CP5-Series User Manual
Contents
1. e Avoid dropping your scale The warranty does not cover damage due to rough treatment or overload e Check the batteries first if you are having any trouble with your scale This simple step can remedy most scale issues l Part List 1 Scale 2 CR2032 Battery ll Display Overview Low Battery Indicator NE NE Negative Weight D D Indicator Weight Value Tare Indicator ARE l f j j en er a 5 lll Key Description Weighing Unit gt re N R 3 ils Max 5kg x 1g Max 111b x 0 10z 1 Unit Key Changes the displayed unit of measure 2 ON OFF Tare Key Tap to turn on or re zero the scale if already on Hold to turn the scale off IV Battery Installation 1 Before using the scale for the first time check the battery compartment and remove any plastic insulation strips or packaging that may be in place to prevent battery drainage during shipping storage 2 If you are replacing the batteries make sure the positive side faces out Ca V Scale Operation 1 Place the scale on a flat level surface 2 Tap the b key to turn the scale on 3 Once the scale displays zero you are ready to weigh 4 Place items to be weighed on the center of the scale platform 5 When you are finished weighing you can turn the scale off by holding the b key for 2 seconds VI Using the Tare Feature You can use this scale s tare feature to subtract the we2. User Manual EDGE 5K 5000g x 1g Copyright 2012 American Weigh Scales Inc K All rights reserved Rev 2 0 Thank you for purchasing the American Weigh EDGE 5K digital kitchen scale Please read all operating instructions carefully before use Scales are precision measuring devices and should always be handled with proper care To ensure years of reliable service keep these simple tips in mind e Do not exceed the scale s maximum capacity This scale has integrated overload protection but any overload protection has its limits e Avoid weighing in extreme heat or cold Scales perform best at normal room temperature e This scale has been calibrated at the factory Only advanced users should attempt recalibration using the specified calibration masses e Store your scale in a clean dry location Dust dirt and moisture can accumulate on the weighing sensors and electronics causing inaccuracy or malfunction e Keep the area around and under the scale clean Loose debris under the scale can push against the base causing inaccuracy e Avoid using your scale in close proximity to strong radio wave emitting devices such as cordless phones e Always weigh on a flat and level surface free from vibrations and drafts The corner of a room is usually the most stable e Gently apply all items to be weighed Do not drop items onto the weighing platform Overload protection does not protect the sensor from shock loading
3. ight of an empty container or vessel to weigh only the contents NOTE The weight of the container will subtract from the available capacity 1 Place the empty container or vessel on the weighing platform 2 Press the b key once The display will then reset to zero If the container is removed its weight will be displayed as a negative number 3 You may now fill the container with the quantity to be weighed The display will show just the weight of the contents 4 To return to normal weight display gross weight remove any items from the weighing platform and press the 6 5 key again to re zero the scale Vil dis 2 VIII Changing the Unit of Measure Press the UNIT key to change the scale s displayed unit of measure If the scale is turned off then back on it will default to the last unit used EDGE 5K Units g gram Ib oz pound ounce ml milliliter fl oz fluid ounce US Calibration Adjustment Advanced Users Only Calibration is performed at the factory Only advanced users should attempt calibration if the scale is not weighing properly 1 2 Turn the scale on and wait for zero to be displayed Tap the O key four times holding the key on the last tap random number will be displayed With no weight on the scale tap the b key again to set the zero point After a couple of seconds the display will show ZERO followed by 0000 2 Place a 2000g calibrati
4. on weight on the center of the platform After a couple of seconds the display will show CAL1 followed by another random number ISN Now place a total of 5000g on the center of the scale platform The display will show CAL2 then 5000g Calibration is complete IX Error Codes 1 A Symbol Batteries are low Replace the batteries 2 EEEE Maximum capacity exceeded This scale cannot be used to give measurements over 111bs 5kg X Specifications EDGE 5K Max Capacity 5000g 5000ml 169fl oz 111b Readability 1g 1ml 0 1fl oz 0 10z Calibration Weights 2000g 5000g not included 1 x CR2032 Lithium Battery included Auto Off Time 180 Seconds of Non Use Dimensions 9 2 x 5 4 x 0 5 Display Size 1 0 x 2 3 Warranty 10 Year Limited Warranty American Weigh Scales Inc Norcross GA 30092 U S A Made in China to our exact specifications and quality control
Download Pdf Manuals
Related Search