Home
        Wizard
         Contents
1.  Do not specify the type of power source manually unless you use unprotected Li lon batteries  1x18650 Li lon battery is by default        Press  amp  Hold Release  amp  Click Click x1  x2 or x3    Ri    ixt8650 Liton  e       2xCR123A  w oe      2xRCR123 Li lon cial    To access the Menu press and hold the switch button  when the flashlight is switched off   It will switch on  go through the all available  modes and then switch off again  After switching off  release the button quickly and click it rapidly again  The flashlight will enter the  Menu and the LED will flash about 3 times a second    Now you can specify the battery type  1 click for 1x18650 Li lon  2 clicks for 2XxCR123A  3 clicks for 2xRCR123 Li lon    After the choice is made the light will flash 1  2 or 3 times to show the battery type chosen    To use the head mount with the flashlight     1  Connect the  small strap  with the  silicone holder        Pass the ends of the big strap through  the loop of the small strap and slots in  the silicone holder  fig b   conjoin  them in a ring  fig c   Pass the loose  end of the big strap through the loop of  the small one in the opposite direction  and fix itin the buckle  fig d               Fix the  flashlight and  adjust the  elastic bands  to the size  of your  head         Click x2 Press  amp  Hold Main The flashlight has 4 Sections of modes               Section1   Firefly modes  Section2   Main modes   ne eg EA ji oie  Section3      Maximum  Section4      Speci
2.  Tactical operation type  unscrew the tailcap to 1 4  press the  button and tighten the tailcap again keeping the button pressed  To return to  the General type  unscrew the tailcap to 1 4 and tighten it again     You have a convenient momentary access to all Modes     ly ly Main  Double click from OFF or ON state turns on the last used Main Mode   it le re Firefly  Press and hold the button in OFF state to turn on the Firefly1  Press  Ase 1sec    Cc    Low Battery Indication High Temperature Indication  Warning Critical Warning j Critical       and hold after Firefly activation to start cycling through the Firefly modes   release the button to select one  Firefly modes can be also accessed from the    ec 05sec 1sec       Des    iors  Main mode by a double click   D gt  Firefly  gt Main3  Sor    rren Maximum  3 clicks from OFF or ON state turn on the Maximum mode     Special modes  Strobe   Beacon   4 clicks from OFF or ON state turn on the last used Special mode  Strobe   Beacon     Cycling through modes  In ON state press and hold the button in any mode  the modes of the current Section will start switching  cyclically  Release the button to select the desired mode  In Maximum mode it starts cycling through the Main modes     Automemorizing  After switching off the last used Mode is memorized for quick 1 click access at next switching on  If the flashlight was  turned on in one of the Special modes it will turn on in the last used Main mode     Lock out function  Unscrew th
3. DH HiT  Jk    With ambient temperature  25  C the flashlight delivers light in Maximum mode for about 8 10 minutes and then the brightness steps  down to the Main3 mode  40 60 seconds afterwards the brightness increases to the Maximum mode again  This stepping goes  cyclically to maintain the user s safety and the flashlight s functionality  In the conditions of good air cooling the flashlight delivers  constant light even in Maximum mode  It does not use timers  but real active temperature measurements     1  Always follow the instructions from this manual and recommendations on battery usage    lt    gt  2  Apply only the recommended power sources    3  Donotreverse battery polarity    4      Do not use different power sources together  i e  old ones with new ones  charged with  discharged  Do not use different types of batteries combined as the element with less    p  capacity can be damaged   5      Do not modify or recast the flashlight and its components as it will deprive you of the          warranty   6  Donotallow water or any other liquid to leak into the flashlight   H O AN 7  Do not aim a turned on flashlight at people s or animals    eyes     it can cause temporary  blindness     8  Donotallow children to use the flashlight without your assistance        J Armytek Optoelectronics Inc  shall not be liable for any harm done to the user if it  was caused by improper use of the product     It is recommended to clean the threads and O rings off dirt and old grease  Re
4. al modes  Main Firefly Main3 In OFF state    Bre Click  To turn on the last used mode  Firefly  Main or Maximum   If the  Click x2 Press  amp  Hold ey flashlight was turned on in one of the Special modes it will turn on in the last  Fret OFF  gt  Firefly used Main mode   rans Firelly    gt  Firefly2 Press and hold  To turn on Firefly1 mode in  Section 1     R e In ON state   Firefly3    Click  To turn off the flashlight   Click x3 Press  amp  Hold Maximum Press and hold  To start cycling through the modes of the current Section  In  OFF Max Main1 Main  Maximum mode it starts cycling through the Main modes in  Section 2    Any mode Max aiia The same in OFF  amp  ON states   2 clicks  To turn on the last used Main mode  Section 2   Further double clicks  Clickx4 Press  amp  Hold Special will switch modes between the last used modes in  Section 1  and  Section 2    3 3 clicks  To turn on the Maximum mode  Section 3    OFF   Special Strobe  Any mode Special av 4 clicks  To turn on the last used Special mode  Section 4    Bi  ka Wizard Pro has 2 types of operation        State Indication Switching State Indication ON OFF 1  General  The flashlight is switched on off permanently     Battery level 1 2 2  Tactical  The light turns on for the time the button is being pressed  It will  Gy Ea ie  at switch on in the last memorized mode  except for the Special modes   This  type of operation is useful for short time lighting and setting signals   Ssec    Press  amp  Hold    To access the
5. e tailcap to 1 4 for the protection from accidental switching on  State Indication will be turned off     Multicolor State Indication  Shows the battery level by short flashes every 5 seconds  State Indication in OFF state and Firefly modes  can be helpful to find the flashlight in the dark    Switching Multicolor State Indication ON OFF  It is switched off by default in OFF state and Firefly modes  To turn on and off  unscrew  the tailcap to 1 4  press the button and holding the button pressed   tighten the tailcap and then unscrew it again  The settings will be  memorized even when battery is changed     Warning Indication  In ON state shows the battery level and the temperature inside the flashlight     Low battery level  When it is  lt 25   the color LED shows the warning level once a second and the main LED flashes 2 times once a  minute  Critical level  lt 5  is color indicated twice a second and light output decreases to Firefly1 and then switched off     High temperature  When it increases to the warning level  the color LED flashes 3 times once a second  At critical level the main LED  flashes 4 times once a minute and the light output decreases to Main3 mode  In case the temperature doesn   t fall the light output  decreases to Firefly2  At normal temperature the brightness increases to usual level           
6. h   Armytek CR123A 1500 sia SOFA Eh  mAh   Armytek 18650 Li Ion 3100 mAh to the Plage bn  decrease to 10  of initial brightness  Max  10501m i 4 h    Strobe  10Hz  Beacon  0 6Hz    Recommended power source 1x18650 Li lon   2xRCR123 Li ion   2xCR123A  Size Length 4 25   108mm  body diameter 0 96     24 5mm  head diameter 1 14     29mm  Weight  without batteries and headband  202   57g      Light outputs for flashlights with Warm light are about 7  less  beam distances are about 3  less     Items included in the package     Flashlight   Magnet    Lanyard   2spare O rings    Clip   Silicone holder    Handband   Headband  2 straps     User manual       Gi v Depending on the model  your flashlight can inconsiderably differ from the pictures in the manual   v The producer reserves the right to change the package at his own discretion without modifying this manual     To set replace batteries     3  1  Unscrew the tailcap   TA   2  Place the batteries with the positive contact     facing the  j head of the flashlight   Q   y 3  Adjust the tailcap and tighten it as far as it can go   The flashlight is ready for operation        The removable magnet in the tailcap      With its help you can easily attach the flashlight to an electric service panel  a bike handlebar   above a car wheel  etc      The magnet can be taken out of the tailcap  To do this unscrew the small cover at the end of the  tailcap and put the magnet out     Specifying the battery type for correct voltage indication  
7. member that secure protection from water and dust  cannot be provided by worn out sealing  And fouling as well as lack of lubricant cause fast wear out of threads and sealing rings     To clean the threads do the following   1  Unscrew the tailcap and remove the sealing ring carefully with a toothpick  do not use sharp metal things as they can damage the ring      2  Wipe the sealing ring thoroughly with a soft cloth  or tissue   Do not use solvents  If the sealing ring is worn out or damaged  replace it by anew one     3  Clean the metal threads with a brush using ethanol  Be careful not to allow applied liquid to get inside the flashlight or tailcap as it  can cause fails in functionality of the flashlight     After cleaning lubricate the thread and the sealing ring with polyalphaolefin based silica grease  e g  Nyogel 760G The application of  automotive and other improper grease can cause swelling and damage of the sealing rings    In case of active operation and exploitation in dusty environments  it is recommended to perform cleaning and lubricating of the parts  as often as required  even if itis more than twice a year     We recommend NOT to leave power sources inside the flashlight for a long storage period  as batteries  especially  non rechargeable  can leak for  various reasons and damage the inner parts of the flashlight  If you want to keep your flashlight in a stand by state with batteries in  use new and  quality batteries  store the flashlight in acceptable fo
8. r batteries operational temperature and revise the batteries  state at least once a month  If you  have noticed any signs of batteries  defects  withdraw them from the flashlight and take out of operation  It is also recommended to replace  discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries     Armytek provides free warranty repair for 10 years from the purchase   Warranty doesn t cover damage caused by   1  Improper usage   2  Attempts to modify or repair the flashlight by nonqualified specialists   3  Longtime application in chlorinated or polluted water  or other liquids  other than water    4  High temperatures and chemicals    exposure  including the exposure of liquid from defected batteries    5  Usage of low quality batteries     Armytek Optoelectronics Inc   Web  www armytek com Email  service armytek com  Address  67 Vandervoort Dr  Richmond Hill  Ontario  L4E 0C7  Canada    Specifications are subject to change without notice     Di E  Jt         THE MOST TECHNICALLY ADVANCED  FLASHLIGHTS IN THE WORLD         USER MANUAL         0  0 gt     gt  WSMtr  gt    tebvr   wYy779Y w        Armytek Optoelectronics Inc  is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your  needs applying in them components made in the USA and Japan  10 years no hassle warranty       Superb light of amazing constant brightness due to powerful electronics and active temperature con
9. trol without timers    Multi flashlight    10 in 1 is for many activities  car  fishing  hunting  home  work  city  picnic  bike  outdoor  travel    Efficient TIR optics and no    tunnel vision    effect even after continuous use     Multicolor Warning Indication of low battery level and high temperature     Side switch for comfortable one hand operation and easy modes switching with advanced operation     Multicolor State Indication and ultra low current drain in OFF state    more than 25 years     Comfortable headband for reliable fixation of the flashlight  it won   t slip even while you re running     Solid body without long wires  weak rubber connectors and unnecessary boxes     Removable magnet in the tailcap  removable clip  strong lanyard and possibility of tail stand for multipurpose use    Compact and light weight flashlight of guaranteed durability stands up harsh impacts and falling from 10 meters    Total protection from water  dirt and dust penetration   flashlight continues to work even at the depth of 10 meters    Model Wizard Pro  LED Cree XM L2  Optics TIR  Brightness stabilization type FULL stabilization  constant brightness   Light output  OTF lumens  1050  Peak beam intensity  candelas 2900  Hotspot spill 70    120    Beam distance  118 yards   108 meters  Hotspot diameter at 16 feet   5 meters 7 meters    Firefly1  0 2Im   100d  Firefly2  2Im   18d     gt  Firefly3  15Im   72h  Modes and runtimes  measured for Sanyo Main1  70m   18h    Eneloop AA 2000 mA
    
Download Pdf Manuals
 
 
    
Related Search
 Wizard  wizard of oz at the sphere  wizard101  wizard of oz  wizardline  wizard  wizard of odds  wizards of the coast  wizarding world  wizard101 login  wizard 5e  wizards of waverly place  wizard101 download  wizard of oz movie  wizard dnd  wizard of barge  wizard of odds craps  wizard of legend  wizard with a gun  wizard of legend 2  wizard ai  wizardry 8  wizard game  wizard spell list  wizardingworld.com  wizard world 
    
Related Contents
owner`s manual manuel du propriétaire manual del propietario  Philips AJ3142 User's Manual  Samsung ED55D Керівництво користувача  advertencia  Use of the MSI Analysis System with the Applied  User`s Manual - HSL Automation Home Page  Samsung 305T Керівництво користувача  取扱説明書  Kenmore 26.5 cu. ft. Side-by-Side Refrigerator - Bisque Energy Guide      Copyright © All rights reserved. 
   Failed to retrieve file