Hicator
Contents
1. a master workpiece or a gauge block If the Hicator needs to be finely moved up and down at this time it is greatly convenient to use the stand with a fine feed mechanism The limit pointer positions can be adjusted by loosening each limit clamp Clamp the limit pointers at given positions according to the K upper and lower tolerance limits of a workpiece to be measured 2 es It is possible to move the Hicator spindle up down using the supplied stand etc release Remove the release cap from the Hicator and screw the release tip in the same position The release is convenient for use in a case that a workpiece cannot be slipped in for measurement with the contact point being in contact with it Release Mitutoyo2. User s Manual H icato r No 99MAG015B Series No 524 E Operating Environments Use this instrument in an environment in which the operating temperature is between 0 and 40 C and the humidity is between 30 and 70 RH with no condensation Use this instrument at a site with a minimum amount of dust oil and oil mist and which is not directly exposed to sunlight mw Precautions for Use Do not move the spindle quickly and do not apply an excessive load to the spindle laterally f this instrument receives a blow due to a drop etc check its performance and accuracy before use Confirm that the long pointer short pointer and spindle move smoothly AN Check the contact point and the screws on the back cover etc for looseness f this instrument is used at a site with a temperature variation frequently adjust the setting position CAUTION of the long pointer with a master gage The warranty will be voided if this product has been subject to repair disassembly or modification by the user or any third party E Maintenance Inspection Wipe dirt from the spindle sliding face with a dry cloth or a cloth dampened with a small amount of alcohol Never lubricate the spindle at this time Wipe dirt from the crystal cover with a soft and dry cloth or a cloth dampened with a small amount of neutral detergent Be sure to use only a neutral detergent Se performance deterioration of this instrument depends greatly on the operatin
3. g conditions It is recom Ypraes that the client prescribe the maintenance period taking the frequency of use environment usage d other conditions into account and inspect the instrument periodically E agpearance Specification c 19 9 ap Features D4 Elin clamp Code No 524 501 524 502 524 505 524 510 Limit hands Graduation o 0 001mm 0 002mm 00005 00002 Measurement 0 0 05mm 0 1mm 002 001 range Range rev 0 12mm 0 24mm 0048 0028 N Graduation 0 0 0 0 gt i 3 specifications 50 0 50 100 0 100 2 0 2 1 0 1 Spindle stroke About 3mm Repeatability 0 3um 0 5um 00001 00001 Accuracy t1um 1 5um 00005 00003 99 52 3 o Stem Spindle Retrace 0 5um 0 6um 00003 00003 Point Measuring 1 2N or less 3 Carbide ball No 901312 Mass 125g No 900032 Standard accessory Release 540774 e Optional accessory Lug back cover of metric model 131304 Optional accessory Lug back cover of inch model 131306 A number in parentheses indicates a dimension in inches or an order number mw Example of Usage As shown in the left figure mount this Hicator on a mounting tool such as a dial indicator stand Mount the Hicator by clamping the stem 9 8 or 9 52 Perform zero adjustment of the pointer using
Download Pdf Manuals
Related Search
Hicator history hysterectomy hickory farms hickory nc historic hector fort hickory tree hickory wood hickory tavern historical point hector rios hikatori ica tornet hector petrol