Home

TM-T20II Software User`s Manual - Epson America, Inc.

1. Click the Ethernet button When printer is already networked Proceed to Step 7 When using Ethernet Click the Run EpsonNet Config button and configure the printer s network setting using the EpsonNet Config Lx See Network Address Setting for Ethernet Printer on page 18 When configuring the network setting after Proceed to Step 7 installing the driver Note When the EpsonNet Config is not installed the Cannot start EpsonNet Config Do you want to install it now message appears Click the Yes button to install it 15 TM T20II Software Installer Software User s Manual Installation E EPSON TM T20II Software Installer Ver I Communication Port Settings Select an interface and configure its communication settings IP Address F Loo Ji If you want to configure the IP address of the printer dick the Run EpsonNet Config button Configure the IP address of the printer on IP Address and then click the Next button Proceed to Step 8 When configuring the network setting after installing the driver assign the printer driver port IP address you configure here to the printer or change the printer driver port IP address to the one that will be set to the printer 8 The Start Installation screen appears The driver and utility to be installed are listed L Advanced Printer Driver Ver 5 xx Ld TM T20II Utility Ver x xx L EpsonNet Config Ver x xx Only for Ethernet connection L EpsonN
2. TM I20I1 Software User s Manual M00068500 EN TM T20II Software Installer Software User s Manual Cautions and Trademarks Cautions and Trademarks Cautions L No part of this document may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Seiko Epson Corporation L The contents of this document are subject to change without notice Please contact us for the latest information L While every precaution has taken in the preparation of this document Seiko Epson Corporation assumes no responsibility for errors or omissions L Neither is any liability assumed for damages resulting from the use of the information contained herein L Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages losses costs or expenses incurred by the purchaser or third parties as a result of accident misuse or abuse of this product or unauthorized modifications repairs or alterations to this product or excluding the U S failure to strictly comply with Seiko Epson Corporation s operating and maintenance instructions L Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved
3. Uninstalling the Windows Printer Driver Caution Do not delete the printer driver in Start Control Panel Hardware and Sound Printers Z See Differences Depending on the OS on page 9 Even though the icon the printer driver disappears from the screen the printer driver is not uninstalled 1 Quit all applications running on the computer 36 TM T20II Software Installer Software User s Manual Installation Select Start Control Panel Uninstall a program EPSON Advanced Printer Driver for TM T20II Ver 5 and click Uninstall The uninstallation confirmation screen appears Click the Yes button The Advanced Printer Driver Ver 5 is uninstalled EPSON Advanced Printer Driver Ver 5 a a Warning All unfinished print jobs will be deleted during the uninstall WE Do you want to uninstall EPSON Advanced Printer Driver for TM T200 O Veg 4 The uninstallation confirmation screen for model specific utility is displayed Click Yes when not using the model specific utility with other drivers and applications Click No when not uninstalling The Advanced Printer Driver Ver 5 utility is uninstalled EPSON TM T200 Utility InstallShield Wizard Do you want to completely remove the selected application and all of its features The Uninstallation Complete screen is displayed Uninstallation is complete after clicking Finish Uninstalling the TM T20IlI Utility 1 Quit all applications running o
4. NET Environment Print the 80mm width layout with 58mm width Note For detail see Advanced Printer Driver Ver 5 Printer Manual 54 TM T20II Software Installer Software User s Manual TM T20I1 Utility TM T20II Utility This chapter explains how to use the TM T20II Utility that configures this printer Overview Caution While saving the settings do not turn off the printer or terminate the connection with the printer TM T20II Utility provides the following functions For general users L Operation Check 9 See Operation Check on page 63 i Electronic Journal 2 3 L Storing Logos 3 See Storing Logos on page 64 1 Coupon Settings 25 L Paper Reduction lt 3 See Paper Reduction Settings on page 70 L Automatic Paper Cut F See Automatic Paper Cut Settings on page 71 For printer administrators Printing Control lt 3 See Printing Control Settings on page 73 Font lt gt See Font Settings on page 75 Buzzer Settings 3 See Buzzer Settings on page 76 Communication I F lt 3 See Communication I F Settings on page 77 O LL OU LL Setting Backup Restore lt 3 See Setting Backup Restore on page 80 1 Cannot be used on Windows 2000 2 If the coupon driver or Epson TM Virtual Port DriverVer 8 is not installed this is disabled 3 For details refer to the TM T20II Utility User s Manual Starting the TM T20II Utility
5. Starting the TM T20Il Utility Activate the TM T20I Utility as follows 55 TM T20II Software Installer Software User s Manual TM T20I1 Utility If you have checked Run TM T20II Utility at Step 10 of Easy Install procedure start from Step 2 1 Select Start All Programs EPSON TM T20II Software TM T20II Utility The following screen appears Select the printer to use and click the OK button If you wish to change the language that appears in the TM T20I Utility click the Select Language button If the printer is not displayed click the Add Port button Then go to the following section 9 See Adding a Communication Port and Starting the TM T20II Utility on page 57 TM T20II Utility Select Printer and Click 0K Button If the port to which the printer is connected is not listed add it by dicking the Add Port button Model Interface type Port Information TM T 2011 USB 001 Add Port Delete Port Select Language selecte English Note LI Click the Add Port button when you want to newly configure a port of the printer T See Adding a Communication Port and Starting the TM T20I Utility on page 57 L To delete a port select the port and click the Delete Port button The TM T20II Utility is started When the communication with the printer is established the printer settings obtained from the printer are displayed in the Printer settings screen To recognize the connected
6. _J Parallel 58 TM T20II Software Installer Software User s Manual TM T20I1 Utility Setting Port Description Selects the parallel port of the computer you use Search Searches for available parallel ports Virtual Port Settings Starts the Virtual Port Settings tool For details see the manual for the Virtual Port Settings tool Communication test Runs a communication test _J USB Setting Description Port Selects the USB port you use Search Searches for the available USB port s Communication test Runs a communication test Note If connected via USB printers cannot be added under the environment where both Printer Class printers and Vendor Class printers exist In such a case first turn off the existing printers and then start the utility _J Ethernet Setting Description IP Address Configures the IP address of the printer you use Search Searches for the TM T20ll printers on the network and displays their IP addresses Advanced settings EpsonNet Config Activates the EpsonNet Config Make the network settings of the printer using the EpsonNet Config Communication test Runs a communication test Note If no TM T20II with its IP address configured is displayed even after clicking the Search button enter the IP address of TM T20II directly to IP Address 59 TM T20II Software Installer Software User s
7. Click the Install button to start the installation The Installation Complete screen appears Click the Done button If a message to ask you to restart the computer appears select No I will restart my system myself 30 TM T2O0II Software Installer Software User s Manual Installation When the installation is completed the Installation Finished screen appears Then click the Finish button to end the installation E EPSON TM T20I Software Installer Ver PI Installation Finished The installation of the software has finished The installation of the following software was executed JavaPOs ADK Ver Please run a printing test for the Advanced Printer Driver if necessary ea Please set up the printer if necessary C Run TM T2011 Utility This is the end of the JavaPOS ADK installation Installing the Utility The utility can also be installed with Easy Install on the TM T20II Software amp Documents Disc Easy Install installs TM T20I Utility for a serial or USB connection and for an Ethernet it installs TM T20II Utility EpsonNet Config and EpsonNet Simple Viewer Custom Install allows you to select utilities you want to install from the following Ld TM T20II Utility Ver x xx L Coupon Generator L EpsonNet Config Ver x xx L EpsonNet Simple Viewer Ver x xx L Epson TM Virtual Port Driver Ver x xx Follow the steps below to execute the utility installation 1 Insert the TM T20II Softw
8. Electronic Journal Enable electronic journal Open 63 TM T20II Software Installer Software User s Manual TM T20I1 Utility Click the button of the item you want to check You can check the followings _J Unit Test Setting Description Communication Test Checks if the communication between the computer and the printer is normal Test Printing Makes a test print To see if the printer prints correctly Print Logo Prints the logo stored on the printer Print Font Prints the fonts installed on the printer Open Drawer Opens the drawer connected to the printer Test Buzzer Sounds an external optional buzzer that is connected to the printer J Driver Test Setting Description Select the driver to test Selects the driver you want to check Test Printing Makes a test print To see if the printer prints correctly Note For Windows 2000 the Test Printing is not available L Electronic Journal Setting Description Enable electronic journal Sets electronic journal Enable Disable This is activated when ticked Open Displays the electronic journal screen Storing Logos Allows you to configure the logos to be stored on the printer 64 TM T20II Software Installer Software User s Manual TM T20I1 Utility This section describes how to configure logos to be stored on the printer The utility allows you to print your logo already stored on the printer but you cannot e
9. Products by Seiko Epson Corporation Trademarks EPSON and ESC POS are registered trademarks of Seiko Epson Corporation in the U S and other countries MS DOS Microsoft Win32 Windows Windows Vista Visual Studio Visual Basic Visual C and Visual C are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries ESC POS Command System EPSON ESC POS is a proprietary POS printer command system that includes patented or patent pending commands ESC POS is compatible with all types of EPSON POS printers and displays excluding the TM C100 printer ESC POS is designed to reduce the processing load on the host computer in POS environments It comprises a set of highly functional and efficient commands and also offers the flexibility to easily make future upgrades Copyright 2013 Seiko Epson Corporation All rights reserved TM T20II Software Installer Software User s Manual Cautions and Trademarks For Safety Key to Symbols The symbols in this manual are identified by their level of importance as defined below Read the following carefully before handling the product N Caution Provides information that must be observed to avoid damage to your equipment or a malfunction Note Provides important information and useful tips Restriction of Use When this product is used for applications requiring high reliability safety such as
10. Simple Viewer User s Manual Differences Depending on the OS The content of the descriptions of some operations in this book may be different depending on the OS See the following Item Description Screens shown Screens in Windows 7 are used for the descriptions in this manual Confirmation and setting of the printer driver Starting the TM T20II Utility Windows 8 Desktop Sidebar Settings Control Panel Hardware and Sound Devices and Printers Windows 7 Start Control Panel Hardware and Sound Devices and Printers Right click the printer driver and select the Printer properties Windows Vista Start Control Panel Hardware and Sound Printers Right click the printer driver and select the Properties Windows XP Start Control Panel Printers and Faxes Right click the printer driver and select the Properties Windows 2000 Start Settings Control Panel Printers Right click the printer driver and select the Properties Windows 8 Start All apps EPSON TM T20Il EPSON TM T20I Utility Windows 7 Start All Programs EPSON TM T20II Software TM T20II Utility Windows Vista Start All Programs EPSON TM T20II Software TM T20II Utility Windows XP Start All Programs EPSON TM T20II Software TM T20II Utility TM T20II Software Installer Software User s Manual Overview Item Description Uninstall a program Windows 8 Desktop Sideba
11. TMInstallNavi exe icon in the printer driver CD The License Agreement screen appears Read the content and select the I accept the terms in the license agreement Then click the Next button 22 TM T20II Software Installer Software User s Manual Installation The Select Installation Type screen appears Click the Custom Install button 4 The Select Software screen appears Check the items you want to install from the list After this step follow the installation procedure for each item E EPSON TM T200 Software Installer Ver 0 Select Software Select the software you want to install p 1 0 Advanced Printer Driver Ver if Sample and Manual OPOS ADK far MET Ver e JavaPOS ADK Ver TM T201 Utility Ver Coupon Generator EpsonNet Config Ver EpsonNet Simple Viewer Ver TM Virtual Port Driver Ver HDD Used Space E MB lt Back Next gt Cancel Installing the Printer Driver The printer driver can also be installed with Easy Install in the TM T20I Software amp Documents Disc Easy Install installs all items of the printer driver and Custom Install allows you to select items you want to install from the following _J Advanced Printer Driver Ver 5 L Sample and Manual Under Windows 2000 the Sample is not available Only the Manual is available Follow the steps below to execute the printer driver installation 1 Insert the TM T20II Software amp Docume
12. Ver 5 Printer Manual 5 APDS Utility Ver mm Logo 57 5 Dots Layout i i Width 35 7 mm Height 20 3 mm Barcode UPC A Element Width 3 2 6 Dots Element Height 162 1 255 Dots HRI Position Do not print x 2 dimensional symbol Type Electronic Journal Coupon Settings User Defined Paper HRI Font Printing Control FontA Optional Buzzer T Composite Font Replacement Paper Size 80mm Options Send command Rotation yee Use the printer settings _ Add Quiet Zone T Always print with image barcode Hex Input Mode Test Printing 012345678905 Run Specify a barcode font to barcode data using the application Barcode is printed based on the settings of the APD5 utility 2 dimensional symbol Printing It sets a 2 dimensional symbol font to APD5 The 2 dimensional symbol printing is possible for the customer without implementing the 2 dimensional symbol encoder or preparing a 2 dimensional graphic data in an application 51 TM T20II Software Installer Software User s Manual Using the Printer Driver 2 dimensional font can be set from 2 dimensional symbol of the APD5 utility For detail see Advanced Printer Driver Ver 5 Printer Manual APD5 Utility Ver 1 00 Logo Layout Barcode 2 dimensional symbol Electronic Journal Coupon Settings User Defined Paper Printing Control Optional Buzzer Font Replacement Sen
13. by the drivers or ESC POS commands Driver Printer Driver This is an Windows driver APD EPSON Advanced Printer Driver which allows you to control POS operations such as printing logos and barcodes controlling paper cutting function and cash drawer See this manual for more details about the printer driver The driver includes Status API which allows you to monitor the printer status and to send the ESC POS commands See the following manuals and sample programs provided with EPSON Advanced Printer Driver Ver 5 for further details on using the driver and how to develop an application using the Status API functions L Install Manual L Printer Manual L Printer Specification for TM T20II E Status API Manual UPOS This stands for Unified Point of Service It is the standard specification of POS market which defines drivers for controlling POS peripheral devices in various operation environments Using the driver you can develop POS system efficiently because you do not need to newly create commands The following TM T20I drivers that conform to UPOS are provided Use one of them in accordance with your system environment L EPSON OPOS ADK Suitable for an application that operates the printer under 32 bit version of Windows LI EPSON OPOS ADK for NET Suitable for an application that operates the printer under Windows NET environment LJ EPSON JavaPOS ADK for Windows Suitable for an application that operates the printer u
14. of Epson support website is displayed E EPSON TM T20II Software Installer Ver I E Support Information Opens the EPSON support website Connect to the Internet and then select your region of residence Europe Middle East Africa Asia Oceania From this website you can download the latest drivers utilities and manuals for EPSON point of sales products North America Latin America If you are a customer from North Central or South America please visit the EPSON America Inc site Cancel 12 TM T20II Software Installer Software User s Manual Installation Installation This chapter describes how to install the printer drivers and conduct a test print after the installation The uninstallation procedure is also provided cy See Uninstallation on page 36 N Caution L Install with administrator privileges L Close all running applications before the installation L Ifyour printer is a serial type and your OS is Windows 2000 you can not install Advanced Printer Driver using the installer So refer to x Adding a printer to a Windows2000 PC on page 33 and install Advanced Printer Driver stallation Types You can select the installation type from the following Lj Easy Install 7 See Easy Install on page 13 This is a standard installation which installs the TM T20I printer driver and TM T20II Utility If you are using an Ethernet EpsonNet Config and Epson
15. printer Automatic Paper Cut Settings Allows you to configure whether to cut paper and print a logo when the cover is closed 71 TM T20II Software Installer Software User s Manual TM T20I1 Utility N Caution LI Ifyou set a logo here the logo will be printed when you print coupons too LI Ifyou don t want to print the logo on coupons set the logo printing during auto cut in coupon printing For details refer to the TM T20II Utility User s Manual Configure as follows 1 Click the Automatic Paper Cut menu Click the item you want to check Automatic Paper Cut Settings Not use this function 0 Cut paper when the cover is dosed 0 Print logo when paper is cut Not use this function Disables the automatic paper cut function Go to Step 4 Cut paper when the cover is closed Executes automatic paper cut when the cover is closed Go to Step 4 Print logo when paper is cut Prints the logo when executing the automatic paper cut Go to Step 3 72 TM T20II Software Installer Software User s Manual TM T20I1 Utility Configure the Print logo when paper is cut Automatic Paper Cut Settings i Not use this function 0 Cut paper when the cover is dosed Print logo when paper is cut Key code Alignment P ci RR PN III qur etnar Top Logo 32 32 i EUS Bottom Logo None m ABCDEFGHIJKLMN Condition When paper is cut by command 7 When cover is dos
16. printer when connected via USB run the Test Printing after running TM T201 Utility or check the serial number on one of the sides of the printer and the serial number of TM T20II Utility When executing TM T20II Utility for the first time it does not boot if the communication with the printer cannot be established Once the communication is established the utility can boot using the previous printer setting information even if it is offline 56 TM T20II Software Installer Software User s Manual TM T20I1 Utility 1M T201 Utility Ver 5 Current Settings Current Settings Operation Check i The number of stored logos 1 Storing Logos Memory usage 0 KB Total 256 KB Coupon Settings Sn Po mot print f p Reduction Settings Disabled Paper Reduction zi Automatic Paper Cut Settings Disabled Automatic Paper Cut Printing Control Settings Paper Width and Column 80mm 48 columns Print density 100 Advanced Font Settings Code page PC437 USA Standard Europe Printing Control International character set USA Font Optional Buzzer Settings Enabled Communication 1 F Settings Interface USB ESDPRTD02 Optional Buzzer s type USB Printer Class Communication 1 F Backup Restore T T200 iE Eni le Port USB 001 Adding a Communication Port and Starting the TM T20II Utility Add a communication port as follows Select Start All Programs EPSON TM T20II Software TM T20II Utili
17. the content and select the I accept the terms in the license agreement Then click the Next button The Select Installation Type screen appears Click the Easy Install button d EPSON TM T20II Software Installer Ver I E Select Installation Type Select Easy Install or Custom Install by clicking the appropriate button Easy Install Installs Advanced Printer Driver and Utility Ti Windows Custom Install Select the software you want to install from the list Advanced Printer Driver Utility OPOS ADK etc 4 The Communication Port Settings screen appears The setting varies depending on the connection method Select the port to connect the printer Serial connection Proceed to Step 5 USB connection Click the USB port button and then click the Next button Proceed to Step 8 Ethernet connection Proceed to Step 6 14 TM T20II Software Installer Software User s Manual Installation qj EPSON TM T20II Software Installer Ver I E Communication Port Settings Select an interface and configure its communication settings Ethernet usBport Serial port USB Port is assigned automatically Click the Serial port button Configure the communication settings then click the Next button Proceed to Step 8 Select the COM port Bits per second Data bits Parity and Stop bits Note The driver s serial communication setting should be the same as that of the printer
18. Configures the halftone setting of the image Brightness Configures the brightness of the image Density Configures the printing concentration 4 If the logo mode is First Key code Selection Mode and Automatically set the keycode for the logo to be stored is not turned on the Key code Settings screen is displayed Set a Key code and click the OK button If the logo mode other than First Key code Selection Mode is selected or Automatically set the keycode for the logo to be stored is turned on the Key code Settings screen is not displayed 2 i Key code Settings x Set the followme key code for the logo to be stored Enter other numbers H you want to change the key code Automatically cet the key oode for the loga to be shored The logo data is added on the list When storing multiple logo data repeat Step 1 through 4 68 TM T20II Software Installer Software User s Manual TM T20ll Utility 6 After storing all the logo data to be added to the printer check the indicator on the right side of the screen to see if the data size is acceptable to be stored on the printer and then click the Store to Printer button Storing Logos First Key code Selection Mode Image File Add EPSON png Edit Delete Preview Test print Change Logo Mode Additional logo size 13KB Used amount 0 KB 256 KB Key code Management Scaling Alignment Left r m Store to Printer The logo data is stored to th
19. Disabled Printing Control Settings Paper Width and Column 80mm 48 columns Print density Depending on the DIP switch settings Font Settings Code page PC437 USA Standard Europe International character set USA Optional Buzzer Settings Enabled Communication I F Settings Interface type USB ESDPRTO02 USB Printer Class Details Setting Description Storing Logos Displays the number of stored logos and their sizes Coupon Settings Displays the coupon settings Paper Reduction Settings Displays the paper reduction Enable Disable setting Automatic Paper Cut Settings Displays the settings of the automatic paper cut function Printing Control Settings Displays the paper width and the print density settings Font Settings Displays code page of the printer font and international character set Optional Buzzer Settings Displays the buzzer settings Communication I F Displays the communication setting of the port Details Displays information of interface and maintenance counters Le See Details on page 61 1 If the coupon driver or Epson TM Virtual Port Driver Ver 8 is not installed this won t be displayed Details Interface Information Note When a serial connection is used interface information does not appear only the maintenance counter appears 61 TM T20II Software Installer Software User s Manual TM T20I1 Utility Details Maintenance
20. Manual TM T20I1 Utility 4 The following screen appears again Select the added port and click the OK button TM T20II Utility Select Printer and Click 0K Button If the port to which the printer is connected is not listed add it by dicking the Add Port button The TM T20II Utility is started E TM T2011 Utility Ver m Current Settings Current Settings Operation Check Storing Logos The number of stored logos 1 Storing Logos Memory usage 0 KB Total 256 KB Coupon Settings a Se T Do not print Paper Reduction Settings Disabled Automatic Paper Cut Settings Disabled Paper Reduction Automatic Paper Cut E Printing Control Settings Paper Width and Column 80mm 48 columns Print density 100 Advanced Font Settings Code page PC437 USA Standard Europe Printing Control International character set USA Font Optional Buzzer Settings Enabled Communication 1 F Settings Interface type Serial Optional Buzzer 19200 bps Communication 1 F Backup Restore TM T201 2 00 ESC POS Port COM1 60 TM T20II Software Installer Software User s Manual TM T20I1 Utility Current Settings Allows you to check the printer settings and the maintenance counter Current Settings Storing Logos The number of stored logos 1 Memory usage 0 KB Total 256 Coupon Settings Da nat print Paper Reduction Settings Disabled Automatic Paper Cut Settings
21. Net Simple Viewer are also installed Custom Install lt 3 See Custom Install on page 22 Youcan select printer drivers and utilities you want to install Select this installation type if you want to install the OPOS driver OPOS NET driver JavaPOS driver the printer driver manual and sample programs and tools for developing programs Update mode lt 3 See Update Mode on page 34 If the printer driver and or UPOS is already installed the driver version is displayed and you can select whether to update the driver or not Easy Install N Caution L When installing connect just one printer to the computer Do not connect multiple printers L Turn off the printer and then start the installation Insert the TM T20II Software amp Documents Disc into the computer The TM T20II Software Installer is automatically read and the EPSON TM T20II Software Installer screen appears Click the Install Now button Note The displayed language can be changed from Select language 13 TM T20II Software Installer Software User s Manual Installation When the TM T20I Software Installer is not automatically read double click the TMInstallNavi exe icon in the TM T20II Software amp Documents Disc d EPSON TM T20II Software Installer Ver IE Install Now Manuals Select language TM T201 Copyright C Seiko Epson Corporation 2013 All rights reserved 2 The License Agreement screen appears Read
22. Next button The Port selection screen appears Select the port Click the Next button to start the installation The InstallShield Wizard Complete screen appears Click the Finish button 27 TM T2O0II Software Installer Software User s Manual Installation When the installation is completed the Installation Finished screen appears Then click the Finish button to end the installation E EPSON TM T200 Software Installer Ver 0 Installation Finished The installation of the software has finished The installation of the following software was executed PFOS ADK Ver Please run a printing test for the Advanced Printer Driver if necessary rr Boiss Je Please set up the printer if necessary C Run TM T2011 Utility This is the end of the OPOS ADK installation Installing the OPOS ADK for NET Note To install the OPOS ADK for NET Microsoft NET Framework and Microsoft POS for NET are required Install Microsoft NET Framework and Microsoft POS for NET Ver 1 11 beforehand Insert the TM T20II Software amp Documents Disc into the computer and follow the steps Z See Displaying the Select Software Screen on page 22 Select the OPOS ADK for NET Ver x xx x Clear the check box for the items you do not want to install Click the Next button The Start Installation screen appears The driver and utility to be installed are listed Click the Install button to start the installation In
23. Print to the following port s Documents will print to the first free Print to the following port s Documents will print to the first free checked port checked port Port Description Printer a5 Port Description Printer cz mo p ip A oe i pa gt USBOOI Virtual printer port for USB Receipt fe EPSOM TMI E Receipt bi mil Fe JA nE be F wag pa mg kam m j Add Port Delete Port Configure Port iW Enable bidirectional support Add Port Delete Port Configure Part Enable bidirectional support E Enable printer pooling F Enable printer pooling CZE race i Ethernet Starts EpsonNet Config and configures network addresses Communication I F Settings Click Advanced settings to change all settings except the IP Address Advanced settings EpsonNet Config Setting Description Advanced settings Starts EpsonNet Config when the Advanced settings button is clicked Setting Backup Restore Allows you to save the printer settings to a file and to restore the stored settings to the printer 80 TM T20II Software Installer Software User s Manual TM T20I1 Utility JN Caution On the environment with no Advanced Printer Driver OPOS OPOS for NET or JavaPOS installed Automatic Restore Settings is disabled _1 Automatic Restore Settings cannot be saved or restored If
24. S ADK for NET Ver 1 12 x TM T20I D JavaPOS ADK for Windows Ver 1 13 x TM T20II V Supported Not supported Can not be installed TM T20II Software Installer starts in update mode The installer shows the version of driver already installed on the computer and allows you to select whether to update the driver or not How to Access the Manuals The manuals of the drivers and utilities are also installed To see the manuals access the manual data as follows J Advanced Printer Driver Ver 5 Start All Programs All apps Windows 8 EPSON EPSON Advanced Printer Driver 5 EPSON APD5 TM Txx Manual The Easy Install does not install the manuals Install the manuals separately after finishing the Easy Install Z7 See Installing Advanced Printer Driver Ver5 Manual on page 19 L OPOS ADK Start All Programs All apps Windows 8 OPOS Manual TM T20II Software Installer Software User s Manual _JI OPOS ADK for NET Overview Start All Programs All apps Windows 8 EPSON OPOS for NET Manual L JavaPOS ADK for Windows Start All Programs All apps Windows 8 Epson JavaPOS ADK Documentation I TM T20II Utility Except Windows 8 Start All Programs EPSON TM T20II Software TM T20II Utility User s Manual Windows 8 Start All apps EPSON TM T20II EPSON TM T20II Utility User s Manual L EpsonNet Simple Viewer Start All Programs All apps Windows 8 EpsonNet EpsonNet
25. STMT20ILINEF Select a driver to install then install it In Windows2000 s Printers the printer s queue is created Update Mode ANC When installing connect just one printer Do not connect multiple printers L When you are prompted whether to restart the computer during the installation select No and continue the installation Restart the computer and the printer after all the installation is finished If you select Yes and restart the computer during the installation the rest of the drivers will not be installed The update mode allows you to update the printer driver already existing on the system or check to see if the selected newer version of printer driver can exist with the existing printer driver on the same system When the Advanced Printer Driver OPOS ADK OPOS ADK for NET JavaPOS ADK and Epson TM Virtual Port Driver are already installed the driver installation is carried out in the update mode Under Windows 2000 you will be just notified that installing the new driver may cause the printer to malfunction due to the incompatibility with the existing one Insert the TM T20II Software amp Documents Disc into the computer The TM T20II Software Installer is automatically read and the EPSON TM T20II Software Installer screen appears Click the Install Now button Note The displayed language can be changed from Select language When the TM T20II Software Installer is not automatically read do
26. Software User s Manual TM T20I1 Utility Select Mode for Storing Logo has the following functions The current setting is displayed below Storing Logos Select Mode for Storing Logo Mode First Key code Selection Mode 32 32 Decimal Number Ms pal x SP SP Character E Automatically set the key code for the logo to be stored Advanced Printer Driver Control Font Setting Mode gt Key code Nonuse Mode not recommended If the mode is changed the list of specified files is deared a Setting Description First Key code Selection Mode Specifies the logo identifying code Automatically set the key code for the logo to be stored If this is turned on automatically sets Key codes to the logos to be registered If turned off sets Key codes when adding or editing logos Advanced Printer Driver Control Font Setting Mode The Advanced Printer Driver allows you to assign a control font h to I to your logo instead of using a key code Key code Nonuse Mode not recommended Not recommended Key code Management has the following functions You can check the Key code of the logo stored in the printer or delete the logos Key code Management Remarks Setting Description Get KeyCode Obtains registered Key code numbers 66 TM T20II Software Installer Software User s Manual TM T20I1 Utility Adding a Logo Add a logo as follows 1 Click the Add b
27. When checked paper is fed to the head position Eject single cut sheets When checked single cut sheets are printed Click OK Peripheral Device s Action Settings It sets peripheral device s actions such as the cash drawer and buzzer Caution Option buzzer can be operated only with the APD5 utility LY See Buzzer on page 46 How to Setup Follow the steps below 1 Select Peripherals tab from Printing Preferences a EPSON TM m Receipt Printing Preferences Perpherab Cash Drawer Start of Document Start of Page End of page End of Document Cash Drawer Cash Drawer 1 2 Pins a Do not open Open 45 TM T20II Software Installer Software User s Manual Using the Printer Driver From the Peripherals pull down list select the combination of peripheral device to be connected to the printer i EPSON TM Receipt Printing Preferences p Layout Paper Guatty Feed and Cut Peripherals Advanced Settings Version Language Penner Start of Document Start of Page End of page End of Document Cash Drawer Cash Drawer 1 2 Pins a Do not open Open Select the timing to set the peripheral device settings Lx See Setting of Peripheral Device on page 46 i EPSON TM o Receipt Printing Preferences Layout Papec Guality Feedand Cut Peripherals Advanced Settings Version Language Peripheral Cash Drawer Cash Drawer Cash Draw
28. are amp Documents Disc into the computer and follow the steps Z See Displaying the Select Software Screen on page 22 Select the utilities you want to install from the list Clear the check box for the items you do not want to install Click the Next button The Start Installation screen appears The drivers and utilities to be installed are listed Click the Install button to start the installation 31 TM T20II Software Installer Software User s Manual p OO ai EI A EI EI gt Installation TM T20Il Utility is installed Proceed to Step 12 if you do not install any other utility or driver The installation is started without displaying any other screens EpsonNet Config is installed The installation is started without displaying any other screens EpsonNet Simple Viewer is installed Proceed to Step 12 if you do not install any other utility or driver The installation is started without displaying any other screens Install the Epson TM Virtual Port Driver The EPSON TM Virtual Port Driver Ver x xx InstallShield Wizard screen appears Select the language used for installation and click the OK button EPSON TM Virtual Port Driver Ver g InstallShield Wizard Select the language for the installation from the choices below English United States r The Welcome to the EPSON TM Virtual Port Driver Ver x xx Setup Wizard screen appears Click the Next button The License Agreement screen appears R
29. c Journal Coupon Settings User Defined Paper Printing Control Optional Buzzer Font Replacement Send command Item Description Paper Name Name of the user defined paper This name is displayed in Printing Preferences Layout Unit Specify the unit for the paper width setting Paper Size Specify the user defined paper size width height Margin Specify the user defined paper size space top bottom left right Reopen Printing Preferences and select the Layout tab Click Advanced and detail document setting of the printer appears From the paper size select the user defined paper you defined Click OK EPSON TM T200 ReceiptS Advanced Options m EPSON TM T200 Receipts Advanced Document Settings Paper Output E m Copy Count 1 Copy i In Graphic net TrueType Font Substitute with Device Font Document Options Print Optimizations Enabled d Printer Features k Upside down Disabled g a 50 TM T20II Software Installer Software User s Manual Using the Printer Driver Barcode Printing Set a barcode font to the Advanced Printer Driver Barcode can be printed without having barcode encoder in an application or preparing graphic data of barcode High precision reading of barcode can be printed comparing to when the barcode data is set in an application 1 Barcode font can be setup from Barcode of the APD5 utility For detail see Advanced Printer Driver
30. ccess Methods and the Application Range 002 00a ee Accessing from the Printer Driver s Print Language for Displaying Properties How to Use the Basic Functions Paper Feed and Cut Setting Peripheral Device s Action Settings bOCOPMMUN esae be ee ent da a oe Advanced Method 00000008 User Defined Paper Setting Barcode Printing 225 easier a e 26h een eeao oan ais 2 dimensional symbol Printing Coupon Printing 0 8 Buzzer SCUINGS en oe eee ees ee arene wes Other Convenient Functions TM T20Il Utility OVEIVIOW 1 5 4 675 s ruri mi oes egos be ae e na e Starting the TM T20I Utility Starting the TM T20I Utility Adding a Communication Port and Starting the TM T20II Utility CELE DE SUNOS mese adam eae ae eke oes Details sageti e ya 6 eee een eae ae Operation Check 2 0 0 0 eee eee DIOLS LOROS 935 0395 a a eo eee eae Adding a Logo oieri anti ane picta he eg ae ae Paper Reduction Settings Automatic Paper Cut Settings Printing Control Settings TM T20II Software Installer Software User s Manual Contents WS By eee a oe aa te 9 Ba 78 op d o i L2 1 encased gee eae EE 80 Setting Backup Restore c cc 80 Saving the Printer Settings toa File 81 Restore the Se
31. ccurs such as a sudden power shutoff during printing lower the Power Supply Unit Capacity level If the trouble still occurs lower the Print speed 74 TM T20II Software Installer Software User s Manual TM T20I1 Utility Note If you make any of the following settings different from that of the printer driver the printer driver setting is used L Print density L Print speed L Paper width Click the Set button The settings are reflected to the printer Font Settings Allows you to configure the printer font and international character set Configure as follows Note LI When using the Advanced Printer Driver Ver 5 xx Code page and International character set settings become disabled L When using the OPOS ADK the code page configured in OPOS becomes enabled 1 Click the Font menu Configure the following Font Settings If you are using UPOS you need to set the font an the UPOS Code page International character set USA i Set Test Print Setting Description Code page Selects the Code Page of the printer font International character set Selects an international character set 75 TM T20II Software Installer Software User s Manual TM T20I1 Utility Click the Set button The settings are reflected to the printer Click the Test print button to print the configured printer font pattern Buzzer Settings Allows you to configure whether an external op
32. counter USB Device USB Device Version USB ID USB Information L USB I F Setting Description USB Device Displays the product name USB Device Version Displays the product version USB ID Displays the serial number USB Information Displays the character string configured to the interface for identification purpose I Ethernet I F Setting Description Ethernet I F Displays the product name MAC address Hardware version Displays the MAC address setting of the interface Displays the hardware version of the interface Software version Displays the software version of the interface 62 TM T20II Software Installer Software User s Manual TM T20I1 Utility Maintenance counter Details USB I F Maintenance counter Length of paper feed km Resettable Cumulative Number of autocutter operations Times Resettable Cumulative Allows you to check the following counters and to reset some of them The cumulative counter cannot be reset L Length of paper feed km L Number of autocutter operations Times Operation Check Allows you to check the printer operation and communication between the printer and the driver Configure as follows 1 Click the Operation Check menu Operation Check Linit Test Communication Test Test Printing Print Loga Print Fant Driver Test Select the driver to test Test Printing
33. d command 8 5 Dots Width 70 6 mm Height 3 4 mm Type PDFa17 NI A HEIA Pr Martini ROMA MII 0 30 Dots 0 3 90 Dots 2 8 Dots 2 8 Dots Error Correction Level F m Paper Size 80mm Options Rotation Normal Add Quiet Zone _ Always print with image barcode Test Printing 1234567890 Alphanumeric Status Offline Specify a 2 dimensional font to 2 dimensional data using the application 2 dimensional symbol is printed based on the settings of the APD5 utility Coupon Printing APD5 provides the coupon printing function Coupons can be printed with various settings without modifying the customer s POS application Application Printing data Note For detail see Advanced Printer Driver Ver 5 Printer Manual 52 TM T20II Software Installer Software User s Manual Using the Printer Driver Buzzer Settings Allows you to configure whether an external optional buzzer is used and the buzzer pattern settings Configure as follows 1 Click the Optinal Buzzer menu Select whether or not the buzzer is used APD5 Utility Ver 1 00 Logo Optional External Buzzer Settings Layout Barcode 2 dimensional symbol Electronic Journal Coupon Settings User Defined Paper Printing Control Optional Buzzer Font Replacement Send command Disabl
34. del EPSON TM EEE Receipts Features Color Ne Paper available Remove device Double sided Mo Roll Paper 80 x 237 mm Staple Me Properties Speed Unknown Maximunn reselution 202 dpi Accessing from the Application s Print Setting Menu fd Document WordPad Recent documents General Select Printer Status Not Available E Print to file Preferences A Fage setup Location Dimai Find Printer Send in e mail Page Range i All Number of copies 1 9 About WordPad Selection rae E Pages 1 65535 Collate Exit Enter either a single page number or a single i 2 2 3 3 page range For example 5 12 Language for Displaying Properties The language used in the Advanced Printer Driver screen and Help can be selected from 24 languages Selecting the language that is easiest for you to understand will help you correctly configure the settings in the Advanced Printer Driver The language that initially appears is set based on the language information in your operating system 42 TM T20II Software Installer Software User s Manual Using the Printer Driver 1 Select the Language tab from Printing Preferences dep EPSON TM TEmT Receipt Printing Preferences Layout Papee Quality Feed and Cut Penpherals Advanced Settings Veen Uno eae Select language Select the language that you wish to use in the screens and Help from the Select language pull down list When fi
35. dit and restore it as a file When using the OPOS to store your logo 3 see Storing Logos on page 86 Storing Logos First Key code Selection Mode Image File Size Byte Preview Est Change Logo Mode Key code Management H Additional logo size 0 KE H Used amount 0 KB 256 KB Storing Logos has the following functions Setting Description Key Code List Displays the logos registered in the printer and the logos to be added in the printer The logos registered in the printer have at the beginning of the Key code Add Adds logo data on the list Edit Edits the halftone and brightness settings of the selected logo data Delete Deletes the selected logo data from the list or deletes logos stored on the printer Test print Prints the selected logos Change Logo Mode Displays Select Mode for Storing Logo screen Key code Management Displays Key code Management screen Preview Displays the logo image to be stored on the printer Logo images stored on the printer are not displayed Logo Indicator Indicator Registerable memory size in the printer for logos Additional logo data Size of logos displayed on the list Used amount Size of registered logos Save to File Saves the configured logo data as a file to store it to the printer The data can also be stored as a bmp file Store to Printer Stores the configured logo data to the printer 65 TM T20II Software Installer
36. e Buzzer Do not use the external buzzer Go to step 4 Enable Buzzer Use the external buzzer Go to step 3 Specify when the optional buzzer sounds and the buzzer pattern Optional External Buzzer Settings i Disable Buzzer When an error occurs When automatic paper cut activates When specified pulse 1 2 pin occurs When specified pulse 2 5 pin occurs Setting Description When an error occurs Configure the buzzer setting when an error occurs 53 TM T20II Software Installer Software User s Manual Using the Printer Driver Setting When automatic paper cut activates Description Configure the buzzer setting when automatic paper cutting takes place When specified pulse 1 2 pin occurs Configure the buzzer setting when the specified pulse is generated When specified pulse 2 5 pin occurs Buzzer Configure the buzzer setting when the specified pulse is generated Test the buzzer Select a sound pattern To test the buzzer sound click the Test button 4 Click the Set button The settings are reflected in the printer Other Convenient Functions Printer driver can be also used the ways shown below Print by Registering Logo to Printer Sending Commands Printing start position setting Alias name setting to font Creation of emulation font Replacing function of device font O O U U U O O LL wu Printing Control Settings Print Device Font in
37. e most recently saved logo filename will appear Click the OK button If you wish to change the file to be saved click the Browse button Select Logo File ham Sn The logo stored in the printer is automatically specified here To change logos to the TLG file vou created press the Browse button and select it Specify the filename and backup location in the next screen and save the file Restore the Settings to the Printer Restore the settings as follows 1 Click the Backup Restore Click the Browse button and specify the printer setting file to be restored Setting Backup Restore Backup Option Stored logo data Printer settings Restore Description Restore Automatic Restore Settings Automatically restore the settings when replaced with a new printer Display confirmation message before executing automatic restore Display the restoration result Click the Restore button A restore confirmation message will appear Click the Yes button 4 If the restore is successful a success message is displayed 82 TM T20II Software Installer Software User s Manual TM T20I1 Utility Automatic Restore Settings Configures the automatic restore settings Setting Backup Restore Backup Option W Stored logo data V Printer settings Backup Restore File name i m Browse Description W Display confirmation message before executing automatic restore W Display the restoration re
38. e printer The logo data are also saved in the logo store file TLG file This file is used when creating the printer setting file Storing Logos First Key code Selection Mode Image File Add Delete Preview Test print m a z Change Logo Made Key code Management E Additional logo size OKB LEI A 3 E Scaling ini kd Alignment Left kd Save to File Store to Frinter Logo Store File Because the logo store file TLG file is automatically saved when adding logos to the printer the logo store file only contains the logo data last added to the printer When saving multiple logo data in the printer setting file add all the logo data to the printer altogether at once When saving the data already stored on the printer follow the procedure below 1 Prepare all the logo data to add to the printer Delete all the logo already stored on the printer LY See Storing Logos on page 64 TM T20II Software Installer Software User s Manual TM T20I1 Utility Store all the logos and add them to the printer altogether at once In this way the logo store file TLG file containing all the logo data is created Lx See Adding a Logo on page 67 Paper Reduction Settings Caution The paper reduction settings may not reduce paper usage as specified when you print images such as logos or coupon tickets or print in page mode The followings are examples that the paper reduction settings are n
39. ead the content and select the I accept the terms in the license agreement Then click the Next button The Ready to Install the Program screen appears Then click the Install button When the following screen appears click the Restart Later button Note If you restart your PC at this point the installation process may not be completely performed Be sure to select the Restart Later button The InstallShield Wizard Complete screen appears Click the Finish button If the restart of your PC is requested select Yes I want to restart my computer now and click the Finish button 32 TM T20II Software Installer Software User s Manual Installation If you restarted the computer there s no need to proceed to Step 12 but the installation is complete EPSON TH Virtual Part Driver Vere InstallShield Wizard InctallShield Wizard Complete The install hield Wend has guccesstully installed EPSOM TH Votual Pot Greer Verb Da Belore pou can use JOU must restart pour competed Mo eal reglact my computer Later Remove ony disks from ther creez and then click Finech to complete slugi Caution If the restart of your PC is requested on the InstallShield Wizard Complete screen be sure to select Yes I want to restart my computer now When the installation is completed the Installation Finished screen appears When exiting the installation Uncheck the Run TM T20II Utility the box is uncheck
40. ed E When printer is powered on 7 Extra Upper Space Reduction This may cause a white line to appear on the top loga Please conduct test printing Set Setting Top Logo Bottom Logo Description Sets the logo that is printed at the top of the paper 1 Key code Selects the Key code of the logo to be printed I Alignment Selects the logo print position Sets the logo that is printed at the bottom of the paper 1 Key code Selects the Key code of the logo to be printed I Alignment Selects the logo print position Condition Sets the condition for top logo printing L1 When paper is cut by command The checkmark cannot be removed from this checkbox L When cover is closed Sets whether the top logo is printed when the cover is closed L1 When printer is powered on When you select this the printer is reset every time the printer setting is changed paper is automatically cut and Top Logo is printed Extra Upper Space Reduction Selects whether to reduce the top margin when printing the logo configured at Top Logo You can select this function only when Top Logo is selected Selecting this may cause a white line to appear on the logo 13 mm away from the top of the logo Make sure to conduct a test print to see if the print result is acceptable for you 4 Click the Set button The settings are reflected to the printer Printing Control Settings Allows you to configure the printing contro
41. ed Printer Driver Ver 3 04 select Vender Class L When you do not need to use the Printer Class using Vender Class is recommended 78 TM T20II Software Installer Software User s Manual TM T20II Utility Communication I F Settings USB Class Setting a Printer Class Vender Class L Printer Class Configures the printer to the printer class L Vender Class Configures the printer to the vender class If you change the USB class from Vender Class to Printer Class the printer becomes a Printer Class device The computer detects the printer as a new Printer Class device and creates a new port Using the newly created port you can print but cannot use the EPSON Status API The existing port still allows you to both print and use the EPSON Status API so you can delete the newly created queue and use the existing queue instead How to distinguish the EPSON Status API available port Select Properties Ports and check the Port and Description L Printer Class Port USBxxx Description Virtual printer port for USB I Vender Class Port ESDPRTxxx Description USB TM T20II 79 TM T20II Software Installer Software User s Manual TM T20I1 Utility Printer Class Vender Class eh EPSON TM lll Receipt Properties eS ie ESON TM Receipt Properties eso General Sharing Ports Advanced Celor Management Security ulity Version ae EPSON TM Receipt wie EPSON TM Receipt
42. ed by default Then click the Finish button to end the installation When setting the printer using TM T20I Utility continuously Check the Run TM T20I Utility checkbox Click the Finish button to end the installation The TM T20I Utility starts to run Lx See TM T20I Utility on page 55 E EPSON TM T200 Software Installer Ver 0 Installation Finished The installation of the software has finished The installation of the following software was executed TM T2011 Utility Ver a amp Coupon Generator EpsonNet Config Ver EpsonNet Simple Viewer Ver TM Virtual Port Driver Ver 5 Please run a printing test for the Advanced Printer Driver if necessary Please set up the printer if necessary TM T201 Utility lt Back Cancel This is the end of the utility installation Adding a printer to a Windows2000 PC If your printer is a serial type and your OS is Windows 2000 install Advanced Printer Driver as follows 33 TM T2O0II Software Installer Software User s Manual Do ao WwW EI Installation In Windows2000 s Printers double click Add Printer The Add Printer wizard starts up Follow the instructions shown on the screen Select Local Printer and turn off Automatically detect and install my Plug and Play printer Select a COM port to connect the printer Select Have Disk then Browse and then select the following INF files on the CD ROM root Windows Advanced Printer Driver V5_INF Driver EA5IN
43. ent computer POS or KIOSK terminal Using this with TM T20II Utility makes it possible to change the settings of TM T20II connected to a client computer Epson TM Virtual Port Driver This allows you to convert TM T20II from serial to USB Ethernet When your POS application has a serial port of TM T20I and you want to connect TM T20II via USB Ethernet you can use the USB Ethernet connected printer from the application as though the printer is serial printer Because the tool performs the conversion automatically you do not need to change the application s ESC POS commands that controls the printer connected via serial port TM T20II Software Installer Support OS The following lists the supported operating systems for running the TM T20II drivers and utilities E L L L 1 The OPOS ADK can be used under 64 bit OS as long as the system meets the operating requirements For more details see the release note before installing the OPOS ADK 2 The OPOS ADK for NET Advanced Printer Driver Ver 5 and the Epson TM Virtual Port Driver cannot be used Windows 8 32 bit 64 bit 1 Windows 7 SP1 32 bit 64 bit 1 Windows Vista SP2 32 bit 64 bit 1 Windows XP SP3 32 bit Windows 2000 SP4 Windows Server 2012 64 bit 1 Windows Server 2008 R2 SP1 1 Windows Server 2008 SP2 32 bit 64 bit 1 Windows Embedded for Point of Service gt Windows Embedded POSReady 2009 3 under Windows 2000 ge R
44. er 1 2 Bins a Do not open Open Cash Drawer 2 5 Pins Do not open Open Confirm Current settings and click OK Setting of Peripheral Device Settings may be different depending on peripheral devices Note Cash drawer and external buzzer cannot be used simultaneously Cash Drawer Settings of cash drawer are shown below Peripherals Setting Value Description Cash Drawer 1 2 Pins Do not open Drawer 1 2 pins does not open Open Drawer 1 2 pins opens Cash Drawer 2 5 Pins Do not open Drawer 2 5 pins does not open Open Drawer 2 5 pins opens Buzzer Settings of buzzer are described below 46 TM T20II Software Installer Software User s Manual Using the Printer Driver Peripherals Setting Value Description External Buzzer Turn off External buzzer does not sound Turn on External buzzer sounds Pattern Specify buzzer sound pattern Specify buzzer sound frequency Logo Printing Logo can be printed at the beginning and the end of printing There are 2 printing methods L Print by Registering Logo to Printer Driver LY See Print by Registering Logo to Printer Driver on page 47 L Print by Registering Logo to Printer For detail see Advanced Printer Driver Ver 5 Printer Manual Note L The file formats that can be registered are BMP JPEG GIF and PNG L The maximum file size that can be registered is 2047 x 831 d
45. er has not been removed from the binary or disabled 3 Altered versions including but not limited to ports to new operating systems existing ports with new graphical interfaces versions with modified or added functionality and dynamic shared or static library versions not from Info ZIP must be plainly marked as such and must not be misrepresented as being the original source or if binaries compiled from the original source Such altered versions also must not be misrepresented as being Info ZIP releases including but not limited to labeling of the altered versions with the names Info ZIP or any variation thereof including but not limited to different capitalizations Pocket UnZip WiZ or MacZip without the explicit permission of Info ZIP Such altered versions are further prohibited from misrepresentative use of the Zip Bugs or Info ZIP e mail addresses or the Info ZIP URL s such as to imply Info ZIP will provide support for the altered versions 4 Info ZIP retains the right to use the names Info ZIP Zip UnZip UnZipSFX WiZ Pocket UnZip Pocket Zip and MacZip for its own source and binary releases 84 TM T2O0II Software Installer Software User s Manual Application Development Information Application Development Information This chapter explains how to control this printer and gives information useful for printer application development How to Control the Printer The printer is controlled
46. erences Depending on the OS on page 9 When the User Account Control screen appears click the Continue button The Epson TM Virtual Port Driver uninstallation confirmation screen appears Click the Yes button The uninstallation of the Epson TM Virtual Port Driver starts When uninstallation is complete the window automatically closes Uninstalling the EpsonNet Simple Viewer When uninstalling this tool also uninstall EpsonNet SDK for Windows unless you are using it with another application Follow the steps below to uninstall this tool Select Start Control Panel Uninstall a program EpsonNet Simple Viewer Click Uninstall For information of the differences in screen selections based on the OS versions LY See Differences Depending on the OS on page 9 When the User Account Control screen appears click the Continue button The Uninstall Confirmation window appears Click on the Yes button This tool will be uninstalled 38 TM T20II Software Installer Software User s Manual L3 C EI ESI Installation The Uninstall Complete window appears click on the Finish button If EpsonNet SDK for Windows is not been used with any another application perform Step 4 through Step 6 The Uninstall or change a program window appears Double click on EpsonNet SDK for Windows The Uninstall Confirmation window appears click on the Yes button The EpsonNet SDK for Windows will be uninstalled The Uninstall Comple
47. estrictions on Using Multiple Drivers on the Same EpsonNet Simple Viewer is not supported System TM T20II Software Installer may not install the driver or if the driver can be installed the combination of the existing driver and the newly installed driver may not be supported Refer to the following table Before TM T20Il driver is installed Software User s Manual TM T20II Software Installer A Advanced Printer Driver Ver 3 Advanced Printer Driver Ver 4 00 to 4 08 Advanced Printer Driver Ver4 09 or 4 17 Advanced Printer Driver Ver4 50 to 4 53 Advanced Printer Driver Ver4 54 or later OPOS ADK Ver 2 67 former TM T20II Software Installer Software User s Manual Overview Before TM T20Il driver is installed TM T20Il Software Installer A B OPOS ADK Ver 2 68 or later J current OPOS ADK for NET Ver 1 11 8 former OPOS ADK for NET Ver 1 11 20 or later J J JavaPOS ADK Ver 1 11 18 former JavaPOS ADK Ver 1 11 20 or later J TM S1000 Driver A A J TM S9000 2000 Driver A A J TM J9000 OPOS ADK J J J TM J9000 Advanced Printer Driver J Jo J TM J9000 Status API J J J TMCOMUSB Ver 2 TMCOMUSB Ver 3 and Ver 4 or Epson TM Virtual Port Driver Ver 5to J Ver 7 00 Epson TM Virtual Port Driver Ver 7 10a or later J J Epson InkJet Printer Driver J J A Advanced Printer Driver Ver 5 B OPOS ADK Ver 2 7x TM T20I C OPO
48. et Simple Viewer Only for Ethernet connection Click the Install button to start the installation E EPSON TM T20II Software Installer Ver I Start Installation Before starting the installation review the list of items to be installed The following items will be installed To make changes click the Back button To begin installing the listed items dick the Install button Advanced Printer Driver Ver Installation Folder C Program Files EPSON EPSON Advanced Printer Driver 5 Printer Configuration Add EPSON TM T20I1 Receipt EPSON T M T2011 Receipts Create a USB part TM T2011 Utility Ver Installation Folder C Program Files EPSON TM T 2011 Software TMT 201IUTL 16 TM T20II Software Installer Software User s Manual Installation 9 The Connect Printer screen appears Connect the computer to the printer and turn the printer on EPSON TM T2011 Software Installer Ver I E Connect Printer Connect the printer to the computer with an interface cable load paper and then turn on the printer Make sure the printer is turned on and connected to your computer via the USB cable The program will search for the printer and automatically configure the port If you want to connect the printer via serial parallel or network connection or if you want to manually configure the port dick the Next button Cancel When the USB connection between the computer and printer is established a pop up mes
49. eting Password Default Settings Tense J Canc Hep The confirmation screen appears Click the Yes button The configured settings are sent to the printer After approx 30 seconds the completion screen appears Click the OK button Transmission is complete Configuration successfully completed Curent Progress os C 100 Confirm the settings on the EpsonNet Config screen Quit the EpsonNet Config Installing Advanced Printer Driver Ver5 Manual The Easy Install does not install the Advanced Printer Driver manual To see the manual install it separately Insert the TM T20II Software amp Documents Disc into the computer The TM T20II Software Installer is automatically read and the EPSON TM T20II Software Installer screen appears Click the Install Now button When the TM T20II Software Installer is not automatically read double click the TMInstallNavi exe icon in the TM T20II Software amp Documents Disc The License Agreement screen appears Read the content and select the I accept the terms in the license agreement Then click the Next button 19 TM T2O0II Software Installer Software User s Manual Installation The Update Software screen appears Click the Next button 4 The Select Software screen appears Check the Sample and Manual checkbox and click the Next button Clear the checkbox for the drivers or utilities that you do not install here qj EPSON TM T20II Soft
50. ettings with the communication settings of customer display driver set by APD4 9 Set the followings from 4 Apply and click Save Setting 2 Printer Bagal Hame EPSON TH Fiecaipit 3 Communication Settings 4 Apply Port Type usa E Set as Default Printer Port ESDPRTOO1 Save Settings Gop Delete Test Print 5 Complete Item Description Set as Default Printer Check when configuring the printer as that normally used from the Windows applications 25 TM T20II Software Installer Software User s Manual Installation When the printer is registered the screen comes up as shown below Click Yes Test page printing of Windows is carried out PrinterReg After confirming the test page printing of Windows click Next under 5 Complete 2 Printer 3 Communication Settings 4 Apply Port Type USB W Set as Default Printer Model Port ESOPRTOU1 EPSON TM Facaipt Save Settings aa EPSON TH m Faceipt Test Print 5 Complete The Installation Complete screen appears Click Close to finish the installation When the installation is completed the Installation Finished screen appears When conducting test print Click the Printing Test button When the test print is finished click the Finish button to end the installation E EPSON TM T200 Software Installer Ver 0 Installation Finished The installation of the software has finished The in
51. h Steven M Schweda Christian Spieler Cosmin Truta Antoine Verheijen Paul von Behren Rich Wales Mike White 83 TM T2O0II Software Installer Software User s Manual TM T20I1 Utility This software is provided as is without warranty of any kind express or implied In no event shall Info ZIP or its contributors be held liable for any direct indirect incidental special or consequential damages arising out of the use of or inability to use this software Permission is granted to anyone to use this software for any purpose including commercial applications and to alter it and redistribute it freely subject to the above disclaimer and the following restrictions 1 Redistributions of source code in whole or in part must retain the above copyright notice definition disclaimer and this list of conditions 2 Redistributions in binary form compiled executables and libraries must reproduce the above copyright notice definition disclaimer and this list of conditions in documentation and or other materials provided with the distribution Additional documentation is not needed for executables where a command line license option provides these and a note regarding this option is in the executable s startup banner The sole exception to this condition is redistribution of a standard UnZipSFX binary including SFX Wiz as part of a self extracting archive that is permitted without inclusion of this license as long as the normal SFX bann
52. ication settings The port setting of the computer is not made so making the printer settings may cause a communication error with the printer In such case change the printer driver settings or any other necessary settings on the computer so that they match with the settings made on the printer 1 Click the Communication I F menu The type of port currently used for communicating with the printer is automatically detected and displayed on the Communication I F Settings screen Make the communication settings Serial Configures the serial communication lt gt See Serial on page 78 USB Configures the USB communication lt 2 See USB on page 78 Ethernet Configures the IP address lt 3 See Ethernet on page 80 77 TM T20II Software Installer Software User s Manual TM T20II Utility Click the Set button The settings are reflected to the printer Serial Configures the serial communication Setting Communication I F Settings Communication speed 115200 bps ka Parity Data Bit Stop Bit Flow contral None a bits 1 bit r DTR DSR Description Communication speed Selects the communication speed USB Configures the USB class Note Parity Configures the parity Data Bit Configures the data bit Stop Bit Configures the stop bit Flow control Configures the flow control L When using the UPOS or Advanc
53. information on how to print using the printer driver Lx See Using the Printer Driver on page 41 Network Address Setting for Ethernet Printer If you are using an Ethernet connection configure the IP address using the EpsonNet Config 1 Start the EpsonNet Config When the EpsonNet Config is already installed start it by clicking Start All Programs EpsonNet EpsonNet Config Vx EpsonNet Config The EpsonNet Config screen appears Check that the target printer is listed in the screen fi EpsonNet Config Device D Display y Toei Heip H EpsonNet Config ar EETA iz Refresh z t ty Fiter A Model Name MAC Address IP Address 5 TM E EN Ei E Press the F5 key to refresh Select the printer you want to configure then click the Configuration button When the printer does not appear click the Refresh button 4 The Device Properties screen appears Select the Network Interface TCP IP Basic 18 TM T2O0II Software Installer Software User s Manual Installation Configure the printer IP address Then click the Transmit button Select the Manual and Set using PING Then configure the IP Address Subnet Mask and Default Gateway Device Properties mi m Network Interface Method for Specifying UP Address gt information Aubamatic a Manual Basic TPP ef using Automatic Pevate IP Addressing APIPA Basic Sea uta PING 3 Admuanistrater Settings Administrator informatii IP Address S
54. l settings of the printer Configure as follows 73 TM T20II Software Installer Software User s Manual TM T20I1 Utility 1 Click the Printing Control menu Configure the following printing control items Printing Control Settings Paper width Humber af columns 80mm 48 columns r Logo 180 dpi Emulation Mode Disabled ka Print density 100 iz Print speed Level 13 Fast Power Supply Unit Capacity Level 3 Hi Setting Description Paper width Selects the paper width Logo 180 dpi Emulation Mode Enables or disables Logo 180 dpi Emulation Mode Logo 180 dpi Emulation Mode allows you to print logos created for 180dpi printers on the same position and in the size when using TM T20 However Storing Logos 27 See Storing Logos on page 64 allows you to freely adjust the size of logos when adding editing them So it is recommended to use Storing Logos when adjusting the size of logos Print density Selects the print density Print speed Selects the print speed Power Supply Unit Capacity Selects the capacity level of the power supply unit connected to the printer Caution L When you change the paper width When changing the paper width from 80 mm to 58 mm attach the Roll Paper Guide to the printer Changing the paper width from 58 mm to 80 mm may produce unexpected printout results Make sure you test print after changing the width L Ifapower related trouble o
55. ming Guide You can obtain this guide by signing a non disclosure agreement with Epson Storing Logos Caution L You cannot store UPOS SetBitmap logos and logos configured using TM T20I Utility in the same printer L When a SetBitmap logo is stored it overwrites and deletes an existing TM T20II Utility logo The procedure to store logos differs by your system configuration as follows L When using the Advanced Printer Driver only Use TM T20II Utility to store logos L When using the OPOS and Advanced Printer Driver on the same system 86 TM T20II Software Installer Software User s Manual Application Development Information L OPOS setting Using the OPOS SetupPOS select Bitmap tab on the Device Specific Settings screen and uncheck the checkbox for NVRAM Device Specific Settings Color Bitmap Status Log Printing Properties General Paper Bitmap OK Cancel Aol L Storing logos in the printer Use TM T20II Utility to store logos in the printer Download Drivers utilities and manuals can be downloaded from one of the following URLs For customers in North America go to the following web site http www epsonexpert com For customers in other countries go to the following web site https download epson biz com service pos Select the product name from the Select any product pulldown menu 87
56. n the Sae yS eere a ed oo ere oe a8 e 7 How to Access the Manuals 4 8 Differences Depending on the OS 9 Viewing the Users Manual 10 Getting the URL of Epson Support Website 11 Installation Installation Types 0002 13 Easy Install se o oo 0 5 en io t I a a s 13 Network Address Setting for Ethernet Printer Installing Advanced Printer Driver Ver5 e nl E DE DRE N eed ae RAE Ie 19 Configuring IP Address of the Printer Driver ei n A au ae ta 2 i o a d ie 9 a 0 8 ese ees 20 Custom Instal se sac eai seeke Ret d pe Dia esas 22 Displaying the Select Software Screen 22 Installing the Printer Driver 23 Installing the OPOS ADK 27 Installing the OPOS ADK for NET 28 Installing the JavaPOS ADK 29 Installing the Utility 2 cc 31 Adding a printer to a Windows2000 PC 33 Update Mode cc 34 Umastalafon ees tv eee sta ue E eee ai it 36 Uninstalling the Windows Printer Driver 36 Uninstalling the TM T20II Utility 37 Uninstall the EpsonNet Config 38 Uninstalling the Epson TM Virtual Port IILE Da ie ot o dee pe d d a sata e ee ee ee 38 Uninstalling the EpsonNet Simple Viewer Uninstalling the OPOS ADK Uninstalling the OPOS ADK for NET Uninstalling the JavaPOS ADK Using the Printer Driver Printer Driver A
57. n the computer Select Start Control Panel Uninstall a program EPSON TM T20II Utility Click Uninstall For information of the differences in screen selections based on the OS versions LY See Differences Depending on the OS on page 9 When the User Account Control screen appears click the Continue button The TM T20I Utility uninstallation confirmation screen appears Click the Yes button The Uninstall Complete screen appears Click the Finish button to finish the uninstallation 4 The uninstallation of the TM T20II Utility starts 37 TM T2O0II Software Installer Software User s Manual Installation Uninstall the EpsonNet Config S EI LI Select Start Control Panel Uninstall a program EpsonNet Config Click Uninstall For information of the differences in screen selections based on the OS versions LY See Differences Depending on the OS on page 9 When the User Account Control screen appears click the Continue button The EpsonNet Config uninstallation confirmation screen appears Click the Yes button The uninstallation of the EpsonNet Config starts The Uninstall Complete screen appears Click the Finish button to finish the uninstallation Uninstalling the Epson TM Virtual Port Driver S EI LI Select Start Control Panel Uninstall a program EPSON TM Virtual Port Driver Click Uninstall For information of the differences in screen selections based on the OS versions LY See Diff
58. nder Windows Java environment See the following document for the information about how to create an environment and develop an application EPSON OPOS ADK _J OPOS Installation Manual 85 TM T20II Software Installer Software User s Manual Application Development Information User s Manual Application Development Guide UnifiedPOS Retail Peripheral Architecture O O O O Sample Program Guide EPSON OPOS ADK for NET LI OPOS ADK for NET Installation Guide L UnifiedPOS Retail Peripheral Architecture L Users Reference SetupPOS L Application Development Guide POSPrinter TM T20II EPSON JavaPOS ADK for Windows _J JavaPOS ADK Installation Guide This guide describes general information on how to control printers using the OPOS ADK in the chapter POS Printer and Appendix A It does not describe Epson s specific functions ESC POS Commands The ESC POS command is the printer command system developed by EPSON This allows you to directly control the all functions of the printer Using the commands with the driver you can use a function that is not provided by the driver Compared to using the drivers using the commands is difficult because you need to have knowledge about the detailed printer specifications and how to combine the commands Refer to the ESC POS Quick Reference for a simple explanation of the ESC POS command A detailed explanation of the ESC POS command is included in the ESC POS Application Program
59. nished click the OK button The languages that can be selected are shown below Selectable languages Chinese Hongkon Chinese Simplified Chinese Traditional Croatian Czech Danish Dutch English Italian Japanese Korean Norwegian Portuguese Russian Slovenian Spanish Swedish Thai Turkish Vietnamese How to Use the Basic Functions cy Paper Feed and Cut Setting on page 43 Ly Peripheral Device s Action Settings on page 45 cy Logo Printing on page 47 Paper Feed and Cut Setting It sets the timing of auto cut and paper feed before and after the printing 1 Select Feed and Cut tab from printing preferences 43 TM T20II Software Installer Software User s Manual Using the Printer Driver Select a cut and paper feed method displayed in the Preset option list and click OK Select using the illustration of paper feed and cut displayed in Illustration for your reference Geb EPSON TM Receipt Printing Preferences Layout Paper Gualty Feed and Cut Peripherals Advanced Settings Version Language Preset option flustration Document Feed Ha cut DocumentiHa feed Gut Document No feed Ma cut Page Feed Cut Page Feed No cut Page No feed Cut Custom Detail option Start of Document Start of Page End of page End of Document Paper Cut Note L Feed Paper is fed to the auto cutter s cutting position after printing a document L No Feed Pa
60. nts Disc into the computer and follow the steps Z See Displaying the Select Software Screen on page 22 Select the Advanced Printer Driver Ver 5 xx Clear the check box for the items you do not want to install Click the Next button The Check Install screen appears Check the Warning Check the computer environment and click Next to continue the installation Note In the Warning the versions of Epson driver tool that can coexist with the APD5 are listed 23 TM T20II Software Installer Software User s Manual Installation 4 The License Agreement screen is displayed After checking the contents and selecting Agree click Install Installation of Advanced Printer Driver Ver 5 begins The Printer Registration screen appears Here connect the printer to the computer and turn the printer s power on Click Next 6 The Register Change and Delete EPSON TM Printer screen is displayed From 1 Select Printer select lt New Printer gt Register Change and Delete EPSON TM Printer Fille 1 Select Printer Set the followings from 2 Printer 2 Printer 3 Communication Settings 4 Apply Port Type usa YlSet a Default Printer Port Auto setup EPSOM TH ma Racaipt a Save Settings Hame EPSON TH ma Receipt Test Print 5 Complete Item Description Name Specify the printer driver name Do not use Unicode 2 byte characters for the name 8 Select a port to u
61. ot reflected L Windows printer driver Printing with the settings that enable Print all text as graphic images such as rotation setting watermark setting and barcode rotation setting L Mac printer driver All printing using the Mac printer driver L Linux printer driver All printing from the Linux printer driver LI UPOS Printing in page mode printing with rotation setting printing with bitmap Images Barcode Characters horizontally aligned and so on L ESC POS command Printing images such as logos or coupon tickets printing in page mode printing with rotation setting and so on The printer drivers have a function that allows you to reduce the top and bottom margins Use the function if you want to save paper For more details see the manual of the printer driver Allows you to configure the paper reduction settings Configure as follows 1 Click the Paper Reduction menu 70 TM T2O0II Software Installer Software User s Manual TM T20I1 Utility Configure the following items referring to the preview on the right portion of the screen Paper Reduction Settings Extra Upper Space Reduction Normal Paper Reduction ABCDEF Extra Lower Space Reduction Enable r Line Space Reduction Rate Not reduced Line Feed Reduction Rate Not reduced ABCDEF ABCDEF ABCDEF 4 4 Barcode Height Reduction Rate Not reduced p Note Settings other than Ext
62. ots width x height Number of dots is calculated as follow Calculation formula Number of dots length cm 2 54 1 inch x resolution level of TM printer DPI Print by Registering Logo to Printer Driver Note When using a serial interface it is recommended to register a logo to the printer For detail see Advanced Printer Driver Ver 5 Printer Manual Follow the steps below to register a logo and print 1 Launch the APD5 utility Select Logo 47 TM T20II Software Installer Software User s Manual Using the Printer Driver Select the position where the logo is printed Select the printing position from Start of Document End of Document Start of Page End of Page r APD5 Utility Ver EE Logo Printing Timing Image File Layout Start of Document Do not print End of Document Do not print Barcode Start of Page Do not print End of Page Do not print 2 dimensional symbol Electronic Journal Preview Coupon Settings User Defined Paper Specify NV Logo Printing Control Optional Buzzer Font Replacement Send command cm m Port USB 001 L 4 Click Select Image to specify the logo to print The Logo Edit screen is displayed Refer to the preview at the upper part of the screen and edit the image data for logo When editing is done click OK Logo Edit EPSORLong Original image Epson M RT im Settings are desc
63. per is not fed after printing a document Customization of Paper Feed and Cut Customization is possible when no preset function is desired such as specifying the amount of paper feed and modifying the timing control Follow the steps below Select Custom from the list of Preset option ip EPSON THe Receipt Printing Preferences Layout Paper Gualty Feed and Cut Peripherals Advanced Settings Version Language Preset option Thustration Gocument Feed Cut Document Feed No cut DocurentiHa feed Gut DocumentiNo feed No cut Page Feed Cut Page Feed Ha cut Start of Document Start of Page End of page End of Document Paper Cut Feed to cut position before cutting Cutting mathod No cut Feeding amount Settings are described below 44 TM T20II Software Installer Software User s Manual Using the Printer Driver Item Description Timing Start of Document At the beginning of document printing Start of Page At the beginning of each page in the document End of Page At the end of each page in the document End of Document At the end of document printing Action Feed to cut position before When checked paper is fed to the cutting position of auto cutter cutting Cutting method Auto cutter will not act when No cut is selected Feeding amount Feed paper to the print Starting position The amount of paper feed can be specified by inches
64. r Settings Control Panel Uninstall a program Windows 7 Start Control Panel Uninstall a program Windows Vista Start Control Panel Uninstall a program Windows XP Start Control Panel Add or Remove Programs Windows 2000 Start Settings Control Panel Add Remove Programs Vi Ly The ewing the User s Manual Software User s Manual this manual Explains about TM T20II Software amp Documents Disc how to install the driver how to use the utilities and so on User s Manual Describes how to set up TM T20II hardware what are included in the box how to handle the hardware compliant safety standards safety precautions and so on Technical Reference Guide Provides all information necessary to develop design and or install a system that uses TM T20I or to develop or design a printer application for TM T20II ESC POS Quick Reference Quick Reference is a guide to using ESC POS command to control the printer following is how to view the manuals Insert the TM T20II Software amp Documents Disc to the computer The TM T20II Software Installer is automatically read and the EPSON TM T20I Software Installer screen appears Click the Manuals button When the TM T20II Software Installer is not automatically read double click the TMInstallNavi exe icon in the TM T20II Software amp Documents Disc qj EPSON TM T20II Software Installer Ver Install Now Manuals Support TM T201 Exi
65. ra Upper Space Reduction and Extra Lower Space Reduction are disabled due to the Advanced Printer Driver being in graphics mode Setting Description Extra Upper Space Reduction Selects whether to reduce the upper margin or not Enable this to cut out the extra upper margin that is created before the first print data is printed Extra Lower Space Reduction Selects whether to reduce the lower margin or not Enable this to cut out the lower margin that is created from the time the last line is printed until the paper is automatically cut Line Space Reduction Rate Selects a reduction ratio of line spacing during printing The minimum pitch is two dots If reduction results in a line spacing of less than 2 dots the line spacing will be reset to 2 dots Line Feed Reduction Rate Selects a reduction ratio of line spacing of blank lines This setting is ignored for the portion set to be cut out by the Extra Upper Space Reduction setting When you advance the paper by inserting line feeds in order to cut the paper manually you may not be able to advance the paper until the last line reaches the cut position because of this reduction setting Barcode Height Reduction Rate Selects a reduction ratio of barcode height The barcode height cannot be reduced to less than 30 dots height This setting can cause the barcode size to fall outside the barcode standards Click the Set button The settings are reflected to the
66. restart the computer during the installation select No and continue the installation Restart the computer and the printer after all the installation is finished If you select Yes and restart the computer during the installation the rest of the drivers will not be installed L Ifyou select more than one drivers to install them under Windows 2000 you will be prompted that this may cause the printer to malfunction Under Windows 2000 you can install only one driver The following items can be installed with the Custom Install The TM T20II Software amp Documents Disc is required for Custom Install L Advanced Printer Driver Ver 5 Li Sample and Manual OPOS ADK OPOS ADK for NET JavaPOS ADK O O O O TM T20II Utility _J Coupon Generator L EpsonNet Config L EpsonNet Simple Viewer L Epson TM Virtual Port Driver Displaying the Select Software Screen The TM T20II Software amp Documents Disc is required for Custom Install You can select items you want to install in Select Software screen Follow the steps below to display the Select Software screen 1 Insert the TM T20II Software amp Documents Disc into the computer The TM T20II Software Installer is automatically read and the EPSON TM T20II Software Installer screen appears Click the Install Now button Note The displayed language can be changed from Select language When the TM T20II Software Installer is not automatically read double click the
67. ribed below Item Description Resize When checked the image can be resized Ifthe image size is bigger than the paper width and its size is not changed any part that doesn t fit the paper is cut off Image width Setup the image size after resizing Unit mm 48 TM T20II Software Installer Software User s Manual Using the Printer Driver Item Description Half toning Setup the half toning type Select from Dither Error Diffusion None Brightness Setup the brightness Select from 5 levels Density Setup the printing density 6 Click Set The logo is registered to the driver When printing the logo is printed at the position set in the APD5 utility Epson M RT jm Advanced Method Ly User Defined Paper Setting on page 49 Ly Barcode Printing on page 51 fy 2 dimensional symbol Printing on page 51 cy Coupon Printing on page 52 cy Buzzer Settings on page 53 L O U O UU O T Other Convenient Functions on page 54 User Defined Paper Setting Regular paper size can be printed using the user defined paper setting It cannot expand reduce according to the printer s paper width 49 TM T20II Software Installer Software User s Manual Using the Printer Driver Select User Defined Paper of the APD5 utility to setup user defined paper _APDS Utility Ver 5 Logo Layout Barcode 2 dimensional symbol Electroni
68. rs click the Continue button The EPSON OPOS ADK for NET uninstallation confirmation screen appears Click the Yes button The uninstallation of the EPSON OPOS ADK for NET starts The completion screen appears Click the Finish button to complete the uninstallation Uninstalling the JavaPOS ADK 1 EI EI EI Quit all applications running on the computer Select Start Control Panel Uninstall a program EPSON JavaPOS ADK Click Uninstall For information of the differences in screen selections based on the OS versions LY See Differences Depending on the OS on page 9 When the User Account Control screen appears click the Continue button The Uninstall Epson JavaPOS ADK screen appears Click the Uninstall button The uninstallation of the EPSON JavaPOS ADK starts The completion screen appears Click the Done button to finish the uninstallation 40 TM T20II Software Installer Software User s Manual Using the Printer Driver Using the Printer Driver This chapter explains how to use the major functions of the printer driver Printer Driver Access Methods and the Application Range Depending on how you access the printer driver the application range of the settings you make on the printer driver varies L Accessing the printer driver from the printer driver s Print menu The print settings you made on the printer driver are applied to the print settings of the all users configured on the computer You mu
69. sage Installing device driver software appears on the task tray and the setup is automatically started Proceed to Step 10 when the setting is finished When you connect the printer using an interface other than USB or when installing the driver without connecting the printer click the Next button When the installation is completed the Installation Finished screen appears When conducting test print Click the PrintingTest button When the test print is finished click the Finish button to end the installation When exiting the installation Uncheck the Run TM T20II Utility Then click the Finish button to end the installation When setting the printer using TM T20ll Utility Check the Run TM T20Ill Utility checkbox the box is checked by continuously default Click the Finish button to end the installation The TM T20II Utility starts to run LF See TM T20II Utility on page 55 qj EPSON TM T20II Software Installer Ver il Installation Finished The installation of the software has finished The following software was installed Advanced Printer Driver Ver TM T2011 Utility Ver m Please run a printing test for the Advanced Printer Driver if necessary EPSON TATZO Receipt v Printing Test Please set up the printer if necessary Fun T 72011 Utility lt Back Cancel 17 TM T2O0II Software Installer Software User s Manual Installation This is the end of the printer driver installation For
70. se Serial USB Ethernet from Port Type under 3 Communication Settings Necessary settings are done according to the interface 2 Printer 3 Communication Settings 4 Apply Sat as Default Printer Model Par i Pi USB EPSOM TM Ea Receipt j l Save Settings ejela 24 TM T20II Software Installer Software User s Manual Installation Port type Item Description COM Communicate with serial port Set the following communication setting Port Specify the number of serial port used for connecting the printer Baud Rate Specify the baud rate Parity Specify the parity Stop Bits Specify the stop bits Flow Control Specify the method of data flow between the computer and the printer Data Bits Specify the data bits USB Communicate with USB port Set the following communication setting USB Port Specify the USB port used for connecting the printer Usually no setting is required Ethernet Communicate with Ethernet port Set the following communication setting Ethernet Port Specify the Ethernet port used for connecting the printer Usually no setting is required IP Address Set the IP address of Ethernet port the TM printer is connected Set to Printer Setup the IP address to the printer itself Le See Network Address Setting for Ethernet Printer on page 18 Note When path through connection is used by the driver of APD4 customer display adjust the TM printer s communication s
71. st have administrative privileges to make the settings L Accessing the printer driver from the printer driver s Properties The print settings you made on the printer driver are applied to your print settings only They are not applied to the settings of other users This method is recommended L Accessing the printer driver from the application s print setting menu The print settings you made on the application are applied to the application only The settings are canceled when you quit the application When you start the application again the print settings configured in the printer driver s properties are applied Accessing from the Printer Driver s Print menu 4 Printers and Faxes 4 ap See what s printing kaf EPSO Microsoft y XPS Set as default printer document Printing preferences Writer Printer properties Create shortcut Troubleshoot Remove device Properties 41 TM T20II Software Installer Software User s Manual Using the Printer Driver Accessing from the Printer Driver s Properties 4 Printers and Faxes 4 mp EPSON TM E Receipt Properties i d cul i General Sharing Pots Advanced Color Management Secunty Device Settings Version EPSON See what s printing licrosoft Sp EPSON TM lll Receipt TM TE v Set as default printer Receip Printing preferences Writer Location Comment Printer properties Create shortcut Troubleshoot Mo
72. stall the EPSON OPOS ADK for NET EI EI DI EI The EPSON OPOS ADK for NET x xx x InstallShield Wizard screen appears Select the language and then click the Next button The Welcome to the InstallShield EPSON OPOS ADK for NET screen appears Click the Next button The License Agreement screen appears Read the content and select the I accept the terms in the license agreement Click the Next button The Setup Type screen appears Select Developer and then click the Next button EI EI EI Click the Browse button to change the default installation location 28 TM T20II Software Installer Software User s Manual Installation The Setup Type screen appears Select the port and click the Next button The Start Copying Files screen appears Click the Next button to start the installation The InstallShield Wizard Complete screen appears Click the Finish button When the installation is completed the Installation Finished screen appears Then click the Finish button to end the installation S 6 Cl EI EI EI EI d EPSON TM T201 Software Installer Ver Installation Finished The installation of the software has finished The installation of the following software was executed OPOS ADK far NET Ver Please run a printing test for the Advanced Printer Driver if necessary Please set up the printer if necessary C Run TM T20II Utility This is the end of the OPOS ADK for NET installation Installing
73. stallation of the following software was executed Advanced Printer Driver Ver Sample and Manual Please run a printing test for the Advanced Printer Driver if necessary __prntnorest _ Please set up the printer if necessary fun 172011 utility lt Back Cancel This is the end of the printer driver installation 26 TM T20II Software Installer Software User s Manual Installation Installing the OPOS ADK B EI 3 OR CI CI EI EI II G Insert the TM T20II Software amp Documents Disc into the computer and follow the steps LY See Displaying the Select Software Screen on page 22 Check the OPOS ADK Ver x xx Clear the check box for the items you do not want to install Click the Next button The Start Installation screen appears The driver and utility to be installed are listed Click the Install button to start the installation The Choose Setup Language appears Select your language and click the Next button The EPSON OPOS ADK for TM T20II Version x xx xxx appears Click the Next button The Software License Agreement screen appears Read the content and select the I accept the terms in the license agreement Then click the Next button The Select Registry File screen appears Click the Next button The Setup Type screen appears Select Developer and then click the Next button Click the Browse button to change the default installation location The Start Copying Files screen appears Click the
74. sult Setting Description Automatically restore the settings To have printer settings automatically restored using the previously created when replaced with a new printer backup file when the printer fails and is replaced with a new printer Display confirmation message befor To display the confirmation message asking if you want to restore the settings executing automatic restore before execution of automatic restoration Display the restoration result To display the success failure result on the screen when automatic restore is executed Acknowledgements TM T20II Utility incorporate compression code from the Info ZIP group This is version 2009 Jan 02 of the Info ZIP license The definitive version of this document should be available at ftp ftp info zip org pub infozip license html indefinitely and a copy at http www info zip org pub infozip license html Copyright c 1990 2009 Info ZIP All rights reserved For the purposes of this copyright and license Info ZIP is defined as the following set of individuals Mark Adler John Bush Karl Davis Harald Denker Jean Michel Dubois Jean loup Gailly Hunter Goatley Ed Gordon Ian Gorman Chris Herborth Dirk Haase Greg Hartwig Robert Heath Jonathan Hudson Paul Kienitz David Kirschbaum Johnny Lee Onno van der Linden Igor Mandrichenko Steve P Miller Sergio Monesi Keith Owens George Petrov Greg Roelofs Kai Uwe Rommel Steve Salisbury Dave Smit
75. t Copyright C Seiko Epson Corporation 2013 All rights reserved 10 TM T20II Software Installer Software User s Manual Overview The Manuals screen appears Click the manual button you want to see 9 EPSON TM T20II Software Installer Ver IE Manuals Click the button for the manual that you want to open Adobe Reader is required to open the manual To check the installation procedure see software user s Open Software User s Manual manual m z 2 If Adobe Reader is not installed Open Technical Reference Guide English Only you can download it from here Get Adobe Reader Open ESC POS Quick Reference English Only Getting the URL of Epson Support Website The website provides a variety of product information and the latest driver download service Insert the TM T20II Software amp Documents Disc to the computer The TM T20II Software Installer is automatically read and the EPSON TM T20II Software Installer screen appears Click the Support button When the TM T20I Software Installer is not automatically read double click the TMInstallNavi exe icon in the TM T20II Software amp Documents Disc d EPSON TM T20II Software Installer Ver im Install Now Manuals TM T201 i Exit Copyright C Seiko Epson Corporation 2013 All rights reserved 11 TM T20II Software Installer Software User s Manual Overview 2 The Support Information screen appears Click the button of your area The URL
76. te window appears click on the Finish button When Yes I want to restart my computer now is selected the computer will restart Uninstalling the OPOS ADK 1 CI N CI CI EI EI Quit all applications running on the computer Select Start Control Panel Uninstall a program EPSON OPOS ADK Version x xx Click Uninstall For information of the differences in screen selections based on the OS versions LY See Differences Depending on the OS on page 9 When the User Account Control screen appears click the Continue button The EPSON OPOS ADK uninstallation confirmation screen appears Click the Yes button The Information screen appears Click the Yes button The ADK Selection screen appears Click the Next button The Confirm Deletion screen appears Click the Start button The uninstallation of the EPSON OPOS ADK starts The Uninstall Complete screen appears Click the Finish button When Yes I want to restart my computer now is selected the computer will restart Uninstalling the OPOS ADK for NET Quit all applications running on the computer 39 TM T20II Software Installer Software User s Manual EI EI EI Installation Select Start Control Panel Uninstall a program EPSON OPOS ADK for NET x x x Click Uninstall For information of the differences in screen selections based on the OS versions LY See Differences Depending on the OS on page 9 When the User Account Control screen appea
77. the JavaPOS ADK Note To install the JavaPOS ADK Java Runtime Environment and Java Advanced Imaging API are required Make sure to install the above software before installing JavaPOS ADK 1 Insert the TM T20II Software amp Documents Disc into the computer and follow the steps Z See Displaying the Select Software Screen on page 22 Select the JavaPOS ADK Ver x xx x Clear the check box for the items you do not want to install Click the Next button The Start Installation screen appears The driver and utility to be installed are listed Click the Install button to start the installation 29 TM T20II Software Installer Software User s Manual FI N II EI CI CI EI EI EI Installation The EPSON JavaPOS ADK x xx x screen appears Select the language and then click the OK button EPSON JavaPOS ADK az The Introduction screen appears Click the Next button The License Agreement screen appears Read the content and select the I accept the terms in the License Agreement Click the Next button The Choose JVM screen appears Click the Next button The Choose Install Set screen appears Select Developer and then click the Next button The Choose Folder Location screen appears Click the Next button The Choose your communication screen appears Select the port and click the Next button The Location for jpos xml screen appears Click the Next button The Pre Installation Summary screen appears
78. tional buzzer is used and the buzzer pattern settings Configure as follows 1 Click the Optional Buzzer menu Select whether or not the buzzer is used Optional External Buzzer Settings Enable Buzzer Pr Disable Buzzer Do not use the external buzzer Go to step 4 Enable Buzzer Use the external buzzer Go to step 3 76 TM T20II Software Installer Software User s Manual TM T20I1 Utility Specify when the optional buzzer sounds and the buzzer pattern Optional External Buzzer Settings Disable Buzzer When an error occurs Continuous BA When automatic paper cut activates Pattern A Test When specified pulse 1 2 pin occurs PattemA Ooo When specified pulse 2 5 pini occurs pattemB os e Setting Description When an error occurs Configure the buzzer setting when an error occurs When automatic paper cut activates Configure the buzzer setting when automatic paper cutting takes place When specified pulse 1 2 pin occurs Configure the buzzer setting when the specified pulse is generated When specified pulse 2 5 pin occurs Configure the buzzer setting when the specified pulse is generated Buzzer Test the buzzer Select a sound pattern To test the buzzer sound click the Test button 4 Click the Set button The settings are reflected in the printer Communication I F Settings This utility allows you to make printer commun
79. transportation devices related to aviation rail marine automotive etc disaster prevention devices various safety devices etc or functional precision devices etc you should use this product only after giving consideration to including fail safes and redundancies into your design to maintain safety and total system reliability Because this product was not intended for use in applications requiring extremely high reliability safety such as aerospace equipment main communication equipment nuclear power control equipment or medical equipment related to direct medical care etc please make your own judgment on this product s suitability after a full evaluation Aim of the Manual This manual provides information on how to use TM T20II Software amp Documents Disc for the product users or development engineers who use the software TM T20II Software Installer Software User s Manual Contents Contents Cautions and Trademarks CAWHONS aga ratati a n A a e eee ae ae ee oe oe A 2 Trademarks rcer ak cprtere od 9 6 ole gete se eee 2 ESC POS Command System 2 FOr Sale me e e ooh ee Caan eee yaaa E a 3 Key 10 SIDO i gc oe essan neie be aes 3 Restrichon Or USE ppg et aha a a i i 3 Aim of the Manual 0 0 0 0 0000 3 Overview TM T20II Software Installer 6 Drivers and Utilities to be Installed 6 SUPPO Oo si ae eae a 2 a e ee ee oe ee ee 7 Restrictions on Using Multiple Drivers o
80. ttings to the Printer 82 Acknowledgements 00000005 83 Application Development Information How to Control the Printer 85 N N DN REEERE GO A ETT gi e EEEE 85 ESC POS Commands 008 86 Sorina LOCOS sce wee eb etnnenn AAG e eh E 86 Downloade 4 4 4 4 4 6 5 0840604 ae ea eee bh e 87 TM T2O0II Software Installer Software User s Manual Overview Overview This chapter describes the specifications of TM T20II Software amp Documents Disc TM T20Il Software Installer TM T20I Software Installer allows you to install various drivers and utilities for the TM T20II printer Drivers and Utilities to be Installed Drivers m Advanced Printer Driver Ver5 Windows printer driver The following versions are provided L Advanced Printer Driver Ver 5 xx UPOS Stands for Unified Point of Service This is the standard specification of POS market which defines drivers for controlling POS peripheral devices in various operation environments The following drivers are provided L OPOS ADK Li OPOS ADK for NET _J JavaPOS ADK for Windows Utilities m L TM T20II Utility Allows you to check and configure the TM T20II settings EpsonNet Config This utility is for configuring network settings such as IP address of the printer connected to an Ethernet EpsonNet Simple Viewer This allows you to monitor the status of the printer connected to a network printer or cli
81. tware Installer Software User s Manual Installation The property screen of the printer appears Select the Ports tab and then click the Configure Port button aan EPSON TM T201 Receipt Properties ye EPSON TM T20I Receipt Print to the following portis Documents will print to the first free checked port Description Printer Serial Port Print to File EPSON TM T70II Receipt Virtual printer port for Local Port Microsoft APS Document Write ESDPRTOOL EPSON TM T200 Receipt O WWLS XHLS Client Side Rendering 4 nm Add Port Delete Port Configure Port Enable bidirectional support a E Enable printer pooling The Configure Port screen appears Set a configure port while referring to the screen and click the OK button Configure Port Configure Network Printer Common Settings Status Monitoring Always Monitor End af Print Timeout 150000 Operation Wait Wait for Completion Port Settings Port Name Print Error Control Notify OS On Error Delete Print Job On Error Help Status Monitoring Enable or disable printer status monitoring 4 The display returns to the Properties screen When you click the OK button the changes you made become effective 21 TM T2O0II Software Installer Software User s Manual Installation Custom Install AN Contion When installing connect just one printer Do not connect multiple printers L When you are prompted whether to
82. ty The following screen appears Click the Add Port button TM T20II Utility Select Printer and Click 0K Button If the port to which the printer is connected is not listed add it by dicking the Add Port button Model Port Information TM T2011 001 57 TM T20II Software Installer Software User s Manual TM T20I1 Utility The Add Port screen appears Configure the port to be added Then click the OK button Select the communication interface to TM T20II Communication speed Parity Data Bit Stop Bit Communication test Note LI Ifthe communication with the port failed an error message appears In such case you cannot add the port Make sure the printer is connected properly and check your communication settings LI Clicking the Communication test button displays the communication result on the screen It does not conduct a test print TM T2OII Utility Communication test completed successfully LI Serial Setting Description Port Selects the serial port of the computer you use Search Searches for available serial ports Parity Configures the parity Data Bit Configures the bit length Stop Bit Configures the stop bit Virtual Port Settings Starts the Virtual Port Settings tool For details see the manual for the Virtual Port Settings tool Communication test Runs a communication test
83. uble click the TMInstallNavi exe icon in the TM T20II Software amp Documents Disc The License Agreement screen appears Read the content and select the I accept the terms in the license agreement Then click the Next button 34 TM T2O0II Software Installer Software User s Manual EI ES Installation The Update Software screen appears The system is checked and existing driver and its version are displayed Click the Next button E EPSON TM T200 Software Installer Ver 0 eo Update Software In order to use TM T201I the software must be updated to the version s listed under Version after update or higher The following software for TM printer is already installed on your computer Software Name Version after update OPOS ADK The Select Printer Language Resident Character screen appears Select the language of your printer and click the Next button The Select Software screen appears Check the checkbox for the drivers and utilities you want to install and uncheck the checkbox for those you do not need Items that require updating are automatically selected E EPSON TM T2UII Software Installer Ver BE pc Select Software Select the software you want to install Advanced Printer Driver Ver H sample and Manual IFIOPOS ADK Ver E Ba E JOPOS ADK for NET Ver all JavaPOS ADK Ver E TM T201 Utility Ver i Coupon Generator L EpsonNet Config Ver IC EpsonNet Simple Vie
84. utton Storing Logos First Key code Selection Mode Image File Size Byte Ad m EL EL Delete Preview Test print Change Logo Mode Key code Management E Additional logo size 0 KB Used amount 0 KB 256 KB Scaling ini kd Alignment Left kd Save to File Store to Printer Specify the image data to be used as a logo A file size of 2047 W x 831 H pixels dots or less can be specified and the format can be bmp jpeg gif or png If the logo width is greater than the paper width a warning message will appear Click the OK button and reduce the logo size in the Logo Edit screen of step 3 Look in E Documents L a Recent Places Desktop Pee Computer File name Files of type All Images BMP JPG JPEG JPE JFIF LE 67 TM T20II Software Installer Software User s Manual TM T20I1 Utility The Logo Edit screen appears Edit the logo image while checking the image previewed on the upper portion of the screen When finished click the OK button Logo Edit EPSOM png Original mage EPSON You can edit the followings Setting Description Image width Specifies the width to which the image is resized in mm Resize Specifies whether or not the image is resized If the image width is greater than the paper width and resizing is not specified the part of the image that exceeds the paper width will be cut off Half toning
85. ware Installer Ver i Select Software Select the software you want to install Adv IC OPOS ADK Ver P OPO ADK for NET Ver JavaPOS ADK Ver S E TM T2011 Utility Ver IC Coupon Generator EpsonNet Config Ver EpsonNet Simple Viewer Ver IC TM Virtual Port Driver Ver m HDD Used Space MB m The Start Installation screen appears Click the Install button The EPSON APD5 Sample amp Manual InstallShield Wizard screen appears click the Next button The License Agreement screen appears Read the content and select the I accept the terms in the license agreement Then click the Next button The Ready to Install the Program screen appears Click the Install to install the sample programs and manual of Advanced Printer Driver The InstallShield Wizard Complete screen appears Click the Finish button The Installation Finished screen appears Click the Finish button to finish the installation EI O O N C EI This is the end of the installation of the Advanced Printer Driver manual Configuring IP Address of the Printer Driver The following explains how to configure the printer s IP address for the installed printer driver This will change the Epson port setting 1 Select from Start Control Panel Hardware and Sound and open Printers and then right click the target printer driver and select Properties Z See Differences Depending on the OS on page 9 20 TM T20II Sof
86. wer Ver m ITM Virtual Port Driver Ver m The installer checks the validity of the update or the combination of the drivers A warning message is displayed if the combination can cause the printer to malfunction Check the screen for the warning message and click the Next button When you click the Next button with the warning message displayed a warning screen appears Click the OK button to proceed to Step 7 35 TM T20II Software Installer Software User s Manual Installation Note If you select more than one drivers to install them under Windows 2000 you will be prompted that this may cause the printer to malfunction Under Windows 2000 you can install only one driver Message Warning The combination of the currently installed software and the software about to be installed may cause the printer to malfunction Please update the currently installed software The Start Installation screen appears Check that the listed items to be installed are correct and click the Install button installation 8 When the installation is finished the Installation Finished screen appears Click the Finish button to end the Un installation Uninstall the printer driver Uninstall the TM T20II Utility Uninstall the EpsonNet Config Uninstall the Epson TM Virtual Port Driver Uninstall the EpsonNet Simple Viewer Uninstall the OPOS ADK Uninstall the OPOS ADK for NET L O U U U UU U Uninstall the JavaPOS ADK
87. you want to copy coupon settings on another printer refer to TM T20II Utility User s Manual Saving the Printer Settings to a File Save the settings as follows 1 Click the Backup Restore menu Select the setting items to be saved as a file from the Option Setting Backup Restore Backup Option W Stored logo data 4 Printer settings Restore Description a ID Li IT Automatic Restore Settings Automatically restore the settings when replaced with a new printer Display confirmation message before executing automatic restore Display the restoration result L Stored logo data Saves the logo data stored on the printer In this step data is not acquired from the printer but the data in the logo store file TLG file is saved 7 See Logo Store File on page 69 L Printer settings Saves all the set values of the printer Paper reduction settings Font settings font replacement code page and international character set settings Print control settings paper width print speed density etc Automatic paper cut setting Optional buzzer settings Click the Backup button A backup confirmation message will appear Click the Yes button If Stored logo data was selected in step 2 Go to step 4 If Stored logo data was not selected in step 2 Go to step 5 81 TM T20II Software Installer Software User s Manual TM T20I1 Utility 4 The Select Logo File screen appears Th

TM-T20II Software User`s Manual - Epson America, Inc.

Contents

Download Pdf Manuals

Related Search

Related Contents