Philips CEM2000 User Guide Manual - CaRadio
Contents
1. connectors Eih lol Caution e Ensure that all loose leads are insulated with electrical tape 1 Pull out the ISO connectors from car of dashboard and connect them to the bigger end of the supplied standard connector Connector Connect to 1 ANTENNA Antenna 2 REAR LINE Rear right OUT R speaker 3 REAR LINE Rear left speaker OUT L connectors 2 Connect the other end of the supplied standard connector to the unit Caution Connection for cars without ISO lead first e Be sure to connect the black ground earth 3 Connect the antenna and amplifier as illustrated if applicable You can connect illus 1 Connect the antenna and amplifier as rated if applicable the car audio to the amplifier through A B RCA TO RCA cables not supplied q Connector Connect to 1 ANTENNA Antenna 2 REAR LINE Rear right OUT R speaker 3 REAR LINE Rear left speaker OUT L Downloaded from Caradio Manual com Manuals EN 11 English f p S f b lt O f C D0 dmc o 2 Cutoffthe bigger end of the supplied standard connector 3 Check the car s wiring carefully and connect them to the supplied standard connector 1 Green black strip Left speaker Rear 2 White black strip Left speaker Front 3 Gray black strip Right speaker Front 4 Purp2. Audio from a USB drive e Audio from external devices What s in the box Check and identify the contents of your package In car audio system Remote control Rubber cushion Screw 4 pieces Disassembly tool 2 pieces Front panel Trim plate Carrying case for front panel User manual Quick start guide DBOOOQQOOOOOO Standard ISO connector SDovEhloaded from Caradio Manual com Manuals a PHILIPS o CEM2000 AUDIO SYSTEM TUNER EsP mPa Pe WMA es MP3 LINK amp SS SS SS SS J 00 0 0 l 000 hel alii Hilly RESET 1 eepenoeenae Q N 0 D L J 8 C DBB a e Turn on or off Dynamic Bass Boost Select tuner band DBB sound Select MP3 WMA folder E Scroll up menu e Unlock the panel Turn to adjust Encoder volume Downloaded from Caradio Manual com Manuals EN Overview of the main unit 0000 English O OOK MUTE e Turn the unit on or off Confirm s
3. 1 Press MENU 2 Press orv repeatedly to until DEMO is displayed L gt The screen shows current Demo mode setting 3 Rotate encoder knob to select a setting DEMO ON Turn on the demo mode DEMO OFF Turn off the demo mode Turn beep sound on off Each time you press a button the unit beeps You can turn off on this beep sound 1 Press MENU 2 Press AorY repeatedly to until BEEP is displayed 3 Rotate encoder knob to select a setting BEEP ON Turn on the beep sound e BEEP OFF Turn off the beep sound Reset You can reset the unit to tts default setting 1 Detach the front panel 2 Press the reset button by using a ball point pen or a similar tool L gt Preset adjustments such as preset channels and sound adjustments are erased 2PyovFhoaded from Caradio Manual com Manuals 8 Additional information Detach the front panel You can detach the front panel to deter theft T Press amp to release the panel 2 Press the left side of the panel rightward 3 Pullthe panel towards you to detach it from the chassis 4 Store the panel in the supplied carry case to protect it from dirt or damage Replace fuse If the fuse is damaged 1 Check the electric connection 2 Buy a fuse that matches the voltage of t
4. programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes This apparatus includes these labels CLASS 1 LASER PRODUCT Class Il equipment symbol This symbol indicates that the apparatus has a double insulation system Recycling rs Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC x Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of Downloaded from Caradio Manual com Manuals electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health C This product complies with the radio interference requirements of the European Community This product complies with the r
5. 1 1 2 0 Supported formats USB or memory file format FAT16 FAT 32 P3 bit rate data rate 32 320 Kbps and variable bit rate WMA V4 V7 V8 V9 L1 L2 SO9660 Joliet aximum title number 512 depending on file name length aximum album number 255 Supported sampling frequencies 2 kHz 44 1 kHz 48 kHz Supported Bit rates 2 256 kbps variable bit rates Directory nesting up to a maximum of 8 evels umber of albums folders CD maximum 99 USB maximum 199 Number of tracks titles maximum 999 D3 tag v2 0 or later File name in Unicode UTF8 maximum ength 64 bytes Unsupported formats 2DovFhloaded from Caradio Manual com Manuals Empty albums an empty album is an album that does not contain MP3 WMA files and is not be shown in the display Unsupported file formats are skipped For example Word documents doc or MP3 files with extension dlf are ignored and not played AAC WAV PCM audio files DRM protected WMA files wav m4a m4p mp4 aac WMA files in Lossless format 10 Troubleshooting Caution e Never remove the casing of this apparatus To keep the warranty valid never try to repair the system yourself If you encounter problems when using this apparatus check the following points before requesting service If the problem remains unsolved go to the Philips web site www philips com support When you contact Philips ensure that your apparatus is nearby and the
6. d Press OPTIONS repeatedly until AUTO SCAN is displayed then press OK MUTE to confirm L gt The six strongest stations of the selected band are saved in preset channel automatically FM1 FM2 FM3 1 6 AM1 AM2 Store staions manually 1 Tune to a station that you want to store see Tune to a radio station on page 16 2 Long Press RRESET or PRESET to enter store mode ty LCD Preset number blink 3 Short press RRESET or PRESET to select storing location 4 Press O OK MUTE to confirm L gt The station is saved in the selected channel ty LCD Preset number light up always Tune to a preset station 1 Press A or W to select band 2 Press RRESET or PRESET to select the preset station Downloaded from Caradio Manual com Manuals EN 15 English 5 Play audio files Note Ensure that the disc or device contains playable files Play a disc Note You cannot play CDs encoded with copyright protection technologies You can play commercially available audio CDs and these discs e Ensure that the disc contains playable content CD Recordables CD R CD Re writables CD RW MP3 CDs WMA CDs Note 1 Insert a CD with the printed side facing up Ly Play starts automatically To pause CD play press O OK MUTE To resume CD play pressO OK MUTE again Remove the CD To take out the CD 1 Press 4 on the front panel Pl
7. the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 With the MP3 format one CD R or CD RW can contain about 10 times more data than a regular CD W WMA Windows Media Audio An audio format owned by Microsoft is a part of Microsoft Windows Media technology Includes Microsoft Digital Rights Management tools Windows Media Video encoding technology and Windows Media Audio encoding technology 2 o Noaded from Caradio Manual com Manuals PHILIPS 2010 Koninklijke Philips Electronics N V All rights reserved Document order number CEM2000_55_UM_V1 0 Downloaded from Caradio Manual com Manuals
8. K MUTE to confirm Turn OK MUTE anti clockwise to set minute Press OK MUTE to confirm oO UAW N View clock T Press and hold OPTIONS repeatedly until the clock is displayed ThoveNoaded from Caradio Manual com Manuals 4 Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select Tuner 2 Press amp or W to select band FM1 FM2 FM3 AM1 or AM2 3 Press I or PPI to tune to a radio station manually L gt The radio station is broadcast L gt To search for a radio station automatically press kt or PPI for 3 seconds Select tuner area You can select the suitable country area of the radio 1 Press SOURCE to select Radio mode Press MENU repeatedly to select area 2 Rotate Encoder knob to select e Europe Western Europe USA United States e LATIN Latiin America ORIT Russia Select tuner sensitivity You can adjust the tuner sensitivity if you want to receive more radio stations or only stations with strong signal 1 Press OPTIONS repeatedly unti LOCAL or DX is displayed 2 Rotate amp OK MUTE to select a setting e LOCAL SEEK ON local seek on Only stations with strong signal can be broadcast e LOCAL SEEK OFF local seek off Stations with strong and weak signals can be broadcast Store radio stations in memory You can store up to 6 stations in each band Store staions automatically
9. Register your product and get support at CEM2000 www philips com welcome EN User manual PHILIPS Downloaded from Caradio Manual com Manuals Contents 1 Important Safety 4 Notice 4 2 Your car audio system 6 Introduction 6 What s in the box 6 Overview of the main unit 7 Overview of the remote control 8 3 Get started 0 Install the car audio 0 Install remote control battery 4 Turn on 4 Set clock 4 4 Listen to radio 5 Tune to a radio station 5 Store radio stations in memory 5 Store staions manually 5 Tune to a preset station 5 5 Play audio files 6 Play a disc 6 Play from USB 6 Control play 17 Search for an MP3 WMA track 17 View play information 17 Repeat play 17 Shuffle play 17 Intro play 8 Connect external sound source 8 6 Adjust sound 9 Adjust volume 9 Mute 9 Turn Dynamic Bass Boost DBB on off 19 Select preset equalizer 9 Other sound settings 9 7 Adjust system settings 20 Turn demo mode on off 20 Turn beep sound on off 20 Reset 20 8 Additional information 21 Detach the front panel 21 Replace fuse 21 Remove the unit 21 9 Product information 22 10 Troubleshooting 23 11 Glossary 24 EN 3 Downloaded from Caradio Manual com Manuals English 1 Important Safety e Read and understand all instructions before you use your apparatus If damage is caused by failure to follow instructions the warranty does not apply e This apparat
10. This device must accept any interference received including interference that may cause undesired operation Note This equipment has been tested and found o comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or elevision reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the terference by one or more of the following measures Relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Si IMPORTANT Modifications not authorized by the manufacturer may void users authority to operate this device 4DovFMloaded from Caradio Manual com Manuals The making of unauthorized copies of copy protected material including computer
11. ard to fix the sleeve Note Skip this step if the unit is not fixed by sleeve but by supplied screws Downloaded from Caradio Manual com Manuals EN 13 English Attach the front panel d Attach the trim plate 2 Insert the right side of the panel in the chassis until it is correctly engaged 3 Press the left side of the panel and point the left hole at the left pillar 4 Release the panel to engage the left side Install remote control battery pE Caution Risk of explosion Keep batteries away from eat sunshine or fire Never discard batteries in fire e Risk of decreased battery life Never mix different brands or types of batteries e Risk of product damage When the remote control is not used for long periods remove he batteries e Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate For first time use 1 Remove the protective tab to activate the remote control battery To replace the remote control batteries 1 Open the battery compartment 2 Insert 1 CR2025 batteries with correct polarity as indicated 3 Close the battery compartment Turn on 1 Press O OK MUTE to turn on the unit e To turn off the unit press OK MUTE for 3 seconds Set clock Press MENU Press amp or W repeatedly until the currently time is displayed Turn OK MUTE clockwise to set hour Press O
12. ay from USB Note Ensure that the USB device contains playable music Remove the USB device 1 2 Press O OK MUTE to turn off the unit Remove the USB device Insert the USB device 1 2 1bo Moaded from Caradio Manual com Manuals Open the cover marked lt on the front panel Insert the USB device into the USB socket t The unit starts playing from the USB device automatically Control play Folder Search Press FOLDER to enter folder search mode 2 Rotate Encoder to select a folder Song Search 1 Press SONG to enter song search mode 2 Rotate Encoder to select a track e To skip to the previous next track press 4 lt or DPI e To search backward forward rapidly within the current track press Mi or PPI for 3 seconds e To pause press O OK MUTE To resume play press O OK MUTE again Search for an MP3 WMA track Press FOLDER e Current folder name is displayed Rotate encoder knob to navigate through all folders on the disc USB e Folder name is displayed Press OK MUTE to Access into the desired folder Rotate encoder knob to select a file in the folder Press OK MUTE to play the selected file 2 Press SONG L gt Current song name is displayed Rotate encoder knob to select a file in current folder Press OK MUTE to confirm E To go back to upper level of a folder press View play informa
13. ayback Confirm selection MENU Access system menu O PWR x Turn the unit on or off Mute or restore volume Select tuner band Scroll up down menu Select MP3 WMA folder Return to previous top menu SOURCE Select audio source VOLUME Adjust volume Select EQ setting Turn on or off Dynamic Bass Boost DBB sound SONG Song Browser FOLDER Folder Browser DIS CLOCK Downloaded from Caradio Manual com Manuals P Display radio frequency and radio program type if available Display track elapsed time artist album title folder file and clock Press and hold to access illuminate dimmer settings View clock EN English 3 Get started Caution e Use the controls only as stated in this user manual Always follow the instructions in this chapter in sequence If you contact Philips you will be asked for the model and serial number of your apparatus The model number and serial number are on the bottom of your apparatus Write the numbers here Model No Serial No Install the car audio These instructions are for a typical installation However if your car has different requirements make the corresponding adjustment If you have any questions regarding installation kits consult your Philips car audio dealer EE Caution e This unit is designed for negative ground earth 12 V DC operation only e Always install this unit
14. election e Mute or restore volume a gt e Return to previous menu A e Eject disc USB socket MP3 LINK e External device socket SONG e Preset up anual store Song search FOLDER e Preset Down anual Store e Folder search O OPTIONS CLOCK e enter into Options menu e Press and hold to view clock D gt gt e Tune to a radio station Skip track e Fast forward playback le e Tune to a radio station Skip track e Fast backward playback DISP e Display radio frequency and radio program type if available e Display track elapsed time artist album title folder file and clock MENU e Access system menu v e Select tuner band Scroll down menu Select MP3 WMA folder EQ AUDIO e Press to select equalizer EQ setting e Press and hold to access audio setting menu SOURCE e Select audio source RESET e Restore default settings Qt Disc slot Q2 Panel power connection Overview of the remote control PHILIPS C RRESET e Preset down OPT e Access option menu G gt e Start play e Pause or resume play 8DovEhloaded from Caradio Manual com Manuals D S EQ OK A V DBB PRESET Preset up AUDIO Access audio setting menu ea Tune to a radio station Skip track Fast backward forward pl
15. equirements of the following directives and guidelines 2004 108 EC 2006 95 EC Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment 2010 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly EN 5 English 2 Your car audio system 8 JOO OO OO Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With the in car audio system you can enjoy your drive while you listen to FM or AM MW radio e Audio from CD or MP3 disc e
16. he damaged fuse 3 Replace the fuse T SS cay FUSE 15A e Ifthe new fuse gets damaged again there may be an internal malfunction Consult your Philips dealer Remove the unit You can remove the unit from the dashboard 1 Detach the front panel 2 Pull out the unit by using the removal keys Downloaded from Caradio Manual com Manuals EN 21 English 9 Product information Note e Product information is subject to change without prior notice Power supply 12 V DC 11 V 16 V negative ground Fuse 5A Suitable speaker 4 80 impedance Maximum power output 45 W x 4 channels Continuous power output 22 W x 4 RMS 40 10 T H D Pre Amp output voltage 2 0 V Aux in level 2500 mV Dimensions W x H x D 188 x 58 x 201 mm Weight 147 kg Radio Frequency range 87 5 108 0 MHz 100kHz F per step in auto search and search 50kHz per step in manual Frequency range 522 1620 KHz 9 kHz AM MW 530 1710 kHz 10 kHz Usable sensitivity 8 pV F Usable sensitivity 30 uV AM MW S N 20 dB Compatible USB devices e USB flash memory USB 1 1 host with interface reading all speed support 1 1 2 0 USB flash players USB 1 1 host with interface reading all speed support
17. in the car dashboard Other locations can be dangerous as the rear of the unit heats up during use e To avoid short circuit before you connect ensure that the ignition is off Ensure that you connect the yellow and red power supply leads after all other leads are connected e Ensure that all loose leads are insulated with electrical tape Ensure that the leads do not get caught under screws orin parts that will move e g seat rail Ensure that all ground earth leads are run to a common ground earth point e Use only the supplied mounting hardware for a safe and secure installation e Improper fuses can cause damage or fire When you need to change the fuse consult a professional Note on the power supply lead yellow When you connect other devices to this apparatus ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices Notes on speaker connection e Never connect speaker wires to the metal body or chassis of the car e Never connect speaker wires with stripes to one another Overview of parts These are the supplied parts needed to connect and install this unit In car audio system Sis Sleeve Front panel Trim plate Rubber cushion Disassembly tools Screws 4 pieces Standard ISO connector 5 C0000 1RovEhoaded from Caradio Manual com Manuals Connection for cars with ISO
18. le black strip Right speaker Rear e RED Ignition key 12V DC when ON ACC f BLUE Motor electric antenna relay control lead Amplifier relay control lead g BLACK Ground h ORANGE Illumination switch i YELLOW To the 12V car battery times 4 Connect the supplied standard connector to the unit which is energized at all Tip e The pin arrangement for the ISO connectors depends on the type of vehicle you drive Make sure to make the proper connections to prevent damage to the unit Mount in the dashboard 1 Ifthe car does not have an on board drive or navigation computer disconnect the negative terminal of the car battery e If you disconnect the car battery in a car that has an on board drive or navigation computer the computer may lose its memory f the car battery is not disconnected to avoid short circuit ensure that bare wires do not touch each other 2 Remove the two screws on the top of the unit 3 Remove the mounting sleeve with the supplied disassembly tools TDovFhloaded from Caradio Manual com Manuals 4 Ensure that car dashboard opening is within these measurements 6 Place the supplied rubber cushion over the end of the mounting bolt opt 53mm 7 Slide the unit into the dashboard until you hear a click sound 8 Reconnect the negative terminal of the car battery 5 Install the sleeve into the dashboard and y bend the tabs outw
19. model number and serial number are available No power or no sound Car engine is not on Turn the car engine on e Cable is not correctly connected Check connections e Fuse is burnt Replace fuse e Volume is too low Adjust volume e Ifthe above solutions cannot help press the RESET button e Ensure that the track played is of a compatible format Noise in broadcasts e Signals are too weak Select other stations with stronger signals Check the connection of the car antenna e Change broadcast from Stereo to mono Cannot play disc e Ensure that the disc label is inserted with he printed side facing up e Wipe the disc with fibre cleaning cloth from the centre to the edge in a straight ine e This disc may be defective Play another disc e Ensure that the CD is a finalised CD CD R CD RW Ensure that the CD is not encoded with copyright protection technologies The CD skips tracks e Ensure that the CD is not damaged or dirty e Ensure that random mode is deactivated Disc cannot be ejected e Press and hold Preset stations lost e Battery cable is not correctly connected Connect the battery cable to the terminal that is always live Display show ERR 12 USB data error Check the USB device Downloaded from Caradio Manual com Manuals EN 23 English 11 Glossary M MP3 A file format with a sound data compression system MP3 is
20. om Manuals 6 Adjust sound Adjust volume 1 Turn OK MUTE clockwise anticlockwise to increase decrease volume Mute You can turn off the sound of your audio 1 During play pressO OK MUTE e To turn the sound back on press OK MUTE again Turn Dynamic Bass Boost DBB on off 1 Press DBB the current setting is displayed L gt DBB ON The Dynamic Bass Boost DBB function is on L gt DBB OFF The DBB function is off 2 Press DBB again to change the DBB setting Select preset equalizer 1 Press EQ Audio L gt The current Equalizer setting is displayed 2 Press EQ Audio again repeatedly to select a preset EQ e OPTIMAL optimal FLAT flat POP pop e USER user e TECHNO techno e ROCK rock e CLASSIC classic JAZZ jazz Other sound settings You can also edit user preset EQ Audio 1 Press and hold EQ Audio for 3 seconds 2 Press AorY repeatedly to select the item to be adjusted e BAS bass range 7 to 7 e TRE treble range 7 to 7 e BAL balance range 12L to 12R L left speaker R right speaker e FAD fader range 12R to 12F R rear speaker F front speaker 3 Turn OK MUTE to select a value Downloaded from Caradio Manual com Manuals EN 19 English 7 Adjust system settings Turn demo mode on off When demo mode is on when the unit is idle for more than 2 minutes all functions are displayed
21. tion 1 During play USB device press DISP repeatedly to view e Track number and elapsed play time e Artist Album Title Folder File Repeat play 1 During play press OPTIONS repeatedly until REP is displayed 2 Rotate encoder knob to select a setting e RPT TRK repeat one track play the current track repeatedly e RPT DIR repeat a folder play all tracks in the current folder repeatedly e RPT ALL repeat all tracks play all tracks repeatedly Shuffle play You can play the tracks in random order 1 During play press OPTIONS repeatedly until SHUF is displayed 2 Rotate encoder knob to select a setting SHUF ON start shuffle play for all tracks SHUF OFF cancel shuffle play Downloaded from Caradio Manual com Manuals EN 17 English Intro play You can play the first 10 seconds of each track 1 During play press OPTIONS repeatedly until INT is displayed 2 Rotate encoder knob to select a setting INT ON After the first 10 seconds of each track have been played play stops INT OFF Cancel intro play and start normal play Connect external sound source 1 Connect the external sound source to MP3 LINK socket with a 3 5 mm cable 2 Press SOURCE repeatedly until MP3 LINK is displayed 3 Operate the external component refer to the instructions supplied with the external component 1Bo Noaded from Caradio Manual c
22. us is designed for negative ground earth 12 V DC operation only e To ensure safe driving adjust the volume to a safe and comfortable level e Improper fuses can cause damage or fire When you need to change the fuse consult a professional Use only the supplied mounting hardware for a safe and secure installation e To avoid short circuit do not expose the apparatus remote control or remote control batteries to rain or water e Never insert objects into the ventilation slots or other openings on the apparatus e Clean the apparatus and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the apparatus ever place any objects other than discs into the apparatus ever use solvents such as benzene thinner cleaners available commercially r anti static sprays intended for discs Visible and invisible laser radiation when open Avoid exposure to beam Risk of damage to the apparatus screen ever touch push rub or strike the screen with any object O Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Notice Notice of compliance The set complies with the FCC Rules Part 15 and with 21 CFR 1040 10 Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2
Download Pdf Manuals
Related Search