Home

portable automatic ice maker

image

Contents

1. Ice basket 25 Inner tank brackt RH 28 Condenser 31 Copper tube filter 34 Silicon sealing pump 37 Plate bottom Warranty Information 2 Back panel 5 Evaporator 8 Control box 11 Inner tank bracket LH 14 Ice scoop 17 Clear window 20 Front top panel 23 Foaming asm 26 Sychronuous motor 29 DC Fan motor 32 Silicon plug drain 35 DC water pump 38 Rubber foot 3 Plate inforce 6 Control box cover 9 making box 12 Cam 15 Back btm panel 18 Displaying PCB 21 Front btm panel 24 Water filter 27 Stainless wire 30 Filter dryer 33 Nylon plug drain 36 Compressor 39 Air grille WARNING Keep ventilation openings in the appliance enclosure or in the built in structure clear of obstruction WARNING Do not damage the refrigerant circuit The manufacturer provides warranty in accordance with the legislation of the customer s own country of residence with a minimum of 1 year Germany 2 years starting from the date on which the appliance is sold to the end user The warranty only covers defects in material or workmanship The repairs under warranty may only be carried out by an authorized service centre When making a claim under the warranty the original bill of purchase with purchase date must be submitted The warranty will not apply in cases of Normal wear and tear Incorrect use e g overloading of the appliance use of non approved accessories Use of force dama
2. and use reasonable supervision when appliance is used near children Do not use your ice maker outdoors Place the ice maker away from direct sunlight and make sure that there is at least 10mm of space between the back of your unit and wall Keep a minimum distance of 10mm on each side of your unit free Do not use other liquid to make the ice cube other than water Do not clean your ice maker with flammable fluids The fumes can create a fire hazard or explosion Do not tip over If the ice maker is brought in from outside in wintertime give it a few hours to warm up to room temperature before plugging it in This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Please according to local regulations regarding disposal of the appliance for its flammable blowing gas Before you scrap the appliance please take off the doors to prevent children trapped WARNING This appliance must be earthed IMPORTANT The wires in this mains lead are colored in accordance with the following code Green or Green with a strip yellow Grounding Blue Neutral Brown Live To avoid a hazard due to instability of the appliance it must
3. be placed at an even or flat surface GETTING KNOW YOUR UNIT General instrucion Ice scoop Ice full sensor Ice basket Top cover with transparent window Air outlet Water drain cap at front btm side of the unit MAXIMUM WATER LEVEL 4 NO OS Oh Remove the ice basket you can see the water level mark Postion of control panel amp function Control Panel Easy to use visible functions touch display setting A Selected ice size displaying Small and Large B Power indicator Ice Full indicator D Water shortage indicator E Button to turn on off the unit F Button to select ice cube size CONTROL PANEL ADD WATER OPERATING PROCEDURES 4 MAINTENANCE UNPACKING YOUR ICE MAKER Remove the exterior and interior packaging Check if ice basket and scoop inside If any parts are missing please contact our customer service Remove the tapes for fixing ice shovel ice basket amp ice scoop Clean the tank amp ice basket Put the ice maker on a level amp flat counter top without direct sunlight and other sources of heat i e stove furnace radiator Maker sure that there is at least 10cm gap between the back amp LH RH sides with the wall 4 Allow one hour for the refrigerant fluid to settle before plugging the ice maker in 5 The appliance must be positioned so that the plug is accessible WARNING fill with potable water only Only use drinking water CONNE
4. CTING YOUR ICE MAKER Improper use of the grounded plug can result in the risk of electrical shock If the power cord is damaged please call our customer service oN This unit should be properly grounded for your safety The power cord of this appliance is equipped with a grounding plug which mates with standard grounding wall outlets to minimize the possibility of electric shock 2 Plug your appliance into an exclusive properly installed grounding wall outlet Do not under any circumstances damage the grounding means of the plug under any circumstances Any questions concerning power and or grounding should be directed toward a certified electrician 3 This appliance requires a standard 220 240Volt 50Hz electrical outlet with good grounding means CLEANING AND MAINTAINING YOUR ICE MAKER Before using your ice maker it is strongly recommended to clean it thoroughly k Take out the ice basket 2 Clean the interior with diluted detergent warm water and a soft cloth 3 Then use the water to rinse the inside parts and drain out the water by unplugging the drain cap on front bottom side 4 The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water 5 Dry the interior and exterior with a clean soft cloth 6 When the machine is not to be used for a long time drain water completely amp dry the interior USING YOUR ICE MAKER 1 Open the cover remove the ice ba
5. PORTABLE AUTOMATIC ICE MAKER 2 12 12 8 INSTRUCTION MANUAL It is important that you read these instructions before using your portable ice maker and we strongly recommend that you keep them in a safe place for future reference TABLE OF CONTENTS IMPORTANT SAFETY 2 PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY slice dali 3 GETTING TO KNOW YOUR 01 4 OPERATING PROCEDURES amp MAINTENANCE UNPACKING YOUR ICE 44 6 CONNECTING YOUR ICE 7 4 4 2 2 2 7 4 4 44 4 411 21 6 CLEANING AND MAINTAINING YOUR ICE 1 2 2 6 USING YOUR ICE 7 TROUBLESHOOTING 7 TECHNICAL PARAMETERS 8 CIRCUIT 8 EXPLOSIVE DRAWINGS 9 WARRANTY 10 IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important We have provided many important safety messages manual and your appliance Always read and obey all safety massages This is the safety alert symbol All safety messages will follow the safety alert symbol and t
6. ge caused by external influences Damage caused by non observance of the user manual e g connection to an unsuitable mains supply or non compliance with the installation instructions Partially or completely dismantled appliances Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable reuse of material resources To return your used device please use the return and collection systems or contact the retailer where the product was purchased They can take this product for environmental safe recycling
7. he word DANGER or WARNING These words mean You can be killed or seriously injured if you don t immediate follow instructions All safety messages will tell you what the potential hazard is tell you how to reduce the chance of injury and tell you what can happen if the instructions are not followed PREPARING YOUR ICE MAKER FOR USE When using electrical appliances basic safety precautions should be followed to reduce the risk of fire electric shock and injury to persons or property Read all instructions before using any appliance Do not operate this or any other appliance with a damaged cord If the supply cord is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard This ice maker must be positioned so that the plug is accessible Connect to properly polarized outlets only No other appliance should be plugged into the same outlet Be sure that the plug is fully inserted into the receptacle Do not run the power cord over carpeting or other heat insulators Do not cover the cord Keep cord away from traffic areas and do not submerge in water We do not recommend the use of an extension cord as it may overheat and become a risk of fire If you must use an extension cord use No 0 75 minimum size and rated no less than 16A 250V with a plug Unplug the ice maker before cleaning or making any repairs or servicing Exercise caution
8. in basket VV u RT restart the unit Remove ice from ice basket Continuous press Select button 5 seconds the unit could make ice 10 cycles even Ice indicator is on Ice cubes stick together The ice making cycle is too long Stop the ice maker and restart it when the ice blocks melt Select the small size ice cube selection Water temperature in inner tank is too low Replace the water Temperature of water recommended 8 32 C making cycle is normal but no ice formed Room temperature or water temperature in inner tank is too high The room temperature should be 10 43 C water temperature should be 8 32 C Refrigerant in system leaks cooling Verify by a qualified technician Pipe in the cooling system is blocked Verify by a qualified technician Model Protection Type Climate Type Power Ice Making Current Ice Harvest Current Refrigerant Net Weight Vesicant Enclosure HZB 12 A SN N ST T 220 240V 50Hz 0 7A 1 2A R134a 62g 9 2Kg Cs5Hi0 Plastic HZB 12 SA SN N ST T 220 240V 50Hz 0 7A 1 2A R134a 62g 9 3kg C5H10 Stainless EXPLOSIVE DRAWINGS ELECTRICAL DIAGRAM WATER LEVEL DETECTING SYCHRONUOUS MOTOR 1 POWER i E LED2S SELECT 1 Power cord 4 Magnetism valve 7 Main PCB 10 Micro switch 13 Ice scoop link 16 Back top panel 19 Touch pad 22
9. sket and pour water into tank Keep water level below the MAXIMUM water level mark 2 Press ON OFF button on the control panel to begin the ice making cycle 3 Select the ice cube size by pressing the SELECT button If the room temperature is lower than 15 C it is recommended to select small ice cube in order to avoid ice sticking together 4 The ice making cycle lasts approx 6 to 13 minutes depending on seletion of ice cube size and the room temperature The recommended room temperature is 10 C to 43 C 5 If water pump can t inject water the ice maker will stop automatically and the Add Water indicator will be on Press ON OFF button fill water up to the max water level mark and press ON OFF button again to turn on the unit again Allow the refrigerant liquid inside the compressor at least 3 minutes to settle before restarting 6 The unit stops when the ice basket is full and the Ice Full indicator will be on Warning Direct sunlight or sunlight reflection may cause infared sensor malfunction If the unit doesn t stop even ice cubes obstruct sensor move the unit where no sunlight TROUBLESHOOTING 7 Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level If unit isn t to be used drain all the water and dry the tank PROBLEM POSSIBLE CAUSE SOLUTION TECHNINCAL PARAMETERS amp CIRCUIT DIAGRAM Ice Full indicator is on Ice is full

Download Pdf Manuals

image

Related Search

Related Contents

Alain Brisson    Casio MO0606-EA User's Manual  Colonpro Manuel FR 3  取扱説明書 ^離~~~草謹呈一 児肺血 ご使用になられる前に  Furuno CI-60G User's Manual  FDXS-F(9)  OWNER`S MANUAL F S  取扱説明書 インパクトレンチ    

Copyright © All rights reserved.
Failed to retrieve file