Climapro2 RF - With Receiver - Glow-worm
Contents
1. Wednesday 08 35 01 04 2014 mT 20 C Ext T D C COOLING PROG OFF 18 00 To override the cooling program or access the override menu If disabled Wednesday 08 35 01 04 2014 mT 20 C Ext T D C COOLING 17 6 9 3 Programming cooling Factory setting Monday to Friday slot Saturday N of time Start Activate slot Sunday slot e Press the button and select gt cooling gt program gt define gt choose a day on the screen COOLING FROG 00 00 E i OH 08 30 an OFF 18 00 OW 2200 7 Orr 00 00 arx Adjust ok Hext Back To set an operating time slot Programming for a day begins at 00 00 with a maximum of 7 time intervals over 24 hours e Activate or deactivate the cooling with the ey buttons and validate with button L ok J 18 e Define the end of the time interval with the buttons and validate with the button e Begin the programming operations again if you wish to add other time intervals To modify a setting e Use the buttons go back or go forward to highlight the setting in question e Change the cooling setting or a time by pressing buttons and validate with the button To delete a time interval Deletion is performed time interval by time interval from the last time interval to the first e Use the button to highlight the last time interval that was set COOLING PROG OFF 08 30 ii OFF FEN OW2. Adjust Hext Use the button to display BESSAN The display automatically goes to iml and deletes the programmed setting COOLING FROG 0020094585_01 08 10 Glow worm The setting for the previous time interval then applies up to MERENN e Validate with the button or delete another time interval To delete another time interval e Use the button to highlight the previous time interval and perform the action again Copy a day This function allows you to copy a program from one day to other days This allows the selected day to be copied to a day of the week to weekdays Monday to Friday toa full week Monday Sunday Once a day has been programmed you are automatically returned to the selection screen of the day to be programmed PROGRAM Cooling LOPY 4 gay Monday Tuesday Wednesday Thursday riday Saturday Sunday ok Select Back e Select the function copy a day and press the button to confirm PROGRAM Copy a day Day to copy uesday Wednesday Thursday Sunday ok Select Back 0020094585 _01 08 10 Glow worm e Select the day to be copied with the buttons and press to confirm PROGRAM Copy a day Copy to ednesday Thursday Friday Saturday Sunday Monday Friday Monday Sunday ok Select Back e Copy to the day or group of days of your choice by selecting with and press to confirm 6 9 4 Ove
3. should be selectively collected for energy recovery reuse or recycling Take the room thermostat to an appropriate collection point for processing energy recovery and recycling of waste By complying with this directive you will contribute to the preservation of natural resources and the protection of human health 5 2 Packaging We recommend that you recycle the packaging of the Climapro RF ina responsible fashion dispose of the waste in compliance with regulations in force HOW TO USE YOUR CLIMAPRO RF 6 2 Description of buttons 6 Climapro RF use Buttons Description Scroll up down buttons 6 1 General view The buttons allow To browse menus To decrease increase value to be adjusted To enable ON or disable OFF a function Selection button The button allows To validate the selection or setting Back button The button allows To return to the previous menu To return to the previous setting Menu button 4 The button allows To access the main menu Return to the main screen at 3 any time 7 6 3 Climapro RF and its wall support 3 Legend Wall support Room thermostat Scroll up down button Selection button Back button Menu button Screen NO oh WD 6 0020094585 _01 08 10 Glow worm 6 4 Main screen 6 4 1 Description 3 Wednesday 08 35 01 04 2014 ozu ae mete 20 C Stir 20 Saas HEATIHG PROG pb IEL
4. 24 C ar Adjust ok Hext Back 20 e Increase or decrease with the buttons to display the initial cooling temperature and press the button 6 10 Holiday Menu This menu lets you HAIN HEHU Holiday Configure a period of absence OFF Enable or disable the absence period 6 10 1 Configuring a period of absence e Press the button and select gt holiday gt set up on the screen HOLIDA Start 01 04 2014 10 00 End 15 04 2014 egal During holiday Room Temp 12 C Hot water OFF ar Adjust ok Hext Back e Set the start and end your absence day and time by pressing and pressing the button __ok__ to confirm e Remember to adjust the room temperature by pressing and pressing the button __ok__ to confirm The suggested temperature during an absence is 12 C if the heating is turned on 5 C if the heating is turned off 0020094585 _01 08 10 Glow worm Reminder the room thermostat s anti freezing system controls the start up of the heating when the temperature of the room in which the thermostat is installed falls below 5 C or if an outdoor sensor is fitted the outside temperature falls below 3 C The hot water is turned off Display on main screen Display only if the hot water function is activated If activated Wednesday 08 35 01 04 2014 mT 20 C Ext T D C HOLIDA 01 04 15 04 HEATING P
5. possible Wednesday 08 35 01 04 2014 mT 20 C Ext T D C Press OK For 3 seconds HEATING PROG 22 C 22 00 To temporarily unlock the keypad by pressing the button for 3 seconds To permanently disable the automatic keypad lock e Disable the automatic keypad lock before the thermostat enters standby again 0020094585 _01 08 10 Glow worm 6 11 6 Screen e Press the button and select gt parameters gt screen gt on the screen PARAMETERS Display Brightness Contrast ok Select Back e Press to highlight your choice brightness or contrast and press to confirm PARAMETERS PARAMETERS Display Display Brightness Contrast tette ones ar Adjust ar Adjust ok Select ok Select Back 5 Back e Adjust your screen by pressing and press the button to confirm 6 11 7 Return to factory settings e Press the button and select gt parameters gt reset on the screen RESET Return to Factory settings NO YES ok Select 5 Back The resetting of factory settings is irreversible Any customised configuration of the room thermostat will be lost s23 6 11 8 General information on the Climapro RF This feature allows you to display the following information area software type and version e Press the men button and select gt parameters gt about on the screen 24 0020094585_01 08 10 Glow worm ANY ASSISTANCE Wed
6. the button then on the screen select gt hot water gt override temperature gt set up OVERRIDE Hot water OH Until mE ar Adjust ok Hext Back e Activate or deactivate domestic hot water heating with the buttons and validate with button Lo e Set the end time of the temporary modification with the buttons and press the button to confirm To cancel e Press the button then on the screen select gt hot water gt override off It is also possible to cancel the override from the main screen see override menu 15 Display on main screen If enabled it will be possible Wednesday 08 35 01 04 2014 mT 20 C Ext T D C OVERRIDE DHI HOT WATER OM 10 30 HEATING PROG 22 C 22 00 To override the hot water heating program To access the override menu if multiple programs are active hot water heating and heating cooling To cancel the override in the active hot water heating program To access the cancel override menu if more than one override is active hot water heating and heating cooling 6 9 Cooling function This feature enable the cooling of the room temperature Heat pumps only Menun This menu lets you Activate or deactivate cooling COOLING on OFF a ON Program OH Override OFF Temperature 24 C Program the timed intervals for the cooling Override the program if activated ok Select Back Effect of the c
7. 18 00 4 Legend 1 Display area of the current operating mode Display area for messages Day of the week Current time Current date Room temperature Outside temperature as measured by the outdoor sensor if sensor is connected NO on Rh amp DN Please note the room temperature displayed on the Climapro RF may vary when the thermostat is held in your hand Climapro RF takes measurements optimally when it is held in its wall support 0020094585 _01 08 10 Glow worm 6 4 2 Button functions From the main screen it is possible to Buttons Description To change the room temperature if the heating program is disabled To access the override of an active program To access the override menu if multiple programs are active see override menu To unlock the keypad by pressing the button for 3 seconds To access the cancel override menu if more than one override is active see override menu To access the main menu 6 4 3 Screen on standby The room thermostat screen goes into standby when the keyboard is not in use for 1 minute The screen displays no information If the lock function is enabled locking takes place when the room thermostat is on standby see keypad lock e Press a key on the keyboard to display the main screen 6 5 Override shortcuts 6 5 1 Override menu This menu appears when multiple programs are enabled e From the main screen pr
8. Gloweworm Climapro RF User manual To be left with the user wireless room thermostat with receiver www glow worm co uk TABLE OF CONTENTS READ CAREFULLY BEFORE USING Introducing your CHIMADIO R Pissis ioen S 3 1 1 DY S lt Yo1 9 6 6 9 eee 3 Product documentato sssr en RRRA A E AN AES 3 2 1 Document storage s cniivinteatiaraivnedvvenasuvarsvinicussitbulatvbsareiseNsiawieatiensawed ts 3 2 2 Explanation Of SYMDbOIS cccccceecceeseseeeeeeseeeeeeseeeeeeeseeeeeeeseeeeeeeas 3 MS ae E peste tnd uc sec gate te A E E E tats mente EEEE EE EE 3 Guarantee Responsibility ccccccccssececceeecceeeeeceeeeeccesseesensessseeessaaees 4 4 1 Detailed guarantee cccccsccccesececsseeeeeseceeseecessaseesssecensnstenenstenees 4 4 2 Climapro RF manufacturer responsibility cccceeee 4 4 3 Protection against frost ccccccccceeceseeeeesseeeeeeseeeeeeeseeeeeesseeeeeeenas 5 44 Thermostat Placement ccccccssccesssececssscecesseeseeeeessueeeseseesseaeees 5 PROC Y CIO wancanmocannbeis sidan asdusriasunieeotiasonteiganhcieas E E E O 5 5 1 PO AUN cect cle dene eet a RER AEAEE N EE EAE RRS 5 5 2 PACKAGING e o E E 9 HOW TO USE YOUR CLIMAPRO RF 6 Cmap o RE US Gria E a 6 6 1 RS TSO VIEW eornp ia iS E r REE Ta a ETE 6 6 2 Description of DUTLONS cece cecccceeeceeeeeeeeeeeeeseeeeeseeeeeseeeeesaeeeesees 6 03 Climapro RF and its wall SUPPOFt eee eee eee e
9. ROG 22 C 22 00 6 10 2 Deactivating a period of absence e Press the button and select gt holiday gt off on the screen MAIN HEHU Holiday Set up ok Select Back 0020094585 _01 08 10 Glow worm 6 11 Parameters Menu This menu lets you Adjust the date and time Choose the language Personalise the name of the control FARAHETERS Te Turn the keypad lock on Coie or off Lock keypad OFF Display Reset Adjust the brightness and About contrast of the screen ok Select b Back Return to factory settings Display information zone type and software version for the room thermostat 6 11 1 Setting the current date e Press the button and select gt parameters gt date on the screen DATE e Set the display format of the current date by pressing and pressing ox J There is a choice between the factory setting day month year and year month day e Set the current date by pressing and pressing the button to confirm 21 6 11 2 Setting the current time e Press the button and select gt parameters gt time on the screen TIME Set time HH mm ees arx Adjust ok Hext 5 Back e Set the time by pressing and pressing the button to confirm 6 11 3 Choose the language for the menus e Press the button and select gt parameters gt language on the screen LAMGUAGE Deutsch rangals Espa ol Catal n Gellego Euskera Italiano Oth
10. _01 08 10 Glow worm Climapro RF is not designed to be used by persons including children with physical sensory or mental restrictions or a lack of experience or knowledge To ensure the safety of these persons they must seek help from and be guided by persons who are competent to explain the usage of this room thermostat e Make sure that children do not play with this appliance 4 3 Protection against frost The appliance s frost protection system switches the heating on when The room temperature where the appliance is installed goes below 5 C or if the outside temperature is below 3 C For an absence for a determined period e Specify the duration of your absence see the holiday menu For an indeterminate or prolonged absence e Deactivate the room thermostats heating function so that the heating system uses its own functioning settings see the menu activate deactivate the heating e Refer to the boiler manual for protection guidance 4 4 Thermostat Placement To ensure correct functioning of the heating system whenever possible the Climapro RF should be placed in the room thermostat support that is mounted in the temperature reference room of the property 0020094585 _01 08 10 Glow worm 5 Recycling 5 1 Appliance Climapro RF contains many recyclable Ory This symbol indicates that this room thermostat must 4 amp not be disposed of with household waste that it
11. and deletes the programmed setting The setting for the a time interval then applies up to MEENE e Validate with the button or delete another time interval To delete another time interval e Use the button to highlight the previous time interval and perform the action again Copy a day This function allows you to copy a program from one day to other days This allows the selected day to be copied toa day of the week to weekdays Monday to Friday 0020094585 _01 08 10 Glow worm toa full week Monday Sunday Once a day has been programmed you are automatically returned to the selection screen of the day to be programmed PROGRAM Hot water Copy a day Monday Tuesday Wednesday Thursday Friday Saturday Sunday ok Select Back e Select the function copy a day and press the button to confirm PROGRAM Copy a day Day to copy uesday Wednesday Thursday Friday Saturday Sunday ok Select Back e Select the day to be copied with the buttons and press to confirm PROGRAM Copy a day Copy to EE Thursday Friday Saturday unday Monday Friday Monday Sunday ok Select Back e Copy to the day or group of days of your choice by selecting with and press to confirm 0020094585 _01 08 10 Glow worm 6 8 5 To override the hot water heating program This feature allows the temporary overriding of current programs e Press
12. d If so replace with new batteries 25 8 Replacing the batteries Wednesday 08 35 01 04 2014 mT 20 C Ext T FC Low battery Change batteries HEATING FROG 18 C 18 00 When the message battery low change the batteries appears on the main screen the remaining life of the batteries is about one month Remarks Ifthe batteries are not changed in time the generator functions without the ambient temperature thermostat Programme settings will not be lost Clean the battery compartment before inserting new batteries Do not mix new and used batteries or batteries of different types Do not use rechargeable batteries Never expose the batteries to excessive heat or a naked flame never try to take them apart and make sure that they are never short circuited If electrolyte leaks and comes into contact with skin or clothing rinse them immediately with water 26 Legend 1 2 3 4 Battery cover Batteries Battery compartment Room thermostat Remove the battery cover 1 for the room thermostat 4 respecting the order of operations from A to C Remove the batteries 2 Replace the batteries with new batteries of type AA LR6 respecting their polarity direction and The batteries must not be placed in household waste but disposed of in accordance with the regulations i
13. defective operation damage to the control box resulting from abnormal abusive use or inadequate maintenance Servicing maintenance should be carried out by a competent person approved at the time by the Health and Safety Executive in accordance with the rules in force in the countries of destination 4 2 Climapro RF manufacturer responsibility The appliance is installed by a qualified engineer in accordance with installation instructions The guarantee detailed above is applicable on the condition that Climapro RF is used for normal domestic purposes and in accordance with the manufacturer s operating and maintenance instructions Climapro RF is not serviced maintained repaired dismantled or tampered with during the guarantee period by anyone other than a qualified engineer The repair or replacement of parts during the guarantee period does not have the effect of extending the period Faults or damage resulting from an incorrect or inadequate installation inappropriate maintenance or incorrect settings The manufacturer has no responsibility whatsoever for any damage resulting from Any defects in the system to which the Climapro RF is connected Any defects caused by inadequate frost protection Any deterioration or maladjustment following changes in the characteristics of the electrical supply voltage e For further details refer to your Terms and Conditions 0020094585
14. er ar Choose ok Select Back To display the additional languages e Select gt others on the screen LANGUAGE Deutsch English Frangais Espa ol Catal n Gellego Euskera Italiano ar Choose ok Select 5 Back e Choose the language with the button and press the button to confirm 22 6 11 4 Control name Press the button and select gt parameters gt control name on the screen FARAHETERS COHTROL HAME ar Character ok Hext Back e Select each character of the device s name by pressing and then pressing the button to confirm The installation may be composed of several room thermostats In such a case a number corresponding to the area is assigned by the control unit to each thermostat The number 1 is assigned to the main area example LOUNGE 1 Display on main screen If enabled Wednesday 08 35 01 04 2014 mT 20 C Ext T 5C BAA HEATING PROG 22 C 22 00 0020094585 _01 08 10 Glow worm 6 11 5 Enable or disable automatic keypad lock This feature allows you to turn the keypad lock on or off Locking occurs when the room thermostat enters standby e Press the button and select gt parameters gt lock keypad on the screen PARAMETERS Lock keypad Ory OFF ok Select 5 Back e Press to highlight your choice activate or deactivate and press the button to confirm Display on main screen If enabled it will be
15. ess OVERRIDE OFF Hot water OFF ok Select Back e Select the program to which the temporary modification will be applied and press 6 5 2 Override This feature allows the temporary overriding of current programs OVERRIDE Room Temp 21 0 Until MEN ar Adjust ok Hext Back e Settings heating temperature enable or disable for hot water and cooling e Press the button to confirm ok _ e Set the end time of the temporary modification with the buttons and press the button to confirm L Display on main screen If enabled Wednesday 08 35 01 04 2014 wtr 20 C Ext T 5 OVERRIDE DHW HOT WATER OFF 10 30 OVERRIDE CH 21 C 10 30 To cancel e From the main screen press C5 CANCEL Override Heating Hot water ok Select Bac e Select the override s to be cancelled and press to confirm 6 6 Main menu e Press the button menu wena Browsing Browse with buttons pe MENU Press the button ON Hot water ON to return to the previous screen Cooling OFF Holiday OFF Select with the button Parameters Efficiency info ok Select Back Press the button to return to main screen at any time gt Menus available according to the configuration of the system 0020094585 _01 08 10 Glow worm 6 7 Heating Menu This menu lets you Activate or deactivate the HEATING heating PE Prog
16. he button to confirm Display on main screen If enabled it will be possible Wednesday 08 35 01 04 2014 mT 20 C Ext T D C HEATING FROG 22 C 22 00 To override the heating program or access the override menu If disabled it will be possible Wednesday 08 35 01 04 2014 mT 20 C Ext T D C HEATIHG 20 C es To set a constant room temperature 10 6 7 3 Temperature setting values C Programming the heating maximum 30 adjustable during installation Factory setting Monday to Friday slot 2 Saturday slot Sunday Sunday slot e Press button gt then select on screen gt heating gt program gt define gt choose a day HEATING PROG 0020094585 _01 08 10 Glow worm To set an operating time slot Programming for a day begins at 00 00 with a maximum of 7 time intervals over 24 hours e Increase or reduce with the CJ buttons to display the desired ambient temperature setting and validate with button Lok _ J e Define the end of the time interval with the buttons and validate with the button e Begin the programming operations again if you wish to add other time intervals To modify a setting e Use the buttons go back or go forward to highlight the setting in question e Modify a temperature or a time with the buttons and validate with the button To delete a time interval Deletion is performed time in
17. ir of the room thermostat yourself Only qualified engineers are allowed to work on the room thermostat e Do not allow children to operate the appliance Certain home improvements may adversely affect the operation of your Climapro RF You should consult your installer for advice before carrying out any work We recommend that you take great care when adjusting the hot water temperature Water can be very hot when it leaves the tap 4 Guarantee Responsibility 4 1 Detailed guarantee The room thermostat that you have chosen has undergone numerous quality inspections This apparatus must be installed by a qualified professional who can verify that all the technical constraints relating to the connection of the appliance and the requirements of the installation location have been met To obtain the maximum benefit of your room thermostat it must be thoroughly checked for operation and adjustments specific to the installation it is connected to Glow worm offers a two year parts and labour guarantee against defects in manufacture and defective parts As a result we commit to repairing or replacing the parts recognised as defective at origin The repair or replacement of parts during the manufacturer s guarantee period does not have the effect of prolonging its initial duration The manufacturer s parts guarantee is invalidated in the case of an incorrect installation or inappropriate storage or in the case of
18. me intervals when hot water heating oo functions Override the program if activated 0020094585 _01 08 10 Glow worm Menus available according to the configuration of the system The result of combining the hot water heating and heating program functions of hot Hot water heating water programme E No hot water or Constant hot water heating without program Heating Hot water heating ON ON according to program ON enable OFF disable 6 8 1 It is necessary to enable the hot water heating function in order to program the ON OFF times Depending on the appliance disabling the program cuts off the hot water heating as well as the production of hot water see the appliance installation manual Enabling or disabling the hot water heating e Press the button Lt then on the screen select gt hot water gt on off HOT WATER On ofF ok Select Back 0020094585 _01 08 10 Glow worm e Press to highlight your choice activate or deactivate and press the button to confirm 6 8 2 Temperature setting values Setting the water temperature minimum recommended maximum O adjustable during installation e Press the button then on the screen select gt hot water gt temperature HOT WATER Temperature Hot water temp ar Adjust xt ack e Increase or reduce with the buttons to display the desired water temperature and validate with but
19. n force 0020094585 _01 08 10 Glow worm 9 Maintenance and care of Climapro RF 9 1 Cleaning e Clean the cover of the Climapro RF with a dry or slightly wet cloth e Ensure that no water enters the room thermostat Do not use any form of AN abrasive or solvent cleaner as you may damage the paintwork 9 2 Spare Parts In order to guarantee the safe and prolonged life of the product insist that only the manufacturer s genuine spare parts are used 10 Contact your after sales e Go to www glow worm co uk or call our After Sales Service on 01773 828100 for further information 0020094585 _01 08 10 Glow worm 27 0020094585_01 08 10 Because of our constant endeavour for improvement details may vary slightly from those shown in these instructions Glow worm Nottingham Road Belper Derbyshire DE56 1JT
20. nesday 08 35 01 04 2014 7 Trouble shooting This chapter contains all the messages that the thermostat may display and the corrective actions that you can carry out to put the appliance back into service If after carrying out this basic advice and your appliance still does not work leave it turned off and contact your qualified engineer Wednesday 08 35 01 04 2014 mT 20 C Ext T PC Communication Refer to manual HEATING PROG 18 C 18 00 Wednesday 08 35 01 04 2014 mete 20 C Ext T FC Low battery Change batteries HEATIHG FROG 18 C 18 00 Wednesday 08 35 01 04 2014 inst 20 C Ext T TFC appliance HEATIHG FROG 18 C 18 00 Wednesday 08 35 01 04 2014 met 20 C Ext T FC System pressure too low HEATING PROG 18 C 18 00 Check that power is supplied to the heating system See the manual for the appliance Replace the batteries following the instructions see battery replacement See the appliance manual to reset See the appliance manual to increase the pressure in the heating system 0020094585 _01 08 10 Glow worm Int T 20 C Ext T TFC Fault call your after sales HEATIHG FROG 18 C 18 00 No display Call the telephone number displayed on the screen e Check that The room thermostat batteries are properly installed in their compartment The battery polarity is not reversed The batteries are not exhauste
21. oling program It offers the possibility of connection to an outdoor sensor The room thermostat also controls hot water temperature in accordance with the corresponding programming Glow worm has specially developed a range of accessories designed to help you get the best performance from your appliance 2 Product documentation 2 1 Document storage e Make sure that this manual is stored close to your Climapro RF for future reference Should you move home ensure that this manual is close to this room thermostat or placed in the home information pack for future reference by the new home owners e Read these instructions and follow them carefully for the safe and efficient use of your room thermostat 0020094585 _01 08 10 Glow worm No responsibility or liability can be accepted for damages caused by failure to follow the instructions in this manual 2 2 Explanation of symbols DANGER Risk of injuries 3 Safety IMPORTANT Useful information this appliance has been manufactured according to the safety regulations and techniques in force This appliance s conformity with the applicable regulations has been certified C The CE mark indicates that You must comply with the following recommendations and safety instructions e Do not attempt to modify Climapro RF or its immediate surroundings as this may have an affect on the safe use of the appliance e Never perform any maintenance or repa
22. ombination of the cooling functions and the cooling program Adjust cooling to the desired temperature Menus available according to the configuration of the system 16 Cooling Cooling function program Cooling with constant water temperature set by the installer Cooling according to program room temperature set by the user Start of cooling when the room temperature exceeds the set value ON enable OFF disable 6 9 1 Enable or disable cooling e Press the button and select gt cooling gt on off on the screen COOLING On ofF Ory OFF ok Select Back e Highlight your choice by pressing and press the button to confirm COOLING On OFF Turning on your will stop your heating Confirm YESI HO ok Select Back 0020094585 _01 08 10 Glow worm e Press to confirm the activation of the cooling instead of heating if the latter is enabled and press the button to confirm Display on main screen If enabled Wednesday 08 35 01 04 2014 mT 20 C Ext T S C COOLING 6 9 2 Enable or disable the cooling programme e Press the button and select gt cooling gt program on the screen COOLING Program Ory OFF Set up ok Select Back e Press to highlight your choice activate or deactivate and press the button to confirm 0020094585_01 08 10 Glow worm Display on main screen If enabled it will be possible
23. ram Program the time intervals Grenade for the heating f Override the program i ok Select g b Back activated The result of combining the heating and heating programme functions Function Heating Heating program Heating at ON OFF a constant room temperature Heating ON ON according to program ON enable OFF disable 6 7 1 Activating or deactivating the heating e Press Lew gt then select gt Heating gt on off on the screen CHAUFFAGE On ofF Activer 0n D sactiver COFFS ok S lection Retour e Press to highlight your choice activate or deactivate and press the button to confirm 0020094585_01 08 10 Glow worm HEATIMG On OFF Turning on your will stop your cooling Confirm VES HO ok Select Back e Press to confirm the activation of the heating instead of cooling if the latter is enabled and press the button to confirm Display on main screen If enabled it will be possible Wednesday 08 35 01 04 2014 mT 20 C Ext T D C HEATIHG 20 C To set a constant room temperature If disabled Wednesday 08 35 01 04 2014 met 20 C Ext T D C HEATIHG OFF COOLING OFF 6 7 2 Enable or disable the central heating program e Press the button and select gt Heating gt program on the screen HEATING Program Ory OFF Set up ok Select Back e Press to highlight your choice activate or deactivate and press t
24. rride the cooling program This feature allows the temporary overriding of current programs Press then select gt cooling gt override gt set up on the screen OVERRIDE On OFF ON Until 10 50 ar Adjust ok Hext Back e Enable or disable the cooling by pressing and pressing the button to confirm e Set the end time of the override with the buttons and press the button to confirm To cancel e Press then select gt cooling gt override gt off on the screen It is also possible to cancel the override from the main screen see override menu 19 Display on main screen If enabled it will be possible Wednesday 08 35 01 04 2014 mT 20 C Ext T D C OVERRIDE COOL OFF 10 30 To override the cooling program To access the override menu if more than one program is enabled cooling and hot water To cancel the override enabled in the cooling program To access the override cancel menu if more than one override is enabled cooling and hot water see override menu 6 9 5 Setting the temperature This function allows you to set the desired temperature The system automatically changes the setting in accordance with the weather conditions if the wireless outdoor sensor is installed Temperature setting values C 24 minimum maximum e Press the men button and select gt cooling gt temperature on the screen COOLING Room Temp Room Temp
25. te eteeteeeeeeeteeenes 6 6 4 MAN Te 9 ane eee ce een ene ene ern ee eee T7 6 5 Override shortcuts cece cecccceececeeeeeeeeeeseeeeeseeeeeceeeeseeeeesaeeesaees 8 6 6 Main PINS ccc ecnepuoat eine isdnneb sed cavendatandvonsbecinanensisensiedeshesdeonineenteetuenrecvins 8 6 7 FS UII Cl cruatetsceraan A eae sate cence cn nian E E E 9 6 8 FOCWA sor eee eee ec ee re ee eee ne eer 12 6 9 Cooling FUNCTION 2 cece cccceeeeeeeeeeeeeeeeeeeeeeseaeeeeeeseeeeeeeeeeeeeesaeeeees 16 010 Holiday srren snags eos era cos be rie R SNe 20 6 11 Parameters sosirii inenen irar Ea NoE a raS Eais 21 TABLE OF CONTENTS ANY ASSISTANCE TrOUDIE SNOOTING ccccccceececeececesseseueeseueeeceuseseuseseueeseueeceseeenseesneesenaass 25 Replacing the batteries ccccccccsseceseececeeeseescsesecensesenseseseseenseeesegeees 26 9 Maintenance and care of Climapro RF ceeeeeteeeeeeteesteeeneeeseeeteeens 27 9 1 CIGANINO ereer E A EE 27 9 2 Spare Parts ccccseccccsecccssececcsececssececaeececaeeeecaeeeecaeeeeseeeeseeeessees 27 10 Contact your after sales ccccccecsssceeceseeecesseeceeeeeeseeeeessaeeeesaeeeeseneeess 27 READ CAREFULLY BEFORE USING 1 Introducing your Climapro RF 1 1 Description This Climapro RF is a programmable room thermostat that is used to control a heating and or cooling system in accordance with the temperature of the room in which it is installed and the corresponding heating and or co
26. terval by time interval from the last time interval to the first e Use the button to highlight the last time interval that was set HEATIHG FROG 00 00 120 06 20 ur cies p 12 0 00 00 ar Adjust ok Hext 5 Back e Use the button to display RERNE 0020094585 _01 08 10 Glow worm The display automatically goes to mimm and deletes the programmed temperature HEATIHG FROG The setting for the paun time interval then applies up to HEREIN e Validate with the button or delete another time interval To delete another time interval e Use the button to highlight the previous time interval and perform the action again Copy a day This allows you to copy a program from one day to other days This allows the selected day to be copied to a day of the week to weekdays Monday to Friday toa full week Monday Sunday Once a day has been programmed you are automatically returned to the selection screen of the day to be programmed PROGRAM Heating Heke Tuesday Wednesday Thursday Friday Saturday Sunday ok Select Back e Select the function copy a day and press the button to confirm 11 PROGRAM Copy a day Day to copy uesday Wednesday Thursday Friday Saturday Sunday ok Select Back e Select the day to be copied with the buttons and press to confirm PROGRAM Copy a day Copy to ednesday Thursday Friday Sat
27. ton 6 8 3 Enabling or disabling the hot water heating program e Press the men button and select gt Heating gt program on the screen HOT WATER Program Ory OFF Set up ok Select Back 13 e Press to highlight your choice activate or deactivate and press the button to confirm 6 8 4 Programming hot water heating Factory setting Monday to Friday slot Saturday N of time Start Activate slot Sunday Sunday slot e Press gt then select gt hot water gt program gt define gt select a day on the screen To set an operating time slot Programming for a day begins at 00 00 with a maximum of 7 time intervals over 24 hours e Activate or desactivate water heating with the J buttons and validate with button e Define the end of the time interval with the buttons and validate with the button 14 e Begin the programming operations again if you wish to add other time intervals To modify a setting e Use the buttons go back or go forward to highlight the setting in question e Change the water heating setting or a time by pressing buttons and validate with the button To delete a time interval Deletion is performed time interval by time interval from the last time interval to the first e Use the button to highlight the last time interval that was set e Use the button to display RARUS The display automatically goes to imm
28. urday Sunday Monday Friday Monday Sunday ok Select Back e Copy to the day or group of days of your choice by selecting with and press to confirm 6 7 4 Override the heating program This feature allows the temporary overriding of current programs Press gt then select gt Heating gt override gt set up on the screen OVERRIDE Room Temp 21 0 Until mE arx Adjust ok Hext Back e Set the desired temperature with the buttons and press the button to confirm e Set the override end with the buttons and press the button a to confirm 12 To cancel e Press gt then select gt Heating gt override gt off on the screen It is also possible to cancel the override from the main screen Display on main screen If enabled it will be possible Wednesday 08 35 01 04 2014 mT 20 C Ext T D C OVERRIDE CH 21 C 10 30 To override the heating program To access the override menu if more than one program is enabled heating and hot water To cancel the override for the heating To access the cancel override menu if if more than one override is enabled heating and hot water see override menu 6 8 Hot water Menu O This menu lets you Activate or deactivate the domestic hot water heating rogram HOT WATER prog Cr r i oN Adjust the temperature of Temperature 55 C the hot water Program OH Override OFF Program the ti
Download Pdf Manuals
Related Search