RTSP The device features are subject to change without notice For the latest versions of the firmware and relevant documentation visit www dlink ru Page 7 of 180 DIR 615S Wireless N300 Router User Manual Overview Software Firewall functions Network Address Translation NAT Stateful Packet Inspection SPI IP filter IPV6 filter MAC filter URL filter DMZ
138. s via the Internet RTSP is used for real time streaming multimedia data delivery This protocol allows some applications to receive streaming audio video from the Internet The PPPoE pass through function allows PPPoE clients of computers from your LAN to connect to the Internet through PPPoE connections of the router The PPTP pass through and L2TP pass through functions allow VPN PPTP and L2TP traffic to pass through the router so that clients from your LAN can establish relevant connections with remote networks Advanced Miscellaneous IGMP IGMPv2 y PPPoE pass through PPTP pass through 2TP pass through Apply Figure 117 The Advanced Miscellaneous page Page 143 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface The following elements are available on the page Parameter RTSP PPPoE pass through PPTP pass through Description Select a version of IGMP from the drop down list to enable IGMP Such a setting allows using the IGMP Proxy function for all WAN connections for which the Enable IGMP Multicast checkbox is selected To disable IGMP select the Off value from the drop down list Select the checkbox to enable SIP Such a setting allows using the SIP ALG function This function allows VoIP traffic to pass through the NAT enabled router Select the checkbox to enable RTSP Such a setting allows managing media stream fast forward streaming audio video paus
139. sed by the ACS By default the port 8999 is specified The path used by the ACS When you have configured the parameters click the Apply button Page 146 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Flow Control On the Advanced Flow Control page you can enable and disable data flow control for the WAN port of the router This function is used for equal load balancing in ISPs networks Contact your ISP to clarify if this function needs to be enabled Advanced Flow Control Flow Control Enabled Y Apply Figure 119 The Advanced Flow Control page To enable the flow control function select the Enabled checkbox and click the Apply button To disable the flow control function deselect the Enabled checkbox and click the Apply button Page 147 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Firewall In this menu you can configure the firewall of the router e add rules for IP filtering e create virtual servers e define a DMZ e configure the MAC filter IP Filters On the Firewall IP filters page you can create new rules for filtering IP packets and edit or remove existing rules Firewall IP filters IPv4 address Port No Protocol Source Destination Action Status IPv6 address Port No Protocol Source Destination Action Status Add Figure 120 The Firewall IP filters page To create a new
140. t WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Connection Type Es Static IP Interface E Internet Name static_Internet_2 Enable F Direction WAN Figure 73 The page for creating a new Static IP connection The General settings section Parameter Description General settings A physical or virtual interface to which the new connection will be Interface assigned Name A name for connection for easier identification Enable Select the checkbox to enable the connection The direction of this connection Direction Page 85 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Ethernet MTU MAC 1500 6c 19 8f 56 d4 b7 via w Figure 74 The page for creating a new Static IP connection The Ethernet section Parameter Description Ethernet MTU The maximum size of units transmitted by the interface MAC A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC address of your computer icon a to set the MAC address of the network interface card of the computer that is being used to configure the router at the m
141. tem System log Log page and sent to the remote host specified in the Server field Logging level Server Select a type of messages and alerts notifications to be logged The IP or URL address of the host from the local or global network to which the system log will be sent Page 166 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Control Description A port of the host specified in the Server field By default the value Par 514 is specified After specifying the needed parameters click the Apply button To disable logging of the system events deselect the Logging checkbox and click the Apply button On the System System log Log page the events specified in the Logging level list are displayed System System log Log Refresh Export Figure 134 The System System log Log page To view the latest system events click the Refresh button To save the system log to your PC click the Export button and follow the dialog box appeared Page 167 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Firmware Upgrade On the System Firmware upgrade page you can upgrade the firmware of the router and configure the automatic check for updates of the router s firmware Upgrade the firmware only when the router is connected to your PC via a wired a connection System Firmware upgrade Local up
142. ter s network and to the Internet for devices the value is specified by default e Deny Blocks access to the router s network for devices If you need to specify a filtering mode for each device separately create relevant rules To do this click the Add button Page 155 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual JO Firewall MAC filter MAC address 4 Action Allow Pa Activate v lt Back Apply Figure 126 The page for adding a rule for the MAC filter You can specify the following parameters Parameter Description The MAC address of a device from the router s LAN You can enter the MAC address of a device connected to the router s LAN at the moment To do this select the relevant device from the drop down list the field will be filled in automatically MAC address Select an action for the rule Deny Blocks access to the router s network for the device with the specified MAC address Action Allow Allows access to the router s network and to the Internet for the device with the specified MAC address when the rules on the Firewall IP filters page block access for this device If the checkbox is selected the rule is enabled Deselect the Activate checkbox to disable the rule After specifying the needed parameters click the Apply button To edit a rule for filtering click the link to the relevant rule On
143. the opened page change the needed parameters and click the Apply button To remove a rule select the checkbox located to the left of the relevant line in the table and click the Delete button Also you can remove a rule on the editing page Page 156 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual Control This menu is designed to create restrictions on access to certain web sites URL Filter On the pages of the Control URL filter section you can specify restrictions on access to certain web sites Control URL filter Configuration URL filter configuration Enable Disable URL filter Y URL filter type Block listed URLs y Block listed URLs Block all URLs except listed Apply Figure 127 The Control URL filter Configuration page To enable the URL filter select the Enable Disable URL filter checkbox on the Control URL filter Configuration page then select a needed mode from the URL filter type drop down list Block listed URLs when this value is selected the router blocks access to all addresses specified on the Control URL filter Configuration page Block all URLs except listed when this value is selected the router allows access to addresses specified on the Control URL filter Configuration page and blocks access to all other web sites Click the Apply button To specify URL addresses to which the selected filtering will be applied go
144. the router select the Enabled checkbox and click the Apply button When the protocol is enabled the router s parameters configured automatically are displayed on the page Parameter Description Protocol A protocol for network packet transmission IP The IP address of a client from the local area network A port of a client s IP address to which traffic is directed from a Private port public port of the router A public port of the router from which traffic is directed to a client s Public port IP address Comments Information transmitted by a client s network application Page 135 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Redirect On the Advanced Redirect page you can enable notifications on the reason of the Internet connection failure Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet CO Advanced Redirect Enable E Reasons for redirect Physical connection error Y The device is not configured Y No connection Y Firmware update 7 Apply Figure 111 The Advanced Redirect page To configure notifications select the Enable checkbox Then select needed checkboxes in the Reasons for redirect section Parameter Description Reasons for redirect Notifications in case of physical connection problems the ISP s cable is not connected an
145. the value the higher is the route Metric p priority Optional After specifying the needed parameters click the Apply button To edit an existing route select a needed field in the relevant line of the table change its value and click the Apply button To remove an existing route select the checkbox located to the left of the relevant line in the table and click the Delete button Then click the Apply button Page 139 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual IPv6 Routing On the Advanced IPv6 routing page you can add static routes into the system Advanced IPv6 routing Routing configuration E Destination network Gateway Metric Accessibility Add Apply Figure 114 The Advanced IPv6 routing page To create a new route click the Add button In the line displayed you can specify the following parameters Parameter Description A destination network to which this route is assigned You can specify Destination network an IPv6 address 2001 db8 1234 1 or an IPv6 address with a prefix 2001 db8 1234 64 An IPv6 address through which the destination network can be eater accessed Metric A metric for the route The lower the value the higher is the route priority Optional After specifying the needed parameters click the Apply button To edit an existing route select a needed field in the relevant line of the table change its
146. this go to the Yandex DNS Internet protection settings Devices page O Yandex DNS Internet protection settings Devices Default mode Safe Ya n dex Clients without rules MAC addresses IP address Host 6c 62 6d 7d 26 a1 192 168 0 2 Rules Known IP MAC addresses Select IP MAC address v MAC addresses IP address Set the name Mode Add Apply Figure 130 The Yandex DNS Internet protection settings Devices page On the opened page in the Clients without rules section the devices which filtering mode is specified on the Yandex DNS Internet protection settings Settings page are displayed The name of the mode is displayed in the Default mode section Page 160 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual To create a new filtering rule for a device click the Add button in the Rules section In the line displayed you can specify the following parameters Parameter Description The MAC address of a device from the router s LAN You can enter the MAC address of a device connected to the router s LAN at the MAC addresses moment To do this select the relevant device from the Known IP MAC addresses drop down list the field will be filled in automatically The IP address of a device from the router s LAN You can enter the IP address of a device connected to the router s LAN at the moment IP address To do this select the relevant device from the Kno
147. tically Private IP Remote IP Enter the IP address of the server from the external network If the checkbox is selected users of the router s LAN can access the server which IP address is specified in the Private IP field using Enable NAT Loopback the router s external IP address as the server s IP address If a DDNS service is configured on the Advanced DDNS page the users can access the server via the router s domain name When needed settings are configured click the Apply button After clicking the Apply button a dialog box appears If you are going to create a new virtual server click the OK button After clicking the button the Firewall Virtual servers page opens see the Virtual Servers section page 151 for a detailed description of the elements from the page If you are not going to create a new virtual server click the Cancel button After clicking the button the Home Information page opens Page 66 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual IPTV Settings Wizard To configure the router to use an IPTV set top box click the IPTV settings wizard link in the Home section Home IPTV settings wizard If your ISP provides a service to IPTV you can connect a set top box directly to the router without using additional equipment To do this check the checkbox corresponding to any LAN port and then connect to the port your TV top box For examp
148. tistics On the Status Network statistics page you can view statistics for all connections existing in the system WAN connections LAN WLAN For each connection the following data are displayed name and state when the connection is on its name is highlighted in green when the connection is off its name is highlighted in red IP address and subnet mask gateway if the connection is established MAC address MTU value and volume of data received and transmitted with increase of the volume the units of measurement are changed automatically byte Kbyte Mbyte Gbyte Status Network statistics IP Name MAC Rx Tx oe Gateway one 2 57 17 MByte 9C D6 43 3 5 x WIFI 9C D6 43 3D 01 06 379 MENTE gt WAN_v6 9C D6 43 3D 01 05 f gt 192 168 0 1 24 ee LAN 9C D6 43 3D 01 06 Sine gt 192 168 0 1 A 192 168 161 223 24 2 A7 GRvte WAN 9C D6 43 3D 01 05 a67 GEIE 139 5 gt 192 168 161 1 Moye Figure 55 The Status Network statistics page Page 68 of 180 DIR 615S Wireless N300 Router Configuring via Web based Interface User Manual DHCP The Status DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device as well as the IP address expiration periods the lease time Status DHCP Hostname IP address MAC address Expires USER 192 168 0 2 6c 62 6d 7d 26 a1 23h 48m 12s USER fd01 cb43 73d 1
149. ture Operating from 0 to 40 C Storage from 20 to 65 C Humidity Operating from 10 to 90 non condensing Storage from 5 to 95 non condensing Page 9 of 180 DIR 615S Wireless N300 Router User Manual Overview Product Appearance Top Panel Figure 1 Top panel view LED Mode Description Solid green The router is powered on POWER No light The router is powered off Solid green The router s WLAN is on _ The WLAN interface is active upstream or downstream WLAN Blinking green traffic No light The router s WLAN is off y Attempting to add a wireless device via the WPS Blinking green WPS function No light The WPS function is not in use Solid green The Internet connection is on The WAN interface is active upstream or downstream INTERNET Blinking green up traffic No light The cable is not connected A device computer is connected to the relevant port Solid green 7 the connection is on LAN 1 4 us The LAN port is active upstream or downstream Blinking green traffic No light The cable is not connected to the relevant port Page 10 of 180 DIR 615S Wireless N300 Router User Manual Overview Back and Bottom Panels Figure 2 Back panel view NET Description ON OFF A button to turn the router on off 12VDC IN Power connector A button to set up a secure wireless connection the WPS function and enable disable the wireless netw
150. v6 type click the Add button on the Net WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Connection Type Static IPv6 y Interface Internet z Name staticv6_Internet_2 Enable V Direction WAN Figure 77 The page for creating a new Static IPv6 connection The General settings section Parameter Description General settings A physical or virtual interface to which the new connection will be Interface assigned Name A name for connection for easier identification Enable Select the checkbox to enable the connection Direction The direction of this connection Page 89 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface Ethernet MTU MAC 1500 6c 19 8f 56 d4 b7 via w Figure 78 The page for creating a new Static IPv6 connection The Ethernet section Parameter Description Ethernet MTU The maximum size of units transmitted by the interface MAC A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC address of your computer icon a to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as
151. wn IP MAC addresses drop down list the field will be filled in automatically Enter a name for the rule for easier identification You can specify Set the name any name Select an operating mode of the Yandex DNS service for this rule Child when this value is selected the service blocks access to malicious and fraudulent web sites and blocks access to adult content Mode Safe when this value is selected the service blocks access to malicious and fraudulent web sites Protection off when this value is selected the service provides the DNS server with no restrictions on access to unsafe web sites After specifying the needed parameters click the Apply button To edit a rule for filtering select a needed field in the relevant line of the table change its value and click the Apply button To remove a rule for filtering select the checkbox located to the left of the relevant rule and click the Apply button To disable the Yandex DNS service deselect the Enabled checkbox on the Yandex DNS Internet protection settings Settings page 2 When a new rule for filtering is created a MAC address and IP address pair is displayed on the Net LAN page The created pair will be deleted with the relevant rule Page 161 of 180 DIR 615S Wireless N300 Router User Manual Configuring via Web based Interface System In this menu you can do the following change the password used to access the router s s

DIR-615S_A1_User Manual_v.2.5.5_12.10.15_EN - D-Link

Contents

Download Pdf Manuals

Related Search

Related Contents