Home

here

1. VisionNOVA omslag 04 07 06 15 11 Side 1 J Camera Monitor Technical specifications Camera Monitor Frequency 2 4 GHz Frequency 2 4 GHz Channel 4 selectable channels Channel 4 selectable channels Modulation FM Receiver sensitivity 80dBm Antenna Built in omni directional antenna Antenna Built in omni directional antenna Image sensor 1 3 CMOS color image sensor Power consumption max 5 Watts Output power max 10 mW CE Power supply 100 240VAC to 5VDC 1A Power consumption max 1 8 Watts or 3 6V 1400mAh LI ION recharge Power supply optional 230VAC to 7 5VDC 300mA able battery or 3 x AA Battery Dimension 140mm x 115mm x 45mm Operational range Up to 100 meters Weight 245g open air situation Dimension 75mm x 45mm x105mm Weight 135g Congratulations We thank you for choosing VisionNOVA Video Babycall and we know you ll be pleased with your choice Please read this manual carefully and keep it for future reference The box includes e One camera e One monitor with an LI ION battery installed e One AV audio video cable e Two power adapters 7 5V DC for the camera and 5V DC for the monitor e This user manual Camera Legend Monitor Legend Camera Connections Power supply The camera can be used with a power adapter or three batteries type AA alkaline On battery power the camera will normally work up to 11 hours Using the power adapter Plug t
2. another channel or turn off the network if necessary Alternatively set Avoid storing in a cold place When the units then warm up to their the network to channel 1 and VisionNOVA to channel 3 normal working temperature condensation may form inside which may e If a microwave oven is used between the camera and the monitor damage the electronic components _ move the microwave oven or turn it off e Bear in mind that public radio frequencies are being used when the e Check that the camera and the monitor are within range of each other units are functioning and that the sound and the pictures may be picked The range is up to 100 metres open air This depends on local up by other equipment on the 2 4 GHz band Conversations even from conditions The range is significantly reduced inside because walls a room close to the camera may be captured by others Always turn off roofs large objects and glass limit the range The picture quality will the camera when not in use in order to protect your private life give you a good indication of reception conditions e Weak batteries will cause interference and reduce the range substantially Guarantee In the 2 4GHz frequency band many types of radio traffic are permitted Normally this may cause obtrusive interference With The guarantee lapses if the units have been opened Unskilled handling NOVA s unique alarm function you avoid the noise and poor image may damage the equipment Any repairs must onl
3. to be replaced Monitor Connections Power supply The monitor can run on the power adapter and the pre installed LI ION rechargeable battery Charging time is 1 to 4 hours whether the monitor is off or on When the monitor is turned off and the charging is completed the indicator for fully charged battery B6 lights up The bat tery will work approximately 6 hours with the monitor flipped down and 2 to 3 hours with the monitor open Using the power adapter Plug the power adapter labelled OUTPUT 5V DC into a wall socket and plug the adapter plug into the rear of the monitor B14 Move the ON OFF switch B13 to the ON position Adjust the volume B9 to the desired level Adjust the brightness B10 to the desired level Channel selection Only one switch B11 must be moved to the ON position Select Channel 1 by moving CH SEL 1 to ON Select Channel 2 by moving CH SEL 2 to ON Select Channel 3 by moving CH SEL 3 to ON Select Channel 4 by moving CH SEL 4 to ON Check that you select the same channel as on your camera Voice activated function Alarm mode Close the monitor B1 Press the alarm button B3 to select Alarm mode for the monitor and the LED indicator for alarm B4 lights up By pressing the alarm button B3 once more the alarm LED indicator B4 will be turned off and the monitor returns to normal mode When the camera is activated by a sound from the baby you are ale
4. cable into the audio video input of the equipment to be used See also the user manual for the equipment to be used You can also use this equipment for another type of monitoring in your house and home Troubleshooting Maintenance If you do not receive any signal at all e Store all parts and accessories out of reach of children e Check that both the camera and the monitor are switched on e Only use the supplied power adapters for the respective unit e Check that power cables are firmly plugged in Do not shake or knock the units e Check that the camera and monitor are tuned to the same channel e Do not use in dirty or dusty environments If the camera and or the monitor are running on batteries replace the Fingerprints or dirt on the lens surface may detrimentally affect the batteries or use the power adapter camera performance Do not touch the lens f the lens is dirty use a lens brush or a soft dry cloth to clean Keep in a dry place Precipitation humidity and liquids may contain If the signal is poor or there is interference minerals that corrode electronic circuits e Check that the channel switches on the camera and the monitor are Avoid storing in a hot room High temperatures may damage the set to the same channel contact between the electronic components and the monitor screen e If a wireless computer network is in operation near you switch to shorten the life of electronic equipment and warp or melt some plastics
5. he power adapter labelled OUTPUT 7 5V DC into a wall outlet and plug the adap ter plug into the underside of the camera A9 Put the ON OFF switch A11 in ON position Using batteries Open the cover of the battery compartment A8 on the rear of the camera Insert three AA batteries so their plus and minus ends are facing as shown on the inside of the battery compartment cover and close the battery compartment securely Move the ON OFF switch A11 to the ON position Discard used batteries in an environmentally friendly and responsible way Never mix old and new batteries Remove the batteries from the camera if you are not planning to use it for a period of time Channel selection Always select the same channel A10 for the camera and the monitor OFF Fine tuning Place the camera in a suitable location and point the lens A1 toward the observation area by rotating the lens body A3 vertically Adjust the focus by turning the lens knob A2 until the image is sharp Night vision The camera has six infrared LEDs A4 that give you Clear images in the dark To activate the infrared function move the switch A11 to the IR position When using the night vision function the picture automatically goes into black and white mode The night vision function is disabled when running on battery power Low battery power indicator The LED indicator for low battery power A6 lights up when the batteries need
6. rted by a beeping sound in the monitor and the alarm LED indicator B4 blinks until the button B3 is pressed again With NOVA s alarm function you can flip down the monitor B1 so that only the sound Is trans ferred from the camera If there is strong ambient noise you can turn the volume off completely B9 and the alarm function will alert you when there is a sound in the child s room without having to watch the monitor You also conserve battery power Low battery power indicator A beeping sound and the low battery power LED indicator B7 will tell you that the battery is getting low Replacing the LI ION battery Open the cover of the battery compartment on the underside of the monitor The battery is pre installed at the factory and must not be removed before it is dead The battery is connected to a small plug Press down the contact see the shaded field and pull up the plug using the two cables Discard used batteries in an environmentally friendly and responsible way The NOVA battery has sophisticated electronic components that prevent the battery from exploding Only the battery provided or an original NOVA battery must be used Other applications Connecting to other equipment The monitor is furnished with an audio video output jack B8 for connecting to a TV VCR DVD or PC Put in the mini jack plug of the provided AV cable into the AV OUT jack B8 of the monitor Plug the other end of the AV
7. y be carried out at an quality but you will still be alerted when your child wakes up ESD secure workstation to avoid damage from static electricity The guarantee does not include the battery because its life span depends on use If you wish to lodge a complaint against the product a copy of the receipt must be attached together with a detailed description of the defect If you supply a complete description of the defect you are ensured the best service and you will be just as happy with your NOVA quality product like thousands of others in Europe

here

Contents

Download Pdf Manuals

Related Search

Related Contents