Basic-Check® User Manual - Medical Technologies International
Contents
1. any liquid Avoid placing the control unit in any area where it might come in contact with body fluids Damage by fluids voids the warranty Internal maintenance should be performed by qualified personnel only Bending or folding the Sensormat may cause loss of effective operation Batter y NOTE The Basic Check control unit includes an alkaline battery A low battery is indicated by a low constant beeping even while the patient is on the Sensormat DO NOT ATTEMPT TO RECHARGE THE BATTERY LIMITED WARRANTY BASIC CHECK CONTROL UNIT AND SENSORMAT 1 WARRANTOR This limited Warranty is given by Bed Check 1620 N 20th Cir Lincoln NE 68503 2 DURATION Basic Check Control Unit begins on date delivered to pur chaser and continues for a period of 2 years Sensormat begins on date delivered to purchaser and continues for the lesser of 1 year or as specified on the Sensormat label from the installation date 3 TO WHOM THIS WARRANTY IS GIVEN The limited warranty is given to the original purchaser of Bed Check products only 4 WHAT IS COVERED Defects in material and workmanship Warrantor makes no other warranties express or implied including merchantability or fit ness of product for a particular purpose 5 WHAT IS NOT COVERED A Any incidental indirect or consequential loss damage or expense that may result from any defect failure or malfunc tion B Any incidental indirect or co2. How the Basic Check System Can Work for You The Basic Check system consists of a control unit and a disposable pressure sensitive Sensormat When a patient s weight is removed from the Sensormat the control unit activates an alarm How to use the Basic Check System AWARNING A This monitor may not be compatible with mats manufactured by companies other than Bed Check Use of incompatible mats may result in injury or death 5 To silence the alarm simply press the red but ton on top of the control unit 6 Test the system daily for effective operation 7 System may not be effective for patients less than 100Ib Assure proper operation before put ting into service 8 Do not position either the unit or the Sensormat in such a manner that causes one to pull on the other causing stress to the connector wire or plug Care and Maintenance The control unit can be wiped with a damp cloth or sponge using mild detergents or sanitizing solutions Never use alcohol or strong chemical cleaners 1 Plug the Sensormat connector into the top of the control unit 2 Place the Sensormat so that it will be beneath the patient s buttocks 3 The control unit will automatically arm itself when weight is placed on the Sensormat 4 If the patient lifts his weight off the Sensormat the Basic Check will immediately alarm A CAUTIONA Never immerse the control unit in
3. ement of a component part includes free installation 7 RESPONSIBILITIES OF THE PURCHASER A Disinfect the product if necessary so that it is free of infectious matter B Ship the Sensormat unfolded C Use the product with reasonable care This limited warranty gives you specific legal rights You may also have other rights which vary from state to state Please call Bed Check immediately if you experience problems STANLEY By Bed Check D 1 800 523 7956 Mailing Address PO Box 80238 Lincoln NE 68501 0238 Shipping Address 1620 N 20th Cir Lincoln NE 68503 1103 ENA F Senior Technologies 2008 The Stanley Works All Rights Reserved Bed Check Basic Check and Sensormat are registered trademarks of Stanley Logistics Inc
4. nsequential loss damage or expense that may result from use of product with another manufacturer s product NOTE Some states do not allow the exclusion or limitation of incidental or conse quential damages C Any failure that may result from an accident purchaser s abuse neglect or failure to operate the product in accordance with the instruc tions provided herein D Any product which has the serial number altered defaced or removed E Any product which has been altered or modified with out the written consent of Bed Check 6 RESPONSIBILITIES OF WARRANTOR A In the event of a defect malfunction or other failure not caused by misuse or damage the warrantor will remedy the failure or defect without charge within a reasonable period of time The remedy will consist of repair replacement or refund at the warran tor s option If the product is no longer available warrantor will supply a comparable product or refund the purchase price at his option B If this product or one of its component parts contains a defect or malfunc Basic Check User Manual STANLEY D REDUCING THE RISK OF FALLS THROUGH INNOVATIVE TECHNOLOGY SINCE 1978 1 800 523 7956 www bedcheck com Bed Check 0163 439 B tion after a reasonable number of attempts by the warrantor to remedy the defects or malfunctions the purchaser will be entitled to either a refund or replacement of the product or its component part or parts Replac
Download Pdf Manuals
Related Search