User Instruction Manual
Contents
1. The Heat Inside StormRider Temperature Controller USER INSTRUCTIONS WELCOME Your high performance StormRider Temperature Controller has been designed to promote flexible use and maximum enjoyment of your EXO2 heated gear PRODUCT CONTENTS e EXO2 StormRider Controller e User Instructions INSTALLATION The StormRider Controller is easy to mount and operate The controller mount is designed to fit onto the existing clutch cable mount or similar For example if using the clutch cable mount option simply remove the top bolt from the clutch mount pass it through the mounting plate and then refit the bolt back onto the clutch mount The StormRider Controller can also be mounted to the frame fairing or any other part of the bike which promotes safe operation of the vehicle and equipment The StormRider Controller connects to the battery via an inline 10 Amp fuse The fused line is connected to the motorcycle battery positive terminal and the other connected to the battery negative terminal The StormRider controller has an ON OFF switch and a digital readout The LED readout varies from 0 9 0 OFF No Power 1 50 Power and 9 100 Power When first switched ON the controller will default to the top level 9 100 power for fast warm up The selector button on the front will cycle the power level to the desired setting THE CONTROLLER S POSITIVE AND NEGATIVE LEADS MUST BE CONNECTED TO THE CORRESPONDING BATTERY TERMINALS TO I2. NSURE PROPER OPERATION THE FREQUENCY GENERATED BY ALTERNATIVE CONNECTIONS WILL INTEREFERE WITH THE OPERATION OF THE CONTROLLER AND COULD VOID THE WARRANTY DO NOT REMOVE THE CONTROLLER S BACKING PLATE FOR ANY REASON AT ANY TIME WARRANTY Every controller has a one year warranty covering all electronic and mechanical failures In the unlikely event that any part should fail within the first year return it to us and we will repair or replace it free of charge Note The warranty is void if alterations of any kind including but not limited to the removal of the backing mounting plate replacement of cable terminals etc are made to the controller The warranty does not cover accidental damage or improper cleaning TROUBLESHOOTING What happens if my StormRider Controller does not work 1 DO NOT attempt to replace or interfere with the electrical components of the controller 2 Call EXO2 at 877 EXO2 HEAT 877 396 2432 or email us at service exo2 com to obtain a Return Merchandise Authorization Number RMA 3 Return the unit to EXO2 The Heat Inside as instructed Should you have any questions about your heated products or accessories please contact The Heat Inside Customer Service EXO2 The Heat Inside NA LLC 300 Lester Mill Road Suite 220 Locust Grove GA 30248 TEL 1 877 exo02 HEAT WEB www exo2 com E mail service exo2 com
Download Pdf Manuals
Related Search