fvx-3000 manual
Contents
1. TECHNICAL SPECIFICATIONS VIDEO Input Interface VGA Female Single Link Output Interface DVI l VGA or DVI D 1920x1200 60Hz DDC Internal Table Can be reprogrammed FVX 3000 Receiver Front sSsmart A i FVX 3000 Fiber Link PCR 5 E jis FiberStatus Data Power Video FVX RX3000 FIBER DIGITAL RECEIVER AUDIO Signal Type Stereo Audio Bandwidth 15Mhz OdB FVX 3000 Receiver Rear OTHER RS 232 Data up to 115200bps USB USB Keyboard and Mouse ONLY Fiber Extender Fiber e 225m Multimode 62 5u e 450m Multimode 50u e Fiber Plug type LC Power External 100 240 VAC 5VDC3A 15W WHAT S IN THE BOX PART NO DESCRIPTION FVX TX3000 FVX 3000 Multimode Transmitter WSN u epew smartavi com Designed and Manufactured in the USA 800 AVI 2131 Tel 818 503 6200 Fax 818 503 6208 11651 Vanowen St North Hollywood CA 91605 SmartAVli com FVX RX3000 FVX 3000 Multimode Receiver PS5VD3A Power Supply 2 5V 3A Smart AVl SMART AUDIO VIDEO INNOVATION FVX 3000 Multimode Fiber KVM Extender Extend USB Keyboard and Mouse Stereo Audio VGA and RS 232 Signal up to 1 400 Feet USER MANUAL INTRODUCTION The FVX 3000 consists of a transmitter and receiver that extend KVM VGA audio and RS 232 signals It is a profes sional quality KVM capable of extending signals up to 1 400 feet over a single multimode fiber optic cable WHY FIBER OPTIC SmartAVl has cre2. VGA monitor use a VGA to DVI adapter to connect it to the monitor Connects the USB keyboard and Mouse ONLY to the USB ports on the RX Connect speakers to the audio port on the RX Connect a multimode fiber optic cable between the TX and RX maximum cable length is 1 400 ft Connect the 5V power supply to both the TX and RX ON Oo A Power on all devices EDID LEARNING The factory video settings of the FVX 3000 has a native resolution of 1920x1080 60Hz which is standard for most HD monitors FVX 3000 is also fully capable of learning and remembering what type of display monitor is con nected to it If the monitor you are using does not support the factory default video resolution learning the EDID of your monitor is necessary 1 Ensure that the units TX and RX are both powered off Power on the display being learned and connect it to the RX using a DVI cable or VGA Connect a multimode fiber optic cable between the TX and RX DO NOT connect the computer to the transmitter Power on the TX and the RX Wait for approximately 30 seconds Then Data and Video LEDs on both the TX and RX should blink on and off continuously for about 10 seconds Then the Video LED will turn on solid for a few seconds and then turn off indicating that the EDID of your monitor has been learned Note If the LEDs do not stop blinking on and off then the EDID is not learned properly thus re learning is required ee IN 6 Plu
3. ated a full line of fiber optic extender products understanding that this technology is superior to traditional cabling Fiber optic cables are e Capable of transmitting over very long distances with no signal loss elmmune to electromagnetic interference In situations where there is considerable interference fiber optic cabling is the only solution eMuch more secure because they cannot be easily tapped For this reason military and law enforcement agencies use fiber optic cables for the transmission of sensitive data e Relatively inexpensive and small enough to be routed through small spaces FEATURES eTop Signal Quality at Maximum Extension Over Multi mode Fiber 1 400 ft e Superior Image Quality at all Resolutions e Video Resolutions up to 1920 x 1200 at 60Hz 1280 x 1024 at 75Hz e Customizable Programmable DDC Table e Supports USB Keyboard Mouse e Supports Stereo Audio e Supports VGA Input e Supports VGA or DVI output e Supports RS 232 Control from 300bps to 115200bps e Fiber Plug Type LC e Compatible With all Operating Systems e Compact Metal Casing APPLICATION DIAGRAM Fiber Optic Cable up to 1 400 ft Transmitter CONNECTING THE FVX 3000 1 Turn off all devices 2 Connect the VGA cable USB cable and audio cable not included to their appropriate ports on the FVX 3000 Transmitter TX 3 Connect the monitor display to the DVI out of the FVX 3000 Receiver RX If using a
4. g the computer into the transmitter If the computer did not automatically detect the TX go to the Screen Resolution Settings on your computer and click Detect T Once the DDC of the monitor is learned the DDC information will be stored in the internal memory of the trans mitter Therefore learning the monitor s DDC again is not required However when using another monitor that has a different native resolution or DDC information than the first monitor then learning is required
Download Pdf Manuals
Related Search