Home
        User`s Manual
         Contents
1.  battery manufacturer and manufacturer  of any equipment you intend to use in vicinity of battery     Green Digital Power tech Co   Ltd  Unit 2209  22 F  Wu Chung House  213 Queen s RoadbEast  Wanchai  HK  Tel 852 69527676  Fax 852  30204173    htto   www szgrn com E mail abtwyj 126 com    4 wi   areen        Green Digitol Power    SCM2420 SLA MPPT Solar Charge Controller    User   s Manual          July  2012 Version 1 0  Green Digital Power tech Co   Ltd     Brief Introduction    Diagram for circuits connection  SCM 2420 SLA Solar charger controller is a 300Watt 24 voltage    Maximum Power Point Tracking  MPPT  photovoltaic  PV  battery charge  controller  Through the use of MPPT technology  Solar charger controller can LED sams See let able   increase charge current up to 30  or more compared to conventional  controllers    SCM2420 SLA has a sophisticated charge control system for many kinds  of 50Ahr 200Ahr 24V Lead Acid battery type  such as AGM  GEL or Liquid     The unit is fully protected against over temperature  over current  short circuit  SMBus    reverse battery and reverse PV connections   If provided    Series pass Pulse Width Modulation  PWM  charge voltage control  combined with a multistage charge control algorithm in SCM2420 SLA  It can  easily install in parallel connection of output  so it also suitable for large system    current application condition     Battery       Specification for SCM 2420 SLA    Input solar PV Panel   OCV 35V 55V  PMPP  200W 300W 
2. 10     CAUTION    SAVE THIS INSTRUCTIONS  This manual contains important safety and  Operating Instructions of this unit    Please read the caution of batteries or devices you want to charge firstly   When charging  batteries can emit explosive gases  therefore it is essential to   prevent flames and sparks  The charger is designed for charging 24V lead acid   batteries from 50 to 200 Ah  Do not use for any other purpose    Always provide good ventilation when charging    Use of an attachment not recommended or sold by Green Digital Power tech   may result in a risk of fire  electric shock or Serious Injury to persons    Please use a defined PV solar panel  please see specification of this manual   Please make sure your load device working current is less than 30A    Do not wired this unit and power system with a incorrect cable gauge or   damaged cord    Never operate the charger if it has received a sharp blow  been dropped or   otherwise damaged in any way  take is to a qualified serviceman    Do not disassemble the charger  take it to a qualified serviceman when   service or repair is required  Incorrect reassembly may result in a risk of   electrical shock or fire    When Solar charger controller is working  Please DO NOT touch it because the   temperature is too high     11  Working in the vicinity of lead acid batteries is dangerous  Batteries produce    explosive gasses during normal battery operation  To reduce risk of battery  explosion  follow these instructions by
3. How to use     Suitable Battery 24V 50 200Ahr  Lead Acid battery  Gel  AGM or Liquid types    1  First  please fix SCM2420 SLA on a metal chassis of your solar power        Input solar PV Panel _   Suitable Battery    system box  and always provide good ventilation for your system   2  Then  connect battery poles with the SCM2420 s     BATT    terminals    please make sure polarity is corrected  When battery wired correct  the LED  will be    Green Flashing    status  Please use AWG 16 or better gauge   3  Next  wired PV solar panel with the SCM2420 s      PV      terminals  Polarity  should be correct  When PV panel is connected in daytime  the LED will be  enter  Green solid    or    Red sold    status   ropa 4  Last  please connect terminal      LOAD    with your load device  Such as a  ein DCAC inverter   Also please Keep in mind the polarity should not be wrong   quenmaton           5  Depend on your load working current  the cable between Load and  SCM2420 should be AWG 14 or better  6  When the battery voltage is too low  SCM2420 will cutoff load output  in this  condition the LED will    Red flashing     When battery is charged to a normal  level  please switch off then switch on your LOAD switcher  this reset action  is necessary  otherwise  your load will not work even the battery is full     Note   1  If SMBus port provided  it will work in slave mode and address is 0x16    
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Epson PixiePlus Control System for Projectors Installation Supplement  Impuls 800/1200/2200  Bona Belt Manual (eng)  User manual Wapo-Ex - Wassermann Dental  Sistema 110/150 Manual del operador    Copyright © All rights reserved. 
   Failed to retrieve file