HWg-Ares 12 MANUAL: GSM/GPRS thermometer with SMS & Email
Contents
1. Alarm when the input is Off open e Email Send an e mail when the input is in Alarm e SMS Send a text message SMS when the input is in Alarm e Save Save all changes e Templ Alarm message template See the SMS Templ and Email Templ tabs The template is set independently for each input September 2013 www HW group com HW group page 16 HVVg Ares HVV group Sensors tab al AresConf configuration utility for HWg Ares www HW group com Sensor List ID Name Current Value Min ax Email Templ SMS Templ Serial Code Del 65535 Battery Monitor 100 25 0 4012207003072078 X v 26053 Sensor 26053 23 099 C 10 Deut vj 1 Defaut vj 28c5651703000013 Find Sensors Delete All Sensors Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure basic and advanced properties of sensors e State Graphical information about sensor states same as on the General tab e ID Unique sensor ID e Name Sensor name used for easier overview and for further processing in other systems e Current Value Current sensor value e Min Lower limit of the Safe Range If the value is less than MIN Alarm is automatically set e Max Upper limit of the Safe Range If the value is more than MAX Alarm is automatically set e Email Send an e mail when the sensor is in Alarm e SMS Send a text message SMS when the sensor i2. Email Queue 0 SMS Queue 0 USB Conection Connected data logging suspended while USB connected 1417 37 Sensor connected value within Safe Range no Alarm m disconnected Alarm EM Digital Input out of range upper threshold exceeded Alarm ES Digital Input out of range lower threshold exceeded Alarm September 2013 www HW group com page 9 HVVg Ares HVV group Digital Inputs tab ud AresConf configuration utility for HWg Ares www HW group com Name 0 Name 1 OFF ON OFF OFF Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure basic properties of digital inputs e State Graphical information about input states same as on the General tab e ID Unique sensor ID e Name Digital Input name used for easier overview and for further processing in other systems e Current Value Current input state o O Open power disconnected o 1 Closed power applied e Name 0 Name of the state when the input is Off contact open e Name 1 Name of the state when the input is On contact closed e Alarm Alert Specifies when the input is in Alarm o Disable Alarm is disabled for this input o Active if ON 1 Alarm when the input is On closed o Active if ON 0 Alarm when the input is Off open e Email Send an e mail when the input is in Alarm e SMS Send a text message SMS when the input is in Alarm e Sa
3. Show Password Recipient 4 Ring out Recipient 5 King oi Recipient 5 CI Ringout Template Default 7 Send Status SMS if ring from one of the alarm recipients Report End of Alarm Alam Reminder Period O disable 0 minutes Send Test SMS Clean 5M5 Queue Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure alarm text message SMS recipients Each recipient phone number is also authorized to request information from Ares 12 by dialing the unit s phone number and to send SMS commands without a password see Advanced settings e Recipient 1 5 Phone numbers where to send alarm text messages SMS o Ring out Upon alarm dial the given number The phone rings for 15 seconds rings three times or until the call is refused e Report End of Alarm Users will be also informed when an alarm ends global setting e Alarm reminder Send reminders about active alarms o Period Period of alarm reminders in minutes o Template Template to use for the reminder message e Send Test SMS Send a test SMS to all configured numbers e Clean SMS Queue Clear all unsent text messages from the queue e Save Save all changes e Status SMS Settings Ares can send a text message with the current sensor states as a reply to an incoming STATUS message If the phone number where the status request originated is not listed among the recipients a password needs to be
4. 1 2161 Fe iM iUlgred ola srai DR E E E oe eee 33 Text message CON AIG e RE EN TED LU SU dI SIME E Sm DEDE Ei 33 TOIDE NOONE oere 34 emmae Oy O a E ogg es Nep weno Ma DM TI DIY 35 MVS UNISON ONS e Su ia ut cu UU Neopades 35 Customizing user MESSA BES aaa aa nana aa aaa aaa en nai ene eee nennen nennen ness sere esa esa sete esa esae sa esas esa sese sese sese se te met n 36 DV NAN ER 39 September 2013 www HW group com page 3 HVVg Ares HVV group Basic features e Quadband modem GSM 850 900 1800 1900 MHz e Number of 1 Wire sensors o Ares12 2 o Ares 14 12 e External antenna e Support for PIN protected SIM e Alarm alerts o SMS up to 5 phone numbers o Ringing a specified number up to 5 phone numbers o Email up to 5 addresses with selectable priority e User templates for SMS and Email alarms different for each sensor e Periodic reminders about active alarms e Per sensor hysteresis settings e Logs periodically e mailed to up to 5 addresses independent from Alarm addresses with selectable priority e Configurable global interval for storing measured values 15 minutes by default e Support for portal based solutions with the HWg PUSH protocol o Periodic data transfer o Data transfer when values differ by more than the specified tolerance e Status request o SMS from a predefined number o SMS from any number containing a password o Ringing the device from a predefined number e Internal memory for measured values 2 MB 170 0
5. Otherwise it indicates a modem fault see Troubleshooting nvalid PIN PIN code stored in the Ares unit is incorrect PUK requested PUK code is needed must be entered in a different kind of device Ready to use Modem is registered to the carrier s network and ready for operation Dialing Connection to the carrier is being dialed necessary to establish GPRS connection This information should not appear for more than 20 s Otherwise it indicates a modem fault see Troubleshooting September 2013 www HW group com page 14 HVVg Ares HVV group Configuring Internet Internet connection is being configured reading IP parameters Connected to Internet The modem is successfully connected to the Internet Terminating Internet Internet connection is being disconnected Terminate Connection to the mobile netvvork vvas terminated This can appear when the device is being restarted switched off or when its battery is low Hanging Dial up connection is being hanged up Unknown state e Signal Quality GSM signal quality in dBm and as a percentage The percentage should be as high as possible If it is less than 50 we strongly suggest to relocate the antenna or use a different mobile carrier e Reg Operator Regional GSM carrier Indicates a successful connection to the GSM network and the actual carrier when roaming e FW version Current firmware version e
6. E mail period Interval for e mailing recorded values e Erase log after e mail Delete recorded values after e mailing them e Recipient 1 5 Addresses of recipients for e mails with logged data e Importance Importance of the e mail message Useful for mail filtering in e mail clients e Send Test Email Send a test e mail to all listed recipients e Get Log One time transmission of recorded data e Clear log Delete recorded data e Save Save all changes September 2013 www HW group com page 26 HVVg Ares HVV group Build Time Nov 32011 15 22 16 Uptime O days 1 hours 18 min Periodical Restart at Universal Time UTC 2 00 00 Upgrade Upgrade server http new hwg cz download Tw version hwg ares 12 js Check for fw version GSM Upgrade Local Upgrade Save Settings Set to Factory Default Status Done USB Conection Connected data logging suspended while USB connected Use this tab to display and set system variables upgrade firmware and save or restore configuration e System o Build Time Date and time of the current firmware build o Uptime Time since last restart e Periodical Restart Automatically restart the device o Daily Once per day o Weekly every Sunday Once every Sunday o Monthly every 1st day of month On the first day of every month o at Universal Time UTC Time for the automatic restart in UTC e Upgrade o Upgrade server Firmware URL or u
7. code is not entered in the Ares unit or it is incorrect Input the correct PIN in Advanced Config Mode on the GSM GPRS Internet tab e PUK requsted PUK code is required must be entered in a different kind of device The SIM is blocked until the correct PUK is entered Take the SIM out and unblock it in a mobile phone e Dialing Connection to the carrier is being dialed necessary to establish GPRS connection This information should not appear for more than 20 s Otherwise it indicates a modem fault Check the Dial number in Advanced Config Mode on the GSM GPRS Internet tab When in doubt contact your mobile carrier e Configuring Internet Internet connection is being configured reading IP parameters Check the APN in Advanced Config Mode on the GSM GPRS Internet tab Connected sensor cannot be found Make sure that the sensors are properly connected e Restart Ares e Press Find Sensors on the Sensors tab to detect the missing sensor e Press Delete All Sensors to remove all sensors then press Find Sensors to find them again I am receiving too many alarm messages Check the hysteresis setting By default hysteresis is set to 1 without regard to the measured quantity However in some cases this hysteresis is too low September 2013 www HW group com page 34 HVVg Ares Internal memory size HVVg Ares is equipped vvith 2MB internal memory for storing measured values The available recording time depends on the n
8. provided by the remote portal HWg Ares only retrieves it Push Period Interval for sending the values in seconds Log Period Interval for logging records into memory in seconds Data are then transmitted together according to the configured Push Period The memory can hold up to 10 measurements Delta Temperature Difference in temperatures that triggers immediate data transmission Delta Humid amp Other Difference in humidities and other quantities that triggers immediate data transmission Refresh Update the received settings Manual Push Manual transmission for test purposes Save Save all changes September 2013 www HW group com page 25 HVVg Ares HVV group Logger al AresConf configuration utility for HWg Ares www HW group com SMS Templ Email Templ GSM GPRS Intemet Log Logger Settings Log Email Settings WARNING Data logging suspended while USB connected Recipient 1 recipient domain com Datalog Total Size 0 bytes Recipient 2 Recipient 3 Log Period D disable seconds Recipient 4 Email Period O disable hours TODO ZATIM V sec Recipient 5 E Ease Log ater Ena potere Send Test Email Get Log TODO NEFU Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure logging of measured values e Datalog Total Size Current size volume of recorded data in bytes e Log Period Interval for storing measured values e
9. 00 records e Simple configuration with an intuitive Windows utility e Connects to PC over USB without special drivers Mass Storage HID e Power failure indication through a virtual input supports alarms e Battery status indication supports alarms e Option to activate deactivate GPRS when roaming SMS alarms and control still 10096 functional e Wall mount DIN rail mount options e Firmware upgrade over USB or GPRS On the Fly Over the Air o Upgrade can be started with a SMS command e Logging stops when Ares is connected to USB e Sensors are automatically detected when the device is turned on e Alarm information available immediately after powering up September 2013 www HW group com page 4 HVVg Ares HVV group Description of connectors and connections H W group HWg Ares12 GSM GPRS monitoring SIM Card Sensors LED indicators e Alarm red Indicates alarm status One or more sensors read outside of the allowed range or an alarm at one or more inputs 2x Digital Inputs or external power supply indication e Modem blue Informs about GPRS connection o Fast blinking GPRS connection is being established o On Connection established o Slow occassional blinking Communication takes place e Status yellow o Fast blinking GSM connection is being established o Blinking 1x second Device works normally e Power green Power is connected Blinks when the device runs on battery September 2013 w
10. Email Queue Number of outgoing e mails waiting in the queue e SMS Queue Number of outgoing text messages waiting in the queue Digital Inputs ID 8 External Power is a system entry that indicates connected disconnected external power supply It is used to inform about power failures and battery powered operation Sensors ID 65535 Battery monitor is a system entry that informs about the battery charge level September 2013 www HW group com page 15 HVVg Ares Digital Inputs tab al AresConf configuration utility for HWg Ares www HW group com Current Value Name 0 Name 1 Alarm Alert Email Templ SMS Templ o om Cm E OFF ON Disable Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure basic and advanced properties of digital inputs e State Graphical information about input states same as on the General tab e 1D Unique sensor ID e Name Sensor name used for easier overview and for further processing in other systems e Current Value Current input state o O Open power disconnected o 1 Closed power applied e Name 0 Name of the state when the input is Off contact open e Name 1 Name of the state when the input is On contact closed e Alarm Alert Specifies when the input is in Alarm o Disable Alarm is disabled for this input o Active if ON 1 Alarm when the input is On closed o Active if ON 0
11. HLVoroup HVVg Ares 12 14 MANUAL HVVg Ares HVV group Package contents A complete shipment contains the follovving items e HVVg Ares unit e Printed manual datasheet Safety information The device complies with regulations and industrial standards in force in the Czech Republic and the European Union The device has been tested and is supplied in working order To keep the device in this condition it is necessary to adhere to the following safety and maintenance instructions Using the device in a manner other than prescribed by the manufacturer may cause its safeguards to fail The power supply outlet or disconnection point must be freely accessible In particular the device must not be used under any of the following conditions e The device is noticeably damaged e The device does not function properly e Unfastened parts can move inside the device e The device has been exposed to moisture or rain e The device has been serviced by unauthorized personnel e The power adapter or power supply cable are noticeably damaged e If the device is used in a manner other than designed for the protection provided by the device may fail e The local electrical system must include a power switch or a circuit breaker and overcurrent protection If you have any problems with installing or operating the device please contact technical support HW group s r o http www hw group com Email support OHVVg cz U Pily 3 143 00 Pra
12. Intemet Current Value 11 375 C 100 Signal Quality 53 d m 96 Reg operator Vodafone CZ FW Version 1 0 5h Email Queue 0 SMS Queue 0 Status Done USB Conection Connected data logging suspended while USB connected This tab gives information about sensors and digital inputs together with graphical symbols for quick overview You can set the Device Name and the unit of temperature C F K here The temperature unit changes about 5 seconds after pressing Save When starting the device for the first time pay attention to the mobile network connection and signal strength information If the signal is too weak relocate the antenna If the modem is unable to log in to the GSM network check the PIN security code settings of the SIM For details see Advanced settings Digital Inputs ID 8 External Power is a system entry that indicates connected disconnected external power supply It is used to inform about power failures and battery powered operation Sensors ID 65535 Battery monitor is a system entry that informs about the battery charge level September 2013 www HW group com page 8 HVVg Ares HVV group All deviations from normal are indicated graphically oJ AresConf configuration utility for HWg Ares www HW grou Curent Time 8 11 2011 14 16 45 Last 5ync Time 8 11 2011 8 07 58 Modem Status Ready to use Signal Guality 53 dBm 96 Reg operator Vodafone CZ FW Versian 1 0 5h
13. Servers o List of stratum two time servers https support ntp org bin view Servers StratumTwoTimeServers List of NIST time servers http tf nist gov tf cgi servers cgi List of NTP pool servers https support ntp org bin view Servers NTPPoolServers and http www pool ntp org e Time Zone Time zone where Ares is used e Sync Period Indicates how often to synchronize time over the Internet 1h 24h e Daylight Saving Time Activates automatic change to from DST e Sync After Device Startup Synchronize time over the Internet whenever the device is powered on e New Day Shows the current date and lets the user change it manually e New Time Shows the current system time and lets the user change it manually e Synchronize Time Immediately synchronize time Only works when the GPRS connection is functional e Set Time Manually Store the changed date and time values to memory e Save Save all changes September 2013 www HW group com page 18 HVVg Ares HVV group SMS tab al AresConf configuration utility for HWg Ares wwwHW greupcom LU i SMS Templ Email Templ GSM GPRS Intemet Alam SMS Settings Status SMS Settings Recipient 1 IMI Ring out Status SMS you can get by sending 5M5 request with text STATUS to number of your HWg Ares If your phone number is not one of five SMS Recipient 2 7 Ring out recipients you have to send SMS with format PASSWORD STATUS Recipient 3 DI Ring out Status SMS Password
14. VALUE amp SRC UNIT ESRC STATUS ESRC MINS ISRC MAX SRC ALARMS Sensor with ID XXXX September 2013 www HW group com page 20 HVVg Ares HVV group Preview window Alarm ACTIVATED Hi Input 1 value Open 0 is on state normal Your Ares September 2013 www HW group com page 21 HVVg Ares HVV group E mail tab ed AresConf configuration utility for HWg Ares wwwHW groupcom le 1 Email Templ GSM GPRS Intemet Alarm Email Settings Outgoing Server Settings Recipient 1 almr amp hw cz SMTP Server mail hw cz Recipient 2 SMTP Port 25 Recipient 3 Lsemame smtp Recipient 4 Password e Show Password Recipient 5 Importance Secure Connection SSL N STARTTLS Report End of Alarm General Email Settings Alarm Reminder Period disable 0 minutes Outgoing Email Address aresl2 amp ghwg cz Send Test Email Clean Email Queue Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure alarm e mail recipients and parameters e Recipient 1 5 Addresses of recipients for alarm e mails e Importance Importance of the e mail message Useful for mail filtering in e mail clients e Report End of Alarm Users will be also informed when an alarm ends global setting e Alarm reminder Send reminders about active alarms o Period Period of alarm reminders in minutes o Template Template to use for the reminder message e SMTP S
15. alue 0 D 1 Device Mame Temperature Linit Curent Time 8 11 2011 13 45 36 Last Sync Time 8 11 2011 8 07 58 Modem Status Connected to Intemet Mame Current Value Sensor 1369 11 375 C Battery Monitor 100 3 Signal Quality 53 dBm 96 Reg operator Vodafone CZ FW Version 1 0 5h Email Queue 0 5M5 Queue 0 Status Done USB Conection Connected data logging suspended while USB connected This tab gives information about sensors and digital inputs together with graphical symbols for quick overview e Device name Device name Useful for sorting in higher level systems or to tell apart several Ares units e Temperature Unit Units used to work with temperature The temperature unit changes about 5 seconds after pressing Save Celsius C Kelvin K Fahrenheit F e Current Time Informs about the current system time set in the device The time appears in the log of measured values e Last Sync Time Date and time of last time synchronization over the Internet Useful for checking if the time synchronization works e Modem status Information about the current modem status and readiness SIM unplugged No SIM was found Insert a SIM or clean its contact pads Modem initializing Modem is being initialized The device is establishing communication with the modem and making the modem ready for operation This information should not appear for more than 10 s
16. ass 1 1 VV 9 1800 1900MHz IP TCP UDP HTTP SNTP SMTP HWg PUSH Ver 1 00 compatible partial ver 2 0 implementation Interface Supported protocols SNMP compatibility SENSORS HWg original accessories 1 Wire amp 1 Wire UNI RJ11 1 Wire Bus Ares12 Up to 2 sensors Ares14 Up to 14 sensors Up to 60m Type Connector Sensors Sensor distance DRY CONTACT INPUTS 11 12 Digital Input supports NO NC Dry contact ns 1 On 0 500 Q Right pin on the terminal block can be connected to 12V Sensitivity GND Up to 50m POWER input Port Type Connector POWER 9 30V DC Main device power input typically 500 mA Jack barrel inner 2 5 mm outer 6 3 mm Terminal Block Physical parameters Operating 10 to 65 C 14 to 150 F Storage 25 to 85 C 13 to 185 F Dimensions Mass 98 x 92 x 30 mm 150g EMC FCC Part 15 Class B CE EN 55022 EN 55024 EN 61000 Temperature range September 2013 www HW group com page 7 HVVg Ares HVV group First steps Connect Ares to PC with an USB cable and open the ARES disk that appears Double click the AresConf application to start it The General tab appears and shows the device status a AresConf configuration utility for HWg Ares www HW group com Show in Advanced Mode USB Connection Device Name Ares Curent Time 8 11 2011 13 49 36 Last Sync Time 8 11 2011 8 07 58 Modem Status Connected to
17. changes to 15 minutes a HWg STE Push SensDesk Mozilla Firefox za Soubor Upravy Zobrazeni Historie Zilgiky Nistroje Nipov da fe HWg STE Push SensDesk Ld gt Si sensdesk com E P 4 A E Login attempt Messages Log out IP sensors portal Dashboard Devces Sensors Device groups HVVg STE Push Upravit Edit sensors Address 192 168 2 4 Username Popis Port 80 Password Push parameters Invtabon ID State Sensor Name Hodnota Unit Activity Akce 578 9 Sensor 6313 54 4 35 RH 7 sec ago upravit smazat o Sensor 7313 27 1 j sec ago upravit smazat If you check your user account configuration My Account link you will find your Push Device Password This password together with your login name identifies the device in communication with your account and in communication of mobile applications with SensDesk The password cannot be changed and for a security reason it is different to the login password e attempt SensDesk Mozilla Firefox Oo EN Soubor Upravy Zobrazreni His lipov d E attempt SensDesk E sensdesk com p 4 u Logn attempt My account Messages Log out IP sensors portal Dashboarc d Devices Ser D group attempt Upravt values mi Portal configuration in devices Portal configuration for user Simple SMS alarm default gateway Kountry Czech Republic History Meenber for 11 min 23 se HW group 2013 SensDesk Free online portal for your IP sensors S
18. ctions Alarm information after power up When any sensor or digital input is in alarm when the power is connected all alarm messages according to Ares configuration are sent as soon as the GSM GPRS connection is established Text message commands 1234 STATUS Test Value OFF 0 of input Input 1 is on state normal Your HWgAres12 1234 is the default password You have to use it if your number is not listed as onr of 5 SMS recipients In case you are not using the default password it has to be only one word password cannot contain any breaks e STATUS or STATUS SMS Sends a text message with the current status e STATUS EMAIL Sends an e mail with the current status e RESET or REBOOT Restarts the Ares unit e DEBUG Returns debugging information e UPGRADE Without further parameters upgrades the firmware using the configured address Full URL can be included in the message September 2013 www HW group com page 33 HVVg Ares HVV group Troubleshooting Modem does not respond Check the information in the Modem Status field on the General tab e SIM unplugged No SIM was found Insert a SIM or clean its contact pads e Modem initializing Modem is being initialized This information should not appear for more than 10 s Otherwise it indicates a modem fault If this message persists check the SIM clean its contact pads if necessary and press Reset to restart the unit e Invalid PIN PIN
19. d data logging suspended while USB connected Modem Ready to use Version 1 0 191 336 September 2013 www HW group com page 28 HVVg Ares HVV group 3 Tick the Enable Portal option and save the changes using the Save button in the bottom right corner of the vvindovv Then click the Manual Push button in order to activate the portal function Ox Portal Portal Server Settings Server Address http sensdesk com portal php Port 80 Usemame Password Portal Message Status Ready USB Connected data logging suspended while USB connected Modem Connected to Internet 155 sec Version 1 0 131 336 Instead of Portal disabled a link SensDesk com register your IP sensor should appear in the Portal Message field Click this link in order to get to the SensDesk portal e HWg STE Push SensDesk Mozilla Firefox cm Soubor pravy Zobrazen Historie Z lo ky N stroje N pov da amp amp HWg STE Push SensDesk Lx Si sensdesk com sensdesk invitation 116 control 000A5901E7C3 e B Google 4 A u Login a SensDesk IP sensors portal HWg STE Push Address 192 168 2 4 Username Port 80 Password ID State Sensor Name Hodnota Activity 578 Sensor 6313 40 2 Yol 1 sec ago 579 Sensor 7313 25 3 9 1 sec ago Sensors with unit RH E Senpesk a Username Password Register to Portal reset password or Login Sensors with unit C 25 3 NM Sensor 7313 September 2013 www HW gr
20. edit e Subject Subject of the e mail Macros can be used e Text Message contents with macros as variables e Help list of supported macros List of macros that can be used in the message See the SMS Template tab e Preview Displays a dialog with a preview of the message See the SMS Template tab e Save Save all changes September 2013 www HW group com page 23 HVVg Ares HVV group GSM GRPS Internet tab a SIM Card Settings SIM Card PIN Show Password Enable GPR5 Intemet GPRS Operator Settings Show Advanced GPRS Settings APN Address intemet Usemame Dial Number ATD 59 1H Dialup String Roaming Use Intemet connectivity if roaming is detected Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure the GSM and Internet connection details e SIM Card PIN Specifies the security PIN code for the SIM The SIM can remain protected with the PIN e Show Password Display the entered PIN e Enable GPRS Internet Enable Internet based services such as sending e mail portal services and time synchronization e GPRS Operator Settings Settings for accessing the GPRS network of the mobile carrier o APN Address Access Point Name identifier The default is internet Your mobile carrier can advise if another is needed o Dial Number Phone number for accessing the Internet The default is 99 1 Your mobile carrier can advise
21. eptember 2013 www HW group com page 31 HVVg Ares HVV group 8 PUSH Device Password can be used in devices to skip the logging procedure during assigning the device to your portal account or in mobile applications e Portal Mozilla Firefox ED EC Soubor py Zobraze Histor Z kiky N stroje N pov de fe attempt SensDesk sf Portal x s 192 16824 B pj HWg STE Push Home Graph General Setup SNMP Email Time Sensors Portal System Portal HVVg Sensors Group Doma 4 Vitek Doma Current VitekDoma 4448 557 kWh Energy 23820 9 kWh 4136442 Wh Sao ood cm oe Reload Sensors Page Portal function periodically sends the data to a remote server and the sending period is set by this server AutoPush is a function allowing unusual measured data sending beside the periodical logging in case that the value change is higher than the AutoPush delta parameter September 2013 www HW group com page 32 HVVg Ares HVV group How to reduce operating costs HVVg Ares units offer functions for reducing overhead GSM GPRS costs particularly in the following scenarios e Networks that limit the maximum volume of transferred data e Subscribers without a flat rate data plan Primary cost saving options e Disabling GPRS Internet functions e Disabling data services when roaming outside of the home network e Terminating GPRS connection when idle for longer than 60 seconds Special fun
22. erver IP address or host name of the SMTP server to use for sending e mail e SMTP Port TCP port where the SMTP server listens e Username Username for authentication to the SMTP server e Password Password for authentication to the SMTP server e Show Password Display the actual password instead of asterisks e Secure Connection SSL No STARTTLS Enables encrypted authentication e Outgoing Email Address Sender e mail address E mails will be sent to the recipients from this address e Subject Subject prefix Useful for adding a keyword to the e mail subject in order to simplify mail filtering e Send Test Email Send a test e mail to all listed recipients e Clean Email Queue Clear all unsent e mails from the queue e Save Save all changes Ask your network administrator or mobile carrier for this information September 2013 www HW group com page 22 HVVg Ares HVV group Email Template tab al AresConf configuration utility for HWg Ares www HW group com Email Templates Template Subject usei gt Subj SDEV NAME SMSG TYPES ORC NAMES value SRC VALUEStSRC UNITS is on state 5RC_STATUSs Your DEV NAMES Help list of supported macros Status Done Use this tab to define the format of individual messages e g to distinguish temperature alarm messages from humidity alarm messages or to define the contents of status and reminder messages e Template Selects the template to
23. evice L Meter 1012 Value 7 Va ue 4 bytes Pb cate Email Ts Value Ep He AR SMS Enable Enable O Disable v i _ Input It means that currently is allowed 1 values from 30 t Portal The TimeTamp is stored in Unix time format T Meter cout s mum time t More information about the format you can find for example here http en wikipedia org wiki Unix time The Value is stored without decimal point An exponent tells you were you have to move decimal point to get real value mathematical expression right value value 10 sensor with ID 1012 and exponent 3 If this function is allowed the total loging time is reduced Exponent Tarif zero Offset Value from MBUS Final Value 14458 942 kWh AF On screen shot you can see an example of Soubor pravy Zobrazen Historie Z lo ky N stroje Napovi The exponent you can get from values xml too On following screen httpy192 168 1 74 valuesxml 4 shot there is the same information about the the same sensor you P 8 192 168 1 74 values xml can see in values xmi file Meeste besoek Getting Started RESENI PADU ic e lt cfg gt 5 lt cfg gt lt Name gt M Count lt Name gt lt Address gt 0 lt Address gt But there is a few little differencies betwen these devices Some of o e them store data in little endian format and others in big endian More Boc ee information about e
24. ha 4 Tel 420 222 511 918 When contacting technical support please note the exact type of your device at the type plate and if possible the firmware version September 2013 www HW group com page 2 HVVg Ares HVV group Table of Contents Package CODO S e a ee ee eee 2 Se TMOG C1 OU m Nm 2 PASOI BS ospite EEUU PON MI RPM MEME IUUENIS UNA 4 Description of connectors and con Ne ti O NS aaa aaa aa aaa nanen near nena eee eren e tee enes eee nete tee e enet eee ene e eee ete nnns 5 SS SS RP PE KT 8 Del MOE AD Rn Sessn UM MID KMMIM uU EPUM MMN UR SPU MD MONDE 10 TI eT 11 esc 12 atri CAO sapere Tm 13 en cen SEENE eret E pen tus eC ee eee eee e EU E ME 14 GS NSU E 14 Dicit ORCS Cd ad bern cece dist ehe iat a era sien coats dedita etes mU dta esse INI dise Maui Maium eU SR UR 16 ein c 17 aco E 18 hr c 19 Sido 20 EETA Dee a E e PE E 22 ERA TEMP leta tern en E One tot a ern E OE eae ee eee ee 23 GSM GRPS Internet taD gas sec 24 POR 25 beri pde 26 SS E E E 21 HOW CO reduce operating COSTS ga ate E EE 28 Primary cast savine ODIO 1 S esseer erR a E E E EEN 33 i
25. if another is needed e Roaming Enable Internet connection outside of the home carrier network e g when traveling abroad e Show Advanced GPRS Settings Display advanced settings that are accessible directly using AT commands for experts only e Username User name for the connection Will be provided by the mobile carrier if needed e Password Password for the connection Will be provided by the mobile carrier if needed e Dialup String AT string Will be provided by the mobile carrier if needed e Save Save all changes September 2013 www HW group com page 24 HVVg Ares HVV group Portal al AresConf configuration utility for HWg Ares www HW group com E Enable Portal Portal Server Settings Push Settings Server Address http some server portal xml Push Period O disable seconds Part 80 Log Period disable seconds Usemame Delta Temperature Password Delta Humidity Manual Push Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure the HWg PUSH protocol Enable Portal Enable transmission of data to a remote portal HWg PDMS etc Server Address HTTP address of the portal where the data should be sent Port TCP port of the remote portal default 80 Username Username for authentication to the portal Password Password for authentication to the portal Push Settings Current PUSH settings Information is
26. ined custom types of e mail and text messages The follovving macro commands can be used to insert system variables sensor names and measured values List of macro commands Name General DEV_NAME MSG_TYPE Source sensor SRC_NAME SRC_VALUE SRC_UNIT SRC_STATUS SRC_MIN SRC_MAX SRC_ALARM Sensor with IDZXXXX KNAME XXXX96 9 VALUE XXXX96 KUNIT XXXX96 STATUS XXXX9 6 KIMIN XXXX96 96 MAX XXXX96 ALARM_XXXX September 2013 Description General macros Device name Message type Alarm status periodic Sensor name Current value Unit of the measured value Sensors Invalid Normal Alarm Out Of Range Digital inputs Normal Alarm Lower limit of the Safe Range Upper limit of the Safe Range Alarm begin end Information about other sensors to include in the message XXXX sensor name XXXX sensor reading XXXX sensor unit of measurement Sensors Invalid Normal Alarm Out Of Range Digital inputs Normal Alarm Lower limit of the Safe Range XXXX Upper limit of the Safe Range XXXX Alarm begin end www HW group com page 36 HVVg Ares HVV group Datalog format of devices HWg PWR and HWg Ares The data is stored in a simple binary format record1 record2 record3 gt lt record4 gt lt record5 gt lt recordN gt The record format is following HWg PWR25 M Bus Noten Sensor ID 2 bytes m Bean conto i TimeStamp 4 bytes A General Setup ra ModBusTCP D
27. nad zen E MB OneNote Ms Za adit do kategori Sh E L N av Odstranit v d t v d t Pfedat Em pisi zj I fes t felozit 25 Nevyi dan posta rani pov d etim i jen EH Dal E mail t mu fe pi EP Akce gt Zpracos s i he upa Odstranit Odpovedet Rychl kroky Fa Presunout Znacky Fa Upravy Lupa pa 23 8 2013 9 44 sensdesk sensdesk com Account details for attempt at SensDesk Komu Vit Olmr i V t to zpr v byly odebr ny nadbyte n konce dk attempt Thank you for registering at SensDesk You may now log in by clicking this link or copying and pasting it to your browser link D www sensdesk com user reset 278 1377243820 W4Z1Q zTbbl0Wxr5y8jvSMNK RMVuvHosLEyATED 1Y This link can only be used once to log in and will lead you to a page where you can set your password After setting your password you will be able to log in at http www sensdesk com cs user in the future using username attempt password Your password SensDesk team Kliknutim na fotku se zobrazi nedavn e maily a aktualizace ze socialnich siti Es v desk desk Vit OI September 2013 www HW group com page 30 HVVg Ares HVV group 6 7 By activating the account you vvill be redirected to the Invitation page of the device At this moment the data sending period is set to 10 seconds to show the sensors functionality This page is active only for approximately 15 minutes after the activation then the logging period
28. ndianness you can see for example here lt Name gt Spotieba lt Name gt aia yi lt Units gt kWh lt Units gt http en wikipedia org wiki Endianness And some of them store lt Value gt 17725 253 lt Value gt lt RawValue gt 17725253 lt RawValue gt lt Exp gt 3 lt Exp gt lt alarm_start gt 0 lt alarm_start gt lt alarm_end gt 0 lt alarm_end gt timestamp in local and others in universal time Endiannees TimeStamp lt hyst gt 0 lt hyst gt zero offset gt 0 lt zero offset State 1 State Statel1 Normal State1 gt 2KIals universal time UTC HWg PWR 25 op og x Default is datalog written on standard output Gona iG ewe mecca Or eo iO eric nv include lt stdio h gt include lt time h gt include lt winsock h gt For device HWg PWR 25 and HWg Ares uncomment next line define ARES ifdef ARES define HTONS VAL VAL define HTONL VAL VAL telse define HTONS VAL htons VAL define HTONL VAL htonl VAL Fendi September 2013 www HW group com page 37 HVVg Ares HVV group September 2013 www HW group com page 38 HVVg Ares HVV group Mechanical _ 76 0 E _ 32 8 EE d C em m C 2S BRE rn ja eM S a mm T gt o z so E s N lt amp Y September 2013 vvvvvv HVV group com page 39
29. no 65535 is a system entry and cannot be deleted e Save Save all changes September 2013 www HW group com page 11 HVVg Ares HVV group SMS tab Show in Advanced Mode Alam SMS Settings Recipient 1 Recipient 2 Recipient 3 Recipient 4 Recipient 5 Report End of Alarm Send Test SMS Status Done USB Conection Connected data logging suspended while USB connected Er Use this tab to configure alarm text message SMS recipients Each recipient phone number is also authorized to request information from Ares 12 by dialing the unit s phone number and to send SMS commands without a password see Advanced settings e Recipient 1 5 Phone numbers where to send alarm text messages SMS o Ring out Upon alarm dial the given number The phone rings for 15 seconds or until the call is refused e Report End of Alarm Users will be also informed when an alarm ends global setting e Send Test SMS Send a test SMS to all configured numbers e Save Save all changes September 2013 www HW group com page 12 HVVg Ares HVV group E mail tab Show in Advanced Mode Alarm Email Settings Outgoing Server Settings Recipient 1 SMTP Server mail hw cz Recipient 2 SMTP Port 25 Recipient 3 Llsemame smtp Recipient 4 Password e Show Password Recipient 5 Secure Connection SSL is Mi 5 STARTTLS Report End of Alarm General Email Settings Outgoing Email Address aresi2 amp hwg cz Subjec
30. oup com page 29 HVVg Ares HVV group 4 Incase you already have a user account please enter your login details and the device will be automatically assigned to your account If you do not have a SensDesk account yet click the Register to Portal link and a registration form will be shown a U ivatelsk et SensDesk Mozilla Firefox O ER Soubor Upravy Zobrazen tistane Z lg ky M strje Nipoy da fgg Utivatelshy et SensDesk S 3 sensdes kcom ESen pek u Username attempt E mail address Password Confirm password 5 Enter the login details for your new account and a correct e mail address This e mail address has to be unique for the server cannot be already registered by another user Company name allows you to create your own 3rd level domain usually company sensdesk com A user name will be used if the Company name field is left empty After clicking the Create new account button a user account will be created and at the same time a confirmation email is sent to the entered e mail address This e mail contains a confirmation link which has to be used in order to activate the account HS Account details for attempt at SensDesk Zpr va Prost Text D X Seles ZPR VA ESET ui SR 2 pravdla Gv Ozna it iak ten y Ie Ignoroy vat X ff x 2 E Sch zka e Tickety Yaa E Pravidla py Ozna it jako nep e ten at n Aa ai n F m 3 Piedat
31. pgrade configuration file URL o Check for fw version If the URL of the config file is specified check for the availability of a firmware upgrade o GSM Upgrade Upgrade the firmware over GSM GPRS Correct address needs to be specified in the Upgrade server field o Local Upgrade Upload firmware from the local computer through a standard dialog window e Load Settings Load a previously stored configuration from a setup xml file e Save Settings Save the current configuration into a setup xmi file e Device reset Restart the device e Set to factory Default Restore factory default settings of the device e Save Save all changes September 2013 www HW group com page 27 HVVg Ares HVV group Connecting to the Portal 1 First povver on the Ares and connect it vvith your computer via provided USB cable Ares vvill appear on your PC as an external drive In its main directory open ARESCONF exe ARES D Obecn mo nosti Otevrit slo ku a zobrazit soubory x pomoci programu Pr zkumnik Windows 2 In AresConf first switch to Advanced mode by clicking the button in the top right corner of the window then go to Portal tab em Connected Device Name Ares 1 Current Value 0 Curent Time 25 2013 13 09 31 1 Last 5ync Time 29 2013 13 00 02 Modem Status Ready to use Signal Quality 53 dBm 96 Reg operator Vodafone CZ FW Version 1 0 13 Email Gueue 0 SMS Queue 0 USB Connecte
32. s in Alarm e Del Remove the sensor from the list e g when the sensor is disconnected If the sensor remains physically connected it will be detected again when the Ares unit is restarted Sensor no 65535 is a system entry and cannot be deleted e Find Sensors Detect all connected sensors By default sensors are detected only when the unit is powered up Sensors connected later must be discovered manually Detected sensors are automatically added to the list e Delete All Delete all discovered sensors Sensor no 65535 is a system entry and cannot be deleted e Save Save all changes e Hyst Hysteresis for the given sensor e Templ Alarm message template See the SMS Templ and Email Templ tabs The template is configured independently for each sensor September 2013 www HW group com page 17 HVVg Ares HVV group Time tab SNTP Setup Time Setup SNTP Server europe pool ntp org New Day 8 11 2011 Time Zone New Time 18 42 09 Sync Period Set Time Manually Daylight Saving Time Sync after Device Startup Synchronize Time Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure the current system time The time can be set either manually in Time Setup or automatically over the Internet e SNTP Server URL or IP address of the time server to use o List of stratum one time servers https support ntp org bin view Servers StratumOneTime
33. specified as well o Status SMS Password Password required to send the status message to a number not listed among alarm recipients Show password Displays the password in a readable form Template Template to use for the status message Send Status SMS if ring from one of the Alarm recipients Status message is sent whenever any of the alarm recipients calls the device e Save Save all changes September 2013 www HW group com page 19 HVVg Ares HVV group SMS Template tab all AresConf configuration utility f General Digital Inputs Sensors SMS Templ Email Email Templ GSM GPRS intemet Portal Logger System SMS Templates Template User 1 Text M5G TYPE Hi t5RC_NAMFS value 5RC VALUEZSZSRC UNITS is on state 3EC STATUS Your DEV NAMES Help list of supported macros Status Done USB Conection Connected data logging suspended while USB connected Use this tab to define the formats of individual messages e g to distinguish temperature alarm messages from humidity alarm messages or to define the contents of status and reminder messages e Template Selects the template to edit e Text Message contents with macros as variables e Help list of supported macros List of macros that can be used in the message e Preview Display a dialog with a preview of the message e Save Save all changes Macros window General amp DEV NAME MSG TYPE Source sensor amp SRC
34. t Ares Send Test Email Status Done USB Conection Connected data logging suspended while USB connected Use this tab to configure alarm e mail recipients and parameters e Recipient 1 5 Addresses of recipients for alarm e mails e Report End of Alarm Users will be also informed when an alarm ends global setting e SMTP Server IP address or host name of the SMTP server to use for sending e mail e SMTP Port TCP port where the SMTP server listens e Username Username for authentication to the SMTP server e Password Password for authentication to the SMTP server e Show Password Display the actual password instead of asterisks e Secure Connection SSL No STARTTLS Enables encrypted authentication e Outgoing Email Address Sender e mail address E mails will be sent to the recipients from this address e Subject Subject prefix Useful for adding a keyword to the e mail subject in order to simplify mail filtering e Send Test Email Send a test e mail to all listed recipients e Save Save all changes Ask your network administrator or mobile carrier for this information September 2013 www HW group com page 13 HVVg Ares HVV group Advanced settings Advanced settings are enabled by pressing the Show in Advanced Mode button General tab al AresConf configuration utility for HWg Ares www HW group com Show in Advanced Mode USB Connection Digital Inputs Current V
35. umber of values being stored One value takes up 12 bytes of memory Therefore 2048kB 1024 2 097 152B 12B approximately 170 000 records due to the internal memory organization the actual number is slightly smaller Examples 3 values Stored once per 300 s 170 000 3 56 666 records 4722 hours 196 days 1 value Stored once per 30 s 170 000 records 85 000 minutes 1416 hours 54 days 2 values Stored once per 180 s 170 000 2 85 000 records 4250 hours 177 days 1 Wire UNI sensors 1 Wire sensors are connected using RJ 12 jacks 1 Wire UNI sensors are a special kind of 1 Wire sensors They communicate using the same protocol over the same interface but also contain added circuitry for connecting special probes For this reason 1 Wire UNI sensors may require an additional power supply Sens UDI 86 When the 1 Wire UNI sensors do not explicitly require external power a maximum of two 1 Wire UNI sensors can be connected to one Ares port More sensors can only be connected through the 1 Wire HUB Power active hub HW group 1 Wire UNI sensors strongly influence how long the internal Ares battery lasts This needs to be taken into account when planning your system For more information about connecting 1 Wire UNI sensors carefully read the user manual for the respective sensor September 2013 www HW group com page 35 HVVg Ares HVV group Customizing user messages Ares supports up to 4 user def
36. ve Save all changes September 2013 www HW group com page 10 HVVg Ares HVV group Sensors tab Name Current Value Min Max Email SMS Del Sensor 1369 11 299 TC 6 eut 65535 Battery Monitor 100 25 100 O O Status Refreshig values USB Conection Connected data logging suspended while USB connected Use this tab to configure basic properties of sensors e State Graphical information about sensor states same as on the General tab e 1D Unique sensor ID e Name Sensor name used for easier overview and for further processing in other systems e Current Value Current sensor value e Min Lower limit of the Safe Range If the value is less than MIN Alarm is automatically set e Max Upper limit of the Safe Range If the value is more than MAX Alarm is automatically set e Email Send an e mail when the input is in Alarm e SMS Send a text message SMS when the input is in Alarm e Del Remove the sensor from the list e g when the sensor is disconnected If the sensor remains physically connected it will be detected again when the Ares unit is restarted Sensor no 65535 is a system entry and cannot be deleted e Find Sensors Detect all connected sensors By default sensors are detected only when the unit is powered up Sensors connected later must be discovered manually Detected sensors are automatically added to the list e Delete All Delete all discovered sensors Sensor
37. ww HW group com page 5 HVVg Ares HVV group Inputs 2x Digital Input for connecting a voltage free dry contact Logic LOW contact open when the resistance between terminals is greater than 15 kOhm Logic HIGH closed contact when the resistance is less than 2 7 kOhm Resistances between these values are undefined Power Power supply 9 30V 500mA can be connected to the power terminals or the power barrel connector The terminals and the connector are interconnected and can NOT be used to connect two different power sources e g adapter and back up battery Sensors 2x independent port for connecting 1 Wire sensors with support for 1 Wire UNI Each port can be connected to a bus maximum length is 60 m The total number of supported sensors is a device wide limitation the sensors can be connected to one port or distributed among both ports in any Way Caution There is a limit of two 1 Wire UNI sensors per port Some 1 Wire UNI sensors may require an active hub see 1 Wire UNI sensors Sim Card Standard plug in SIM GSM SMA connector for an external antenna The external antenna needs to be QuadBand capable and equipped with a male SMA connector External antenna is required for proper operation of the device September 2013 www HW group com page 6 HVVg Ares HVV group Specifications GSM GPRS Quad Band 850 900 1800 1900 MHz GPRS class 10 8 Compliant to GSM phase 2 2 Class 4 2 VV 850 900 MHz Cl
Download Pdf Manuals
Related Search