Home

Standard Industrial Monitors User Manual

1. Description Opens the OSD and submenus Selects the highlighted function Saves selections Moves between OSD menus and submenus e Increases or decreases values in OSD menus and submenus Increase or decrease monitor brightness level when OSD is off OSD Button Control Menu Return j Adjust Buttons anh up and down arrows Auto Auto Adjust Exit j Lock Access to the OSD Starts the automatic video adjustment function Exits the OSD OSD Lockout prevents unauthorized or unintentional adjustments to OSD functions To perform an OSD Lock or Unlock on the monitors while the OSD is off press and hold the up and down arrow buttons simultaneously for at least three seconds Adjust the Monitor To adjust brightness levels use the Adjust A buttons on the rear of the Brightness monitor Press the button to increase brightness and the button to decrease brightness while the OSD is off Adjusted settings are automatically saved 26 Rockwell Automation Publication 6176M UM001D EN P December 2012 Display Configuration Chapter 3 Use the Auto Adjust Control IMPORTANT The Auto Adjust function applies only to a VGA analog video source there is no effect on a DVI digital video source When you press the Auto Adjust Exit button the monitor samples the input video signal and accurately adjusts the screen size position and phasing This fun
2. Vertical Position Factory Reset Rotation Submenu Standard Display Configuration Back Rotation 180 Degree Chapter 3 Horizontal Rotation Mirror Right Back Position Table 8 Tool Menu OSD Submenu and Rotation Submenu Descriptions Tool Functions Description OSD Functions Description Value Range OSD Accesses the OSD submenu Timer Sets a maximum idle time for exiting the OSD 0 100 seconds in system if input is not received increments of 2 Factory Reset Resets all OSD settings to factory defaults Horizontal Position Adjusts the horizontal position of the OSD menu 0 255 Back Returns to the OSD main menu Vertical Position Adjusts the vertical position of the OSD menu 0 155 Rotation Adjusts the direction of the OSD menu See submenu below Back Returns to the Tools menu Rotation Functions Description Standard Images are upright and text is read left to right Mirror Images and text are reversed backwards Left View moves from bottom to top of monitor Right View moves from top to bottom of monitor 180 Degree Images and text are reversed and upside down Back Returns to the Tools menu 1 Rotation functions apply to display but not the monitor See installation guidelines on page 13 for monitor orientation Rockwell Automation Publication 6176M UM001D EN P December 2012 33 Chapter3 Display Configuration Notes 34 Rockwell Automation Publicatio
3. Table 6 Color Menu and Temperature Submenu Descriptions Color Functions Description Value Range Manual Adjusts the amount of red green and blue on the screen 0 100 sRGB Automatically adjusts the RGB settings Temperature Adjusts the color temperature values Back Returns to the OSD main menu Temperature Description Value Range Functions Temperature Settings Sets the white point color temperature based on degrees 4200 9300 Kelvin K 4200 5000 6500 typical personal computer 7500 e 9300 typical television and monitor default setting Back Returns to the Color menu Rockwell Automation Publication 6176M UM001D EN P December 2012 31 Chapter3 Display Configuration Image Menu Auto Width Phase Horizontal Vertical Back Position Position Table 7 Image Menu Description Image Functions Description Value Range Auto Automatically adjusts the horizontal and vertical image position frequency phase and black level Width Adjusts the width 0 100 Phase Adjusts the sampling phase 0 100 Horizontal Position Adjusts the horizontal position of the image on the 0 100 screen Vertical Position Adjusts the vertical position of the image on the screen 0 100 Back Returns to the OSD main menu TIP The Image functions are not available with a DVI connection 32 Rockwell Automation Publication 6176M UM001D EN P December 2012 OSD Submenu Tool Menu
4. VESA 282 6 mm 11 0 in 383 6 mm 15 0 in 50 mm 2 0 in 1750M Panel 356 mm 14 0 in 452 mm 17 8 in 53 mm 2 1 in 329 5 mm 12 97 in 424 mm 16 69 in VESA 326 5 mm 12 9 in 421 mm 16 6 in 53 mm 2 1 in 1950M Panel 399 3 mm 15 7 in 482 6 mm 19 0 in 58 mm 2 3 in 363 5 mm 14 31 in 449 6 mm 17 70 in VESA 357 mm 14 1 in 444 m 17 5 in 58 mm 2 3 in In stall the Monitor There are various ways to install the monitors e Panel mount e Rack mount for only 1950M monitors e VESA mount Review each mounting type and monitor dimensions before installation Panel Mounting Panel mount monitors are installed directly into a panel with mounting clips The number of clips varies by model Cat No Monitor Model Mounting Clips 6176M 15PN 6176M 15PT 1550M 10 6176M 17PN 6176M 17PT 1750M 10 6176M 19PN 6176M 19PT 1950M 12 Cat No 6189V MCLPS2 Description Replacement mounting clips 12 Rockwell Automation Publication 6176M UM001D EN P December 2012 15 Chapter2 Installation Panel Mounting Guidelines Observe these guidelines when installing the monitor in a panel e Included with the monitor is Industrial Monitors Cutout Template publication 6186M DS001 with a cutout template for each monitor model Panel cutout dimensions are also listed in Table 1 on page 15 e Cut supporting panels to specifications before installation Take precauti
5. insulation breaks or if the cord develops a loose internal connection Contact your authorized Allen Bradley distributor for ordering information Rockwell Automation Publication 6176M UM001D EN P December 2012 35 Chapter4 Perform Routine Maintenance Other Maintenance Qualified service personnel must perform all maintenance except for the power cord replacement Contact Allen Bradley Technical Support for assistance Backlight Assembly Disposal end of its life this monitor must be collected separately from any unsorted i ATTENTION The backlight assembly in this monitor contains mercury At the municipal waste Ship or Tra nsport the you need to ship PA common me transport it to nes ocation you must first uninstall the monitor and place it in its original packing Monitor material machine panel or rack Doing so may cause damage to the monitor You must uninstall the monitor and place in its original packing material before shipping Rockwell Automation is not responsible for damage incurred to a monitor that is shipped or transported while installed in a machine panel or rack i ATTENTION Do not ship or transport the monitor when it is installed in a 36 Rockwell Automation Publication 6176M UM001D EN P December 2012 Chapter 5 Troubleshoot the Monitor Ch apter Objective This chapter covers the following topics e Run the Self test e Troubleshooting Run the Self test Use the self test procedure to verify
6. Video Cables Index OSD Menus 83 Suis Sense ais elk BE ds ERI OSD Main Meh US s et sa ola on os ete seek eee toned Signal Selection Menus cache j12evevan ri Us shud ai ee ee eae Brightness and Contrast Menu s sssesrrrrsrrrerrrrrrrr eran ra COLOR V ETT 424000 05 5a salah ahr E SST PASI AS sr eae ne Image Menus iieo ae E A EE A EE AA a Tool MSR hrs oly nira Aare near a a aa As Chapter 4 Chapter ODjechive v2 natures names EEE E EE ee AES Clean the Monitor anse ge p dat eerie a Pade ee Bare A Replace a Line Cord sieeve eee ta Other Maintenahcen niner adau oi e a AAE E l ae Backlight Assembly Disposal s ccielsiebcivins Jeceinn deus sy ends Ship or Transport the Monitor ssesssrrserrrsrrrrrrrrrrr rss Chapter 5 Chapter Objectives eis vidi tate a BATEE EE ERA ETES Run the Self test E E E Troubleshooting rennin i e e E eases RS E Appendix A Appendix B Set Up the Touchscreen Interface 12 yp eene nivel beh tee eee elo Enable the Touchscreen Interface sssseeeerrrrrrrrrrrrrr rst Install the Touchscreen Driver Software ssssrrsrrrrrrsr resa Perform a Calibration ssesserrerrrrrrsrrrrrrr rss rr rer r ra Appendix C HD 15 Video Connector sssesesereersrerrrrrr rer rr rr rer ror rens DVI Video COnnecCtOr ssresrerrerrerrrrrr rer r rr rr rr ror rss Rockwell Automation Publication 6176M UM001D EN P December 2012 Preface Objectives Purpose of This Manual Abbreviations
7. Description 6189V MPS3 Replacement AC power adapter Follow these steps to connect power to the monitor 1 Connect the supplied AC power adapter cable to the power input connector on the monitor A Secure this connection by screwing the barrel over the threads B 2 a 3 Connect the AC power cord to the main power supply C Using the functional ground screw is not required for safety and regulatory compliance However you can use the functional ground screw on the rear panel of the monitor if a supplemental ground is desired Use optional cable ties to organize the monitor cables and secure them to the cable restraints on the back of the monitor Organizing your cables provides easier access and identification 2 000000000000000000000000000000000 Monitor Cables j 2 j ej 0 l eo RR tiona P 0000 0000 9 P IT 0000 o 0000 Cable 0000 5 0000 Ties 0000 0000 0000 o o o ooon 0000 0000 0000 So Of 0000 0000 0000 NANANNANANNNNANANNNND q LEE E rr I 00 00 Cable Restraints on Back of Monitor 00 00 Rockwell Automation Publication 6176M UM001D EN P December 2012 23 Chapter2 Installation Notes 24 Rockwell Automation Publication 6176M UM001D EN P December 2012 Chapter Objective Set the Monitor Type Che
8. Screen is blank The video mode may be out of range Change to the native resolution Disable the screen saver Adjust the brightness and contrast settings using the appropriate OSD menu Verify that the power cord is connected Test the outlet by plugging in a properly functioning device Replace the suspected faulty cable or power cord Have the monitor serviced Video mode is not supported Check the maximum resolution and the frequency on the video port of your computer Picture is scrambled The video mode may be out of range Change to the native resolution Check the video cable connection between the computer and monitor Make sure you are using the video cable supplied with the monitor or a similar high quality cable Check the maximum resolution and the frequency of the video port of your computer Perform the automatic video adjustment function Picture is not clear Verify that the refresh frequency rate is set to 60 Hz Access the Control Panel gt Displays gt Settings then click the Advanced button and the Monitors tab Check the video cable connection between the computer and monitor Make sure you are using the video cable supplied with the monitor or a similar high quality cable Perform a monitor reset Eliminate unnecessary accessories such as video extension cables Perform the automatic video adjustment function Vertical shaded bars on scree
9. 1 Nem 10 lbein by following the torque sequence in Figure 1 on page 16 making sure to not overtighten provide a proper seal and prevent damage to the monitor Rockwell Automation assumes no responsibility for water or chemical damage to the monitor or other equipment within the enclosure because of improper installation i ATTENTION Tighten the mounting clips to the specified torque to 8 Repeat the torque sequence at least three times until all mounting clips are torqued to 1 1 Nem 10 Ibein and the sealing gasket is compressed uniformly against the panel Rack Mounting 1950M monitors The 1950M monitor is installed directly into a standard 19 inch rack Make sure there is adequate space behind the rack panel Allow minimum clearances for cables and airflow See Panel Mounting Guidelines on page 16 Mount the 1950M Monitor in a Rack Follow these steps to mount the 1950M monitor in an EJA rack cabinet 1 Position the monitor into a standard 19 inch EIA rack cabinet A as shown in Figure 2 on page 18 TIP For ease of installation make sure two or more people help to install the monitor Slide the two clips into the first slots on the sides of the monitor B Tighten the clips to a torque of 1 1 Nem 10 lbein C Slide the remaining clips into the slots on the sides of the monitor D A ob Bw N Tighten the remaining clips to a torque of 1 1 Nem 10 lbein C Rockwell Automation Publicatio
10. 9600 Kbps You are now ready to install the touchscreen driver on the Industrial Monitors and Accessories CD After installing the driver software follow the instructions in the touchscreen documentation Following installation of the touchscreen software and calibration the touchscreen is ready to use Rockwell Automation Publication 6176M UM001D EN P December 2012 HD 15 Video Connector Appendix C Video Cables You can use the HD 15 connector cable included with your monitor to connect the monitor to the host computer The HD 15 video cable 1 83 m 6 ft has a conventional HD 15 connector at each end The Standard DVI Video Cable table provides the pin numbers and corresponding pin assignments for the HD 15 video connector with the DDC2B capability 00000 000 0 0000 P Oz Table 15 Standard HD 15 Video Cable female male female male 1 Redvideo 1 9 VGA power 9 2 Green video 2 10 Not used 10 3 Blue video 3 11 Not used 11 4 Not used 4 12 DDC data 12 5 Hot plug detect 5 13 Horizontal sync 13 6 Red video ground 6 14 Vertical sync 14 7 Green video ground 7 15 DDC clock 15 8 Blue video ground 8 Rockwell Automation Publication 6176M UM001D EN P December 2012 45 DVI Video Connector The Standard DVI Video Cable Connecto
11. All monitors support analog video Your monitor is shipped with a high quality analog video cable Use this video cable to connect a computer to the monitor Cat No Description 6189V VGACBL2 Analog video cable 1 9 m 6 3 ft 6189V PCIDVI Dual analog digital video card PCI Follow these steps to connect the monitor to an analog video source 1 Connect one end of the analog video cable to the female HD 15 video input connector on the monitor 2 Connect the other cable end to the VGA port on the computer or to the video generator VGA port if used TIP You can use a cable with a maximum length of 15 m 50 ft at lower monitor resolutions provided it is a high quality video cable Video amplifiers are available for longer distances You can connect the monitor to a video generator that does not conform to VGA standards if the generator provides analog RGB video signals 0 714V above reference black into 75 W and separate horizontal and vertical sync signals Depending on the signal the monitor may or may not function properly Connect to a Digital Video Source All monitors support digital video Use a digital video cable to connect a computer to the DVI connector on the monitor This cable is not supplied but can be purchased as an accessory Cat No Description 6189V DVICBL2 Digital video cable 1 8 m 6 ft 6189V DVICBL5 Digital video cable 5 m 16 4 ft 6189V PCIDVI Dual analog digital video card PC
12. Touchscreen Driver Before installing the touchscreen driver we recommend that you check cable connections and communication rate for the interface you are using Interface RS 232 Action Verify that the supplied RS 232 cable is properly installed between RS 232 input connector on the monitor and the host s COM port Verify that the communication rate of the COM port matches the touchscreen controller communication rate The controller communication rate is factory set at 9 600 baud USB Verify that the USB cable is properly installed between the USB input connector on the monitor and a USB port on the host computer You are now ready to install the touchscreen driver found on the Accessories CD or at http www ab com linked industrialcomputers drivers monitors html Perform a Calibration After installing the driver follow the calibration instructions in the touchscreen documentation After calibration the touchscreen is ready to use 22 Rockwell Automation Publication 6176M UM001D EN P December 2012 Connect Power Functional Ground Screw Secure Cables Installation Chapter 2 With the AC power adapter the monitor can use a single phase AC power supply providing 90 264V AC at 47 63 Hz Use only the AC adapter supplied with the monitor Power must be available at a nearby grounded outlet Whenever possible connect the monitor to the same AC power source that supplies the computer Cat No
13. are required for installation e Panel cutout tools e 2 Phillips torque screwdriver Review the monitor dimensions to make sure you allow adequate clearance around the monitor for ventilation and cable connections 1 Item Monitor Location Clearance min 1 Top 77 mm 3 in 2 Side both 50 mm 2 in 3 Back 50 mm 2 in gu 2 4 Bottom 50 mm 2 in IMPORTANT Do not operate the monitor in an enclosure that uses minimum clearances unless adequate ventilation or other cooling methods are used to maintain the monitor temperature at its specified rating The ambient temperature around the monitor must not exceed the operating temperature specified in Table 13 on page 42 Rockwell Automation Publication 6176M UM001D EN P December 2012 Monitor Dimensions Installation Chapter 2 The following illustration and table show dimensions for the panel mount and VESA mount monitors 1750M Panel Mount Shown 1750M VESA Mount Shown A A N D A A b D D J lt B gt Che Y L k B gt C H Table 1 Monitor Dimensions 6176M Model Mount A height B width C depth Panel Cutout Height Panel Cutout Width 1550M Panel 309 mm 12 3 in 410 mm 16 1 in 50 mm 2 0 in 285 6 mm 11 24 in 386 6 mm 15 22 in
14. for proper video cable installation Replace the suspected faulty cable Test the video source by connecting to another monitor that you know is operational Brightness issues that cannot be corrected can be the result of a poor video signal output from the video source 38 Rockwell Automation Publication 6176M UM001D EN P December 2012 Table 9 Troubleshooting continued Symptom Screen image is not centered or sized properly Troubleshoot the Monitor Chapter 5 Action The video mode may be out of range Change to the native resolution Adjust the horizontal and vertical position settings using the appropriate OSD menu Check the image size selection using the appropriate OSD menu Perform the automatic video adjustment function Color is not uniform Adjust the color setting using the appropriate OSD menu Colors are distorted with dark or shadowed areas Adjust the color setting using the appropriate OSD menu White does not look white Adjust the color setting using the appropriate OSD menu Image position changes are not saved Reposition the image using the appropriate OSD menu Make sure you press the Menu Return button to save selections The power indicator blinks amber once The monitor is saving your changes to the OSD menu The power indicator is amber The monitor is using its power management OSD does not respond to any button press except ON OFF and Auto
15. subsection 19 Modified illustration in Monitor Connections section 19 Updated information and illustration in Connecting the USB and Optional USB Touchscreen 22 Interface subsection Added the Installing the Touchscreen Driver subsection 22 Added the Performing a Calibration subsection 22 Changed Chapter 3 title from Video Setup to Display Configuration 25 Added Tip table to Check and Change the Display Resolution section 25 Changed OSD lock access time from eight to three seconds 26 Changed section title from Perform the Automatic Video Adjustment Function to Use the Auto 27 Adjust Control Updated information and Important table in Use the Auto Adjust Control section 27 Added Important table to Use the Auto Adjust Control section 27 Updated information in General OSD Menu Navigation Guidelines subsection 28 Added cross reference to Tip table for Brightness and Contrast Menu subsection 30 Removed Auto button and corresponding information in Color Menu subsection 31 Added OSD Submenu and Rotation Submenu tables in Tool Menu subsection 33 Added replacement screen covers table in Clean the Monitor section 35 Updated and added information in Table 8 Display in the Specifications section 41 Added illustration to HD 15 Video Connector section 45 Added illustration to DVI Video Connector section 46 Rockwell Automation Publication 6176M
16. that your monitor is running correctly If the monitor and computer are property connected but the monitor remains dark and the power indicator is blinking run the self test Follow these steps to run the self test 1 2 3 Shut down the computer and disconnect power to the monitor Unplug the video cable from the back of the computer Apply power to the monitor If the monitor is functioning properly a self test box appears that reads No Signal IMPORTANT This self test box also appears during normal operation if the monitor is disconnected or damaged Disconnect power from your monitor and reconnect the video cable 5 Apply power to your computer and the monitor If your monitor screen remains blank after the previous procedure check your video controller and computer system because your monitor is functioning properly Rockwell Automation Publication 6176M UM001D EN P December 2012 37 Chapter5 Troubleshoot the Monitor Troubleshooting The troubleshooting table lists typical issues you may encounter when using your monitor It contains symptoms and possible actions to correct an issue Table 9 Troubleshooting Symptom No Sync or No Signal going to sleep appears Action Check the video cable connection between the computer and monitor Make sure you are using the video cable supplied with the monitor or a similar high quality cable Perform the automatic video adjustment function
17. the six OSD main menu tabs starting on page 30 for where the Back Ej and Exit buttons are located Press the Menu Return button to do the following Open the OSD main menu Activate the highlighted function Activate a highlighted sub function Press the arrow NI buttons to do the following Move between the function icons Make your changes Select the sub function if an icon has more than one sub button As you move from one function to the other the function menu changes to represent the correct icon Press the Back ae once to return to the OSD main menu where you can select another function Press the Exit button to exit the OSD main menu 28 Rockwell Automation Publication 6176M UM001D EN P December 2012 OSD Menus Display Configuration Chapter 3 You can modify the settings to the monitors by using the following menus e Signal Selection e Brightness and Contrast e Color e Image e Tools OSD Main Menu 1024x768 59 8Hz Signal Brightness Video Resolution and Refresh Rate Image Tools Selection amp Contrast Table 3 Main Menu Description Main Menu Signal Selection Description Accesses options for selecting analog or digital picture input The input selection depends on the signal from the computer and the type of cable connected to the monitor Brightness amp Contrast Accesses functions to adjust the brightness and contrast Color Acc
18. Additional Resources Preface This preface covers the following topics e Purpose of This Manual e Abbreviations e Additional Resources This manual is a user guide for following e Install the monitor the monitors It provides procedures to the e Make monitor connections e Configure the monitor s video setup e Troubleshoot the monitor The following abbreviations are used in this publication Abbr Meaning BIOS Basic input output system Abbr Meaning PELV Protective extra low voltage COM Communication serial port interface POST Power on self test CRT Cathode ray tube SELV Safety extra low voltage DIMM Dual in line memory module TFT Thin film transistor DVI Digital visual interface USB Universal serial bus LCD Liquid crystal display VGA Video graphics array OSD On screen display These documents contain addi from Rockwell Automation Resource Industrial Monitors Cutout Template publication 6186M DS001 tional information concerning related products Description Provides cut out templates to panel mount 6176M industrial monitors Industrial Automation Wiring and Grounding Guidelines publication 1770 4 1 Provides general guidelines for installing a Rockwell Automation industrial system You can view or download publications at the http www rockwellautomation com literature To order paper copies
19. I Follow these steps to connect the monitor to a digital video source 1 Connect one end of the digital video cable to the female DVI video input connector on the monitor 2 Connect the other cable end to the output of any digital DVI video source TIP For a DVI cable longer than 5 m 16 4 ft use a DVI cable extension However DVI cables longer than 5 m 16 4 ft exceed the DVI maximum cable length specification 20 Rockwell Automation Publication 6176M UM001D EN P December 2012 Installation Chapter 2 Connect USB Peripheral Devices The monitor is equipped with a USB hub that provides communication between a computer and any USB compatible device such as a keyboard mouse or memory stick The USB hub ports are enabled only when the monitor is powered on and the connection is made between the type B connector and the computer Connect the Optional Touchscreen Interface An optional touchscreen provides a high resolution touch input system The driver software included with the monitor lets the touchscreen function with many Microsoft Windows industrial applications such as a pointing device or mouse A touchscreen interface to the computer can be configured using either the serial RS 232 connection or USB connection Connect the Optional Serial RS 232 Touchscreen Interface The RS 232 DB9 female D shell connector on the bottom side of the monitor provides the serial touchscreen interface connection to the host F
20. Installation Chapter 2 Mount the Monitor on a Bench or Tabletop Follow these directions to mount the VESA monitor to a bench or tabletop 1 Mount the arm to the bench or tabletop by using screws bolts or clamps so the monitor cannot tip 2 Align the VESA mounting holes in the back of the monitor with the holes i in the arm bracket 3 Insert the four supplied VESA mounting screws through the arm brackets and into the monitor Install Arm Install Monitor to Arm Monitor Mounting Holes 4 4 Tighten the screws to secure the VESA monitor to the arm Monitor Connections Use the connectors on the rear of the monitor to connect the following Analog video source HD 15 VGA connector Digital video source DVI connector Serial port on a computer for the optional touchscreen interface USB port on a computer for the optional touchscreen interface USB hub device ports for connecting peripheral devices Power DC input connector must be used with supplied AC power adapter Back of Monitor oe p No Connector No Connector 1 DVI D video input 5 DC power input AC adapter 2 HD 15 video input 6 USB Type A connection to peripheral devices 2 3 USB Type B connection to computer 7 M5 ground screw 4 RS 232 input optional Rockwell Automation Publication 6176M UM001D EN P December 2012 19 Chapter2 Installation Connect to an Analog Video Source
21. Marked for all applicable e European RoHS directives e China RoHS e RoHS Compliant e UL c UL Listed 1 See http www rockwellautomation com certification overview page for declarations of conformity certificates and other certification details 42 Rockwell Automation Publication 6176M UM001D EN P December 2012 Set Up the Touchscreen Interface Appendix B Touchscreen Serial Interface All touchscreen controllers are configured by default to provide serial communication at 9600 Kbps 8 data bits 1 stop bit and no parity The RS 232 and USB input connectors on the monitor provide a communication channel between the touchscreen controller which is mounted inside the monitor and either the RS 232 or USB connector on the host computer Because the touch controller obtains power from the monitor s power supply no external touch power connections are necessary The monitors ship with a serial RS 232 and USB touch screen interface cable Software supplied with the touchscreen must be loaded on the host computer to handle communication with the touch controller over the channel Because the touchscreen emulates a mouse there may be compatibility issues involving how the touchscreen emulates mouse buttons especially multiple buttons For a complete discussion of these issues and how to troubleshoot them refer to the touchscreen documentation To set up the touchscreen system you must do the following e Enable the Touchscr
22. Please contact your local Rockwell Automation representative for the return procedure Documentation Feedback Your comments will help us serve your documentation needs better If you have any suggestions on how to improve this document complete this form publication RA DU002 available at http www rockwellautomation com literature Rockwell Otomasyon Ticaret A Kar Plaza Is Merkezi E Blok Kat 6 34752 Icerenk y istanbul Tel 90 216 5698400 www rockwellautomation com Power Control and Information Solutions Headquarters Americas Rockwell Automation 1201 South Second Street Milwaukee WI 53204 2496 USA Tel 1 414 382 2000 Fax 1 414 382 4444 Europe Middle East Africa Rockwell Automation NV Pegasus Park De Kleetlaan 12a 1831 Diegem Belgium Tel 32 2 663 0600 Fax 32 2 663 0640 Asia Pacific Rockwell Automation Level 14 Core F Cyberport 3 100 Cyberport Road Hong Kong Tel 852 2887 4788 Fax 852 2508 1846 Publication 6176M UM001D EN P December 2012 Supersedes Publication 6176M UM001C EN P September 2007 Copyright 2012 Rockwell Automation Inc All rights reserved Printed in the U S A
23. UM001D EN P December 2012 Summary of Changes Notes 4 Rockwell Automation Publication 6176M UM001D EN P December 2012 Preface Monitor Features Installation Display Configuration Table of Contents Preface Objectives cits tuc mend stiri hirou seder oat Res 7 Purpose of This Manuals eco sdysas ses rad etek eed ir 7 WUD Die yi ations oe 2a are Fain esas BR HR a tk EEE aS 1a eRe 7 Additional Resources ssesrrrserrrrrererrrrrrrrrrrr rr rss ers rss os 7 Chapter 1 Chapter Objectivesiass sve ss moisi Sees ae Sey aN 9 Monitor Overview vcs ence cine sate oie ta ewe pee eee He ES 9 Monitor Options seess views ts eee ees heat eb eran ete hs de bl taal 10 Before You Begin isso shut hones FAN ANA sier Samu eep nuns ba auras 10 Parts Listoni rne rr toes tere Raa Ipren ANG PRs Dhak EO A 10 Chapter 2 Chapter Objectives ineeie ye egansa EEEE ENSE PTENT 11 Installation PrecautionNS sssserrrrrrrrrrrrrrrr rer res rr rt 12 Environment and Enclosure Information os gt 12 European Union Directive s ssssssseeerrrerrrrrrrrrrrrrr coves 12 Installation Guidelines sssssserrsrrrrrrrrrrrrrr rererere 13 Reg ired Tools se eri a e E nns A E lang oem 14 Mounting Clearance Requirements ssessresersrerrrrerrrrrer sa 14 Monitor Dimensions 00 0 cece a AAA NA endel Aa REN 15 Install the MOnitOr sserrrerrrrrrrrrrrrrrrrrr rer rer sr ss 15 Panel Mounting sssesesererrerrrrrrrrrrrrr er
24. User Manual Allen Bradley Standard Industrial Monitors Catalog Numbers 6176M 15VN 6176M 15VT 6176M 15PN 6176M 15PT 6176M 17VN 6176M 17VT 6176M 17PN 6176M 17P1 6176M 19VN 6176M 19VT 6176M 19PN 6176M 19PT Allen Bradley Rockwell Software Automation Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment Safety Guidelines for the Application Installation and Maintenance of Solid State Controls publication SGI 1 1 available from your local Rockwell Automation sales office or online at http www rockwellautomation com literature describes some important differences between solid state equipment and hard wired electromechanical devices Because of this difference and also because of the wide variety of uses for solid state equipment all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable In no event will Rockwell Automation Inc be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment The examples and diagrams in this manual are included solely for illustrative purposes Because of the many variables and requirements associated with any particular installation Rockwell Automation Inc cannot assume responsibility or liability for actual use based on the examples and diagrams No patent liability is a
25. adjust A firm button press is required Make sure the OSD lockout is disabled Rockwell Automation Publication 6176M UM001D EN P December 2012 39 Chapter5 Troubleshoot the Monitor Notes 40 Rockwell Automation Publication 6176M UM001D EN P December 2012 Appendix A Specifications Table 10 Display Attribute 1550M Models 1750M Models 1950M Models Display type Color Active Matrix TFT LCD Touchscreen description Resistive antiglare Touchscreen controller Series A and B Series C Panjit EETI Available touchscreen drivers Series A and B Windows XP Professional e Windows Server 2003 32 bit e Windows 7 Professional 32 bit Series C e Windows XP Professional e Windows Server 2003 32 bit e Windows 7 Professional 32 bit and 64 bit e Windows Server 2008 64 bit Display size diagonal 381 mm 15 0 in 432 mm 17 0 in 483 mm 19 0 in Display area WxH approx 305 x 229 mm 338 x 270 mm 377 x302 mm 9 0 x 12 0 in 13 3 x 10 7 in 14 8x 11 9 in Resolution WxH approx 1024 x 768 native 1280 x 1024 native mode 16 7M colors mode 16 7M colors Luminance typical 350 cd m Nits 300 cd m Nits Contrast ratio typical 400 1 800 1 Response time Rising 4ms 6ms Falling 12 ms 3 ms Backlight CCFT tubes 50 000 hr for 1 2 brightness Table 11 Mechanical Attribute 1550M Models 1750M Models 1950M Models Dimensions HxWxD approx Panel mount monit
26. ation Summary of Changes This manual contains new and updated information Changes throughout this revision are marked by change bars as shown to the right of this paragraph This table contains the changes made to this revision Topic Page Added Preface Objectives title and updated section information 7 Added Abbreviations section 7 Updated hypertext links for Rockwell Automation websites 7 12 42 Added Bezel column to table in Monitor Options section 10 Consolidated Environment and Enclosure Information and European Union Directive information 12 into new Installation Precautions section Added Important table and cross references in Installation Guidelines section 13 Added monitor tilt information and illustration in Installation Guidelines section 13 Removed mounting clearance information from Panel Mounting section for new Mounting 14 Clearance Requirements section Consolidated all dimensions into one illustration and one table in Monitor Dimensions section 15 Added Install the Monitor section title and introductory paragraph 15 Added table for replacement panel mounting clips 15 Consolidated two mounting clip illustrations into Figure 1 16 Removed rack mounting information for 1550M and 1750M monitors 17 Added step 2 and illustration to Mounting the Monitor on a Bench or Tabletop
27. ck and Change the Display Resolution Chapter 3 Display Configuration This chapter covers the following topics Set the Monitor Type Check and Change the Display Resolution How to Use the OSD Buttons How to Use the OSD Buttons Use the Auto Adjust Control Change Monitor Settings with OSD OSD Menus The monitors are plug and play compliant devices Your computer automatically sets the monitor type Additional setup is not required Flat panel monitors are fixed resolution devices The image looks best when the monitors are operated at their native resolution However the monitors have advanced scaling capabilities to make the display look as good as possible while running in non native modes These are the native resolutions of the monitors 1550M 1024x768 1750M and 1950M 1280x1024 If you switch the resolution of your monitor from its native resolution the display may look slightly distorted due to the replication techniques used to fill the full screen with an image To check or change your monitor s display resolution access the Display settings in the Control Panel on your computer TIP A refresh rate of 60 Hz is optimal for LCD flat panel displays Rockwell Automation Publication 6176M UM001D EN P December 2012 25 Chapter3 Display Configuration How to Use the OSD Buttons To adjust your monitor use the OSD buttons at the rear of the monitor Table 2 OSD Buttons Description
28. ction works with most screens that use reasonable video content but Rockwell Automation ships a ScreenSet monitor set up utility on a CD to display the best possible image for setup IMPORTANT The ScreenSet monitor set up utility is designed for only Windows 32 bit and 64 bit operating systems 1 Insert the Accessories CD provided with the monitor into your computers CD ROM drive 2 Locate and start the ScreenSet utility that is named ScreenSet exe Aut 3 Press the Auto Adjust Exit lt button The auto adjustment display appears Your screen has the potential to flicker during the Auto Setup process When the auto adjustment is complete your monitor is properly adjusted and the settings are automatically saved TIP A computer switches through several video modes while starting The monitor stores set up information for each video mode If you have trouble reading the display during the starting video modes you can also press the Auto Adjust Exit button during that time Rockwell Automation Publication 6176M UM001D EN P December 2012 27 Chapter3 Display Configuration Ch ange Monitor Settings Use the OSD buttons on the back of your monitor to change your monitor s with OSD settings The OSD contains similar menu functions for each monitor The menus are icon driven General OSD Menu Navigation Guidelines See How to Use the OSD Buttons on page 26 for where the Menu Return and arrow buttons are located See any of
29. e options available for standard industrial monitors Display Mounting Cat No Size in Option Bezel Touch Screen 6176M 15VN 15 VESA Plastic with None reinforced steel 6176M 15VT Resistive touch screen 6187M 15PN Panel Aluminum alloy None 6176M 15PT Resistive touch screen 6186M 17VN 17 VESA Plastic with None reinforced steel 6186M 17VT Resistive touch screen 6186M 17PN Panel Aluminum alloy None 6186M 17PT Resistive touch screen 6186M 19VN 19 VESA Plastic with None reinforced steel 6186M 19VT Resistive touch screen 6186M 19PN Panel Aluminum alloy None 6186M 19PT Resistive touch screen Before You Begin Before unpacking the monitor inspect the shipping carton for damage If damage is visible immediately contact the shipper and request assistance Otherwise proceed with unpacking Keep the original packing material in case you need to return the monitor for repair or transport it to another location Use both the inner and outer packing cartons to provide adequate protection for a monitor returned for service Parts List The monitors are shipped with the following items Industrial Monitors and Accessories CD that contains device drivers Installation instructions this document Cutout template publication 6186M DS001 Mounting clips Four VESA mounting screws M4 x 0 7 Power adapter and line cord both AC HD 15 analog video cable RS 232 touchscreen interface cable for touch enabled monitors USB touchscreen inte
30. e rr rr rr rr ere rasa 15 Rack Mounting 1950M monitors sssesrserrserererrera 17 VESASVIOUMIING 605504 na 2554 aaa AEE EEEREN S 18 Monitor Connections 0000 cece cece ence cent enna sr rr rs 19 Connect to an Analog Video Source ssssssrsererrrrrrrrere rr 20 Connect to a Digital Video Source ssrssssrrrsererrrrrrerer era 20 Connect USB Peripheral Devices sssesersersrrerererrerr rs 21 Connect the Optional Touchscreen Interface sseesora 21 CI ONNECET OWEI tar rater bar AAs os Fhe ers Meo eRe 23 Functional Ground Screw sssereeerrrrrrrrrrrrrrr rr ban eens 23 Sectite Cap esis jas ohare b rs SL Sot Ad ers rr SNS ET 23 Chapter3 Chapter Objectives ses mosse es EEEREN AE e oh Pes 25 Set the Monitor TYPE ach choueneceran susse eter ease see sas 25 Check and Change the Display Resolution sssssssresererrrsra 25 How to Use the OSD Buttons sseserrrsrrrrrrrrrrrerrrrrrr resa 26 Lock Access to the OSD s sssoseseseeseseeresesrrr rer ser rs anata 26 Adjust the Monitor Brightness ssssesesrerererrrrrrererrrr era 26 Use the Auto Adjust Control s sssssssrsersererrrrrrrrerrrrrr rer rr ra 27 Change Monitor Settings with OSD ssssssesesrrererrrrrer renar 28 General OSD Menu Navigation Guidelines 046 28 Rockwell Automation Publication 6176M UM001D EN P December 2012 5 Table of Contents Perform Routine Maintenance Troubleshoot the Monitor Specifications Touchscreen Serial Interface
31. een Interface e Install the Touchscreen Driver Software e Perform a Calibration Rockwell Automation Publication 6176M UM001D EN P December 2012 43 AppendixB Touchscreen Serial Interface Enable the Touchscreen Interface Install the Touchscreen Driver Software Perform a Calibration The monitors have an RS 232 input and USB input connector on the rear of the unit These connectors provide the interface for the touch controller The table shows how to interconnect the RS 232 wiring to the host serial port Monitor Host DTE Device ayy Signal Description DB 9 Female DB 25 Male 1 Not connected DCD 1 8 2 Transmit Data TXD 2 3 3 Receive Data RXD 3 2 4 Data Terminal Ready DTR 4 20 5 Common Signal Return SG 5 7 6 Not Connected DSR 6 6 7 Request to Send RTS 7 4 8 Clear to Send CTS 8 5 9 Not Connected 9 22 Before installing the touchscreen driver software check the following for the interface you are using e RS 232 Interface Verify that the supplied RS 232 cable is properly installed between the RS 232 input connector on the monitor and the COM port typically COM2 on the host computer e USB interface Verify that the USB cable is properly installed between the USB input connector on the monitor and a USB port on the host computer e Verify that the COM port communication rate matches the touchscreen controller communication rate which is factory set at
32. ellautomation com certification overview page room environment which uses some form of power isolation from the public low voltage mains Some computer configurations may not comply with the EN 61000 3 2 Harmonic Emissions standard as specified by the EMC Directive of the European Union Obtain permission from the local power authority before connecting any computer configuration that draws more than 75 W of AC power directly from the public mains ATTENTION This monitor is intended to operate in an industrial or control Rockwell Automation Publication 6176M UM001D EN P December 2012 Installation Chapter 2 Installation Guidelines Follow these guidelines to make sure your monitor provides safe and reliable service lt 30 from Vertical The installation site must have sufficient power ATTENTION To maintain an electrically safe installation the AC powered monitors must be plugged into a grounded outlet The enclosure must allow sufficient space around air inlets and outlets to provide the circulation necessary for cooling See Mounting Clearance Requirements on page 14 for further information Never allow air passages to become obstructed The ambient air temperature must not exceed the maximum operating temperature specified in Table 13 on page 42 Consider heat produced by other devices in the enclosure You may need a user supplied fan heat exchanger or air conditioner to meet this condition TIP Hot a
33. esses functions to select standard RGB levels manually adjust RGB levels or set the color temperature Image Accesses functions to auto adjust the display settings or manually adjust the horizontal and vertical image position frequency phase and width level Tools Accesses functions to adjust the OSD reset factory settings Exit Exits the OSD main menu Rockwell Automation Publication 6176M UM001D EN P December 2012 29 Chapter3 Display Configuration Signal Selection Menu Signal Selection wl VGA DVI Back Table 4 Signal Selection Menu Description Icon Function VGA analog input Displays the incoming VGA analog signal from the 15 pin VGA input connector DVI digital input Displays the incoming DVI digital signal from the DVI input connector Back Returns to the OSD main menu Brightness and Contrast Menu Brightness Contrast Back Table 5 Brightness and Contrast Menu Description Icon Function Value Range Brightness Adjusts the brightness of the screen 0 100 Contrast Adjusts the contrast of the screen 0 100 Back Returns to the OSD main menu TIP The more common way to adjust brightness is to use the Up Down buttons on the back of the monitor See page 26 for further information I 30 Rockwell Automation Publication 6176M UM001D EN P December 2012 Color Menu Display Configuration Chapter 3 Manual Temperature Temperature Submenu Back
34. ing 35 replacing line cord 35 monitor type 25 Index monitors brightness adjustment 26 catalog numbers 10 features 9 installation 11 native resolution 25 OSD buttons 26 plug and play device 25 mounting clearances 14 native resolutions 25 navigation 28 0 on screen display OSD 26 OSD on screen display buttons 26 factory reset 33 horizontal and vertical position 33 lockout 26 menus 28 timer for exiting OSD 33 OSD menus navigation 28 P parts list 10 plug and play device 25 resolution 25 S ScreenSet utility 27 self test 37 setup automatic 27 OSD menus 28 setup utility 27 specifications general 41 T touchscreen interface 43 RS 232 43 setup 43 USB 43 troubleshooting 37 self test 37 table 38 Rockwell Automation Publication 6176M UM001D EN P December 2012 47 Index Notes 48 Rockwell Automation Publication 6176M UM001D EN P December 2012 Index Notes Rockwell Automation Publication 6176M UM001D EN P December 2012 49 Index Notes 50 Rockwell Automation Publication 6176M UM001D EN P December 2012 Rockwell Automation Support Rockwell Automation provides technical information on the Web to assist you in using its products At http www rockwellautomation com support you can find technical manuals technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these to
35. ir rises The temperature at the top of the enclosure is often higher than the temperature in other parts of the enclosure especially if air is not circulating IMPORTANT The monitor can operate at a range of extremes However the life span of any electronic device is shortened if you continuously operate the monitor at its highest rated temperature The humidity of the ambient air must not exceed limits specified in Table 13 on page 42 and must avoid condensation In dry environments static charges build up easily Proper grounding of the equipment through the AC power cord helps to reduce static discharges which may cause shocks and damage electronic components The enclosure or cover must remain in place at all times during operation The cover provides protection against high voltages inside the monitor and inhibits radio frequency emissions that might interfere with other equipment For VESA mounting the installation must provide sufficient mechanical stability to minimize the effects from vibration and shock The mounting means must be firmly attached to the supporting surface with the appropriate hardware When mounted the monitor cannot be tilted more than 30 from vertical lt 30 from Vertical Rockwell Automation Publication 6176M UM001D EN P December 2012 13 Chapter2 Installation Required Tools Mounting Clearance Requirements 14 These tools
36. n 6176M UM001D EN P December 2012 Chapter 4 Perform Routine Maintenance Ch apter Objective This chapter describes how to clean the monitors replace a line cord and perform other routine maintenance Clean the Monitor Occasionally clean the display panel and cabinet with a soft cloth dampened not soaked with a mild non abrasive glass cleaner Keep turning a fresh side of the cloth towards the screen surface to avoid scratching it with accumulated grit Displays and touch screens are resistant to the following chemicals e Ethyl alcohol e Methyl alcohol e Cleaning naphtha e Commercial glass cleaners e Ammonia in 10 diluted solution IMPORTANT Apply the solvent only to the cloth and not directly on the monitor screen Do not use paper products as they may scratch the surface To minimize the risk of abrasion allow the screen to air dry ATTENTION You can use alcoholic or ammonia cleaners to clean the polycarbonate shield or a touchscreen However use only one or the other at all times A residue mixture can cause a chemical reaction Be careful when cleaning a touch screen shield that is installed over the screen Abrasive and certain chemical cleaners can easily damage the surface Cat No Description 6189V SCRNCOVER15 15 Screen Cover for flat front bezels 6189V SCRNCOVER17 17 Screen Cover for flat front bezels Replace a Line Cord To avoid shock and fire hazards replace the monitor s power cord if the
37. n 6176M UM001D EN P December 2012 17 Chapter2 Installation Figure 2 Rack Mounting a 1950M Monitor the front opening of an ElA rack cabinet are either wide or universal e Wide rails have holes spaced 12 7 mm 0 5 in and 31 8 mm 1 25 in on centers in a repeating pattern Wide rails are prevalent in Europe e Universal rails have holes spaced 12 7 mm 0 5 in 15 9 mm 0 625 in and 31 8 mm 1 25 in on centers in a repeating pattern The universal rails have a hole pattern that contains the wide pattern but provides an additional hole at the midpoint of the pattern Universal rails are prevalent in the United States f ATTENTION The mounting rails that run vertically along the inside edges of VESA Mounting Use the optional bench tabletop adapter for monitors catalog number 6189V MBA to mount your VESA monitor on a bench or tabletop VESA Mounting Guidelines Observe these guidelines when installing the VESA monitor on an arm e The mounting surface and the mounting arm must be strong enough to support both the monitor and the mounting hardware e The interface between the arm and the monitor must meet VESA FPMPMI 100 mm 3 94 in standards e The mounting location must provide adequate clearance for positioning and moving the adjustable unit and for routing cables 18 Rockwell Automation Publication 6176M UM001D EN P December 2012
38. n image Image lock is not properly adjusted Reset the horizontal positioning using the appropriate OSD menu Display is present but bars appear across it or roll through it Eliminate ground loops by connecting the monitor and computer to the same power source location or installing an ac isolation transformer Picture bounces or has wavy oscillations Picture has blurry streaks or ghosting to the right of objects on the screen Verify that the refresh frequency rate is set to 60 Hz Access the Control Panel gt Displays gt Settings then click the Advanced button and the Monitors tab Adjust the contrast settings using the appropriate OSD menu Images are too bright or too dark Adjust the brightness and contrast settings using the appropriate OSD menu Brightness issues that cannot be corrected can be the result of a poor video signal output from the video source Image is not stable The video mode may be out of range Change to the native resolution Check for proper video cable installation Replace the suspected faulty cable Screen jitter or noisy video The video mode may be out of range Change to the native resolution Check for proper video cable installation Replace the suspected faulty cable Reroute the cables or replace suspected faulty cables Check the host computer and monitor grounding Image is dim even with brightness and contrast controls set to highest level Check
39. nclosure that is suitably designed or rated for those specific environmental conditions that will be present and designed to prevent personal injury resulting from accessibility to live parts UL Listed equipment need not be mounted inside another enclosure in ordinary nonhazardous locations if NEMA Type and IEC ratings are not required but the mounting method must limit the tilt of the product to no more than 30 from vertical The mounting means must be firmly attached to the supporting surface using screws bolts or clamps so the monitor cannot tip All monitors ship with a gasketed bezel to meet specified NEMA and IEC ratings only when mounted in a panel or enclosure with an equivalent rating Subsequent sections of this publication may contain additional information regarding specific enclosure type ratings that are required to comply with certain product safety certifications In addition to this publication see the following e Industrial Automation Wiring and Grounding Guidelines publication 1770 4 1 for additional installation requirements e NEMA Standard 250 and IEC 60529 as applicable for explanations of the degrees of protection provided by enclosures European Union Directive This monitor meets the European Union Directive requirements when installed within the European Union or EEA regions and have the CE mark A copy of the declaration of conformity is available at the Rockwell Automation website at http www rockw
40. of technical documentation contact your local Allen Bradley distributor or Rockwell Automation sales representative Rockwell Automation Publication 6176M UM001D EN P December 2012 7 Preface Notes 8 Rockwell Automation Publication 6176M UM001D EN P December 2012 Chapter 1 Monitor Features Ch apter Objectives This chapter covers the following topics e Monitor Overview e Monitor Options e Before You Begin e Parts List Monitor Overview Standard industrial monitors provide the latest in LCD flat panel technology Combine these monitors with an industrial non display computer or any computer to create a visualization maintenance control or information computing solution Standard industrial monitors offer the following features e 15 17 and 19 inch displays e VESA and panel mount options e Active matrix TFT display e Native display resolutions from 1024x768 to 1280x1024 e Wide viewing angles e Optional RS 232 or USB touchscreen interface e USB hub for external devices such as keyboard and mouse e One button screen auto adjust e OSD controls with lockout feature e Input power adapter AC models e Space efficient chassis that is less than 58 mm 2 3 in deep e Optional bench mount adapters for VESA mount monitors Rockwell Automation Publication 6176M UM001D EN P December 2012 9 Chapter1 Monitor Features Monitor Options This table summarizes th
41. ollow these directions to connect the touchscreen interface 1 For units with the touchscreen option connect one end of the included touchscreen serial cable to the RS 232 port connector on the monitor 2 Connect the other end of the cable to a serial port on the host computer 3 Tighten the captive screws on the cable connector to secure it Connect the USB and Optional USB Touchscreen Interface The USB Type A connection to the host computer is used to connect USB devices and the optional USB touchscreen interface to the host computer Description 6189V TCHCBL2 Serial touch cable RS 232 cable 1 8 m 6 ft 6189V USBCBL2 USB USB touch cable Type A to Type B 1 8 m 6 ft Rockwell Automation Publication 6176M UM001D EN P December 2012 21 Chapter2 Installation Follow these directions to connect the touchscreen interface 1 Connect the USB Type A male connector on the included USB cable to the USB Type A female connector on the monitor 2 Connect the USB Type B male connector on the USB cable to the USB Type B female connector on the host computer USB Type B Male Connector of USB Cable USB Type A Male a SS a ri Connector of USB Cable Install the
42. ols You can also visit our Knowledgebase at http www rockwellautomation com knowledgebase for FAQs technical information support chat and forums software updates and to sign up for product notification updates For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit http www rockwellautomation com support Installation Assistance If you experience a problem within the first 24 hours of installation review the information that is contained in this manual You can contact Customer Support for initial help in getting your product up and running United States or Canada 1 440 646 3434 Outside United States or Canada Use the Worldwide Locator at http www rockwellautomation com support americas phone_en html or contact your local Rockwell Automation representative New Product Satisfaction Return Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures United States Contact your distributor You must provide a Customer Support case number call the phone number above to obtain one to your distributor to complete the return process Outside United States
43. ons so metal cuttings do not enter components already installed in the panel e Supporting panels must be at least 14 gauge to be sure of proper sealing against water and dust and to provide proper support The mounting hardware supplied accommodates panels up to 6 25 mm 0 25 in thick ATTENTION Failure to follow these guidelines may result in personal injury or damage to the panel components Mount the Monitor in a Panel Follow these steps to mount the monitor in a panel 1 Cut the panel opening using the appropriate cutout dimensions 2 Attach cables to the monitor before installing if rear access to the monitor is limited after installation See Monitor Connections on page 19 for where to attach cables 3 Verify that the sealing gasket is properly positioned on the monitor This gasket forms a compression type seal Do not use sealing compounds 4 Place the monitor in the panel cutout 5 Slide the mounting clips into the slots on the top bottom and sides of the monitor 6 Hand tighten the clips in the sequence shown in Figure 1 until the gasket is compressed uniformly against the panel Figure 1 Tightening and Torque Sequence Q D ST amp NS G k 9 Ni 1550M and 1750M Monitors 1950M Monitors Sao XO 16 Rockwell Automation Publication 6176M UM001D EN P December 2012 Installation Chapter 2 7 Tighten the mounting clips to a torque of 1
44. ors 309 0x410 0x50 0mm 356 0x452 0x53 0mm 399 3x482 6x58 0mm 12 2 x 16 1 x 2 0 in 14 0x 17 8 x 2 1 in 15 7 x 19 0 x 2 3 in VESA mount monitors 282 6 x 383 6x50 0mm 326 5x421 0x53 0mm 357 0x444 0x58 0mm 11 0x 15 0 x 2 0 in 12 9 x 16 6 x 2 1 in 14 1x 17 5 x 2 3 in Weight Panel mount monitors 4 1 kg 9 02 Ib 5 7 kg 12 54 Ib 7 5 kg 16 50 Ib VESA mount monitors 3 1 kg 6 82 Ib 4 6 kg 10 12 Ib 6 0 kg 13 20 Ib Rockwell Automation Publication 6176M UM001D EN P December 2012 41 AppendixA Specifications Table 12 Electrical Attribute 1550M Models 1750M Models 1950M Models Input voltage AC 90 264V autoranging DC 12V power adapter required Line frequency 47 63 Hz Power consumption 2Aat24W 3Aat36W 3 5 Aat42W Table 13 Environment Attribute 1550M 1750M 1950M Models Temperature Operating 0 45 C 32 113 F Nonoperating 20 60 C 4 140 F Relative humidity 10 90 noncondensing Shock Operating 15 g 1 2 sine 11 ms Nonoperating 20 g 1 2 sine 11 ms Shock Operating 15 g 1 2 sine 11 ms Nonoperating 20 g 1 2 sine 11 ms Vibration Operating 0 015 in p p 10 53 Hz 1 0 g peak 53 640 Hz Nonoperating 0 015 in p p 10 53 Hz 2 0 g peak 53 640 Hz Enclosure ratings 1 Applies only to panel mounted monitors Table 14 Certifications 1550M 1750M 1950M Models NEMA Type 4 12 IEC IP66 e C Tick e CE
45. r table provides the pin numbers and corresponding pin assignments for the supported video connectors Each connector is female E en ea ca En c e 8 T Q 9 10 111 12 13 1114 15 16 17 18 19 1201 121 22 23 24 O J Table 16 Standard DVI Video Cable Pin DVI Port Pin DVI Port 1 DATA2 13 Not used 2 DATA2 14 DVI power 5V 3 DATA 2 4 shield 15 Ground 4 Not used 16 Hot plug detect 5 Not used 17 DATAO 6 DDC clock 18 DATAO 7 DDC DATA 19 DATA 0 shield 8 Not used 20 Not used 9 DATA1 21 Not used 10 DATA1 22 Clock shield 11 DATA 1 3 shield 23 Clock 12 Not used 24 Clock Rockwell Automation Publication 6176M UM001D EN P December 2012 A auto calibration 27 automatic setup 27 brightness adjustment 26 brightness and contrast OSD on screen display menu 33 using monitor buttons 26 C cables 45 DVI video connector 46 HD 15 video connector 45 catalog numbers 10 cleaning 35 connections analog video source 20 D DVI video connector 46 F factory reset 33 features 9 functional ground screw lug usage 23 HD 15 video connector 45 installation environment and enclosure notice 12 functional ground connection 23 guidelines 13 mounting clearances 14 secure cables 23 M maintenance 35 clean
46. rface cable for touch enabled monitors 10 Rockwell Automation Publication 6176M UM001D EN P December 2012 Chapter 2 Installation Ch apter Objectives This chapter provides pre installation information and procedures to mount the monitor and make connections The chapter covers the following topics Installation Precautions Installation Guidelines Required Tools Mounting Clearance Requirements Monitor Dimensions Install the Monitor Monitor Connections Connect Power Functional Ground Screw Secure Cables Review each mounting type and the monitor dimensions before installation Rockwell Automation Publication 6176M UM001D EN P December 2012 11 Chapter2 Installation Installation Precautions Read and follow these precautions before installing the monitor Environment and Enclosure Information environment in overvoltage Category II applications as defined in IEC 60664 1 at altitudes up to 2000 m 6561 ft without derating This monitor is considered Group 1 Class A industrial equipment according to IEC CISPR 11 Without appropriate precautions there may be potential difficulties ensuring electromagnetic compatibility in other environments due to conducted as well as radiated disturbance i ATTENTION This monitor is intended for use in a Pollution Degree 2 industrial This monitor is supplied as open type equipment UL recognized and hazardous location equipment must be mounted in an e
47. ssumed by Rockwell Automation Inc with respect to use of information circuits equipment or software described in this manual Reproduction of the contents of this manual in whole or in part without written permission of Rockwell Automation Inc is prohibited Throughout this manual when necessary we use notes to make you aware of safety considerations WARNING Identifies information about practices or circumstances that can cause an explosion in a hazardous environment which may lead to personal injury or death property damage or economic loss ATTENTION Identifies information about practices or circumstances that can lead to personal injury or death property damage or economic loss Attentions help you identify a hazard avoid a hazard and recognize the consequence SHOCK HAZARD Labels may be on or inside the equipment for example a drive or motor to alert people that dangerous voltage may be present BURN HAZARD Labels may be on or inside the equipment for example a drive or motor to alert people that surfaces may reach dangerous temperatures gt eee IMPORTANT Identifies information that is critical for successful application and understanding of the product Allen Bradley Rockwell Software Rockwell Automation and TechConnect are trademarks of Rockwell Automation Inc Trademarks not belonging to Rockwell Automation are property of their respective companies New and Updated Inform

Standard Industrial Monitors User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents