COLOR TELEVISION
Contents
1. GRUNDIG COLOR TELEVISION XENTIA 72 FLAT MF 72 490 DO LBY 21837 941 0400 13 16 18 CONTENTS XENTIA 72 Flat MF 72 490 DOLBY Special features of your TV set Scope of delivery Installation and Safety At a Glance The front of the TV set The back of the TV set The remote control Connection and Preparation Sample connection with video recorder satellite receiver and decoder Connecting a PC Connecting a hifi system or active loudspeakers Putting batteries into the remote control Settings Switching the television on off Programming TV channels Easy Dialog System The Easy Dialog System The Dialog Center O perating the Easy Dialog System CONTENTS Programming the Remote Control Programming function levels Reset Customer Information Technical data Service information for the specialized dealer Contact assignment for the EURO AV socket Correcting Problems Yourself 72 FLAT MF 72 490 DOLBY GA Special features of your TV set Technology Super flat 72 cm colour picture tube visible picture 68 cm 100 Hertz technology GRUNDIG Megalogic M egalogic possibilities Perfect compatibility with the Megalogic video recorder No troublesome programming of channel positions By starting playpack on the video recorder the video programme position on the TV set will be automatically selected Equipment Dolby Surround VGA interface for connecting a PC M egatex2. N Ul 26 CORRECTING PROBLEMS YOURSEF If the remedies below do not lead to a good result contact an authorised G RUN DIG dealer Please consider that problems can also be caused by external appliances such as video recorders and satellite receivers Problem no picture no audio no mains voltage mains cable connected mains switch on TV set in standby Switch on with remote control TV setis noton a Switch to another occupied AV channel position channel position picture is bright grainy or blue aerial cable aerial cable connected butno programme can be seen check aerial system no TV channel programmed start channel search picture contrast incorrect picture settings change brightness contrast or color settings problem is with the broadcaster test another channel poor picture and or sound interference from other appliances change the position of the household appliances mobile appliances telephones etc double image reflection channel setting automatic or manual channel setting fine tuning aerial have aerial cable or device checked no color color intensity is on minimum adjust color upward TV standard setting Select proper color standards if setting possibility is available problem is with the broadcaster test another channel CORRECTING PROBLEMS YOURSELF colors wrong color spots strong magnetic field from increase distance of speaker Speakers or other to TV set with permanent color spo
3. and end setting with TXT or if you want to watch television immediately switch off menu with TX T A menu with informati on on the Easy Dialog System appears Press TX T to switch to TV operation Note It is possible to call up all functions of the IN STA LLATIO N menu also later in the Easy Dialog Centre under IN STA LLATIO N ENGLISH EASY DIALOG SYSTEM The Easy Dialog System Your TV set is equipped with the Easy Dialog System That means that operating instructions are not as is usual in a printed manual but rather appear on the screen as dialog fields The Dialog Centre The Dialog Centre is the control centre for your TV set Here you can make a variety of settings call up information and get specific help for operating your television e g info about the remote control a list of key words tips and tricks Justtry itout You can t do anything wrong 1 Call up the Dialog Centre witht i and then OK GRUNDIG REMOTE CONTROL INDEX iss PARENTAL LOCK 1 TV PROGRAM M E CHART AUTOMATIC PROGRAMMING ACI Megalogic ATS ES AUDIO VIDEO RE RECORDING To 2nd page OK Call up Q Help TV At every step of operation the dialog symbols show which buttons can be 18 used to carry out particular functions EASY DIALOG SYSTEM Operating the Easy Dialog System V A Qe OK Move the yellow bar up down W ith two paged m
4. the TV set from standby select channels step by step cursor up down Volume cursor left right Changes and activates various functions Call up DIALOG CEN TER with i and OK TV G uide info about current broadcast Teletext mode TV mode switch over Sound on off mute see next page A GLANCE MEN D Picture settings calls up PICTURE SETTIN G S menu Clock time on off Still picture E Sound settings calls up the SO UN D SETTING S menu Colour contrast Q Brightness PIP TV picture in teletext Brief instructions EJ Picture format switch over AUX Preselection button for various functions ENGLISH 12 A GLANCE a Operating a video recorder satellite receiver DVD player To control a GRUNDIG video recorder set the slide switch TV SAT VCR DVD to VCR To control a GRUNDIG satellite receiver set the slide switch TV SAT VCR DVD to SAT To control a GRUNDIG DVD player set the slide switch TV SAT VCR DVD to DVD 0 Switches to standby 1 0 Select channel positions and switch on from standby Select channels step by step Recording Playback Pause Stop Reverse picture search Forward picture search Fast reverse Fast forward Y2v Am7 veo Note Just try out which functions of your GRUN DIG device can be controlled Functions which cannot be controlled on your GRUNDIG device ca
5. cal safety Put the TV set on an even and hard surface Do not place objects for example newspapers on the TV set or place the set on a cloth cover etc Do not place the TV set close to the heating or in direct sunshine as it could overheat Heat build up can be dangerous and is detrimental to the service life of the equipment From time to time have a technician come to clean the inside of the set Keep the TV set away from magnetic fields for example stereo speakers INSTALLATION AND SAFETY Do not open the TV set under any circumstance The manufacturer will offer no liability for damage resulting from unauthorized tampering iege Be sure that the mains cable is not damaged at any time 1 Storms represent a danger for every type of electrical device Even if the set is switched off it could be damaged by a lightning strike hitting the mains and or the aerial lead Therefore always disconnect the mains plug and aerial plug when there is a storm W hen cleaning the screen use only a soft damp cloth Use only clean water This TV set combines technology and ecology in a well thought out overall con rae cept Only ecologically high quality materials are used The packaging is made almost entirely of 100 recycled paper and the portion of plastic has been reduced to a minimum The batteries supplied have no mercury or cadmium The number of plastic types has been reduced in order to ensure high qual
6. enus the second page will be turned to Change settings Calls up or confirms selected functions Back to TV picture Acces to the Dialog Centre with i and OK one page back Calls up brief instructions ENGLISH ite 20 PROGRAMMING THE REMOTE CONTROL You can use the TP 850 C remote control notonly with the TV set butalso with a video recorder a satellite receiver and a DVD player The remote control is programmed in the factory for GRUN DIG appliances and those of the same construction The TP 850 C can learn the remote control commands from any infrared con trolled appliance also from other companies These remote control commands are for the function levels for satellite receivers SAT video recorders VCR and DVD players DVD For this you need the other appliance s remote control Note The TV function level is programmed only for GRUN DIG TV sets and cannot be reprogrammed In exceptional cases it could happen that the TP 850 C can not learn the functions of an appliance made by an other company PROGRAMMING THE REMOTE CONTROL Programming function levels 1 Move the slide switch to the function level SAT VCR DVD you want to programme The display of the selected function level lights up for about three seconds 2 Simultaneously press AUX and 3 until the display of the selected func tion level lights continuously 3 Point both remote controls at each other at a d
7. hannels 501 541 ENGLISH N CUSTOMER INFORMATION Service information for the specialized dealer The TV set may be operated only using the mains cable set supplied It prevents mains interference and is an integral part of the appliance approval For replacement purposes please order only the mains cable set with the designation GWN 9 22 part number 8290 991 316 from an approved after sales service C The product meets the requirements of the following EU guidelines 73 23 EEC guideline on electrical equipment for use with certain voltage limits 89 336 EEC guideline on electromagnetic compatibility The appliance complies with the standards EN 60065 EN 55013 EN 55020 CUSTOMER INFORMATION Contact assignment for the EURO AV socket If you want to connect an other appliance to the TV set e g computer amplifier your specialist dealer can establish a proper connection using the 20 2 following connection table 1 audio output right 2 audio input right 21 19 1 3 audio output left 4 audio ground 5 blue ground 6 audio input left 7 RGB blue input 8 Switching voltage 9 green ground 10 data line MEGALO 11 RGB green input 12 13 red ground 14 ground 15 RGB red input S Video Chroma 16 RGB switching voltage 17 video ground 18 RGB switching voltage ground 19 video output 20 video input S Video luminance 21 Shielding ground ENGLISH
8. ing the TV set to standby 1 Press on the remote control once Switching the TV set off definitely 1 Press lO on the TV set or press on the remote control twice The ecologic switch must be activated Dialog Centre Special Functions menu Note The ecologic switch is not activated if a timer is programmed or the copy mode activated Switching on again is only possible with lO on the TV set SETTINGS Programming TV channels The TV set is equipped with the automatic tuning system ATS euro plus which carries out channel position assignment for you 1 After switching on the TV set select he English dialog language and con firm with OK Note If the Select dialog language page does not appear press i and then lt to display the Dialog Centre menu Use A X7 to select the AUTO MATIC PRO GRAMMING row then confirm with OK Use A or YY to select the Complete Reprogramming when moving house row then confirm with OK Confirm your country with OK The automatic tuning system is started Depending on the number of channels which can be received the search can take one minute and more W hen the automatic allocation of the channel positions is completed a table with information aboutthe installation menu is displayed Press TX T to exit this table The IN STALLATIO N menu is displayed Make desired settings
9. istance of about five centi meters 4 Press the button on the TP 850 C which is supposed to be programmed The display of the selected function level flashes once 5 Press the function button which is supposed to be learned on the original remote control until the display of the selected function level on the TP 850 flashes twice Note If the function could not be learned all four displays on the TP 850 will flash twice In this case repeat steps 3 to 5 6 To finish the settings simultaneously press AUX and 3 The display flashes twice ENGLISH N E 22 PROGRAMMING THE REMOTE CONTROL Reset You can reset the remote control back to the settings it was given in the factory Resetting a function level 1 Move the slide switch to the function level SAT VCR DVD which is sup posed to be reset 2 Simultaneously press PIP and 6 until the display of the selected function level flashes twice Resetting all function levels except TV 1 Move the slide switch to the TV function level 2 Simultaneously press PIP and 6 until the displays of the function levels SAT VCR DVD flash twice CUSTOMER INFORMATION Technical data Power supply voltage 220 240 V 50 60 Hz control range of the power supply unit 190 264 V Power consumption in operation 135 W in standby 5 W Sound output stage 2 x 20 Watt music 2 x 10 Watt sine Reception ranges C01 C99 special c
10. ity recycling when the set is put out of use all larger plastic parts are marked To facilitate maintenance work and recycling this TV setis easy to disassemble ENGLISH A GLANCE The front of the TV set i P SVIDEO VDEOIN L AUDIO R Q aa 10 Switches the TV set on off i Volume P Select channel up down S VIDEO SVHS video input for camcorder VIDEO IN Video input for camcorder L AUDIO R Audio input for camcorder Q Headphones connector ATA GLANCE The back of the TV set Mains cable connection socket VGA L AUDIO IN R PC connection socket AV 1 Euro AV socket AV2 Euro AV socket R AUDIO L O utput sockets for hifi system Aerial input for house aerial ENGLISH 10 A GLANCE NENNEN e gt m PIP Aux o 9 Q OQ GRUNDIG The remote control You can use the TP 850 C remote control supplied not only with the TV set but also with a video recorder a satellite receiver and a DVD player Note Your TV set is equipped with a programmable remote control Programming of the remote control is described from page 20 Operating the TV set To operate the television move the slide switch TV SAT VCR DVD into the TV position TXT Switches the TV set to standby Channel selection and switch on the TV set from standby select AV position enter teletext page numbers Switching on
11. laptop W hen using a laptop ithas to be first connected and then switched on CONNECTION AND PREPARATION Connecting a hifi system or active loudspeakers Instead of using the television speakers as front speakers you can use the loud speakers of your hifi system or active front speakers 1 Connectthe hifi system or the active left right speakers to the L AUDIO R Cinch sockets Putting batteries into the remote control 1 Open the battery compartment by pulling off the cover 2 Insert the batteries Mignon i e UM 3 or AA 2 x1 5 V O bserve the polarity when inserting the batteries Note If your television does not react to the remote control commands correctly then the batteries could be used up Remove empty batteries There is no liability for damage caused by leaking batteries Environmental note The batteries even those free of heavy metal cannot be disposed of in normal household rubbish Used batteries must be disposed of in used battery collection containers in businesses or be taken to public waste disposal facilities ENGLISH 16 SETTINGS Switching the TV set on off An LED next to the mains switch indicates the current operating mode by a corresponding colour Green Operation Yellow Standby EPG mode copy mode Red Standby energy saving mode timer programmed Switching the TV set on 1 Press lO on the TV set The TV picture appears on the screen Switch
12. n easily be programmed see page 20 CONNECTION AND PREPARATION Sample connection with video recorder satellite receiver and decoder Videorecorder EURO AV VCR INPUT 2 Note To see what possibilities your television has for connecting external devices see the Easy Dialog System in the Audio Video connections menu Consult page 18 and onwards to see how to use the Easy Dialog System If your video recorder is equipped with M egalogic functions the video recor der and the TV set must be connected with the AV EURO cable which was included with the video recorder ENGLISH j UJ 14 CONNECTION AND PREPARATION Connecting a PC VGA You can use the TV setas a PC monitor The television set can set itself to the following input signals 640 x 480 Pixel 60 Hz 31 5 kHz 640 x 400 Pixel 70 Hz 31 5 kHz 640 x 350 Pixel 70 Hz 31 5 kHz 1 Connect VGA source e g computer games console to the VGA Socket using a commercially available VGA cable 2 Connectthe computer s audio output if available to the AUDIO sockets using a commercially available Cinch cable Note O ne of the above mentioned resolutions must be set on the PC see the PC s System control The display of a connected laptop computer must be switched off using the keyboard or the laptop s system control see the operating manual of the
13. t level 2 5 512 page memory Easy Dialog System TV Guide Retrofit options PIP Picture in picture Satellite receiver Under license from Dolby Laboratories Licensing Corporation DO LBY and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation XENTIA 72 FLAT MF 72 490 DOLBY Scope of delivery 1 TV set XENTIA 72 FlatMF 72 490 DOLBY 2 Remote control 3 2 batteries 1 5 V Mignon AA 4 User manual 5 Mains cable ENGLISH INSTALLATION AND SAFETY In order to assure that this high quality and easy to use TV set will be able to provide you with good service and pleasure for a long time to come itis impor tant that you observe the following points when installing the set This set has been designed for the reception and reproduction of picture and sound signals Any other use is explicitly forbidden The ideal viewing distance from the screen is 5 times the diagonal width of the screen External light shining on the screen adversely affects picture quality Assure thatthere is enough space inside a cabinet The TV set is designated for operation in dry rooms Should you nevertheless operate it outside make absolutely sure that it is protected against dampness rain water splashes N ever expose the TV setto any sort of moisture Do not place vessels filled with fluid vases or similar things on the TV set The vessel may tip over and the fluid may adversely affect electri
14. ts switch off the TV set with the mains switch and switch back on after after 10 minutes problem with terrestrial change appliance position magnetic field picture is there no sound volume at minimum or increase switch on volume speakers switched off volume regulation activated Select sound output via audio cinch socket via speaker if this possibility is available problem is with the broadcaster test another channel SAT mode check AV cable between TV set and receiver poor or no Teletext TV channel has no Teletext check with another channel or check aerial system possibly double image or reflection or fine tuning transmission signal too weak check aerial system picture grainy remote control does not work no optical connection point remote control at the TV set remote control batteries check or replace the batteries pay attention to polarity undefinable operating mode switch off TV set with the main power button for about 2 minutes After switching on child lock is activated enter secret number or number child lock appears on the menu combination 7038580 ENGLISH N Grundig Kurgartenstra amp e 37 D 90762 F rth http www grundig de
Download Pdf Manuals
Related Search