User`s manual (Canada version) VM343 Safe
Contents
1. e DO NOT expose it to direct sunlight or moisture e Avoid dropping the product or treating it roughly e Clean with a soft cloth e DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap e DO NOT use cleaning spray or liquid cleaners e Make sure the baby unit and parent unit are dry before you connect them to the mains again When you are not going to use the baby monitor for some time remove the rechargeable battery from the parent unit Store the parent unit the baby unit and the adapters in a cool and dry place Industry Canada Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference including interference that may cause undesired operation Privacy of communications may not be ensured when using this product The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met This product meets the applicable Industry Canada technical specifications RF radiation exposure statement The baby unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment The baby unit should be installed and operated with a minimum distance of 8 in 20 cm between the baby unit and all persons body Use of other accessories may not ensure compliance with FCC RF exposure guidelines This t2. eee 2 With the label THIS SIDE UP facing up Charge the parent unit battery Before use Positioning the baby monitor j Parent unit overview vte ch ai ee sian E E cannes aga de Connect and charge the When you have connected the parent unit Before use NOTE Overview lots inside the batt t t Mak l os slots inside the battery compartment Make battery and installed its battery for the first time or You may test the baby monitor before initial use This baby monitor is intended as an aid It is not a Baby unit overview sure the metallic contact is correctly oriented after power outage the parent unit powers on substitute for proper adult supervision and should not g and at regular times thereafter User s manual sete casts fen ee me Notes Oo automatically The battery icon indicates the a j Bak oe be used as such VM34 product S9 NOTES same room to test the product Make sure Never place or mount the baby unit inside the baby s 343 e Make sure the electrical outlets are not controlled e The parent unit battery is fully charged after the baby unit is at least 1 meter 3 feet away crib or playpen by wall switches 3 hours of continuous charging l from the parent unit e The power adapter are intended to be correctly e It takes longer to charge the battery when the l l l 1 Place
3. WQVGA 480x272 pixel Nominal Maximum power allowed by FCC effective range and IC Actual operating range may vary according to environmental conditions at the time of use Power requirements Parent unit 3 7V Li polymer battery Baby unit power adapter Input 100 240V AC 50 60Hz Output 6V DC 1A Parent unit power adapter Input 100 240V AC 50 60Hz Output 5V DC 1A Designed to fit your home VU And your life VTech Technologies Canada Ltd A member of THE VTECH GROUP OF COMPANIES VTech is the registered trademark of VTech Holdings Limited Specifications are subject to change without notice 2015 for VTech Technologies Canada Ltd All rights reserved 05 15 VM343_CA_CIB_V2 0 Document order number 91 008473 020 100
4. 3 Press W or A to choose Format then press SELECT 4 Press W or A to choose Fahrenheit or Celsius then press SELECT to confirm your selection The RBRC seal The RBRC seal on the lithium ion battery indicates that VTech Communications Inc is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives when taken out of service within the United States and Canada The RBRC program provides a convenient alternative to placing used lithium ion batteries into the trash or municipal waste which may be illegal in your area VTech s participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers Please call 1 800 8 BATTERY for information on Li ion battery recycling and disposal bans restrictions in your area VTech s involvement in this program is part of its commitment to protecting our environment and conserving natural resources RBRC and 1 800 8 BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation Vibration You can turn on the vibration feature so that the parent unit vibrates when e the baby unit detects sounds in SPLIT VIEW mode e the link between the parent unit and the baby unit is lost or e the temperature detected by the baby unit falls out of the preset temperature range
5. Q NOTE The parent unit is muted while in SPLIT VIEW mode Zoom You can zoom in or out while viewing image from baby unit in SINGLE CAM mode e Press Q to zoom in e Press and hold A V lt or P to move the zoomed image upward downward leftward or rightward correspondingly e Press Q again to zoom out Talk You can use the TALK function of the parent unit to comfort your baby in SINGLE CAM mode 1 Press and hold TALK on the parent unit The TALK light turns on 2 Speak towards the microphone on the parent unit Your voice is broadcast to the baby unit 3 Release the TALK key to stop the broadcast The TALK light goes off Important safety instructions When using your equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury including the following 1 Follow all warnings and instructions marked on the product 2 Adult setup is required 3 This product is intended as an aid It is not a substitute for responsible and proper adult supervision and should not be used as such 4 This product is not intended for use as a medical monitor 5 Do not use this product near water For example do not use it next to a bath tub wash bowl kitchen sink laundry tub or swimming pool or in a wet basement or shower 6 CAUTION Use only the batteries indicated in this manual There may be a risk of explosion if a wrong type of battery is used f
6. the screen displays the view of newly paired baby unit in SINGLE CAM mode The LED light on the new baby unit remains on baby unit flashes and the parent unit displays Y e If pairing fails the screen displays Pairing failed Try the pairing process again e Only one baby unit can be paired at a time Why does the parent unit beep The baby units may be out of range Move the parent unit closer to the baby units but not less than 3 feet If the parent unit is powered by the provided battery it may not have enough charge for the parent unit to perform normally Charge the battery in the parent unit for up to 3 hours If your parent unit is in SPLIT VIEW mode some of your baby units may detect sounds The temperature of your baby s room may be too high or too low Why does the parent unit beep vibrate frequently in SPLIT VIEW mode You may have set the sound sensitivity level to level 5 when the sound alert and vibration feature are turned on The parent unit notifies you of all sounds including background noise with beeps or vibrations Adjust the sound sensitivity to a lower level 6 Product purchased used serviced or shipped for repair from outside the United States of America or Canada or used for commercial or institutional purposes including but not limited to Products used for rental purposes or 7 Product returned without a valid proof of purchase see item 2 on the next
7. choose the desired baby unit or all baby units press V or Ato choose All CAM or CAM then press SELECT 4 Press W or A to choose the desired temperature then press SELECT to confirm your selection Cautions 1 Use and store the product at a temperature between 32 F and 104 F 2 Do not expose the product to extreme cold heat or direct sunlight Do not put the product close to a heating source 3 Batteries should not be exposed to excessive heat such as bright sunshine or fire 4 Make sure the baby unit s and the adapter cord s are always out of reach of the baby at least 3 feet away from the baby or crib to avoid a possible strangulation hazard 5 Never place the baby unit s inside the baby s crib or playpen Never cover the baby unit s or parent unit with anything such as a towel or a blanket 6 Other electronic products may cause interference with your baby monitor Try installing your baby monitor as far away from these electronic devices as possible wireless routers radios cellular telephones intercoms room monitors televisions personal computers kitchen appliances and cordless telephones Precautions for users of implanted cardiac pacemakers Cardiac pacemakers applies only to digital cordless devices Wireless Technology Research LLC WTR an independent research entity led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacema
8. off IESS T Or Me ee MIE CCOIETEVEO when your baby makes soft SPLIT i On when the speaker volume of the the baby unit use the parent unit to adjust the CAM represents out of range or is turned A then press SELECT to confirm sounds 9 NOTE parent unit is turned off Speaker volume microphone sensitivity of your baby the selected baby off a Level 2 Medium low If you mute the speaker while sound activation is on RE on or off the e Displays the speaker volume level unit The higher the sensitivity level unit number Turn on or off the parent unit sensitivity level then you hear a beep sound whenever the screen mode i iti itici H a turns on it di while adjusting the more sensitive the baby unit is in screen Adjust the sound sensitivity of The parent unit speaker Parent unit display icons detecting sounds for transmitting to IN Battery low at The battery level of J y me My ate ae l PE EE Battery status the parent unit Parent Unit the parent unit is very You can turn on or off the parent unit screen the baby unit eines Gods Monitori d Sees increase the speaker s Ya dicoieyswheneione sional p O m gt m animates low and needs to be without powering off the parent unit You can You can choose to hear sounds from the baby remains quiet when your ial laa ane strength is detected between the minon NG DARCY ENATOR Temperature recharged still hear sound from the baby unit unit all the time or to hear sounds that exceed baby makes soft
9. the baby unit at least 1 meter 3 feet oriented in a vertical or floor mount position The parent unit is turned on To shorten the charging 2 Slide ON OFF on the baby unit to turn it on away from your baby Safe amp Sou nd prongs are not designed to hold the plug in place if time turn the parent unit off while charging they are plugged into a ceiling under the table or e The standby time varies depending on the Atleast 1 meter __ Pan amp Tilt Full Color cabinet outlet sensitivity level you set your actual use and the 3 feet oy ic i i l e Make sure the parent unit the baby unit and the age of the battery _ l Video monitor 3 Align the battery compartment cover flat power adapter cord are out of reach of children against the battery compartment then slide Battery Battery it towards the center of the parent unit until it indicators status Clicks into place Connect the baby monitor The battery No battery Install the icon Is off is installed parent unit and b but operates battery displays using AC Charge without power or the interruption battery has at least been installed 30 minutes incorrectly 3 aiar 2 Place parent unit at least 1 meter 3 feet oT away from the baby unit ZO Light sensor 2 i Infrared LEDs Install the battery Upon initial u
10. 1 Press MENU when the parent unit is not in use 2 Press W or A to choose VIBRATION then press SELECT 3 Press V or A to choose On if speaker is off Always on or Off e On if speaker is off The parent unit vibrates only when the speaker of the parent unit is turned off e Always on The parent unit vibrates regardless of the speaker volume setting e Off The parent unit will not vibrate at all instance 4 Press SELECT to confirm your selection Rename the baby unit You can rename each baby unit Once the baby unit is renamed its new name together with the baby unit number will appear in the sub menu of below options e Sensitivity e Temperature e Rename e Pair unpair 1 Press MENU when the parent unit is not in use 2 Press W or A to choose RENAME then press SELECT 3 Press W or A to choose the desired baby unit then press SELECT 4 Press W or A to choose the desired name for the baby unit then press SELECT to confirm your selection FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instru
11. Press and hold to pair to the parent While viewing image press to zoom 13 Threaded socket e For wall mount installation use Parent unit lights Zoom Parent unit main menu icons Brightness The parent unit is Set the language Sound sensitivity table for reference Turn on or off the sound e While in a menu press to select a SEER e Displays when the camera at the You can change the brightness of searching for baby units You can select a language English French or Sensitivity Description activation i On when moderate or high signal Language hee feature strength is detected between the baby unit has zoomed in T T endlich the parent unit screen when the link is lost Spanish to be used in all screen displays Level 5 High High sensitivity level The parent unit continuously monitors the sound Hla tit image press and hold hold parent unit and the selected baby unit Temperature alert French or Spanish to be used in all 1 Press MENU when the parent unit is not in sensitivity ine aes unt T H level in your baby s room When the sound o move the image rightward Flashes when low signal strength is e Displays when the temperature screen displays ename p use Da J AE a E din activation mode is on the parent unit screen detected between the parent unit and alert is set on Neita e a E Pn Using the baby monitor 2 Press W or A to choose LANGUAGE then a Hoi eeynon turns on when the baby unit detects a sound e While in a menu press to re
12. aced in any area where proper ventilation is not provided Slots and Openings in the back or bottom of this product are provided for ventilation To protect them from overheating these openings must not be blocked by placing the product on a soft surface such as a bed sofa or rug This product should never be placed near or over a radiator or heat register 17 Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit Never spill liquid of any kind on the product 18 To reduce the risk of electric shock do not disassemble this product but take it to an authorized service facility Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the product is subsequently used 19 You should test the sound reception every time you turn on the units or move one of the components 20 Periodically examine all components for damage 21 Be aware of possible loss of privacy while using public airwaves Conversations may be picked up by other nursery monitors cordless phones scanners etc 22 Children should be supervised to ensure that they do not play with the product 23 The product is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowled
13. ctions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation To ensure safety of users the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product This product has been tested and found to comply with the FCC criteria The baby unit shall be installed and used such that pa
14. e baby unit and to establish connection with the parent unit Why doesn t Make sure the power is not my parent unit controlled by a wall switch charge while You may have used the battery for connected to AC power a long time Replace a new battery The screen is in black and white during nighttime or in a dark room This is normal due to external light sources Why is my screen in black and white Why do get glare or blurry display on my screen when viewing my baby at night During nighttime or in a dark room the surroundings and other interfering factors like lightings objects colors and backgrounds may affect the image quality on your parent unit screen Adjust the baby unit s angle or place the baby unit at a higher level to prevent glare and blurry display Why does the baby monitor produce a high pitched noise Limited warranty What does this limited warranty cover The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase Consumer or you that the Product and all accessories provided in the sales package Product are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the Product operating instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada The uni
15. ge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety SAVE THESE INSTRUCTIONS Monitor the temperature To monitor the temperature of your baby s room you can turn on the temperature alert feature on the parent unit It beeps whenever the temperature detected by the baby unit falls out of the desired temperature range Minimum temperature You can set the desired minimum room temperature of the room temperature alert range The minimum temperature can be set between 52 F 11 C and 69 F 20 C 1 Press MENU when the parent unit is not in use 2 Press W or A to choose TEMPERATURE then press SELECT 3 Press W or A to choose Minimum then press SELECT e If you have more than one baby unit the system prompts you to choose the desired baby unit or all baby units press Vv or Ato choose All CAM or CAM then press SELECT 4 Press W or A to choose the desired temperature then press SELECT to confirm your selection Maximum temperature You can set the desired maximum room temperature of the temperature alert range The maximum temperature can be set between 70 F 21 C and 86 F 30 C 1 Press MENU when the parent unit is not in use 2 Press W or A to choose TEMPERATURE then press SELECT 3 Press W or A to choose Maximum then press SELECT e If you have more than one baby unit the system prompts you to
16. i j a whe a pi parent unit battery is Displays when SPLIT VIEW mode e the baby unit detects sounds while monitor system You can change the brightness of the parent unit your baby sleeps soundly use mode ow ana needs Cnarging in SPLIT VIEW mode screen from Level 1 to Level 5 i cates 2 Press W or A to choose e Press and hold to turn off the parent Off when the parent unit is ee Sensitivit Power on or off the parent unit 1 Press MENU when the parent unit is not in use ne tere TO SOUND ACTIVATED SCREEN unit screen disconnected from AC power uu Sound level indicators aden Parent unit display messages e Press to turn on the parent unit The LINK l l i then press SELECT With this feature you can choose turns on for loud babbling e Di liaht turns on 2 Press W or A to choose BRIGHTNESS then PATROL TALK On when the parent unit is talking to or Displays the sound level according to hear sounds from the baby unit g ress SELECT and louder sounds from 3 Press Y or A to choose On or Off then e Press to t ff the PATROL i to the scales of loudness when i D e Press and hold again to turn off the p l your baby It remains quiet press SELECT to confirm your selection ress to turn on or off the the baby unit all the time or to hear sounds that if i 3 Press W or A to ch the desired level of function there is sound transmitted from exceed a certain level You can No link to The selected baby unit is parent unit The LINK light turns
17. kers Supported by the U S Food and Drug Administration WTR recommends to physicians that Pacemaker patients e Should keep wireless devices at least six inches from the pacemaker e Should NOT place wireless devices directly over the pacemaker such as in a breast pocket when it is turned ON WTR s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices Electromagnetic fields EMF This VTech product complies with all standards regarding electromagnetic fields EMF If handled properly and according to the instructions in this user s manual the product is safe to be used based on scientific evidence available today Temperature alert You can set the parent unit to beep when the temperature is out of the preset temperature range 1 Press MENU when the parent unit is not in use 2 Press W or A to choose TEMPERATURE then press SELECT 3 Press W or A to choose Alert then press SELECT e If you have more than one baby unit the system prompts you to choose the desired baby unit or all baby units press V or Ato choose All CAM or CAM then press SELECT 4 Press W or A to choose On or Off then press SELECT to confirm your selection Temperature format You can choose to display the temperature in Fahrenheit F or Celcius C 1 Press MENU when the parent unit is not in use 2 Press W or A to choose TEMPERATURE then press SELECT
18. me consult your dealer or local power company 14 Do not overload wall outlets or use an extension cord Set alert tone Low battery tone You can set the parent unit to beep when the parent unit operates in low battery condition 1 Press MENU when the parent unit is not in use 2 Press W or A to choose ALERT TONE then press SELECT 3 Press W or amp choose Low Battery Tone then press SELECT 4 Press W or A to choose On or Off then press SELECT to confirm your selection No link alert You can set the parent unit to beeps when the link between the parent unit and the baby unit is lost 1 Press MENU when the parent unit is not in use 2 Press W or A to choose ALERT TONE then press SELECT 3 Press W or A to choose No Link Alert then press SELECT 4 Press W or A to choose On or Off then press SELECT to confirm your selection Sound alert You can turn on the sound alert feature so that while in SPLIT VIEW mode the parent unit beeps and displays Sound detected at CAM whenever the baby unit detects sounds 1 Press MENU when the parent unit is not in use 2 Press W or A to choose ALERT TONE then press SELECT to select 3 Press W or A to choose Sound Alert then press SELECT 4 Press W or A to choose On or Off then press SELECT to confirm your selection 15 Do not place this product on an unstable table shelf stand or other unstable surfaces 16 This product should not be pl
19. on Why is the connection lost every now and then Why are there sound interruptions The baby units may be out of range Move the parent unit closer to the baby units but not less than 3 feet Other electronic products may cause interference with your baby monitor Try installing your baby monitor as far away from these electronic devices as possible Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the Product is fit for ordinary use are limited to one year from the date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall VTech be liable for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the Product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this Product Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Please retain your original sales receipt as proof of purchase Technical specifications Frequency Crystal controlled PLL synthesizer control Transmit Baby unit 2406 2475 MHz frequency Parent unit 2406 2475 MHz Channels 24 LCD 4 3 Color LCD
20. oose the e Press SPLIT key to enter the SPLIT VIEW fs when In mode e the temperature detected by the For baby unit desired baby unit or all baby units press mode i in a menu press to scroll baby unit falls out of the preset i Tieierpermuredciecied Press VOL or VOL on the baby unit at V or A to choose All CAM or CAM AP Patrol mode temperature range Temperature any time then press SELECT e While viewing image press and hold e Displays when the parent unit is in too high at CAM mnie OR EAEADA NY 3 Press W or A to choose the desired to move the image downward PATROL mode Sound activated screen Pete es unit is above the selected sensitivity level then press SELECT to Automatically turns on the parent RD i maximum temperature confirm your selection Night viewing unit screen when a sound is e Displays when the camera has detected in your baby s room When Powering on The parent unit is turning Rare activated the night viewing feature no sound is detected the screen is on You can adjust the baby unit placement to improve the sound detection off to save power In SPLIT VIEW mode e Press A V lt or P to select a baby unit e Press Q or VIEW key to view images from the selected baby unit temporarily in SINGLE CAM mode It returns to SPLIT VIEW mode after 10 seconds e Press PATROL key to display images from different baby units in every 7 seconds e Press SPLIT key again to return to SINGLE CAM mode
21. or the parent unit Use only the supplied rechargeable battery or replacement battery pack BT 198555 BT298555 for the parent unit Do not dispose of batteries in a fire They may explode Dispose of used battery according to the information in The RBRC seal 7 Use only the adapters included with this product Incorrect adapter polarity or voltage can seriously damage the product Baby unit power adapter Input 100 240V AC 50 60 Hz output 6V DC 1A Parent unit power adapter Input 100 240V AC 50 60 Hz output 5V DC 1A For pluggable equipment the socket outlet shall be installed near the equipment and shall be easily accessible 8 The power adapters are intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling under the table or cabinet outlet 9 Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning 10 Unplug the power cords before replacing batteries 11 Do not cut off the power adapters to replace them with other plugs as this causes a hazardous situation 12 Do not allow anything to rest on the power cords Do not install this product where the cords may be walked on or crimped 13 This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply in your ho
22. ound sensitivity is preset to sensitivity Wen your baby makes soft a maximum of four baby units in one screen e While in a menu press to choose an the baby unit and the parent unit al a i Sse a Vibration ena a SPLIT VIEW mode J p Level 3 sounds In SINGLE CAM mode item or save a setting is lost rant tense p y PE E E E ea i o a N For parent unit i Es y Aa wt elie a eu fi number e Press VOL or VOL on the parent unit at 1 Press MENU when the parent unit is not in e Press VIEW repeatedly to view images of A Current view status E A ly any time when viewing images use other baby units e While in a menu press to scroll up e Displays the number of the baby e e while Temperature The temperature detected NOTE 2 Press W or A to choose SENSITIVITY then e Press PATROL to display images from e While viewing image press and hold unit that is being viewed when in toolow atCAM __ from the selected baby P E E E EI E E E T EEE press SELECT different baby units in every 7 seconds Press to move the image upward SINGLE CAM mode e the link between the parent unit represents the unit is below the selected p p i i i ge up Be again to turn off the patrolling function ae l a appears on the screen and the W light turns on If you have more than one baby unit e Displays the highlighted baby unit and the baby unit is lost or selected baby unit minimum temperature WEL app g v hen in SPLIT VIEW mod number l the system prompts you to ch
23. page or 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in the Canada please visit our website at www vtechcanada com or call 1 800 267 7377 NOTE Before calling for service please review the user s manual a check of the Product s controls and features may save you a Service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product s to the service location VTech will return repaired or replaced Product under this limited warranty Transportation delivery or handling charges are prepaid VTech assumes no risk for damage or loss of the Product in transit If the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty What must you return with the Product to get warranty service 1 Return the entire original package and contents including the Product to the VTech service location along with a description of the malf
24. ransmitter must not be co located or operating in conjunction with any other antenna or transmitter This equipment complies also with Industry Canada RSS 102 with respect to Canada s Health Code 6 for Exposure of Humans to RF Fields Frequently asked questions Below are the questions most frequently asked about the baby monitor If you cannot find the answer to your question visit our website at www vtechcanada com or contact 1 800 267 7377 for customer service Why does the baby monitor not respond normally Try the following in the order listed for common sure Disconnect the power to the baby units and the parent unit Remove the batteries in the parent unit Then install the batteries again Wait a few minutes before connecting power back to the baby units and the parent unit Turn on the baby units and the parent unit Wait for the parent unit to synchronize with the baby units Allow up to one minute for this to take place Why don t the power on light of the baby unit and parent unit screen go on when switch on the units Perhaps the parent unit is not connected to the mains Insert the appliance plug into the parent unit and put the adapter in a wall socket Then press O to switch on the parent unit and to establish connection with the baby unit Perhaps the baby unit is not connected to the mains Connect the baby unit to the mains Then set ON OFF switch to ON to switch on th
25. rged baby unit you can choose a higher sound sensitivity e On when the baby unit is turned on 6 Microphone battery is short If you want to monitor your baby for E ae solid m connect it to level and increase the speaker volume of the parent and is paired to the parent unit 7 ly On off a long time we recommend you connect the parent a n AC power unit e Flashes when the baby unit is pairing unit to AC power 7 whoa notin to the parent unit e Press to power on e If the parent unit will not be used for a long time WwW SI NOTE 10 ON OFF switch e Press and hold to power off disconnect and remove the battery to prevent If both units are not connected the parent unit displays Operating range Swite possible leakage No link to CAM represents the selected baby a e Slide to turn on or off the baby unit TALK unit number and Linking on the screen The LINK The operating range of the baby monitor is up to e While viewing image press and hold light first flashes and then turns off Move the parent 300 meters 1 000 feet outdoors or 50 meters 11 VOL asic to the Rees oe Abe unit closer to the baby unit 160 feet indoors The actual operating range e Press to adjust the listening volume walls doors and other obstructions unit when a desired baby unit slot is in or out chosen at the parent unit may vary depending on the environmental 40 PAIR Q Zoom conditions and other interferences such as r ile viewing i E e
26. rts of all persons body are maintained at a distance of approximately 8 in 20 cm or more The transmitter and antenna of the parent unit shall be held at least 1 in 2 5 cm from your face This Class B digital apparatus complies with Canadian requirement CAN ICES 3 B NMB 3 B Night vision The baby unit has infrared LEDs that allow you to see your baby clearly at night or ina dark room When the baby unit detects low light levels the infrared LEDs are switched on automatically S NOTE When the infrared LEDs are on the image is in black and white This is normal due to external light sources KATIP Depending on the surroundings and other interfering factors like lightings objects colors and backgrounds the display resolution may vary Adjust the baby unit s angle or place the baby unit at a higher level to prevent glare and blurry display Add new baby unit VM305 The baby units and parent unit provided are already paired You can add or replace any baby units VM305 purchased separately to your video and audio monitor system You can pair a maximum of four baby units to your parent unit For more details refer to the user s manual that comes with your VM305 new baby unit General product care To keep this product working well and looking good follow these guidelines e Avoid putting it near heating appliances and devices that generate electrical noise for example motors or fluorescent lamps
27. se the parent unit powers on 3 feet You can power up the parent unit by connecting The screen The battery Charge without automatically after connecting to AC power KE 3 Camera it to AC power or to the rechargeable battery displays has very little interruption The screen shows vtech and Powering es 4 Microphone provided Even if the parent unit is connected to Congratulations AC power we recommend you also install the Replace the battery o okan ne oao at Parent may be used 30 minutes battery This guarantees continual operation in To replace the battery press down on the large Unit and for only a S9 NOTE e Antenna A on purchasing your new VTech product Before case of a power outage tab of the battery compartment cover and pull The light short time If you experience audio feedback on either the parent 5 LED lights using this product please read Important it out then follow the steps above to install the unit or baby unit move the parent unit further away 7 Powerjack safety instructions Install the battery as shown below pallet flashes until there is no more audio feedback e Indicate the different statuses of the parent unit For details refer to VTech visit our website at compartment cover and pull it out Notes y aN fully charged the battery If you cannot hear the sounds transmitted from the ON OFF LED light www vtechcanada com N Ope auld Mane o Ueno wie TE na ae F becomes cha
28. sounds Every time you turn on the parent unit you baby unit and the parent unit e m displays solid when the battery You can turn on the temperature e Press and hold VIEW on the parent unit to a certain level You can use the parent unit to re enter the SINGLE CAM mode The screen e T T di i is fully charged alert feature so that the parent e on php gata ep ane turn off the screen P adjust the microphone sensitivity of your baby a E AEREE sae displays image of a particular baby unit in full Press to decrease the speaker il or Is displays when moderate unit beeps whenever the room a Othe needs to be recharged TAS parent unit Speaker If th th baby unit vame or low signal strength is detected e displays when the battery is E e d e e Press any key on the parent unit to turn on unit from Level 1 to Level 5 The higher the turns on for loud crying or screen ere are more than one baby units MUSEET between the baby unit and the low and needs charging baby unit falls out of the desired d the screen again sensitivity level the more sensitive the baby screeching sounds from in your system you can also monitor in the parent unit temperature rande Sound The sound level exceeds unit is in detecting sounds for transmitting to the your baby It remains quiet SPLIT VIEW mode where the screen displays e Press to enter the menu T displays when the link between aioe sande aumt P J detected at CAM e threshold at CAM in Adus eoeakervoume parent unit The s
29. t is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or 2 Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of VTech or 3 Product to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or 4 Product to the extent that the problem is caused by use with non VTech accessories or 5 Product whose warranty quality stickers product serial number plates or electronic serial numbers have been removed altered or rendered illegible or The ON OFF light on the The baby unit is unpaired from the parent unit Make sure both parent unit and baby unit are on before pairing Press MENU when the parent unit is not in use Press W or A to choose PAIR UNPAIR CAM then press SELECT Press W or A to choose Pair CAM then press SELECT Press W or A to choose an empty baby unit slot then press SELECT The parent unit screen displays Press and hold the pair button at the CAM for 5 seconds until the power indicator flashes Immediately press and hold PAIR on the bottom of the baby unit The LED light flashes quickly When pairing is successful
30. ts may be too close to each other Make sure the parent unit and the baby unit at least 1 meter 3 feet away from each other What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period Materially Defective Product During the limited warranty period VTech s authorized service representative will repair or replace at VTech s option without charge a Materially Defective Product If we repair the Product we may use new or refurbished replacement parts If we choose to replace the Product we may replace it with a new or refurbished Product of the same or similar design We will retain defective parts modules or equipment Repair or replacement of the Product at VTech s option is your exclusive remedy VTech will return the repaired or replacement Products to you in working condition You should expect the repair or replacement to take approximately 30 days How long is the limited warranty period The limited warranty period for the Product extends for ONE 1 YEAR from the date of purchase If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty this limited warranty also applies to the repaired or replacement Product for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer Wha
31. turn to pion A eli Real time temperature You can set the parent unit to beep name list l j preoa RELEGI your baby s room As long as no sound is detected within the main menu or idle screen Off when the parent unit is turned off e Displays the real time temperature when Power on or off the baby unit 3 Press Vv or Ato choose English Frangais Laval a Medium high 50 seconds the parent unit screen is off to e While viewing image press and hold or the link to the selected baby unit is of the selected baby unit e the parent unit operates in low Pair unpair Slide ON OFF to the left to turn on the bab or Espanol then press SELECT to confirm sensitivity level save power When your baby starts to cry the to move the image leftward lost battery condition The baby unit and parent unit t The ON OFF LED licht t y your selection The parent unit speaker sound activation triggers the parent unit screen m Mute alert l provided are already paired You can es tales eee turns on for soft babbling automatically turns on VIEW a ate ne a S a e Displays when the speaker volume e the link between the parent unit add or replace baby units VM305 e Slide ON OFF to the right to turn off the Adi briah and louder sounds from your e Press to view the image of the next CAP penis is set to off a a purchased separately to your baby baby unit The ON OFF LED light turns off just screen brightness baby It remains quiet when 1 Press MENU when the parent unit is not in See CAA A
32. unction or difficulty and 2 Include a valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other limitations This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this Product The warranty exclusively describes all of VTech s responsibilities regarding the Product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Provincial Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Why does the parent unit react too quickly to other sounds The baby unit also picks up other sounds than those of your baby Adjust the sensitivity level to a lower level or adjust the speaker volume on the parent unit Why don t hear a sound Why can t hear my baby cry The parent unit speaker volume may be too low or off Press VOL to increase the volume You may have set a low sound sensitivity level See Adjust the sound sensitivity of the baby unit to change the setting Why can t establish a connecti
Download Pdf Manuals
Related Search