Home

SKF @ptitude Analyst Installation Manual

1. SKF ptitude Analyst Installation Documents the Installation of ptitude Software and User Manuals Supports Microlog Analyzer Microlog Inspector MARLIN W V T WMx IMx and DMx Part No 32296500 EN Revision A Installation Manual Copyright 2013 by SKF USA Inc All rights reserved 5271 Viewridge Court San Diego CA 92123 1841 USA Telephone 858 496 3400 Fax 858 496 3531 Customer Service 1 800 523 7514 SKF USA Inc SKF is a registered trademark of the SKF Group All other trademarks are the property of their respective owners SKF 2013 The contents of this publication are the copyright of the publisher and may not be reproduced even extracts unless prior written permission is granted Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct indirect or consequential arising out of the use of the information contained herein SKF reserves the right to alter any part of this publication without prior notice Patents US 4 768 380 e US 5 679 900 e US 5 845 230 e US 5 854 553 US 5 992 237 e US 6 006 164 US 6 199 422 e US 6 202 491 e US 6 275 781 e US 6 489 884 e US 6 513 386 e US 6 633 822 US 6 789 025 e US 6 792 360 e W0 2003 048714 US 5 633 811 e US 5 870 699 e US 6 437 692 US 7 103 511 e US 7 697 492 Product Support Contact Information Product Support To request a Re
2. iii Costs of Audit If Licensor s audit uncovers a violation of this Agreement by Licensee Licensee shall pay all costs and expenses incurred by Licensor in exercising the i i Licensor Audit Rights including without limitation all attorneys fees and agent fees incurred by Licensor If Licensor concludes that no violation of this License Agreement has occurred Licensor shall bear all costs and expenses incurred in exercising the Licensor Audit Rights If Licensee obstructs restricts or otherwise prevents Licensor from conducting a full and unrestricted audit Licensee shall bear all costs and expenses including attorneys fees incurred by Licensor in enforcing this Section 2 h before any court or judicial tribunal iv Frequency of Audits Licensor s Audit Rights shall be exercised no more than two 2 times in any one calendar year Validity of Intellectual Property Rights In any action dispute controversy or lawsuit arising out of or related to this Agreement Licensee shall not contest the validity of Licensor s Intellectual Property Rights related to the Software Licensee hereby agrees that it has had an opportunity to investigate the validity of Licensor s Intellectual Property Rights and acknowledges that Licensor s Intellectual Property Rights related to the Software are valid and enforceable Material Terms and Conditions Licensee specifically agrees that each of the
3. e Server Port Enter the TCP port used for communication with the Transaction Server Host Make sure your firewall software does not block this port SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Transaction Service Client Select this option if this computer will use a Transaction Server previously installed on another workstation gt This option should not be confused with the database client It is possible for a database client to be a Transaction Server Host and vice versa although it is recommended to make the database host the Transaction server host e Server Name Enter the machine name or IP address of the computer where the Transaction Server is installed e Server Port Enter the TCP Port used for the communication with the Transaction Server host This must match the same port configured on the Transaction Server host Make sure your firewall software does not block this port Stand Alone System If this is a stand alone system i e single user the Transaction Server is not required for client access however it streamlines local database access and some SKF ptitude Analyst features such as DMx integration may require a Transaction Server To accommodate this functionality the Transaction Server host is installed on stand alone systems e Server Name always local host e Server Port Enter the TCP port used for communication with the Transa
4. or local law rule or regulation or use the Software to violate the rights of any third party or use the Software to promote pornography hatred or racism e Copies Licensee solely to enable it to use the Software may make one archival copy of the Software s computer program provided that the copy shall include Licensor s copyright and any other proprietary notices The Software delivered by Licensor to Licensee and the archival copy shall be stored at Licensee s principal business office If you purchased a network license of the Software you may install one additional copy of the Software on your network for the limited purpose of testing the Software s operation Except for the limited reproduction rights set forth in this paragraph Licensee shall have no other right to copy in whole or in part the Software Any copy of the Software made by Licensee is the exclusive property of Licensor f Modifications Licensee agrees that only Licensor shall have the right to alter maintain enhance or otherwise modify the Software g Protection of Software Licensee agrees that it will take action by instruction written agreement or otherwise as appropriate with any person permitted access to the Software to enable Licensee to comply with its obligations hereunder Licensee shall maintain records of the number and location of all copies of Software Licensee shall not provide permit access to or use of
5. ptitude Applications Installation Menu gt The installation menu includes options to install Thin Client Transfer ptitude Decision Support and DMx Manager gt ptitude Decision Support installation is detailed in the SAF ptitude Decision Support Installation manual which accompanies the product gt Thin Client Transfer installation is detailed in the nstalling SKF ptitude Analyst Thin Client Transfer section later in this manual gt DMx Manager installation is detailed in the SKF ptitude Analyst DMx Manager Installation manual SKF ptitude Analyst 1 21 Installation Manual Installation Installing the SKF ptitude Analyst Applications Installing SKF ptitude Analyst ptitude Inspector SKF offers the option to purchase a version of SKF ptitude Analyst that supports a specific data acquisition device i e SKF ptitude Analyst for SKF Microlog Analyzer SKF ptitude Analyst for SKF Multilog On Line Systems TMU SKF ptitude Inspector for MARLIN and Microlog Inspector or to purchase the full SKF ptitude Analyst product which supports all Analyst data acquisition devices All of these products as well as the HMI Trend Oil Work Notifications IT Security and NT Authentication add on applications are installed using the same installation procedure The product that is enabled during installation is determined by the license key you enter Refer to Appendix A SKF ptitude Analyst License Key Manager for de
6. somename gmail com S SKF ptitude Analyst Configuration Tool User name General Configuration User password ae al AA Reguires authentication Use secure connection SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer Save __Helo 0 SKF ptitude Analyst License Key Manager SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Figure 30 The SMTP Settings Dialog This dialog allows you to configure the e mail notification system Name Enter the name of the SMTP server Server address Enter the address of your outgoing SMTP mail server Port Enter the SMTP port used by your mail client From Enter the email address you wish for SKF ptitude Analyst to use to send an email User name Enter the user name used to connect to the SMTP server User password Enter the password associated with the selected user name Requires authentication When enabled you are required to log on to the SMTP server SKF ptitude Analyst 2 29 Installation Manual SKF ptitude Analyst Configuration Tool SMTP Settings User secure connection When enabled the Secure Sockets Layer SSL security protocol is used when connecting to the SMTP server When finished press the Save button to save the SMTP configuration e Click the Test button to verify that the specified SMTP settings are valid If successful the Email List dialog displays allowing you to ente
7. 2 13 General Configuration cccccccccsccsesescseseeteeesees 2 13 SKF ptitude HMI Connection 2 14 SKF ptitude Transaction Service 2 15 SKF ptitude Monitor RECOVETY cceseseseees 2 17 SKF ptitude Thin Client Transfer 2 18 SKF ptitude Analyst License Key Manager 2 19 SKF ptitude IMx Service 2 20 SKF ptitude Microlog Service 2 23 SKF ptitude WMX Service 2 26 SMTP Sete nonan hennad 2 29 Installing SKF ptitude Analyst Thin Client Transfer 3 SKF ptitude Analyst Installation Manual TOC 1 Installation Maintenance 4 Removing your Installation 4 1 SKF ptitude Analyst License Key Manager A OVEN EW E r ari AAAA A 1 SKF ptitude Analyst System Connection Diagram B TOC 2 SKF ptitude Analyst Installation Manual 1 Installation Important How to Facilitate a Quick Easy Product Installation The information in this section is provided to point you in the right direction to help guarantee the easiest possible installation Varying Procedures for First Time Installations Application Upgrades and Product Maintenance Releases Note that there are various types of software installations for example first time installations vs product upgrades vs product maintenance releases 7he SKF ptitude Analyst Installation and Upgrade Matrix below overviews specific installation steps you will take depending on your situati
8. H Installing SKF ptitude Analyst Thin Client Transfer SMTP Settings fields If this Thin Client Transfer installation will only be used to communicate with the Microlog or MARLIN at a remote location via file transfer CMSW7320 and does not require a connection to the SKF ptitude Analyst database unmark this check box and click Next Name Enter the machine name or IP address of the computer where the Transaction Server is installed Port Enter the TCP Port used for communication with the Transaction Server host This must match the same port configured on the Transaction Server host gt Make sure to allow this port by your firewall software installed on the host computer e Click Next The Ready to Install the Program page displays e Click Install to begin the installation The Installing Thin Client Transfer page displays progress When the installation is complete the Stop and Read page displays This page provides important information concerning licensing your SKF ptitude Thin Client Transfer installation e Read the information on the page and click Next gt For more information on licensing refer to the A Note About Thin Client Transfer Licenses heading earlier in this section InstallShield Wizard Complete page displays This page provides an option to Show the readme file The Readme file contains important information related to your installation It is recommended that you leave this option button select
9. These pdf version user manuals are automatically installed with the software and may be accessed from the Windows Start menu Prior to installation manuals may be viewed from the installation DVD by selecting the View Installation Manuals or View User Manuals links on the installation menu Note that the Adobe Reader version 7 0 or newer is required and must be installed to view and print the pdf version manuals Download Adobe Reader from the Adobe website A Note about License Keys License keys are found on the License Key letter inside the CD case License keys are used to enable the product s you have purchased During installation you ll be asked to enter your keys Make sure you have them on hand before starting the installation SKF ptitude Analyst Installation Manual Installation Hardware Requirements What to Install First Use the following check list when installing SKF ptitude Analyst and any add on applications a a a Locate the SKF ptitude Analyst installation DVD Ensure you have your license keys available Review the Planning the nstallation section of this manual for important pre installation instructions and guidelines During this step you will be requested to install important prerequisite programs and a supported database manager You will need to restart your computer before continuing with the installation Install SKF ptitude Analyst entering the appropriate license keys during
10. Welcome page appears e Click Next to continue to the License Agreement page e Carefully read the license agreement If you do not agree with the terms of the license agreement click Cancel to abort the installation If you agree with the terms select accept the terms of the license agreement and click Next to proceed to the Choose Destination Location page gt If SKF ptitude Analyst is already installed on this computer the previously selected destination location is automatically used and this page does not appear The default destination location displays e Accept the default location recommended or use the Browse button to select a new location and click the Next command button The Transaction Server Name page displays You must specify whether this computer requires a connection to the transaction server and if so the Transaction Server to use with this Thin Client Transfer installation This computer will connect to the Transaction Server Communication between SKF ptitude Analyst and SKF ptitude Thin Client Transfer is handled through the Transaction Server If this Thin Client Transfer installation will be used to communicate with an SKF ptitude Analyst database i e upload to and download from the Analyst hierarchy you must specify the Transaction Server to use Leave this check box enabled and enter the Transaction Server information in the following 3 2 SKF ptitude Analyst Installation Manual G
11. With it you can add and remove license keys either one at the time or by importing an entire block of license keys from a file Through the LKM one can quickly get an overview of the active license keys and the entitlements for which they allow Q How is the application s serial number used A Every purchase of SKF ptitude Analyst is assigned a serial number If a purchase involves a multi client license all individual installations within that multi client license have the same serial number The serial number allows SKF to properly manage your service and upgrade entitlements such as Product Support Plans and maintenance releases End users can view their application s serial number using the LKM Add Ons that are enabled as part of a purchase acquire the same serial number as the core application Customers may purchase more than one core application or purchase different core applications each with its own serial number For example SKF ptitude Analyst for SKF Microlog Analyzer only may be purchased for two different plants Both will have their own individual serial number Alternatively a single site may have purchased SKF ptitude Analyst 10 multi client licenses and SKF ptitude Inspector 5 multi client licenses Again each will have a separate serial number and will be placed in separate alf files SKF ptitude Analyst Installation Manual SKF ptitude Analyst License Key Manager Overview Q How does the
12. a product license key which enables SKF ptitude Analyst for these five application clients Upon SKF ptitude Analyst Installation Manual SKF ptitude Analyst License Key Manager Overview receipt of the new product license key you should remove the current license key and add the new license key with the upgraded number of users Q Where is the reference to the product license key file A To make sure that all appropriate ptitude applications operate on and can refer to the same license key file the path to this license key file is stored in the client PC s LicenseMngr exe config file Q How do share the product license key file with two or more users A Follow these steps 1 Ensure that all applicable users have read access to a common drive 2 Start LKM on one of the client PCs that is appropriately licensed 3 Select File Save As to store the product license key file on the common drive in a location accessible by all other client PCs 4 For each subsequent client PC start the LKM and select File Use File to select the product license key file created in step 3 As an alternative to step 4 you may also modify the registry to have the LicenseFile entry point to the commonly located file directly Note that this works only if all client PCs access the common network drive by the exact same path including drive letter How do limit end user access to the product license key file to minimiz
13. connection alphanumeric and underscore characters only Db connect name Input the database connection name of the specific SKF ptitude Analyst database Database type Use option buttons to specify the SKF ptitude Analyst database as either an Oracle or SQL Server database type If you installed the Oracle 11g XE database the connection name is XE If you are connecting to an existing database enter the appropriate connection name If you installed the MS SQL Server 2008 Express database enter computer_name SQLExpress where computer nameis the name of the computer on which the instance is installed If you are connecting to an existing database enter the appropriate instance name gt In some circumstances you will not need the instance name Contact your database administrator or IT department for assistance When finished press the Save button to save the new database connection or the Undo button to cancel gt After pressing Save the Db Connection Test dialog appears allowing you to test the database connection Edit Edit an existing database connection s configuration Select the database connection to edit from the Connections drop down list and press the Edit button then edit the connection s configuration as described above When finished press the Save button to save any changes or the Undo button to cancel any changes Remove Remove an existing database connection available only for dat
14. connection to the database and you wish to automatically receive an email notification about the loss of connection enable the Send emails when service loses database connection check box Click the Email list button to enter email addresses to which the WMx Service will send notifications SKF ptitude Analyst 2 27 Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude WMx Service Type in the email accounts of the recipient OK Cancel Help Figure 29 The Email List Dialog gt Each email address must be separated by either a comma or semicolon gt Before the email recipients can receive these notifications you must first configure the SMTP settings Reference the SMTP Settings section later in this chapter e When finished press the Save button to save the new WMx Service configuration the new WMx Service appears in the table and the new WMx Service initiates or press the Undo button to cancel the changes To edit an existing WMx Service e Select the WMx Service to edit from the table and press the Edit button then edit the WMx Service properties as described above When finished press the Save button to save any changes confirmation prompts appear or the Undo button to cancel any changes To deactivate activate an existing WMx Service At times you may wish to deactivate an WMx Service stop communication between the WMx devices and its database then reactivate it at a la
15. or otherwise make available any Software in any form without Licensor s prior written agreement except to Licensee s employees for purposes specifically authorized by this Agreement Licensee understands and agrees that the source code for the Software is a h valuable copyright and contains valuable trade secrets of Licensor Licensee agrees not to discover or attempt to discover or assist or permit any Person to discover or attempt to discover by any means whatsoever the source code of the Software Licensor s Audit Rights Licensor shall possess the right to audit Licensee s use of the Software to determine compliance with this Agreement hereinafter referred to as Licensor s Audit Rights Licensor s Audit Rights shall be exercised in accordance with the following paragraphs i Notice of Audit Licensor shall provide Licensee with at least five 5 calendar days advance written notice of its intent to exercise the Licensor s Audit Rights ii Conduct of Audit The audit conducted by Licensor shall consist of a physical review of the computer hardware software and middleware operated by Licensee at its principal business office and any other office for which Licensor in its sole and arbitrary discretion deems an audit appropriate Licensee shall provide Licensor with unrestricted access to its computer hardware software and middleware in connection with any audit conducted by Licensor
16. or the Undo button to cancel any changes SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Microlog Service To deactivate activate an existing Microlog Service At times you may wish to deactivate a Microlog Service stop communication between the Microlog devices and its database then reactivate it at a later time This operation is needed if you decide to move the Microlog Service to another computer In the table select the Microlog Service to deactivate and press the Deactivate button The selected Microlog Service is deactivated but not removed from the Microlog Services table gt Any Microlog Inspector devices that were configured to communicate with this Microlog Service will no longer have their data saved in the SKF ptitude Analyst database The deactivated Microlog Service still appears in the table but when selected the Deactivate button changes to an Activate button indicating the Microlog Service is not currently operating Press the Activate button to resume the Microlog Service s communication operations To remove a Microlog Service In the table select the Microlog Service to remove and press the Remove button The selected Microlog Service is deactivated and removed from the Microlog Services table gt Any Microlog Inspector devices that were configured to communicate with this Microlog Service will no longer have their data saved in the SKF pti
17. product s you have purchased This Installation manual documents the installation procedure for the SKF ptitude Analyst DVD which installs SKF s SKF ptitude Analyst software that supports SKF s Microlog Analyzer Microlog Inspector MARLIN IMx TMU CMU LMU MIM WMx IMx and DMx data acquisition devices During the installation license keys are used to activate portions of the application specific to your purchase In addition to SKF ptitude Analyst end users may obtain license keys for one or more add on applications which extend the features of SKF ptitude Analyst The following add on applications are automatically installed during the SKF ptitude Analyst installation procedure and activated based on license keys e HMI SKF ptitude Analyst Human Machine Interface e Trend Oil e Work Notifications e IT Security e NT Authentication Additional applications are available as separate installs that can be run once the SKF ptitude Analyst installation procedure is complete These include e SKF ptitude Decision Support e SKF ptitude Analyst Thin Client Transfer e DMx Manager The SKF ptitude Analyst installation DVD provides a menu with links that install Thin Client Transfer ptitude Decision Support and DMx Manager Refer to the What to Install First heading later in this section for help with the installation order A Note about User Manuals Product user manuals are provided as Adobe Acrobat pdf files
18. readme file automatically upon clicking Finish leave the View the Readme file check box enabled SKF ptitude Analyst 1 25 Installation Manual Installation What s the Next Step Launch the Analyst Configuration Tool check box The ptitude Analyst Configuration Tool allows you to configure a new ptitude Analyst database or update an existing ptitude Analyst database Reference Chapter 2 SKF ptitude Analyst Configuration Tool for more information e f you wish to launch the Configuration Tool automatically upon clicking Finish enable the Launch the Analyst Configuration Tool check box e Click Finish to close the wizard and return to the main installation menu Q e Click the back arrow twice to return to the Select Language menu f e Click exit to close the menu If you selected to read the readme file a window opens where you can read and or print the installation notes If you selected to launch the Configuration Tool the SKF ptitude Analyst Configuration Tool window displays gt After installation is complete you must first launch the SKF ptitude Analyst Configuration tool and configure or update your ptitude Analyst database before launching the SKF ptitude Analyst application Refer to the section below What s the next step for details gt Refer to the SKF ptitude Analyst Introduction and Global Features user manuals Starting SKF ptitude Analyst section for instructions and initial login d
19. screen displays 2 SQL Server 2008 SKF ntitud Oracle 11g Express putude Monitoring suite Install SQL Server 2008 Express Figure 3 The Database Manager Page Both of the ptitude Analyst database manager installation options are described in their own section below gt The following database manager installation procedures apply only to standard first time installations Non standard installations and product upgrades may or may not use existing databases Reference the SKF ptitude Analyst Installation and Upgrade Matrix at the beginning of this chapter for more information SKF ptitude Analyst Installation Manual Installation Database Installation ptitude Analyst s DVD SQL Server 2008 Installation To install the SQL Server 2008 database manager For your convenience this SQL Server 2008 installation has been pre populated with standard settings for use with SKF ptitude Analyst Therefore for standard installations you should not change any of the pre populated settings in the installation dialogs You should simply press OK Next or Install as applicable for each dialog as you progress through the installation The installation dialog progression is listed below of course this does not apply for those wishing to customize their database installation Setup Support Rules press OK Product Key Next License Terms Next Support Setup Files Install Setup Support Rule
20. tatu typa E SKF ptitude Transaction Service Paes Sal SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager Help SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Status Figure 21 The SKF ptitude Monitor Recovery Service Configuration Dialog gt SKF ptitude Monitor Recovery must be configured on every computer on which you are running the SKF ptitude Analyst Monitor application SKF ptitude Monitor Recovery is a service that runs in the background to facilitate recovery re launch of the SKF ptitude Analyst Monitor application in the event of a SKF Analyst Monitor failure To activate deactivate SKF ptitude Monitor Recovery on a computer running SKF ptitude Analyst Monitor e In the dialog s Status area information is provided as to the recovery service s current state and buttons are provided that allow you to manually start and stop the recovery service If the Service Status indicates the service is not running press the Start button to start the recovery service Then use the Start Mode Action options to specify how you wish the recovery service to perform after the computer has restarted e Inthe Start Mode Action area use the Startup Type drop down list to specify how you would like the recovery service to start when the computer res
21. the installation process gt The installation documentation is provided as both a printable pdf file and a help file The help file provides the advantage of hyperlinks that make it easier for you to progress down a specific installation path For this reason you should consider using the online help during the installation process However the help file only provides details for the individual installation scripts and not for the autorun steps i e pre requisites therefore we also recommended that you print the pdf file Refer to the Whats the Next Step section following SKF ptitude Analyst installation to determine how you should proceed Please take a moment to register your product at www skf com cm register to receive exclusive benefits offered only to our registered customers including receiving technical support tracking your proof of ownership and staying informed about upgrades and special offers Please visit our website for more details on these benefits Print and read the appropriate SKF ptitude Analyst User Manuals for instructions on getting started All user manuals are available from the SKF ptitude Monitoring Suite Manuals option on the Windows Start menu after the installation is complete Hardware Requirements For maximum SKF ptitude Analyst performance click the link below to open the SKF ptitude Analyst datasheet and reference the Hardware Requirements section for detailed hardware configurati
22. this Agreement and that monetary damages in such event would be substantial and inadequate to compensate Licensor Consequently Licensor shall be entitled to seek and obtain in addition to such other monetary relief as may be recoverable at law or in equity such injunctive other equitable relief as may be necessary to restrain any threatened continuing or further breach by Licensee without showing or proving actual damages sustained by Licensor and without posting a bond CM F0176 Revision F January 2011 Table of Contents Installation 1 Important How to Facilitate a Quick Easy Product Installation eisenos 1 1 Hardware Reguirements emmre 1 3 Technical SUppr teenin ain ia 1 4 Planning the Installation imememe 1 4 Upgrading an Existing Version of the Software 1 10 Initiating the Installation Process 1 14 Installing Prerequisite Applications 1 15 Database Installation ccccesesesessssecesesssesteseees 1 17 Installing the SKF ptitude Analyst 7ANG 8 er 1d 0 re 1 20 What s the Next Step oc ceccccccscsesseseeeteeeees 1 26 SKF ptitude Analyst Configuration Tool 2 Database Configuration Options 2 1 Database Type iii fisetit ied kets aa aa 2 2 Change Database sciss scese kvark laka 2 9 WpdateMatahbaser alea ets 2 11 Rui SQL Seriptisss tas a 2 12 SKF ptitude Analyst Configuration Tool
23. type and location information Enter appropriate information and press OK The script output file is saved and you are returned to the Run SQL script dialog SKF ptitude Analyst Configuration Tool If necessary use SKF ptitude Analyst Configuration Tool options to configure other applications working with SKF ptitude Analyst General Configuration This option allows you to modify the settings for SKF ptitude Analyst applications gt We do not recommended modifying these settings without the guidance of SKF service personnel or technical support Figure 18 r Maj SKF ptitude Analyst Configuration Tool Ge File Help E Database SKF ptitude Analyst Master Settings Database Type E SKFMachineAnalyst Change Database H Analyst User Management A AppDevelopment Update Database G Application Settings Run SQL Script E Archive Settings B SKF ptitude Analyst Configuration Tool 4 CommunicationPreferences eneral Configuratior 4 DMxSettings SKF ptitude HMI Connection 6 Database E SKF ptitude Transaction Service G ErrorLog 7 SKF ptitude Monitor Recovery H EventLog SKF ptitude Analyst Thin Client Transfer H MonitorSettings SKF ptitude Analyst License Key Manager G OilAnalysis SKF ptitude Home H Online Settings SKF ptitude IMx Service W Installation Settings SKF ptitude Microlog Service E Print Settings SKF pttude WMx Service E RpcClientSettings a SMTP Se
24. Files SKF Transaction Server Applications SKF ptitude Analyst SKF ptitude Monitor SKF ptitude Analyst Inspector Foundation C Program Files SKF AS Program Folder C Program Files SKF RS SKF ptitude Analyst gt lt Back Figure 7 The Start Copying Files Page The Start Copying Files screen displays a summary of the settings to be used to install SKF ptitude Analyst e Review these settings carefully If the settings are acceptable click the Next command button to begin installing SKF ptitude Analyst If the settings require editing click the Back button to return to the previous screen s The installation program proceeds to create the specified installation directory on the specified drive and additional subdirectories branching from the specified directory Program files are then copied into their appropriate directories The Setup Status page displays progress Depending on your installation selections additional command windows may appear as settings are configured When the installation is complete the InstallShield Wizard Complete page displays The InstallShield Wizard Complete Page The InstallShield Wizard Complete page allows you to view the Readme file and launch the SKF ptitude Analyst Configuration Tool when you click Finish View the Readme file check box The Readme file contains important information related to your installation e f you wish to open the
25. LED OF ITS ESSENTIAL PURPOSE OR FAILED IN SOME OTHER RESPECT b Acknowledgment Licensee agrees that the limitations of liability and disclaimers of warranty set forth in this Agreement will apply regardless of whether Licensor has tendered delivery of the Software or Licensee has accepted the Software Licensee acknowledges that Licensor has set its prices and entered into this Agreement in reliance on the disclaimers of warranty and the limitations and exclusions of liability set forth in this Agreement and that the same form an essential basis of the bargain between the Parties 9 10 11 TERM AND TERMINATION a Term This Agreement shall commence on the Effective Date and shall continue in existence until it is terminated in accordance with Section 9 b below b Termination Licensor may terminate this Agreement and the license conveyed hereunder in the event that Licensee breaches any provision term condition or limitation set forth in this Agreement including but not limited to the license restrictions set forth in Section 2 d of this Agreement c Effect of Termination Within ten 10 days after termination of this Agreement and the license granted hereunder Licensee shall return to Licensor at Licensee s expense the Software and all copies thereof and deliver to Licensor a certification in writing signed by an officer of Licensee that all copies of the Software have been returned to Lic
26. MI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service M User Management New user name Existing users Delete User Refresh Help SKF ptitude WMx Service SMTP Settings Figure 15 The User Management Dialog The User Management dialog allows you to easily Create new SKF ptitude Analyst database users or Delete existing database users Creating New Database Users To create new database users In the New User Name field type the name of the new user and press the Create User button You are prompted for your password enter your password and press OK You are prompted to wait while the new user is created Success is indicated in the dialog s lower right and in a Success dialog In the Success dialog press OK to complete Press the Refresh button to add the new user to the Existing Users list You are prompted for your password enter your password and press OK Success is indicated in the dialog s lower right and in a Success dialog Deleting Database Users To delete an existing database user In the Existing Users list highlight the user to delete Press the Delete User button You are prompted for your password enter your password and press OK You are prompted to wait while the user is deleted Suc
27. Only Oracle 32 bit is supported when the SKF ptitude Analyst software and its utilities are installed on the same computer Windows Operating System Compatibility Windows Vista Issues Windows Vista is no longer supported by any SKF software Windows 7 User Account Control UAC and Windows 7 64 bit Compatibility Some SKF ptitude Analyst applications and add ons and some SKF data acquisition devices DADs that communicate with ptitude Analyst have Windows 7 UAC restrictions and or Windows 7 64 bit restrictions The following two tables specify these restrictions Note Core Modules SKF ptitude Inspector CMSW 7200 SKF ptitude Analyst for Microlog Analyzer CMSW 7300 and SKF ptitude Analyst CMSW 7400 Note Add Ons Trend Oil CMSW 7308 and Work Notification CMSW 7302 Note UAC level must be set to low Note Support planned for future release Note If you are using Oracle for your database then Oracle 32 bit or Oracle 32 bit Client is required when installing these utilities on the same server or client PC Note Download the 64 bit driver from the SKF Microlog Analyzer series download page The drivers are also available in the SKF ptitude Analyst installation DVD in the Tools AX folder SKF ptitude Analyst 1 7 Installation Manual Installation Planning the Installation Application Utility Win 7 32 bit SKF ptitude Analyst 2012 Core modules and Add ons n
28. SKF ptitude Analyst installation DVD will not install on computers running Windows 7 operating system Important Oracle 11g Express offers up to 11 GB of database storage capacity and a limit of one named instance and SQL Server 2008 Express offers up to 10 GB of database storage capacity and a limit of one named instance If you require more storage capacity or more than one named instance you must upgrade to a production version of the database from Oracle or Microsoft Your Database Administrator needs to install the database prior to running the SKF ptitude Analyst installation Only Oracle 32 bit is supported when the SKF ptitude Analyst software and its utilities are installed on the same computer Important When installing the Microsoft SQL Server 2008 database manager make sure you configure a Mixed Mode authentication SKF ptitude Analyst Installation Manual Installation Planning the Installation Network Considerations There are two possible installation scenarios e Multi user Installation Provides multi user capability The database is installed on a server computer The applications that interact with the data are installed on additional client computers and access data over the network e Single user installation Installs both the database and the applications on a single computer All data access is performed locally If you are performing a single user installation you need only ensure the co
29. User License Agreement d THIS END USER LICENSE AGREEMENT this Agreement is entered into by and between SKF USA Inc and or SKF Condition Monitoring Center AB hereinafter referred to collectively as the Licensor and any person or business that executes this Agreement by clicking the I agree icon at the end of this Agreement or by accessing using or installing the Software Licensee or You Licensor and Licensee e shall be referred to collectively in this Agreement as the Parties BY CLICKING THE ACCEPTANCE BUTTON OR ACCESSING USING OR INSTALLING THE SOFTWARE OR ANY PART THEREOF YOU EXPRESSLY AGREE TO BE BOUND BY ALL OF THE TERMS OF THIS AGREEMENT IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT THE BUTTON INDICATING NON ACCEPTANCE MUST BE SELECTED AND YOU MAY NOT ACCESS USE OR INSTALL ANY PART OF THE SOFTWARE 1 DEFINITIONS a Derivative Works The Term Derivative Works shall have the same meaning as set forth in the U S Copyright Act as amended from time to time in title 17 of the United States Code b Effective Date The term Effective Date shall mean the date on which Licensee assents to the terms of this Agreement by clicking the agree button at the bottom of this Agreement c Intellectual Property Rights The term Intellectual Property Rights shall mean all rights arising or protectable under the copyright trademark patent or trade
30. a new location and enter a name for the file e Click Save to save the license key file to the specified location gt This feature can also be used to save the configured license keys to a file to facilitate installation on other computers A 6 SKF ptitude Analyst Installation Manual Appendix B SKF ptitude Analyst System Connection Diagram SKF ptitude Analyst 2012 Edition system Connection Diagram ce of os Microlog i 1 EE Microlog Analyzer MARLIN a al Inspector Mi CMU IMx jele WMx WV T m uso USB 802 118 TCP IP WMx Microlog Service Service RS485 TCP IP TCP IP SKF ptitude TCT Remote Client File SKF Optitude TCT Remote Client Direct SKF ptitude Analyst SKF ptitude IMx Monitor Service HMI Connection Service oH SKF ptitude HMI SKF ptitude Analyst Database 2 ptitude SKF ptitude Decision Support Client SKF ptitude Decision Support Server SKF ptitude Decision Support Online Decision Support Database SKF ptitude Analyst Installation Manual Index B backup 1 22 C client Transaction Server 2 16 D database change 2 9 configuration 2 1 connect name 2 6 connection information 1 4 1 17 considerations 1 4 1 17 demo 2 1 run SOL script 2 12 save 2 8 specifying database tool 2 2 supported 1 4 1 17 type 2 5 update 2 11 user managemen
31. abase connections not being used by any IMx Microlog Service Select the database connection to remove from the Connections drop down list and press the Remove button You are prompted to confirm the removal Close Close the Manage Connections dialog To continue configuring the database type specify database type information on the Database Type dialog as follows Oracle 10g 10g XE and 11g Select this option if you have configured an Oracle database on your database server computer MSSQL 2005 2008 Express Edition Standard Edition Select this option if you have configured a Microsoft SQL database on your host computer Oracle Database Passwords SYS Password If you installed a new database enter the password that was entered at the Specify Database Passwords page during the Oracle installation process If you are connecting to an existing database enter the appropriate SYS password SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool Database Type OR SYSTEM Password If you selected to install a new database enter the password that was entered at the Specify Database Passwords page during the Oracle installation process If you are connecting to an existing database enter the appropriate SYSTEM password OR Custom User Name and Password To connect as a specific user enter your user name and password Microsoft SQL Server 2008 Database Password SA P
32. alled If no installed database software application from Oracle or Microsoft is detected the Software will not install until such time as Licensee installs a valid and Software compatible copy of an Oracle database or a Microsoft SQL Server database and consents to the license terms of such database software application If Licensee does not agree to the terms of the Oracle database license or the Microsoft d SQL Server license or if the Licensee fails to install such database software the Software will not work Licensee is responsible for maintaining a valid database license in accordance with the Oracle or Microsoft license agreement which ever is applicable at all times Restrictions on Use Licensee may use the Software only for its internal business purposes and on the identified equipment on which the Software was first installed or for which it is otherwise licensed provided however that Licensee may temporarily use the Software on a back up system in the event that the primary licensed system is inoperative or test system not used for production but solely for the purposes of testing the Software Licensee may not use the Software for any other purpose Licensee shall not i permit any parent subsidiaries affiliated entities or third parties to use the Software ii use the Software in the operation of a service bureau iii allow access to the Software through any workstations located outs
33. alyst Reference the installation instructions either in this manual or in the product s documentation to complete their installation Run the database configuration if A database administrator configures a new database after SKF ptitude Analyst has been installed A user has multiple database instances for example a service engineer Upgrading an existing database SKF ptitude Analyst Installation Manual 2 SKF ptitude Analyst Configuration Tool Database Configuration Options After completing installation of your SKF ptitude Analyst application s your next step is to configure your database to work with SKF ptitude Analyst e From the Windows Start SKF ptitude Monitoring Suite Admin Tools menu select the SKF ptitude Analyst Configuration Tool option A warning message displays advising caution then Configuration Tool help automatically displays and you are prompted whether to show help on startup again answer appropriately then the SKF ptitude Analyst Configuration Tool dialog displays If you are a new user you must first acquire the demo database file s then configure your database by first selecting your database type on the Database Type dialog and then either Attach to an SQL database or Import an Oracle database s dmp file using the Change Database dialog If you are an existing user you must update your database on the Update Database page File Help Data
34. aragraphs govern your installation and use rights with regard to the Software depending on the type of license you have obtained from Licensor i If you obtained a stand alone license of the Software you may install one 1 copy of the Software on one 1 computer residing in your principal business office ii If you obtained a network license of the Software you may install one 1 copy of the Software on as many networked clients workstations as authorized by your network license as set forth more particularly in the applicable purchase order or other ordering documents memorializing your license acguisition provided however that all network clients workstations are connected to a single licensed database residing in your principal business office iii If you obtained a network license of the Software you may connect to multiple licensed databases you may install the database dedicated clients up to the total number of networked clients acguired by you under the applicable purchase order or other ordering documents memorializing your license acquisition Other Conditions of Use Licensor understands and agrees that the Software works in conjunction and is compatible with database software licensed to you by Microsoft or Oracle Upon installation of the Software the Software may detect an installed database software application from Oracle or Microsoft and if so the Software will be fully inst
35. assword If you installed a new database enter the password that was entered in the Specify the sa logon password field on the Authentication Mode page of the SQL Server 2008 Express installation wizard If you are connecting to an existing database enter the appropriate SA Password OR Custom User Name and Password To connect as a specific user enter your user name and password e Enter your password and press OK Database connection is tested and resulting success is indicated in the dialog s lower right and in a Success dialog e Inthe Success dialog press OK to complete Database Type configuration gt If you use Database Type options to change to a different type of database use the Save button to save the new database type settings SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool Change Database Change Database wa SKF ptitude Analyst Configuration Tool Database Import Attach Configuration mi BI x File Help Change Database E Database Database Type Change SKF ptitude Analyst database Change Database User Management Detach Attach Switch Help Update Database Run SQL Script E SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF pt
36. base Type Change Database User Management Update Database Run SQL Script El SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Figure 8 The SKF ptitude Analyst Configuration Tool Main Window SKF ptitude Analyst 2 1 Installation Manual SKF ptitude Analyst Configuration Tool Database Type The window s left pane displays two main configuration options Database configuration options provide options for specifying a database type changing to a different database adding users for existing databases updating the database and running an SQL script SKF ptitude Analyst Configuration Tool options allow you to configure various supporting SKF ptitude Analyst applications You first use the Database options to configure your database then you proceed to use the lower section to configure other installed applications Specify the Database Configuration Tool Before applying database configuration options you may need to use the File menu s Setting option to specify which database tool to use to execute all database relevant functions i e Run SQL script etc if the database tool is not found in the d
37. build loginname username links sal typically located in the dbassist scripts sgl server installation folder gt Reference the Aun SQL Script section in Chapter 2 SKF ptitude Analyst Configuration Toolfor details on running SQL scripts e When prompted for an SQL Server Password select the Use SA user option and enter your SA Password Initiating the Installation Process Reference the SKF ptitude Analyst Installation Upgrade Matrix at the beginning of this chapter Depending on your type of installation you may or may not be required to e Uninstall the currently installed version of the application e Run Prerequisite applications e Install the Database Manager e Install the SKF ptitude Applications e Configure the installed database e Update the database Options for performing these installation steps are provided in this installation s Install Applications or View Manuals menu see next figure Important If you are upgrading from a prior version create a full backup of your database before proceeding Refer to the previous Upgrading an Existing Machine Suite Installation section for details To initiate the installation process e Verify that your computer meets the minimum system requirements then insert the Application DVD into your DVD drive The install program automatically launches gt Ifa previous version of the software is already installed you must first uninstall the previous version u
38. cess is indicated in the dialog s lower right and in a Success dialog The user is disabled from using the database SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool Update Database gE SKF ptitude Analyst Configuration Tool Database Yersion Configuration A iol x Eile E Database Press the Refresh button to delete the user from the Existing Users list You are prompted for your password enter your password and press OK Success is indicated in the dialog s lower right and in a Success dialog Update Database Use the Configuration Tools Update Database option to update your database Help Database Type Change Database User Management Update Database Run SQL Script E SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings M Update Database Current DB Version Press Get Version button to get curre Available DB Version Get Version Update DB Help Figure 16 The Update Database Dialog To update your database In the window s Update Database area the Current DB Version field prompts you to press the Get Ve
39. ck the SKFUSER folder and select Tasks Detach The Detach Database dialog displays e Enable the drop connections check box and click OK The mdf df files are removed from your SQL Server 2005 database 3 Exit SQL Server Management Studio 4 Disable or uninstall Microsoft SQL Server 2005 gt Only one service can run at a time If you no longer need Microsoft SQL Server 2005 it is recommended that you uninstall it If you do not uninstall Microsoft SQL Server 2005 you must disable the service to run Microsoft SQL Server 2008 SKF ptitude Analyst Installation Manual Installation Upgrading an Existing Version of the Software To disable the services Open the Computer Management dialog on your computer Start Control Panel Administrative Tools Computer Management and expand the Services and Applications node in the left pane and click Services In the right pane scroll to the SQL Server services and right click each service and select Properties The Service Properties dialog displays On the Service Properties dialog s General tab change the Startup Type to Disabled and press Stop to stop the service Click OK 5 Install Microsoft SQL Server 2008 administrative rights required gt Purchase Microsoft SQL Server 2008 Standard Edition from Microsoft and work with your database administrator to install the database manager prior to running the SKF ptitude Analyst installation During the SKF ptitud
40. cluding the following utilities Transaction Service Mx Service lt WMx Service Microlog Service License Key Manager Reguires OS Admin level ConfigTool Requires OS Admin level Mx Serial Configurator SKF ptitude Analyst Monitor nstallers for all applications Requires OS Admin level Supporting Applications SKF ptitude Decision Support version 3 0 CMSW 7450 add ons utilities SKF ptitude Analyst HMI version 1 x CMSW 7203 SKF Machine Analyst Remote Access version 1 x CMSW 5830 SKF ptitude Analyst Thin Client Transfer 2010 CMSW 7320 amp 7321 Interfaces and Miscellaneous SAP 4 7 amp 7 1 interface for SKF ptitude Decision Support and core modules SKF ptitude Analyst OPC client version x x CMSW 7473 SKF ptitude Software Developers Kit version x x ESDK SoundByte PRISM Conversion Ivy CMU Configurator DMx Manager Win 7 64 bit 1 8 SKF ptitude Analyst Installation Manual Installation Planning the Installation Data Acquisition Devices DADs Minimum Win 7 Comment F W 64 bit Version IMx 0 966 E Unit types S M T P KF Microlog Analyzer GX CMXA 70 SKF Microlog Analyzer GX CMXA 75 0 Requires 64 bit driver SKF Microlog Analyzer AX CMXA 80 0 Requires 64 bit driver Microlog Analyzer IS CMXA 51 IS 0 Requires an third party USB to Serial cable and 64 bit driver Microlog Analyzer CMVA 65 A Reguires an third party USB to Serial cable and 64 bit dri
41. ct any right provided for in this Agreement shall not be deemed a waiver of any further right under this Agreement Severability If any provision of this Agreement is invalid illegal or unenforceable under any applicable statute or rule of law it is to that extent to be deemed omitted The remainder of the Agreement shall be valid and enforceable to the maximum extent possible Read and Understood Each party acknowledges that it has read and understands this Agreement and agrees to be bound by its terms Limitations Period No action arising under or related to this Agreement may be brought by either party against the other more than two 2 years after the cause of action accrues unless the cause of action involves death or personal injury Attorneys Fees In the event any litigation is brought by either party in connection with this Agreement the prevailing party in such litigation will be entitled to recover from the other party all the costs reasonable attorneys fees and other expenses incurred by such prevailing party in the litigation Authorized Representative The person installing or using the Software on behalf of Licensee represents and warrants that he or she is legally authorized to bind Licensee and commit Licensee to the terms of this Agreement Injunctive Relief Licensee agrees that Licensor may suffer irreparable harm as a result of a violation of Sections 2 4 6 10 15 and 17 of
42. ction Server Host Make sure your firewall software does not block this port The Name TCP port and Connection Title for existing transaction services display in the screen s window e Use the Add Modify or Delete buttons with the Transaction Service Settings fields beneath the window to add new services modify existing services and delete existing services e f desired press the Test button to test your transaction service configuration A dialog indicates test results e Press the Save button to save your configuration e Press the Start button to start the selected transaction server e Press the Stop button to stop the selected transaction server e Press the Manage button to select a database connection The Manage Connections dialog displays Reference this chapter s previous Database Type Custom Database Installation section 2 16 SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Monitor Recovery SKF ptitude Monitor Recovery FR SKF ptitude Analyst Configuration Tool SKF ptitude Monitor Recovery Service Configuration File Help E Database Database Type Service name SKF ptitude Monitor Recovery Change Database Service status The service is not registered User Management Update Database Start Stop Run SQL Script E SKF ptitude Analyst Configuration Tool r Start Mode Action General Configuration ea x SKF ptitude HMI Connection
43. dd up the file sizes of all dbf files associated with your database name Instead purchase an upgraded database manager from Oracle or Microsoft 1 10 SKF ptitude Analyst Installation Manual Installation Upgrading an Existing Version of the Software Migrating to Oracle 11g or 11g XE Use the following steps to migrate prior version data to Oracle 11g or 11g XE 1 Prior to running the SKF ptitude Analyst installation open the older version of the Oracle Database Manager and create a dump file of your Oracle database Refer to your Oracle Database user manuals for instructions 2 To install Oracle 11g XE run the Oracle 11g XE installation located on the SKF ptitude Analyst installation DVD s Database Manager page OR Purchase Oracle 11g from Oracle and work with your database administrator to install the new database manager 3 Configure the new database instance with the required table spaces Use the provided skfuserts sql script to identify the sub steps required for this step Work with your database administrator to complete this step 4 Access the newly installed Oracle Database Manager and import the dump file created in step 1 5 Run the SKF ptitude Analyst installation and connect to the existing database The structure of the imported database will be upgraded to the current version Migrating to SQL Server 2008 Standard Edition or Express Edition from Oracle recommended Use the following
44. e tampering SKF ptitude Analyst applications always require read access to the product license key file Therefore setting the access rights to read only and additionally removing the LKM from the end user s PC should be sufficient to avoid tampering Operation of the License Key Manager The License Key Manager provides the ability to enter license keys manually or to use an existing license key file To manually enter a key Enter the license key in the License Key field and click Add If the license key is valid it appears in the Key Summary list If the key is not valid you are informed in the Messages area of this dialog gt The LKM reviews new license keys against its list of already entered license keys If a license key is entered with greater capabilities than the already entered license key the latter will be replaced For example if a license key exists that licenses SKF ptitude Analyst V4 1 for 5 users and a new license key is entered that licenses that same SKF ptitude Analyst V4 1 but now for 10 users the existing license key on file is replaced with the license key having greater capabilities SKF ptitude Analyst Installation Manual SKF ptitude Analyst License Key Manager Overview To import a license key file e f you have been provided with a license key file select File Import from the menu A Windows Open dialog displays e Locate the license file and click Open Any licens
45. e Analyst installation connect to the newly installed database manager 6 Attach the SKFUSER database to SQL Server 2008 To attach the SKFUSER database to SQL Server 2008 database Locate the mdf file you detached from SQL Server 2005 These files are typically located at C Program Files Microsoft SQL Server MSSQL Data Move the SKFUSER mdf database file to your SQL Server 2008 Data folder or another accessible location Open Microsoft SQL Server 2008 SQL Server Management Studio and connect using your SA Password In Management Studio on the Object Explorer pane right click the Databases folder and click Attach The Attach Databases dialog displays In the Databases to Attach area click Add The Locate Database Files dialog displays Browse to the SKFUSER mdf file and select it Click OK On the Attach Databases dialog the SKFUSER mdf ldf files display in the skf user database details area Click OK The Database folder on the Object Explorer pane updates to show the listing for the SKFUSER database Once the database is attached the SQL Server 2008 database will migrate SQL Server 2005 SKFUSER database system files to SQL Server 2008 Rebuild the SKFUSER database s users SKF ptitude Analyst Installation Manual Installation Initiating the Installation Process To rebuild the SKFUSER database s users e Use the SKF ptitude Analyst Configuration Tool to run the following sql script Re
46. e SKF Optitude Analyst database 2 22 SKF Optitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Microlog Service SKF ptitude Microlog Service skr ptitude Analyst Configuration Tool SKF ptitude Microlog Service Configuration ial x File Help Name Pot Connection Title Hostname Database Database Type Change Database User Management Update Database Run SQL Script SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service Add Edit Activate Remove Syne SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer Properties SKF ptitude Analyst License Key Manager Name LL SKF ptitude Home SKF ptitude IMx Service Port SKF ptitude Microlog Service Host SKF ptitude WMx Service ron SMTP Settings Connection title z Manage MV Send emails when service lost database connection Email list Start Stop Test Save Undo Localhost IP address 163 157 180 88 pi Help Figure 26 The SKF ptitude Microlog Service Configuration Dialog This dialog allows you to add one or more Microlog Services to the SKF ptitude Analyst system each Microlog Service appears on a row in the dialog s table A Microlog Service is necessary to enable communication between SKF Microlog Inspector devices and an SKF ptit
47. e WMx Service SMTP Settings f vy SKF ptitude Analyst Configuration Tool SKF ptitude Transaction Service Configuration W E Transaction Service Type 5 Server Host configures this computer as a Transaction Server Host Stand Alone System single user environment 5 Client configures this computer as a Transaction Server Client Name Port Connection Title 8088 sql_skfuser Transaction Service Settings sql_skfuser Figure 20 The SKF ptitude Translation Service Configuration Dialog The SKF ptitude Transaction Server is used as a communication layer between the applications and the database This is desirable in a network environment where multiple clients may try to access the database at the same time The Transaction Server processes some of the database requests reducing the load on the database itself thereby increasing performance gt You will need to install one Transaction Server per database installation for proper operation of the software system Each instance of the Transaction Server must be installed on a different computer You cannot have multiple instances of the Transaction Server running on the same machine Transaction Server Type options are Server Host Select this option to install the Transaction Server on this computer It is highly recommended to make the database host server the Transaction Server host when possible e Server Name always local host
48. e area network environment The Transaction Server can be installed on the database server computer or on one of the client computers on the same local area network as the database server During installation you must either configure the Transaction Server locally or enter the machine name or IP address where a previously configured Transaction Server is located When selecting the Transaction Server host keep the following in mind e If you are operating on a wide area network the Transaction Server host should be on the same local area network as the database host e The computer where the Transaction Server is installed needs to be accessible on your network to all of the computers that will be using the applications Make note of the connection information machine name or IP address and the 1 6 SKF ptitude Analyst Installation Manual Installation Planning the Installation TCP port number for the Transaction Server host as it is needed when configuring Transaction Server clients e The computer where the Transaction Server is installed needs to be always turned on so it is recommended that you install it on a server class machine that is either the database server or on the same local area network as the database server e Transaction Server uses a TCP port that is defined during the installation default is 8088 Make sure to allow this port by your firewall software installed on the host computer Important
49. e keys in the file that have not already been entered are appended to the Key Summary list gt By default license files are named LicFile alf To switch between product license key files By default license key files are stored on the local computer If you would like to place a copy of the license key file on the network where it can be shared by multiple installations you can switch to the network license key file Additionally there may be circumstances that require you to keep two license key files for use at different times gt The LKM operates only one license key file at the time e To switch between two files select File Use File Important Carefully review the end user license agreement before proceeding It is a violation of your agreement to share a license key file with more installations than you purchased e Amessage appears warning you that the selected license file will be used by all SKF ptitude Analyst applications and asking you whether you would like to proceed Select Yes to continue to a Windows Open dialog where you can select the license file gt If you have manually entered license keys at this dialog prior to selecting a license key file keys that are not in the selected license key file will be overwritten and the associated features will cease functioning To change the location of the product license key file e Select File Save As from the menu A Windows Save As dialog appears e Select
50. e license key is valid This column is only used when importing a license key file You will not be able to directly add an invalid key Refer to Operation of the License Key Manager below for details Version The software version covered by the license key Licenses The number of users covered by the license key Expiration Some features can be activated on a trial basis to allow you the opportunity to use the feature before making the decision to purchase In this situation the feature is activated for a specified time period The expiration date displays here Upon making a purchase a new license is provided without the time restriction Comment Allows the user to enter a comment about each license key in the license manager file Click the Set button to save your comment Description Provides information about the application associated with the key highlighted in the Key Summary list Delete Deletes the key currently highlighted in the Key Summary list Messages Shows the output of activities including error messages Copy Copy the license keys and messages to the clipboard which can then easily be pasted into other applications such as Microsoft Word or an e mail SKF ptitude Analyst Installation Manual SKF ptitude Analyst License Key Manager Overview Commonly Asked Questions The following section lists a number of commonly asked questions related to license keys in SKF ptitude Analyst Ope
51. e sure your firewall software does not block this port IMx hostname Read only displays the computer s host name Connection title Database connections identify specific SKF ptitude Analyst databases Select an existing database connection to be used by the IMx Service from the drop down list gt If you do not have existing database connections reference the Database Connections section later in this section for more detail Email List If the service loses connection to the database and you wish to automatically receive an email notification about the loss of connection enable the Send emails when service loses database connection check box Click the Email list button to enter email addresses to which the IMx Service will send notifications Type in the email accounts of the recipient OK Cancel Help Figure 25 The Email List Dialog gt Each email address must be separated by either a comma or semicolon gt Before the email recipients can receive these notifications you must first configure the SMTP settings Reference the SMTP Settings section later in this chapter When finished press the Save button to save the new IMx Service configuration the new IMx Service appears in the table and the new IMx Service initiates or press the Undo button to cancel the changes SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude IMx Service To edit an ex
52. e their database installation Install Wizard Welcome dialog press Next License Agreement press Next Choose Destination Location press Next Specify Database Passwords enter and confirm the SYS and SYSTEM database account password and press Next make a note of this password for future reference Summary press Install InstallShield Wizard Complete press Finish You are returned to the database manager type selection screen e At this point you should press the Return to Previous Menu button and proceed to install SKF ptitude Applications SKF ptitude Analyst Installation Manual Installation Installing the SKF ptitude Analyst Applications Installing the SKF ptitude Analyst Applications View Installation Manuals Prerequisites Database Manager SKF ptitude itori i Monitoring Suite SKF ptitude Applications View User Manuals Figure 4 The Install Applications or View Manuals Menu e From the Install Applications or View Manuals menu select SKF ptitude Applications The Product Installation Menu launches 1 20 SKF Optitude Analyst Installation Manual Installation Installing the SKF ptitude Analyst Applications SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Analyst Human Machine Interface SKF ptitude Analyst SKF ptitude Thin Client Transfer Monitoring Suite SKF ptitude Decision Support SKF ptitude Analyst DMx Manager Figure 5 The SKF
53. echnology that created an adverse impact on the operation functioning or performance of the Software EXCEPT AS SET FORTH IN THIS SECTION 7 AND TO THE EXTENT PERMITTED BY APPLICABLE LAW ALL EXPRESS AND OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY MERCHANTABILITY OF A COMPUTER PROGRAM INFORMATIONAL CONTENT SYSTEM INTEGRATION FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT ARE HEREBY DISCLAIMED AND EXCLUDED BY LICENSOR The remedies set forth in this Section 7 are the exclusive remedies available to Licensee for any problem in the performance of the Software 8 LIMITATIONS ON LIABILITY a Limitations and Exclusions IN NO EVENT WILL LICENSOR BE LIABLE TO LICENSEE FOR ANY DIRECT INDIRECT INCIDENTAL CONSEQUENTIAL PUNITIVE OR OTHER SPECIAL DAMAGES LOST PROFITS OR LOSS OF INFORMATION SUFFERED BY LICENSEE ARISING OUT OF OR RELATED TO THIS AGREEMENT OR THE USE OF THE SOFTWARE FOR ALL CAUSES OF ACTION OF ANY KIND INCLUDING TORT CONTRACT NEGLIGENCE STRICT LIABILITY BREACH OF WARRANTY OR CONDITION AND STATUTORY EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES THE PRECEDING EXCLUSION AND DISCLAIMER OF DAMAGES SHALL APPLY TO ALL CLAIMS MADE BY LICENSEE RELATED TO OR ARISING OUT OF LICENSEE s USE OF THE SOFTWARE INCLUDING BUT NOT LIMITED TO CLAIMS ALLEGING THAT THE SOFTWARE OR ANY COMPONENT THEREOF FAI
54. ed e Click Finish to close the wizard and return to the main installation menu e Click the back arrow twice to return to the Select Language menu e Click exit to close the menu SKF ptitude Analyst Installation Manual 4 Installation Maintenance Removing your Installation Once initial setup has been completed you can re launch the installation at any time to uninstall SKF ptitude Analyst To re launch the setup program e Insert the Application DVD into your DVD drive The install program automatically launches gt If the install program does not run automatically double click the Autorun exe file on the installation DVD to manually launch the install program e Select the appropriate language from the displayed menu e Select SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Analyst HMI The Modify repair or remove the program page displays gt In some cases a message displays that an older version of the software was detected and the setup aborts If this occurs access Add or Remove Programs from the Windows Control Panel Locate the SKF ptitude Analyst option and select Remove The Remove the program page displays Options include Remove Uninstalls SKF ptitude Analyst If you select Remove at the Remove the program page a confirmation displays asking you to verify your decision to uninstall SKF ptitude Analyst e Select Yes to uninstall SKF ptitude Analyst including all ins
55. efault location on the computer To specify the database configuration tool e Select the File menu s Settings option The Settings dialog displays CT Hx Database Tool Automatically find suitable database tool for databases Specify a database tool for Configuration Tool Help Cancel Figure 9 The File Menu s Settings Dialog e Use the options buttons to select either Automatically find suitable database tool for databases The application will search for the proper database tool for the installed database Specify a database tool for Configuration Tool If necessary use the Browse button to specify the correct database tool i e if working with multiple databases Database Type Sections below describe database installation procedures for both a standard single client database installation and a custom database installation Reference the section appropriate for your type of installation Standard Single Client Database Installation With first time installations you must first copy demo database files from the installation DVD prior to setting up your ptitude Analyst database Procedures below detail how to set up both SQL Server and Oracle Demo databases Follow the procedure that is appropriate for you type of installation SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool Database Type SQL Server Demo Database The general steps for acqu
56. ensor and that Licensee has discontinued its use of the Software ASSIGNMENT Licensee shall not assign or otherwise transfer the Software or this Agreement to anyone including any parent subsidiaries affiliated entities or third Parties or as part of the sale of any portion of its business or pursuant to any merger consolidation or reorganization without Licensor s prior written consent Any assignment or transfer effected in violation of this Section 10 shall be void ab initio and of no force or effect FORCE MAJEURE Neither party shall be in default or otherwise liable for any delay in or failure of its performance under this Agreement if such delay or failure arises by any reason beyond its reasonable control including 12 13 14 any act of God any acts of the common enemy the elements earthguakes floods fires epidemics riots failures or delay in transportation or communications provided however that lack of funds shall not be deemed to be a reason beyond a party s reasonable control The Parties will promptly inform and consult with each other as to any of the above causes that in their judgment may or could be the cause of a delay in the performance of this Agreement NOTICES All notices under this Agreement are to be delivered by depositing the notice in the mail using registered mail return receipt 15 requested to the party s last known principal business address or to any other addres
57. etails To access this manual select the Windows Start menu s Program Files SKF ptitude Monitoring Suite Manuals option What s the Next Step After installing SKF ptitude Analyst the next step you take depends on if you need to install additional applications and what devices you will be using reference the SKF ptitude Installation and Upgrade Matrix at the beginning of this chapter The SKF ptitude Transaction Server is used as a communication layer between the applications and the database This is desirable in a network environment where multiple clients may try to access the database at the same time The Transaction Server processes some of the database requests reducing the load on the database itself thereby increasing performance gt You will need to install one Transaction Server per database installation for proper operation of the software system Each instance of the Transaction Server must be installed on a different computer You cannot have multiple instances of the Transaction Server running on the same machine SKF ptitude Analyst Installation Manual Installation What s the Next Step Follow the steps below a Required for all users Launch the SKF ptitude Analyst Configuration Tool which is automatically installed during the SKF ptitude Analyst installation to configure your database to work with SKF ptitude Analyst If running a WMx IMx system and or Microlog Inspector this i
58. herwise make available the Confidential Information to any Person nor use the Confidential Information except as authorized by this Agreement Licensee shall not disclose the Confidential Information concerning the Software including any flow charts logic diagrams user manuals and screens to persons not an employee of Licensee without the prior written consent of Licensor b LIMITED WARRANTIES a Licensor warrants that the Software will perform substantially in c accordance with its documentation for a period of 180 days from the date of shipment of the Software provided however that the foregoing warranty only applies if i Licensee makes Licensor aware of any defect with the Software within seven 7 days after the occurrence of the defect ii Licensee has paid all amounts due under this Agreement and iii Licensee has not breached any provision of this Agreement The foregoing warranty does not apply in the event that i the Software and documentation have been subject to misuse neglect alteration modification customization improper installation and or unauthorized repair ii the Software or any associated software or equipment have not been properly maintained in accordance with applicable specifications and industry standards or have been maintained in unsuitable environmental conditions or iii Licensee has used the Software in conjunction with other equipment hardware software or other t
59. ide of Licensee s principal business offices iv rent resell lease timeshare or lend the Software to any Person v sublicense assign or transfer the Software or this license for the Software to any Person vi reproduce distribute or publicly display the Software vii viii ix x xi xi xii make the Software accessible to any Person by any means including posting on a web site or through other distribution mechanisms over the Internet reverse assemble disassemble reverse engineer reverse compile decompile or otherwise translate the Software or prepare Derivative Works based on the Software place reproduce or make available the Software on Licensee s computer network if Licensee is only authorized by this Agreement to operate the Software on a single workstation exceed at any given point in time the total number of network clients authorized by the applicable purchase order or ordering document to use or access the Software edit or modify the Software except as expressly authorized by Licensor including altering deleting or obscuring any proprietary rights notices embedded in or affixed to the Software use the Software in any manner that disparages Licensor Microsoft or Oracle or use the Software in a way that infringes the Intellectual Property Rights of the foregoing parties or use the Software in a manner that violates any federal state
60. ing data 1 You can leave the older version of the database manager installed and simply upgrade the structure of the database to be compatible with the new software version If you choose to continue to use the older version of the database manager the database upgrade is performed using the SKF ptitude Analyst Configuration Tool 2 f you would like to upgrade your database manager you can install a new version of the database manager and migrate the older data For your convenience the installation DVD includes the latest versions of the Express editions of the Oracle and Microsoft SQL Database Managers Select the Database Manager option from the main page to install a supporting database If you choose to install a new version of the database manager the new database must be in place prior to installing SKF ptitude Analyst Work with your Database Administrator or IT Personnel to upgrade the database and create a data migration plan The procedure to migrate existing data varies depending on the database type that is selected WARNING Oracle 11g Express offers up to 11 GB of database storage capacity and SQL Server 2008 R2 offers up to 10 GB of database storage capacity If you would like to upgrade your database manager but your existing database is larger than 11 GB 10 GB or could become larger over time do not install the express edition of the database manager To determine the size of your current Oracle database a
61. installation During the SKF ptitude Analyst installation connect to the newly installed database manager gt If you install the Microsoft SQL Server 2008 database manager prior to the SKF ptitude Analyst installation make sure you select the Mixed Mode Authentication during the SQL Server 2008 installation 3 Use the SKF ptitude Analyst Configuration Tool to attach the provided demo database SKFUSER mdf Reference Chapter 2 SKF ptitude Analyst Configuration Tool for details 4 Once the installation is complete open SKF ptitude Analyst and select the File menu s Import Analyst Data option to import the prior version s data Migrating to SQL Server 2008 Standard Edition or Express Edition from SQL Server 2005 Use the following steps to migrate prior version data to Microsoft SQL Server 2008 Express Edition or Standard Edition from a Microsoft SQL Server 2005 database gt It is recommended that you close all SKF ptitude Analyst connections before proceeding with the migration process 1 Prior to running the SKF ptitude Analyst installation open Microsoft SQL Server 2005 SQL Server Management Studio and connect using your SA Password 2 Detach the SKFUSER mdf and ldf database files from your Microsoft SQL Server 2005 database To detach the SKFUSER mdf ldf database files e In SQL Server Management Studio on the Object Explorer pane expand the Databases folder and locate the SKFUSER folder e Right cli
62. iring and using the SQL Server Demo database are e Acquire the SQL Server Demo database files e Set the database type to SQL Server e Attach the SQL Server Demo database to ptitude Analyst To acquire the SQL Server Demo database files e Copy the Demo database files skfuser mdf and skfuser ldf from the installation DVD path location DVD Drive DB_INST SQL e Paste these files to the SQL Server default location on your computer Drive Program Files Microsoft SQL Server MSSQL10_50 MSSQLSERVER MSSQL DATA To set the type of database to SQL Server e Launch the SKF ptitude Analyst Configuration Tool e Under Database select the Database Type option The Database Type Configuration dialog displays Mg SKF ptitude Analyst Configuration Tool Database Type Configuration File Help Database Database Type Lall aast EVS Connections sql_skfuser M Change Database User Management Update Database Run SQL Script SKF ptitude Analyst Configuration Tool General Configuration Connection title SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer sg sklusef DB connect name SKF ptitude Analyst License Key Manager USSDGCND130CMXAISOLEXPRESS SKF ptitude Home x SKF ptitude IMx Service Test DB Connection Set active Help SKF ptitude Microlog Service SKF ptit
63. isting IMx Service e Select the IMx Service to edit from the table and press the Edit button then edit the IMx Service properties as described above When finished press the Save button to save any changes confirmation prompts appear or the Undo button to cancel any changes To deactivate activate an existing IMx Service At times you may wish to deactivate an IMx Service stop communication between the IMx devices and its database then reactivate it at a later time This operation is needed if you decide to move the IMx Service to another computer e Inthe table select the IMx Service to deactivate and press the Deactivate button The selected IMx Service is deactivated but not removed from the IMx Services table gt Any IMx devices that were configured to communicate with this IMx Service will no longer have their data saved in the SKF ptitude Analyst database The deactivated IMx Service still appears in the table but when selected the Deactivate button changes to an Activate button indicating the IMx Service is not currently operating Press the Activate button to resume the IMx Service s communication operations To remove an IMx Service e Inthe table select the IMx Service to remove and press the Remove button The selected IMx Service is deactivated and removed from the IMx Services table gt Any IMx devices that were configured to communicate with this IMx Service will no longer have their data saved in th
64. itude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Figure 14 The Change Database Dialog If you are utilizing multiple databases the Change Database option allows you to Attach to a different SQL Server database or Import a different Oracle database s dmp file WARNING You should backup your existing database before applying this feature To change to a different database or use the demo database e Inthe Data file location field use the browse button to specify the SQL database s mdf file or the Oracle database s dmp file respectively gt If you are a new user you can Attach to the Demo database provided on the Application DVD SQL demo database path DB_INST SQL SKFUSER MDF Oracle demo database path DB_INST 11g P4DEMODB DMP e When the correct database file is identified press the Attach button for SQL Server databases or the Import button for Oracle databases The process will take several minutes to complete SKF ptitude Analyst 2 9 Installation Manual SKF ptitude Analyst Configuration Tool Change Database User Management skr ptitude Analyst Configuration Tool Database User Configuration File Help E Database Database Type Change Database User Management Update Database Run SQL Script E SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude H
65. itude Inspector SKF d ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family suite and the trade dress logos and other designations of source used by Licensor to identify the Software are trademarks or registered trademarks of Licensor Licensee shall not use Licensor s trademarks or service marks without the prior written consent of e Licensor If the Software contains any active links to web sites you agree to maintain such active links and not redirect or modify them f GENERAL PROVISIONS a b c Complete Agreement The Parties agree that this Agreement is the complete and exclusive statement of the agreement between the Parties which supersedes and merges all prior proposals understandings and all other agreements oral or written between the Parties relating to the use of the Software 9 Amendment This Agreement may not be modified altered or amended except by written instrument duly executed by both Parties Any purchase orders or other ordering documents issued to Licensee by Licensor shall not have the effect of amending or modifying this Agreement and shall only serve to memorialize the number of licenses or products ordered by Licensee In the event of a conflict between the PSP Policies and this Agreement the terms of this Agreement shall control i h Waiver The waiver or failure of either party to exercise in any respe
66. l 4 1 upgrade 1 10 V Vista 1 7 W Windows 4 5 installer 1 22 Windows Vista 1 7 WMx Conversion Utitlity 2 27 WMx database conversion 2 27 WMx service deactivate 2 28 editing 2 28 remove 2 29 WMx service 2 26 adding 2 27 Index 2 SKF ptitude Analyst Installation Manual
67. llection occurs at a remote location without an SKF ptitude Analyst installation This method requires a connection to the Transaction Server to upload download to the SKF ptitude Analyst installation but does not require a Transaction Server connection to communicate with the DADs A Note About Thin Client Transfer Licenses SKF ptitude Analyst Thin Client Transfer File CMSW7320 file transfer mode and SKF ptitude Analyst Thin Client Transfer Direct CMSW7321 direct database communication mode products are licensed separately Each license specifies the number of remote computers that may upload data to SKF ptitude Analyst Once you upload data from your DAD one of the licenses for that upload method is permanently tied to the computer that was used to either perform the upload or generate the upload file Licenses are validated during upload using the Transaction Server to which the Thin Client Transfer installation connects You do not need to enter license keys at each location where Thin Client Transfer is installed rather licenses are entered using the License Key Manager on the computer hosting the Transaction Server If you have one license key file on your network that is shared by multiple installations of SKF ptitude Analyst you may enter the Thin Client Transfer licenses in the License Key Manager at any SKF ptitude Analyst installation If each installation uses its own license file you must enter the keys on the comp
68. mation on this page and click Next to open the SKF ptitude Analyst License Key Manager program SKF ptitude Analyst Installation Manual Installation Installing the SKF ptitude Analyst Applications CS _ ltl x Fie ep Erger each of the license keys provided wth you purchase Figure 6 The SKF ptitude Analyst License Key Manager Program gt You may access this program at any time after installation to upgrade or change the configuration of your system by selecting the Windows Start menu s All Programs SKF ptitude Monitoring Suite Admin Tools License Key Manager option gt Reference Appendix A SKF ptitude Analyst License Key Manager for details on setting up your license keys or click the Help button to use the help file e When you are satisfied with your selections click Next to return to the installation wizard e Click Next The Start Copying Files page appears SKF ptitude Analyst Installation Manual Installation Installing the SKF ptitude Analyst Applications The Start Copying Files Page SKF ptitude 2012 InstallShield Wizard 5 x Start Copying Files Review settings before copying files K E Installshield Setup has enough information to start copying the program files If you want to review or change any settings click Back If you are satisfied with the settings click Next to begin copying files Current Settings Database Database Tools
69. mputer on which you are installing meets the minimum system requirements If you are performing a multi user installation you must choose a computer to host and serve the data When selecting the database computer keep the following in mind e The computer where the data resides must have sufficient hard drive space for the initial installation files plus any data that is added At least 10 gigabytes of free disk space is recommended e The computer where the data resides needs to be accessible on your network to all of the computers that will be using the applications e The computer where the data resides needs to be turned on when other people want to use the software Once you ve decided where to install the database server you can perform the client installation on any other computers that need to access the data The client computers require Important The 32 bit Oracle database client must be installed and configured on the local client workstation prior to installing SKF ptitude Analyst Contact your database administrator or IT department for assistance Transaction Server Service Considerations If you are performing a multi user installation in addition to the database server you also need to select a computer to host the SKF ptitude Transaction Server service The Transaction Server acts as a communication layer between the applications and the database streamlining database access for faster processing in a wid
70. n Service set SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transter Help SKF ptitude Analyst License Key Manager SKF ptitude Microlog Service M Register HMI Connection Service The service is not registered Register M HMI Connection Service status Unregister The service is not running Figure 19 The SKF ptitude HMI Connection Configuration Dialog The Register HMI Connection Service area displays the HMI Connection Service s current registration status Status is either registered or not registered e Use the Register or Unregister buttons to change the current HMI Connection Service registration status The HMI Connection Service status area displays the current HMI connection status Status is either running or not running e Use the Start and Stop buttons to change the HMI Connection Service status SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Transaction Service SKF ptitude Transaction Service File Help E Database Database Type Change Database User Management Update Database Run SQL Script SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitud
71. nce the SKF WMx Conversion Utility PDF file on your SKF ptitude Analyst installation DVD located in Too s WMx for more details e Select the dialog s Add button then use fields in the dialog s Properties area to configure the new WMx Service gt If no database connections yet exist the Manage Connections dialog automatically appears allowing you to add a database connection Reference the Database Connections section later in this section for more detail Name Enter a unique name to identify the WMx Service alphanumeric and underscore characters only Service Port Enter the computer s TCP Port used for the communication with the WMx devices Each WMx Service must have a unique Port number Make sure your firewall software does not block this port Internal Port Enter the internal port number that the WMx Service requires for internal communications Typically this is one digit higher than the Service Port number For example if the Service Port number is 8000 then the Internal Port number should be 8001 Host Read only displays the computer s host name Connection title Database connections identify specific SKF ptitude Analyst databases Select an existing database connection to be used by the WMx Service from the drop down list gt If you do not have existing database connections reference the Database Connections section later in this section for more detail Email List If the service loses
72. o have a temporary license When the Add On s temporary license expires its functionality and features are removed from the main menus Data acquired with and or associated with the Add On remains part of the database and is not lost Supporting applications provide added functionality but reside outside the core application they require their own key and serial number Do need a new product license key when updating to a newer major version of the application currently use Yes Product license keys enable a specific application functionality and maintenance version Please contact your sales representative with any questions received a new product license key How do validate that it entitles me to the functionality purchased The simplest way to verify the entitlements of a product license key is to add the key to the current license file using the LKM The LKM shows the specific entitlements such as number of application clients serial number expiration date etc How do upgrade the number of users for my SKF ptitude Analyst installation You will need to purchase the upgrade for the desired number of users After purchase SKF will extend a new product license key to you which replaces your existing product license key for the application you upgraded For example assume that you are currently licensed to run five concurrent users for SKF ptitude Analyst The existing license key file holds
73. o which it is licensed based on the configured license key and presents itself as one of the following four core applications e SKF ptitude Analyst for SKF Microlog Analyzer supports Microlog Analyzer only e SKF ptitude Inspector supports MARLIN and Microlog Inspector only e SKF ptitude Analyst for Multilog On line Systems supports CMU and TMU only SKF ptitude Analyst A 1 Installation Manual SKF ptitude Analyst License Key Manager Overview e SKF ptitude Analyst supports Microlog Analyzer Microlog Inspector MARLIN CMU TMU LMU MIM IMx and DMx In addition to the core functionality end users may obtain licenses for one or more add ons which further extend the features of the installed software Licenses are provided to activate the individual add ons that have been purchased Licenses are also used to grant concurrent use of the software in a network environment Options on this dialog include New License Key Used to add a new key Refer to Operation of the License Key Manager later in this section for details Key Summary list Displays information about configured license keys Product Number The SKF model number that identifies the product associated with the license key Serial Number The serial number that uniquely identifies your purchase summary If you ever require technical or sales support having your serial number will greatly speed the process Valid Indicates whether th
74. od to run SQL scripts that help configure or repair your SKF ptitude Analyst database r m SKF ptitude Analyst Configuration Tool Database SQL Script oam File Help 3 Database Database Type Change Database User Management Update Database 3 SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF Gptitude IMx Service SKF ptitude WMx Service SMTP Settings Run SQL Script Script directory No working directory set anta Script location asm E Save script output Help Script output Figure 17 The Run SQL Script Dialog To run an SQL script e Inthe Script Directory field specify the folder containing the script you wish to run e Inthe Script Location field use the browse button to locate the script to run e If you would like to Save the script output as a file enable the checkbox e Press the Execute button You are prompted to enter your password Enter your password and press OK The script executes and the results display in the Script Output area SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Analyst Configuration Tool gt If Save script output is enabled a Save As dialog prompts for file name
75. on Review this matrix and proceed as described for your type of installation SKF ptitude Analyst Installation and Upgrade Matrix First Time Installation Application Upgrade i e from v6 0 to v7 0 Maintenance Release installed from downloaded file Uninstall Application but not the databases described in Chapter 5 Installation Maintenance Removing Your Installation Run Prerequisites described in Chapter 1 Installation Installing Prerequisite Applications Install Database Manager described in Chapter 1 Installation Database Installation Install Application described in Chapter 1 Installation Installing the SKF ptitude Analyst Applications X run the downloaded file From the Configuration Tool Acquire the Demo database specify the database type and connect the database to ptitude Analyst described in Chapter 2 SKF ptitude Analyst Configuration Tool Database Configuration Options Database Type From the Configuration Tool Update Database described in Chapter 2 SKF ptitude Analyst Configuration Tool Database Configuration Options Update DB SKF ptitude Analyst Installation Manual Installation Important How to Facilitate a Quick Easy Product Installation A Note about Installation CDs In your SKF ptitude Monitoring Suite packaging you will find a case containing one or more CDs DVDs depending on the
76. on requirements Adobe Reader version 7 0 or newer is required and must be installed to view and print the pdf datasheet Download Adobe Reader from the Adobe website gt Internet access is required to open the datasheet e Click here to open the SKF ptitude Analyst data sheet PDF SKF ptitude Analyst Installation Manual Installation Technical Support Technical Support If installation assistance is needed contact SKF USA Inc 5271 Viewridge Court San Diego CA 92123 USA Telephone 800 523 7514 FAX 858 496 3534 Email TSG Americas skf com North and South America TSG EMEA skf com Europe Middle East and Africa Or contact Technical Support through our web site www skf com cm Planning the Installation Prior to installing SKF ptitude Analyst take a moment to complete the necessary installation requirements Database Consideration Prior to installing SKF ptitude Analyst you must install a supported database The application supports e Oracle database version 11g Express and Standard e Microsoft SQL Server 2008 and 2008 R2 Standard Edition or Express Edition If one of these database managers already exists on your network the installation process connects to the existing database gt Consult with your database administrator or IT personnel to obtain connection information If you connect to an existing Oracle database you will need to know the Instance Name the SYS passw
77. onditionally agree not to plead argue or claim in any such court that any Legal Proceeding brought in any such court has been brought in an inconvenient forum and otherwise waive any and all objections to the forum EXPORT CONTROLS Licensee shall not export or reexport directly or indirectly the Software without complying with the export controls imposed by the United States Export Administration Act of 1979 as amended or any future U S export control legislation and the regulations promulgated thereunder GOVERNMENT END USERS If Licensee is acquiring the Software for or on behalf of a subdivision of the U S federal government this Section 16 shall apply The Software was developed completely at private expense is existing computer software is a trade secret for all purposes of the Freedom of Information Act is restricted computer software and in all respects proprietary data belonging solely to Licensor and all rights are reserved under the copyright laws of the United States Use duplication or disclosure by the Government is subject to restricted rights as set forth in subparagraphs a through d of the Commercial Computer Software Restricted Rights clause at FAR 52 227 19 or for DoD units the restrictions as set forth in subparagraph c 1 ii of the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 17 TRADEMARKS Licensee agrees that SKF ptitude 18 Analyst SKF pt
78. or other modifications including custom modifications to Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family suite and any and all user manuals The term Software also includes any supplemental add on or plug in software code provided to Licensee in the course of receiving Product Support Plan services from Licensor The term Software shall not be construed to include the source code for Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family suite 2 LICENSE a Grant of License Licensor grants b Licensee pursuant to the terms and conditions of this Agreement a non exclusive non transferable and revocable license to use the Software in strict accordance with the terms and conditions of this Agreement including any concurrent use network or other limitations set forth in subsection b below All rights not specifically granted by Licensor under this Agreement are retained by Licensor and withheld from Licensee Installation and Use Rights Licensee shall use the Software only on its internal computer equipment whether such equipment is owned leased or rented at the Licensee s principal business office The following p
79. ord and the SYSTEM password If you connect to an existing Microsoft SQL Server 2008 database you will need to know the SQL Database Instance Name and the SA Password gt If you are installing a client and are not updating the host database you only need the database instance name gt Refer to the Upgrading an Existing Version of the Software section for more information on database upgrade options gt The installation program will check for an existing SKF database If no database is found a Demo database is installed e f asupported database manager is not already installed click the Database Manager option on the Install Applications or View Manuals menu and select to install either Oracle 11g Express or SAL Server 2008 Express before installing the SKF ptitude Analyst application SKF ptitude Analyst Installation Manual Installation Planning the Installation SKF ptit de Oracle 11g Express u Monitoring suite E SQL Server 2008 Install SQL Server 2008 Express G Figure 1 The Database Manager Installation Options gt Acopy of both Oracle 11g Express 32 bit and MS SQL Server Express 2008 R2 32 bit database managers are provided on the SKF ptitude Analyst DVD for your convenience gt If your system is running Windows 7 operating system 32 or 64 bit and you wish to install Oracle you must obtain and install Oracle 11g R2 32 bit The Oracle 11g Express provided on the
80. product license key expiration date affect my installation A Product license keys may have an embedded expiration date The expiration date gives a user the ability to operate an SKF ptitude Analyst application for a limited period of time It is in essence a temporary license Using the LKM one may determine the specific expiration date for a given license key SKF ptitude Analyst applications that are enabled under a temporary license may show a warning message upon startup or show the expiration date in the main window s title The expiration of the application is enforced at the point of startup Temporarily licensed applications operate identically to permanently licensed applications however all functionality is lost after the expiration date To restore functionality please contact your sales or customer representative Any acquired and stored data will be restored when the expired license key is replaced by either a new temporary or permanent license SKF ptitude Analyst products may be separated into a the core application b add ons and c supporting applications Add ons extend the functionality of the main application and entirely integrate into the main application s menu and help system Both core application and Add on functions require an appropriate product license key Both may have an expiration date although the most common situation will be for the core application to be licensed permanently and the Add On t
81. prompts you for the SYS password e Enter the password you selected during the Oracle 11g Express installation and press OK You are then prompted for the SYSTEM password Enter the same password and press OK You must now perform the Update DB option reference the Update Database section later in this chapter Custom Database Installation Specify the type of database to use with SKF ptitude Analyst nex File Help El Database Database Type Connections emocal 7 Manage Change Database User Management Update Database Run SQL Script Oracle S 109 100 XE El SKF ptitude Analyst Configuration Tool Connection title General Configuration SKF ptitude HMI Connection emlocal SKF ptitude Transaction Service BS connect name SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer p E SKF ptitude Analyst License Key Manager SKF ptitude Home Test DB Set active Help SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Figure 12 The Custom Database Type Dialog SKF ptitude Analyst 2 5 Installation Manual SKF ptitude Analyst Configuration Tool Database Type Options Include Connections Specify the selected database s name gt Consult with your database administrator or IT personnel to obtain connection information Database connections identify a specific SKF ptitude Analyst database b
82. ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery He SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Figure 22 The SKF ptitude Analyst Thin Client Transfer Configuration Dialog Thin Client Transfer is a small application that deploys very easily and facilitates data transfer to and from Microlog and MARLIN Data Acquisition Devices DADs without using the SKF ptitude Analyst interface via a connection through the SKF ptitude Analyst Transaction Server After installation of Thin Client Transfer use this dialog to specify Transaction Server Host Enter the machine name or IP address of the computer where the Transaction Server is installed Transaction Server Port Enter the TCP Port used for communication with the Transaction Server host This must match the same port configured on the Transaction Server host Make sure your firewall software does not block this port e lf desired press the Test Connection button to test your transaction service configuration A dialog indicates test results e Press the Save button to save your configuration SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Analyst License Key Manager SKF ptitude Analyst License Key Manager sk
83. r ptitude Analyst Configuration Tool SKF ptitude Analyst License Manager 5 xj File Help Run License Key Manager El Database Database Type Please click the button below to launch License Key Manager Change Database User Management Update Database License Key Run SQL Script El SKF ptitude Analyst Configuration Tool Help General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Trensfer SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Figure 23 The SKF ptitude Analyst License Manager Dialog This dialog is added as a convenience to allow you to quickly launch the SKF ptitude Analyst License Key Manager detailed previously in this Installation Manual To launch the License Key Manager e Press the License Key button The SKF ptitude Analyst License Key Manager window appears gt Reference the License Key Manager section previous in this Installation Manual for details on using the License Key Manager SKF ptitude Analyst 2 19 Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude IMx Service SKF ptitude IMx Service R SKF ptitude Analyst Configuration Tool SKF ptitude IMx Service Configuration 21 x File Help El Database Database Type Change Database User Management Update Da
84. r one or more email addresses to which to send a test email If an error message displays check your settings and make any necessary changes then click the Test button again 2 30 SKF ptitude Analyst Installation Manual 3 Installing SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst Installation Manual SKF ptitude Analyst Thin Client Transfer is a small application that deploys very easily and facilitates data transfer to and from Microlog and MARLIN Data Acquisition Devices DADs without using the SKF ptitude Analyst interface gt Thin Client Transfer is not for use with Microlog Inspector devices Thin Client Transfer has two modes of communication Direct communicate with an SKF ptitude Analyst database This method provides database communication that allows data to be uploaded to and downloaded from a Microlog or MARLIN DAD from a remote client computer bypassing the SKF ptitude Analyst application interface This is done by directly connecting with the SKF ptitude Analyst database via an optimized connection through the SKF ptitude Analyst Transaction Server This method requires a connection to the Transaction Server at all locations where Thin Client Transfer is installed File Transfer This method allows users to transfer data via a file without requiring a direct connection between the Microlog or MARLIN DAD and the computer hosting SKF ptitude Analyst This is primarily used when data co
85. ration and use of the License Key Manager is described after this section Q Where are the product license keys stored A All product license keys are maintained in a license key file License key files are indicated by the filename extension alf This file may be located on the end user s PC or on a shared network drive It is possible to make backup copies of a license key file Only one license key file is active at any given time gt If license key file is on a shared network drive this location must be accessible by all clients Q How do obtain a license key A When an SKF ptitude Analyst product is purchased SKF ships a support package to the end user This support package may come in several different forms depending on the particulars of the purchased items As part of the support package a license key letter is included which lists all applicable license keys If by accident the support package did not include this license key letter or the letter was misplaced one may obtain a copy of this from the designated Customer Service representative Product license keys may also be distributed as part of an email Q How do manage license keys A During first time installation as well as additional purchases of other software modules later on one must update the license key file to enable the purchased items The SKF ptitude Analyst License Key Manager is the primary method for maintaining the license key file
86. rerequisites The prerequisite page displays the programs you must install for SKF ptitude Analyst to run properly SKF ptitude Analyst Installation Manual Installation Installing Prerequisite Applications akF m ail Windows Installer Net Framework 3 5 SKF ptitude Monitoring Suite Net Framework 4 0 Windows PowerShell MW 2 R Figure 2 The Prereguisites Page e Click each item on the Prerequisites page in the order they are presented and follow the on screen prompts to install each program After each installation you will be returned to the Prereguisites page gt You may be prompted to restart your computer after running the Windows Installer and Net Framework gt Ifa prerequisite is already installed a message displays indicating that the prerequisite is already installed on your system Once you have installed the required programs you are ready to install a supported database manager e Click the back button to return to the Install Applications or View Manuals menu 1 16 SKF ptitude Analyst Installation Manual Installation Database Installation Database Installation Prior to installing SKF ptitude Analyst use the Install Applications or View Manuals menu and the Database Manager option to install your ptitude Analyst database manager e From the Install Applications or View Manuals menu select the Database Manager option The Database Manager
87. rsion button to display your current database version Press the Get Version button You are prompted to enter your skfuser1 password Enter your password default is cm and press OK The current database version displays in the Current DB Version field Feedback displays in the information area Compare the Current DB Version with the Available DB Version shown If the two versions match your database is up to date and you may exit the Configuration Tool If the Available DB Version is newer than the current database version press the Update DB button to update to the available version You are again prompted for your password Enter your password and press OK The database is updated Results display in the information area SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool Run SQL Script gt If you are using an Oracle database and if you have not updated with previous ptitude Analyst updates as they were made available or if you have previously performed a custom database configuration a prompt indicates that required INDX tablespace is missing from your database In this case press OK then enter your SYS password to create the INDX tablespace and update the database If you do not know your SYS password press Cancel at the SYS password prompt and ask your Database Administrator for assistance Run SQL Script The SKF ptitude Analyst Configuration Tool provides an easy meth
88. s Next Setup Role Next Feature Selection Next Installation Rules Next Instance Configuration Next Disk Space Requirements Next Server Configuration Next Database Engine Configuration Next Note on this dialog the default password for the Sql Server sa is specified as skf Please make a note of this Error Reporting Next Installation Configuration Rules Next Ready to Install Install Complete Close You are returned to the database manager type selection screen e At this point you should press the Return to Previous Menu button and proceed to install SKF ptitude Applications 1 18 SKF ptitude Analyst Installation Manual Installation Database Installation ptitude Analyst s DVD Oracle 11g Express Installation gt If installing a full version Oracle database your IT database administrator may contact SKF Technical Support Group for assistance To install the Oracle 11g Express database For your convenience this Oracle 11g Express installation has been pre populated with standard settings for use with SKF ptitude Analyst Therefore for standard installations you should not change any of the pre populated settings in the installation dialogs You should simply press OK Next or Install as applicable for each dialog as you progress through the installation The installation dialog progression is listed below of course this does not apply for those wishing to customiz
89. s also where you will set up WMx IMx Microlog Inspector devices in SKF ptitude Analyst Reference the SKF ptitude Analyst Configuration Tool chapter for detailed instructions on how to configure your database o If you are a new user you must first acquire the demo database file s then configure your database by first selecting your database type on the Database Type dialog and then either Attach to an SQL database or Import an Oracle database s dump file on the Change Database dialog Reference the Chapter 2 Database Configuration Change Database section for details o If you are an existing user you must update your database on the Update Database page Run the Transaction Server for each standalone and server database installation Client installations must be configured to point to the transaction server location Reference the SAF ptitude Analyst Configuration Tool chapter for detailed instructions on how to run and configure the Transaction Server If you will be running an IMx system launch the Multilog IMx Configurator to set the network configuration and identification for the IMx devices Reference the SKF Multilog Mx Configurator User Manual for details Install any additional applications e g Thin Client Transfer you have purchased that were not already installed with SKF ptitude Analyst Refer to the A Note about Installation CDs section above for details on what is and is not installed with SKF ptitude An
90. s as the party may designate by providing notice The notice shall be deemed delivered four 4 days after the notice s deposit in the mail if such notice has been sent by registered mail CHOICE OF LAW This Agreement including all Exhibits 16 including its formation execution interpretation and performance and the rights and obligations of the Parties hereunder shall be governed by and construed in accordance with the laws of the Commonwealth of Pennsylvania without regard to any conflicts of law or choice of law principles thereof CONSENT TO JURISDICTION In the event that either party initiates litigation relating to or arising out of this Agreement Licensor and Licensee irrevocably submit to the exclusive jurisdiction of the state or federal court in or for Philadelphia Pennsylvania for the purposes of any suit action or other proceeding relating to arising out of this Agreement or any transaction contemplated hereby or thereby Legal Proceedings Licensee further agree that service of any process summons notice or document by U S registered mail to such Party s respective address shall be effective service of process for any Legal Proceeding Licensor and Licensee irrevocably and unconditionally waive any objection to personal jurisdiction and or the laying of venue of any Legal Proceeding in the state or federal court in or for Philadelphia Pennsylvania and hereby further irrevocably and unc
91. secrets laws of the United States or any other nation including all rights associated with the protection of computer programs and or source code Person The term Person shall mean an individual a partnership a company a corporation an association a joint stock company a trust a joint venture an unincorporated organization or a governmental entity or any department agency or political subdivision thereof Software The term Software shall mean the software application entitled Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family suite which is an application developed owned marketed and licensed by Licensor The term Software shall include the object code of Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other object code within the SKF ptitude family suite and any and all user manuals or other technical documentation authored by Licensor in connection with Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family The term Software includes any corrections bug fixes enhancements releases updates upgrades
92. sing Start Control Panel Add or Remove Programs or Start Control Panel Programs and Features in Windows 7 gt If the install program does not run automatically double click the Autorun exe file on the installation DVD to manually launch the install program e Select the appropriate language from the displayed menu or select Other Languages to view additional language options The Install Applications or View Manuals menu launches with options to view the manuals or install applications 1 14 SKF ptitude Analyst Installation Manual Installation Installing Prerequisite Applications gt If you would like to view and or print any of the installation or user manuals select the appropriate link User manuals are also available from the Windows Start menu after the product has been installed Adobe Reader version 7 0 or newer is required and must be installed to view and print the installation manual and the user manuals Download Adobe Acrobat Reader from the Adobe website Installing Prerequisite Applications The following programs must be installed before you can run the SKF ptitude Analyst installation Windows Installer Net Framework V3 5 and V4 0 Windows PowerShell gt If you do not install these programs you will not be able to run the SKF ptitude Analyst installation gt These programs may already be installed on your system e From the Install Applications or View Manuals menu click P
93. steps to migrate prior version data to Microsoft SQL Server 2008 Express Edition or Standard Edition from an Oracle database 1 Prior to installing SKF ptitude Analyst open your SKF software application Machine Suite Machine Analyst Machine Observer or Machine Inspector and select the File menu s Export Analyst Data option Use the Export Analyst Data wizard to create a MAB file that contains your Analyst data WARNING This option only exports hierarchy setup and historical data Report settings filters and user preferences will need to be recreated in the new installation WARNING You must export your data from the previous version of the software prior to running the SKF ptitude Analyst installation Although the prior version data will still exist in your Oracle database assuming you do not uninstall Oracle you will not be able to access the older database from within SKF ptitude Analyst to perform the export after upgrade If this should occur contact Technical Support for assistance 2 During SKF ptitude Analyst installation select the option to install the Microsoft SQL 2008 Express Database Manager SKF ptitude Analyst 1 11 Installation Manual Installation Upgrading an Existing Version of the Software OR Purchase Microsoft SQL Server 2008 Standard Edition from Microsoft and work with your database administrator to install the database manager prior to running the SKF ptitude Analyst
94. t 2 10 database manager 1 4 1 17 database demo 2 3 demo database 2 3 E email list 2 21 2 24 2 27 F file location 1 23 G general configuration 2 13 SKF ptitude Analyst Installation Manual H HMI configuration 2 14 host Transaction Server 2 15 IMx service 2 20 adding 2 20 deactivate 2 22 editing 2 22 remove 2 22 installation 1 14 copy files 1 25 DVD 1 14 file location 1 23 maintenance 4 1 menu 1 20 3 2 modify remove or repair 4 1 readme 1 25 Thin Client Transfer 3 2 L License Agreement 1 23 license key expiration A 4 obtaining A 3 sharing A 5 upgrade A 4 License Key Manager 1 23 2 19 import key file A 6 switch key file A 6 maintenance 4 1 Microlog Inspector service 2 23 Microlog service 2 23 adding 2 23 deactivate 2 25 editing 2 24 remove 2 25 Microsoft NET Framework 1 22 Index 1 Microsoft SQL Server See SQL Server See SQL Server monitor recovery configuration 2 17 N network considerations 1 6 O Oracle migrating data 1 11 password 2 7 supported versions 1 4 1 17 upgrade 1 11 R readme 1 25 remove installation 4 1 run SQL script 2 12 S SMTP settings 2 21 2 24 2 28 2 29 SQL Server migrating data 1 11 password 2 8 supported versions 1 4 1 17 upgrade 1 11 supported databases 1 4 1 17 T technical support 1 4 Thin Client Transfer 3 2 configuration 2 18 Transaction Server considerations 1 6 transaction service configuration 2 15 U uninstal
95. tabase Run SQL Script l SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Name Port Connection Title Hostname Add Edi Properties Name defaut 090900 Port Host soGcsoe56 Connection title emlocal E IV Send emails when service lost database connection Email list Start Stop Test Save Undo Localhost IP address 152 157 180 145 z e Figure 24 The SKF ptitude IMx Service Configuration Dialog This dialog allows you to add one or more IMx Services to the SKF ptitude Analyst system each IMx Service appears on a row in the dialog s table An IMx Service is necessary to enable communication between SKF Multilog IMx on line monitoring devices and an SKF ptitude Analyst database storing IMx data gt To establish communications between the IMx Service and the IMx devices you must first set each IMx device s network configuration and identification using the SKF Multilog IMx Configurator For communication speed purposes it is preferable to add the IMx Service to the computer storing the SKF ptitude Analyst database Each IMx Service is able to facilita
96. tails e On the main Installation menu select SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Analyst Human Machine Interface The installation files are extracted and the Installation Setup notes page appears The Installation Setup Notes Page e Prior to proceeding with the installation carefully review the information on this screen SKF ptitude Analyst requires Microsoft NET Framework versions 3 5 and 4 0 If not already installed refer to the Planning the Installation section for details on installing Net Framework Each version installs separately gt Depending on your operating system the NET framework requires anywhere from 280 MB to 610 MB of disk space when installed The SKF ptitude Analyst installation program requires the Windows 4 5 installer If it is not already installed refer to the Planning the Installation section for details on installing the Windows Installer If you are only installing an application client make sure you have the host database location and log on name and password available You must be an administrator on the computer to proceed with the installation If you are upgrading from a prior version of the software ensure you have a full backup before proceeding You must have Adobe Reader version 7 0 or higher to view the user manuals e If you have satisfied all of the stated requirements click Yes to proceed with the installation If you have not satisfied the req
97. talled add on applications gt You must first stop and deactivate all SKF ptitude IMx WMx Microlog Inspector services associated with this installation before you can uninstall SKF ptitude Analyst Reference the appropriate SKF ptitude service sections in Chapter 2 SKF ptitude Analyst Configuration Tool for details gt Uninstall does not remove the ptitude Analyst License Key Manager the ptitude Home application the Microsoft NET 3 5 4 0 framework or the database The Setup Status page displays progress of the uninstall When the uninstall is complete the Uninstall Complete page displays gt Depending on your configuration you may be asked to reboot after uninstalling e Click Finish to close the wizard and return to the installation menu SKF ptitude Analyst 4 1 Installation Manual Appendix A SKF ptitude Analyst License Key Manager Overview Fortine anatrt torme xev ttanaoer TE Fie Hep Erter each of the icense keys provided wth you purchase Now Loense Kay Figure 31 The SKF ptitude Analyst License Key Manager Program SKF ptitude Analyst uses license keys to e scale the application s features scope e enable concurrent use of the total number of licenses acquired by the end user e store the application instance serial number e view the application s expiration time where applicable Upon startup the SKF ptitude Analyst core application determines the specific functionality t
98. tarts either Automatic recommended To direct the recovery service to automatically restart upon machine restart Manual To specify that the recovery service is to be manually started using the Status area s Start button or manually stopped with the Stop button in the event you are not running Monitor on the computer SKF ptitude Analyst 2 17 Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Thin Client Transfer Disabled To disable the recovery service from restarting after the computer is restarted The recovery service will not restart unless either Automatic or Manual are selected and applied e After specifying the recovery service s Startup Type press the Apply button to save the new Startup Type or the Cancel button to cancel the change gt Use the Register button to re register the recovery service if it has been unregistered SKF ptitude Thin Client Transfer wa SKF ptitude Analyst Configuration Tool SKF ptitude Analyst Thin Client Transfer Configuration File Help Thin Client Transfer Settings E Database Database Type Please press the Test Connection button to test Thin Client Transfer Change Database User Management Update Database Transaction Server host localhost Run SQL Script Transaction Server port e088 El SKF ptitude Analyst Configuration Tool General Configuration Cancel Test Connection Save SKF
99. te communication between one SKF ptitude Analyst database and up to 255 IMx devices Therefore if you utilize more than one SKF ptitude Analyst database or more than 255 IMx devices you must configure multiple IMx Services You may add multiple IMx Services on the same computer and also on multiple computers on an SKF ptitude Analyst network depending on your needs gt If you utilize less than 255 IMx devices and only one SKF ptitude Analyst database you may still prefer to configure multiple IMx Services to facilitate faster communications To add a new IMx Service e On the computer on which you wish to add the new IMx Service select the Configuration Tool s SKF ptitude IMx Service option The IMx Service Configuration dialog appears e Select the dialog s Add button then use fields in the dialog s Properties area to configure the new IMx Service SKF Optitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude IMx Service gt If no database connections yet exist the Manage Connections dialog automatically appears allowing you to add a database connection Reference the Database Connections section later in this section for more detail Name Enter a unique name to identify the IMx Service alphanumeric and underscore characters only Port Enter the computer s TCP Port used for the communication with the IMx devices Each IMx Service must have a unique Port number Mak
100. ted in violation of this Section 4 b shall be void ab initio and of no force or effect 5 MAINTENANCE AND SUPPORT Licensor may provide you with support services related to the Software called Product Support Plan PSP services Use of PSP is governed by the policies and programs described in the PSP literature or other material from Licensor s Product Support Department hereinafter referred to as the PSP Policies that may be updated by Licensor from time to time If you select and pay for PSP the PSP Policies shall be specifically incorporated into this Agreement by this reference Licensee acknowledges that Licensor may use any technical information provided by Licensee in the course of receiving PSP services for Licensor s business purposes including for product support and development Licensor will not utilize such technical information in a manner that identifies Licensee CONFIDENTIAL INFORMATION Licensee agrees that the Software contains proprietary information including trade secrets Know how and confidential information hereinafter referred to collectively as the Confidential Information that is the exclusive property of Licensor During the period this Agreement is in effect and at all times after its termination Licensee and its employees and agents shall maintain the confidentiality of the Confidential Information and shall not sell license publish display distribute disclose or ot
101. ter time This operation is needed if you decide to move the WMx Service to another computer e Inthe table select the WMx Service to deactivate and press the Deactivate button The selected WMx Service is deactivated but not removed from the WMx Services table gt Any WMx devices that were configured to communicate with this WMx Service will no longer have their data saved in the SKF ptitude Analyst database The deactivated WMx Service still appears in the table but when selected the Deactivate button changes to an Activate button indicating the WMx Service is not currently operating Press the Activate button to resume the WMx Service s communication operations 2 28 SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SMTP Settings To remove a WMx Service e Inthe table select the WMx Service to remove and press the Remove button The selected WMx Service is deactivated and removed from the WMx Services table gt Any WMx devices that were configured to communicate with this WMx Service will no longer have their data saved in the SKF ptitude Analyst database SMTP Settings ptitude Analyst Configuration Tool ettin i A SkF ptitude Analyst Config ion Tool SMTP Settings 5x File Help g Database SMTP Settings Database Type Name test Change Database Server address smtp gmail com User Management Pott 587 Update Database Run SOL Script From
102. terms and conditions of this Section 2 are material and that failure of Licensee to comply with these terms and conditions shall constitute sufficient cause for Licensor to terminate this Agreement and the license granted hereunder immediately and without an opportunity to cure This subsection 2 j shall not be construed to preclude or in any way effect a finding of materiality with respect to any other provision of this Agreement 3 LICENSE FEE The applicable licensee fees will be set forth in the quote issued to Licensee by Licensor or otherwise established in the applicable purchase order or other ordering documents memorializing your license acquisition 4 OWNERSHIP a b Title Licensee understands and agrees that Licensor owns all Intellectual Property Rights related to the Software including custom modifications to the Software whether made by Licensor or any third party Licensee agrees that this Agreement effects a license not a sale of the Software and that the first sale doctrine as codified in 17 U S C 109 does not apply to the transaction effected by this Agreement Transfers Under no circumstances shall Licensee sell license sublicense publish display distribute assign or otherwise transfer hereinafter referred to collectively as a Transfer to a third party the Software or any copy thereof in whole or in part without Licensor s prior written consent Any Transfer effec
103. the Database Type option The Database Type Configuration dialog displays R SKF ptitude Analyst Configuration Tool Database Type Configuration Change Database Database Type Connections cra_skfuset User Management Update Database Run SOL Scrpt pttude Analyst Contiguratan Toot Connection tile General Configuration SKF ptitude HM Connection SKF ptitude Transaction Service Di cared name SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Chert Transte SKF ptitude Analyst Leense Key Manager a ee ee eee SKF ptitude Home Tetd8 Setactive Help SKF ptitude IMx Service SKF Gptitude Micralog Service SKF ptitude WMx Service SMTP Settings Figure 11 The Oracle Database Type Configuration Dialog SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool Database Type For default installations the Connections and Connection Title fields display ora_skfuser e Press the Set active button to set the ora skfuser database type A confirmation prompt appears To import the Oracle Demo database e Inthe Configuration Tool s left pane under Database select the Change Database option The Database Import Attach Configuration dialog displays e Press the Import button to import the Oracle Demo database A file Open dialog appears e Browse to the ptitude Analyst DVD drive DB_INST 11g folder and select the p4demodb dmp file then press the Open button A dialog then
104. tions identify specific SKF ptitude Analyst databases Select an existing database connection to be used by the Microlog Service from the drop down list gt If you do not have existing database connections reference the Database Connections section later in this section for more detail Email List If the service loses connection to the database and you wish to automatically receive an email notification about the loss of connection enable the Send emails when service loses database connection check box Click the Email list button to enter email addresses to which the Microlog Service will send notifications Type in the email accounts of the recipient OK Cancel Help Figure 27 The Email List Dialog gt Each email address must be separated by either a comma or semicolon gt Before the email recipients can receive these notifications you must first configure the SMTP settings Reference the SMTP Settings section later in this chapter When finished press the Save button to save the new Microlog Service configuration the new Microlog Service appears in the table and the new Microlog Service initiates or press the Undo button to cancel the changes To edit an existing Microlog Service Select the Microlog Service to edit from the table and press the Edit button then edit the Microlog Service properties as described above When finished press the Save button to save any changes confirmation prompts appear
105. titude Analyst database storing WMx data gt To establish communications between the WMx Service and the WMx devices you must first set each WMx device s network configuration and identification using the SKF Wireless Configuration Utility Reference the SKF Multilog On Line System WMx User Manual for details For communication speed purposes it is preferable to add the WMx Service to the computer storing the SKF ptitude Analyst database Each WMx Service is able to facilitate communication between one SKF ptitude Analyst database and up to one or more WMx devices You may add multiple WMx Services on multiple computers on an SKF ptitude Analyst network depending on your needs gt You can configure multiple WMx Services to facilitate faster communications SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude WMx Service To add a new WMx Service e On the computer on which you wish to add the new WMx Service select the Configuration Tool s SKF ptitude WMx Service option The WMx Service Configuration dialog appears gt When you first open the SKF WMx Service Configuration dialog a message displays prompting existing WMx users to import their Wireless DB Builder database into ptitude Analyst using the WMx Conversion Utility To launch the conversion utility locate filename skfWMxConversionUtility exe in C Program Files SKF RS ptitude Analyst and double click it Refere
106. ttings oe etn f Value data The General Configuration Dialog On the right side of the screen the SKF ptitude Master Settings list displays configuration settings you are able to modify SKF ptitude Analyst 2 13 Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude HMI Connection To modify SKF ptitude Analyst settings e Inthe SKF ptitude Master Settings list single click to select the item you wish to modify The selected item displays in the Value name field read only and the selected item s current value displays in the Value data field e Edit the Value data field as necessary and click Save You may need to restart SKF ptitude Analyst and any services for your changes to take affect SKF ptitude HMI Connection This option allows HMI if installed on the computer to use the connection service to support HMI s live data feature gt HMI must be activated with a license key prior to setting the connection service skr ptitude Analyst Configuration Tool SKF ptitude HMI Connection Configuration d oj x File Help E Database Database Type Change Database User Management Update Database Run SOL Script SKF ptitude Home SKF ptitude IMx Service SKF ptitude WMx Service SMTP Settings E SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection Start Stop SKF ptitude Transactio
107. tude Analyst database SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude WMx Service SKF ptitude WMx Service A skr ptitude Analyst Configuration Tool SKF ptitude WMx Service Configuration File Help Database Database Type Change Database User Management Update Database Run SQL Script SKF ptitude Analyst Configuration Tool General Configuration SKF ptitude HMI Connection SKF ptitude Transaction Service SKF ptitude Monitor Recovery SKF ptitude Analyst Thin Client Transfer SKF ptitude Analyst License Key Manager SKF ptitude Home SKF ptitude IMx Service SKF ptitude Microlog Service SKF ptitude WMx Service SMTP Settings Name default Servic 8000 Interna 8001 Connection Title sql_skfuser Hostname SKF B14D Properties Name Service port Internal port Connection title default s000 8001 sql_skfuser be Email Send emails when service lost database connection Localhost IP address Figure 28 192 168 0 153 Save Lindo v The SKF ptitude WMx Service Configuration Dialog This dialog allows you to add one or more WMx Services to the SKF ptitude Analyst system each WMx Service appears on a row in the dialog s table A WMx Service is necessary to enable communication between SKF Multilog WMx on line monitoring devices and an SKF p
108. turn Authorization Product Calibration or a Product Support Plan use the web page links for direct contact and support Product Sales For information on purchasing condition monitoring products services or customer support contact your local SKF sales office General Product Information For general product information i e product data sheet accessories catalog etc visit the Condition Monitoring Products page on SKF com and select the appropriate product link Technical Support Group Discuss review issues of specific interest with maintenance and reliability specialists from around the world at the SKF Knowledge Centre For technical support on issues like troubleshooting product installation troubleshooting product performance etc use our technical support web page to contact one of our Technical Support Groups Product Registration Please take a moment to register your product at www skf com cm register to receive exclusive benefits offered only to our registered customers including receiving technical support tracking your proof of ownership and staying informed about upgrades and special offers Please visit our website for more details on these benefits Tell us how we re doing It s important that you re satisfied with the quality of our product user manuals We appreciate your feedback if you have comments or suggestions for improvement please tell us how we re doing 081313js End
109. ude Analyst database storing Microlog Inspector data For communication speed purposes it is preferable to add the Microlog Service to the computer storing the SKF ptitude Analyst database You may add multiple Microlog Services on the same computer and also on multiple computers on an SKF ptitude Analyst network depending on your needs To add a new Microlog Service e On the computer on which you wish to add the new Microlog Service select the Configuration Tool s SKF ptitude Microlog Service option The Microlog Service Configuration dialog appears e Select the dialog s Add button then use fields in the dialog s Properties area to configure the new Microlog Service gt If no database connections yet exist the Manage Connections dialog automatically appears allowing you to add a database connection Reference the Database Connections section later in this section for more detail SKF ptitude Analyst 2 23 Installation Manual SKF ptitude Analyst Configuration Tool SKF ptitude Microlog Service Name Enter a unique name to identify the Microlog Service alphanumeric and underscore characters only Port Enter the computer s TCP Port used for the communication with the Microlog Inspector devices Each Microlog Service must have a unique Port number Make sure your firewall software does not block this port Hostname Read only displays the computer s host name Connection title Database connec
110. ude WMx Service SMTP Settings Figure 10 The SQL Server Database Type Configuration Dialog For default installations the Connections and Connection Title fields display sql_skfuser e Press the Set active button to set the sql_skfuser database type A confirmation prompt appears SKF ptitude Analyst 2 3 Installation Manual SKF ptitude Analyst Configuration Tool Database Type To attach the SQL Server Demo database e In the Configuration Tool s left pane under Database select the Change Database option The Database Import Attach Configuration dialog displays e Press the Attach Switch button to attach the SQL Server Demo database A file Open dialog displays e Browse to select the skfuser mdf file previously stored in the SQL Server default location Drive Program Files Microsoft SQL Server MSSQL10_50 MSSQLSERVER MSSQL DATA then press the Open button A dialog then prompts you for the SA password e Enter the default password skf lower case You are prompted to wait and then an attach database success prompt appears Press OK You must now perform the Update DB option reference the Update Database section later in this chapter Oracle Demo Database The general steps for acquiring and using the Oracle Demo database are e Set the database type to Oracle e Import the file To set the database type to Oracle e Launch the SKF ptitude Analyst Configuration Tool Under Database select
111. uirements click No to cancel the installation If you select to proceed with the installation the installer checks to ensure that all required components are installed If any components are missing a message displays informing you that you need to install the missing components and then retry installing SKF ptitude Analyst SKF ptitude Analyst Installation Manual Installation Installing the SKF ptitude Analyst Applications When all required components are installed the Welcome screen displays e Click Next to continue to the End User License Agreement page The End User License Agreement Page e Carefully read the license agreement If you do not agree with the terms of the license agreement click Cancel to abort the installation If you agree with the terms select accept the terms of the license agreement and click Next to proceed to the Choose Destination Location page The Choose Destination Location Page The default destination location displays gt If Thin Client Transfer is already installed on this computer the previously selected destination location is automatically used and this page does not appear e Accept the default location recommended or use the Browse button to select a new location and click the Next command button The SKF ptitude Analyst License Key Manager page displays with information concerning the License Key Manager program The License Key Manager LKM e Read the infor
112. uter hosting the Transaction Server referenced by Thin Client Transfer as specified during the Thin Client Transfer installation procedure Installing SKF ptitude Analyst Thin Client Transfer SMTP Settings gt By default license key files are stored on the local computer If you would like to place a copy of the license key file on the network where it can be shared by multiple installations use the File Use File menu option in the License Key Manager at each SKF ptitude Analyst installation gt If the Thin Client Transfer license key was entered during installation of the Transaction Server host no further action is required If it was not already entered you may enter the key at any time using the License Key Manager Installing Thin Client Transfer To launch the Thin Client Transfer install program e Verify that your computer meets the minimum system requirements then insert the Application DVD into your CD drive The install program automatically launches gt If the install program does not run automatically double click the Autorun exe file on the installation DVD to manually launch the install program e Select the appropriate language from the displayed menu A second menu launches with options to view the manuals or install applications e Select SKF ptitude Applications The Product Installation Menu launches e Select SKF ptitude Analyst Thin Client transfer The installation files are extracted and the
113. ver SKF Microlog Inspector CMDM 6600 SKF Microlog Inspector CMDM 6700 SKF MARLIN CMDM 5460 Operating under Windows Mobile 2005 SKF MARLIN CMDM 6200 SKF MARLIN CMDM 6400 MARLIN CMDM 6500 Legacy On Line Systems Multilog W VT Multilog LMU Multilog CMU and TMU 2 0 Recommended to operate under Windows XP or Windows7 32 bit Installation Order Use the following order when installing on multiple computers 1 Perform the installation on the database server computer installing or connecting to the appropriate database 2 Perform the installation on the computer that will act as the Transaction Server 3 Perform the remaining client installations connecting to the database server and Transaction Server host gt Install additional applications i e SKF ptitude Decision Support DMx Manager etc on each computer after the SKF ptitude Analyst software has been installed SKF ptitude Analyst 1 9 Installation Manual Installation Upgrading an Existing Version of the Software Upgrading an Existing Version of the Software gt This information applies to prior versions of SKF ptitude Analyst ptitude Inspector Machine Suite Machine Analyst Machine Inspector and Machine Observer Important Ensure you have a full backup of the database before proceeding with the upgrade If you are upgrading from a prior version of the software you have two options regarding your exist
114. y its Db connect name and type Database connections are configured and given a Connection title for identification purposes when configuring your IMx and Microlog Services You must configure a database connection for each SKF ptitude Analyst database with which you wish to communicate To manage SKF ptitude Analyst database connections e Press the Database Type IMx Service Configuration or Microlog Service Configuration dialog s Manage button The Manage Connections dialog appears Manoge omens a This dialog will allow you to manage your database connections For a service to be properly configured and to run the database connection must be configured Connections sai skfuser sai skfuser USSDGCND130CMXQ SGLEXPRESS Add Edit Remove Close Help Figure 13 The Manage Connections Dialog In the Manage Connections dialog the Connections drop down list displays existing SKF ptitude Analyst database connections e Use your mouse to select a database connection from the list its setup parameters display in following fields e Use the dialog s buttons to manage your database connections 2 6 SKF ptitude Analyst Installation Manual SKF ptitude Analyst Configuration Tool Database Type Add Add a new database connection Press the Add button the configuration fields become available Specify the new database connection s Connection title Enter a unique name to identify the database

SKF @ptitude Analyst Installation Manual

Contents

Download Pdf Manuals

Related Search

Related Contents