REC button
Contents
1. 15 Software guide 1 Software Installation 16 2 LOQ N 19 3 Description of Software Screen 19 4 Function and Description of Button 20 5 Description of Data Information Display 30 6 How to download and play data 31 7 Acceleration data interpretation method 33 8 Impact assessment graph 34 9 Description of DT Mode Window 34 Installation guide 1 Caution during installation 35 2 MOUNUING EE EE RE EE EE eee eee ena 36 3 MOUNUNG SOCIO EE EE EE 37 4 Wiring Guide 39 Before suspecting malfunction 40 Product specs and operation environment 41 Warranty policy 42 Product guide uct guide 1 Caution during use This guide ensures user s safety and helps to use the product properly Read carefully and use carefully 1 Do not separate f2. y O y tS gt e tj e N Time IMPACT data graph 9 Description of DT Mode Window When you open a file on DT mode driving records are displayed by date on the top left corner of the window Driving Distance indicates daily driving distance and Driving Time displays actual driving time travelling time In addition Overspeed Time indicates driving time at higher speed than standard speed set by user setup 34 Installation guide 1 Caution during installation x Prior to installation check whether contents of the product are included and mount according to the set procedure after understanding the contents of the installation guide 1 During product installation even when the lever of transmission is set for the N level it is necessary to mount on the ground surface on a perpendicular manner at a flat place where the vehicle does not move to either front or rear 2 Select location for mounting that does not block driver s view at the mirror located in front of the vehicle 3 When main body is mounted check whether location is one that does not limit the room mirrors movement and select a location that is not intervened even when room mirror is maneuvered 4 Clean the mirror at the location where adhesion will take place by using dry cloth prior to attaching onto vehicle 5 When installing vehicle install so that other safety devices in the vehicle are not affected 6 When vehicles
3. id tS s da Gen ie N y 0 y So 6 Ss e H N Driving Record Playing Speed Setup DT playing speed setup This is the function that sets up the speed to increase decrease speed of play on the DT mode Increases speed up to 4 compact disk access time to x 1 gt x2 gt x3 gt x 4 when is pressed on Decreases speed up to 4 compact disk access time to x 1 gt x 1 2 gt x 1 3 x 1 4 when is pressed on This function operates only when play button is pressed on 29 5 Description of Data Information Display To display recording time of the current image frame 7 To display maximum impact of the current file only under VEDR sm display mode To display latitude out of location information for the current N image frame ss To display longitude out of location information for the current image frame iyi To display production information of the current file To display vehicle number of the current file only when it is registered with user setup y O g d 6 gt e Gen ie N To display driver name of the current file only when it is registered il with user setup To display management number of the current file only when it is registered with user setup To display start and end dates of driving of the current file only under DT mode 30 y Le g tS 6 gt e Gan N 6 How to download and pla
4. re w 6 dad u 1 Eliminate the sticker located at the rear of the mount and attach onto desired location 2 Fit in the power cable onto the attached mount 39 Before suspecting malfunction EEE 1 When image cannot be recorded 1 1 Check whether there is SD Card in the main body 1 2 Check whether it is SD Card provided by our company Ordinary SD Card may not record 1 3 recording may have failed due to the failed impact detection depending on the acceleration impact level Caution In this case image is recorded using the moment when the manual recording button was pressed on as the standard 2 Recorded image may not display everything depending on the distance with the number plate of the vehicle in front lighting and vehicles speed 3 Placing bright object or object that emit light in front of the vehicle s front glass makes it difficult to see as the object may reflect against the glass especially at night 4 GPS signal may not be received due to the blocking of the signal at underground parking lot tunnel and skyscrapers and valleys and large trees 5 In case audio is not stored please conform if audio storage button is checked on the software program 6 When the quality of image is not good Check whether main body s lens is contaminated and clean with cloth for eyeglasses 7 When the image is faced excessively towards the sky or the ground Check whether main body is facin
5. y O id tS gt e Gen ie N Notice When OK button is pressed while only folder is designated as shown on the above screen all the data files in the folder are searched to indicate on the database screen on the right Possible to search up to 10 000 1 To search by date designate the start and ending date on the date dialog box and check on the box on the left side and then press on the OK button Check on one box to search with one date alone In the DT Mode search is conducted with the day when driving started as a standard 2 To search by impact value input minimum and maximum values and then check the box on the left pressing the OK button afterwards Input one value to search with only one impact value Use only on the VEDR Mode while it is meaningless in the DT Mode 3 To search by impact speed value input minimum and maximum values Then check the box on the left and press on the OK button Input one value if you wish to search with only one impact speed value Use only on the VEDR Mode while it is meaningless in the DT Mode 4 Car number driver name and management number can select saved value with User setup Press on the OK button after checking the box on the left 5 All conditions can be searched with AND conditions 21 3 SD Card Open It lists all of images within SD Card Event Record DIT Data 09 04 18 09 04 23 4 File Open Function to open file t
6. 6 Ss da Gan N Environment Settings that enable Management Settings and environment setup that makes it possible to manage with vehicle number driver s name and management number when it comes to each serial number After vehicle number is registered it is downloaded to the vehicle number folder when it comes to the setup serial number and it is downloaded to the serial number folder when it comes to the serial number that is not setup 25 Management Settings How to input Management Settings 1 Click on the Add button after inputting Serial No Car No Driver Name and Management No At this time at least one value among serial number vehicle number driver s name and management number must be input 2 Press on the saving button after confirming that the value is added onto the list How to delete setup Management Settings 1 Click on the serial number to delete setup value on the list 2 Click on the Delete button 3 Click on the Save button after verifying deletion from the list Environment Settings Speed setup KPH is selected when the unit of vehicle s speed is km h and MPH in the case of mile h Google Map ON OFF Select OFF when Google Map is not used Map usage Count does not increase from the subsequent execution when FFE is selected Reload last work at startup Check Reload last work at startup and press on the saving button Then if software is executed again after sof
7. EPSON ecTrans AP Foobar Hada InstallShield ir eet Mead amp Company Blah salf y O g ha gt dal t o N Select shortcuts Select additional shortcuts Select any additional shortcuts For Raadscan Pro that vou would like created by the installation Create a Desktop icon 17 8 When a screen is displayed as below press Install button Ready to Install Setup is now ready to begin installing Roadscan Pa on your computer Click Install to continue with the installation or click Back if you want to review or change any settings l Destination Folder CWProgram Files WRoadscan Pro Start Menu Folder Roadscan Pra Additional shortcuts Create a Desktop icon Dopyrignt 2009 Alirinhts reserved 9 When program installation is completed a screen is displayed as below Press Finish button to end installation id Le U Ss da tan N Completing the Roadscan Pro Setup Wizard Roadscan Pro has been installed on your computer Click Finish to close this wizard 18 y O id ES 6 gt d Gen ie N 2 Login In order to use Google Map it is required to enter provided ID and Password Use 6 character ID code not email address Use 6 character PW code TE abe AL AE ss j 1 Menu Button It includes functions such as File View Download Device
8. Setup etc 2 Display Window It displays images of Event data or DT data 3 Google Map It shows location information of data via Google Map 4 File List Window lt displays a list of searched files or directly opened files 5 Graph Display window It displays acceleration data impact data and speed data in sequence 6 Driving Information Display Window It displays time information location information acceleration information driver information etc of data 7 Progress Bar It displays progressing rate when executing download or other functions 19 4 Function and Description of Button 1 Mode Change It allows displaying VEDR data and DT data alternately When you press the button display mode changes to VEDR display mode and DT display mode alternatively At the moment shape of button is also changed Button for VEDR Display Mode b ME 2 Search Open T7 Function that opens file by leveraging search function The following screen appears when the Search Button is clicked on Search ti Sets up the search folder Screen where user can select folder is indicated when the button is pressed on y O id ES gt d t o N From 2009 04 28 Tue Ta 2009 04 28 Tue Search condition for recorded date KAl234 _ Driver Name OZUSANG ka u Search condition for user setup values Management No EINA 20
9. on and off in order Continuous Beep Short SD CARD blinks Recording In storing _ SD CARD blinks Completed Beep Short SD CARD turned on Rent ing Start storage Beep Beep SD CARD blinks __ Recording Start storage p P SD CARD blinks LED Functions ony In storing SD CARD blinks _ blinks when Continuous Recording isoff Completed Beep Long ISD CARD turned on fast REC After pressing Beep Beep SD CARD blinks After Externa button pressing Switch REC meters ong In storing SD CARDblinks Button Recording is off Completed Beep Long SD CARD turned on a Download Start Beep Short SD CARD blinks Flash In download a SD CARD blinks Memory gt ing SD Card Functions by Down Beep Beep SD CARD turned on pressing the FN button for Completed 3 seconds Product guide 14 y 0 dal J ge O 9 Product Upgrade This product may be subject to change of software in the future for the purpose of performance improvement etc Upgrade can be supported through websites of manufacturer and seller and upgrade and installation should be executed by the user personally in principle If you want to receive update through visit please use the customers center of the manufacturer or seller How to upgrade the product 1 Connect SD Card to PC 2 Copy update file bin on the website to root of SD Card 3 Insert SD Card to the product and power it on upgrade i
10. My Driving Recorder gt VEDR Video Event Data Recorder gt Continuous Recording gt DT Digital Tachometer This product is the VEDR system for vehicles We do not take responsibility for the malfunction and accident caused by inappropriate use mounting and alteration Please check purchase date store on the warranty certificate and obtain the certificate from the save Read this user manual and warranty certificate thoroughly to use it correctly and keep it well to read if and when needed gt Software provided by this product is designed to operate on the PC with Windows XP Vista installed gt There may be some difference in the product information provided in this manual and the actual product depending on the subsequent update Table of contents Product guide 1 Caution during Use A 2 Verification of components 6 3 Names of each part 7 A VEDR function ae g 5 Continuous Recording Function 10 6D T FONC UON EE EE EE EE EE 11 7 Button s function 12 8 Guide on LED Display and Buzzer Sound 13 9 Product Upgrade aeaee 15 10 Google Map Use
11. ages for 12 hours with high resolution or 25 hours with medium resolution See software guideline Saved data may be confirmed using software accompanied with SD Card 10 y e2 dad J ge O y e2 J ge da O 6 DT Function DT function is to store route time and speed during driving of the vehicle DT data can be downloaded to SD Card by pressing FN button for 3seconds Recording Time Total recording time of DT is about 30 days when driving for 24 hours a day Afterward the oldest data is deleted Speed Location Time Recording This product stores speed location and time every 10 seconds when it is connected to GPS Speed It shows speed as a graph via speed window so as to allow more accurate analysis of driving record In addition it displays speed on the car speed meter panel to allow easy analysis Location It shows latitude and longitude as numbers equivalently but graph display depends on use of Google Map When driving route display is enabled It connects to Google Map to display the current location on Google Map and when DT data is played it displays changing location over time At that moment Google Map can be expanded or reduced When driving route display is not enabled It displays the entire route as a line LI 7 Button s function REC button It is possible to record image manually by using REC Record button Press on
12. ce VEDR mode starts By pressing FN button again the VEDR mode stops and the Continuous Recording mode re starts If no SD card is installed the Roadscan enters automatically the VEDR mode Continuous Recording mode is disabled Event Recording When impact is felt by the vehicle this device detects the shock automatically and records the image on a real time basis before 15sec after 15 sec an accident At the same time the device records information related to time and vehicle s 3 axis acceleration data GPS location information and speed information etc Impact results in case of vehicle accident sudden braking sudden curve irregular road surface and impact to the main body and it is possible to adjust impact level When the impact level is low recording takes place frequently as the device detects even the minor braking Storing does not take place often when the impact level is high but this in turn may not record minor collision Saved accident data are stored into the internal Flash Memory and downloaded to SD Card for about 10 seconds After data download accident images are preserved within the internal Flash Memory as it is If SD Card is not inserted and data are stored in the internal Memory you can insert SD Card and press FN button for 3 seconds to all of contents of Flash Memory to SD Card J e2 da J ge O Manual recording function This is the function that records image r
13. e angle so that it becomes perpendicular to the ground surface to complete the mounting Step 1 Take out the cover of the two sided tape attached on the main body Step 2 Place the main body at the vehicles center Step 3 Press button front rear angle so that the main body mounted on the front glass to be right angle Step 4 When adjustment is completed release the button to check if it is fixed Step 5 Connect power with power cable Step 6 Connect External Switch It is possible to use External Switch to save Event Data on emergency Attach External Switch on the desired location Step 7 When Beep Beep Beep short sound sounds after connecting power POWER SD CARD and GPS LEDs turn on for 20 seconds and SD Card LED blinks mounting is normally completed GPS LED may blinks for the time being according to ambient situation x Please be care about Room Mirror of Notice User can connect Secret emergency button with Roadscan Pro by cabling as below RED WHITE IIED RED BLACK TM 4 BLACK FUNTION CABLE FUNTION CABLE eve RD SWITCH WHITE SWITCH RED Trigger Trigger GND BLACK GND BLACK y 0 en Q re L 6 u 38 4 Wiring Guide This product supplies power by connecting to the vehicle with power cable To arrange power cable it is possible to use the mount that is provided to arrange the power cable xX How to use the mount y 0
14. egardless of impact level Press on the REC button located at the back of the main body to record image of setup before after time acceleration and GPS location speed information Using this function when image is not recorded due to minor collision enables you to record the data When you press External Switch it has the same effect y e2 dad WJ ge O Stable image storing function using back up power In the case of large accident there is a potential that power will be severed However accident image is saved safely even when power is severed thanks to the built in back up power located in the main body At this time however image is recorded up to the point when power is severed for safe image of accident storing and does not record data afterwards Moreover frames per second of the image may be lower than the normal frames per second Recording function that uses built in Flash Memory It stores data that occurs due to impact and GPS data to be used for DT using internal Flash Memory regardless to SD Card This product stores images and data up to 60 times for 15 seconds before and after an accident total 30 seconds to allow check image data using Manager Program mounted on SD Card If any accident occurs after 60 times of accident images are stored the oldest data is deleted and new image is stored in the place Correct Use of SD Card Be sure to insert SD Card first before applying pow
15. er to the main body In addition be sure to pull out SD Card when power LED is turned off after power is off If you insert or pull out SD Card during operation of main body file system may be damaged If you want to use other SD Card than the one provided when purchasing the product be sure to use recommended SD Card for normal operation Capacity of SD Card Minimum available SD Card is 2G SD Card of which 1G byte is used for copying internal Flash Memory only Image and Vehicle Data Analysis Function It is possible to analyze image and data at that time using provided VEDR software VEDR Impact Level It is possible to set up impact level at which the product recognizes that itis an Event Stored data are identified and managed as 3 types according to Impact Value that is applied to the vehicle Normal Impact Critical Impact Recording upon REC button and External Switch Recording Recording upon Recording upon When user presses Pattern traffic accident large impact REC button or External and radical driving Switch upon necessity Impact 0 1G 1 9G 1G 2G Level Setup Range Initial 0 7G 1 1 G Impact Level Overwritten Not overwritten To manage as same as Normal Impact 5 Continuous Recording Function When the product is powered on it starts Continuous Recording automatically after 20 seconds and when FN button is pressed it stops Continuous Recording function It may use up to 16G SD Card that saves im
16. ft side of the data that you want to download among the saved data Press on the OK button on the dialog box after checking 6 Print prints the current screen as IS 23 l Cancel 7 Device Setup Device Setup Impact Level of G Impact Level of G Critical Voice Record set video Quality Voice Record Quality v It stores settings of the device into SD Card It allows setting up Impact Level resolution audio storage etc Impact Level If the product receives impact value larger than the impact level setting it stores data automatically If you want to record the image data less frequently select higher value of G It is possible to setup impact level by each X Y Z axes Impact level is saved when the OK button is clicked on after moving the bar to the desired number X axis gt vehicle s front and rear direction Y axis gt vehicle s left and right direction Z axis gt vehicle s upper and lower direction Voice Recording Audio Storage function may be turned On Off If you do not want audio storage please release Voice Recording On Off check box 24 id Le g tS 6 Ss dad Gan N Managen Geftnys Ed serial Ho NEO niie GE Car Ma T N Drover Here bela na are ri Sana Ka ar ble HE zier HED ST agent in HEG GIA TEIT Eirene Se ge Sed Goese Man BFP H z fe Fend bal sik ak slan id 0 id S
17. g processing and distribution may be subjected to compensation for damage according to the civil law or to criminal punishment according to the Intellectual Property Right Protection and Management Law 16 Do not separate SD Card from main body when power is on and during data storing It may cause a fault Only insert or remove the SD Card when the Power is off 17 It might not be operated on some SD Cards Please purchase and use recommended SD Cards only 2 Verification of components Check to see whether all the components included in the following diagram are included 1 Main body 2 SD Card Including User Manual and Software 3 SD Card Reader 4 External Switch 5 Cable Mount Transcend gt y O dal J ge e As el Main body SD Card SD Card Reader k a External Switch Cable Mount 3 Names of each part Main body is comprised of the module that processes and assesses status on the camera current image and situation with the internal CPU gt gt Name of main body s each part is shown on the following diagram FoadScan Ei Camera lens U O pe 5 5 Front 2 a Head Fixing Button PoadScan 1 SD Card insertion part FN BUTTON LED REC BUTTON POWER SD CARD GPS MIC Rear 4 VEDR function NOTICE The VEDR mode is disabled during Continuous Recording mode To enter the VEDR mode user must press the FN button on
18. g vehicle s front part and adjust perpendicular to the ground surface 8 When main body s POWER LED is turned off 8 1 Check whether main body s power cable is connected properly 8 2 Pull out SD Card from the main body and power on or format SD Card and power on again 9 If you pull out SD Card in storage from carelessness the product may have an error but it can be used again by formatting SD Card 10 If there is no image on the software please contact the seller 40 Product specs and operation environment RoadScan PRO Normal operation voltage Minimum operation voltage Maximum operation voltage Maximum power consumption amount Operating temperature Preserving temperature Camera Type Maximum Camera Pixel Actual Camera Pixel Average number of images recorded Lowest intensity of illumination for operation Lens angle Image recording resolution GPS Size Weight 12V 24V 9V 32V 3W 20 degrees 70 degrees 40 degrees 85 degrees Color CMOS Camera 350K 320K 24 Frame second 1 lux 120 degrees 640 x 480 Installed in Main Body 91x88x40 mm 120g Minimum operation PC environment for Roadscan Pro Manager OS Windows XP Vista RAM 256 MB RAM HardDisk capacity 32MB At least CPU Pentium4 1 5GHz recommended 41 Warranty policy Warranty regulation 1 We fix your product for free when malfunction results even when the product was used normally within the warranty pe
19. hat can open various files all at once ii SD Card Data Created Date 09 04 03 09 04 03 09 04 03 09 04 03 09 04 03 09 04 03 09 04 03 09 04 03 Created Date 09 04 22 09 04 17 09 04 06 09 04 06 09 04 06 09 04 06 09 04 06 09 04 06 Created Time 12 30 09 12 37 36 1214003 12 30 29 12 55 57 lessee 12 34 48 2 34 15 maximum of 10 000 y O y a gt d t Oo N Software guide 5 Download This is the function that downloads main body s SD Card s data to a PC Use Card reader to download main body s data to a PC To download press on the download button while SD Card is connected to a PC and the following Dialog box appears Download Data Management Info Serial No NEO_O01 Car No 24 5676 Jacky Driver Name Management MOOI Event Record Created Date 09 04 03 09 04 03 09 04 03 09 04 03 09 04 03 RAAR REBRA Created Time 12 36 09 12 37 36 12 37 03 12 36 29 12 35 57 Type iS Normal Critical Button Critical Button amp Continuous Record Alt Select All Deselect All No Created Date md 09 04 22 inca v 02 09 04 17 fz v 03 09 04 06 E 04 09 04 06 05 09 04 06 lt il Created Time A 10 44 02 14 17 22 13 11 33 13 10 56 13 10 21 Select All Deselect All DIT Data F Download DIT data Check on the check box on the le
20. ix or alter Accident may result due to abnormal operation and user may not be entitled to free service if and when product malfunction is caused by user s fault 2 Do not spray water directly to clean up the vehicle s interior This may cause the product to malfunction and cause fire and electric shock Avoid contact with chemicals or cleansers since they may alter the surface damaging the interior of the device 3 Excessive shock or insertion of alien substance is prevented Excessive force shock or insertion of alien substance such as beverage may cause malfunction Thus be careful about this point 4 If and when alien substance or sticker present in front of the product s lens blocks the view image may not be filmed properly Therefore be cautious of cleanness at the front part of the main body clean Moreover other products placed near the product may be visible by reflecting against the mirror Therefore do not place other product near the installed product y e2 da J ge O 5 When installed for the first time device may not operate properly when the location is moved even when it operated normally Therefore mount sturdy during installation Do not move or shock the device by using excessive force after installation is completed 6 Image may be saved with different angle when the device s angle is changed due to long time use or when exposed to severe vibration when driving on dirt road Ad
21. just to the original angle while stopped on flat road 7 Be especially careful since watching the product or maneuvering it while driving may cause accident 8 Be careful to avoid excessive shock and contact with humidity and salinity and be careful since malfunction may result when product is subjected to pressure or shock after product mounting due to the twisting of the location y ie J ge an O 9 VEDR data may not be recorded during accident with lower than specific acceleration shock level Be careful of this point Refer to VEDR function 10 This product s VEDR data may not be effective in court Please be aware of this point 11 Product may be upgraded after launch to add on more functions and to increase customer convenience 12 Time is re set automatically depending on the GPS time information 13 The supplied SD Card has a limited life time so you are to replace the SD Card by a new one after long term use Using the Roadscan Pro constant in Continuous Recording mode results in the shortest SD Card life time VEDR Recording mode provides the longest SD Card life time 14 This device is designed to pass the EU and US EMI standard However distance between device and broadcasting reception antenna should be at least 10 cm since there may be intervention with other device 15 All rights to this product s hardware software and data belong to the manufacturer Unauthorized copyin
22. power is input check whether LED and buzzer sound come off Check LED indication and buzzer sound guide 7 The above mentioned product records the image data input from the camera y 0 en as 8 6 u 35 2 Mounting When vehicle is moving or stopped or when contact accident or collision results this product records the before and after of the accident into image At the same time this product records vehicles acceleration x Basic mounting location of the product is top or bottom of front window of the vehicle Attach the product on the position where safe driving is not obstructed 1 Top Mount Advantageous for securing visual field of the driver 2 Bottom Mount In case a navigation device is mounted at the center of the vehicle it allows better image at night y Le en a 6 dal u x Install at a location devoid of intervention when maneuvering room mirror Mount at a distance so that it does not fall into the range of room mirror operation since intervention may result when room mirror is maneuvered by driver or passenger 36 y e2 en re S 6 dal u 3 Mounting sequence x Product s basic mounting location is located at the upper part of the center of the vehicle s front mirror This location is the front part of the room mirror in the case of the passenger car Attach the part with the tape attached onto the mirror and adjust th
23. riod for one year from the day of purchase 2 Attach warranty certificate when you requested repair during warranty period and attach warranty certificate onto product Then request repair at the store where you purchased the product 3 The following cases require you to pay for repair even during warranty period a When malfunction is caused by user s mistake b Malfunction and damage caused during transport movement and fall after product is purchased c Malfunction and damage caused by fire earthquake flood pollution abnormal voltage and use of power besides the designated voltage frequency and other natural calamities d When there is no clause in the warranty certificate e When the clause in the warranty certificate is not included or modified 4 Warranty certificate is effective only for use at the nation where user purchased the product Regarding warranty and A S Warranty period is for one year from the day of purchase Make sure to pick up warranty certificate it is printed on this manual from the store and check whether day of purchase and store are included Read it carefully and keep it well When requesting repair check wiring state and whether there is malfunction caused by maneuvering method Continue to repair when there is a problem During warranty period Attach warranty certificate and take it to the store where you purchased the product We will repair based on the contents of the
24. s automatically progressed 10 Google Map Use Google Map use is provided with charge up to 100 counts If you want to use it afterwards connect www iplk com to pay charge The URL above may be changed upon situation of the company 15 Software guide 1 Software Installation 1 Connect provided SD Card to PC 2 Open program folder within SD Card 3 Run setup exe within program folder 4 When a screen is displayed as below press Next button GE Roadscan Pro 1 11 Installation LE Welcome to the Roadscan Pro Setup Wizard This wizard wil guide you through the installation of Roadscan Pro It is recommended that vou close all other applications before starting Setup This will make it possible to update relevant system Files without having to reboot your computer Click Next to continue Cancel 5 When a screen is displayed as below press Next button y 0 id 6 Ss e Gan N Choose Install Location Choose the folder in which to install Roadscan Pro Setup will install Roadscan Pro in the Following Folder To install in a different Folder click Browse and select another Folder Click Next to continue At least 56 53 Mb of Free disk space is required Destination Folder 16 6 When a screen is displayed as below press Next button Select shortcuts Choose a Start Menu Folder Far the Roadscan Pro shortcuts Cross_ert Daurm
25. the REC button to record image manually and image and information is recorded in Flash Memory and move to SD Card automatically Caution event may not result in the case of minor contact accident or in the case of contact accident involving vehicles that are moving at the same speed In this case press on the REC button to record before and after image for the time designated for recording FN Button Continuous Recording is automatically started 20 seconds after the product is powered on When you press FN button Continuous Recording is stopped and pressing it again Continuous Recording is started again To transmit event data and DT data stored in the internal Flash Memory to SD Card you must press the FN button for 3 seconds y 0 J ge S O FN BUTTON REC BUTTON 12 8 Guide on LED Display and Buzzer Sound Description of LED Display POWER Power off or fault status Abnormal state on the device Operating status with power or battery SD Status with no SD Card or unrecognized SD Card CARD Storing images or upgrading device SD Card is normally operated Blink GPS communication is available but location is not confirmed GPS location is normally confirmed y 0 da J ge Am O 13 Buzzer Sounds and LED Display upon Operation of Product Start After booting Beep Beep POWER SD CARD Normal Beep and GPS are turned status Short
26. tware is ended data file prior to ending is indicated on the File List Overspeed Setup It is standard speed to be used to calculate Overspeed on DT mode y Le id s 6 Ss dad Uien N 20 Software guide Open file and click Graph Display button the below screen will be displayed Graph indication can be converted to Acceleration Impact and Velocity sequentially Click button gt The button will be changed to the impact data the acceleration data 2 10 About Software Shows the version of software and your registered serial number 11 Play Buttons P Play the video display continuously Pause the video display and initialize the video display a Pause the video display a Show previous frame ci Show next frame 12 Auxiliary Buttons Graph indication conversion button This is the function that can convert Graph indication and it is possible to convert Acceleration Impact and Speed in sequence Ge Acceleration data indication Impact data indication Speed indication Drive Route Drawing Button It displays route on Google Map that can operate on DT mode only It displays driving points up to 1000 points with driving record storage interval value to set up location information of the driving data Ed Route Delete Button This is the function that deletes path when path is indicated on the map y O
27. warranty certificate When warranty period has expired Consult with the store where you purchased the product When product function is maintained due to repair we can repair for a charge according to the customer s desire 42 BENELUX Importeur Distributeur BENELUX RCBI BV Spoorstraat 7 U705 4702VV Roosendaal Nederland GSM NL 06 32031740 GSMB 0495 518486 Tel Fax NL 0164 602928 Email info roadscan nl www roadscan nl www roadscan be
28. y data 1 Connect SD Card having device data to PC 2 After executing software click Download button 3 Click confirm button of the Download button o 4 When download is completed click File Open button ES 5 Open downloaded data file o 6 Click Play button P 7 It is possible to display downloaded data as shown on a window below GE BEE EE 31 window 0 Click File Open button 11 Open downloaded driving record data file 2 Click Play button 13 It is possible to display downloaded DT data as shown on a window Software guide y Le y a 6 Ss dad Gan N 7 Acceleration data interpretation method The following includes various data interpretation examples User can confirm the data using the following method and can analyze the type of accident Stop State OG ed 20000000000 Acceleration el 2 N a a n 8a a 8 a a 9n gooeteee OG goof mm m m EE m Right Turn State 33 Time Time Time ecc y nn EE X OG cooudidlecoccccccce Time Brake State GE sm 0G Geo mm m m WEE EE mm 000005000 Time Left Turn State 8 Impact assessment graph If the IMPACT value of one record is greater than the trigger G value then the system is triggered and an image and data set is recorded into memory IMPACT Trigger G Value sensitivity of trigger condition
Download Pdf Manuals
Related Search