User`s Manual of Control System
Contents
1. Figure 8 2 5 The way of changing the parameters is all the same as changing speed 1 2 5 Reset the axes Push the Home key when the screen is on the main interface it will show as below Figure 8 2 6 Push the X Keys to move the cursor to one of the entry then push Enter key to restart the selected axes the screen will show some information when reseting 1 2 6 Set the layer parameters After selecting a file to preview on the main interface user can push Enter key to let the cursor move to the first layer then Z Keys can be pushed to select the intent layer on that time user can push Enter key to check the selected layer s parameters show as below 9 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI za TEGHNOLEGY Jinan RECI CNC Machine Co Ltd e Layer set Figure 8 2 7 User can push Z Keys to move the cursor on the intent parameter then he could change the parameter if needed OK to validate the change and Exit to invalidate the change Here please notice that Z Keys are used to move the cursor but not to move Z axes when the cursor is on the layer on the main interface that s to say if user want to move the Z axes he would firstly push the CL key to let the cursor disappea2. The default cursor is on Read button push Enter key to read the config information Z keys could be used to move the cursor to select the intent label If some value is changed move the cursor to Write button and push Enter key then the changed value could be saved 11 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicnc cn recicnc 126 com REGI aya TECHNOLEGY Jinan RECI CNC Machine Co Ltd Lcd type can t be changed There are two options in Com label Ethernet and USB If users want to change this value a password would be needed show as below Com set password 123 Figure 8 3 4 Com set Figure 8 3 5 1 3 3 Function sub menu When the cursor is on Func entry if Enter Key is pushed the screen will show as below Function sett ing Other Mu Origin enable Origin enable RAEES Origin enable Origin 4 enable Set Origin Next Origin i v Origin locat Figure 8 3 6 12 Jinan RECI CNC Machine Co Ltd Wwww recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicnc cn recicnc 126 com RECI 2a TEGHNOLEGY Jinan RECI CNC Machine Co Ltd If the cursor is on Origin X enable push Enter key to enable or disable the selected origin if it s enabled the color frame would be red otherwise it s
3. in the field of the above four parameters which is Y used to confirm whether each axle can be reset on the startup 4 Frame Setting gt Bordering Mode Blanked Bordering means idling to start border preview Outputted Border Cutting can manually cut off the well processed figure 4 corner Dotting means to emit the light at four corner points of the frame to make a point and turn off light The size and position of this figure can be checked intuitively through the four points The bordering speed is the speed value set on the keyboard when the system is idle For light output its minimum maximum power is the corresponding value set on the keyboard when the system is idle The lasering power on the 4 corner dotting means the well set 23 Jinan RECI CNC Machine Co Ltd WWW FECICNC COM Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicnc cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd maximum power gt Margin Distance It means whether to extend a certain length outside the actual frame of the figure on the preview cutting of frame Yy If the frame crosses the border the interface will prompt it If the Enter key is pressed at this time the system will cut the border at the Prompt maximum minimum coordinates first and then border the figure This bordering can be given up 5 Other User Parameters ba Array Mode Two way array or one way array can
4. the Successful Recovery dialog box will pop up to prompt that all manufacturer parameters and user parameters are recovered successfully You can return to the previous menu by press the Enter key gt Auto Focus When the cursor stops at Auto Focus press the Enter key to search for the focus When there is z axes and the z axes reset function is enabled the auto focusing is valid press the Esc key to return the prior menu 1 3 4 User para When the cursor is on User para entry if Enter Key is pushed the screen will show as below Figure 8 3 7 The default cursor is on Read button push Enter key to read all the user parameters If some parameters are changed then press Write button to save the new parameters Write button can be pressed only after Read button is pressed 1 3 5 Machine para When the cursor is on Machine para entry if Enter Key is pushed the screen will show as below 14 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TEGHNOLEGY Jinan RECI CNC Machine Co Ltd a Laser Enable Axis Other Laser config One tube w Laser mode Glass tube v Max power i o x Min power i le Laser freq 1 0 000 la Max power 2 KHz es power 2 x Laser freq 2 000
5. E E rane 33 Foo Mache PI a eria EEEE Ea E seen 33 14 INTRODUCTION TO FILE FUNCTION scccsirasunicedonistvssinvsccdlaseaticoamwacguawsaunaneastuctiessivgeiuncsesuetbivsstenests 34 141 Memory TE renra ee ee eee 34 PAZ US TG e E AE E E E E 35 I5 INTRODUCTION TO DIAGNOSES FUNCTION visiasiscevsssonisnncncctsims kavas cinas aE aiaa aae ieee E a Nai 36 1 6 INTRODUCTION TO SOME ALARM INFO ssscsvssucsxaiesuavessadedieuestinanehdaesueenarasiinioscaniucteiadenvextausnateets 36 2 MANUFACTURER USER PARAMETERS EXPLANATION ccsssssscsssssccssssseccssssseeseees 37 2 1 MANUFACTURER PARAMETERS sci vaciacccasintuensus rE aS aa EEE aN eS a Ea NEOR 37 PAUSER AR A METER oaan A a OSA 40 II Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd 1 Operating Instruction of Panel 1 Introduction to the Keys 1 1 1 Introduction to the whole panel RuwiDbe A S RD320 N Control System system is reseting please wait diag nose Min Max Power Power File Pause 1 1 2 Introduction to the keys Reset B the whole system Origin Origin Key Set the relative origin Laser Laser Key Let the Laser to splash Frame Frame Key To track by the current file s frame 4 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 F
6. Prompt function is started or the processing file is uploaded into the PC and this file selects Take the Original Origin as current Origin the work started for each time will use different origins The rotation order of origin is 1 gt 2 gt 3 gt 4 gt 1 gt 2 gt Origin location There are four entries to be selected Top Left Top Right Bottom Left and Bottom Right When one is selected the previewed graph on the screen would be enantiomorphous based on X or Y direction f This item is only used to preview the file on the screen and it is invalid to the machine s movement Caution gt Set Para After the Set Para is selected and the Enter key pressed the interface will show the specific password to be entered when set as default parameter After the manufacturer regulates all parameters of the machine well including all manufacturer parameters and user parameters this function can be used to store the well regulated parameters to help users to recover the original parameters including all manufacturer parameters and user parameters through selecting Recover Para when they regulate parameters improperly 13 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd gt Recover Para After the Recover Para is selected and the Enter key pressed
7. green gt Multiple Origin Enable Yes or No can be selected If you select No the system will use the single origin logic You can press the Origin key and set the origin and only this origin can become valid If you select Yes the system will use the multiple origin logic and the Origin key on the keyboard become invalid In such a case the parameter of each origin must be set in the menu as follows Origin X Enable After the multiple origin logic is enabled the four origins can independently be prohibited and enabled Set Origin 1 2 3 4 after the multiple origin logic is enabled you can stop the cursor at Set as Origin 1 2 3 4 Press the Enter key on the keyboard and the system will take the coordinate figures of current X Y axles as the corresponding ones to the origin 1 2 3 4 Next Origin there are such five digits as 0 4 for option which are the origins to be used for the next figure Origin 0 means the origin set by the Origin key on the panel in the single origin logic 1 4 means the serial number of the origins in the multiple origin logic Next origin can be modified to any one of origin 1 4 so as to control the start location of next work the premise is that the origin is enabled but it can t be modified to origin 0 Y Once the multiple origin logic is selected and if the serial number of the next origin is 1 and four origins are enabled when the memory file
8. sequence means feeding should be done to one direction and the even sequence means feeding done to the other direction The initial direction for the first time can be changed through setting the directional polarity or modifying the plus and minus values of the feeding length This parameter is valid only when the Z axes function is configured to Drive for Feeding axes gt Power Off Restart Delay it can be set to be 0 3000ms After the power off of the electricity grid the power supply of the system will not drop to O at once There is a delay during this time The delay value set here should basically consistent with the actual off delay value If the deviation of set value is larger on the de energizing for continuous engraving either the figure processed for the second time is not closed with that before the cutoff or it is coincided with that too much Transmission Mode generally the Belt Stepping Type should be made choice of The control algorithm will be changed a little when other types are selected gt Z Axes Function Drive for flat or Drive for Feeding axes are optional Y After the configuration parameters in the manufacturer parameters such l as directional polarity control mode laser type and laser PWM Prompt frequence are modified the system should be reset Such a modification can function upon the resetting of the system 4 Enable Parameters gt Laser 1 Enabled gt La
9. 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd CONTENTS 1 OPERATING INSTRUCTION OF PANE Lsssssesssessnsssscscctsassssensicaneneanensecessavestestosseussstveecsiausaneoievanes 23 1 1 INTRODUCTION TO THE IIE VS aca taeryscl eo inireincclan aiio a E 23 1 1 1 Introduction to the whole PANell ccccccccccccccccccceecsssseeeeceesesenssseseeeeceeseeesssssseeeceseeeeentsaaes 23 1 1 2 Introduction to the HOV S ss stccosuccstsnsenantecinatonsesesieeve onan ctaresiaasbantevandasanaidmineraimieasoiaieiile 23 1 2 INTRODUCTION TO THE INTERFACE FUNCTIONG cccccssssecccessccceeeesceeseesecceseesseeseeeeeeeseeesess 25 1 2 1 The screen of power Oln ossevintccinscsenassdeepececssatesnnastnteaanisabancseiaieatanaesGaanaatnuatantarmznbeeans 25 Pee The manea E aii E A A A 25 Tes CSC FI 1S ie sa a A E mee tase deaatnaaeraeabasaedi noes 26 1 2 4 Max MIN power S THINGS 0000ccccccccccsccccccccceccessssseceeeeecessesssssseeeccccssesessseeeeecesseeeetssaeeeeees 27 12 9 Reset INE ANOS sororis ii a EENE EER A EAEE E 28 1 2 6 Set the layer PArammMelle ls ccccc cc cccccccccccccccescssesssssceececesseseessceeeecececeseessseeeeeeeceesenttaees 28 1 3 INTRODUCTION TO MENUS occiiiiepisriinnicinnsinrasira iinne ei anrr Er ESE iii Ea oae ariei iai 29 F oS NO E E E AEEA EEA EEE EAE A E 29 Riean A EE E E AE 30 159 8 Functor SUD MENU seneni a i iE RENE 31 Te SEIS O oaa E
10. KHz E Laser atten 0 0 x Figure 8 3 8 The default cursor is on Read button push Enter key to read all the machine parameters If some parameters are changed then press Write button to save the new parameters Write button can be pressed only after Read button is pressed 1 4 Introduction to file function 1 4 1 Memory file On the main interface if File key is pressed it will show as below File name 7 Read mem file Figure 8 4 1 When showing this menu the system would read the memory file firstly the file name and the running times would be listed in the left area and the selected file is previewed in the top right area Y keys could be used to move the cursor on the file name list Z keys could be used to move the cursor on the button entry When the cursor is on a target file name presses the Enter key the selceted file will be previewed on the main 15 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TEGHNOLEGY Jinan RECI CNC Machine Co Ltd interface If Home Key is pressed when the cursor is on a selected file name the screen will show as below File oper 2x Treck Work time Clear count Delete Copy to Udisk Figure 8 4 2 Run To run the selected file Track To track the selected file and the t
11. RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd User s Manual of Control System Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd Copyright Declaration Jinan RECI CNC Machine Co Ltd reserves all rights Jinan RECI CNC Machine Co Ltd hereinafter referred to as RECI holds the patent right copyright and other intellectual property rights for this product and its related software Without authorization no one is allowed to copy manufacture process and use this product and its relative parts directly or indirectly RECI is entitled to increase or reduce and modify the shape and functions of this product stated herein as well as amend any documents attached to this product without prior notification The users should peruse this Manual prior to using the product stated herein RECI shall not be responsible for the direct indirect special incidental or corresponding losses or damages arising out of improper use hereof or of this product The machine in operation is dangerous so the users are obliged to design and institute the effective mechanism for error handling and safety protection RECI shall not undertake any duties or responsibilities for the incidental or corresponding losses arising therefrom I Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531
12. anning line feed can be set as a lower value b Scanning Mode it is divided into general mode and special mode for option If special mode is used the laser power should be increased The smaller the speckle percentage is the more the laser power reduces The laser power to set should be larger in order to reach the same scanning depth The purpose to select the special mode is to make the laser light at high power and short time On the depth scanning the effect that the bottom is flatter is obtained but it should be noticeable that if the speckle adjustment is not appropriate it can achieve this goal If the high power remains short the lighting mode will influence the life of the laser The system will default the selection of general mode Speckle Size When the general mode is selected as the scanning mode this parameter will become ineffective when the special mode is selected this parameter will become effective The controller will control this parameter among 50 99 Y The cutting and scanning parameters can t exceed the limited ones in the axle parameters If so the setting will become ineffective and the Prompt system will automatically cover the parameters with the axle parameters 3 Reset Parameters gt Reset Speed it means the speed of X Y axle linkage reset to the origin X axle Startup Reset Y axle Startup Reset Z axle Startup Reset U axle Startup Reset You can select Yes or No
13. as X axle corresponding to the car its typical setting range is 8000 20000mm s2 scope it means the farthest distance that the motion axle can move which is determined in accordance with the actual condition of the machine Key Move Takeoff Speed it means the starting speed to move this axle by way of the keys on the keyboard which can t be higher than the takeoff speed Key Move Acceleration it means the acceleration to move this axle by way of the keys on the keyboard which can t be higher than the maximum acceleration of this axle Scram Acceleration if this axle enables the hard spacing protection when this axle moves to the spacing position it will scram operation at the scram acceleration This value can be 2 3 times of the maximum acceleration for this axle Distance from Origin to Hard Spacing if this axle enables hard spacing protection generally this value should be set to be 2 5mm if it is set to be O when this motion axle moves to the smallest coordinate i e 0 this spacing may be validate which may wrongly triggers the hard spacing protection and scram the machine If the hard spacing protection is not enabled this value can be set to be O 5mm 2 Laser parameters ye ye ye ye ye ye ye ye Laser Configuration single laser and double lasers are available for option and set in accordance with the laser tube quantity provided by the manufacturer Laser Type glass tube RF laser not need pre ignition pul
14. ax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TEGHNOLEGY Jinan RECI CNC Machine Co Ltd File File Key The management of the memory and U disc files speed Speed Key Set the speed of the current running layer or set the direction keys move speed Max Max Power Key poe Set the max laser power of the current running layer or set the power of Laser Key Min l Power l Min Power Key Set the min laser power of the current running layer Stop Key 2 lt To stop the work Pause Start Pause Key To start or pause the work X X X Keys To move the X axes or the left right cursor Y Y Keys To move the Y axes or the up down cursor Z 3 Z Keys To move the Z axes or change the parameter pages HOME i Let the selected axes go back to absolute origin Menu Menu Key Set the system parameter diag nose Diagnose Key Diagnose the system such as the limiter status water protect etc Esc Esc Key To stop work or to exit to some munu 5 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd Enter Enter Key Validate the change Numeral Keys To set the parameters Dot K
15. be selected Two way array means the to and fro cutting of array in sequence one way array means the cutting of array from one direction to another On selecting one way array the elements of each array are the same in action mode and completely uniform in action fluency which takes a little more time than two way array Two way array is the default option gt Back Position The origin the relative origin and the machine s absolute origin can be selected This parameter decides the parking position of laser head after each work Before feeding Time Lag settable at 0 300s The lagged time can facilitate user s feeding and picking on the feeding device After feeding Time Lag settable at 0 9 9s It can facilitate the feeding device s delaying in jarring after moving to the correct position and waiting for the 2 work after the feeding axle stands still completely gt Focus Setting it means the distance from the focal point of laser head lens to Z axle origin When there is no automatic focusing function this parameter becomes invalid Backlash X The X axes backlash accurate to 1um YY Backlash Y The Y axes backlash accurate to 1um 24 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com
16. calculated according to the figure length and measuring length Takeoff Speed it means the speed of the motion axle in direct start from the idle condition If this value is excessively large it will make the motor lose steps jar and even squeak if small it will reduce the running speed of the whole figure If the inertia of the motion axle is larger the axle is heavier you can set a smaller takeoff speed if smaller the axle is lighter you can increase the takeoff speed For example the typical value is 5 30mm s Maximum Speed it means the maximum limit of motion speed that this axle can bear This parameter has something to do with the driving force of motor the inertia of motion axle and its drive ratio For example the typical value is 200 500mm s 19 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TEGHNOLEGY ye Y Jinan RECI CNC Machine Co Ltd Acceleration it means the maximum acceleration of the motion axle in accelerated or decelerated motion If the acceleration is set too large it will make the motor lose steps jar and even squeak if too small it will cause the reduction of acceleration so as to reduce the running speed of the whole figure For the axles with larger inertia such as Y axle corresponding to the beam its typical setting range is 800 3000mm s2 for the axles with smaller inertia such
17. display the coordinate of XYZ axes and the size accurate to 0 1mm Laser max power When system is idle to display the Laser key s power when system is running to display the max laser power of the running layer Work speed When system is idle to display the Up Down or Left Right key s speed when system is running to display the running speed of the current layer File No To display the current selected file s number 7 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com REGI aya TECHNOLEGY Jinan RECI CNC Machine Co Ltd 1 2 3 Speed settings Push the Speed key when the screen is on the main interface it will show as below Figure 8 2 3 Push the X Keys to move the cursor in the numeral area then push the CL key to delete the old value push the Numeral Keys to set the new value then push the Enter key to save the change push the Esc key to invalidate the change 1 2 4 Max Min power settings Push the Max Power or the Min Power keys when the screen is on the main interface it will show as below a BaxPower Figure 8 2 4 8 Jinan RECI CNC Machine Co Ltd WwWww recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI za TEGHNOLEGY Jinan RECI CNC Machine Co Ltd BinPower
18. ey To set the parameters CL CL Key To cancel the last settings 1 2 Introduction to the interface functions 1 2 1 The screen of power on When the system is powered on the screen will show as below RuiDbda ACS i a 332G Control System ease walt Figure 8 2 1 This power on screen can be changed by user If the user defined graph is downloaded by the PC software when restart the system it will show the new graph 1 2 2 The main interface When the system finished searching the machine origin the screen will show as below 6 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd Graph Preview Area Work speed z X Y Z s coordinate Figure 8 2 2 Graph Preview Area To display the whole file s track and display the running track system status To display the current status of the machine such as Idle Run Pause Finsh etc Work No To accumulate the work number of the current file Net status To display the connecting status of the ethernet Data To display the system time Layer Info To display the layers information of the current file such as max or min power speed etc When system is idle dblclick the layer then users can change the layer s parameters and the changing would be saved XYZ s coordinate To
19. glish letters and digits will not show when they are copied to the mainboard The files copied from the mainboard to USB will be placed under the root directory of USB 1 5 Introduction to diagnoses function If the Diagnose Key in the main interface is pressed the system will show as below 17 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI aya TECHNOLEGY Jinan RECI CNC Machine Co Ltd Figure 8 5 1 This interface shows some system input information such as limiter status the status of the water protecting and the status of the foot switch etc When the input is validated the color frame will be red otherwise it s green 1 6 Introduction to some alarm info When users are operating the system or when the machine is running some alarm information such as water protecting error maybe shows as below e RDLaser Water Error Work Paused Figure 8 6 1 18 Jinan RECI CNC Machine Co Ltd Wwww recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicnc cn recicnc 126 com RECI 2a TEGHNOLEGY Jinan RECI CNC Machine Co Ltd 9 Manufacturer User Parameters Explanation 2 1 Manufacturer Parameters 1 axes parameters ye Y YV Y Y Direction Polarity Modification of direction polarity can move the motor to the opposite direction The modification p
20. influence the cutting speed ba Cutting Acceleration it means the highest acceleration value in the whole cutting process ba Cutting Mode it is divided into high speed cutting and precision cutting In high speed cutting priority is given to the cutting speed but in precision cutting the cutting effect Acceleration Mode it is divided into T acceleration and S acceleration T accelerate will quicken the whole cutting process but it will result in that its cutting effect is inferior to that of S acceleration 2 Scanning Parameters Only affect scanning arts X axle Starting Speed Y axle Starting Speed X axle Acceleration Y axle Acceleration The above four parameters are used to set the starting speed and acceleration of two axles on the scanning The higher the two speeds are the quicker the scanning is gt Scanning Line feed Speed this parameter is specially used to control the 22 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd highest speed at which that the previous line vertically moves to the next line in the scanning mode If the space between lines is larger during the scanning or if the distance of each block is larger during the scanning and deblocking of figure it is necessary to position each line or block accurately In such a case the speed of sc
21. r 1 3 Introduction to menus Push the Menu key when the screen is on the main interface it will show as below Fenu 2 x Figure 8 3 1 Push Y keys to select the intent entry then push Enter Key to check the sub menu 1 3 1 Sys info When the cursor is on Sys info entry if Enter Key is pushed the screen will show 10 Jinan RECI CNC Machine Co Ltd WWW FeCICNC cOomM Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicnc cn recicnc 126 com RECI 2a TEGHNOLEGY Jinan RECI CNC Machine Co Ltd as below System info Limit info Total laser H M S 00 00 00 Total on time H M S 00 00 00 Total work time H x 5S 00 00 00 Pre work time H K S 00 00 00 Total work times ZX Total traval m Y Total traval m Total count Figure 8 3 2 The default cursor is on Read button push Enter key to read all the system info and the limit info Z keys could be used to move the cursor and when the cursor is on System info label Y keys could be used to change the label between System info and Limit info 1 3 2 Sys config When the cursor is on Sys config entry if Enter Key is pushed the screen will show as below System config Net setting IP address 000 000 000 000 Gateway 000 000 000 000 Com Ethernet Led type HMI TF320 Write Figure 8 3 3
22. rack mode is optional Work time To forecast the running time of the selected file and the time is accurate to Ims Clear count To clear the running times of the selected file Delete To delete the selected file in the memory Copy to Udisk To copy the selected file to Udisk Cur work time Clear all mem file count del all mem file Format memory speedly Format memory in grain Figure 8 4 3 Cur work time To forecast the running time of the current file the current file No is showed on the main interface and the time is accurate to 1ms Clear all mem file count To clear the running times of every file in the memory Del all mem file To delete all memory files Format memory To format memory and all the files in memory will be deleted 16 Jinan RECI CNC Machine Co Ltd WWW FeCICNC cOomM Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicnc cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd 1 4 2 Udisk file If the Udisk entry in figure8 4 1 is pressed the system will show as figure 8 4 4 and the operation method is all the same as figure 8 4 1 l Read Udisk file Figure 8 4 4 This system supports such file formats of USB as FAT32 and FAT 16 but it can identify them when the files are put under the root directory of USB The file name of more than 8 characters will automatically be cut out by the system The file name that has only En
23. se and RF laser needing pre ignition pulse available for option Maximum Power 1 Minimum Power 1 Laser PWM Frequence 1 Maximum Power 2 Minimum Power 2 Laser PWM Frequence 2 Laser Attenuation Quotiety Laser PWM Frequence is used to set the pulse frequency of control signal used by this laser in general glass tube is about 2OKHZ RF laser is about 5KHZ the maximum minimum power is used to set the limit power of this laser that is to say during the operation the maximum power set by the user can t be higher than 20 Jinan RECI CNC Machine Co Ltd www recicnc com Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicne cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd that set here and the minimum power set by the user can t be less than that set here either When a laser s power is attenuated then the laser attenuation quotiety may be set If it is only provided with the single laser it can show the one path parameter 3 Other Manufacturer Parameters Machine Type In most cases the general engraving machine should be selected and other types used for specific purposes ba Feeding Mode it has single way mode and two way mode for option If it is of single way feeding it is unnecessary to check the coordinates Feeding can be conducted in the single way mode if it is of two way feeding the system will check the maximum and minimum coordinates The odd
24. ser 2 Enabled gt Water Protector 1 Enabled gt Water Protector 2 Enabled gt Door Opening Protection 21 Jinan RECI CNC Machine Co Ltd WWW FECICNC COM Tel 86 531 88785511 58053876 Fax 86 531 8878551 1 E mail sales recicnc cn recicnc 126 com RECI 2a TECHNOLEGY Jinan RECI CNC Machine Co Ltd Whether to Enable the blower Y The Enable Parameters are to enable or disable above functions If the machine is provided with the parameter for the single laser in the Prompt manufacturer parameters the display entry of enabling parameter will change accordingly 2 2 User Parameters 1 Cutting Parameters Only affect cutting arts gt Idle Move Speed this parameter decides the highest speed of all non lighting lines for the machine in the movement process gt Idle Move Acceleration it means the highest acceleration of all non lighting lines Idle stroke speed and idle stroke acceleration can be set higher to reduce the working time of the whole figure but if they are set too high it may cause the jarring of track so comprehensive consideration should be given to the setting gt Turning Speed it means the speed of turning at the acute angle corner which is also the highest speed in the whole cutting process ba Turning Acceleration it means the acceleration of turning at the acute angle corner when cutting If the two speeds are set too high jarring will happen to the turning if set too low it will
25. urpose can move this axle to the origin on resetting If this axle moves far from the origin on resetting it means the direction polarity of this axle is wrong in setting and should be modified Spacing Polarity it is used to set the high and low level mode of spacing signal When the motion axle arrives at the spacing position and input a low level signal to the mainboard the spacing polarity at this time should be set to be minus Key Polarity it is used to control the movement direction of the axle that is moved through manual operation of the keys After the direction polarity is correctly set if you press the directional keys on the operating panel this axle will move to the opposite direction In such a case the polarity of keys should be modified Control Mode Double pulse or direction single pulse are optional in general direction single pulse is selected Hard spacing Protection it is used for whether the hard spacing protection of this axle is enabled Reset Enable if the machine is provided with this axle its Reset Enable should be opened if no its Reset Enable should be prohibited Motor Stepping it means the impulse equivalent the absolute distance gone by the corresponding motion axle when a pulse is delivered to the motor Prior to the correct setting of this value a large rectangle can be cut with the machine the larger the figure is the smaller the difference is The motor stepping can automatically be
Download Pdf Manuals
Related Search