Home

HW2500

1. 1 Disassemble all parts 2 Separate all parts according to the material they are made of e g metals rubber plastics etc Take the separated parts to the recycling facility near you for further processing Information about the locations of recycling centres may be found at your local City office or throughout an Internet search If the machine breaks down send it back to the vendor for quick repair Please enclose brief description of the defect That makes repair easier If the machine is still covered by warranty enclose the warranty card and proof of purchase receipt After the warranty period expires we repair your machine for a special price To prevent possible damages during shipping packed the machine carefully or use the original packaging material We are not liable for shipping damages due to incorrect packaging of your machine If making a Claim at the shipping company the level and method of packaging plays a major role during claim evaluation process Note Pictures and contents in this manual may slightly differ from the actual product or accessories It is due to continuous improvement of our products Such small differences have no effect on the product functionality that may cause safety hazards or injuries during work Tripping and fall may cause serious injuries namely if the falling person hits the steel rope e Never overload the steel line Observe the maximum capacity shown in the chart Not even te
2. instructions graphs and information contained herein depends on the printing date Due to continuous product improvement the manufacturer reserves the right to change technical parameters of the product without prior customer notification REPAIR AND MAINTENANCE REPORT Report and maintenance report REPAIR AND MAINTENANCE REPORT SERVICE SHOP SAFETY PRECAUTIONS e This device may be used by a qualified person 18 years or older who has been trained in work and environmental safety procedures e Any person using this equipment must possess a medical certificate demonstrating his eligibility to operate this equipment Symbols used in this manual AN Warning This symbol informs you about the risk of personal injury or damage to the machine or materials Risk of being caught by moving machine parts Beware of moving machine parts Loose clothing or body parts may get caught by moving machine parts ae Warning Danger of damage i Note Additional information Use personal safety gear AN General instructions Plastic bags and packaging materials pose danger for small children and animals Make sure you know your tool or machine and you are familiar with its operating procedure Know the hazards if not used correctly If other person will be using this machine make sure that he knows how to safely operate this equipment and that he is familiar with hazards and risk that may occur if not used corr
3. or question in timely matter Before first use please read this manual carefully It is your responsibility to study all instructions necessary for safe use and operation and to understand all risks that may be involved during the use of power machines WARNING Do not try to use this machine before reading this entire manual and before you know how to handle it Keep this manual for future reference Pay special attention to safety instructions Not complying with safety rules may cause injury to the operating person or to people standing by or it may cause damage to the machine or to the work piece Pay special attention to safety notes and safety labels on the machine Never remove or damage them Please write information such as the invoice number Po and the number of the sale receipt here in this box DESCRIPTION This hand reel is used for horizontal pulling only It is prohibited to use this reel for lifting objects or animals TECHNICAL SPECIFICATIONS Maximum load Rope length Rope diameter soes arees a Ao ee a a Ww ad eee a ee 5 5mm Gear ratio Gear ratio II Handle radius Shaft bearigs Total height without the handle Total height with the handle Total lenght Space for handle under the base Base dimensions 195 x 120 mm Netweight para oh ns a od Wop Dra th ek Aw dd Gea eg ee ea eee Rh ate aD to ae ee aac rd 6 2 kg GOSS WEINE are a ae be oe oe oh ee Oo ee a hed es OA A OE ee Oe PE SASS 6 5 kg The accuracy of
4. WARRANTY CARD 1 KH Trading machines and tools are covered by 6 24 months warranty starting on the date of purchase as described in the Civil Code proof of purchase or invoice receipt must be enclosed with the warranty card when making a claim 2 This warranty does not cover defects caused by unprofessional handling machine overloads not complying with instructions contained in this manual using accessories that are not approved unauthorized repair regular wear and tear and damages occurred during transport Further this warranty does not cover parts and accessories such as the motor carbon brushes seals and hot air operated parts and parts that need to be changed regularly 3 Ifthe repair is to be found as not covered by the warranty policy all costs including the repair and ship ping to and from the repair centre will be paid by the customer according to valid price list See www fe A N D Ei J L 4 When making a claim you must present the warranty card showing the date of the purchase the serial number of the machine vendor stamp and signature of sales clerk as well as the proof of purchase receipt 4 E 4 O oO K G 5 Warranty claim shall be made at the vendor shop where you bought your machine or you may mail it to a service centre The vendor is obligated to fill out the warranty card date of sale serial number vendor stamp and signature All these information must be filled in at the time of sale 6 The war
5. age e Do not use aggressive cleaning solution or paint thinners to clean the machine e Clean plastic parts with cloth dipped in soup water e Clean and lubricate metal surfaces with a cloth dipped in paraffin oil e lf you are not using your machine conserve it with grease and store it in dry place to prevent corrosion e Make sure that all parts work properly and that are in good working conditions Make sure that no rust or deterioration due to salt exposure are present e Do not use the reel if the rope is damaged tangled up or the diameter rope cross section is narrowed down Do not touch the rope pulley or drum during work Detailed description of the use of this device is not included in this manual because the manufacturer distributor assumes that the user is experienced in similar type of work Also according to the applicable law this device is considered as a commonly sold and used tool If the user is unfamiliar with the use of this device we recommend finding out more information about using this device at the Department of work safety Lubrication e Lubricate working surfaces with appropriate grease regularly e Make sure that all moving parts and surfaces are clean and in good working conditions
6. dily injuries Fast unwinding without load e Turn the safety clamp to its middle position and pull the rope out until you reach the required length Note e You must hold the safety clamp in this position during the entire unwinding process e In this position the reverse motion mechanism is disabled If the rope is under tension or load the drum may start spinning out of control as well as the handle which may seriously injure the operation personnel CAUTION When you fully unwind the rope leave at least 4 6 turns on the reel drum to ensure enough friction and to make sure that the rope is securely fastened on the drum Winding the rope under tension or load e Flip the safety clamp towards the drum e Turn the handle and start to reel the rope in e The safety mechanism will click on each teeth preventing the rope from going out if you release the handle Unwinding the rope under tension or load e Turn the handle in the same direction as during winding in to release the safety mechanism e Hold the handle firmly to balance for the weight of the load Flip the safety clip away from the drum e Turn the handle slowly until the rope is released no tension CAUTION When you fully unwind the rope leave at least 5turns on the reel drum to ensure enough friction and to make sure that the rope is securely fastened on the drum e Keep your machine tools clean Dirt may enter the inner mechanism of your machine and cause dam
7. e machine unless completely assembled ate O Rope reel Do not wear jewellery or loose clothing during work They may get caught by machine moving parts Use protective leather glove when handling the rope Do not handle the steel rope with bare hands Small steel wires my cut your skin We recommend using suitable skid prove shoes Cover long hair with a hat or cap entirely Keep all persons at a safe distance from the reel rope during work We recommend a distance of 1 5 times the length of the line If the line breaks under tension it may swing back vigorously and cause severe injuries or death Never step over the steel line Keep in mind that the rope is flexible and stretched under load Not complying with all safety rules may cause the rope swing back and cause injuries Use only on solid and levelled floor or ground Before starting your work make sure the reel is secured against movement Use extra caution during releasing the object Release or lower the object slowly Beware of sudden stops or sudden quick release Keep all bystanders or spectators away from the working area Keep correct posture and safe distance at all times Before starting your work get familiarized with the working environment Remove all obstacles DISPOSAL When the operational life of your device is over dispose off it in accordance with valid rules and regulations Your product is made of metal and plastic parts that may be recycled when separated
8. ectly Pay special attention to safety notes and safety labels Do not remove or damage them If the warning label becomes unreadable or damaged please contact your vendor Keep your working place clean Disorganized working area may cause accidents Never work in tight spaces or in purely lit rooms Make sure the floor is solid and stable and that you can move around easily Maintain stable posture during work Stay focused and use all your senses Pay attention to the working procedure Do not continue to work if you cannot pay attention Maintain your tools clean Handles must be kept free of grease and dirt Make sure no children unauthorized persons or animals have access to your workshop Never put your hands or legs inside the working area Never leave your machine unattended during operation Use only for purposes for which it has been designed Use personal protective gear such as safety goggles ear protection respirator safe working shoes etc Do not overreach and use both hands Never work under the influence of alcohol or other drugs Do not use the machine if you feel dizzy or week Any modifications or improvements to the machine are strictly prohibited If you discover any cracks or damages to the machine DO NOT USE Never perform any maintenance during operation If you see any unusual sign or hear any strange sound stop working immediately Do not forget to remove all wrenches and screwdrivers from the machine af
9. mporary impact load may be stronger than the maximum allowed load e Check the reel carefully before each use Any damaged part must be repaired or changed in authorized service centre e Use only identical and genuine spare parts during repairs Using unauthorized or unsuitable parts may cause severe damages to the machine property or may cause personal injuries or death e When reeling the line in or out use protective leather gloves To correctly rewind the line you must keep the rope under small tension all the time Hold the rope with one hand and use the other hand to reel the rope in Try to face away from the load and try to stand as close to the middle as possible When winding the line in make sure that the line is reeled in towards the centre of the reel drum Keep it under tension and observe that the turns are finished evenly on the drum e Make sure the rope will not slip out during reeling in e Do not use the reel if the hook safety clamp is damage or not working properly It is prohibited to use your machine without properly functioning hook clamp e A This hand reel is used for horizontal pulling only It is prohibited to use this reel for lifting objects or animals i Rope reeling mechanisms are not designed for boat anchoring or pull cart trailer fastening If you need to do such work use special equipment designed for this type of work A Power equipment e f your machine is equipped with depressed springs use suitable de
10. ranty period will be extended for the period of time for which the machine has been in the service centre possession If the repair or defect is not covered by the warranty policy all costs including the repair and shipping will be paid by the owner of the machine tool We recommend sending the machine in its original packaging Please also enclose brief description of the defect with the packaging 7 Before sending the machine for repair clean it thoroughly If the received machine is dirty it may be rejected by the service shop or you may be charged a cleaning fee SERVICE Logistic centre Klecany Topolova 483 250 67 Klecany Czech Republic Claim department phone number 266 190 156 T mobile 603 414 975 266 190 111 O2 601 218 255 Fax 260 190 100 Vodafone 608 227 255 http www KHnet cz Email servis KHnet cz Product HAND REEL 1 100 KG Type HW2500 Serial number product series Date of manufacture Repair centre notes Date of sale stamp signature Without the correctly filled warranty card or without proof of purchase receipt including the product type invoice purchase receipt no warranty claim will be processed Dear customer Thank you for purchasing power hand saw from KH Trading s r o Our company is ready to offer you our services before during and after you buy our product If you have any question comment or idea please contact our business centre We will do our best to address your comment
11. ter use Before use make sure all screws are tighten securely Perform maintenance regularly Before use make sure the machine is in good working conditions and without any damage Use only original spare parts during repairs Using non original spare parts or other parts not approved by the manufacturer may cause injury to the operating personnel Use this machine only for work that is capable of handling Use this machine only for work that is capable of handling Do not overload tools accessories or the machine For large work volume use more powerful machine Do not overload your machine Measure the work load in such way so it could be done with comfortable speed Damages due to machine overload are not covered by warranty Do not expose to extremely high temperature or direct sunlight This machine is not design for use in humid environments or under water If you are not using your machine store it in a dry and safe place out of reach of children Before use make sure that all safety elements work correctly and efficiently Make sure all moving parts are in good working conditions Before use make sure that no part is cracked or stuck Make sure all parts are attached and assembled as designed Beware of all other conditions that may have a negative effect on the proper functioning of your machine If not stated otherwise in this manual all damaged parts and safety elements must be repaired or changed AN Assembly Do not use th
12. vice to release them slowly and safely ASSEMBLY e Before throwing the packaging material out make sure no part is left inside If so take it out and install it Use the part listing for check up and the installation drawing for guidance Anchoring holes layout and dimensions 120 x 195 78 e Mount the reel on a solid structure that is capable of withstanding load of max 2 500 kg To mount the reel use screws M10 8 8 safety nuts and washers OPERATION Do not over load the reel Observe the max load specifications we When you fully unwind the rope leave at least 4 6 turns on the reel drum to ensure enough friction Rope or steel rope must be evenly wound on the drum Reel is equipped with safety mechanism against reverse motion A Never unwind the entire rope under load tension The rope may come out of the drum To fasten the rope on the drum you do not need any screws nuts or holding mechanism Fasten the rope by pushing it through the openings on the drum side as seen on the picture Before use make sure that all screws nuts and fastening clamps are securely tightened Fastening the load to the rope hook e Make sure the safety hook clamp is working properly It is prohibited to use your machine without properly functioning hook clamp Handle assembly e Put the handle on the reel shaft and secure it in place with safety nut e tis prohibited to use your machine without properly fastened handle Risk of bo

HW2500

Contents

Download Pdf Manuals

Related Search

Related Contents