Home

Toshiba U940 - Vandenborre

1. Click m Tap the euch Pad or click the left Touch Pad controfpitton once Left click the use once E Tap the touch sc ben once only for touch screen models QO Right click H Click the right Touch P amp d gontrol button once Right click the mouse once an E Press and hold on the touch spo for touch screen models Double click E Tap the Touch Pad or click the left rai Pad control button twice YW Left click the mouse twice Q E Tap the touch screen twice only for touch screen models Charm By swiping in from the right edge only for touch screen models or pointing the mouse pointer to the lower right or upper right corner of your screen you will find a list of charms Search Share Start Devices and Settings Desktop Click the Desktop tile from the Start screen to access the desktop Start screen You can go to the Start screen by clicking the Start charm You can also use the Windows logo key H on your keyboard to go to Start screen For detailed information please refer to the Windows Help and Support Using your product for the first time 7 Be sure to read the enclosed Instruction Manual for Safety and Comfort for J information on the safe and proper use of this computer It is intended to help you be more comfortable and productive while using a notebook computer By following the recommendations in it you may reduce your chance of developing a painful or disabling injury to your hand
2. User s Manual 4 14 ws a Use a point size 0 Phillips screwdriver to remove and fasten the screws J the use of an incorrect screwdriver can damage the screw heads oO Installing a memory module W To install a memory module follow the steps as detailed bplow 1 Click Power in the Settings charm and then click Shulfdpwn while holding down the SHIFT key ensure that the Power indi ris off 2 Remove the AC adaptor and all cables and peripherals con d to the computer K9 oA Close the display panel O 4 Turn the computer upside down and remove the battery pack te Qa Replacing the battery pack section if required Gs 5 Loosen the screw securing the memory module cover in place please note that the screw is attached to the cover in order to prevent it from being lost 6 Slide your fingernail or a thin object under the cover and lift it off Figure 4 7 Removing the memory module cover 1 Memory module cover 2 Screw Product appearance depends on the model you purchased User s Manual 4 15 O 7 Align the notch of the memory ny with that of the memory slot and gently insert the module into th Blot at about a 30 degree angle before holding it down until the latches feither side snap into place Figure 4 8 Seating the mery module Cr 1 Notch 2 Slot Product appearance depends on the model you purchased A m Never allow metal objects such
3. protected area you will need to obtain an appropriate application that On applies the copy protection system Media care Observe the following precautions when handling the card H Do not twist or bend cards Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid Do not touch the metal part of a card or expose it to liquids or let it get dirty m After using card return it to its case m The card is designed so that it can be inserted only one way Do not try to force the card into the slot E Do not leave a card partially inserted in the slot Press the card until you hear it click into place H Set the write protect switch to the lock position if you do not want to record data E Memory cards have a limited lifespan so it is important to backup important data Do not write to a card if the battery power is low Low power could affect writing accuracy Do not remove a card while read write is in progress For more details on using memory cards see manuals accompanying the cards About the write protect The memory media cards have a function for protect m SD Card SD memory card SDHC memory card and SDXC memory card 4 20 User s Manual O L Set the write protect switch to the lock position if you do not want to record data Inserting a memory media W The following instructions apply to all types of supportedipedia devices To insert a memory me
4. arms shoulders or neck This section provides basic information to start using your computer It covers the following topics H Connecting the AC adaptor Opening the display Turning on the power Initial setup Getting to know the Start screen User s Manual 2 2 ee O_o Connecting the AC adaptor ae User s Manual O i Use a virus check program and make sure it is updated regularly Never format storage media without checking its content formatting destroys all stored data E tis a good idea to periodically back up the internal Hard Disk Drive or other main storage device to external media General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss amp Before you install a device or application save any data in memory to the Hard Disk Drive or other storage media Failure to do so may result in the loss of data Attach the AC adaptor when you need to charge the battery or you want to operate from AC power It is also the fastest way to get started because the battery pack will need to be charged before you can operate from battery power The AC adaptor can automatically adjust to any voltage ranging from 100 to 240 volts and to a frequency of either 50 or 60 hertz enabling you to use this computer in almost any country region The adaptor converts AC power to DC power and reduces the voltage supplied to this computer m Always use the TOSHIBA
5. http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com Thi
6. you cannot copy or playback protected material on another computer or other device and you may not reproduce any copyrighted material except for your personal enjoyment Below is a simple explanation for distinguishing SD memory cards from SDHC and SDXC memory cards E SD SDHC and SDXC memory cards appear the same externally However the logo on memory cards is different so pay careful attention to the logo when purchasing P The SD memory card logo is S2 m The SDHC memory card logo is gt The SDXC memory card logo is 2 E The maximum capacity of SD memory cards is 2GB The maximum capacity of SDHC memory cards is 32GB The maximum capacity of SDXC memory cards is 64GB Card Type Capacities SD 8MB 16MB 32MB 64MB 128MB 256MB 512MB 1GB 2GB SDHC 4GB 8GB 16GB 32GB User s Manual 4 19 ee T T User s Manual O L SDXC 64GB yy e Q New media cards are formatted according to speis standards If you wish to reformat a media card be sure to do so with a devide that uses media cards Le Lh Formatting a memory media card 4 Memory media format Memory media cards are sold already formatted in conformity gspecific standards If you reformat a memory card be sure to reformat it a device such as digital camera or digital audio player that uses the pory cards not with the format command provided within Windows Op Should you need to format all areas of the memory card including the
7. PROVIDE SUCH VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM OpenSSL Toolkit License Issues User s Manual LICENSE ISSUES The OpenSSL toolkit stays under a dual license i e both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit See below for the actual license texts Actually both licenses are BSD style Open Source licenses In case of any license issues related to OpenSSL please contact openssl core openssl org OpenSSL License Pe ge ence ee est e a a Copyright c 1998 2011 The OpenSSL Proje t All rights reserved Redistribution and use in source and binary form ith or without modification are permitted provided that the followin conditions are met 1 Redistributions of source code must retain the abot ypopyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in documentation and or other materials provided with the distri n 3 All advertising materials mentioning features or use of this softw O must display the following acknowledgment Cp This product includes software developed by the OpenSSL Project ore use in the OpenSSL Toolkit
8. Q wireless devices like for example mobile phones Wireless Devices and your health Because Wireless products operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Wireless products is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Wireless products may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include m Using the Wireless products equipment on board of airplanes or E In any other environment where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the Wireless device prior to turning on the equipment Radio Regulatory Information The Wireless device is must be installed and used in strict accordance with the manufacturer s instructions as described in the user documentation that comes with the product This product complies with the following radio frequency and safety standards User s Manual 1 14 py Euro
9. The operation of the computer will not be impaired in any way but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use User s Manual 1 12 ee Go a Instruction Manual for Safety apd Comfort All important information on the safe and pre of this computer is described in the enclosed Instruction Manual afety and Comfort Be sure to read it before using the computer Cr Information for Wireless Devices Ly Wireless LAN Interoperability 4 72 The Wireless LAN is compatible with other LAN systems Direct 8 ence Spread Spectrum DSSS Orthogonal Frequency Division Mutipisog OFDM radio technology and is compliant to E The IEEE 802 11 Standard on Wireless LANs Revision a b g n or bre n as defined and approved by the Institute of Electrical and cA Electronics Engineers Q The Wireless Fidelity Wi Fi certification as defined by the Wi Fi Alliance The Wi Fi CERTIFIED logo is a certification mark of the Wi Fi Alliance Bluetooth wireless technology Interoperability T Bluetooth Cards are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum FHSS radio technology and is compliant to H Bluetooth Specification depending on the model you purchased as defined and approved by the Bluetooth Special Interest Group H Logo certification with Bluetooth wireless technol
10. User s Manual Disposal of products The crossed out wheeled dust bin symbol indicates that ps products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 By participating in separate collection of products and batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please visit our website http eu computers toshiba europe com or contact your local city office or the shop where you purchased the product O Disposal of batteries and or aceymutlators O The crossed out wheeled dakpin symbol indicates that batteries and or accumulators must be collected and disposed of separately from houst Id waste If the battery or accumulator contain amp more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below th esossed out wheeled dust bin symbol Qa By participating in separate collection of batteries your help to assure th
11. and Canada two pin plug configuration must be a 2 15P 250V or 1 15P 125V and three pin plug configuration must be 6 15P 250V or 5 15P 125V as designated in the U S National Electrical code handbook and the Canadian Electrical Code Part II The following illustrations show the plug shapes for the U S A and Canada the United Kingdom Australia Europe and China USA ii UL approved Australia AS approved Canada CSA approved United Kingdom BS approved Europe ki Approved by the appropriate agency China CCC approved Chapter 4 fo Operating Basics Lem This chapter describes the basic operations of your computer Aighlights the precautions that should be taken when using it Uy Q The Keyboard The computer s keyboard layouts are compatible with a 104 105 key K enhanced keyboard by pressing some keys in combination all of the C 104 105 key enhanced keyboard functions can be performed on the computer The number of keys available on your keyboard will depend on which country region your computer is configured for with keyboards being available for numerous languages In use there are different types of keys specifically typewriter keys function keys soft keys and Windows special keys Never remove the key caps on your keyboard Doing so could cause damage to the parts under the key caps Keyboard indicators The following figure sh
12. as screws staples and paper clips to enter the computer Foreign metal objects can create a short circuit which can cause computer damage and fire possibly resulting in serious injury Do not touch the connectors on the memory module or on the computer Debris on the connectors may cause memory access problems 1 E Align the grooves along the edges of the memory module with the J locking tabs on the connector and insert the module into the connector firmly if you find it difficult to install the memory module gently prise the locking tabs outwards using the tip of your finger Please also ensure that you hold the memory module along its left and right hand edges the edges with the grooves in User s Manual 4 16 O 8 Seat the memory module cover inplace and secure it with the screw AN 7 Take care to ensure that the memory module cover is firmly closed Figure 4 9 Seating the memory m cover h Q K 1 Memory module cover 2 Screw Product appearance depends on the model you purchased 9 Install the battery pack refer to Replacing the battery pack section if required 10 Turn your computer over 11 Turn the computer on and make sure the added memory is recognized to confirmed it click Desktop gt Desktop Assist gt Control Panel gt System and Security gt System Removing a memory module To remove the memory module follow the steps as detailed below 1 Clic
13. because the computer needs this time to check the battery s remaining capacity Or and then calculate the remaining operating time based on this together with the current power consumption Please be aware that the actual remaining operating time may differ slightly from the calculated time With repeated discharges and recharges the battery s capacity will gradually decrease In view of this it will be noted that an often used older battery will not operate for as long as a new battery even when both are fully charged Maximizing battery operating time User s Manual A battery s usefulness depends on how long it can supply power on a single charge while how long the charge lasts in a battery depends on Processor speed Screen brightness System Sleep Mode System Hibernation Mode Display power off period Hard Disk Drive power off period How often and for how long you use the Hard Disk Drive and external disk c drives for example optical disc How much charge the battery contained to begin with H How you use optional devices such as a USB device to which the battery supplies power Whether you enable Sleep Mode which can conserve battery power if you are frequently turning the computer off and on m Where you store your programs and data m Whether you close the display panel when you are not using the keyboard closing the display saves power i O E The environmental temperature eo time decr
14. closed T 10 Install the battery pack 11 Turn your computer over Peripheral devices Memory media The computer is equipped with a Memory media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices such as digital cameras and Personal Digital Assistants A Keep foreign objects out of the Memory media slot Never allow metal objects such as screws staples and paper clips to enter the Memory media slot Foreign metal objects can create a short circuit which can cause computer damage and fire possibly resulting in serious injury User s Manual 4 18 eo Please note that an adaptor is required to use miniSD microSD Card le m T Please note that not all memory media have been tested and verified to work correctly Therefore it is not possible to guarantee that all memory media will operate properly E The slot does not support Magic Gate functions E Figure 4 11 Examples of memory media PA C Q lt P S Secure Digital SD microSD card MultiMediaCard MMC Z Card adaptor and microSD i es card Memory media This section provides the important safety precautions in order to handle your memory media Points to note about the memory media card SD SDHC SDXC memory cards comply with SDMI Secure Digital Music Initiative which is a technology adopted to prevent unlawful copy or playback of digital music For this reason
15. configure the computer in order to save battery power This can be specified in the Power Options This feature automatically turns power to the computer off when the display panel is closed and turns it back on when the display panel is opened This can be specified in the Power Options When battery power is exhausted to the point that computer operation cannot be continued the system automatically enters Hibernation Mode and shuts itself down This can be specified in the Power Options To protect against overheating the processor has an internal temperature sensor so that if the computer s internal temperature rises to a certain level the cooling fan is turned on or the processing speed is lowered This can be specified in the Power Options If you have to interrupt your work you can use this feature to allow you to turn off power to the computer without exiting from your software Data is maintained in the computer s main memory so that when you next turn on the power you can continue working right where you left off i O OO by Hibernation Mode This feature ou turn off the power to the computer withoutexiting from your software The contents of main cy are automatically saved to the Hard Disk Brive so that when you next turn the power on agai you can continue working right where you lefteff Refer to the Turning off the power section more details USB Wakeup function This function restores the comput fro
16. herein First edition August 2012 Copyright authority for music movies computer programs databases and other intellectual property covered by copyright laws belongs to the author or to the copyright owner Copyrighted material can be reproduced only for personal use or use within the home Any other use beyond that stipulated above including conversion to digital format alteration transfer of copied material and distribution on a network without the permission of the copyright owner is a violation of copyright or author s rights and is subject to civil damages or criminal action Please comply with copyright laws in making any reproduction from this manual Disclaimer This manual has been validated and reviewed for accuracy The instructions and descriptions it contains are accurate for your computer at the time of this manual s production However succeeding computers and manuals are subject to change without notice TOSHIBA assumes no liability for damages incurred directly or indirectly from errors omissions or discrepancies between the computer and the manual Trademarks Intel Intel SpeedStep Intel Core and Centrino are trademarks or registered trademarks of Intel Corporation Windows Microsoft and Windows logo are registered trademarks of Microsoft Corporation User s Manual 1 1 O O Bluetooth is a trademark owned by its eienctor and used by TOSHIBA under license The terms HDMI and HDMI High Definitio
17. indicator will blink amber If you are operating the computer on battery power you can lengthen the overall operating time by turning it off into Hibernation Mode Sleep Mode will consume more power while the computer is off A by Sleep Mode limitations Y O Sleep Mode will not function under the following conditions E Power is turned back on immediately after tting down E Memory circuits are exposed to static electricity or electrical noise Hibernation Mode Ly The Hibernation Mode feature saves the contents of memo s the Hard Disk Drive when the computer is turned off so that the next ti eit is turned on the previous state is restored Please note that the Hibernati ode feature does not save the status of any peripheral devices connect the computer O Po A T User s Manual m Save your data While entering Hibernation Mode the computer saves 3 the contents of memory to the Hard Disk Drive However for safety Q sake it is best to save your data manually amp Data will be lost if you remove the battery or disconnect the AC adaptor before the save is completed E Do not install or remove a memory module while the computer is in Hibernation Mode Data will be lost amp Do not switch to Hibernation Mode while transferring data to external media such as USB devices memory media or other external memory devices Data will be lost Benefits of Hibernation Mode The Hibernation Mode feature provides the foll
18. options or cables not produced by HIBA are connected or implemented In this case the persons who have nected implemented those options cables have to provide assurance thatthe system PC plus options cables still fulfils the required standards To ave genera EMC problems the following guidance should be noted m Only CE marked options should be connected implement d m Only best shielded cables should be connected W Working environment O gt This product was designed to fulfil the EMC Electromagnetic Compatibilitys requirements to be observed for so called Residential commercial and light industry environments TOSHIBA do not approve the use of this product in working environments other than the above mentioned Residential commercial and light industry environments For example the following environments are not approved E Industrial Environments e g environments where a mains voltage of 380 V three phase is used E Medical Environments E Automotive Environments E Aircraft Environments Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA The consequences of the use of this product in non approved working environments may be Interference with other devices or machines in the near surrounding area Malfunction of or data loss from this product caused by disturbances generated by other devices or mac
19. quickly change the system configuration directly from the keyboard without running a system program This feature automatically cuts off power to the computer s display panel when there is no keyboard input for a specified time with power being restored the next time a key is pressed This can be specified in the Power Options This feature automatically cuts off power to the hard disk drive when it is not accessed for a specified time with power being restored when the hard disk drive is next accessed This can be specified in the Power Options User s Manual O User s Manual System automatic Sleep Hibernation Mode 1 Power on password Intelligent power supply Battery save mode Panel power on off 1 Low battery automatic Hibernation Mode 1 Heat dispersal 1 Sleep Mode O This feature alite see shuts down the system into either Slee or Hibernation Mode when there is no cies r hardware access for a specified time This c Hie specified in the Power Options Two levels of password in supervisor and user are available to prevent unguthorized access to your computer 7 A microprocessor in the computer s inte igent power supply detects the battery s char ai automatically calculates the remaining bat capacity and protects electronic a from abnormal conditions such as a voltage Gi overload from the AC adaptor This can be Oo specified in the Power Options This feature lets you
20. scsseseeseeees Pay A 4 28 Utilities and Advanced Usage KA Utilities and Applications sssesssssssseseeseeeees Zaa AE EEA 5 1 Special features ana ea aaa d aA 5 3 TOSHIBA Password utility cceeee sees neeeeeees Kane duidudeus Ccuaddvourees 5 5 TOSHIBA System Settings cssssssssssssssscsssssssssssssesseee hip pencils 5 7 TOSHIBA Media Player by sMedio TrueLinkt 00t Jiris 5 13 TOSHIBA PC Health Monitor cccccescceseeeeeeeeseeseeeeeseeeeeeeeenees 02 5 14 System Recovery u ccccecccceeeeeeenseeeeneenseseeensnseeeesnseneeeneeeseeeenennsneeenss Cy 43 Ordering Recovery Discs from TOSHIBA cccsscesssneseeenseteeees Troubleshooting 3 Problem solving procesS ssssssssssseenunrnnnnrnnnnennrrnnnnrnnnnnnnnnennnnnnnnnnnnne nnn 6 1 Hardware and system checklist 2 2 ccccesseecceeeeeeeeeceeeeeeeeeeeeeeeeeeees 6 4 TOSHIBA support ssssssssssessennsssnnnrnnnnrnnnnnnnnnennrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ennnen 6 15 Index iv User s Manual Chapter 1 o TOSHIBA Legal Regulat ry and Safety o This chapter states the Legal regulatory and safety information stg to TOSHIBA computers W Copyright Disclaimer and Trademarks 3 Copyright 2012 by TOSHIBA Corporation All rights reserved Under the copyright laws this manual cannot be reproduced in any form without the prior written permission of TOSHIBA No patent liability is assumed with respect to the use of the information contained
21. t register the HDD User Password AN E fyou forget your HDD User Password TOSHIBA will NOT be able to E When saving the HDD User Password shut down or restart the computer If the computer is not shut down or restarted the saved data may not be correctly reflected For more information on shutting down or restarting the computer refer to Turning on the power Supervisor Password If you set a Supervisor Password some functions might be restricted when a user logs on with the User Password To set a Supervisor Password Desktop gt Desktop Assist gt Tools amp Utilities gt Supervisor Password This utility lets you do the following m Register or delete the Supervisor Password E Specify restrictions for general users User s Manual 5 6 ee O Starting the computer by pasdwerd T A A If you have already registered a user passion there is one way to start the computer Q E Enter the password manually Go The password is necessary only if the computer was shut down in Hibernation mode or boot mode not in Sleep mode and Restart E h To enter a password manually follow the steps as detailed bels 1 Turn on the power as described in the Getting Started section he following message will appear in the screen Enter Password er At this point the function keys do not work They will function after you enter the password 2 Enter the Password 3 Press ENTER If you enter the password inco
22. than a LAN cable to the LAN jack It could cause damage or malfunction fr DC IN 19V jack The AC adaptor connects to this jack in order to a power the computer and charge its internal batteries Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase using the wrong AC adaptor can cause damage to the computer User s Manual 3 4 Underside O k The following figure shows the idera d f computer You should ensure that the display is closed before the c avoid causing any damage Figure 3 4 The underside of the K b i is turned over to Oa 1 Battery lock 2 Battery release latch 3 Battery pack 4 Memory module slot 5 Stereo speakers Product appearance depends on the model you purchased D a Battery lock E User s Manual Battery release latch Battery pack Memory module slot Slide the battery lock to release the battery pack ready for removal Slide and hold this latch into its Unlock position in order to release the battery pack for removal For more detailed information on removing the battery pack please refer to the Battery section The rechargeable lithium ion battery pack provides power to the computer when the AC adaptor is not connected For more detailed information on the use and operation of the battery pack please refer to the Battery section
23. the Power Options to Balance m The screen saver is disabled while TOSHIBA Media Player is playing a video file or slideshows of photos The computer will not enter Sleep Hibernation and shut down mode automatically while TOSHIBA Media Player is running m The display automatic power off function is disabled while TOSHIBA Media Player is playing a video file or slideshows of photos User s Manual 5 13 lt E The Resolution function was T adjusted for the internal monitor Hence please turn OFF R KAN when viewing on external monitor m Playback of high bit rate content may ck one dropping audio skipping or decrease in computer performane Ca Operating TOSHIBA Media Player by sMe TrueLink The steps for playing a video file on a local library am 1 Click My Local Library on the Start Page of TOSHIBA Meio Player 2 Click a video file to playback Qa The steps for playing a music file on a local library K 1 Click My Local Library on the Start Page of TOSHIBA Media Piaya 2 Click Music in the upper left corner of the screen 9 3 Select an artist icon or album icon for playback 4 Click a music file to playback The steps for playing a photo file on a local library 1 Click My Local Library on the Start Page of TOSHIBA Media Player 2 Click Photos in the upper left corner of the screen 3 Select a folder icon or date icon for playback 4 Click a photo file to playback Opening TOSHIBA Media Player by
24. the Power saver option under Select a power plan in the Power Options User s Manual 6 6 Real Time Clock Q JA Q Problem Procedure The BIOS setting The charge in the Real fi Clock RTC battery and system date has run out you will need to set the date and time time are lost in the BIOS setup application By using the following steps 1 Press and hold the F2 key andth n turn on the computer Release the F2 key e second after the computer is power on Q 2 Set the date in the System Date field Set the time in the System Time field O 4 Press F10 a confirmation message will be i displayed s o 5 Press the ENTER key the BIOS setup application will end and the computer will restart D Keyboard Keyboard problems can be caused by the setup and configuration of the computer please refer to the The Keyboard section for further information Problem Procedure Output to screen is Please refer to your software s documentation to garbled ensure that it is not remapping the keyboard in any way remapping involves changing or reassigning the function of each key If you are still unable to use the keyboard you should contact TOSHIBA Support Internal display panel Apparent computer s display panel problems may be related to the computer s setup and configuration please refer to the TOSHIBA System Settings section for further information Problem Procedure No display Press the function keys to adjust th
25. the system will continue to boot according to the current and available settings in TOSHIBA System Settings Boot speed Hp This option allows you to select system boot up speed OA Fast Reduces system boot up time System can b6pt only from the built in HDD and only internal L and keyboard are supported during the boot SA process Normal System boots up at normal speed Panel Open Power On This option allows you to change the Panel Open Power On setting Enabled Enables the Panel Open Power On function When you open the display panel while your computer is turned off the system will boot up automatically Disabled Disables the Panel Open Power On function The Panel Open Power On feature is supported with some models Keyboard This tab allows you to set conditions for the Keyboard Function Keys Mode This feature allows you to configure the Function Keys Mode Please refer to the Function Key section for more information about function keys Special function Press the function key by itself to use special mode functions Hold FN first to use standard F1 F12 functions Standard F1 F12 Press the function key by itself to use standard mode F1 F12 functions Hold FN first to use special functions py Wake up on Keyboard Q JA When this feature is enabled and the conte ris in Sleep Mode you can turn on the system by pressing any key Ho please be aware that this option will only work with the int
26. try changing Touch Pad does the double click speed setting within the Mouse not work Control utility 1 To access this utility click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse 2 Within the Mouse Properties window click the Buttons tab 3 Set the Double Click Speed as required and click OK User s Manual 6 9 O User s Manual Problem The on screen pointer moves too fast or too slow The reaction of Touch pad is either too sensitive or not sensitive enough USB mouse Problem On screen pointer does not respond to mouse operation Double clicking does not work Or Procedure In this instance yore uld initially try changing the speed setting with Mouse Control utility 1 To access this utility Glick Desktop gt Desktop Assist gt Contfol Panel gt Hardware and Sound gt ie 2 Within the Mouse Properties dow click the Pointer Options tab eh 3 Set the pointer speed as required ARO ick OK C If you are still unable to resolve the problem gt contact TOSHIBA Support S Adjust the touch Sensitivity Q To access it click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse If you are still unable to resolve the problem contact TOSHIBA Support Procedure In this instance the system might be busy Try moving the mouse again after waiting a short while Remove the mouse from the compute
27. 100 megabits per second 100BASE TX be sure to connect with a CAT5 cable or higher You cannot use a CAT3 cable If you are using Ethernet LAN 10 megabits per second 10BASE T you can connect with a CAT3 or higher cable Connecting the LAN cable To connect the LAN cable follow the steps as detailed below AN E Connect the AC adaptor before connecting the LAN cable The AC adaptor must remain connected during LAN use If you disconnect the AC Adaptor while the computer is accessing a LAN the system may hang up E Do not connect any other cable to the LAN jack except the LAN cable Otherwise malfunctions or damage may occur E Do not connect any power supplying device to the LAN cable that is connected to the LAN jack Otherwise malfunctions or damage may occur 1 Turn off the power to all external devices connected to the computer User s Manual 4 7 Battery O 2 Plug one end of the cable into the LAN jack Press gently until you hear the latch click into place Q gt Figure 4 5 Connecting LAN cable O Ste 1 LAN jack 2 LAN cable re 3 Plug the other end of the cable into a LAN hub connector or router 6 Check with your LAN administrator and hardware or software vendor before using or configuring a network connection This section explains battery types use recharging methods and handling Battery types User s Manual The computer has different types of batteries Battery pack When
28. 2 11a n W56 Device Authorization User s Manual This device obtains the Technical Regulation Conformity Certification and it belongs to the device class of radio equipment of low power data communication system radio station stipulated in the Telecommunications Business Law of Japan BH Intel 2200BNHMW 802 11b g n Wireless LAN The Name of the radio equipment 2200BNHMW Japan Approvals Institute for Telecommunications Equipment Approval Number D111209003 E Realtek RTL8188CE Wireless LAN 802 11n PCI E NIC b g n Wireless LAN The Name of the radio equipment RTL8188CE Japan Approvals Institute for Telecommunications Equipment Approval Number D100075001 E Realtek RTL8723AE Wireless LAN 802 11n PCI E NIC b g n Wireless LAN and Bluetooth The Name of the radio equipment RTL8723AE DSP Research Inc Approval Number D111514003 i O B Intel 2230BNHMW 802 11b g n Witejess LAN with Bluetooth The Name of the radio equipment 2249NHMW DSP Research Inc y Approval Number D111287003 Z The following restrictions apply K m Do not disassemble or modify the device Ly Do not install the embedded wireless module into othefievice Q Radio approvals for wireless devices Uy A Approved Countries Regions for Wireless Devices This equipment is approved to the radio standard by the countries regio 47 ns in the following table Gs Do not use this equipment in the countries regions which are not listed in the
29. AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor m Never plug the AC adaptor into a power source that does not correspond to both the voltage and the frequency specified on the regulatory label of the unit Failure to do so could result in a fire or electric shock possibly resulting in serious injury m Always use or purchase power cables that comply with the legal voltage and frequency specifications and requirements in the country of use Failure to do so could result in a fire or electric shock possibly resulting in serious injury The supplied power cord conforms to safety rules and regulations in the region the product is bought and should not be used outside this region For use in other regions please buy power cords that conform to safety rules and regulations in the particular region E Do not use a 3 pin to 2 pin conversion plug O O m When you connect the AC adaptor to the computer always follow the steps in the exact order as described in the User s Manual Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical charge and cause an el
30. Camera LED Web Camera a The built in me hone allows you to import and record sounds fotyour application please refer to the Sound Syst ope Video mode section for more information 4 The Web Camera LED gl when the Web Camera is operating A Web Camera is a device that aly you to record video or take photographs with your computer You can use it for video chatting or video conferences using a communicatio iool Enables the transmission of video and use video chat via the internet using specialized on applications S Do not point the web camera directly at the sun Do not touch or press strongly on the web camera lens Doing so may reduce image quality Use an eyeglass cleaner cleaner cloth or other soft cloth to clean the lens if it becomes dirty Display screen Legal Footnote LCD 35 6cm 14 LCD screen configured with the following resolution H HD 1366 horizontal x 768 vertical pixels Please be aware that when the computer is operating on the AC adaptor the image displayed on the internal screen will be somewhat brighter than when it operates on battery power This difference in brightness levels is intended to save power when operating on batteries For more information regarding LCD please refer to the Legal Footnotes section Power button Display hinges Keyboard Press this button to turn the computer s power on or off The display hinges allow the display panel to be posi
31. I press the power button and When I close the lid 3 Click the Save changes button Data save in Hibernation Mode When you turn off the power in Hibernation Mode the computer will take a moment to save the current data in memory to the Hard Disk Drive After you turn off the computer and the content of memory has been saved to the Hard Disk Drive turn off the power to any peripheral devices Do not turn the computer or devices back on immediately Wait a moment to let all capacitors fully discharge Chapter 3 fo The Grand Tour ey This chapter identifies the various components of the compute it is recommended that you become familiar with each before you o the computer p gt Legal Footnote Non applicable Icons For more information regarding Non applicable Icons please refer tothe 3 Legal Footnotes section Qa T Please handle your computer carefully to avoid scratching or damaging the surface Front with the display closed The following figure shows the computer s front with its display panel in the closed position Figure 3 1 Front of the computer with display panel closed o 1 DC IN Battery indicator 3 Wireless communication indicator 2 Power indicator Product appearance depends on the model you purchased a DC IN Battery The DC IN Battery indicator shows the condition indicator of the DC IN and the battery s charge white indicates the battery is fully charge
32. Ka You can install additional memory into the computer in order to increase Q the amount of system memory that is available This section describes how to install and remove optional memory modules 1 m You should place a mat beneath the computer in order to prevent the J computer s lid from becoming scratched or damaged when you are installing replacing the memory module In this instance you should avoid mats that are made of materials that hold or generate static electricity E When installing or removing a memory module you must ensure that you do not touch any other internal areas of the computer A m Use only memory modules approved by TOSHIBA amp Do not try to install or remove a memory module under the following conditions a The computer is turned on b The computer was shut down in either Sleep or Hibernation Mode c Wake up on LAN is enabled d The wireless communication function is on e Sleep and Charge function is enabled Be careful not to let screws or other foreign matter fall into the computer It could cause malfunction or electric shock E Additional memory module is a precision electronic component that may be fatally damaged by static electricity Since the human body can carry static electricity it is important that you discharge yourself before touching or installing any additional memory modules To discharge your body s static electricity simply touch any metal close to you with bare hands
33. Service Station User s Manual 5 2 ip i TOSHIBA PC Health Monitor TOSHIBA Resolution Plug in for Windows Media Player O The TOSHIB PC Health Monitor application proactively monft ss a number of system functions such as bower consumption battery health and system cool informing you of significant system conditions This application recognizes the system and adividual component serial numbers and will track cific activities related to their usage L For details on TOSHIBA PC Health Monitor see the help file Yop The plug in lets you upconverts wmv and fr videos on Windows Media Player O For more information please refer to the TOSHIBA Resolution Plug in for Windows O Media Player Help To access it click Desktop gt Desktop Assist gt Media amp Entertainment gt TOSHIBA Resolution Plug in for Windows Media Player Help You may not have all the software listed above depending on the model you purchased Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use Access each function using the following procedures 1 To access the Power Options click Desktop gt Desktop Assist gt Control Panel gt System and Security gt Power Options Function keys Display automatic power off HDD automatic power off Function keys are specific key combinations that let you
34. The memory module slot allows for the installation replacement and removal of additional memory module The size of the memory modules varies depending on the model The actual amount of useable system memory will be less than the installed memory modules Refer to the Additional memory module section ee O O Stereo speakers The oe sound generated by your software as wel udio alarms such as low battery condition rag gu a by the system om Front with the display open l This section shows the computer with the display panel n In order to open the display lift the display panel up and position it at Semiotics viewing angle for you ks Figure 3 5 The front of the computer with the display panel e 1 Wireless communication antennas 7 Display hinges not shown 2 Microphone 8 Keyboard 3 Web Camera LED 9 Touch Pad 4 Web Camera 10 Touch Pad control buttons 5 Display screen 11 LCD Sensor switch not shown 6 Power button Provided with some models Product appearance depends on the model you purchased Wireless Some computers in this series are equipped with communication the Wireless LAN Bluetooth antennas antennas Some computers in this series are equipped with the Wireless WAN WiMAX antennas Legal Footnote Wireless LAN For more information regarding Wireless LAN please refer to the Legal Footnotes section User s Manual 3 6 A User s Manual Microphone Web
35. Y D KA TOSHIBA iy Leading Innovation gt gt gt Dy b cn ey T KN User s Manual 7 U940 A by Table of Contents Chapter 1 TOSHIBA Legal Regulatory and safey Copyright Disclaimer and Trademarks sisi EAE coe scanty 1 1 Regulatory Information cccsesesseseseeeneeeees Q aE AE 1 2 Video Standard Notice cecccsceeeeeeeeeeeeeeeeeeeeees E 1 7 OpenSSL Toolkit License ISSUES ssssnssusssensrnnrrennernnnens cA siatseavects 1 7 ENERGY STAR Program ccccessecesseeeeeseeeeeeeeeseseeeesnsenenensees Rey abundi 1 10 Disposing of the computer and the computer s batteries Q gt 1 11 General Precautions ssssssseueseussennnrenunnnnneennnnnnnnnnnnnnnnnnennnnnnnn nunne nn nnn 11 Information for Wireless Devices s sssssuusesuseennnrenurrnnnrennnrnnnnnnnnennnnee 1 Legal Footnotes eee 1 20 Messages ee 1 23 Chapter 2 Getting Started Equipment checklist ccccscsessseseeeeeeeeeeeeeeeeeeeseeeesesassesseessssseseaaaaes 2 1 Conventions ssssssssssnsesennrennnnnnrrnnnennnrnnnnnnnnnennnnennnrnnnnnnnnnennnnennn nennen nanena 2 1 Using your product for the first time 22 ccceseeeeeeeeeeeeeeeeeeeeeeeees 2 2 Turning off the pOWer s ccceeeeeee cece cence ee eee ee ee eeeeeeeeeeeeeeeeeeeeneeeeeaees 2 7 Chapter 3 The Grand Tour Front with the display closed ccsccceeeeesseeeeeseeeeeseesnsseeeeeseeneneseeens 3 1 Left Side eonna cine cca daveucacr
36. atically AC power Or Procedure Leave the computer until it reaches room temperature If the co ter has reached room temperature and it still cog yot start or if it starts but shuts down quickly con ae TOSHIBA Support E gt If you have trouble turning on the computer with the AC adaptof nnected you should check the status of the DC IN Battery indicator Pleas amp efer to the Monitoring of power condition section for further information KZ Problem AC adaptor doesn t power the computer Battery N Procedure X Check the connections to make sure that the On power cord adaptor is firmly connected to the computer and a working power outlet Check the condition of the cord and terminals If the cord is frayed or damaged it should be replaced while if the terminals are soiled they should be cleaned with a clean cotton cloth If the AC adaptor still does not power the computer you should contact TOSHIBA Support If you suspect a problem with the battery you should check the status of the DC IN Battery indicator Problem Battery doesn t power the computer User s Manual Procedure The battery may be discharged connect the AC adaptor to recharge the battery Or Problem Procedure Battery doesn t If the battery is conifigaely discharged it will not charge when the AC begin charging immediaf ly in these instances you adaptor is attached should wait a few minute fore tryi
37. ation is running Doing so could cause loss of data E Never turn off the power disconnect an external storage device or remove storage media during data read write Doing so can cause data loss 3 Click the Settings charm 4 Click Power and then select Shut down 5 Turn off any peripheral devices connected to your computer Do not turn the computer or peripheral devices back on immediately wait a short period to avoid any potential damage A by Restarting the computer KA Certain conditions require that you reset th omputer for example if E You change certain computer settings Z m An error occurs and the computer does not r sp nd to your keyboard commands If you need to restart the computer there are three way this can be achieved m Inthe Settings charm click Power and then select Restdep m Press CTRL ALT and DEL simultaneously once to displa the menu window and then select Restart by clicking the power icon aeithe lower right corner m Press the power button and hold it down for five seconds Once the Q computer has turned itself off wait between ten and fifteen seconds before turning the power on again by pressing the power button Sleep Mode If you have to interrupt your work you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode In this mode data is maintained in the computer s main memory so that when you turn on the power again
38. ay screen by spraying a small amount o SS cleaner onto a soft clean cloth and then wiping the screen gently the cloth cs Never spray cleaner directly onto the computer or let liquid run into any part of it Never use harsh or caustic chemical products to clean the computer Moving the computer User s Manual While the computer is designed for flexible day to day usage you should exercise a few simple precautions when moving it in order to help ensure trouble free operation m Make sure all disk disc activity has ended before moving the computer E Turn off shut down the computer m Disconnect the AC adaptor and all peripherals before moving the computer m Close the display panel Do not pick up the computer by its display panel Before carrying your computer shut it down disconnect the AC adaptor and allow it to cool down a failure to follow this instruction may result in minor heat injury E Be careful not to subject the computer to impact or shock a failure to follow this instruction could result in damage to computer computer failure or loss of data Never transport your computer with any cards installed this may cause damage to either the computer and or the card resulting in product failure E Always use a suitable carry case when transporting the computer m When carrying your computer be sure to hold it securely so that it does not fall or hit anything Donotcarry your computer by holding any
39. battery is extremely hot it might not charge at all To ensure the battery charges to its full capacity you should charge it at room temperature of between 5 C to 35 C 41 F to 95 F The battery is nearly completely discharged In this instance you should leave the AC adaptor connected for a few minutes and the battery should begin charging The DC IN Battery indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions E The battery has not been used for a long time m The battery has completely discharged and been left in the computer for a long time In such cases you should follow the steps as detailed below 1 Fully discharge the battery by leaving it in the computer with the power on until the system automatically turns itself off ip ____e O 2 Connect the AC adaptor to the oN 19V jack of the computer and to a wall outlet that is supplying power Q 3 Charge the battery until the DC IN Bat indicator glows white Repeat these steps two or three times until the ry recovers normal capacity h Monitoring battery capacity PA T Remaining battery power can be monitored using the followingymethods H Clicking the battery icon on the Taskbar Uy Via the Battery Status in the Windows Mobility Center window amp You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time This is
40. battery pack is being charged however in the event that DC IN Battery indicator does not glow this indicates that power is not being supplied check the connections for the AC adaptor and the power cord 5 Charge the battery pack until the DC IN Battery indicator glows white m If you have extra battery packs rotate their use Ifyou will not be using the system for an extended period for example for more than one month remove the battery pack from the computer m Store spare battery packs in a cool dry place out of direct sunlight User s Manual 4 12 G Replacing the battery pack User s Manual h oF Please be aware that the battery pack is classified as a consumable item The operating life of the battery pack will gradua duce through repeated charging and discharging and will need t replaced when it reaches the end of its operating life In addition to this ypu might also replace a discharged battery pack with a charged spare n you are operating your computer away from an AC power source fofe extended period of time E This section explains how to remove and install the battery pack begins with the removal process which is detailed through the following steps O F aay a E Do not remove the battery pack while the computer is in Sleep Mode Data is stored in RAM so if the computer loses power it could be lost E In Hibernation Mode data will be lost if you remove the battery pack or disconnect the AC a
41. blically avdio version or derivative of this code cannot be changed i e this code c mot simply be copied and put under another distribution licence including th amp GNU Public Licence 9 R Co O ENERGY STAR Program K User s Manual O Your Computer model may be ENERGY STAR compliant If the model you purchased is compliant it is labeled with the ENERGY STAR logo on the computer and DEGNA the following information applies TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes D To conserve energy your computer is set to enter the low power Sleep Mode which shuts down the system and display within 15 minutes of inactivity in AC power mode TOSHIBA recommends that you leave this and other energy saving features active so that your computer will operate at its maximum energy efficiency You can wake the computer from Sleep Mode by pressing the power button Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the US EPA and the EU Commission According to the EPA a computer meeting the new ENERGY STAR specifications will use between 20 and 50 less energy d
42. cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Contact Address TOSHIBA America Information Systems Inc 9740 Irvine Boulevard Irvine California 92618 1697 Telephone 949 583 3000 EU Declaration of Conformity This product is carrying the CE Mark in accordance with the related European Directives Responsible for CE Marking is TOSHIBA Europe GmbH Hammfelddamm 8 41460 Neuss Germany The complete and official EU Declaration of Conformity can be found on TOSHIBA s web site http epps toshiba teg com on the Internet CE compliance This product is labelled with the CE Mark in accordance with the related European Directives notably Electromagnetic Compatibility Directive 2004 108 EC for the notebook and the electronic accessories including the supplied power adapter the Radio Equipment and Telecommunications Terminal Equipment Directive 1999 5 EC in case of implemented telecommunication accessories and the Low Voltage Directive 2006 95 EC for the supplied power adapter Furthermore the product complies with the Ecodesign Directive 2009 125 EC ErP and its related implementing measures User s Manual 1 3 O O This product and the original options ar gesigned to observe the related EMC Electromagnetic Compatibility an fety standards However TOSHIBA cannot guarantee that this produdtgtill observes these EMC standards if
43. cessed from Desktop gt Desktop J Assist The Desktop Assist is located in the taskbar of the Desktop Furthermore some utilities can also be launched from Start screen and desktop shortcut TOSHIBA Desktop TOSHIBA Desktop Assist is a graphical user Assist interface that provides access to specific tools and TOSHIBA utilities and applications that make the use and configuration of the computer easier To access this utility click Desktop gt Desktop Assist TOSHIBA PC The TOSHIBA PC Diagnostic Tool will display Diagnostic Tool basic system configuration information and allow the functionality of some of the computer s built in hardware devices to be tested For details on TOSHIBA PC Diagnostic Tool see the help file TOSHIBA Password This utility allows you to set a password in order utility to restrict access to the computer TOSHIBA System This utility allows you to customize your Settings hardware settings according to the way you work with the computer and the peripherals you use User s Manual 5 1 O O TOSHIBA eco Utility This a ara with eco mode This mode slightly lo erformance of some devices to reduce as tric power consumption You can realize mea Sige power savings by using it continuously TOSHIBA eco Utility win control and monitor your power savings Vagious information can help you to understand your d gree of contribution to the environment amp Furthermore this utility contains Peak R
44. ck RTC and calendar Video RAM The memory in a computer s graphics adaptor used to store the image displayed on a bitmap display The amount of Video RAM available is dependent on the computer s system memory Desktop gt Desktop Assist gt Control Panel gt Appearance and Personalization gt Display gt Adjust resolution The amount of Video RAM can be verified by clicking the Advanced settings button in the Screen Resolution window Legal Footnote Memory Main System For more information regarding Memory Main System please refer to the Legal Footnotes section User s Manual 3 9 Op Display controller The display cOptroller interprets software commands into hardware commands that turn particular parts one creen on or off The display controller controls the video mode and uses industry dard rules to govern the screen resolution and t waximum number of colors that can be displayed abany one time Therefore software written for a given video mode will run on any computer that sypports that mode Yop Oo Legal Footnote Graphics Processing Unit GPU For more information regarding Graphics Processing Unit GPU please refer to the Legal Footnotes section 2 Intel Display Power Saving Technology Intel GPU model may include the Display Power Saving Technology feature that can save the computer s power consumption by optimizing picture contrast on the internal LCD This feature can be used if the
45. ck and concave Speaker Configuration Click the Auto Test button gt to confirm the internal speakers or the headphone sound is coming from the right direction Default Format You can change the sample rate and bit depth of sound Video mode Video mode settings are configured via the Screen Resolution dialog To open the Screen Resolution dialog click Desktop gt Desktop Assist gt Control Panel gt Appearance and Personalization gt Display gt Change display settings 7 If you are running some applications for example a 3D application or video J playback and so on you may see some disturbance flickering or frame dropping on your screen If that occurs adjust the resolution of display lowering it until the screen is displayed properly Computer Handling This section explains computer handling and maintenance User s Manual 4 26 G py Cleaning the computer MA A To help ensure long trouble free operation ep the computer free of dust and dirt and use care with all liquids around itQ BH Be careful not to spill liquids into the computetJf the computer does get wet turn the power off immediately and let the computer dry completely in these circumstance you should get fig computer inspected by an authorized service provider in order Assess the scope of any damage pb Clean the plastics of the computer using a slightly water d tapened cloth m You can clean the displ
46. computer is E running under battery mode H using the internal LCD display only The Display Power Saving Technology feature is enabled at factory default If you want to disable the feature you can disable it The Display Power Saving Technology feature can be disabled in the Intel Graphics and Media Control Panel You can access this control panel in the following way H Right click on the desktop and click Graphics Properties In this control panel 1 Click Power 2 Select On battery from the drop down menu in Power Source 3 Clear the Display Power Saving Technology check box 4 Click OK If you want to enable this feature under the conditions mentioned above select the Display Power Saving Technology check box Intel Rapid Start Technology Some computers in this series support Intel Rapid Start Technology which enables the computer to change to Hibernation Mode from Sleep Mode after a specified period of time User s Manual 3 10 O O With the Intel Rapid Start Technology Windows can rapidly resume from Hibernation Mode and battery life whee longer than when in Sleep Mode Intel Rapid Start Technology is enabled at oe The computer will switch to Hibernation Mode after two hours of Mode You can use BIOS Setup to enable disable the function and change the specified time setting from Sleep Mode to Hibernation M 1 2 3 T User s Manual Press and hold the F2 key and then turn o
47. d Ensure that any required USB device drivers are properly installed to achieve this you should refer to both the device documentation and the operating system documentation Sleep and Charge function For more information and settings please refer to the Sleep and Charge section User s Manual 6 11 A User s Manual Problem cannot use the Sleep and Charge function The battery depletes quickly even when turned OFF the power of the computer External devices connected to the compatible ports do not work when connected to a compatible port Op Procedure Sleep and Charge f ingtion may be disabled Enable the Sleep and Charge function in the TOSHIBA System Settings When there is a current overt of the external device connected to the compati ort USB bus power DC5V supply may be stopp d for safety reasons When this happens disconnie t an external device if some external devices connected After that turn the power of the computer ON OFF to restore the function If iid function can not be still used even if only one os external device is connected stop using the S4 external device because its current is over the acceptable value of this computer Some external devices may not be able to use the Sleep and Charge function In this case please try one or more of the following methods E Select another mode Turn OFF the computer while external devices are connected Co
48. d as well as the natural performance variations produced by the design of individual components Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication Recharge time varies depending on usage Battery may not charge while computer is consuming full power After going through many charge and discharge cycles the battery will lose its ability to perform at maximum capacity and will need to be replaced This is a normal phenomenon for all batteries To purchase a new battery pack see the accessories information that is shipped with your computer Hard Disk Drive HDD Capacity User s Manual 1 Gigabyte GB means 10 1 000 000 000 bytes using powers of 10 The computer operating system however reports storage capacity using powers of 2 for the definition of 1 GB 230 1 073 741 824 bytes and therefore shows less storage capacity Available storage capacity will also be less if the product includes one or more pre installed operating systems such as Microsoft Operating System and or pre installed software applications or media content Actual formatted capacity may vary 1 22 o E LCD K Over a period of time and depending on th age of the computer the brightness of the LCD screen will lde is an intrinsic characteristic of LCD technology CO O Maximum brightness is only available when operatirfgin AC power mode Screen will dim when the computer is ope
49. d while the power is being correctly supplied from the AC power adaptor Please refer to the Monitoring of power condition section for more information on this feature User s Manual 3 1 lt a Power indicator The Power in ge normally glows white when the computer is d on However if you turn the computer off in ine sjeep Mode this indicator will blink amber dia two seconds on two seconds off p yp Wireless The Wireless ae ee glows communication amber when the Bluetooth WireleSs LAN or indicator Wireless WAN functions are turned Only some models are equipped with BK footh and Wireless LAN functions 0 Some models are equipped with a Wireless WAN module cs Qg Left side The following figure shows the computer s left side Figure 3 2 The left side of the computer r acc 1 Security lock slot 3 Cooling vents 2 Universal Serial Bus USB 2 0 port Product appearance depends on the model you purchased Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer egi Universal Serial Bus One Universal Serial Bus port which complies to USB 2 0 port the USB 2 0 standard is provided on the left side of the computer The USB 2 0 port is not compatible with USB 3 0 devices 7 Please note that it is not possible to confirm the operation of all functions of J all USB d
50. daptor before the save is completed Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries Removing the battery pack To remove a discharged battery follow the steps as detailed below 1 Save your work 2 Click Power in the Settings charm and then click Shut down while holding down the SHIFT key ensure that the Power indicator is off 3 Remove all cables and peripherals that are connected to the computer 4 Close the display panel and turn the computer upside down 5 Slide the battery lock into its unlock Tm position 6 Slide and hold the battery release latch to disengage the battery pack and then remove it from the computer Figure 4 6 Releasing the battery pack 1 1 Battery lock 3 Battery pack 2 Battery release latch Q G o O Installing the battery pack Q JA Q To install a battery pack follow the steps aSdetailed below QR Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries L 1 Insert the battery pack as far as it will go into the comp ter 2 Ensure that the battery pack is securely in place and the ery lock is in its locked position Q 3 Turn your computer over 2 O Additional memory module
51. de if the external monitor has been disconnected while in Sleep Mode To keep this from happening do not disconnect the external monitor while the computer is in Sleep or Hibernation Mode Remember to turn off the computer before disconnecting the external monitor When the display panel and an external monitor are set to clone mode and they are turned off by the timer the display panel or the external monitor may not display when turned on again If this occurs press the function key to re set the display panel and external monitor to clone mode Check that the cable connecting the external monitor to the computer is firmly attached If you are still unable to resolve the problem contact TOSHIBA Support Procedure Check for a firm cable connection between the LAN jack and the LAN hub O a Problem Procedure Wake up on LAN Make sure the AC tor is connected The does not work Wake up on LAN functi S alles power even when the system is off lt If problems persist consult yor LAN administrator Wireless LAN pb Q If the following procedures do not restore LAN access consult YSdGAAN administrator For more information on wireless communication re Operating Basics p g Op Problem Procedure X 3 Cannot access Make sure the computer s Wireless communication Wireless LAN function is on If problems persist contact your LAN administrator Bluetooth For further information on Bluetooth wireless com
52. dia follow the steps as detailed below PA 1 Turn the memory media so that the contacts metal areas are face down Uy 2 Insert the memory media into the Memory media slot on the roa the computer 3 Press the memory media gently to ensure a firm connection is madel The memory media will be partially out of the slot Oo Figure 4 12 Inserting a memory media 1 Memory media slot 2 Memory media m Make sure memory media is oriented properly before you insert it If you insert the media in wrong direction you may not be able to remove it E When inserting memory media do not touch the metal contacts You could expose the storage area to static electricity which can destroy data E Do not turn the computer off or switch to Sleep Mode or Hibernation Mode while files are being copied doing so may cause data to be lost Removing a memory media The following instructions apply to all types of supported media devices To remove a memory media follow the steps as detailed below 1 Click the Desktop tile and open the Safely Remove Hardware and Eject Media icon on the Windows Taskbar 2 Point to memory media and click the left Touch Pad control button 3 Grasp the media and remove it 4 21 A DA E Do not remove the memory media while the computer is in Sleep or Hibernation Mode The computer could become unstable or data in the memory media could be lost E Do not remove only the miniSD microSD Card while leaving
53. ding Wake up on LAN from sleep or hibernation you must check the Allow the device to wake the computer check box within the LAN Device properties This feature does not effect the Wake up on LAN from sleep or hibernation h Power will be automatically turned on when a signal is received frp an administrator s computer which is connected via a network Q The following settings can be changed when the Built in LAN is Enabist Connect the AC adaptor when using the Wake up on LAN function The ey battery retention time will be shorter than the times listed in this manual a o when this function is enabled Enabled Enables Wake up on LAN from shutdown Disabled Disables Wake up on LAN from shutdown Built in LAN This feature enables or disables the Built in LAN Enabled Enables Built in LAN functions Disabled Disables Built in LAN functions TOSHIBA Media Player by sMedio TrueLink Please be aware of the following limitations when you use the TOSHIBA Media Player by sMedio TrueLink Notes on use This software is a multimedia player which can be used to play back video music and photo However some files may not be able to play back normally TOSHIBA Media Player can only support resolution higher than 1280x800 E Itis recommended that the AC adaptor be connected while TOSHIBA Media Player is running Power saving features may interfere with smooth playback When TOSHIBA Media Player is used with a battery power set
54. e function that can help reduce power usages a periods of peak demand by shifting some po consumption to periods when demand is cies To access this utility click Desktop gt Desktop Gs Assist gt Tools amp Utilities gt eco Utility For details on TOSHIBA eco utility see the help file TOSHIBA Media This software is a multimedia player which can Player by sMedio be used to play back video music and photo TrueLink TOSHIBA Media Player can play back contents on a local library nome network SkyDrive To access it click the Media Player icon on the Start screen For details please refer to the Tutorial TOSHIBA Function This utility allows you to perform some features Key by pressing a specified key or combined with the FN key To setup this utility click Desktop gt Desktop Assist gt Tools amp Utilities gt Function Key For details please refer to the Function Key section TOSHIBA Service This application allows your computer to Station automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs When enabled this application periodically transmits to our servers a limited amount of system information which will be treated in strict accordance with the rules and regulations as well as applicable data protection law To access this utility click Desktop gt Desktop Assist gt Support amp Recovery gt
55. e display priority and to make sure it is not set for output to an external monitor User s Manual 6 7 O Problem Markings appear on the computer s display panel Hard Disk Drive Memory Media Card User s Manual Problem Computer does not boot from Hard Disk Drive Slow performance Or Procedure These marks may Fagg come from contact with the keyboard and Touch P while the display panel has been closed You sh try to remove the marks by gently wiping the lay panel with a clean dry cloth or if this fails witha good quality LCD screen cleaner In this latter oi you should always follow the instructions4with the screen cleaner and always ensure you l t the display panel dry properly before closing te OB Ya 6 Procedure Check to see whether there is a disc in the optical disc drive if so remove it and try to start the computer again If this has no effect check the Boot Priority setting within the TOSHIBA System Settings please refer to the Boot Priority Options section for further information The files on the Hard Disk Drive may be fragmented in this instance you should run the disk Defragmentation utility to check the condition of your files and the Hard Disk Drive Please refer to the operating system s documentation or online Help File for further information on operating and using the Defragmentation utility As a last resort you should reformat the Hard Disk Drive and then re
56. e of the audio control functions Volume Mixer The Volume Mixer utility lets you control the audio volume for playback of devices and applications under Windows User s Manual 4 24 O y H To launch the Volume Mixer utah Desktop and right click on the speaker icon on the Taskbar and k n Open Volume Mixer from the sub menu m To adjust the volume level of speakers or R ggorone move the Speakers slider m To adjust the volume level of an application 1 ep are using move the slider for the corresponding application be bp Microphone Level FA g Follow the steps below to change the microphone recording leve 1 Right click on the speaker icon on the Taskbar and select Recording devices from the sub menu on 2 Select Microphone and click Properties S 3 On the Levels tab move the Microphone slider to increase or decrease the microphone volume level If you feel the microphone volume level is inadequate move the Microphone Boost slider to a higher level SRS SRS Premium Sound offers the richest and most immersive audio experience in any listening environment using technologies from SRS Labs To access the utility click Desktop gt Desktop Assist gt Media amp Entertainment gt SRS Premium Sound HD SRS Premium Sound 3D Your computer may be preinstalled with SRS Premium Sound HD or SRS Premium Sound 3D depending on the model you purchased For more information please refer to the help
57. e proper disposal of products and os batteries and thus help to prevent potential negative S4 consequences for the environment and human health Q For more detailed information about the collection and recycling programmes available in your country please visit our website http eu computers toshiba europe com or contact your local city office or the shop where you purchased the product Pb Hg Cd These symbols may not stick depending on the country and region where you purchased REACH Compliance Statement The new European Union EU chemical regulation REACH Registration Evaluation Authorization and Restriction of Chemicals entered into force on 1 June 2007 TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation Please consult the following website www toshiba europe com computers info reach for information about the presence in our articles of substances included on the candidate list according to article 59 1 of Regulation EC No 1907 2006 REACH in a concentration above 0 1 weight by weight Following information is only for Turkey E Compliant with EEE Regulations TOSHIBA meets all requirements of Turkish regulation 26891 Restriction of the use of certain hazardous substances in electrical and electronic equipment E The number of possible pixel failures of your display is d
58. eases at low temperatures Whether you enable Sleep and carton H The condition of the battery terminals yo Popout always ensure the c terminals stay clean by wiping them with a dry cloth before installing the battery pack apr Batteries exhausted time Ly When you turn off the power of your computer with batteries ide harged the batteries will be exhausted within the following approximate or y Battery type Sleep Mode Shut Down Mode Battery pack about 2 5 days about 25 days i7 45Wh 4 cell RTC battery about 30 days about 30 days Extending battery life To maximize the life of your battery packs Atleast once a month disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges Before doing so follow the steps as detailed below 1 Turn off the computer s power 2 Disconnect the AC adaptor and turn on the computer s power if it does not turn on then go to Step 4 3 Operate the computer on battery power for five minutes If you find that the battery pack has at least five minutes of operating time continue operating until the battery pack is fully discharged however if the DC IN Battery indicator flashes or there is some other warning to indicate a low battery condition go to Step 4 4 Connect the AC adaptor to the DC IN 19V jack of the computer and to a wall outlet that is supplying power The DC IN Battery indicator should glow amber to indicate that the
59. ectrical shock or minor bodily injury when touched As a general safety precaution avoid touching any metal parts m Never place your computer or AC adaptor on a wooden surface furniture or any other surface that could be marred by exposure to heat since the computer base and AC adaptor s surface increase in temperature during normal use m Always place your computer or AC adaptor on a flat and hard surface that is resistant to heat damage Refer to the enclosed Instruction Manual for Safety and Comfort for Os detailed precautions and handling instructions 1 Connect the power cord to the AC adaptor Figure 2 1 Connecting the power cord to the AC adaptor 2 pin plug T Either a 2 pin or 3 pin adaptor cord will be included with the computer J depending on the model User s Manual 2 4 O 2 Connect the AC adaptor s DC oulsbyplug to the DC IN 19V jack on the right of the computer Q gt Figure 2 3 Connecting the DC otak plug to the computer 1 DC IN 19V jack 2 DC output plug gt 3 Plug the power cord into a live wall outlet the DC IN Battery ince on the front of the computer should glow FH Opening the display The display panel can be opened to a wide range of angles for optimal viewing While holding down the palm rest with one hand so that the main body of the computer is not raised slowly lift the display panel this will allow the angle of the display panel to be adjusted to provide optimum clarity Figu
60. efined according to ISO 9241 307 standards If the number of pixel failures is less than this standard they will not be counted as defect or failure User s Manual 1 6 O E Battery is a consumption product ince the battery time depends on the usage of your computer If the battery can not be charged at all then it is a defect or failure The chang ein battery time is not a defect or failure Og g O Following information is only for India O A The use of this symbol indicates that this Poguct may not be treated as household waste A Lb By ensuring this product is disposed of correctly will help prevent potential negative consequences for environment and human health which could otherwi e caused by inappropriate waste handling of this product on For more detailed information about recycling of this S product please visit our website http www toshiba india com or contact call center 1800 200 8674 These symbols may not stick depending on the country and region where you purchased Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC THE VC 1 AND MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER FOR I ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS VIDEO AND OR II DECODING AVC VC 1 AND MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO
61. eiver operate in the 2 4GHz band which is license free and compatible with radio systems in most countries in the world Radio links You can easily establish links between two or more devices with these links being maintained even if the devices are not within a line of sight of each other Security Two advanced security mechanisms ensure a high level of security m Authentication prevents access to critical data and makes it impossible to falsify the origin of a message m Encryption prevents eavesdropping and maintains link privacy LAN The computer has built in support for Ethernet LAN 10 megabits per second 10BASE T or Fast Ethernet LAN 100 megabits per second 100BASE TX This section describes how to connect disconnect to a LAN Do not install or remove a memory module while Wake up on LAN is enabled User s Manual 4 6 bp 7 E The Wake up on LAN function consumes power even when the J system is off Leave the AC adaptor connected while using this feature E The Link speed 10 100 megabits per second changes automatically depending on the network conditions connected device cable or noise and so on ae LAN cable types EA The computer must be configured properly before connecting to a LAN AN Logging onto a LAN using the computer s default settings could cause a malfunction in LAN operation Check with your LAN administrator regarding set up procedures o If you are using Fast Ethernet LAN
62. epending on how it is used Visit http www eu energystar org or http www energystar gov for more information regarding the ENERGY STAR Program ee G O Disposing of the computer avi i the computer s batteries aA mH Discard this computer in accordance with Ropticable laws and regulations For further information contact yar se government H This computer contains rechargeable batteries r repeated use the batteries will finally lose their ability to hold a of BS e and you will need to replace them Under certain applicable laws nig regulation it may be illegal to dispose of old batteries by placing them jh the trash E Please be kind to our shared environment Check with your acal government authority for details regarding where to recycle o b batteries or how to dispose of them properly General Precautions 6 TOSHIBA computers are designed to optimize safety minimize strain and withstand the rigors of portability However certain precautions should be observed to further reduce the risk of personal injury or damage to the computer Be certain to read the general precautions below and to note the cautions included in the text of the manual Provide adequate ventilation Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet even if your computer is in Sleep Mode In this conditio
63. er some external devices cannot be charged solely by supplying USB bus power DC5V As for the specifications of the external devices please contact the device manufacturer or check the specifications of the external devices thoroughly before use m Using the sleep and charge function to charge external devices will take longer than charging the devices with their own chargers m f Sleep and Charge function is enabled the computer s battery will discharge during hibernation or when the computer is turned off It is recommended that you connect the AC adaptor to the computer when enabling the Sleep and Charge function es m External devices connected to the USB bus power DC5V function that interfaces with the power ON OFF of the computer may always be in an operational state When there is a current overflow of the external devices connected to the compatible ports USB bus power DC5V supply may be stopped for safety reasons m When Sleep and Charge function is enabled the USB Wakeup function does not work for compatible ports In that case if there is a USB port that does not have the Sleep and Charge function attach the mouse or keyboard to it If all USB ports have the Sleep and Charge function change to disable Sleep and Charge function The USB Wakeup function will now work but the Sleep and Charge function will be disabled N Metal paper clips or hair pins clips will generate heat if they come into contact wi
64. er s Manual The actual specifications may vary depending on the model you purchased CPU Legal Footnote CPU The processor type varies depending on model To check which type of processor is included in your model open the TOSHIBA PC Diagnostic Tool Utility by clicking Desktop gt Desktop Assist gt Support amp Recovery gt PC Diagnostic Tool For more information regarding CPU please refer to the Legal Footnotes section 5 O Pr Hard Disk Drive or The size of thard disk drive varies depending Solid State Drive on the model Qy To check which typ HDD SSD is included in your model open the OSHIBA PC Diagnostic Tool Utility by clicking Denier gt Desktop Assist gt Support amp Reco eyy gt PC Diagnostic Tool 4 Please note that part of the hard d k overall capacity is reserved as administrationspace wY l E n this manual the word HDD or Hard disk drive also refers to the l SSD unless otherwise stated E SSD is a large capacity storage media which uses Solid State Memory in place of a magnetic disk of the hard disk Or Under certain unusual conditions of prolonged non use and or exposure to high temperatures the SSD may be vulnerable to data retention errors Legal Footnote Hard Disk Drive HDD Capacity For more information regarding Hard Disk Drive HDD Capacity please refer to the Legal Footnotes section RTC battery The internal RTC battery backs up the Real Time Clo
65. ernal keyboaggand only when the computer is in Sleep Mode O Enabled Enables the Wake up on Key gard function Disabled Disables the Wake up on Keyboawt function E USB Uy Q Legacy USB Support KZ O Use this option to enable or disable USB Legacy Emulation If your 8 operating system does not support USB you can still use a USB mouse 6 and keyboard by setting the Legacy USB Support item to enabled e Enabled Enables the USB Legacy Emulation Disabled Disables the USB Legacy Emulation Internal USB 3 0 controller Use this option to enable or disable the internal USB 3 0 controller If Disabled is selected the internal USB 3 0 port s on the computer will work as USB 2 0 port s which will save power Enabled Enables the internal USB 3 0 controller Disabled Disables the internal USB 3 0 controller SATA This tab allows you to set conditions for SATA SATA Interface setting This feature allows you to set SATA interface setting Performance Let HDD SSD work with maximum performance Battery life Let HDD SSD work with battery life mode If this setting is selected this caused performance down LAN Wake up on LAN This feature lets the computer s power be turned on from shutdown when it receives a wake up packet Magic packet from the LAN User s Manual 5 12 eA 7 E The Wake up on LAN function consumes power even when the J system is off Leave the AC adaptor connected while using this feature E Regar
66. evices that are available In view of this it may be noted that some functions associated with a specific device might not operate properly User s Manual 3 2 ob AN Keep foreign metal objects such as screws staples and paper clips out of the USB port Foreign metal objects can create a short circuit which can cause damage and fire possibly resulting in serious injury 5 Cooling vents The cooling vents help the fro essor to avoid overheating Ly Ay A Do not block the cooling vents Keep foreign metal objects such as screws staples and paper clips out of the cooling vents Foreign metal objects can create a short circuit which can cause damage and fire possibly resulting in serious injury Carefully clean the dust on the cooling vents surface using a soft cloth Right side The following figure shows the computer s right side Figure 3 3 The right side of the computer Tete Se eS 9 o o o 0o09 o lt Se om 1 Headphone jack 5 HDMI out port 2 Microphone jack 6 LAN jack 3 Memory media slot 7 DC IN 19V jack 4 Universal Serial Bus USB 3 0 ports Product appearance depends on the model you purchased a Headphone jack A 3 5 mm mini headphone jack enables ma connection of stereo headphones Q Microphone jack A 3 5 mm mini microphone jack enables connection of a three conductor mini jack for stereo microphone input 2 The integrated sound system provides support for the computer
67. ference that may cause undesired operation of this device The term IC before the equipment certification number only signifies at the Industry Canada technical specifications were met O USA Federal Communications Commission FCC 6 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation Refer to the FCC information section for the detailed information Caution Exposure to Radio Frequency Radiation The radiated output power of the Wireless device is far below the FCC radio frequency exposure limits Nevertheless the Wireless device shall be used in such a manner that the potential for human contact during normal operation is minimized In the usual operating configuration the distance between the antenna and the user should not be less than 20cm Please refer to the computer user s manual for the details regarding antenna location The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population consult Safety Code 6 obtainable from Health Canada s website www hc sc gc ca Caution Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5 15 to 5 25GHz fre
68. file Audio Enhancements In order to apply the sound effects for your current speaker follow the steps below 1 Click Desktop and right click on the Speakers icon on the Taskbar and then select Playback devices from the sub menu 2 Select Speakers and click Properties 3 On the Enhancements tab select the sound effects you would like and click Apply Realtek HD Audio Manager You can confirm and change the audio configuration using the Realtek HD Audio Manager To launch the Realtek HD Audio Manager E Click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Realtek HD Audio Manager User s Manual 4 25 6 O When you first launch the Realtek HD adio Manager you will see two device tabs Speakers is the default out Gi device Microphone is the default input device To change the default ice click the Set Default Device button under the chosen device tab g O Information KA D Click the Information button to view hardware infor on software information and language setting L Power Management The audio controller in your computer can be turned off when the aud function is not used To adjust the configuration of audio power K management click the Power Management button 6 m When audio power management is enabled the circle button at the upper left of the Power Management is blue and convex m When audio power management is disabled the button is bla
69. formed immediately before the problem occurred Make a screenshot of the current display Please also be aware that the questions and procedures described in this chapter are meant only as a guide they are not definitive problem solving techniques In reality many problems can be solved simply but a few may require help from TOSHIBA Support if you find you need to consult others be prepared to describe the problem in as much detail as possible Preliminary checklist You should always consider the simplest solution first the items detailed in this checklist are easy to fix and yet can cause what appears to be a serious problem m Make sure you turn on all peripheral devices before you turn on the computer this includes your printer and any other external device you are using H Before you attach an external device you should first turn the computer off then when you turn the computer back on again it will recognize the new device m Make sure all optional accessories are configured properly in the computer s setup program and that all required driver software has been loaded please refer to the documentation included with the optional accessories for further information on its installation and configuration User s Manual 6 1 ee 5 O E Check all cables to ensure they be rrectly and firmly attached to the computer loose cables can ania errors E Inspect all connecting cables for loose kA and all connectors for loose pi
70. gram without shutting down the operating system or closing other programs To close a program that has stopped responding 1 Press CTRL ALT and DEL simultaneously once then click Start Task Manager The Windows Task Manager window appears 2 Select the program you want to close then click End Task Closing the failed program should allow you to continue working If it does not continue with the next step 3 Close the remaining programs one by one by selecting the program name then End Task Closing all programs should allow you to continue working If it does not power off your computer and then restart it The computer will not start Make sure you attached the AC adaptor and power cord cable properly If you are using the AC adaptor check that the wall outlet is working by plugging in another device such as a lamp Verify that the computer is on by looking at the ON OFF indicator If the indicator is glowing the computer is on Also try turning the computer off and then on If you are using an AC adaptor verify that the computer is receiving power from the external power source by looking at the DC IN Battery indicator If the indicator is glowing the computer is connected to a live external power source O O The computer will not load advayeed options during startup By holding down one of the following keys using startup your computer will load advanced options as shown below So me Key Advanced op
71. h the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected m Consult the dealer or an experienced radio TV technician for help ee GO hp Only peripherals complying with the FCC class B limits may be attached to this equipment Operation with non compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception Shielded cables must be used between the external devices and the computer s External RGB monitor port Universal Serial Bus USB 2 0 and 3 0 ports HDMI port and microphone jack Changes or modifications made to this equipment not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user s authority to operate the equipment KA FCC conditions Ks This device complies with part 15 of the FCC Rules Operation is ajo the following two conditions On 1 This device may not
72. he on screen instructions on each screen in order to properly install the operating system User s Manual 2 6 O F O L When it is displayed be sure to read the License Terms caretully To Getting to know the Start screen Or The Windows 8 Start screen provides you a new and e way to access your favorite things such as apps websites and contacts A By pointing the mouse pointer to the lower right or upper right corner of your screen you will find a list of charms with different IPES basic tasks such as turning off the power and advanced PC setti You can also find the settings and features by clicking the Desktop KA from the Start screen e For detailed information on what is new and how to operate Windows 8 Oo please refer to the Windows Help and Support Turning off the power The power can be turned off in one of the following modes either Shut Down Mode Sleep Mode or Hibernation Mode Shut Down Mode A A User s Manual When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system s main screen the next time it is turned on 1 If you have entered data either save it to the Hard Disk Drive or to other storage media Make sure all disk disc activity has stopped before removing the disc E fyou turn off the power while a disk disc is being accessed you may lose data or damage the disk E Never turn off the power while an applic
73. hines in the near surrounding area Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non approved working environments before use In the case of automobiles or aircraft the manufacturer or airline respectively should be asked for permission before use of this product Furthermore for general safety reasons the use of this product in environments with explosive atmospheres is not permitted User s Manual 1 4 G O VCCI Class B Information ay kr TORE PABBA CH ORPI FEART AP SCAB WEL TOES A CORES S PATLE DAD SRWICTEL TRANSL BEMES SSRID_EMBVET HIRSH I gt CE LU RY RU SL TCESU oe CCI B Canadian regulatory information Canada oniy This digital apparatus does not exceed the Class B limits for radio nso emissions from digital apparatus as set out in the Radio Interference gt Regulation of the Canadian Department of Communications Note that Canadian Department of Communications DOC regulations is provide that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Cet appareil num rique de la class B respecte toutes les exgences du R glement sur le mat riel brouileur du Canada Following information is only valid for EU member States
74. his key has the same function as the secondary right mouse button Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation but you are able to generate these characters using their specific ASCII codes 1 Hold down ALT key 2 Using the numeric keypad type the ASCII code of the character you require 3 Release ALT the ASCII character will appear on the display screen Wireless communications The computer s wireless communication function supports some wireless communication devices User s Manual 4 3 O A O Only some models are equipped with b i Wireless LAN and Bluetooth functions Eom E amp E Do not use the Wireless LAN Wi Fi or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields Interference from a microwave oven or other source can disrupt Wi Fi or Bluetooth operation m Turn all wireless functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device Radio waves may affect pacemaker or medical device operation possibly resulting in serious injury Follow the instruction of your medical device when using any wireless functionality E Always turn off wireless functionality if the computer is near automatic control equipment or appliances such as automatic doors or fire detectors Radio waves can cause malfunction of such equipment Or possibl
75. icate that only a few minutes of battery power remain If you continue to use the computer while the DC IN Battery indicator flashes the computer will enable Hibernation Mode so that you do not lose any data and automatically turn itself off You must recharge a battery pack when it becomes discharged User s Manual 4 9 O il User s Manual by Procedures O7 O To recharge a battery pack connect the AGadaptor to the DC IN 19V jack and plug the other end into a working outlet DC IN Battery indicator will glow amber while the battery is being charged gt Use only the computer connected to an AC power source or optional TOSHIBA Battery charger to charge the battery pack Never attempt to charge the battery pack with any other charger EL X Charging Time K The following table shows the approximate time required to fully charge discharged battery KP Battery type Power off Power on Q Battery pack about 3 hours about 12 hours 45Wh 4 cell RTC battery about 24 hours about 24 hours Please be aware that the charging time when the computer is on is affected by ambient temperature the temperature of the computer and how you are using the computer if you make heavy use of external devices for example the battery might scarcely charge at all during operation Battery charging notice The battery may not begin charging immediately under the following conditions E The battery is extremely hot or cold if the
76. ings for either the internal display or an external monitor Power On Display This option allows you to select the display to be used when the computer is started Please note that this setting is only available on standard VGA mode and is not available as part of the Windows Desktop properties Auto Selected Selects an external monitor if one is connected and the display panel is closed otherwise it selects the internal display System LCD Only Selects the internal LCD even if an external monitor is connected Boot This tab allows you to modify the boot settings Boot Priority Options This option allows you to set the priority for booting the computer Click the Up and Down buttons to adjust the priority To change the boot drive follow the steps below 1 Hold down F12 and boot the computer Release the F12 key one second after the computer is power on 2 Use the up and down cursor keys to select the boot device you want and press ENTER E f your computer does not load the Boot menu please refer to the Troubleshooting section m f a Supervisor Password has been set manual boot device selection functions may be restricted O T User s Manual O m The boot device selection methods described above will not change the boot priority settings that have been configured in TOSHIBA System Settings In addition if you press a key other than one of those listed or if the selected device is not installed
77. is installed the computer may not switch to Hibernation Mode normally by using Intel Rapid Start Technology o G O Monitoring of power conditi ty Power conditions T Qh The computer s operating capability and battery rge status are affected by different power conditions including whether an adaptor is connected and what the charge level is for that batte Le The LED in the table below refers to the DC IN Battery indicator AC adaptor connected AC adaptor not connected Battery fully charged Battery partially charged or no charge Remaining battery capacity is above low battery trigger point Remaining battery capacity is below low battery trigger point Remaining battery capacity is exhausted DC IN Battery indicator User s Manual EL Z Power on Power off no operation e Operates No charge r No charge e LED white e LED white e Operates Quick charge e Charge e LED amber e LED amber e Operates e LED off e Operates e LED flashes amber Computer shuts down Check the DC IN Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected The following indicator conditions should be noted o Go T O Pr Flashing amber m The batt rycharge is low The AC adaptor must be ae in order to recharge the battery m Indicates a problejeawith the power supply You should initially p lugging the AC ada
78. k Power in the Settings charm and then click Shut down while holding down the SHIFT key ensure that the Power indicator is off 2 Remove the AC adaptor and all cables and peripherals connected to the computer Close the display panel Turn the computer upside down and remove the battery pack 5 Loosen the screw securing the memory module cover in place please note that the screw is attached to the cover in order to prevent it from being lost 6 Slide your fingernail or a thin object under the cover and lift it off 7 Push the latches away from the module in order to release it a spring will force one end of the module up at an angle Pr User s Manual 4 17 ee O O 8 Grasp the module by its edges andemove it from the computer A A E fyou use the computer for a long time the memory modules and the circuits locating close to the memory modules will become hot In this case let them cool to room temperature before you replace them Or you will get burnt if you touch any of them E Do not touch the connectors on the memory module or on the computer Debris on the connectors may cause memory access problems K Q 3 bn Figure 4 10 Removing the memory module Product appearance depends on the model you purchased 9 Seat the memory module cover in place and secure it with the screw 1 Latches se Take care to ensure that the memory module cover is firmly
79. ke sure that the Wireless munication function is on 2 Click Desktop gt Desktop Assist gt Cohirol Panel gt Network and Internet gt Network and Sharing Center oO Click Set up a new connection or network 4 Follow the wizard You will need the name of the wiyeless network together with security settings Consult the documentation accompanied with your router or ask your wireless netwo K administrator for the settings Kor Security 2 m TOSHIBA strongly recommend that you enable encryption Q functionality otherwise your computer will be open to illegal access bY 2 an outsider using a wireless connection If this occurs the outsider Q may illegally access your system eavesdrop or cause the loss or destruction of stored data H amp TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof Card Specifications Form Factor PCI Express Mini Card Compatibility E IEEE 802 11 Standard for Wireless LANs H Wi Fi Wireless Fidelity certified by the Wi Fi Alliance The Wi Fi CERTIFIED logo is a certification mark of the Wi Fi Alliance Network Operating m Microsoft Windows Networking System Media Access mH CSMA CA Collision Avoidance with Protocol Acknowledgment ACK Radio Characteristics Radio Characteristics of Wireless LAN module may vary according to Country region where the product was purchased E Type of product Wirele
80. le the other end attaches to a desk or similar object The methods used for attaching security cables differ from product 4 23 ee O to product Please refer to the instructio s for the product you are using for more information Q gt Connecting the security lock Z amp In order to connect a security cable to the compute llow the steps as detailed below h 1 Turn the computer so its left side faces you g 2 Align the security cable with the lock slot and secure it theplace 1 Security lock slot Figure 4 14 Security lock n Q 2 Security lock Optional TOSHIBA Accessories You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use For reference the following list details some of the items that are available from your reseller or TOSHIBA dealer Memory Kit Universal AC Adaptor Battery pack DDR3 1333 1600 memory modules can easily be installed in the computer The available option memory depends on TOSHIBA authorization If you frequently use your computer at more than one site it may be convenient to purchase an additional AC adaptor to be kept at each site in order to remove the need to always carry the adaptor with you An additional battery pack can be purchased for use as either a spare or replacement Please refer to the Battery section for further information Sound System and Video mode This section describes som
81. load the operating system and all other files and data If you are still unable to resolve the problem contact TOSHIBA Support For further information please refer to Operating Basics Problem Memory media card error occurs Procedure Remove the memory media card from the computer and then reinsert it in order to ensure it is firmly connected If the problem persists then you should refer to the documentation supplied with your memory media card for further information O os Problem Procedure You cannot write to Remove the memory edia card from the a memory media computer and check to fisure that it is not write card protected to You cannot read a Check to ensure the required i is actually on the file memory media card that is inser a the computer If you are still unable to resolve the rit contact TOSHIBA Support ae O Pointing device If you are using a USB mouse you should also refer to both the USB Oa mouse section and the documentation supplied with your mouse Touch Pad Problem Procedure The Touch Pad does Check the Device Select settings not work Click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse Pressing function keys to enable On screen pointer In this instance the system might be busy Try does not respond to moving the mouse again after waiting a short pointing device while operation Double tapping In this instance you should initially
82. m Sleep Mode depending on the external devices connected to the USB ports For example if a mouse or USB keyboard connected to a USB port clicking the mouse O button or pressing the keyboard will wakeup the 7 computer p O TOSHIBA Password utility The TOSHIBA Password utility provides two levels of password security User and Supervisor 7 Passwords set by the TOSHIBA Password utility function are different from J the Windows password User Password To start the utility click the following items Desktop gt Desktop Assist gt Tools amp Utilities gt User Password User authentication may be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords etc E Set button Click this button to register a password After a password is set you will be prompted to enter it when you start the computer 3 After you set the password a dialog box will be displayed asking J whether you want to save it to a media If you forget the password you can open the password file on another computer Be sure to keep the media in a safe place E When entering the character string to register the password enter from the keyboard character by character and do not enter as ASCII code or copy and paste the character string In addition ensure that the registered password is correct by outputting the character string to the password file amp When entering a password do not enter an
83. mory media card inserting 4 21 removing 4 21 Memory media slot 4 18 Moving the computer 4 27 MultiMediaCard removing 4 21 Password power on 5 4 h R O Starting the computer by password 5 7 ag 5 6 Pointing Device Touch Paty 2 Power Gy conditions 3 12 Hibernation Mode k O panel on off 5 4 en Shut Down mode 2 7 6 Sleep Mode 2 8 turning off 2 7 turning on 2 6 Problems AC power 6 5 Analyzing the problem 6 2 Battery 6 5 Bluetooth 6 15 External monitor 6 13 Hardware and system checklist 6 4 HDD 6 8 Internal display panel 6 7 Keyboard 6 7 LAN 6 14 6 15 Memory Media Card 6 8 Overheating power down 6 4 Pointing device 6 9 Power 6 4 Real Time Clock 6 7 Sound system 6 13 TOSHIBA support 6 15 Touch Pad 6 9 USB device 6 11 USB mouse 6 10 Wireless LAN 6 15 Recovery hard disk drive 5 18 Index 2 ee O Recovery Media 5 17 5 19 a problems 6 15 Restarting the computer 2 8 KA S K O SD SDHC SDXC Card Ly formatting 4 20 4 note 4 19 Security lock 4 23 Q2 Sleep Mode co setting 2 8 6 System automatic 5 4 Sound system problems 6 13 TOSHIBA Desktop Assist 5 1 TOSHIBA PC Diagnostic Tool 5 1 USB device problems 6 11 Video mode 4 26 Video RAM 3 9 W Web Camera 3 7 Wireless communication 4 3 Wireless LAN User s Manual Index 3
84. munication please refer to Operating Basics Problem Procedure Cannot access Check to ensure the computer s Wireless Bluetooth device Communication function is on Check to ensure the Bluetooth Manager application is running on the computer and that power to the external Bluetooth device is turned on Check to ensure that no optional Bluetooth Adaptor is installed in the computer the built in Bluetooth hardware cannot operate simultaneously with another Bluetooth controller If you are still unable to resolve the problem contact TOSHIBA Support TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer you may need to contact TOSHIBA for additional technical assistance User s Manual 6 15 _ py Before you call ga Some problems you experience may be elle to software or the operating system so it is important that you investigate other sources of assistance first Before contacting TOSHIBA try following Review troubleshooting sections in the documeffation supplied with your software and or peripheral devices If a problem occurs when you are running software applications consult the software documentation for troubleshooting syggestions and consider calling the software company s technical sup department for assistance Consult the reseller or dealer from where you purchased your 2 computer and or software they are your best re
85. n observe the following Never cover your computer or AC adaptor with any object E Never place your computer or AC adaptor near a heat source such as an electric blanket or heater m Never cover or block the air vents including those located at the base of the computer Always operate your computer on a hard flat surface Using your computer on a carpet or other soft material can block the vents m Always provide sufficient space around the computer H Overheating your computer or AC adaptor could cause system failure computer or AC adaptor damage or a fire possibly resulting in serious injury Creating a computer friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using such as a printer Leave enough space around the computer and other equipment to provide adequate ventilation Otherwise they may overheat User s Manual 1 11 O O To keep your computer in prime operatig condition protect your work area O from oO E Dust moisture and direct sunlight E Equipment that generates a strong electro netic field such as stereo speakers other than speakers that i i to the computer or speakerphones m Rapid changes in temperature or humidity and soues of temperature change such as air conditioner vents or heaters m Extreme heat cold or humidity z L Liquids and corrosive chemicals KA re 0 Stress injury 0 Carefully read
86. n Mohimecia Interface and the HDMI Logo are trademarks or registered trade OS of HDMI Licensing LLC in the United States and other countries SRS and SRS logo are trademarks or registered re rks of SRS Labs Inc SRS technology is incorporated under license from 291 Labs Inc TouchPad is a trademark of Synaptics Inc can Wi Fi is a registered trademark of the Wi Fi Alliance ae Secure Digital and SD are trademarks of SD Card Association C gt MultiMediaCard and MMC are trademarks of MultiMediaCard Associati sMedio and sMedio TrueLink are trademarks or registered trademarks o S2 sMedio Inc QUALCOMM is a trademark of Qualcomm Incorporated registered in the United States and other countries ATHEROS is a trademark of Qualcomm Atheros Inc registered in the United States and other countries Realtek is a registered trademark of Realtek Semiconductor Corporation Other trademarks and registered trademarks not listed above may be used in this manual Regulatory Information FCC information User s Manual FCC notice Declaration of Conformity Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance wit
87. n System Part of the main system memory may be use by the graphics system for graphics performance and therefore reduce t mount of main system memory available for other computing activities The amount of main system memory allocated to support graphics may ay depending on the graphics system applications utilized system memory size and other factors If your computer is configured with more than 3 GB memory the memory might be displayed as approximately 3 GB only depending on tHe computer s hardware specifications Q This is correct because the operating system usually displays the avatidple memory instead of the physical memory RAM built into the computer os Various system components like the video adapter s GPU and PCI 6 devices like Wireless LAN etc require their own memory space Since a 32 bit operating system cannot address more than 4 GB of memory these system resources overlap the physical memory It is a technical limitation that the overlapped memory is not available to the operating system Even though some tools might display the actual physical memory built into your computer the memory available to the operating system will still be approximately 3 GB only Computers configured with a 64 bit operating system can address 4 GB or more of system memory Battery Life Battery life may vary considerably depending on product model configuration applications power management settings and features utilize
88. n the E the BIOS setup utility will load Select Power Management Enable Disable Intel R Rapid Start Technology function 0 You can select the period of time from Sleep Mode to Hibernation qs Mode using Rapid Start Entry after If the Immediately option is S selected the computer will switch to Hibernation Mode immediately after your computer goes into the Sleep Mode When Intel Rapid Start Technology is enabled switching from Sleep Mode to Hibernation Mode consumes power When you carry your computer aboard on an aircraft or in places where electronic devices are regulated or controlled always power off your computer When Intel Rapid Start Technology is enabled Wake up on LAN Wake up on USB or Wake up from Sleep Mode automatically functions are not available when the computer has been switched from Sleep Mode to Hibernation Mode The Windows cannot be restored normally if the battery is exhausted when the computer is moving from Sleep Mode to Hibernation Mode The partition allocation on the Solid State Drive for the Intel Rapid Start Technology cannot be deleted even if Intel Rapid Start Technology is disabled Intel Rapid Start Technology can be used only for Windows 8 Intel Rapid Start Technology cannot be used in models that do not equipped with a Solid State Drive The Windows restore time from Hibernation Mode depends on the amount of system memory used in the computer After an additional memory module
89. nd 2 In the Playback tab select the playback device which you want to switch to 3 To use the internal speakers on your computer select Speakers To use the television or the external monitor that you have connected to the computer select a different playback device 4 Click the Set Default button if it is available 5 Click OK to close the Sound dialog 6 Settings for display video on HDMI To view video on the HDMI display device be sure to configure the following settings otherwise you may find that nothing is displayed Be sure to use the function key to select the display device before starting to play video Do not change the display device while playing video Do not change the display device under the following conditions E While data is being read or written While communication is being carried out Select HD Format To select the display mode follow the steps as detailed below Click Desktop gt Desktop Assist gt Control Panel Click Appearance and Personalization Click Display Click Change display settings Click Advanced settings Click List All Modes Select one of the mode at List All Modes NOaARWN gt Security lock User s Manual A security locks enable you to anchor your computer a desk or other heavy object in order to help prevent unauthorized removal or theft The computer has a security lock slot on its right side into which you can attach one end of the security cable whi
90. nforms you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment User s Manual 1 23 ee O DN a Please read A note is a hint or advice that helps you make best use of your equipment Z A o User s Manual 1 24 Chapter 2 fo Getting Started en This chapter provides an equipment checklist and basic info ion to start using your computer Yop Some of the features described in this manual may not function properly if you use an operating system that was not pre installed by TOSHIBA O Oa Equipment checklist Carefully unpack your computer taking care to save the box and packaging materials for future use Hardware Check to make sure you have all the following items m TOSHIBA Portable Personal Computer H Battery pack Is preinstalled in some computers AC adaptor and power cord 2 pin plug or 3 pin plug Documentation E U940 Quickstart H Instruction Manual for Safety and Comfort g Warranty information If any of the items are missing or damaged contact your dealer immediately Conventions This manual uses the following formats to describe identify and highlight terms and operating procedures HDD or Hard disk Some models are equipped with a Solid State drive Drive SSD instead of a hard disk drive In this manual the word HDD or Hard disk drive also refers to the SSD unless otherwise stated User s Manual 2 1 ec O
91. ng advanced recovery tools from Control Panel please also make sure to use the default Boot Mode option UEFI Boot in the BIOS setup utility before restoring Load the Recovery Media into the external Optical Disc Drive or insert the recovery USB Flash Memory into one available USB port Turn off the computer s power While holding down the F12 key on the keyboard turn on your computer Release the F12 key one second after the computer is power on eS O 4 Use the up and down cursor ke tos lect the appropriate option from the menu according to your actual r ery media Please refer to the Boot Priority Options section for furthefQprmation 5 A menu will be displayed from which you SPouid follow the on screen instructions A m f your computer does not load the Boot menu please refer to the Troubleshooting section amp When drivers utilities are installed you can setup the respective drivers utilities from the following place To open the setup files Click Desktop gt Desktop Assist gt All Programs gt TOSHIBA gt Applications and Drivers TOSHIBA Media Player by sMedio TrueLink application is not included in the setup files above but can be downloaded from d 8 Windows Store If you have previously chosen to remove the recovery partition and are trying to create Recovery Media you will see the following message The Recovery Media Creator can not be launched because there is no recovery partition When the
92. ng again If the battery still does not charGs you should check that the power outlet the AC adaptor is connected to its supplying power this can b tested by plugging another appliance into it Check whether the battery is hot or col the touch if so it will not charge properly an Aould be allowed to reach room temperature befor try again O Unplug the AC adaptor and remove the battery to S make sure its connecting terminals are clean if Q necessary wipe them with a soft dry cloth lightly dipped in alcohol Connect the AC adaptor and replace the battery taking care to ensure that it is securely seated in the computer Check the DC IN Battery indicator if it does not glow allow the computer to charge the battery for at least twenty minutes If the DC IN Battery indicator starts to glow after this period allow the battery to continue to charge for at least another twenty minutes before turning on the computer However if the indicator still does not glow the battery may be at the end of its operating life and should be replaced However if you do not believe the battery is at the end of its operating life you should speak to TOSHIBA Support Battery doesn t If you frequently recharge a partially charged power the computer battery the battery might not charge to its full as long as expected potential in these instances you should fully discharge the battery and then attempt to charge it again Check
93. nitor Software Notice amp Acceptance screen Please carefully read the information displayed Selecting ACCEPT and clicking OK will enable the program By enabling the TOSHIBA PC Health Monitor software you agree with these terms and conditions and to the use and sharing of the collected information Once the program is enabled the TOSHIBA PC Health Monitor screen is displayed and the program will begin monitoring system functions and collecting information A message will be displayed if any changes which may interfere with the operation of the program are detected Follow the instructions displayed on screen in the message ee oS System Recovery There is a hidden partition allocated on the d Disk Drive for the System Recovery Options in the event of a problem Q You can also create recovery media and restore Raysystem The following items will be described in this section h H Creating Recovery Media L Restoring the pre installed software from your created Recovery Media Q m Restoring the pre installed software from the Recovery Har k Drive Q oy Creating Recovery Media eZ This section describes how to create Recovery Media i User s Manual E Be sure to connect the AC adaptor when you create Recovery Media Be sure to close all other software programs except the Recovery Media Creator Do not run software such as screen savers which can put a heavy load on the CPU Operate the compu
94. nnect external devices after turning OFF of the computer If this function can not be still used change the setting to disable the function and stop using this function If Sleep and Charge function is enabled the computer s battery will discharge during hibernation or when the computer is turned off Connect the AC adaptor to the computer or disable the Sleep and Charge function Some external devices may not work when connected to a compatible port if the Sleep and Charge function is enabled Reconnect the external device after turning the computer ON If the external device still does not work connect device to an USB port that does not have the Sleep and Charge function or change to disable the Sleep and Charge function O Problem The USB Wakeup function does not work Sound system Or Procedure When Sleep and cha e function is enabled the USB WakeUp functi oes not work for ports that support the Sleep an harge function In that case use an USB porting does not have the USB Sleep and Charge fun or change to disable Sleep and Charge function Lh z Q K In addition to the information in this section please also refer to the 6 documentation supplied with your audio device 8 Problem No sound is heard Annoying sound is heard External monitor Procedure Op Press the function keys to increase or decrease volume Check the software volume settings Please check to see if M
95. ns m Check that your disc media is correctly load Always try to make detailed notes of your pecan d keep them ina permanent error log this will help you to describe your lems to TOSHIBA Support In addition if a problem recurs the log you have made will help to identify the problem faster K A Analyzing the problem C gt User s Manual Sometimes the computer will give you clues that can help you identify it is malfunctioning In view of this you should keep the following questions SA in mind Q Which part of the computer is not operating properly keyboard Hard Disk Drive display panel Touch Pad Touch Pad control buttons as each device will produce different symptoms m Check the options within the operating system to ensure that its configuration is set properly What appears on the display Does it display any messages or random characters Make a screenshot of the current display and if possible look up the messages in the documentation included with the computer software or operating system B Check that all connecting cables are correctly and firmly attached as loose cables can cause erroneous or intermittent signals H Do any indicators light if so which ones what color are they and do they stay on or blink Write down what you see m Do you hear any beeps if so how many are they long or short and are they high pitched or low pitched In addition is the computer making any unusual noises Write down wha
96. nstalled in the computer before attempting to charge the battery pack Improper installation could generate smoke or fire or cause the battery pack to rupture m Keep the battery pack out of reach of infants and children It can cause injury w on AN E The lithium ion battery pack can explode if not replaced used Y handled or disposed of properly Dispose of the battery as required by e local ordinances or regulations Use only batteries recommended by TOSHIBA as replacements E The computer s RTC battery should be replaced only by your dealer or by a TOSHIBA service representative The battery can explode if not properly replaced used handled or disposed Dispose of the battery as required by local ordinances or regulations E Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius Otherwise the electrolyte solution might leak battery pack performance might deteriorate and the battery life might be shortened E Never install or remove the battery pack without first turning off the power and disconnecting the AC adaptor Never remove the battery pack while the computer is in Sleep Mode Data could be lost 1 Never remove the battery pack while the Wake up on LAN function is J enabled Data will be lost Before you remove a battery pack disable the Wake up on LAN function Charging the batteries When the power in the battery pack becomes low the DC IN Battery indicator will flash amber to ind
97. of its protruding elements 4 27 ee py Heat dispersal T User s Manual To protect against overheating the procestyts equipped with an internal temperature sensor which activates a cooling f t or lowers the processing speed if the computer s internal temperature rise a certain level You are able to select whether to control this temperature by either turning on the fan first then if necessary lowering the processor peed or by lowering the processor speed first then if necessary turning on th Both of these functions are controlled through the Power Options 7 When the processor s temperature falls within normal range th fgn will be turned off and the processor operation returned to its standard spega gt If the processor s temperature reaches an unacceptably high level with either setting the computer automatically shuts down to prevent any damage In this instance all unsaved data in memory will be lost 6 4 28 Chapter 5 Utilities and Advanced ie This chapter describes the utilities and special features of KA puter and the advanced usage of some utilities x pee Ks Utilities and Applications This section describes the pre installed utilities that come with the K computer and details how to start them For further information on their Oo operation you may refer to each utility s online manual help files or README TXT file if applicable All the utilities described here can be ac
98. ogy as defined by the Bluetooth Special interest Group Please note that it is not possible to confirm the operation of all functions of all Bluetooth devices that are available In view of this it may be noted that some functions associated with a specific device might not operate properly CAUTION about Wireless Devices A User s Manual The wireless devices have not completed verification of connection and operation with all devices which are using the Wireless LAN or Bluetooth radio technology Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another If you use Bluetooth and Wireless LAN devices simultaneously you may occasionally experience a less than optimal network performance or even lose your network connection O O If you should experience any such problem immediately turn off either one of your Bluetooth or Wireless LAN Please visit http Avww pc support global toshiba com if you have any questions about using Wireless LAN or Bluetooth Card from TOSHIBA In Europe visit http Avww toshiba europe com computers tnt bluetooth htm Your Bluetooth product is not compatible with devices using Bluetooth Version 1 0B specifications 2 Ve 2 Wireless products like other radio devices emit radio frequency O electromagnetic energy The level of energy emitted by Wireless products 3 however is far much less than the electromagnetic energy emitted by
99. ove copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 Ifyou include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tih cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF O USE DATA OR PROFITS OR cusihiggs INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF L ITY WHETHER IN CONTRACT STRICT LIABILITY OR TOR CLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY O THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POS BILITY OF SUCH DAMAGE The licence and distribution terms for any pu
100. owing benefits H Saves data to the Hard Disk Drive when the computer automatically shuts down because of a low battery condition You can return to your previous working environment immediately when you turn on the computer E Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature Allows the use of the panel power off feature Starting Hibernation Mode To enter Hibernation Mode follow the steps below 1 Click the Settings charm 2 Click Power and then select Hibernate In order to show Hibernate in Power menu you need to setup according to the following steps ee O User s Manual O 1 Click Desktop gt Desktop Assist gt Control Panel gt System and Security gt Power Options 2 Click Choose what the power button does or Choose what closing the lid does 3 Click Change settings that are currently unavailable 4 Select the Hibernate check box from Shutdown settings 5 Click the Save changes button Z ee ee Automatic Hibernation Mode Q 4 The computer can be configured to enter Hibernation Mode automatical when you press the power button or close the lid In order to define these 4 settings you can follow the steps as described below Q 1 Click Power Options and then click Choose what the power button does or Choose what closing the lid does 2 Enable the desired Hibernation Mode settings for When
101. ows the position of the CAPS LOCK indicator and the NUM LOCK indicator which show the following conditions m When the CAPS LOCK indicator glows the keyboard will produce capitals when any letter is typed Figure 4 1 Keypad indicators 1 CAPS LOCK indicator CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format User s Manual 4 1 O gt Function Key The function keys F1 F12 are the twelve a the top of your keyboard T User s Manual The FN key is used in combination with other keys to forr2s keys Soft keys are key combinations that enable disable or tho cific features Please note that some software may disable or interfere with soft key operations and that the soft key settings are not restored when the computer returns from Sleep Mode You can configure the Function Keys Mode by selecting the Special function mode or Standard F1 F12 mode Please refer to the TOSHIBA System Settings section Function keys let you enable or disable certain features of the computer The functions can be performed by pressing the associated functions keys Special Standard F1 Function function mode F12 mode F1 FN F1 Launches the help file supplied with the software F2 FN F2 Decreases the computer s display panel brightness in individual steps F3 FN F3 Increases the computer s display panel brightness in individual steps F4 FN F4 Changes
102. pe a JA Restrictions for Use of 2400 0 2483 5Mtits Frequencies in Europe Q France Outdoor use Military Ra iolocation limited to 10mW _ use Refar one the 2 4GHz band e i r p within the has been ong in recent years to band allow current digg regulation Full 2454 2483 5MHz implementation pla ned 2012 Italy For private use a generap authorization is required as RLAN s are used outside ow premises For public use a gendo authorization is required Q Luxembourg Implemented General authorization required for network and service supply Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny Alesund Russian Only for indoor applications Federation Restrictions for Use of 5150 5350MHz Frequencies in Europe Italy For private use a general authorization is required if WAS RLAN s are used outside own premises Luxembourg Implemented General authorization required for network and service supply User s Manual 1 15 O h Russian Limited p 100mW Permitted to use Federation on indoor applications closed industf l and warehouse areas and on aircraft ar 1 pei use for local networks of aircraft crew service com wWnications on board aircraft in irea of the airport and at all stages of flight 2 Permitted to use for pu wireless access local netw on board aircraft during a flight at the altitude not less than 6 3000m o Res
103. pending on the model you purchased ee O Environmental Requirements 0 7 Conditions Ambient temperature Relative humidity Operating 5 C 41 F to 35 C apy to 80 95 F igondensing Non operating 20 C 4 F to 60 C 10 t amp 9 140 F noncon nsing Wet bulb temperature 29 C maximum Qoy G 2 Conditions Altitude from sea level K Operating 60 to 3 000 meters Q Non operating 60 to 10 000 meters maximum Power Requirements AC adaptor 100 240V AC 50 or 60 Hz cycles per second Computer 19V DC AC Power Cord and Connectors User s Manual The power cord s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country region in which it is used All cords must meet the following specifications Wire size Minimum 0 75 mm Current rating Minimum 2 5 amperes Certification agencies China CQC U S and Canada UL listed and CSA certified No 18 AWG Type SVT or SPT 2 3 14 User s Manual Australia AS Japan DENANHO Europe Austria OVE Belgium CEBEC Denmark DEMKO Finland FIMKO France LCIE Germany VDE Wy Italy 7 os IMQ The Netherlands KEMA Norway NEMKO Sweden SE Switzerland sar United Kingdom BSI K 3 Q In Europe two conductors power cord must be VDE type HO5VVH2 F or HO3VVH2 F and for three conductors power cord must be VDE type HOSVV F For the United States
104. ptor into another p r outlet if it still does not operate property yu should contact your reseller or dea y Amber Indicates the AC adaptor is conneciehignd the battery is charging a White Indicates the AC adaptor is connected and battery is fully charged No light Under any other conditions the indicator does i S not light If the battery pack becomes too hot while it is being charged the charge will stop and the DC IN Battery indicator will go out When the battery pack s temperature falls to a normal range charging will resume this process will occur regardless of whether the computer s power is on or off Power indicator Check the Power indicator to determine the power status of the computer the following indicator conditions should be noted White Indicates power is being supplied to the computer and the computer is turned on Flashing amber Indicates that the computer is in Sleep Mode and that there is sufficient power available AC adaptor or battery to maintain this condition In Sleep Mode this indicator will turn on for one second and off for two seconds No light Under any other conditions the indicator does not light Specifications This section summarizes the computer s technical specifications Physical Dimensions User s Manual Size Approximately 340 w x 238 d x 21 h millimeters not including parts that extend beyond the main body The physical dimensions may vary de
105. quency range Taiwan Article 12 Without permission granted by the NCC any company enterprise or user is not allowed to change frequency enhance transmitting power or alter original characteristic as well as performance to an approved low power radio frequency devices User s Manual O Article 14 The low power o frequency devices shall not influence aircraft rjty and interfere legal communications Q If found the user shall ced e operating immediately until no interfe e is achieved The said legal communications faeans radio communications is operated in compliance with the Telecommunications Act The low power radio frequency devices yst be susceptible with the interference from legake communications or ISM radio wave radiated 6 i O devices on Ls 6 Q Using this equipment in Japan In Japan the frequency bandwidth of 2 400MHz to 2 483 5MHz for second generation low power data communication systems such as this equipment overlaps that of mobile object identification systems premises radio station and specified low power radio station 1 Important notice The frequency bandwidth of this equipment may operate within the same range as industrial devices scientific devices medical devices microwave ovens licensed radio stations and non licensed specified low power radio stations for mobile object identification systems RFID used in factory production lines Other Radio Stations 1 Before using thi
106. r and then reconnect it to a free USB port in order to ensure it is firmly attached In this instance you should initially try changing the double click speed setting within the Mouse Control utility 1 To access this utility click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse 2 Within the Mouse Properties window click the Buttons tab 3 Set the double click speed as required and click OK O i Problem Procedure The on screen In this instance yore uld initially try changing pointer moves too the speed setting with Mouse Control utility fast or too slow 1 To access this utility Glick Desktop gt Desktop Assist gt Contfol Panel gt Hardware and Sound gt mo 2 Within the Mouse Properties indow click the Pointer Options tab bh 3 Set the pointer speed as required MO jck OK C The on screen The elements of the mouse responsible for pointer moves detecting movement might be dirty please refer cn erratically the documentation supplied with the mouse for 3 a instructions on how to clean it If you are still unable to resolve the problem contact TOSHIBA Support USB device In addition to the information in this section please also refer to the documentation supplied with your USB device Problem Procedure USB device does not Remove the USB device from the computer and work then reconnect it to a free port in order to ensure it is firmly attache
107. rated on battety power and you may not be able to increase the brightness of the screen Lh L Graphics Processing Unit GPU YS Graphics processing unit GPU performance may vary depending Ow product model design configuration applications power management E settings and features utilized GPU performance is only optimized when 5 operating in AC power mode and may decrease considerably when 3 operating in battery power mode Total Available Graphics Memory is the total of as applicable Dedicated Video Memory System Video Memory and Shared System Memory Shared System Memory will vary depending on system memory size and other factors Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment obstacles access point design and configuration and client design and software hardware configurations The actual transmission speed will be lower than the theoretical maximum speed Copy Protection Applicable copy protection standards included in certain media may prevent or limit recording or viewing of the media Messages Messages are used in this manual to bring important information to your attention Each type of message is identified as shown below Indicates a potentially hazardous situation which could result in death or serious injury if you do not follow instructions AN Pay attention A caution i
108. re 2 4 Opening the display panel 1 Display panel AN Use reasonable care when opening and closing the display panel Opening it vigorously or slamming it shut could damage the computer 7 Be careful not to open the display panel too far as this could put stress J on the display panel s hinges and cause damage amp Do not press or push on the display panel E Do not lift the computer by the display panel User s Manual 2 5 O Do not close the display panel with pens or any other objects left in between the display panel and the keyboard When opening or closing the display panel place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel Do not use excessive force when opening or closing the display panel Turning on the power This section describes how to turn on the power the Power indicator will then indicate the status Please refer to the Monitoring of power condition section for more information J E After you turn on the power for the first time do not turn it off until you l have set up the operating system E Volume cannot be adjusted during Windows Setup 1 Open the display panel 2 Press and hold the computer s power button for two or three seconds Figure 2 6 Turning on the power 1 Power button Initial setup The Windows 8 Startup Screen will be the first screen displayed when you turn on the power Follow t
109. re is no recovery partition the Recovery Media Creator cannot make Recovery Media However if you have already created a Recovery Media you can use it to restore the recovery partition If you have not created Recovery Media please contact TOSHIBA support for assistance Restoring the pre installed software from the Recovery Hard Disk Drive User s Manual A portion of the total Hard Disk Drive space is configured as a hidden recovery partition This partition stores files which can be used to restore pre installed software in the event of a problem If you subsequently set up your Hard Disk Drive again do not change delete or add partitions in a manner other than specified in the manual otherwise you may find that space for the required software is not available In addition if you use a third party partitioning program to reconfigure the partitions on your Hard Disk Drive you may find that it becomes impossible to setup your computer Make sure the AC adaptor is connected during the restoring process by When you reinstall the Windows operating system the hard disk may be reformatted and all data may be lost Ta Turn off your computer to 2 While holding down 0 zero key on the ayporaarn on your computer Release the 0 zero key one second after the computer is power on 4 3 A menu will be displayed from which you should follow thg on screen instructions Oy If your computer does not load the Recove
110. rrectly three times in a row or if you don t enter the password within 1 minute the computer shuts off In this case some features that can power on the computer automatically Wake up on LAN Task Scheduler etc may not work You must turn the computer back on to retry password entry TOSHIBA System Settings T This section explains how to use the TOSHIBA System Settings to configure your computer and provides information on settings for various functions The settings or options explained here may vary depending on the model you purchased After you changed the settings a dialog box may appear to prompt you that the changes will take effect after the computer is restarted Make sure to restart your computer immediately to apply these changes Accessing TOSHIBA System Settings To run TOSHIBA System Settings click Desktop gt Desktop Assist gt Tools amp Utilities gt System Settings TOSHIBA System Settings window User s Manual The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured O T User s Manual O In addition there are also three buttons 49K Cancel and Apply ra OK Accepts your chaiges and closes the TOSHIBA System Settings widow Cancel Closes the window with t accepting your changes Apply Accepts all your changes withddt closing the TOSHIBA System Settings window ae Some options shown in grey are possible to confirm
111. ry options please refer to the Troubleshooting section ka You can also perform the restoration through PC settings in the operating Oa system 1 Click the Settings charm and click Change PC settings 2 Click General under PC settings 3 Select the options you desired and follow the on screen instructions Ordering Recovery Discs from TOSHIBA T User s Manual You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop Please note that this service is not free of charge 1 Visit https backupmedia toshiba eu on the Internet 2 Follow the on screen instructions You will receive your Recovery Discs within two weeks after placing your order Chapter 6 Troubleshooting EN TOSHIBA have designed this computer for durability ME ould problems occur you are able to use the procedures detailed in t aome to help determine the cause All users should become familiar with this chapter as knowing what hs go wrong can help prevent problems from occurring in the first place Gy Problem solving process Resolving problems will be much easier if you observe the following guidelines E Stop immediately when you recognize a problem exists as taking further action may result in data loss or damage or you may destroy valuable problem related information that can help solve the problem m Observe what is happening write down what the system is doing and what actions you per
112. s equipment ensure that it does not interfere with any of the equipment listed above 2 Ifthis equipment causes RF interference to other radio stations promptly change the frequency being used change the location of use or turn off the source of emissions 3 Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations 2 Indication for Wireless LAN The indication shown below appears on this equipment DOOM aan 2ADS OF 4 m 1 2 4 This equipment uses a frequency of 2 4GHz 2 DS This equipment uses DS SS modulation 3 OF This equipment uses OFDM modulation O O 4 4 The interference range of this ipment is less than 40m 5 This equipment uses a fre yency bandwidth from 2 400MHz to 2 483 5MHz It is possible to avoid t and of mobile object identification systems Cn Cr O 3 Indication for Bluetooth K h The indication shown below appears on this equipment 4 D 2 4FH1 A 1 2 4 This equipment uses a frequency of 2 4 GHZ 6 2 FH This equipment uses FH SS modulation ee 3 1 The interference range of this equipment is less than 10 m 6 4 tT This equipment uses a frequency bandwidth from 2 400 MHz to 2 483 5 MHz It is impossible to avoid the band of mobile object identification systems 4 About the JEITA 5GHz Wireless LAN supports W52 W53 W56 Channel IEEE802 11b g n IEEE80
113. s internal T speakers and microphone as well as allowing an external microphone and headphones to be connected via the appropriate jacks User s Manual 3 3 O O 4 sw Memory media slot This slot lets yotinsert an SD SDHC SDXC memor miniSD microSD Card and MultiMedi rd Refer to the Memory media section 51 more information A AN Keep foreign metal objects such as screws staples and paper clips out of the Memory media slot Foreign metal objects can create a short circuit which can cause damage and fire possibly resulting in serious injury T Universal Serial Bus Two Universal Serial Bus ports which cory to USB 3 0 ports the USB 3 0 standard are provided on the oh side of the computer Cn The USB port type may vary depending on the S4 model you purchased The Port with blue color is USB 3 0 port The USB 3 0 port is compliant with USB 3 0 standard and backward compatible with USB 2 0 devices The port with the icon has Sleep and Charge function 7 USB 3 0 port s may work as USB 2 0 port s when operating in USB J Legacy Emulation mode Horm HDMI out port HDMI out port can connect with Type A connector HDMI cable a LAN jack This jack lets you connect to a LAN The adaptor has built in support for Ethernet LAN 10 megabits per second 10BASE T Fast Ethernet LAN 100 megabits per second 100BASE TX Refer to Operating Basics for details AN E Do not connect any cable other
114. s product includes software written by Tim Hudson tjh cryptsoft com Original SSLeay License User s Manual 1 8 User s Manual O gt e Q7 Copyright C 1995 1998 Eric Young i eryptsoft com All rights reserved GY This package is an SSL implementation written by Eyic Young eay cryptsoft com The implementation was written so as to conform with N jscapes SSL This library is free for commercial and non commercial use As long as the following conditions are aheared to The following conditions afii to all code found in this distribution be it the RC4 RSA Ihash DES ode not just the SSL code The SSL documentation included with this 9 distribution is covered by the same copyright terms except that the hos is Tim Hudson tjh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the Gs code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the ab
115. sMedio TrueLink Manual The features and operations about TOSHIBA Media Player are explained in the TOSHIBA Media Player Manual Use the following procedure to open TOSHIBA Media Player Manual Click the Tutorials icon on the Start Page of TOSHIBA Media Player TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption battery health and the system cooling informing you of significant system conditions This application recognizes the system and individual component serial numbers and will track specific activities related to the computer and their usage The collected information includes device operation time and number of actuations or status changes i e number of power button and FN key combination uses AC adaptor battery LCD fan HDD sound volume wireless communication functionalities and USB information date of initial system use and also computer and device usage i e power settings battery temperature and recharging CPU memory backlight illumination time and temperatures for various devices The stored data uses a very User s Manual 5 14 5 O small portion of the total hard disk capadily approximately 10MB or less per year Q gt This information is used to identify and provide otification of system conditions which may effect the performance o your TOSHIBA computer It may also be used to help diagnose problems sho
116. source for current KA information and support S4 TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware related write to TOSHIBA at a location listed in the enclosed warranty booklet or visit TOSHIBA technical support website http www toshiba europe com or http www toshiba co jp worldwide User s Manual Index User s Manual AC adaptor additional 4 24 connecting 2 3 DC IN 19V jack 3 4 Battery extending life 4 12 monitoring capacity 4 11 real time clock 3 9 4 8 save mode 5 4 types 4 8 Battery pack replacing 4 13 Bluetooth problems 6 15 Boot Priority 5 10 Cleaning the computer 4 27 Cooling vents 3 3 3 5 DC IN indicator 3 1 DC IN Battery indicator Display automatic power off 5 3 Q es 3 7 cog 2 5 scree Bf Dy Display aes Documentation list K Dual Pointing Device KN Touch Pad 6 9 Sj 3 Q Equipment checklist 2 1 External monitor problems 6 14 Function Key 4 2 Function keys 5 3 Hard Disk Drive 3 9 Hard disk drive automatic power off 5 3 HDMI out port 3 4 Heat dispersal 4 28 5 4 HW Setup accessing 5 7 Boot 5 10 display 5 10 general 5 8 keyboard 5 12 Index 1 o O G User s Manual LAN 5 12 SATA 5 12 USB 5 12 window 5 7 Keyboard Function keys F1 F12 4 2 problems 6 7 Windows special keys 4 3 LAN cable types 4 7 connecting 4 7 problems 6 14 Memory installing 4 15 removing 4 17 me
117. ss communication is often subject to local radio regulations Although Wireless LAN wireless networking products have been designed for operation in the license free 2 4GHz and 5GHz band local radio regulations may impose a number of limitations to the use of wireless communication equipment Radio Frequency E Band 5GHz 5150 5850 MHz Revision a and n E Band 2 4GHz 2400 2483 5 MHz Revision b g and n o G O The range of the wireless signal is relat6cpto the transmit rate of the wireless communication Communication at lower transmit range may travel larger distances Qa E The range of your wireless devices can be cted when the antennas are placed near metal surfaces an id high density materials m Range is also impacted due to obstacles in the sia path of the radio that may either absorb or reflect the radio signa H L Bluetooth wireless technology oy Q Some computers in this series have Bluetooth wireless communications function which eliminates the need for cables between electronic device such as computers printers and mobile phones When it is enabled a Bluetooth provides the wireless personal area network environment which O is safe and trustworthy that is quick and easy You cannot use the computer s built in Bluetooth functions and an external Bluetooth adaptor simultaneously For reference Bluetooth wireless technology has the following features Worldwide operation The Bluetooth radio transmitter and rec
118. t you hear Record your observations so you can describe them in detail to TOSHIBA Support Software The problems may be caused by your software or disk If you cannot load a software package the media may be damaged or the program might be corrupted in these instances try loading another copy of the software if possible If an error message appears while you are using a software package you should refer to the documentation supplied with it as this will usually include a problem solving section or a summary of error messages Next you should check any error messages against the operating system documentation A A O Hardware If you cannot f a software problem you should then check the Seu and configuration of your hardware First ojah the items in the preliminary checklist eg scribed previously then if you still cannot ct the problem try to identify the source the neXpsection provides checklists for individual compofents and peripherals E Before using a peripheral device or application software that is not an authorized TOSHIBA part or product make sure the device or software can be used with your computer Use of incompatible devices may cause injury or may damage your computer Q 6 Q If something goes wrong User s Manual Your program stops responding If you are working with a program that suddenly freezes all operations chances are the program has stopped responding You can exit the failed pro
119. table below As of Aug 2012 Austria Belgium Bulgaria Canada Cyprus Czech Rep Denmark Estonia Finland France Germany Greece Hong Kong Hungary Iceland India Indonesia Ireland Italy Japan Korea Latvia Liechtenstein Lithuania Luxemburg Malta Monaco Netherlands Norway Philippines Poland Portugal Romania Slovak Republic Slovenia Spain Sweden Switzerland UK USA Legal Footnotes Non applicable Icons User s Manual Certain computer chassis are designed to accommodate all possible configurations for an entire product series Therefore please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis 1 20 ee CPU User s Manual O Lp K Central Processing Unit CPU Performance gal Footnotes CPU performance in your computer product may yary from specifications under the following conditions to E use of certain external peripheral products Ws muse of battery power instead of AC power muse of certain multimedia computer generated graphicStor video applications muse of standard telephone lines or low speed network conn igns H use of complex modeling software such as high end computer aiged design applications Huse of several applications or functionalities simultaneously r E use of computer in areas with low air pressure high altitude gt 1 000 Oy meters or gt 3 280 feet above sea level muse of computer at
120. temperatures outside the range of 5 C to 30 C 41 F to 86 F or gt 25 C 77 F at high altitude all temperature references are approximate and may vary depending on the specific computer model please refer to your computer documentation or visit the TOSHIBA website at www pcsupport toshiba com for details CPU performance may also vary from specifications due to design configuration Under some conditions your computer product may automatically shut down This is a normal protective feature designed to reduce the risk of lost data or damage to the product when used outside recommended conditions To avoid risk of lost data always make back up copies of data by periodically storing it on an external storage medium For optimum performance use your computer product only under recommended conditions Read additional restrictions in your product documentation Contact TOSHIBA technical service and support refer to TOSHIBA support section for more information 64 Bit Computing 64 bit processors are designed to take advantage of 32 and 64 bit computing 64 bit computing requires that the following hardware and software requirements are met H 64 bit Operating System mH 64 bit CPU Chipset and BIOS Basic Input Output System HB 64 bit Device drivers H 64 bit applications Certain device drivers and or applications may not be compatible with a 64 bit CPU and therefore may not function properly 1 21 A py Memory Mai
121. ter at full power Do not use power saving features amp Do not write to the media when the virus check software is running Wait for it to finish then disable virus detection programs including any software that checks files automatically in the background E Do not use utilities including those intended to enhance Hard Disk Drive access speed They may cause unstable operation and damage data amp Do not shut down log off or Sleep Hibernate while writing or rewriting the media E Set the computer on a level surface and avoid places subjected to vibrations such as airplanes trains or cars E Do not use on an unstable surface such as a stand A recovery image of the software on your computer is stored on the Hard Disk Drive and can be copied to either disc media or USB Flash Memory by using the following steps 1 Select either blank disc or USB Flash Memory The application will allow you to choose from a variety of different media onto which the recovery image can be copied including disc media and USB Flash Memory ee ee T O Lr Please note that some of the disc media may not be compatible with the optical disc drive connected to your computer You should therefore verify the optical disc drive supports the blank media you have chosen before proceeding USB Flash Memory will be formatted and all the data in the USB Flash Memory will be lost when proceeding Turn on your computer and allow it to load the Windo
122. th USB ports Do not allow USB ports to come into contact with metal products for example when carrying the computer in your bag Your PC has multiple charging modes so that many different USB devices can be supported for Sleep and Charge function Auto Mode Default is suitable for a wide range of digital audio players However determining which mode is suitable for your USB device is unknown without trying Try each mode using the drop down menu from Auto Mode to Alternate Mode to find the suitable mode for your USB device to charge This function may not be able to be used with some connected external devices even if the appropriate mode is selected In this situation disable and stop using this function Function under Battery Mode This utility can be used to enable disable USB charge under battery mode User s Manual 5 9 O User s Manual O Move the slider to enable or disable thiefunction aN Enabled Enables Sleep aii Gharge function under battery mode Q Disabled Enables Sleep and Charge function only when the AC adaptor is connec dy Lower limit of Specifies the lower limit of re ing battery life remaining battery life by moving the slider bar If the ri maining battery life falls below the setting the Sleep and Charge function will be stopped 9 an Q This setting is only available when the Fuin under Battery Mode is enabled O KS Display Oo This tab lets you customize your computer s display sett
123. the adaptor in the Memory media slot i HDMI Device can T User s Manual An HDMI display device can be connected to the HDMI out port Ofcthe computer To connect the HDMI display device follow the steps as Hetgiled below O As the port operation of all HDMI High Definition Multimedia Interface d display devices have not been confirmed some HDMI display devices may Q not function properly Connecting the HDMI out port 1 Plug one end of the HDMI cable into the HDMI in port of the HDMI display device 2 Plug the other end of the HDMI cable into the HDMI out port on your computer Figure 4 13 Connecting the HDMI out port 1 HDMI out port 2 HDMI cable Please do not plug unplug an HDMI display device under the following conditions E The system is starting up E The system is shutting down When you connect a television or external monitor to the HDMI port the display output device is set to HDMI When you unplug the HDMI cable and re plug it please wait at least 5 seconds before you re plug the HDMI cable again 4 22 O T O When you change the display output device by function key the playback device may not switch automatically In this case in order to set the playback device to the same device as the display output device please adjust the playback device manually by the following steps 1 Click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Sou
124. the nstruction Manual for Safety and Comfort It contains e information on the prevention of stress injuries to your hands and wrists Q that can be caused by extensive keyboard use It also includes information on work space design posture and lighting that can help reduce physical stress Heat injury Avoid prolonged physical contact with the computer If the computer is used for long periods its surface can become very warm While the temperature will not feel hot to the touch if you maintain physical contact with the computer for a long time for example if you rest the computer on your lap or if you keep your hands on the palm rest your skin might suffer a low heat injury E Ifthe computer has been used for a long time avoid direct contact with the metal plate supporting the various interface ports as this can become hot m The surface of the AC adaptor can become hot when in use but this condition does not indicate a malfunction If you need to transport the AC adaptor you should disconnect it and let it cool before moving it Do not lay the AC adaptor on a material that is sensitive to heat as the material could become damaged Pressure or impact damage Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer s components or otherwise cause it to malfunction Mobile phones Please be aware that the use of mobile phones can interfere with the audio system
125. the AC adaptor is not connected the computer s main power source is a removable lithium ion battery pack also referred to in this manual as the main battery You can purchase additional battery packs for extended use of the computer away from an AC power source although you should not change the battery pack while the AC adaptor is connected Before you remove the battery pack save your data and shut down the computer or place the computer into Hibernation Mode Please be aware that when placing the computer into Hibernation Mode the contents of memory will be saved to the hard disk drive although for safety sake it is best to also save your data manually Real Time Clock RTC battery The Real Time Clock RTC battery provides power for the internal real time clock and calendar function and also maintains the system configuration while the computer is turned off If the RTC battery becomes completely discharged the system will lose this information and the real time clock and calendar will stop working You can change the Real Time Clock settings in the BIOS setup utility Please refer to Troubleshooting for further information A Op Care and use of the battery poy This section provides the important safety re autions in order to handle your battery pack properly Q Refer to the enclosed Instruction Manual for sity ond Comfort for detailed precautions and handling instructions P m Make sure the battery is securely i
126. the active display device To use a simultaneous mode you must set the resolution of the internal display panel to match the resolution of the external display device F5 FN F5 Enables or disables the Touch Pad F6 FN F6 Moves media backward F7 FN F7 Plays or pauses media playback F8 FN F8 Moves media forward F9 FN F9 Decreases the computer s volume F10 FN F10 Increases the computer s volume F11 FN F11 Turns the sound on or off 4 2 O Oi Special Standard F1 Function function mode F12 mode F12 FN F12 Turns the irplane mode on or off FN 1 FN 1 Reduces the i size on the desktop or the font sizes en one of the supported applica pywindows FN 2 FN 2 Enlarges the icon size 6nythe desktop or the font sizes within onedf the supported application windo ie FN Space FN Space Changes the display resolution K Pa A ie Some functions will show the toast notification at the edge of the screen 6 T 1 Those toast notifications are disabled at factory default You can enable them in the TOSHIBA Function Key application To access it click Desktop gt Desktop Assist gt Tools amp Utilities gt Function Key Windows special keys The keyboard provides two keys that have special functions in Windows the Windows Start Button key activates the Start screen while the application key has the same function as the secondary right mouse button This key activates the Start screen E T
127. their status O Ya General a F This window displays the installed BIOS version date and EC version Set all settings to Return all values to the factory default settings default Sleep and Charge This tab allows you to set advanced features when the power of the computer is turned OFF Power OFF includes Sleep Mode Hibernation Mode or shutdown state It also displays the remaining battery capacity Sleep and Charge Your computer can supply USB bus power DC5V to the USB port even when the computer is turned OFF This function can be used for ports that support the Sleep and Charge function The port with the icon 4 has Sleep and Charge function Move the slider to enable or disable this function Enabled Enables the Sleep and Charge function Then you can use this function to charge certain USB compatible external devices such as mobile phones or portable digital music players Disabled Disables the Sleep and Charge function m The Sleep and Charge function may not work with certain external devices even if they are compliant with the USB specification In those cases turn the power of the computer ON to charge the device O O m When Sleep and Charge function is enabled USB bus power DC5V will be supplied to compatible ports even when the power of the computer is turned OFF USB bus power DC5V is similarly supplied to the external devices which are connected to the compatible ports Howev
128. tion a L F2 BIOS utility Ly F12 Boot menu an 0 zero Recovery options ty lA If your computer starts to load the Operating System instead of ces advanced options follow the steps below 1 In the Settings charm click Power and then select Restart S4 2 Hold down the corresponding key and then release this key one second after the computer is power on 3 Follow the on screen instructions to proceed Hardware and system checklist This section discusses problems caused by your computer s hardware or attached peripherals Basic problems may occur in the following areas m Power m Additional memory module m Keyboard m Sound system m Internal display panel m External monitor H Hard Disk Drive m LAN Memory Media Card m Wireless LAN E Pointing device E Bluetooth m USB device Power When the computer is not plugged into an AC power outlet the battery pack is the primary power source However your computer also has a number of other power resources including an intelligent power supply and a Real Time Clock RTC battery all of which are interrelated with any one having the ability to produce apparent power problems Overheating power down If the processor s temperature reaches an unacceptably high level with either setting the computer will automatically shuts down to prevent any damage in this instance all unsaved data in memory will be lost User s Manual 6 4 O Problem Computer shuts down autom
129. tioned at a variety of easy to view angles The internal keyboard provides the dedicated numeric keys dedicated cursor control keys H and keys Refer to the The Keyboard section for details o G Touch Pad Touch Pad control buttons LCD Sensor switch O The Touch Pad jocated in the palm rest is used to control the movement of the on screen pointer To use the Touch Pad simply touch and move your fingertip across fripcthe direction you want the on screen pointer to T9 The two buttons below the Pouch Pad are used like the buttons on a standard se press the left button to select a menu item ofito manipulate text or graphics designated by the pointer and press the right button to display a men ther function depending on the software you a A using Ga This switch senses when the display panel is Ce either closed or opened and activates the Panel Ns Power On Off feature as appropriate For example when you close the display panel the computer enters Hibernation Mode and shuts itself down and then when you next open the display the computer will automatically start up and return you to the application you were previously working on You can specify within the Power Options To access it click Desktop gt Desktop Assist gt Control Panel gt System and Security gt Power Options Internal Hardware Components This section describes the internal hardware components of your computer Us
130. trictions for Use of 5470 5725MHz Frequencies in Europe Italy For private use a general authorization is required if WAS RLAN s are used outside own premises Luxembourg Implemented General authorization required for network and service supply Russian Limited e i r p 100mW Permitted to use Federation only for indoor applications closed industrial and warehouse areas and on board aircraft 1 Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight 2 Permitted to use for public wireless access local networks on board aircraft during a flight at the altitude not less than 3000m To remain in conformance with European spectrum usage laws for Wireless LAN operation the above 2 4GHz and 5GHz channel limitations apply for outdoor usage The user should use the wireless LAN utility to User s Manual 1 16 O __ User s Manual O check the current channel of operationf operation is occurring outside of the allowable frequencies for outdoor us listed above the user must contact the applicable national spectrum regafator to request a license for outdoor operation B 1C O Canada Industry Canada IC 7 This device complies with RSS 210 of Industry Canada Qperation is subject to the following two conditions 1 this device may rit cause interference and 2 this device must accept any interference Ancluding inter
131. ul the computer require service by TOSHIBA or TOSHIBA s authorized servi roviders Additionally TOSHIBA may also use this information foPyalty assurance analysis g Subject to the use restrictions above the HDD data logged ridpe transferred to entities located outside of your country or region offesidence e g European Union Those countries may or may not have the data protection laws or data protection levels as required by your hom O country or region Once enabled you may disable the TOSHIBA PC Health Monitor at any Oo time by uninstalling the software via Uninstall a program in the Control Panel Doing so will automatically delete all collected information from the HDD The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA s obligations under its standard limited warranty in any way TOSHIBA s standard limited warranty terms and limitations apply Starting the TOSHIBA PC Health Monitor il User s Manual The TOSHIBA PC Health Monitor can be started using the following methods Click Desktop gt Desktop Assist gt Support amp Recovery gt PC Health Monitor E Click the icon f in the notification area then click the Enable PC Health Monitor message the first time you run the application and Run PC Health Monitor every time thereafter No matter which method is used the TOSHIBA PC Health Monitor explanation screen will be displayed Clicking Next will display the PC Health Mo
132. ute is turned to Off Check to make sure the headphone connection is secure Check within the Windows Device Manager application to ensure the sound device is enabled and that the device is properly working In this instance you may be experiencing feedback from either the internal microphone or an external microphone connected to the computer please refer to Sound System and Video mode for further information Volume cannot be adjusted during Windows start up or shut down If you are still unable to resolve the problem contact TOSHIBA Support Please also refer to Operating Basics and to the documentation supplied with your monitor for further information User s Manual O LAN User s Manual Problem Monitor does not turn on No display Display error occurs Problem Cannot access LAN Or Procedure After confirming that monitor s power switch is on you should check connections to make sure that the power cord daptor is firmly connected to the monitor an Ao a working power outlet fa Try adjusting the contrast and brigh f ess controls on the external monitor h Press the function key in order to change display priority and ensure that it is not set fi internal display only O Check to see if the external monitor is connected gt When the external monitor is set as the primary display device in extended desktop mode it will not display when the computer wakes up from Sleep Mo
133. uter from Sleep Mode press and hold the power button or any key on the keyboard for a short amount of time Please note that keyboard keys can only be used if the Wake up on Keyboard option is enabled within the TOSHIBA System Settings If the computer enters Sleep Mode while a network application is active the application might not be restored when the computer is next turned on and the system returns from Sleep Mode To prevent the computer from automatically entering Sleep Mode 4 3 disable Sleep Mode within the Power Options To use the Hybrid Sleep function configure it in the Power Options Benefits of Sleep Mode The Sleep Mode feature provides the following benefits Restores the previous working environment more rapidly than does the Hibernation Mode feature Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature Allows the use of the panel power off feature Executing Sleep Mode You can enter Sleep Mode in one of three ways In the Settings charm click Power and then select Sleep Close the display panel Please note that this feature must be enabled within the Power Options Press the power button Please note that this feature must be enabled within the Power Options When you turn the power back on you can continue where you left when you shut down the computer When the computer is in Sleep Mode the Power
134. vsetercess d venncevucuheded ste dendsnvvudieceennadninaeeies 3 2 Right Sid sasigan aa anapa iadi aa ieee 3 3 Underside 00 eccceeeneeeeeeeeeeeeneeeeeeeeeeceesessneeeseeesnceeeesseeeseeeeaeeaseneeeseenaneneaeen 3 5 Front with the display open 2 cccsseeceeeeeseeeeceeeeeeeeeeeeeeeeeeeeeeeeeeeees 3 6 Internal Hardware Components 2 2 cceeeeeeeee cece eeeeeeneeeeeeeeseeeeeeees 3 8 Monitoring of power condition cecceseeseeeeeeseeeeeeseeeeeseeeeeeeeneeenees 3 12 Specifications ee 3 13 Chapter 4 Operating Basics The Keyboards cescsesecdectenccentecsccecsnsiecscedecesuesetesencsoap cd cedeansanecevecedanaeas 4 1 Wireless COMMUNICATIONS ceccceeeeteeeeeeeeeeeeeeeeeeeeeeeeeeeeeeneeeseenenseeees 4 3 LAN ee tec Beas rae ck Si ea eae cs Sea Sauces St wide sues 4 6 Battery eccccsssececeseeeeeeeeesesseeeeeeeeeeeeceesaseaueeeseeeseseeeeaseenseeseeesaseeeesseensneneeeen 4 8 Additional memory module ce seecceeeeeeeee ee eeeeeeeeeeee ee eeeeeeeeeeeeeees 4 14 Peripheral devices 2 ccceeeceeeeceeeeeeeeeeeee seen seen cee seseeaeeeeeeseeeeneeeeees 4 18 Optional TOSHIBA Accessories 0 0 ceseeeeseteeeeeeeeneeeeeseeeneeeeeenennsneeeees 4 24 Sound System and Video mode cccesseneneeeeeeneeeeeseeeneeeseeneneneeeeees 4 24 Computer Handling isnaad ceasensscecetecesiceddeneeteneceeeees 4 26 User s Manual ii Chapter 5 Chapter 6 User s Manual O Heat dispersal
135. w operating system from the Hard Disk Drive as normal Insert the first blank disc into the external optical disc arive Cy ot Insert the USB Flash Memory into one available USB port C gt Click Desktop gt Desktop Assist gt Support amp Recovery gt O Recovery Media Creator Cp After Recovery Media Creator starts select the type of media and the S4 title you wish to copy and then click the Create button o Restoring the pre installed software from your created Recovery Media A User s Manual If the pre installed files are damaged you are able to use the Recovery Media you have created to restore the computer to the state it was in when you originally received it To perform this restoration follow the steps below When you reinstall the Windows operating system the hard disk will be reformatted and all data will be lost Please make sure to use the default Boot Mode option in the BIOS setup utility before restoring To start BIOS Setup press and hold the F2 key and then turn on the computer Release the F2 key one second after the computer is power on If your computer does not load the Recovery options please refer to the Troubleshooting section In the BIOS setup screen select Advanced gt System Configuration gt Boot Mode gt UEFI Boot Default If you set the Boot Mode as CSM Boot the recovery media created by Recovery Media Creator will NOT be able to restore If you create a recovery image usi
136. y characters for example I or produced by pressing the SHIFT or ALT keys and so on User s Manual 5 5 O O amp Delete button E Click this button to delete a di word Before you can delete a password you must first enter ie purent password correctly E Change button Gp Click this button to change a registered passwofe Before you can change a password you must first enter the i correctly A Owner String text box pb You can use this box to associate text with the password Rtgs you enter text click Apply or OK When the computer is started th text will be displayed together with the prompt asking you to enter a password Or 3 You can use BIOS Setup to set change or delete the HDD Password fs J or HDD Master Password m 7o start BIOS Setup press and hold the F2 key and then turn on the computer Release the F2 key one second after the computer is power on m Toend the BIOS Setup press F10 and then press ENTER to accept the changes The computer will restart If your computer does not load the BIOS Setup utility please refer to the Troubleshooting section assist you and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE TOSHIBA will NOT be held responsible for any loss of any data any loss of use or access to your HDD or for any other losses to you or any other person or organization that result from the loss of access to your HDD If you can t accept this risk don
137. y resulting in serious injury E t may not be possible to make a network connection to a specified network name using the ad hoc network function If this occurs the new network will have to be configured for all computers connected to the same network in order to re enable network connections Please be sure to use new network name Wireless LAN User s Manual The Wireless LAN is compatible with other LAN systems based on Direct Sequence Spread Spectrum Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802 11 Wireless LAN standard m Frequency Channel Selection of 5GHz for IEEE 802 11a or and IEEE802 11n Frequency Channel Selection of 2 4GHz for IEEE 802 11b g or and IEEE802 11n E Roaming over multiple channels E Card power management m Wired Equivalent Privacy WEP data encryption based on an 128 bit encryption algorithm m Wi Fi Protected Access WPA The transmission speed over the Wireless LAN and the distance over which the Wireless LAN can reach may vary depending on surrounding electromagnetic environment obstacles access point design and configuration client design and software hardware configurations The transmission rate described is the theoretical maximum speed as specified under the appropriate standard the actual transmission speed will be lower than the theoretical maximum speed 5 User s Manual O f Le Setting 7 Q aor eas 1 Please ma
138. you can continue working right where you left off When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled always completely shut down the computer This includes turning off any wireless communication functionalities and cancelling settings that reactivate the computer automatically such as a timer recording function Failure to completely shut down the computer in this way could allow the operating system to reactivate and run pre programmed tasks or preserve unsaved data which could interfere with aviation or other systems possibly causing serious injury A Before entering Sleep Mode be sure to save your data E Do not install or remove a memory module while the computer is in Sleep Mode The computer or the memory module could be damaged m Do not remove the battery pack while the computer is in Sleep Mode unless the computer is connected to an AC power source Data in memory could be lost m Do not switch to Sleep Mode while transferring data to external media such as USB devices memory media or other external memory devices Data will be lost User s Manual 2 8 User s Manual en When the AC adaptor is connected the computer will go into Sleep Mode according to the settings in the Power Options to access it click Desktop gt Desktop Assist gt Control Panel gt System and Security gt Power Options To restore the operation of the comp

Toshiba U940 - Vandenborre

Contents

Download Pdf Manuals

Related Search

Related Contents