"user manual"
Contents
1. Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION UN 2 1 Functions 2 1 1 Start up Procedure Before the crane can be switched on the correct voltage depending on the setting of the Voltage Selector Switch 110 220V must appear on the volt meter POWER IN Once the voltage has reached it s peak the START button can be pressed After pressing the START button screen 1 will appear It shows us that the system is trying to connect with the Motor and the Leveling Head axes Pantalla 1 If the Central Control Unit does not find one or both of these axes screen 2 will automatically appear and show us that there is a communication problem Pantalla 2 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION UN If the Central Control Unit finds all axes screen 3 will automatically appear and show us that the Leveling Head is searching the 0 or real horizon automatically the LEVELING HEHD Pantalla 3 Once the horizon has been reached screen 4 will automatically appear While the crane is switched on the Leveling Head will maintain this level If we have not selected Search Level YES the system will pass straight on to screen 4 The level at which the Leveling Head is will be m2. Set is pressed A first open bracket will appear in the menu Then the arm is moved to the second position where the second limit is wanted and Set is pressed again A second closed bracket and the option to clear just one of the limits will appear in the menu SCREEN 22 Pantalla 21 Pantalla 22 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 23 31 SERVICE VISION UN If the limit closest to the remote head is wanted to be erased the Clear button is pressed and if the limit closest to the crane is wanted to be erased press the Clear button If both of the limits are not set the system will not detect any limit and the arm will be able to move throughout the whole normal range When the systems is switched off the limits are lost 2 1 4 The Arc Compensator Arc Comp If the Arc Comp button is pressed Yes will appear next to Arc Comp and the Arc Compensator will be activated This feature compensates for the arc generated when both the Pan and or Tilt are moved The compensation is automatic works in any arm position and does not effect the normal operation of the arm Once the Arc Compensator has been activated Yes will appear next to Arc Comp Screen 23 The arm will telescope by it s self correcting the arc generated by the Pan and or Tilt movement The Tilt compensation limit depends on the arm length and the Pan c
3. 16 B4 PAN CRANE Yellow 3 RX Brown 15 A PAN CRANE Black 2 TX Red 14 A PAN CRANE Red r 26 2 e Hand command s connector e NEUTRIK 7pins panel female NC7FP1 1 Red VCC 5 2 Black GND 3 Blue COMMAND 4 Yellow SPEED 5 Orange GREEN SWITCH GND 6 Grey GND 7 Purple RELAY RED SWITCH SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION AS AC Output Scoprio Head for power supply BURNDY 4 pins female panel UT100 104ST 12V Output for monitor NEUTRIK 4 pins female panel NC4 FP1 Dynamic Counterweight System Cable BRUNDY 8 pins female panel UTGO 1285 EB 001 2 15A Leveling Head Cable BRUNDY 8 pins female panel UTGO 128S Connector AC 110V a 240V 16A Input Tilt encoder LEMO 10 pin female panel EGG 2B 310 CYM Input Pan encoder LEMO 10 pin female panel EGG 2B 310 CYM Input wheel track encoder LEMO 10 pin female panel EGG 2B 310 CYM SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISIO ae N AC Output Scoprio Head for power supply BURNDY 4 pins female panel UT100 104ST 1 Blue VCC 220V 2 3 Yellow GND 220V 4 Yellow Green GROUND e 12V Output for mo
4. in the same direction Once the movement has been programmed the Activate button is pressed and the system will follow the program Next to Activate Yes will appear meaning that the crane is being moved by the program Screen 29 np ienerator Pantalla 29 SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 27 SERVICE VISION AS If the program is activated at a point where the arm position does not co inside with a preprogrammed encoder angle 30 will appear on the screen This means that the arm is moving slowly to the position that co insides with the preprogrammed encoder angle Pantalla 30 Once the Motion Generator has been activated the telescopic arm will respond automatically to the angular movement of the Pan Tilt To deactivate the program the Activate button is pressed and No will appear next to Activate If the Motion Generation screen is exited the program is automatically deactivated for security reasons 2 1 7 Sequential Limits STOP SEQUENCE This feature allows for the programation of sequential crane arm limits By pressing the Stop Seq button screen 31 is accessed Pantalla 31 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 og 31 comercial servicevision
5. 3 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 34
6. 34 93 223 86 30 Fax 34 93 223 86 55 31 comercial servicevision es www servicevision es SERVICE VISION PAS Pantalla 26 To start off using the Pan Tilt button the Pan or Tilt encoder is selected as the one who will generate the arm movement The one that is seen on the screen Pan Tilt is the one that will be used as the reference Screen 26 27 Pantalla 26 Pantalla 27 Next the Reset button is pressed to reset all previously programmed points The 0 next to the word Points must be checked to make sure that the points memory has been erased Screen 26 otarting from the first position and having in mind that the movement must only be in one direction the first point is programmed To program points the Insert button is pressed lt is know that the point has been programmed by the 1 that will appear next to the word Points Screen 28 SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 26 31 SERVICE VISION eN Pantalla 28 The Crane Arm is paned or tilted and the telescopic arm moved again until the second position Insert is pressed again to program the point and a 2 will appear This process is carried out until we reach the end position of the move The more points that are programmed the better the crane arm movement will be Not like the angular movement of the arm the telescopic does not have to be
7. SERVICE VISION AS SCORPIO 30 User s manual SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION PAS INDEX 1 Description 2 The Electronic Control Box 2 1 Functions 2 1 1 Start up Prodecure 2 1 2 Settings Settings 2 1 3 L mits Limits 2 1 4 The Arc Compensator Arc Comp 2 1 5 Dynamic Counter Weight System Generator CWE Gen 2 1 6 Motion Generator MOTION GENERATOR 2 1 7 Sequential Limits STOP SEQUENCE 2 2 Hand command 3 Leveling Head SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION UN 1 Description The SCORPIO 30 is a 9 meter 30 foot telescopic crane lt has a telescopic arm range of 7 meters 21 foot The crane arm is made of aluminium lt has 4 steel guides and two independent cables per tube This provides smoother and quieter movement It has an electronic box which gives enough power to run the crane with a maximum controlled speed of 1 2m s Added features are adjustable damping electronic arm limits an arc compensator a motion generator output encoder information crane arm length and height a stop sequence program and other information on a display screen It has
8. a levelling head which is mounted at the end of the telescopic arm The levelling head maintains the horizon in all positions for the Remote Camera Head Techincal especifications Weight 840 kg 1851 88 Ib Max weight 1500 kg 3306 93 Ib Max payload underslung 70 kg 154 3 Ib Max payload overslung 30kg 66 1 Ib Max speed 1 2 m s Arm lenght 9m 30 ft Telescopic range 7m 21 ft SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION UN 11 58m 38 9 14m 30 24m 7 10 225m 7 4 10m 32 9 o u eN lt MIN 2m 6 6 16m 5 3 4 65m 15 3 Crane weight 840 kg 1851 88lb e Max weight 1500kg 3306 93Ib e Max Payload in underslung 70kg 154 3lb e Max Payload in overslung 30kg 66 16lb SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION AS 2 The Electronic Control Box The SCORPIO 30 is controlled by an Electronic Control Box The Electronic Control Box controls and drives the crane s motor which in turn moves the telescopic crane arm lt also controls other special features which puts the SCORPIO 30 apart from the other
9. an correct until 4 50 and 50 from it s 0 The crane makes it s own 0 on both the Pan and Tilt when you switch on the crane When the Arc Compensator is activated the Motion Generator and Limits disappear Meter 5 88 degree 2 15 detree ia 665 Meter SPEEI DAMP Pantalla 23 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 24 SERVICE VISION eN 2 1 5 Dynamic Counter Weight System Generator CWE Gen If the CWE Gen button is pressed Yes Screen 24 will appear next to CWE Gen and the CWE Generator will be activated The CWE Generator will move the Dynamic Counter Weights in accordance with the preprogrammed points at the preprogrammed arm lengths in the display CWE Adj from Settings If the CWE Generator is not activated Enable No in the CWE Adj screen this button will not appear screen 25 ARM Bris PRN DAMP MOTION GENERATOR Pantalla 24 Pantalla 25 2 1 6 Motion Generator MOTION GENERATOR This feature lets us do an arm motion generation depending on the position of the Pan or Tilt encoder If the Mo Gen button is pressed screen 26 will appear In this menu the points can be programmed and the program can be activated SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel
10. ce is found and then the Point is programmed To Program the Point the Add Point button is pressed Screen 11B This process is repeated throughout the whole range of the Crane Arm Pantalla 11B Pantalla 11C SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 SERVICE VISION eN This program is activated from the Principle Menu By pressing the Back button the system returns to the Settings menu By pressing the Search Level button the horizon is set manually No or automatically Yes If Yes appears next to Search Level the Leveling Head will automatically search the real horizon If No appears the horizon can be manually set by the operator This case is used for if a off set on the horizon is wanted and as a back up for if something goes wrong with the automatic leveling mits Meters read osi or Under Pantalla 12 By pressing the Pan Rest button the Pan degree counter in the Principal Menu Screen 6 will be reset and will start from zero This function is used to reset the O degrees of the Crane Arm pan axis PANTALLA 6 By pressing the Aux button twice the Aux menu is accessed This menu is used to verify and adjust the electronic system Once pressed screen 12 will appear Pantalla 13 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain T
11. el 34 93 223 86 30 Fax 34 93 223 86 18 31 comercial servicevision es www servicevision es SERVICE VISION UN By pressing the Test AD button the Analog to Digital Converter menu is accessed Once pressed screen 14 will appear In this menu the Analog to Digital Converters of the Central Control Unit can be checked With this information the functionality of each potentiometer within the system can be checked and a problem can be distinguished to be a potentiometer or another part of the system Pantalla 14 By pressing the Bus Connections button the Bus Connections menu is accessed Once pressed screen 15 will appear In this screen the connected circuit boards and the software versions and their release dates can be seen In this display we can detect what axis are connected and we can verify the version of the software they have The most important one is the axis CONTROL who determinate the version of the software of the crane This is the number that changes when we upgrade the software of the crane it Conneot on BALE CRANE 3 48 SERIO 1 12 SERUO M P SERUD 1 13 Pantalla 15 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION UN By pressing the Command Adjust button the Command Adjust menu is accessed Once pressed screen 16 will appear In
12. emorized and will be kept while the crane is switched on In the case where the Leveling Head is not connected or there is a problem in the system the screen will stay in screen 3 until the ESC button is pressed In this case the Leveling Head will not work Pantalla 4 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 T 31 comercial servicevision es www servicevision es SERVICE VISION UN Screen 4 only appears for a couple of seconds lt shows us which axes are connected Axis 1 is the Arm Motor axis 2 is the Leveling Head and axis three is Dynamic Counter Weight System After a few seconds screen 5 will appear This screen tells us that the crane is moving with limited speed and that we must make one of the electronic limits The crane has a Front Limit and a Back Limit It does not matter which one we make The crane needs to make a limit to be able to calculate where the Crane Arm is The crane must be moved with the Hand Unit until it makes one of the limits SCORPIO 23 CRANE SETTINGS The arm is moving with limited sPeed TERT Search the Physical limit Pantalla 5 Once the limit has been made screen 6 will appear MOT LON TOF JENERATOR SEQUENCE Pantalla 6 SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 co
13. ervicevision es 32 SERVICE VISION AS 3 Leveling Head The SCORPIO 30 has a Leveling Head that will maintain the Real Horizon or a set horizon depending on the setting in the Settings menu This leveling head can work in two positions Over Slung and Under Slung For these functions to work correctly they must be set in the Settings menu The Leveling Head is fastened to the Crane Arm with six bolts which must all be present at all times Three go on one side and the other three on the other The Leveling Head Fastening Plate is bolted with four bolts to the last of the telescopic tubes This fastening plate has four holes with slight play to allow for adjustment of the Leveling Head horizon Tercer tubo Soporte Nivelador de Cabeza Tornillos de sujeci n SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 33 SERVICE VISION PAS To invert the Leveling Head the six bolts are removed and the Leveling Head inverted The Leveling Head cable must be connected and the LEDs must turn green The maximum weight that can be mounted on the Leveling Head is 70 kilograms in the Under Slung position and 30 in the Over Slung position This includes the remote head and the camera package SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 9
14. es www servicevision es SERVICE VISION eN Before starting the program the Reset button must be pressed and it must be checked that there is a 0 next to the word Points Starting from the Crane Arm s shortest length the arm is moved to the first Stop and the Insert button is pressed A 1 will appear on the screen where the 0 was Screen 32 This process is repeated until all the Stops have been inserted The Stops must be programmed in one direction only It is not possible to change direction while programming stops Pantalla 32 Once all the stops have been programmed the Crane Arm is brought back to it s closed position and the Activate button is pressed Next to Activate Yes must appear indicating that the program is active Once the program has been activated the Insert button will disappear and the word Point with a 1 next to it will appear Even if more than one Stops has been programmed the 1 shows that the Stop Sequence is working between the normal closed position and the first programmed Stop Screen 33 Pantalla 33 SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 29 SERVICE VISION UN The arm can now be telescoped between these to points When the second stop is wanted to be reached the Green button on the Hand U
15. h can be programmed This is used to generate a movement of the Counter Weight Carriage in order to balance the Crane Arm In this menu the CWE is activated or deactivated The points that we have programmed with the Add Point button the Crane Arm length and the position of the CWE expressed in percentage can be seen Pantalla 10 SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION UN By pressing the Enable button the CWE is activated or deactivated If YES appears next to Enable the Electronic Control Box will let the CWE be controlled by the Program that the operator programs If NO appears next to Enable the system will not let the CWE be controlled by the program and no automatic motion will be generated However the Dynamic Counter Weight Carriage can still be moved by pressing the Green button and the Tight Wide potentiometer at the same time In this case screen 11 will appear Pantalla 1 1 When ever a new CWE motion is programmed the previous program must be erased To erase the previous program the Reset Point button is pressed To program the CWE the arm must start from it s shortest length By pressing the Green Button on the Hand Unit and the Tight Wide Potentiometer at the same time the CWE is moved The CWE is moved until the perfect balan
16. mercial servicevision es www servicevision es SERVICE VISION UN This is the Principal Menu The different features buttons and system information appear in this screen The following system information appears The type on crane being used SCORPIO 30 e The length of the crane arm in meters or feet from the center of rotation he position of the Dynamic Counter Weight System CWE in percentage e The PAN axis angle with respect to where the Crane Arm was when the system was switched on or from where the Crane Arm was when the Pan Rest from the Settings menu was pressed e The TILT axis angle with respect to the horizon e The height of the camera fixation plate with respect to the central rotation of the Tilt e The Arm Movement Speed from 0 100 If the Speed setting is below 5 Very Slow SCREEN 7 appears where the numbers normally are so that it is not thought that the crane is not working e The Damping level from 0 very hard to 100 very soft This is how soft or hard the Crane Arm slows down This setting does not effect the Programmable Limits or Final Arm Limit ramps Pantalla 7 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 ia 31 comercial servicevision es www servicevision es SERVICE VISION UN From screen 6 the rest of the special functions menus and settings can be accessed 2 1 2 Setting
17. nit is pressed and a 2 will appear next to the word Point Now the arm can be telescoped between the closed position and the second programmed Stop Screen 34 Pantalla 34 This process is repeated to change from Stop to Stop until the last programmed Stop When the first Stop is wanted as the limit the Initial Stop button is pressed and the program goes back to the first programmed Stop 1 Screen 33 To deactivate the program the Activate button is pressed and a No must appear next to Activate If this menu is exited the program will be deactivated automatically for security reasons SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 30 SERVICE VISION AS 2 2 Hand command Green Selections Red Emergency button button Potenciometer SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 31 SERVICE VISION PAS Hand command s connector Speed control NEUTRIK 7 pins male panel NC7 MD LX 1 Red 2 Black 3 Blue 4 Yellow 5 Brown 6 Green 7 Orange SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www s
18. nitor NEUTRIK 4 pins female panel NC4 FP1 1 Black GND 2 3 4 Red VCC 12V e Dynamic Counterweight System Cable BRUNDY 8 pins female panel UTGO 1285 EB 001 2 1 Red CVV 28V 2 Black GND 3 Green LEVEL A1 OUT 4 Blue LEVEL A1 OUT 5 Grey 485 6 Blue 485 7 White LEVEL B1 OUT 8 Brown LEVEL B1 OUT Leveling Head Cable BRUNDY 8 pins female panel UTGO 1285 1 Red CVV 28V 2 Black GND 3 Green LEVEL A1 OUT 4 Blue LEVEL A1 OUT 5 Grey 485 6 Blue 485 7 White LEVEL B1 OUT 8 Brown LEVEL B1 OUT SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISIO X N e Input Tilt encoder LEMO 10 pin female panel EGG 2B 310 CYM 1 Red VCC 2 Black GND 3 Green ENC A 4 Blue ENC A 5 White ENC B 6 Brown ENC B yam 8 9 10 Input Pan encoder LEMO 10 pin Female panel EGG 2B 310 CYM 1 Red VCC 2 Black GND 3 Green ENC A 4 Blue ENC A 5 White ENC B 6 Brown ENC B ray 8 9 10 Input wheel track encoder LEMO 10 pin Female panel EGG 2B 310 CYM 1 Red VCC 2 Black GND 3 Green ENC A4 4 Blue ENC A 5 White ENC B 6 Brown ENC B 7 8 9 1 O SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain
19. problem can be distinguished to be an encoder or another part of the system thus helping the technician trouble shoot Pantalla 18 By pressing the Level Adjust button the Level Adjust menu is accessed Once pressed screen 19B will appear This menu is the most delicate and thus the button must be pressed three times to gain access In this menu the Leveling Head adjustments are made Pantalla 19 If the Leveling Head is not connected or there is a problem with the communication or cables screen 19C will appear This screen tells us that there is a communication problem SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 21 SERVICE VISION UN Pantalla 19B Pantalla 19C Pantalla 19D SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es 22 SERVICE VISION PAS 2 1 3 Limits Limits By pressing the Limits button the Limits menu is accessed Once pressed screen 20 will appear In this menu two electronic arm length limits can be set Pantalla 20 Before setting the limits Clear AI must be pressed to clear all previous limits Now the crane arm is moved to the first position where the first limit is wanted and
20. s Settings From this menu all the system configuration tools can be accessed By pressing the Settings button in the principle menu the Settings Menu is accessed Once pressed screen 8 will appear Pantalla 8 By pressing the Units button the unit for measurement is changed If Meters appears next to Units the measurements will be in meters If Feet appears next to Units the measurements will be in feet Pantalla 9 SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION UN By pressing the Head Position button the position of the remote head with respect to the Crane Arm is selected If Under Slung appears next to Head Position it means that the remote head must be mounted below the Camera Fixation Plate If Over Slung appears next to Head Position it means that the remote head must be mounted above the Camera Fixation Plate This setting effects the way in which the Leveling Plate of the Leveling Head maintains the horizon lo change this setting the crane must be switched off on for it to register the change Pantalla 9B By pressing the CWE Adj button the Dynamic Counter Weight Adjustment Menu is accessed Once pressed screen 10 will appear In this menu different Counter Weight Carriage positions in relation to the Crane Arm lengt
21. telescopic cranes lt serves as the Central Control Unit for the Leveling Head and the Dynamic Counter Weight System It reads all the encoder information from all the cranes axes so that it can later be used by external systems The Electronic Control Box has a screen which is the interface between the user and the SCORPIO 30 Start button Power In swich Driver s LED Display Power In Stop Servo s LED Selection s display emergency button Fan Fan SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISION AS Motor s connector Encoder output s connector D connector 25 female DB 25S A191 A1977 Hand command s connector NEUTRIK 7pins panel female NC7FP1 SERVICEVISION BIS SL i R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 31 comercial servicevision es www servicevision es SERVICE VISIO ae N Encoder output s connector D connector 25 female DB 25S A191 A1977 13 B ARM Brown 25 B TRACK CRANE Brown 12 B ARM White 24 B TRACK CRANE White 11 A ARM Blue 23 A TRACK CRANE Blue 10 A ARM Green 22 A TRACK CRANE Green 9 uM 21 B TILT CRANE Brown 8 20 B TILT CRANE White 7 GND Green 19 A TILT CRANE Blue 6 SS 18 A TILT CRANE Green 5 ai 17 B PAN CRANE Orange 4
22. this screen adjustments can be made to the Tight Wide potentiometer zero window on the Hand Unit An automatic zero can also be recalibrated on the Tight Wide potentiometer for if there were any interference effecting it Pantalla 16 By pressing the Zero Drift button the system sets an automatic zero on the Tight Wide potentiometer The system does an automatic re zero on the Tight Wide Potentiometer by it s self for if there were any interference effecting it but it can also be done manually from this menu by pressing Zero Drift By pressing the Window Adjust button the Window Adjust menu is accessed Once pressed screen 17 will appear If the response of the Tight Wide potentiometer seems to fast or to slow it can be adjusted by entering into this menu By pressing button the zero window will be maximized and by pressing the button the window will be minimized Pantalla 17 SERVICEVISION BIS SL R os Rosas 20 08940 CORNELLA DE LLOBREGAT Barcelona Spain Tel 34 93 223 86 30 Fax 34 93 223 86 20 31 comercial servicevision es www servicevision es SERVICE VISION UN By pressing the Encoders button the Encodes menu is accessed Once pressed screen 18 will appear In this menu the encoders that read the Pan Tilt and Travelling are verified If the numbers do not change from zero it means that the system is not receiving a signal from the respective encoder With this information a
Download Pdf Manuals
Related Search