Home

Blue&Me™ Nav

1. O USB devices with USB wire use the wire to connect the USB device to the USB port on the car see fig 1 OTurn the ignition key to MAR Blue amp Me Nav will start automati cally to play your digital tracks select ing them from the library built at the moment the USB device is connected O After Blue amp Me Nav has built the li brary containing your digital audio files you can select and play tracks albums artists and playlists by interacting manu ally or verbally with Blue amp Me Nav Building the library may require a few minutes if your USB device contains sev eral files O You can also decide whether to play au dio files automatically when connecting the USB device or to play them upon your command For further details on media player refer to section MEDIA PLAYER FUNCTIONS gt If you encounter difficulties with any of the voice recognition operations consult section MEDIA PLAYER TROU BLESHOOTING NAVIGATION SYSTEM QUICK REFERENCE GUIDE Proceed as follows to begin using the Blue amp Me Nav navigation function O Connect the USB device provided with the Blue amp Me Nav navigation kit with the map software to the USB pre sent on the car see fig 1 O Ensure the ignition key is in MAR po sition O Press the control on the steering wheel and say Navigation Blue amp Me Nav will show the following warning message on the display THE DRIVER MUST RESPECT THE ROAD
2. Previous track While playing a digital track press and pronounce Next To play the previous track using Manual interaction proceed as fol lows While playing a track press V Or using voice interaction We While playing a digital track press and pronounce Previous Note If Previous track manual or voice com mand is given after playing the first 3 sec onds of the track the track will be played again If it is given within the first 3 sec onds the previous track will be played Changing audio source To change the current sound source Ra dio CD CD Changer Media player press SRC OK or buttons FM AM CD on sound system front panel Note For further details on voice commands keywords to be used with the media player refer to section VOICE COM MANDS KEYWORDS SUMMARY PRACTICAL HINTS FOR USING THE MEDIA PLAYER Scrolling O To optimize scrolling of the FOLD ERS menu organize folders on your USB device before connecting it to Blue amp Me Nav To facilitate and to optimize FOLDERS menu selection organize your tracks in folders with prompt names for you Organizing media files To build significant categories on Blue amp Me Nav media file data shall be properly updated To update file da ta follow the instructions given on your software instruction manual O If certain items in your library have no Artist Album Title and Genre Blue amp Me
3. at Work In this keyword Name represents the full name of acontact in your phonebook on at Mobile on at Cellular on at Cell Activates the phone function and speaks helpful information for using the hands free phone Dials the phone number of the last caller Dials the phone number of the last person called Calls a contact at Work Calls a contact at Home Calls a contact on at Mobile on at Cellular on at Cell MESSAGE READER VOICE COMMANDS r Read last one Read last one e Read last e Read last Read last message Read last message Read message Read message Read last SMS text gt gt Read last SMS text i s Read l To read the selected message in the Read last text Read last text cacagan inbox Read text Read text e Read SMS texts e Read SMS texts x Cal To st ll to the ph bi To read the last message received To read the last message received Dial e des la S e q h P one number of a Inbox e Messages received Ba Incoming messages Delete To delete the call to the phone e Texts received Delete message number of the message selected Incoming texts e Message reader Received e Messages SMS messages SMS texts SMS To display the inbox the system will display the first message contained in the inbox Next e Forward The one after To read next message nav Texts Delete all e P
4. nav The innovating Windows Mobile based Telematic Solution for the car CONTENTS OVER VIE WY oinari n E E E The hands free kitssssusinenmousisiiirousisiiirousisses Message reader scisissisissniccsnssscdeiacsescieasiassedesecsssievassstedeseoetasoneasccs Media player ccsscssssscssesssessesssedesacasascisaceiesssbsecaseieussiedeseseoatedsneaters The navigation SYSt M o esssesssesssessseesssesssstessessstessseesseessee Road safety cnccssssescssisennsnissszsvsnssessseissossdeniesesednisgsssdendbsesetnssaoasies DISPLAY AND BUTTONS ON THE STEERING HANDS FREE KIT QUICK REFERENCE GUIDE Prepare your mobile phone phonebook 0 0 esssecesseee Try out the voice commands ss s ssssssssrsssssseeesssssseresessseeesessse Pair your Mobile Phone essseessseessseesseessessseessseesseeesseeees Make a phone call cccscsssssssssccessscasestsenscisssssoscisasenssisccosessdtieosessse MESSAGE READER QUICK REFERENCE GUIDE MEDIA PLAYER QUICK REFERENCE GUIDE NAVIGATION SYSTEM QUICK REFERENCE GUIDE HOW TO USE Blue amp Me Nav uuu Steering Wheel controls ou sssscssssescsssecessscessseesssseessseeeesaee Voice commande aries rnia a Ea DEP ussen O Audio E E E A EES Blue amp Me Nav function Menu oes HANDS FREE KIT FUNCTIONS eecsssssseesssssseeeessssneee Making a phone call s scscssssssssesscssestseasosssesesecssssenssssvesessoesnsontassne INCOMING calls sissssecsssessssosssscsssacsssacse
5. tion on the vehicle s GPS position or simulate a previously calculated route O SETTINGS this submenu allows you to perform tasks such as managing your phonebook entries creating a pairing relationship or setting a connection ID Launching the Main Menu To launch the Blue amp Me Nav Main Menu press N MAIN you can then in teract with the system through the buttons on the steering wheel Navigating the menu options To navigate through the items in a menu press A or When the number of characters in a dis play message is too long for the allowable number of display characters the text in the display message will be cut to fit the display size To select the option shown on the display press SRC OK or N MAIN To quit the selected option or to exit a submenu press IESC HANDS FREE KIT FUNCTIONS Blue amp Me Nav lets you make and re ceive phone calls on your Bluetooth wireless technology enabled mobile phone using voice commands keywords or steering wheel buttons By using voice commands you can make calls to people in your phonebook by pro nouncing their first and or last name or you can make phone calls to numbers not stored in your phonebook by pronounc ing the digits of the phone number or call the last message sender By using steering wheel buttons you can make phone calls to people in your phone book or call history list by selecting the as sociated item in the LAST CALLS or P
6. Blue amp Me Nav Models Nokia 6230 firmware 5 35 Probable Cause This mobile phone can add contacts only when entries are saved on the SIM card of these mobile phones ring tones This is due to the specific features of this mobile phone ring tones Possible Solution Transfer your contact entries from the phone memory to the SIM card and then select ADD CONTACTS and try transfer contacts again gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK os eG a a a ee ee This model downloads the phonebook like pull phones and not like push phones For this reason for each contact only the predefined entry is downloaded 87 BLUE amp ME nav BLUE amp ME nav Problem Probable Cause Possible Solution After receiving answering and ending a second call the multifunction display shows INCOMING CALL PRIVATE NUMBER instead of the phone number corresponding to the first call Models Nokia 6600 Sometimes when trying to use this phone with Blue amp Me Nay using the WMAIN button the message SEARCHING CONNECTION is displayed before the connection is implemented Models Nokia 6600 No ring tone is produced when receiving a second incoming call Models Nokia 6820 Pressing MAIN for over second to reject a second incoming call disconnects also the current phone conversation Models Nokia 6820 In this specific case the system is not able to i
7. avenue etc O If the road street name is made up of several words you only need to enter one of the words making up the road street name gt If you wish to disable voice input of the road street refer to the NAVIGATION SETTINGS DICTATE DESTINATION section After entering the destination Road Street Blue amp Me Nav will ask you if you wish to enter a house number or navigate to wards the address currently set The avail able options are O ENTER NUMBER 0 START NAVIGATION GQ Using manual interaction Select the required option using the A or W keys and press SRC OK or N MAIN to confirm Or using voice interaction say En U ter number or Start If you choose Start navigation the sys tem will display the full address and ask you to confirm in order to begin naviga tion If the address entered is ambiguous the system will prompt you to choose be tween the possible alternatives If you choose Enter number you must enter the house number of the chosen destination address Proceed as follows to enter the amp house number Scroll through the numbers in the fourth row see fig 4 using the A or Y keys until the required numbers are dis played on the third row Press SRC OK or N MAIN to select the number Pro ceed in the same way to select the fol lowing numbers until the full house num ber is displayed in the second row Press the A
8. correct pronounce Dial to start the call Note When dialling a phone number by voice commands it is essential to minimize background noise in the car and to ask the other passengers to keep silent while you are speaking digits Since the system is of the speaker independent type it can rec ognize also other voices there is there fore the risk that some numbers are ac cidentally recognized added to correct numbers or not recognized Dialling a phone number using the mobile phone keypad X Alternatively you can dial a phone number using your mobile phone keypad and then continue your con versation using the hands free phone system It is a requirement that you create a pairing relationship and that the mobile phone is within range of the hands free phone system of your car To dial a phone number using your mobile phone keypad proceed as follows O Dial the phone number on your mobile phone keypad and con nect the phone call following the procedure required by your mo bile phone O Conduct the conversation using the hands free phone system O To end the phone call press N MAIN for longer than sec ond or end the phone call from your mobile phone keypad 23 BLUE amp ME nav BLUE amp ME nav 24 Calling a phone number using call history last calls LAST CALLS option is a list of the re cent calls made or received It can con sist of up to ten incoming calls up to ten
9. on specific criteria The media player will play playlists with paths leading to digital audio files in fold ers For further details on how to build playlists for Blue amp Me Nav refer to section PRACTICAL HINTS FOR USING THE MEDIA PLAYER Trade marks Microsoft and Windows are Microsoft Corporation registered trade marks Sony is a Sony Corporation registered trade mark Ericsson is a Telefonaktiebolaget LM Ericsson registered trade mark Motorola is a Motorola Inc registered trade mark Nokia is a Nokia Corporation registered trade mark Siemens is a Siemens AG registered trade mark Orange is an Orange Personal Communications Services Limited registered trade mark Audiovox is an Audiovox Corporation registered trade mark Bluetooth is a Bluetooth SIG Inc registered trade mark Lexar and JumpDrive are Lexar Media Inc registered trade marks SanDisk and Cruzer are SanDisk Corporation registered trade marks The other trade marks are proprietary of the respective Companies nav BLUE amp ME 65 nav Hine BLUE amp ME 66 VOICE COMMANDS KEYWORDS SUMMARY All the voice commands available with the Blue amp Me Nav system are shown on the following pages The main command is shown in each case followed by the possible synonyms ALWAYS AVAILABLE VOICE COMMANDS Hel Meri Activates the Help Menu function that gives a list of voice commands ava
10. outgoing calls and up to five missed calls To dial a phone number using manual interaction proceed as fol lows O Press WMAIN to open the Main Menu O Select LAST CALLS and then press SRC OK or MAIN O The system will present a list of phone numbers Use A or F to select the required phone num ber Then press SRC OK or N MAIN to start the call O To end the phone call press N MAIN for longer than sec ond gt Or using voice interaction t To call back the last incoming phone number press and pronounce Callback The system will display information about the last caller and ask if you would like to call back this contact To respond with yes pronounce Yes otherwise say No To redial the last phone number you called pronounce Redial The system will display information about the last contact you called and will ask if you would like to redial this phone number To redial the last phone number called say Yes otherwise say No INCOMING CALLS With the hands free phone system you can respond to incoming phone calls us ing steering wheel buttons When a phone call is received the system will display in formation about the caller s identity if available The incoming phone call will have cus tomized ring tone if this function is avail able on your mobile phone Answering a phone call O To answer the phone call press N MAIN O To en
11. A Quality Assistenza Tecnica Ingegneria Assistenziale Largo Senatore G Agnelli 5 10040 Volvera Torino Italia Print no 603 83 118 1 2007 I edition The data contained in this publication is intended merely as a guide FIAT reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons If you have any further questions please consult your FIAT dealer Printed in recycled paper without chlorine
12. Blue amp Me Nav navigation system allows you to reach a required location quickly and safely You will be taken to your destination by means of voice mes sages and pictogram instructions shown on a the vehicle s reconfigurable multi function display The navigation system allows you to O Enter a new destination you can enter the address of a desired destina tion specifying the name of the desti nation street with the house number or simply the town city centre O Navigate to a point of interest you can call up as a final destination a point of interest selected from a cate gory list e g hotels restaurants air ports railway stations authorised workshops etc OTrip information Blue amp Me Nav is able to provide estimated time of arrival and distance to a preset des tination It also allows you to display your car s position latitude longitude and number of GPS satellites received O Recent destinations you may choose one of the destinations recent ly preset stored by the system in a spe cial list O Navigation settings you can set your preferences for the route type e g motorways toll roads or ferries O Route simulation Blue amp Me Nav allows you to simulate the type of route to your set destination in ad vance ROAD SAFETY WARNING Operating certain parts of this system while driving can distract your attention away from the road and possi bly cause an ac
13. Me Nav media player you can play via the car sound system the digital audio files stored on a USB device by simply connecting it to the USB port lo cated in the car In this way while you are driving you can play your favourite personal music collec tions The media player enables the following op erations O Digital audio playback you can play all your digital audio files mp3 wma wav or play a customized playlist m3u or wpl format O Audio file selection by category you can play all audio files of a certain category e g album artist or genre O Playback options while playing tracks you can select the following options Play Stop Next track Previous track Shuffle and Loop track Note The media player does not support audio files compressed with other formats e g aac and DRM Digital Right Management protected audio files Non supported au dio files that may be present on the USB device will be ignored To use the media player you have to sim ply connect directly or by an extension lead your USB device to the car USB port Turning the ignition key to MAR Blue amp Me Nav will start building your media library At the end of this operation you can surf the whole library and scroll its categories as required using the but tons on the steering wheel or voice com mands Blue amp Me Nav will then play your selection via the car sound system THE NAVIGATION SYSTEM The
14. Nav menu O If after pressing N MAIN you don t take action within approx eight seconds the system will not respond to your key press O Press and pronounce the voice command again Make sure that you face forward and speak clearly at a normal volume O Press MAIN and try the operation again Make sure to take action within approximately eight seconds after pressing MAIN Problem The system prompted to enter a PIN number but no phone pairing procedure was running When in close proximity of the car answering a phone call directly using the mobile phone answer button will automatically activate the free hands phone function the caller s voice is played through the car speakers Probable Cause After you delete the pairing related user information on your mobile phone the Bluetooth pairing relationship between your mobile phone and Blue amp Me Nav will no longer work Some types of mobile phones require you to set the phone to choose between automatic incoming call transfer to the system or non automatic incoming call transfer you will transfer the call using the mobile phone keypad as required Possible Solution Select option DELETE USERS on the system and delete all pairings then pair the phone again gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE Refer to your mobile phone owner s manual to find out how
15. Shuffle on off Loop Loop track Cycle Loop on off Autoplay Autoplay media e Autoplay music Autoplay on off when connecting the USB device to the relevant port in the car gt Updates gt Interrupt Updates aa User data Deletes user data for pairing i Enters the USER DATA menu gt Pairing Starts the process to create a pairing relationship Update Activates Blue amp Me Nav updating e Pause Update e Pause Updates e Interrupt Update Pauses temporarily the current updating procedure Resume Update Resume Updates Resumes the previously paused updating procedure e Advanced Features Advanced Options Exits the SETTINGS menu Enters the ADVANCED OPTIONS menu relationships ye Delete users gt Delete phone book Download phone book Deletes the current phonebook Downloads phonebook from mobile phone to hands free phone system Note Pull phones only Adds contacts from mobile phone to hands free phone system Nota Push phones only Add Contacts Deletes all paired phone user data and phonebooks contacts and restores de fault values L Reset all il Device ID Displays the device ID Cc ti di Enters the GPRS CODE menu Pull phone means that your mobile phone supports phonebook automatic download with Blu
16. a new li brary replacing the existing one Supported digital audio files The media player supports audio files with the following formats Extension Audio coding wma It supports standards WMA release and WMA release 2 WMA2 353 WMAI 352 It supports audio formats WMA Voice mp3 file MPEG I Layer 3 sampling frequencies 32 kHz 44 1 kHz and 48 kHz and MPEG 2 layer 3 16 kHz 22 05 kHz e 24 kHz The following bit rates are supported 16 kbps 32 kbps 64 kbps 96 kbps 128 kbps and 192 kbps It also supports Fraunhofer extension MP2 5 sampling frequencies 8 kHz 1 025 kHz and 12 kHz wav digital audio file without data compression Note The media player does not support audio files compressed with other formats e g aac and DRM Digital Right Management protected audio files Non supported au dio files that may be present on the USB device will be ignored Supported playlist formats The media player supports the following playlist formats O m3u file containing a list of tracks release and 2 O wpl Windows based file containing a playlist playlist capacity limit for this format is 300Kb Playlists with exten sion wpl can be built with Microsoft Windows Media Player The media player does not support nest ed or linked playlists Playlist tracks rela tive and absolute paths are supported The media player does not support playlists built by application software based
17. amp Me Nav with different pro cedures according to your mobile phone model BLUE amp ME nav BLUE amp ME nav 12 TRY OUT THE VOICE COMMANDS At each stage of your dialogue with the system you can always use the voice com mand Help to get detailed indications about the voice commands available at the current dialogue stage To try out the Help function proceed as follows O Press the steering wheel button O After Blue amp Me Nav plays a tone indicating that voice recognition is ac tive pronounce Help Blue amp Me Nav will speak the list of voice com mands available O After the general help message is fin ished pronounce Settings and then Help Blue amp Me Nav will speak again the list of voice commands avail able for the SETTINGS menu O You can then pronounce one of the available commands and proceed with the dialogue as you like O If you need further help press and pronounce again Help PAIR YOUR MOBILE PHONE IMPORTANT Carry out this operation only with the car stopped To pair your mobile phone proceed as follows O Press and pronounce Settings then at the end of the Blue amp Me Nav message say Pairing O The system will show the phone pair ing PIN number on the multifunction display For the next two steps consult your mobile phone owner s manual about Bluetooth pairing O On your mobile phone
18. and USER DATA MAN AGEMENT tion CALL cannot be used MEDIA PLAYER Problem Probable Cause No USB device connected to the USB port in the car O No digital audio file stored on the USB memory device O If power supply is interrupted e g car battery disconnection Blue amp Me Nav will loose power temporarily In this event media li brary shall be rebuilt Displayed message NO MEDIA FOUND Or Blue amp Me Nav says No media found O Your USB memory device is not supported by Blue amp Me Nav Building the media library may require a few minutes After connecting your USB device and turnin the ignition key to MAR no music is played You may have used a USB device with the PASSWORD function enabled After inserting a USB device and turning the car key to the MAR position Blue amp Me Nav malfunctions occur e g failure to reproduce musical tracks or no voice messages Possible Solution O Follow the instructions to connect O Store digital audio files on your USB memory devices following the instructions given by your media file software O Remove the USB device from the USB port and refit it to build again the media library O Check whether your USB device is supported by Blue amp Me Nav If the time required to build the library is excessive you can intervene by reducing the number of audio files stored on your USB device Disable on the USB de
19. by Bluetooth technology or for further information see chapter LIST OF TELEPHONE SETS SUPPORTED BY Blue amp Me Nav or site www fiat com Set on menu notification settings either VISUAL ACOUSTIC notification or NOT VISUAL notification gt READER FUNCTIONS SMS MESSAGES paragraph NOTIFICATION SETTINGS SMS messages stored by Blue amp Me Nav can be deleted READER FUNCTIONS SMS MESSAGES paragraphs SMS MESSAGES MANAGEMENT AND DELETING ALL SMS MESSAGES 91 BLUE amp ME nav BLUE amp ME nav 92 Problem Some SMS messages or part of them are not read or are not correctly read by Blue amp Me Nav hands free kit Blue amp Me Nav SMS messages reader displays sender telephone number instead of sender name Sometimes received SMS message sender cannot be called Probable Cause Some special characters within received SMS message cannot be interpreted by Blue amp Me Nav Probably during portable phone registration step you chose not to download the telephone book or if your portable phone only supports the management of single contacts you chose to download some contacts only Some SMS messages e g the ones sent by telephone operator have no associ ated sender telephone number so op Possible Solution To download your cellular telephone book refer to special item on menu Settings gt SETTING FUNCTIONS paragraphs CELLULAR TELEPHONE REGISTRATION
20. current setting Note It may be useful to disable the dictate des tination function if the map used contains information in a language other than that set for voice recognition in the Blue amp Me Nav system gt For further information consult the PROBLEM SOLVING NAVIGATION SYSTEM O Restore settings Use this setting to restore the initial nav igation system settings With manual interaction proceed as amp follows Select the RESTORE SETTINGS option by pressing SRC OK or N MAIN Select YES or NO using the A or W keys and press SRC OK or N MAIN to confirm Or with voice interaction Press and say Restore set tings Blue amp Me Nav will ask you whether you wish to restore the initial factory settings by means of voice synthesis Answer Yes to proceed No to keep the current settings We Vehicle position This function allows you to find out the car s exact position expressed as a latitude North South and longitude East West shown on the reconfigurable multifunction display This function also provides infor mation on the number of GPS satellites re ceived by the Blue amp Me Nav _ To find out the vehicle s GPS posi t tion with manual interaction Activate the main Menu select the NAVIGATION option and then press SRC OK or MAIN Select the VEHICLE POSITION option and press SRC OK or N MAIN to display the required data Or with v
21. hands free phone system Problem Phone numbers containing international dialling codes e g 39 Italy 44 UK 33 France etc are difficult to call Phone specific Audiovox Orange Problem The paired phone sometimes disconnects and re connects to the car hands free phone system for no apparent reason Models Audiovox SMT 5600 Orange HTC C500 In certain cases it is not possible to call the numbers in the LAST CALLS list Probable Cause On certain mobile phones when downloading names and phone numbers to the hands free system the sign is omitted Probable Cause In the list of Bluetooth wireless technology enabled devices select Blue amp Me name identifying the Blue amp Me Nav system installed on your car In order for the Bluetooth connection to work properly the phone must recognize the car system as hands free device On certain mobile phones the sign of the international dialling code is omitted Possible Solution Replace with 00 e g 39 becomes 0039 Possible Solution After completing the pairing procedure select Blue amp Me from the list of Bluetooth wireless technology enabled devices Press the MENU button on the keypad and select option 4 Set device as Hands free then press MAIN to establish the Bluetooth connection 83 BLUE amp ME nav nav BLUE amp ME 84 Phone specifi
22. is supported by Blue amp Me Nav HOW TO CONNECT THE USB DEVICE TO Blue amp Me Nav To connect your USB device to Blue amp Me Nav proceed as follows O Copy tracks on your USB device Blue amp Me Nav recognizes wma mp3 and wav formats for audio files and wpl and m3u for playlists O USB devices without USB wire just connect the USB device directly or by an extension lead to the USB port on the car see fig 1 USB devices with USB wire use the wire to connect the USB device to the USB port on the car see fig 1 C Turn the ignition key to MAR Blue amp Me Nav will start automati cally to play your digital tracks select ing them from the library built at the moment the USB device is connected Olf AUTOPLAY is set to ON Blue amp Me Nav will start playback automatically gt SETTINGS FUNCTION MEDIA PLAYER When building the media library is over it will be possible to use Blue amp Me Nav to to select and play tracks HOW TO MANAGE THE MEDIA LIBRARY With the media player you can select the audio files stored on your USB device us ing voice commands or steering wheel buttons You can scroll audio files by folder artist genre album or playlist and then select the required category using voice commands After selecting the required category se lect the required file using manual con trols Enter track data e g title artist album genre for surfing y
23. playback Stops playback Plays next track Plays previous track Activates random track playing Deactivates random track playing Activates track repeat continues Y gt lt gt continued Loop off Loop track off Cycle off e Now playing e What s playing e What is playing e What s this track Folders Folder Browse folders e Artists e Artist Browse artists e Genres Genre Browse genres Type of music Styles e Music styles Types e Music types Albums Album Browse albums e Playlists e Playlist e Browse playlists Deactivates track repeat Displays current track data Enters media player FOLDERS menu Enters media player ARTISTS menu Enters media player GENRES menu Enters media player ALBUMS menu Enters media player PLAYLISTS menu continues gt 71 BLUE amp ME nav nav BLUE amp ME 72 lt gt continued Autoplay on e Autoplay media on e Autoplay music on Autoplay off Autoplay media off Autoplay music off e Play anything Play something e Media settings Activates automatic playback when connecting the USB device to the relevant port in the car Deactivates automatic playback when connecting the USB device to the relevant port in the car Activates playback of all digital audio tracks Enters MEDIA PLAYER menu NAVIGATION SYSTEM VOICE COMMANDS e Navigation Navigator Activate
24. select the NAVIGATION option and then press SRC OK or V MAIN Select the RECENT DESTINA TIONS option and press SRC OK or MAIN to confirm The system will show a list contain ing the most recent destinations set on the Blue amp Me Nav on the re configurable multifunction display Select the required destination us ing the A or W keys and press SRC OK or MAIN to confirm The display will show the required destination You may choose be tween the START NAVIGA TION and CANCEL DESTINA TION commands a re uired option using the keys and press RK or MAIN to confirm If you wish to delete all the stored destinations scroll through the list to display the DELETE ALL op tion Press SRC OK or MAIN to confirm Or with voice interaction press i and say Navigation Then once the system message has finished say Recent destinations Blue amp Me Nav will show a list of the latest destinations entered on the multifunctional display Select the required destination by saying Forward or Back Say Start to start navigation or Delete to delete the displayed destination If you wish to delete all the stored destinations say Delete all and confirm the operation when prompted by the system Note In order to start navigating towards the last destination selected the USB device containing the maps must be inserted in the USB por
25. tech nology your whole phonebook will be au tomatically downloaded to Blue amp Me Nav during phone pairing procedure Push phones phonebook not automatically downloaded Push phone means that your mobile phone supports the single contact down load with Bluetooth wireless technolo gy During the pairing procedure you will be required to send phonebook contacts from your mobile phone your phone book is not automatically downloaded during the phone pairing procedure Mobile phones with message reader If your mobile phone can send messages through the Bluetooth wireless tech nology it is possible to read incoming messages through the Blue amp Me Nav hands free kit to store them in the dedi cated inbox or to delete them 61 BLUE amp ME nav BLUE amp ME nav 62 List of Blue amp Me Nav supported mobile phones The following table lists the mobile phones that on the print date of this manual were accurately tested with Blue amp Me Nav For these mobile phones in section HANDS FREE KIT TROUBLESHOOTING you will find specific info for troubleshooting Make Model Automatic Non automatic Managing phonebook download phonebook download message reading Audiovox SMT 5600 OrangeTM C500 n nnn Motorola epee 860005 6620 e 3230 9500 Communicator e This mobile phone is unable to support call waiting with the hands free kit installed on your car Additional mobi
26. the NAVIGATION menu e Next maneuver Maneuver Next e Next maneuver Repeat the last voice message during navigation continued gt e Resume navigation e Resume Activate e Navigate Resume previously interrupted navigation Arrival information Information e Arrival Provides an estimated time of arrival and estimated distance from destination Interrupt navigation Interrupt navigation Suspend Interrupt Interrupt a navigation session New destination New New Destination New route Call up the menu to enter a destination e List e List e Enter number e Enter house Local number e Locally e Civic number Nearby e Number Used to select a point of interest near the car Used to enter destination address house number Elsewhere Other place Other town city e Start e Start e Start navigation Start navigating towards the Used to select a point of interest displayed destination near a selected address _ Enter road Enter street Road 2 Street Used to enter name of destination road street e City centre e Address Centre Used to enter a destination address Start navigating to the town city centre Points of interest POI Select POI Select points of interest Select Used to enter a Points of interest for a destination e List PO
27. the last message re ceived INBOX Blue amp Me Nav will store up to 20 re ceived messages in the event of linked messages the number of stored messages could be lower when your mobile phone is paired with Bluetooth When the in box is full the new incoming message will delete the oldest message received also if not read yet It is also possible to delete just one message or to delete the entire inbox refer to paragraph Managing messages To read a particular message stored in the inbox open the Blue amp Me Nav Main menu and select the op tion MESSAGE READER then press SRC OK or MAIN Select option INBOX then press SRC OK or N MAIN Scroll stored messages and select the required one the system will display the SMS text sender s data if available Select READ and press SRC OK or N MAIN Blue amp Me Nav will read the se lected message gt Or using voice interaction u Press and pronounce Message reader after the acoustic signal pronounce Inbox Blue amp Me Nav will display the first message contained in the inbox and also the phone number of the SMS text sender if stored in the phonebook To scroll the Inbox pronounce Previous or Next when the required message is displayed say Read Blue amp Me Nav will read the selected message Pronounce Delete to delete the selected message MANAGING MESSAGES For every message
28. to set up the default location for phone audio when a phone call is received BLUE amp ME nav BLUE amp ME nav 82 Problem Probable Cause Possible Solution Pairing a paired mobile phone the display screen shows Pair failed Or the system says Pairing failed Please try again After downloading the phonebook from the mobile phone contacts middle names initials prefixes or suffixes are not recognized by the voice recognition system Before re pairing with a mobile phone information for the first pairing on Blue amp Me Nav must be deleted The system does not support the use of prefixes suffixes or middle names initials when calling contacts by voice Remember that the pairing procedure will only need to be performed once for your mobile phone After this procedure Blue amp Me Nav will automatically connect to your phone each time you get into the car and turn the ignition key to MAR To pair the phone again select DELETE USERS and then re pair the phone gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE When calling contacts by voice pronounce the contact s name without using prefixes suffixes or middle names initials If you have two entries with similar first and or last name in your phonebook modify one of the entries in the mobile phone to make it unique Then re download the phonebook to the
29. will ask you to specify the point of interest country and town city in the same way as when entering an address Blue amp Me Nav will display a list of points of interest in the chosen cate gory in alphabetical order Scroll through the list using the A or Y keys and press SRC OK or N MAIN to select the point of inter est required Note If the point of interest selected using the previous options has a telephone number and your Bluetooth mobile phone is connected to Blue amp Me Nav the sys tem will ask you if you wish to start navi gating toward the chosen point of interest or make a phone call Say Start to start navigating or Call to make the phone call After making the selection Blue amp Me Nav will display the name distance and address of the point of interest and ask for confirmation in order to begin navigating Resume navigation Blue amp Me Nav allows you to resume navigation toward a set destination if nav igation has been suspended using the STOP NAVIGATION command To resume navigation using manu al interaction Activate the main Menu select the NAVIGATION option and then press SRC OK or MAIN Select the RESUME NAVIGA TION option by pressing SRC OK or MAIN Blue amp Me Nav will ask you to confirm the operation press SRC OK or N MAIN to confirm or JESC to cancel the above op eration With voice interaction press and say Naviga
30. you can call a contact in your mobile phone phone book using your voice You can also call a contact in your phonebook by scan ning through the entries on the multi function display To use this option you have to trans fer your mobile phone contacts to the hands free kit phonebook O Digit dialling by voice you can dial a phone number by speaking the digits to be dialled O To call the SMS text sender call di rectly the last SMS text sender or the sender of a message received and stored yet in the Blue amp Me Nav inbox O Receiving phone calls you can ac cept an incoming call simply by pressing a button on the steering wheel O Conference Call you can call anoth er contact while you are engaged in a phone conversation with Bluetooth phones supporting this option O Call waiting while engaged in a phone conversation you can receive notifica tion of another incoming phone call an swer the other incoming phone call and switch between two ongoing phone con versations Call waiting is only support ed by a subset of compatible mobile phones After you place your mobile phone in the car environment and create a pairing rela tionship with Blue amp Me Nav you can make phone calls by speaking keywords or pressing buttons on the steering wheel When using the hands free phone the au dio output of a phone conversation is heard through your car sound speakers MESSAGE READER The Blue
31. your mobile phone with Blue amp Me Nav O Before transferring your mobile phone contacts to the hands free system make sure that each contact first and last name is unique and distinctly rec ognizable so that the voice recognition system will function properly O The system will download only valid contact entries A valid contact entry must include both a name and at least one phone number O If you would like to re pair your mobile phone delete the old pairing relation ship first During this operation all user data will be deleted To delete the old pairing relationship use the menu option USER DATA DELETE USERS On your mobile phone delete Blue amp Me from the list of Blue tooth devices following the specific in structions for your mobile phone re fer to your mobile phone owner s man ual O If you download a phonebook with a contacts list including more than 1000 contacts the system may operate slow er than expected and voice recognition of the names in your phonebook may degrade O If the pairing relationship is accidental ly deleted the pairing procedure shall be repeated MANAGING USER DATA You can make adjustments to the user da ta used by the hands free phone system Specifically you can reset all user data for paired phones delete the phonebook or reset both user data and phonebook downloaded In this way the system is brought back to initial conditions You can also download e
32. CON SENT GRANT OF SOFTWARE LICENSE This EULA grants you the following license You may use the SOFTWARE as installed on the DEVICE DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS Speech Recognition If the SOFTWARE includes speech recognition component s you should understand that speech recog nition is an inherently statistical process and that recognition errors are inherent in the process Neither Fiat Auto S p A nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process Limitations on Reverse Engineering Decompilation and Disassembly You may not reverse engineer decompile or disassemble the SOFTWARE except and only to the extent that such activity is expressly permitted by applicable law notwith standing this limitation Single EULA The end user documentation for the DEVICE may contain multiple versions of this EULA such as multiple trans lations and or multiple media versions e g in the user documentation and in the software Even if you receive multiple versions of the EULA you are licensed to use only one copy of the SOFTWARE No Rental Except as authorized by Fiat Auto S p A you may not rent lease or lend the SOFTWARE SOFTWARE Transfer You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE provided you retain no copies you transfer all of the SOFTWARE including all component par
33. D For certain operations it might be neces sary to know the Blue amp Me Nav system code To access the system code by man amp ual interaction proceed as follows Select SYSTEM CODE and then press SRC OK or MAIN The instrument panel display will show your Blue amp Me Nav sys tem code Press SRC OK or MAIN or WESC to quit Or using voice interaction We Press pronounce Settings wait shortly for feedback and then pronounce Device ID The instrument panel display will show your Blue amp Me Nav sys tem code Press SRC OK or MAIN or WESC to quit Changing the GPRS code If your mobile phone carrier requires to change the GPRS code you can perform this operation via the ADVANCED OP TIONS menu A To change the GPRS code using manual interaction proceed as fol lows Go to the GPRS CODE menu and press SRC OK or N MAIN The display will show GPRS and a list of digits 1 2 3 4 5 6 7 8 9 DEFAULT and DISABLE To select the new GPRS code press A and W until choosing the required option then press SRC OK or N MAIN To store the default val ue select DEFAULT To disable the connection code select DIS ABLE After setting the new GPRS code Blue amp Me Nav will display the message GPRS CODE 57 BLULUE amp ME nav BLUE amp ME nav 58 gt To set the GPRS code using voice interaction proceed as follows Press pr
34. For both operating modes of steering wheel buttons short or long press the function chosen will be activated when you release the button BLUE amp ME nav nav BLUE amp ME 10 Controls Button Short press function Long press function less than second more than I second Adjust the volume of Blue amp Me Nav functions hands free kit message reader and media player voice announcements A V Scroll Blue amp Me Nav menu items Select media player tracks Scroll inbox messages Special navigation functions see NEW DESTINATION section STEERING Operation of keys when entering a town city name SRC OK Confirm manually selected menu option Switch phone conversation from the hands free phone to your mobile phone and vice versa vivavoce al telefono cellulare e vicev ersa Select audio sources Radio CD CD Changer Media Player Select displayed message Nay Start Navigation Menu ss ti sti iti Ot Blue amp Me Nav __________ Display incoming information with active navigation J 00 DIRECT SOS Access to Roadside Assistance Services Access to Infomobility Services Z O For many tasks the steering wheel buttons SRC OK and MAIN can be used interchangeably and you can use the key that is more conve nient for you to press O For both operating modes of steering wheel buttons short or long press the function chosen will be activated when
35. HEEL Buttons on the steering wheel see fig 1 are used to perform functions on the hands free kit activating voice recognition using the media player functions or select ing a Blue amp Me Nav menu option Certain buttons have multiple functions which depend on the current state of the system The function chosen in response to a key press is in some cases controlled by the duration of the key press short or long DISPLAY AND BUTTONS ON THE STEERING WHEEL Note Instructions concerning manual controls are identified in the text by symbol Q 15 BLUE amp ME nav BLUE amp ME nav VOICE COMMANDS Voice commands can be pronounced by the driver which does not need to change his her normal driving position to be heard by the system since the microphone is properly located and oriented to this pur pose Voice commands which are words rec ognized by the system are identified as keywords The hands free phone system recognizes and responds to a preset list of voice com mands The list of available voice com mands depends on the keyword level that you are currently on The current list is al ways available by pressing and pro nouncing Help or pronouncing Help after whichever question of the system Blue amp Me Nav also recognizes per sonalized versions of voice commands like the name of a contact in your phonebook There is no voice training required for us ing voice comma
36. HONEBOOK submenus In addition you can use other calling fea tures such as responding to incoming calls redial callback call waiting read a mes sage or delete it gt If you encounter difficulties with any of the voice recognition operations consult section HANDS FREE KIT TROU BLESHOOTING Notes O Before you can make and receive phone calls using the hands free kit you must create a pairing relationship for your mobile phone gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE O To activate the hands free kit the ig nition key shall be at MAR O If during a phone call you turn the ig nition key to STOP you can contin ue your conversation through the hands free kit for other 15 minutes MAKING A PHONE CALL You can make a phone call using one of the following methods O Calling a contact in your phonebook O Dialling a phone number using voice commands O Dialling a phone number using the mo bile phone keypad O Calling a phone number using call his tory last calls g Call the sender of a received SMS mes sage gt for further information refer to chap ter FUNCTIONS OF SMS MESSAGES READER paragraph SMS MESSAGES MANAGEMENT Calling a contact in your phonebook It is a requirement that you create a pair ing relationship and download your mo bile phone phonebook to the hands free phone system to use this dialing feature To call a contact in your phonebook using manual i
37. I e List POIs gt List points of interest e List points of interest e List Airport Airports Bus station Bus Coach Bus station Bus stations Ferry terminal e Ferries Le Boats e Ferry terminal Hospital e Hospitals Park and ride Car park Car parks e Police station be Police station Car Rental Agencies Car rental Provides a voice list of available categories of points of interest Select the Airport category Select the Bus Station category Select the Ferry Terminal category Select the Hospital category Select the Park amp Ride category Select the Car Park category Select the Police Station category Select the Car Rental Agencies category 73 BLUE amp ME nav nav BLUE amp ME 74 lt gt continues e Navigation e Navigator Activate the NAVIGATION menu e Next maneuver e Maneuver Next e Next maneuver Repeat the last voice message during navigation Start e Recent destinations Call up one a recent destination set e Navigation settings Use to set preferences for the type of route e Vehicle position Provides an indication of latitude longitude and number of GPS satellites visible e Route simulation J Simulation Simulates the set route Set toll Type of route Type of route Set type of route e Route Set the type of
38. Nav SUPPORTED MOBILE PHONES 60 Mobile phones with Bluetooth wireless technology 60 Pull phones phonebook automatically downloaded ou 6l Push phones phonebook not automatically downloaded 6l Mobile phones with message reader 6l List of Blue amp Me Nav supported mobile phones 62 Supported USB memory devices sessssecsssesssseeessneeeenee 64 USB memory devices sssscsessscssssccssesesssesesesesesssseseesseesese 64 Supported digital audio files oo sssessssscesssecsesseessnseesenee 64 Supported playlist formats ssssssssssssssseressssseesrsssssereesssseees 65 VOICE COMMANDS KEYWORDS SUMMARY 66 Always available voice COMMANGS sssssssssssccsseeesssseesensees 66 Hands free phone kit voice COMMANAS ssssesesstesesseeees 67 Message reader voice commands 4 ta 769 Media player voice command uw 70 Navigation system voice command ws M3 Settings function voice command wa TS TROUBLESHOOTING sees s 16 Hands free kit oo 76 General display screen ou 76 Phone specific Audiovox Orange 83 Phone specific Motorola ssssseessssseee ae 84 Phone specific Nokia s iccisisticonsmenisicuoniandnainaan 86 Phone specific Somy EricsSOM w esessssssssssssssssssssesssssssssssssees 89 Message reader aa Il Media player 0 ua 93 Navigation SystemMsinisniienii
39. Nav will show UN KNOWN in ALBUMS and GEN RES menus To enter the required da ta follow the instructions given on your software instruction manual Building the media library on Blue amp Me Nav O Building the media library may require a few minutes If the time required is excessive you can intervene by reduc ing the number of audio files stored on your USB device O While building the library it is howev er possible to play a selection of tracks Blue amp Me Nay will build the library while playing music Building playlists for Blue amp Me Nav For building m3u or wpl playlist for Blue amp Me Nav using Microsoft Win dows Media Player proceed as follows O Copy required tracks into a new fold er or to your USB memory device Open Microsoft Windows Media Player Select File Open from the menu O Scroll the content of the USB device connected to your computer and select the audio files to be entered in the playlist O Click on Open O Move to File and select Save Now Playing List As In field File Name enter the required name and in field Save as type set the type wpl or m3u Click on Save When the above steps are over the new file m3u or wpl will be built BLUE amp ME nav BLUE amp ME nav 36 FUNCTIONS OF THE NAVIGATION SYSTEM Blue amp Me Nav leads you to your cho sen destination quickly and safely by means of it
40. O Connect your USB device with pre loaded maps to the USB port on the ve hicle O Turn the ignition key to MAR Note For reasons of road safety some func tions such as input of a new destination are allowed on with the vehicle at a stand still To activate the NAVIGATION menu in manual mode proceed as follows O Press the NAV key near the front courtesy light see fig 1 O Or with the Main Menu on press N MAIN select the Navigation option and press SRC OK or MAIN Blue amp Me Nav will show the following warning message on the display THE DRIVER MUST RESPECT THE ROAD RULES Press SRC OK to con firm Now you can access the submenus dedi cated to the Blue amp Me Nav navigation functions O NEW DESTINATION O RESUME NAVIGATION O ARRIVAL INFORMATION 0 STOP NAVIGATION O RECENT DESTINATIONS O NAVIGATION SETTINGS O VEHICLE POSITION O ROUTE SIMULATION Scroll to the required function using the A or V keys and press SRC OK or N MAIN to confirm Or with voice interaction t Press and say Navigation Blue amp Me Nav will show the fol lowing warning message on the dis play THE DRIVER MUST RE SPECT THE ROAD RULES Press SRC OK to confirm no spe cific voice command is available in this event Blue amp Me Nav will display a list of the available sub menus Speak one of the following com mands to gain access to the required function O New destinat
41. ON option and then press SRC OK or S MAIN Select the option NEW DESTI NATION by pressing SRC OK or N MAIN Select POINTS OF INTEREST and press SRC OK or N MAIN to confirm 4 BLUE amp EME nav BLUE amp ME nav 42 Blue amp Me Nav will display a list of available points of interest categories Choose the required category from those stored in the map software on your USB device using the A or W device and press SRC OK or MAIN to confirm Now Blue amp Me Nav will prompt you to choose between LOCAL POINTS of interest or ELSEWHERE O If you select LOCAL POINTS of in terest by pressing SRC OK or N MAIN Blue amp Me Nav will dis play a list of points of interest belong ing to the category selected previously e g restaurants sorted according to distance from your current location in cluding distance and name Scroll through the list using the A or Y keys and press SRC OK or MAIN to select the point of interest O If you select points of interest ELSE WHERE Blue amp Me Nav will ask you to specify the point of interest country and town city in the same way as when entering an address Blue amp Me Nav will display a list of points of interest in the chosen cate gory in alphabetical order Scroll through the list using the A or Y keys and press SRC OK or N MAIN to select the point of inter est required Note If the point of interest selected usi
42. OPY PHONE BOOK in the SETTINGS menu to download the phonebook again O Enter contact information in the phonebook on your mobile phone and then download the phonebook again gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For push phones O Use the option ADD CONTACTS in the SETTINGS menu to send contacts in the phonebook on your mobile phone to the system gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK Problem Display screen shows PHONEBOOK EMPTY Or the system says Phonebook empty To add contacts to the phonebook go to the SETTINGS menu and select USER DATA To dial a phone number say DIAL Probable Cause For pull phones O You answered Yes to The data from the phonebook will now be copied onto the system Continue but the downloaded phonebook does not include any valid contacts O You have used the option COPY PHONEBOOK in the SETTINGS menu but the mobile phone phonebook does not include any valid contacts For push phones O When the system asked The data from the phonebook will now be copied onto the system Continue you answered Yes but did not send any valid contacts during the ADD CONTACTS procedure O You used the ADD CONTACTS option but did not send any valid contacts to the system Possible Solution For pull phones O Enter valid contact information name and one phone number at least in
43. RC OK or NIMAIN to confirm Press the W key again to contin ue entering characters O PESC KEY Press the JESC key to return to the previous menu 39 BLUE amp ME nav BLUE amp ME nav 40 Y gt Proceed as follows to enter liL the town city name Scroll through the characters in the fourth row using the A or W keys until the required characters are displayed on the third row Press SRC OK or MAIN to select the character Proceed in the same way to select the fol lowing characters that make up part of the town city name in the second row Press the A key to delete the last char acter entered The system will ask you to confirm the deletion by pressing SRC OK or NIMAIN If you are using voice inter action press and say Delete As soon as you have entered enough char acters Blue amp Me Nav may prompt you to say the required town city Press and say the name of the town city You still have the option of continuing to enter the destination town city manually Depending on the number of characters entered Blue amp Me Nav will display a list of towns cities whose names meet the current search criteria Scroll through the list using the A or W keys and press SRC OK or N MAIN to confirm Al ternatively you may say the name of the required town city directly Notes O If the system is able to detect the car s GPS position it will sugge
44. RULES Now say New destina tion and then Address Blue amp Me Nav will ask you the re quired country and you should say the country where your destination is lo cated The system will ask you to enter the name of the destination city starting with man ual interaction and then completing using voice commands Use the A or V keys to scroll through the characters required to make up the name of the town city and confirm each character selected by pressing the SRC OK or MAIN keys As soon as you have entered enough char acters Blue amp Me Nav will ask you to say the required town city You can also continue entering the name of the town city using the steering wheel con trols O Continue entering the destination road street using the same method as when entering the town city The town city centre may also be chosen as a destination O Specify the house number of the desti nation street by saying Enter num ber or say Start to begin navigation immediately Note For road safety reasons address input op erations may only be carried out with the vehicle parked To obtain information on all navigation sys tem functions and user instructions re fer to the NAVIGATION FUNCTIONS section gt If you are experiencing difficulty using the navigation system consult the PROB LEM SOLVING NAVIGATION SYS TEM section HOW TO USE Blue amp Me Nav CONTROLS STEERING W
45. SOFTWARE Links to Third Party Sites The SOFTWARE may provide you with the ability to link to third party sites through the use of the SOFTWARE The third party sites are not under the control of Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent Neither Fiat Auto S p A s Software Suppliers nor their affiliates nor their designated agent are respon sible for i the contents of any third party sites any links contained in third party sites or any changes or updates to third par ty sites or ii webcasting or any other form of transmission received from any third party sites If the SOFTWARE provides links to third party sites those links are provided to you only as a convenience and the inclusion of any link does not imply an endorsement of the third party site by Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent UPGRADES AND RECOVERY MEDIA If the SOFTWARE is provided by Fiat Auto S p A separate from the DEVICE on media such as a ROM chip CD ROM disk s or via web download or other means and is labeled For Upgrade Purposes Only you may install one 1 copy of such SOFT WARE onto the DEVICE as a replacement copy for the existing SOFTWARE and use it in accordance with this EULA including any additional EULA terms accompanying the upgrade SOFTWARE INTELLECTUAL PROPERTY RIGHTS All title and intellectual property rights in and to the SOFTWARE includ
46. amp Me Nav message reader enables automatic reading through the car sound system of the SMS texts you re ceive on your Bluetooth wireless tech nology mobile phone The message read er will also interpret any abbreviation and emoticon contained in the SMS text Message reader functions are managed by the control buttons on the steering wheel or by the Blue amp Me Nav voice com mands The Blue amp Me Nav message reader enables the following operations O To display on the instrument panel multifunction display a visual notifi cation signal indicating that you have received a new SMS text on your Bluetooth wireless technology mobile phone with sender s num ber name Blue amp Me Nav will also propose you to read the message re ceived O To manage the list of SMS texts re ceived on your Blue amp Me Nav paired mobile phone O To read again the messages received and stored O To call the SMS text sender using the buttons on the steering wheel or voice commands O To delete individual messages or the entire inbox using the buttons on the steering wheel or voice commands The Blue amp Me Nav system can also recognize and read abbreviations if any e g ILUVU will be read like I love you and interpret the most usual emoti cons e g will be read like Smile adopted nowadays to write SMS texts BLUE amp ME nav BLUE amp ME nav MEDIA PLAYER With the Blue amp
47. amp Me Nav to automatically establish the Bluetooth wireless technology connection To establish connection you must set your mobile phone Pressing SRC OK during an active phone call on this type of f phone dis connects the Bluetooth wireless technology connection The ability to transfer audio output for two active phone conversations to the mobile phone is not supported by the system when paired with a Nokia mobile phone Press MAIN or On your mobile phone navigate to Connectivity Bluetooth Select the next menu using the key on the right side Select Blue amp Me and then Authorized The phone call is still active on the mobile phone If you wish to reconnect and use the hands free kit again press MAIN to reconnect the phone conversation to the hands free feature Problem Adding contacts from the mobile phone to Blue amp Me Nav does not work Models Nokia 7610 When receiving a phone call on the paired mobile phone caller s info is displayed on the multifunction display but the ring tone is only produced a few seconds later Models Nokia 6230 6600 When receiving a phone call on the paired mobile phone caller s info is displayed on the multifunction display but no ring tone is produced Models Nokia 6230 After downloading the paired mobile phone phonebook some phone numbers of contacts having multiple numbers are not present on
48. ata With the NOW PLAYING option you can display current track data for 15 sec onds To start this option using manual in amp teraction proceed as follows Launch the Main Menu select ME DIA PLAYER and then press SRC OK or MAIN Select NOW PLAYING and then press SRC OK or NMAIN Or using voice interaction We Note Press and pronounce Now play 33 ing When the playback of a digital audio track is started the relevant track data will be automatically displayed for 15 seconds Audio play A To start playing an audio file using manual interaction proceed as fol lows If AUTOPLAY option is on connect your USB device to Blue amp Me Nav track playback will start automatically gt SETTINGS FUNCTION MEDIA PLAYER You can also select the required au dio file and then press SRC OK or NMAIN to start playing it Or using voice interaction ue Pause Press thing and pronounce Play any To pause the track being played Press JAIESC or button MUTE on sound sys tem front panel Play To resume playback of the paused track Press WESC or button MUTE on sound system front panel 33 BLUE amp ME nav BLUE amp ME nav 34 Stop To stop playing a track Pronounce Stop Next track To play next track using manual in wy teraction proceed as follows While playing a digital track press A Or using voice interaction We
49. c Motorola Problem Probable Cause Possible Solution When using a paired Motorola mobile phone the different location commands are not recognized by Blue amp Me Nav Sometimes the car hands free phone does not produce a ring tone at an incoming call Models Motorola V600 Motorola mobile phones do not provide location information to the hands free system when downloading the phonebook When the mobile phone sound setting is set to vibrate the hands free phone system does not produce ring tones Edit the contact information in your mobile phone phonebook If a person has multiple numbers you can create a separate contact entry for each phone number In each entry append the contact s name with H W or M as follows O Contact s NamelH this entry will represent the contact s Home number O Contact s Name W this entry will represent the contact s Work number O Contact s Name M this entry will represent the contact s Mobile number After creating separate entries for persons with multiple numbers delete the phonebook on the hands free phone and download your updated phonebook After doing this the different location commands will be directly recognized by the system oe ss ca s eae nae e sound setting is not set to vibrate while it is paired and connected to the hands free phone system Problem While handling two phone
50. cident or other serious consequences for this reason certain functions shall only be used when driving conditions are secure and if required only when the car is stopped WARNING Read and Follow Instructions before using your system read and follow all instructions and safety information provided in this end user manual User s Guide Not following precautions found in this User s Guide can lead to an accident or other serious con sequences Keep User s Guide in the car when kept in the car the User s Guide will be a ready reference for you and other users unfamiliar with the system Please make certain that before using the system for the first time all persons have access to the User s Guide and read its instructions and safety information carefully WARNING Operating certain parts of this system while driving can distract your attention away from the road and possibly cause an accident or other serious consequences Do not change system settings or enter data non verbally using your hands while driving Stop the car in a safe and legal manner before attempting these operations This is important since while setting up or changing some functions you might be required to distract your attention away from the road and re move your hands from the wheel GENERAL OPERATION Voice Command Control functions within the system may be accomplished using only voice commands Using voice commands while dri ving allows yo
51. coming one symbol pre sent only with call waiting O Symbol 2 indicates that current call is the second incoming one symbol present only with call waiting O Symbol indicates the Conference Call O Name of your current mobile phone carrier displayed if not available O Info about message received message sender phone number or name if stored in the phonebook O Data concerning the track being played by the media player O Current Blue amp Me Nav information or current menu option see fig 2 AUDIO Blue amp Me Nav uses your in car audio equipment to deliver audio output hands free phone conversation media player voice announcements and tone signals For this purpose the current audio pro gram is muted for the time needed You can always adjust the audio volume either through the radio or the steering wheel controls When the audio system is used by Blue amp Me Nav the radio display will show dedicated messages Blue amp Me Nav FUNCTION MENU Blue amp Me Nav Main Menu displays op tions within a structured list Each option item in the menu can be viewed on the instrument panel multifunction display Available options enable to activate the dif ferent functions or to change the settings of your Blue amp Me Nav system Note It is possible to navigate in the menu using the steering wheel buttons only when the car is not moving The Main Menu includ
52. connected the GPS takes about 15 minutes to ac tivate O The system is equipped with a self cal ibration function that needs to oper ate for about 100 km when the system is first turned on or if the tyres are changed During this stage the position could be calculated with less accuracy O Under continuous conditions of low wheel grip e g when skidding on ice the system may temporarily record an inaccurate position Navigation display On the control panel reconfigurable mul tifunction display see fig 3 the ma noeuvres to be carried out right turn left turn drive round round about go straight on or change direction are displayed by means of pictograms The display also indicates the name of the current street and the distance to the next turn off The name shown near the turn off is that of the street where the ma noeuvre is to be carried out F0Q0755m fig 3 A Navigation pictogram B Distance to the next turn off C Street name Voice messages The voice messages issued by the system recommend all manoeuvres to be carried in plenty of time in particular advance warning of the manoeuvre to be carried out is given followed by detailed instruc tions on when to carry out the manoeu vre To repeat the last voice message press the key and say Next maneuver START NAVIGATION Proceed as follows to begin using the Blue amp Me Nav navigation function
53. conversations via call waiting when pressing PESC only the current phone conversation is set to call waiting mode Models Motorola V600 or V525 Missed calls are not listed in the LAST CALLS Models Motorola V600 or V525 Probable Cause This is due to the specific features of these mobile phones On these mobile phones missed calls are included in the list of incoming calls gt PHONE FUNCTIONS MAKING A PHONE CALL Possible Solution 85 BLUE amp ME nav BLUE amp ME nav 86 Phone specific Nokia Problem Probable Cause Possible Solution Before establishing a connection with Blue amp Me Nav paired Nokia mobile phone the phone display screen prompts with a confirmation message e g Accept connection request During an active phone call on the hands free phone system of the car the Bluetooth wireless technology connection is disconnected when pressing button SRC OK to switch the audio output from the device to the mobile phone Models Nokia 6820 6230 7610 0 or r 6600 While handling two phone conversations via call waiting on a Nokia mobile phone when pressing SRC OK to transfer audio output to the mobile phone only one of the phone c conversations is transferred _ When pressing s SRCIOK t to 0 switch the audio output of the phone conversation from the Nokia mobile phone to the hands free kit nothing happens Nokia mobile phones do not allow Blue
54. ctions concerning voice com mands are identified in the text by sym bol We Notes O After you press if you do not issue a voice command within a few seconds the system will prompt you to pro nounce a voice command If you do not respond then voice recognition shuts off It is the same case with not re sponding to a question during a voice interaction You will hear a tone indi cating when voice recognition is deac tivated O When the system fails to recognize your voice command it will give you an other opportunity to re pronounce the voice command If you are unsure of whether the voice command is appro priate for the given context pronounce Help Using voice recognition The voice recognition system may occa sionally misrecognize a voice command To ensure that your voice commands are always recognized by the system use the following guidelines O After pressing pronounce the voice command after the system plays a tone indicating that voice recognition is ac tive O After the system asks a question wait for one second before pronouncing the response to ensure that voice recog nition is active O If you want to pronounce a command without waiting that the system has fin ished its announcement or question you can press again shortly to inter rupt what the system is saying and pro nounce your command 17 BLUE amp ME nav nav BLUE amp ME O Speak at a normal volume C Pr
55. ctiss ieseneebyesdboiasseted 37 New destination sisssca crisssssscssssescsssssssscssbicsooesssisesrieniesoonsebisecs 38 Procedure for entering destination TOWN CITY 39 Operation for steering wheel keys during input Of TOWNICITY name sississisassssssssisosssisessnsssesaasssisisnosssotisnta 39 Points of interest 4 Resume navigation 43 Arrival information 43 SCOP MAVISATION orisiirisii isisisi 44 Recent destinations occas 44 Navigation settings 45 Vehicle position 47 Route simulation lt cissssccseisoocsnsssvossesnssoosansstvssassiseosensstesesasesnesss 47 SETTINGS FUNCTIONS essssssssecosssevascassessenasssssosonssntsssvassonsnits 48 Pairing a Mobile PHONE ou sssssssescsssesesssesessseesssnesessseesesseeees 48 Managing User data sy csassdetscancaysscoushsetustnatnsnsessssesuatoasstusecconstese 5I Managing Updates ssis 54 Updating Blue amp Me Nav ou cscsssscccssssesceessseceessnseees 54 Pausing th Update issii 55 Using the phone during the updating procedure 56 Resuming the update 56 Advanced options 57 Accessing the device ID 57 Changing the GPRS code sssssssssssssessesessseeesessseereesssseeesssseee 57 Media player Settings sssusa 58 Autoplay 58 eS TIMI S A OE AEE E EE T E EA TE 59 s LOOD ceniona nuan a a 59 Exit the settings MENU ssissvasirisessssissesasosv sesasssssisasostesedzosst sisas 60 Blue amp Me
56. d the phone call press M MAIN for longer than second Rejecting a phone call O To reject the phone call press N MAIN for longer than second Ignoring a phone call O To ignore the phone call and mute the phone call ring tone press JESC Answering an incoming phone call during an active phone conversation To answer an incoming phone call while another phone conversation is active press MAIN The system will switch to the incoming phone call and put the current phone conversation on hold Note Certain mobile phones support the abili ty to transmit your contacts ring tones to the hands free phone system and play cus tomized ring tones for incoming phone calls In this case the incoming phone calls will have your mobile phone customized ring tones MANAGING PHONE CALLS Transferring a phone conversation from your mobile phone to the hands free phone system If you enter the car during a phone con versation from your mobile phone and you want to continue the conversation using the car hands free phone system you can transfer the phone conversation to it Proceed as follows O Get into he car and turn the ignition key to MAR to activate the hands free phone system O The system will send a message to your mobile phone offering hands free phone support C To transfer the conversation to the hands free phone enter the informa tion required by your mobile phone This process is different f
57. dentify which phone call is ended The connection between this mobile phone and Blue amp Me Nav some times may deactivate On this mobile phone the ring tone of the second incoming call is very low This behavior depends on the specific features of this mobile phone Wait for connection To prevent recurring of this problem reset the mobile phone by turning it off and on again The ring tone of the second incoming call will always be lower than normal Try to turn up the ring tone volume When answering an incoming call using the mobile phone keypad sometimes the mobile phone disconnects from Blue amp Me Nav and the phone conversationhas to be continued on the mobile phone instead of the hands free feature For certain software versions of this mobile phone answering a call using the keypad will automatically disconnect the mobile phone from the hands free kit Answer the incoming call by pressing MAIN Models Nokia 7610 Phone specific Sony Ericsson Problem Probable Cause Occasionally Blue amp Me Nav does not detect the mobile phone and it is unable to make a hands free phone call Models Sony Ericsson Z600 When using call waiting to answer an incoming call during an ongoing phone call conversation sometimes Blue amp Me Nav disconnects the ongoing phone conversation Models Sony Ericsson T610 This mobile phone can download contact entries only if they are sav
58. e peated EXIT THE SETTINGS MENU At the end of any of the operations de scribed above you can exit the settings menu as described below To exit the SETTINGS menu us ing manual interaction Select EXIT and then press SRC OK or N MAIN Or using voice interaction Press and pronounce Exit Blue amp Me Nav SUPPORTED MOBILE PHONES Blue amp Me Nav supports your person al devices via the Bluetooth wireless technology and USB To get updated information about the de vices supported by Blue amp Me Nav con tact Fiat Dealership or consult the dedi cated site at www fiat com MOBILE PHONES WITH Bluetooth WIRELESS TECHNOLOGY Blue amp Me Nav supports most of the mobile phones supporting Bluetooth 1 1 and HandsFree 1 0 profile refer to Blue tooth wireless connection specific ications given on your mobile phone owner s man ual Due to the different marketed software versions for mobile phones certain auxil iary functions e g answering a second in coming phone call transferring phone call from hands free phone system to mobile phone and vice versa etc could not ex actly correspond to what described in this manual In any case phone conversation us ing the hands free phone kit is not impaired Pull phones phonebook automatically downloaded Pull phone means that your mobile phone supports phonebook automatic download with Bluetooth wireless
59. e instructions specific to your mobile phone and press WMAIN when you have finished MAKING A PHONE CALL Assume that John is one of the contacts stored in your phonebook To call John proceed as follows O Press the steering wheel button and pronounce Call John O If the name is recognized the system will display the recognized contact s in formation on the display screen If there is just one phone number for John in your phonebook the system will ask if you would like to call John To start the call say Yes otherwise say No If John has several phone numbers the system will ask which phone number you would like to call e g Call John at Work or at Home Answer with the type of required phone number e g at Home If John has several phone numbers but the location i e the type of phone number like work home etc is missing the sys tem will display the selected contact and a list of related phone numbers The hands free phone system will ask if you would like to call the phone number dis played To respond with yes pronounce Yes otherwise pronounce No If this is the correct contact but the wrong num ber say Forward or Backward to navigate to the phone number you d like to call To call the displayed phone num ber pronounce Call You can also surf the phone number list manually by press ing the buttons on t
60. e performed once for your mobile phone After this procedure Blue amp Me Nav will automatically connect to your phone each time you get into the car and turn the ignition key to MAR You can create a pairing relationship us ing the USER PAIRING option in the SETTINGS menu To create a pairing relationship us ing manual interaction proceed as follows Press MAIN to open the Main Menu then select SETTINGS by pressing SRC OK or MAIN Select USER PAIRING and then press SRC OK or MAIN The system will start the pairing proce dure The system shows the mobile phone pairing PIN on the instru ment panel display and repeats it Please note that this is a PIN used just for this operation it is not your SIM PIN For the next two steps consult your mobile phone owner s manual about Bluetooth pairing On your mobile phone query for devices equipped with Bluetooth wireless technology that are within range this option on your mobile phone might be called Discover New Device etc View the list of Bluetooth wireless technology enabled devices and select Blue amp Me item that identifies Blue amp Me Nav on your car When prompted by the mobile phone enter the PIN number shown on the instrument panel dis play If pairing is successful the sys tem will say Connecting and then the display will show the paired mobile phone ID It is of vital importance to wait un til th
61. e section NAVIGATION FUNCTIONS RECENT DESTI NATIONS 99 BLUE amp ME nav BLUE amp ME nav 100 SYSTEM SOFTWARE USE NOTICE This system contains software that is licensed to Manufacturer pursuant to a license agreement Any removal reproduction reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action WARNING Hacking the Blue amp Me Nav device or installing unapproved software may lead to warranty void and compromises of safety and of the security of stored information END USER LICENSE AGREEMENT EULA You have acquired a device DEVICE which includes software licensed by Fiat Auto S p A from one or more software licen sors Fiat Auto S p A s Software Suppliers Such software products as well as associated media printed materials and on line or electronic documentation SOFTWARE are protected by international intellectual property laws and treaties The SOFT WARE is licensed not sold All rights reserved IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT EULA DO NOT USE THE DEVICE OR COPY THE SOFTWARE INSTEAD PROMPTLY CONTACT FIAT AUTO S p A FOR INSTRUCTIONS ON RETURN OF THE UN USED DEVICE S ANY USE OF THE SOFTWARE INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA OR RATIFICATION OF ANY PREVIOUS
62. e system will ask Delete all paired users To confirm pro nounce Yes Notes O Always remember that if a mobile phone is paired with the system while another phone is connected yet con nection with the current phone is in terrupted to establish the connection with the new phone O It is not possible to delete a pairing un less it is the only one O Deleting all paired users will entail a new pairing procedure Delete the phonebook In the USER DATA menu you can delete the phone that was downloaded to the system To delete the phonebook using Manual interaction proceed as fol lows Select DELETE PHONEBOOK and then press SRC OK or MAIN The system will display the question DELETE COPY OF PHONE BOOK FROM SYSTEM To confirm press SRC OK or NMAIN Or using voice interaction We Press pronounce Settings wait shortly for feedback and then pro nounce Delete phone book The system will ask Delete copy of phonebook from the sys tem To confirm pronounce Yes Download the phonebook If you chose not to download the phone book during the phone pairing procedure or if you recently deleted the current phonebook the USER DATA item will be available in the COPY PHONE BOOK menu Y To download a paired mobile phone phonebook using manual interaction proceed as follows Select COPY PHONEBOOK and then press SRC OK or NMAIN g Or using v
63. ed on the phone memory Downloading the phonebook from the mobile phone to Blue amp Me Nav does not work Models Sony Ericsson Z600 Possible Solution O Reset the mobile phone by turning it off and on again to restore connection with Blue amp Me Nav O Reset the mobile phone by turning it off removing the phone battery and then placing it back in and then turning it on again L After you hang up the other phone call _ that was received via call waiting the mobile phone displays a message that asks if you wish to retrieve the call Confirm using the mobile phone key pad Transfer your contact entries from the SIM card to the mobile phone memory Delete the phonebook from Blue amp Me Nav by selecting the option DELETE PHONEBOOK Then download the phonebook again selecting the option COPY PHONE BOOK gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK 89 BLUE amp ME nav BLUE amp ME nav 90 Problem Probable Cause Possible Solution When getting into the car during a phone conversation after turning the key to MAR the phone conversation is not switched automatically to the hands free phone system Models Sony Ericsson Z600 After pairing the mobile phone the hands free phone system keeps in memory only the last 20 calls Models Sony Ericsson Z600 After connecting and disconnecting the mobile phone the carrier s name is no longer displayed on
64. eneath trees among tall buildings in covered car parks or in tunnels O The battery has been disconnected e g during servicing O A system fault may have occurred or the GPS aerial may have been discon nected Possible Solution O Insert the USB connecting the Blue amp Me Nav maps in the USB ort P O Check that the USB device in use the same one received in the Blue amp Me Nav navigation set or check that the maps for Blue amp Me Nav are loaded on the USB device O Check the USB device is properly connected O Check that the USB device used is the same one included in the Blue amp Me Nav navigation set O Try to load the map data onto a new USB device using the Blue amp Me Nav Map Assistant software on the map CD ROM see the Blue amp Me Nav Map Assistant quick guide in the Blue amp Me Nav navigation set O Move the car to an open area where the GPS signal reception is good or wait until the obstacle has passed if the vehicle is moving Wait at least 15 minutes to allow the system to calculate the correct GPS position again O Consult a Fiat dealer BLULUE amp ME 97 Mav nav BLUE amp ME 98 Problem The display indicates ROUTE CALCULATION NOT POSSIBLE It is not possible to call the telephone number for a point of interest e g Restaurant It is not possible to delete the list of RECENT DESTINATIONS Probable Cause The car is located
65. es the following op tions O LAST CALLS this submenu allows you to view a list of the recent calls made or received This list is either downloaded from your mobile phone memory or accumulated via use of the hands free phone or both O PHONEBOOK this submenu allows you to view the phone numbers in your phonebook and to select one to dial If there is a large amount of entries in your phonebook then the items will be contained in groups within alpha betical submenus indicating the contacts within that group The number of con tacts within a group depends on the amount of entries in your phonebook 19 BLUE amp ME nav nav BLUE amp ME 20 O MESSAGE READER This submenu enables to read the last message re ceived to call the message sender or to delete the last message received It is possible to store up to 20 received messages in the dedicated inbox and to play them later to call the message sender or to delete the messages It is possible to select notification sig nals for the arrival of a new SMS text O MEDIA PLAYER this submenu al lows to scroll the digital audio tracks in the library by folder artist genre al bum or by playlist This sub menu is to be used to select and play tracks O NAVIGATION this submenu gives access to Blue amp Me Nav navigation functions You can enter a new destination use a recent destination alter the naviga tion settings gain access to informa
66. etooth wireless technology your whole phonebook will be automatically down loaded to the hands free kit during phone pairing procedure Push phone means that your mobile phone supports the single contact download with Bluetooth wireless technology During the pairing procedure you will be required to send phonebook contacts from your mobile phone your phonebook is not automati cally downloaded during the phone pairing procedure 75 BLUE amp ME nav BLUE amp ME nav TROUBLESHOOTING HANDS FREE KIT General display screen Problem Display screen shows NO PHONEBOOK FOUND Or the system says As requested the phonebook has not been copied To copy the phonebook onto the system go to SETTINGS menu and select USER DATA To dial a phone number say Dial Probable Cause For pull phones O When the system asked The data from the phonebook will now be copied onto the system Continue you responded with No O You have not downloaded your phonebook via the SETTINGS menu O The downloaded phonebook was deleted For push phones O When the system asked The data from the phonebook will now be copied onto the system Continue you responded with No O You have not sent contacts to the system using the ADD CONTACTS procedure O The downloaded phonebook was deleted Possible Solution For pull phones O Use the option C
67. g a mobile phone O Managing user data O Managing Blue amp Me Nav update O Media player settings O Advanced Options To perform functions and adjustments in the SETTINGS menu you may use but tons on the steering wheel or voice com mands at car standstill When the car is moving you can use voice commands on ly Instructions are provided for both methods gt If you encounter difficulties with any of the Blue amp Me Nav settings consult section TROUBLESHOOTING PAIRING A MOBILE PHONE Before you can use your mobile phone with the hands free phone function on your car you must create a pairing rela tionship between the mobile phone and the hands free phone system During the pairing procedure the hands free phone system attempts to detect a phone equipped with Bluetooth wire less technology within range and then es tablishes the connection using a Personal Identification Number PIN After a pair ing relationship is established you can use the hands free phone system to make and receive phone calls and do other opera tions via your wirelessly connected mo bile phone IMPORTANT The mobile phone pairing PIN number is a special PIN generated randomly at each new pairing and used just for this operation It is not your SIM PIN and therefore it is not required to store or to keep it in mind loosing it will not impair the hands free phone system operation The pairing procedure will only need to b
68. g using manual in teraction proceed as follows During updating select SET TINGS PAUSE UPDATE Then select it with button SRC OK or N MAIN Blue amp Me Nav will display the message UPDATE PAUSED and say Update paused O Turn the ignition key to STOP 55 BLUE amp ME nav BLUE amp ME nav 56 Using the phone during the updating procedure During the updating procedure it is how ever possible to make or answer a call Blue amp Me Nav will pause the updating procedure and resume it at the end of the phone conversation automatically To make or answer a call during the up dating procedure using manual interaction refer to sections MAKING A PHONE CALL and INCOMING CALLS The updating procedure will be paused au tomatically Ending the phone call will resume the up dating procedure automatically Resuming the update If the updating procedure is paused using the settings menu option the updating pro cedure shall be then resumed manually To resume the updating procedure using manual interaction proceed as follows O Your mobile phone shall be paired with Blue amp Me Nav O Press MAIN and move to SET TINGS RESUME UPDATE this menu option is available only if update has been previously paused Press SRC OK or MAIN O Blue amp Me Nav will display the mes sage RESUME UPDATE and say Update On completion a mes sage will appear If the updating procedure
69. he media library Certain commands are not available when the track is paused or the CD player is playing a track Possible Solution Your playlist contains DRM protected For further details see section SUPPORTED USB MEMORY DEVICES O Your playlist contains DRM If the track is paused resume playback by pressing PESC Then pronounce the voice command again 95 BLUE amp ME nav BLUE amp ME nav 96 Problem Probable Cause Possible Solution The same USB memory device previously connected takes more than 10 seconds to restart playback on Blue amp Me Nav You removed the USB memory device from the PC before it was ready To reset the USB memory device using Microsoft Windows XP click on My Computer in the Start menu click rightwards on the USB memory device select Properties select Tools click on key Check Now in field Error checking select Automatically fix file system errors and then click Start To avoid future problems remove the USB device using the option Secure hardware removal NAVIGATION SYSTEM Problem The display indicates INSERT USB MEMORY WITH MAPS The display indicates WAIT NO GPS SIGNAL Probable Cause O No USB device is connected O The USB device connected does not contain map data O The USB device is faulty or connected incorrectly O GPS signal reception could be hin dered if the car is located b
70. he steering wheel A or V until you find the required number Now press MAIN or SRC OK to start the call O To end the phone call press MAIN for longer than second gt If you encounter difficulties with any of the voice recognition operations consult section HANDS FREE KIT TROU BLESHOOTING 13 BLUE amp ME nav BLUE amp ME nav 14 MESSAGE READER QUICK REFERENCE GUIDE If your mobile phone with Bluetooth wireless technology supports the message reader function at the arrival of a new SMS text Blue amp Me Nav plays a tone and it will ask if you would like to read it O pronounce Yes or press MAIN or SRC OK to read the last message received O pronounce No or press ESC the system will store the message so you can read it later For further details on the message read er SMS refer to section MESSAGE READER FUNCTIONS gt If you encounter difficulties with any of the message reader settings consult sec tion MESSAGE READER TROU BLESHOOTING MEDIA PLAYER QUICK REFERENCE GUIDE To start playing the digital audio files stored on your USB device proceed as follows O Copy tracks to your USB device Blue amp Me Nav recognizes wma mp3 and wav formats for audio files and wpl and m3u formats for playlists O USB devices without USB wire just connect the USB device directly or by an extension lead to the USB port on the car see fig 1
71. hone query for devices equipped with Bluetooth wireless technology that are within range this option on your mobile phone might be called Discover New Device etc View the list of Bluetooth wireless technology enabled devices and select Blue amp Me item that identifies the hands free kit in your car When prompted by the mobile phone enter the PIN number shown on the instrument panel dis play using your mobile phone key pad If pairing is successful the sys tem will say Connecting and then the display will show the paired mobile phone ID It is of vital importance to wait un til this confirmation message is dis played since pressing S MAIN or SC at this time may cancel the pairing process If pairing fails an er ror message will be displayed and the pairing procedure shall be re peated At first pairing the system will say Welcome immediately after connecting This message will no longer be heard at next pairing pro cedures The system asks if you would like to copy your paired phone phone book It is recommended to copy it To start copying the phonebook pronounce Yes otherwise say No For certain mobile phones the phonebook is not copied automat ically in this case you must send the contacts in your mobile phone phonebook to the hands free phone system using your mobile phone keypad If the hands free phone sys tem asks you to do this then per form this pr
72. ice commands or buttons on the steering wheel THE HANDS FREE KIT The basic characteristic of this hands free kit is voice recognition with Bluetooth wireless technology With this system you can make and receive calls safely and se curely using either voice commands or buttons on the steering wheel under what ever driving condition without having to take your eyes off the road or removing your hands from the steering wheel as re quired by current law regulations Bluetooth wireless technology enables wireless connection between your mobile phone and the hands free kit installed on your car To use the hands free kit you need a Bluetooth wireless technology enabled mobile phone This hands free kit gives you the possibility of interacting vocally with your mobile phone while driving even if your mobile device does not fea ture this capability You can also interact with your mobile phone manually and vi sually using the steering wheel controls and the instrument panel multifunction dis play For further details on the mobile phones supported by Blue amp Me Nav refer to section Blue amp Me Nav SUPPORTED MOBILE PHONES To get started with Blue amp Me Nav hands free kit with voice recognition you have to simply pair your Bluetooth wireless technology enabled mobile phone with the system Pairing is an operation that has to be made only once BLUE amp ME nav BLUE amp ME nav Note Duri
73. ilable for the current context Cancel Cancels voice interactions and deactivates the voice recognition system e Repeat Repeats the last spoken utterance HANDS FREE PHONE KIT VOICE COMMANDS Dial e Dial a number Activates the voice recognition of a phone number _ One Two Three e Four Five e Six e Seven Eight Nine Zero Plus e Star PLULLEELUEEL Dials the digit 1 Dials the digit 2 Dials the digit 3 Dials the digit 4 Dials the digit 5 Dials the digit 6 Dials the digit 7 Dials the digit 8 Dials the digit 9 Dials the digit 0 Equivalent to pressing Equivalent to pressing Pound Delete Start over e Repeat Call Dial EEL Equivalent to pressing Deletes the last group of numbers Deletes the phone number that you pronounced and you can restart dialling The system repeats the number that you pronounced Dials the phone number that you pronounced continues gt 67 BLUE amp ME nav nav Ue BLUE amp ME 68 Z gt continued Call Name Call Name at Work at Home on at Mobile on at Cellular on at Cell Starts the process to call a contact in the phonebook transferred to the hands free kit Telephone Phone Callback e Redial Calls a contact
74. in a country or region whose maps are not present on the USB device and the destination entered is not therefore available O The mobile phone registered is off O Your Bluetooth mobile phone is not registered O The registered mobile phone is not within the system s radius of action it must be located within 10 metres of the system O The Bluetooth connection between the system and mobile phone has been disabled on your mobile phone Blue amp Me identifier O The telephone number of the selected point of interest is not available on the map Incorrect selection of the deletion function Possible Solution Ensure that the preloaded map software contains all the countries or regions required to define the required route from the car s current position to the destination O Turn on the mobile phone O Register the mobile phone gt SETTING FUNCTIONS REGISTER MOBILE PHONE O Ensure the mobile phone you have registered on the car s handsfree system is within the system s radius of action O Ensure that the Bluetooth connec tion to the car s handsfree system Blue amp Me identifier is activated on your mobile phone g You can delete the entire list of recent des tinations by selecting the DELETE ALL option or by speaking the command delete all with voice interaction gt NAVIGATION FUNCTIONS RECENT DESTINATIONS PERSONAL DATA PROTECTION The func
75. in the playlist using your media file software Delete bad media from your USB device O To change the current audio source press button SRC OK or the dedicated buttons FM AM CD on the sound system front panel O With ignition key at MAR insert and then remove the USB device from the car USB port O To avoid displaying of MEDIAPLAYER indication in absence of USB device always remove the USB device when the ignition key is at MAR or stop playback with voice command STOP before removing the USB device from the car USB port Problem Displayed message PROTECTED CONTENT Or Blue amp Me Nav says Protected content Blue amp Me Nav does not play all the digital audio files in the playlist The media library does not show all the digital audio files stored on the USB device After pronouncing a command Blue amp Me Nav says Command not available although the command you prompt is a first level voice command Probable Cause The track selected is DRM protected and it cannot be played by the media player files that cannot be played or it contains references to invalid media files protected files that are ignored during playback O Your playlist contains more than 20 000 tracks that is the max number of files that can be copied to the media library O The playlist stored on your USB device contains more than 20 nested folders Nested folders files will not be copied to t
76. ing but not limited to any images photographs anima tions video audio music text and applets incorporated into the SOFTWARE the accompanying printed materials and any copies of the SOFTWARE are owned by Fiat Auto S p A s Software Suppliers their affiliates or suppliers The SOFTWARE is licensed not sold You may not copy the printed materials accompanying the SOFTWARE All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties This EULA grants you no rights to use such con tent All rights not specifically granted under this EULA are reserved by Fiat Auto S p A s Software Suppliers their affiliates and suppliers Use of any on line services which may be accessed through the SOFTWARE may be governed by the respective terms of use relating to such services If this SOFTWARE contains documentation that is provided only in electronic form you may print one copy of such electronic documentation EXPORT RESTRICTIONS You acknowledge that the SOFTWARE is subject to U S and European Union export jurisdiction You agree to comply with all applicable international and national laws that apply to the SOFTWARE including the U S Export Administration Regulations as well as end user end use and destination restrictions issued by U S and other g
77. intain the current setting O Set tolls Use this setting to tell Blue amp Me Nav whether you wish to include sections of road that require payment of a toll in the route calculation ue A With manual interaction proceed as follows Select the SET TOLLS option by pressing SRC OK or MAIN Select YES or NO using the A or W keys and press SRC OK or N MAIN to confirm Or with voice interaction Press and say Set tolls Blue amp Me Nav will tell you the current setting using voice synthe sis and will ask you if you wish to change it Answer Yes to change the option No to maintain the current setting O Dictate destination We Use this setting to set your preference for voice completion during destination input if you wish to set DICTATE DESTI NATION to NO the destination will be entered in exclusively manual mode It will not therefore be possible to complete the town city or road name by voice _ With manual interaction proceed 0 as follows Select the DICTATE DESTINA TION option by pressing SRC OK or MAIN Select YES or NO using the A or Y keys and press SRC OK or N MAIN to confirm Or with voice interaction i Press and say Dictate destina tion Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the option No to main tain the
78. io files the ALBUMS menu can be subdi vided into alphabetical sub menus Alpha betical sub menu can display just the first letter of the tracks it contains e g A F or it can display the first two letters e g Aa Ar Selection by playlist Playlists stored in your USB device can be displayed with the PLAYLISTS menu a D We To select a playlist using manual in teraction proceed as follows Launch the Main Menu select ME DIA PLAYER and then press SRC OK or N MAIN Select PLAYLISTS and press SRC OK or MAIN Scroll playlists To play the displayed playlist press SRC OK or NMAIN Or using voice interaction Press and pronounce Playlists Scroll playlists To play the displayed playlist press SRC OK or MAIN For further details on how to build playlists refer to section PRACTICAL HINTS PLAYING AUDIO TRACKS Shuffle playback of the whole media library Option PLAY ANYTHING shall be used to play quickly the whole content of your media library at random To start PLAY ANYTHING us ing manual interaction proceed as follows Launch the Main Menu select ME DIA PLAYER and then press SRC OK or NIMAIN Select PLAY ANYTHING and press SRC OK or MAIN g Or using voice interaction Press thing and pronounce Play any For further details on digital audio files playback refer to section DIG ITAL AUDIO SELECTION Now playing track d
79. ion O Resume navigation O Arrival information O Stop navigation O Recent destinations O Navigation settings O Vehicle position O Route simulation Note Some submenus may not be available since they are activated only once navigation to wards a destination has started 37 BLULUE amp ME Mav BLUE amp ME nav 38 New destination The NEW DESTINATION menu al lows you to enter a destination in various ways O ADDRESS set the address by choos ing a town city centre or the required street O POINTS OF INTEREST select a point of interest from the relevant sub menu UN WARNING For road safety reasons it is only possible to enter a new destination with the car at a stand still Address Use this menu to enter the address of your required destination indicating the country the town city the name of the road street and the house number To enter an address using manual in 0 teraction Activate the main Menu select the NAVIGATION option and then press SRC OK or MAIN Select the NEW DESTINATION option by pressing SRC OK or N MAIN Select ADDRESS and then press SRC OK or N MAIN Or use voice interaction by pressing and saying Navigation Once the system message has finished say New destination and then Ad dress ue Blue amp Me Nav starts by asking your to select the required country name Before anything else the system de termine
80. is confirmation message is dis played since pressing S MAIN or ESC at this time may cancel the pairing process If pairing fails an er ror message will be displayed and the pairing procedure shall be re peated At first pairing the system will say Welcome immediately after connecting This message will no longer be heard at next pairing pro cedures We The system asks if you would like to copy your paired phone phone book It is recommended to copy it To start copying the phonebook press SRC OK or MAIN oth erwise press PESC You can down load your phonebook at a later time using the menu option SET TINGS USER DATA PHONE BOOK For certain mobile phones the phonebook is not copied automat ically in this case you must send the contacts in your mobile phone phonebook to the hands free phone system using your mobile phone keypad If the hands free phone sys tem asks you to do this then per form this procedure following the instructions specific to your mobile phone and press MAIN when you have finished Or using voice interaction Press and pronounce Settings wait shortly for feedback and then pronounce Pairing The system shows the mobile phone pairing PIN on the instru ment panel display and repeats it 49 BLUE amp ME nav BLUE amp ME nav 50 For the next two steps consult your mobile phone owner s manual about Bluetooth pairing On your mobile p
81. is used to display the character selected using SRC OK or N MAIN D The fourth row is made up of two parts you may scroll through the charac ters shown on the left side of the display using the A key and those displayed on the right part using the W key Once you have entered two characters Blue amp Me Nav will help you by dis playing only the letters that could poten tially be used to compose the final name of the town city according to the map in formation stored in your USB device Operation of steering wheel keys during TOWNICITY name input O KEY A Allows you to scroll through the characters shown on the left side of the fourth row of the display Once you have entered two char acters if you press the A key once you will be given the option of deleting the last character en tered press SRC OK or WWMAIN to delete Press the A key again to continue entering charac ters O KEY V Allows you to scroll through the characters shown on the right side of the fourth row of the display Once you have entered two char acters if you press the Y key once OK will be displayed on the third row of the display This prompts you to stop entering char acters and instead choose the town city name from a list You are only advised to use this option if the name of the town city shown on the second row is the full name of the required town city Press S
82. ist using manual interaction pro ceed as follows Launch the Main Menu select ME DIA PLAYER and then press SRC OK or NIMAIN Select ARTISTS and then press SRC OK or MAIN Scroll artists To select the required artist press SRC OK or MAIN Scroll the artist s albums To play all the albums of the required artist se lect PLAY ALL and press SRC OK or N MAIN To play an album select the re quired album and then press SRC OK or MAIN To play a track select the title and then press SRC OK or MAIN 1 Or using voice interaction Press and pronounce Artists Scroll the artist s albums To play all the albums of the required artist se lect PLAY ALL and then press SRC OK or N MAIN To play an album select the required album and then press SRC OK or NMAIN To play a track select the title and then press SRC OK or N MAIN Note If your USB device contains many audio files the ARTISTS menu can be subdi vided into alphabetical sub menus Alpha betical sub menu can display just the first letter of the tracks it contains e g A F or it can display the first two letters e g Aa Ar Selection by genre To select the tracks of a special wc genre using manual interaction pro ceed as follows Launch the Main Menu select ME DIA PLAYER and then press SRC OK or MAIN Select GENRES and then press SRC OK or VWMAIN Scroll genres To play all the tracks of the di
83. ither the phonebook or single contacts from your mobile phone to the system if you chose not to down load the phonebook during the phone pairing procedure You can make adjust ments to the user data used by the system using the option USER DATA To open the USER DATA menu using manual interaction proceed as follows Press MAIN to open the Main Menu then select SETTINGS by pressing SRC OK or N MAIN Select USER DATA and then press SRC OK or MAIN 51 BLUE amp ME nav BLUE amp ME nav 52 0 Or using voice interaction t Press and pronounce Settings wait shortly for feedback and then pronounce User data In the USER DATA menu you can perform the functions described be low Delete user data In the USER DATA menu you can delete the pairing relationships After you delete the pairing relationship you cannot use an unpaired phone with the hands free phone system nor its phonebook until you cre ate a pairing relationship for it Always re member that this operation deletes all the pairing relationships To delete user data using manual in teraction proceed as follows Select DELETE USERS and then press SRC OK or NIMAIN The system will display the message DELETE ALL REGISTERED USERS To confirm press SRC OK or N MAIN 1 Or using voice interaction Press pronounce Settings wait shortly for feedback and then pronounce Delete users Th
84. key to delete the last num ber entered The system will ask you to confirm the deletion by pressing SRC OK or MAIN If you are using voice inter action press and say Delete Press the W key once to finish enter ing the house number displayed The sys tem will ask you to confirm by pressing SRC OK or MAIN If you are using voice interaction press and say OK Once you have entered the house num ber Blue amp Me Nav will display the full address and ask for confirmation in order to begin navigation If the address entered is ambiguous the system will prompt you to choose between the possible alterna tives Note While entering the house number both numbers and letters are shown on the fourth row see fig 4 of the reconfig urable multifunction display in the event of future map software updates these will allow you to set particular types of num bering that require the use of alphanu merical characters Points of interest This function gives you access to a file con taining information on the location of use ful destinations of general interest divided by category e g hotels restaurants chemists airports railway stations au thorised workshops etc To use this function your USB device with the preloaded map software must be con nected to the USB port on the car To select a Point of interest using aM manual interaction Activate the main Menu select the NAVIGATI
85. le phones will be added to this list Make Model Automatic Non automatic Managing phonebook download phonebook download message reading Samsung SGH i750 K750i movo Po o Z e Fo o o Soo T630 Sony erent Ericsson T637 YS This mobile phone is unable to support call waiting with the hands free kit installed on your car Additional mobile phones will be added to this list Note Certain mobile phones included in the above list could not support the transmission of linked messages SMS texts longer than 160 characters Refer to your mobile phone owner s manual 63 BLULUE amp ME nav BLUE amp ME nav 64 SUPPORTED USB MEMORY DEVICES USB memory devices The media player supports most of the USB memory devices 1 0 1 1 or 2 0 With Blue amp Me Nav media player the fol lowing USB devices are recommended Memorex Travel Driver 256 MB USB 2 0 C Memorex Travel Driver GB USB 2 0 SanDisk Cruzer Micro 256 MB USB 2 0 O SanDisk Cruzer Mini 256 MB GB USB 2 0 Lexar JumpDrive 2 0 512 MB O PNY Attach 256 MB USB 2 0 Sony Micro Vault Note It is advisable not to use USB devices equipped with the password function If the USB device is equipped with this func tion always ensure that the function is dis abled The media player supports just one media library When connecting a new USB de vice Blue amp Me Nav will build
86. mp Me Nav will tell you the current setting using voice synthe sis and will ask you if you wish to change it Answer Yes to change the option No to maintain the current setting We 45 BLUE amp ME nav BLUE amp ME nav 46 O Set motorways Use this setting to tell Blue amp Me Nav if you wish to give preference to motor ways when calculating the route A With manual interaction proceed as follows Select the SET MOTORWAYs option by pressing SRC OK or N MAIN Select YES or NO using the A or W keys and press SRC OK or N MAIN to confirm Or with voice interaction Press and say SET MOTOR WAYS Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the option No to maintain the current setting O Set ferries We Use this setting to tell Blue amp Me Nav whether you wish to include sections that involve the use of ferries With manual interaction proceed as amp follows Select the SET FERRIES option and then press SRC OK or N MAIN Select YES or NO using the A or W keys and press SRC OK or N MAIN to confirm Or with voice interaction Press and say Set ferries Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the option No to ma
87. nd To inter rupt an ongoing interaction and start a new interaction press at any time dur ing the interaction and issue a voice com mand To stop an ongoing interaction press PESC You will hear a tone indicating when voice recognition is deactivated The hands free kit help option can speak the list of commands available to you at any time depending on the keyword lev el that you are currently on To use the help system say Help Listen to the list of currently available commands and de cide on which command you d like to is sue to the system Valid means that the keyword pronounced is included in the Blue amp Me Nav dictionary and that can therefore be recognized by the system for the concerned level Adjust the volume of phone calls to a lev el that is comfortable and safe while the car is in motion To adjust the default vol ume of Blue amp Me Nav see paragraph EXTERNAL AUDIO VOL function in the sound system owner handbook To temporarily adjust the volume of the cur rent phone call press or or adjust the position of the radio knob After the phone call is disconnected the volume will revert back to the original level You can press or also to adjust the volume of the current Blue amp Me Nav voice announcement Please remember that to interrupt a voice announcement you can always press at any time during a voice interaction and give a new voice command Note O Instru
88. nds with this system To issue a voice command to the system press and wait for the tone indicating that voice recognition is active Then speak the command in your natural voice at a moderate pace When the system rec ognizes the command it will acknowledge your command by speaking a response or acting on your command Voice commands are organized according to three increasing levels level 2 lev el and 3 level When a valid level keyword is pro nounced the system will activate 2 lev el keywords when a valid 2 level key word is pronounced the system will ac tivate 3 level keywords If the user pronounces a valid level key word then the submenu relevant to that command will remain active until a key word leading to another level is given or the interaction is interrupted the same rule applies for the other lower levels 2 and 3 level gt For the list of available keywords re fer to section VOICE COMMANDS KEYWORDS SUMMARY To repeat the last system voice an nouncement press for longer than second or press shortly and pronounce Repeat The system can issue voice announce ments A voice announcement is a spoken message initiated by the system To can cel a voice announcement press ESC or press and pronounce Cancel A voice interaction is a two way commu nication spoken exchange between system and user To initiate a voice interaction press and issue a comma
89. ne zero three The system will repeat the complete phone number and display it If the number is complete pro nounce Dial If you have not fin ished speaking the phone number then pronounce the remaining dig its and then pronounce Dial The system will start the call to the displayed phone number To end the phone call press N MAIN for longer than second You can pronounce the sequence of phone number digits in digit groups which allows you to verify the recognized number in several small portions Digit groups are cre ated by the pauses you use while pronouncing the sequence of digits If you pause after pronouncing sev eral digits a digit group is created The system will repeat the recog nized digits If the spoken digits are correct you can continue pronouncing the phone number If the spoken digits are in correct you can delete the digit group by pronouncing Delete The system will delete the last group of numbers and display the partially dialled phone number Then you can re pronounce the digit group and al so the remaining phone number dig its To cancel the phone call pronounce Cancel To cancel the phone call and start dialling again pronounce Start over To ask the system to repeat the recognized phone number pro nounce Repeat If no phone number was dialled the system says No number available If the repeated phone number is
90. ng the previous options has a telephone number and your Bluetooth mobile phone is connected to Blue amp Me Nav the sys tem will allow you to decide whether to start navigating toward the chosen point of interest or make a phone call Select the required option by pressing SRC OK or N MAIN Or use voice interaction by press i ing and saying Navigation Once the system message has fin ished say New destination and then Points of interest Then say List e Blue amp Me Nav will provide you with a list of the available categories If you already know which of the categories stored on your USB device you require you may say it directly gt Refer to the NAVIGATION VOICE COMMANDS section for a list of avail able categories The system will ask you for confirmation say Yes or press SRC OK or N MAIN Otherwise say No Now Blue amp Me Nav will prompt you to choose between local points of in terest or elsewhere by means of voice synthesis O If you select local Blue amp Me Nav will display a list of points of in terest belonging to the category se lected previously e g restaurants sorted according to distance from your current location including distance and name Scroll through the list using the A or Y keys and press SRC OK or N MAIN to select the required point of interest O If you say elsewhere Blue amp Me Nav
91. ng the mobile phone pairing proce dure Blue amp Me Nav attempts to de tect a phone equipped with Bluetooth wireless technology within range and then establishes the connection using a Per sonal Identification Number PIN Once your phone is paired you have the option to transfer your mobile phone con tacts to the hands free kit to make a phone call either by using the contacts list or directly pronouncing the phone num ber to answer a call and also to answer another incoming phone call To interact with Blue amp Me Nav you can use either buttons on the steering wheel and voice commands With voice recognition you can perform system func tion by speaking voice commands also identified as keywords When the sys tem recognizes a keyword it will respond with the appropriate action Voice recog nition is an easy and convenient way to use Blue amp Me Nav All the system functions are available with in the Blue amp Me Nav Main Menu When the car is not moving you can surf through the menu using either buttons on the steering wheel and voice commands When you are travelling you can inter act with Blue amp Me Nav using buttons on the steering wheel or voice commands relevant only to phone functions LAST CALLS and PHONEBOOK and me dia player To activate settings when trav elling you can only use voice commands The hands free kit enables the following operations O Contact calling by voice
92. ninn inini 97 PERSONAL DATA PROTECTION nssssssssesssssssrsssserssesrssee 99 SYSTEM SOFTWARE USE NOTICE sssrssusoriisisn 100 Hands free kit with Bluetooth wireless technology message reader media player and navigation system OVERVIEW Fiat Blue amp Me Nav based on Windows Mobile is a personal telematic system that allows the use of communication enter tainment and navigation applications specif ically designed for in car use The Blue amp Me Nav system installed on your car offers handsfree text message read er multimedia player and navigation system functions and is ready for the addition of fur ther services due to become available in the future The Blue amp Me Nav system fully inte gral with voice commands buttons on the steering wheel and multifunction display messages gives you the possibility of in teracting with your Bluetooth wireless technology mobile phone even if you keep it in your pocket or bag without hav ing to take your eyes off the road or re moving your hands from the steering wheel To use voice commands you are not required to train the voice recognition system to recognize your voice This im plies that the system is nearly equally per forming with different persons i e the voice recognition system is of the speak er independent type With this system you can also play your favourite music stored on USB device and select tracks and playback modes with both vo
93. nload via your mobile phone Therefore it is not necessary to contact Fiat Dealership for updating To get updated information about Blue amp Me Nav consult the dedicated site at www fiat com IMPORTANT Blue amp Me Nav system updating may not be available yet Consult the dedicated site at www fiat com to ob tain additional info about this function and its activation procedure Notes O To download and manage updatings on Blue amp Me Nav make sure that a GPRS Data Plan is active on your phone number Otherwise request it to your mobile phone carrier O Your mobile phone shall be enabled for data phone communication Enabling can be implemented by your mobile phone carrier or you can refer to section con cerning the Equipment for General Pack et Radio System GPRS on your mobile phone manual O To download and manage updatings on Blue amp Me Nay your mobile phone shall be paired to the system Updating Blue amp Me Nav To download and to set updatings use the SYSTEM UPDATE menu To start updating using manual in t teraction proceed as follows Press MAIN and move to SET TINGS SYSTEM UPDATE Then Press SRC OK or MAIN Blue amp Me Nav will display the message SYSTEM UPDATE and start the updating procedure If no update is available Blue amp Me Nav will display the message NO UPDATE AVAILABLE and say No update available Otherwise Blue amp Me Nav will complete the
94. ntcsesssesecsacsevssseiesesesssnsontasese Managing phone Calls 0 sssssssssssssssseecsssecssssecessnsesssnesesnseeees Conference call fUNCtION seanunenermeoaraireioaraanei MESSAGE READER FUNCTIONS ssssssssessssoressssessssessse Managing messages Deleting all messages Signal tYPeSr scccssssscbasacessssascevsescoicastossasts seta MEDIA PLAYER FUNCTIONS ns sssessssssssosssressssrossrsrosseressse How to connect the USB device to Blue amp Me Nav How to manage the media library 0 eeseessessseesssees Selection by folder ssc Selection by artist Selection by genre Selection by album Selection by playlist Playing audio tracks sssini Shuffle playback of the whole media library as Now playing track data ssssssissssesssrossssssssosvossssossasosssossoessavose SAUGIO Play cacesssscessascestascsanssebosscassssasiessessoacaservasanisteanseusisteasisieds Pause Previous track sses Changing audio source seas Practical hints for using the media player SSF MMS EA E N O Organizing Media files oe sseesssssessssseesessescesseessnseecssseeenee 35 Building the media library on Blue amp Me Nav 35 Building playlists for Blue amp Me Nav on 35 FUNCTIONS OF THE NAVIGATION SYSTEM 36 Navigation display 36 Voice messages 36 SEAMEIMAVISACION ssscbssessconcssccasecconssscnssasesveccarnsis
95. nteraction proceed as follows Press MAIN to open the Main Menu Select PHONEBOOK and then press SRC OK or MAIN Press or W to select the alpha betical grouping which your con tacts name belongs to press SRC OK or MAIN and then se lect the required contact If the contact has just one phone number press SRC OK or MAIN to start the call If the contact has multiple phone numbers press SRC OK or N MAIN to view the different phone numbers and then select the required one by A or and press SRC OK or MAIN to start the call To end the phone call press N MAIN for longer than second 21 BLUE amp ME nav BLUE amp ME nav 22 We Or using voice interaction Assume you would like to call the contact John in your mobile phone phonebook Press and pronounce Call John or Call John on at Mobile in the previous statement the key word Mobile represents the type of phone number you would like to call The phone number type can ei ther be at Home at Work or on at Other If the name is recognized the sys tem will display the recognized con tact s information John in the ex ample on the display screen If John has just one phone number the system will ask if you would like to call John To start the call say Yes otherwise say No If John has several phone numbers the system will ask which phone n
96. ocedure following the instructions specific to your mobile phone and press MAIN when you have finished Practical hints To improve both the voice recognition of your phonebook entries and Blue amp Me Nav pronunciation accuracy when re peating the entries please try to enter contact entries and memorize them us ing the following criteria O Avoid abbreviations O Write foreign names according to the way in which they are pronounced ac cording to the rules of the Blue amp Me Nav language set on your car For example enter Tanja as Tanya to improve recognition accu racy and also to obtain the correct pro nunciation by the system O When adding or editing contact entries insert the appropriate accent marks when the name requires these marks to be properly pronounced and recog nized by the system For example en ter Nicolo Rebora as Nicol R bo ra to obtain the correct pronunciation O When adding or editing contact entries bear in mind that certain isolated block letter may be read as Roman numer als e g V may be read as fifth O When calling contacts by voice do not include the middle names or middle ini tials of your contacts Notes O You are only required to pair your mo bile phone a single time O You can pair up to five mobile phones to be used one at a time O On your paired mobile phone the Bluetooth setting must be turned on in order to connect
97. oice interaction 2 Press pronounce Settings wait shortly for feedback and then pronounce Download phone book Add contacts If your mobile phone does not support au tomatic downloading during phone pair ing the USER DATA item will be avail able in the ADD CONTACTS menu A To copy contacts from your mobile phone to the hands free phone sys tem using manual interaction pro ceed as follows Select ADD CONTACTS and then press SRC OK or N MAIN Or using voice interaction We Then follow the instructions given on your mobile phone owner s manual for trans ferring contacts Press pronounce Settings wait shortly for feedback and then pronounce Add Contacts Reset user data p We To reset all user data and phone books contacts for paired phones to the default values using manual in teraction proceed as follows Select DELETE ALL and then press SRC OK or N MAIN The system will display the question DELETE ALL DATA SAVED IN THE SYSTEM To confirm press SRC OK or N MAIN Or using voice interaction Press pronounce Settings wait shortly for feedback and then pronounce Reset all The system will ask Delete all da ta saved by users from the sys tem To confirm pronounce Yes 53 BLULUE amp ME nav nav BLUE amp ME 54 MANAGING UPDATES Blue amp Me Nav can be updated with new functions that you can dow
98. oice interaction Press and say Navigation Once you have heard the system message say WEHICLE POSI TION Blue amp Me Nav will dis play the required information We Route simulation Blue amp Me Nav uses this function to display a simulation of the calculated route Note To carry out a simulation navigation to wards a destination must be in progress A destination must therefore have been set and the route must have been suc cessfully calculated 47 BLUE amp ME Mav BLUE amp ME nav 48 UN WAV IN Tet For road safety reasons it is only possible to enter a new destination with the car at a stand still For road safety reasons it is only possi ble to alter the navigation settings with the car at a standstill To simulate the active route by t means ofmanual interaction Activate the main Menu select the NAVIGATION option and then press SRC OK or N MAIN Select the ROUTE SIMULATION option and press SRC OK or MAIN to start the simulation To stop the simulation simply press the NAV key on the keypad near the courtesy light Or with voice interaction i Press and say Navigation Once you have heard the system message say route simulation Blue amp Me Nav will start the sim ulation To stop the simulation press and say Navigation SETTINGS FUNCTIONS The SETTINGS menu enables you to perform the following functions O Pairin
99. onounce Settings and then Connection code Blue amp Me Nav will prompt The current GPRS connection code is value To change code say a number from to 9 or say Default To dis able the connection code say Dis able To change the code say a number from to 9 or say De fault To disable the connection code say Disable In previous text value is the GPRS connection code set at that moment After setting the new connection code Blue amp Me Nav will say The Connection Code is set to val ue here value corresponds to the new GPRS code set MEDIA PLAYER SETTINGS Autoplay When the Autoplay option is on Blue amp Me Nav will start to play the au dio files on your USB device as soon as you turn the ignition key MAR Once you ac tivate this option the first time you use the player playback will start automatically The Autoplay option shall be disabled when required before connecting your USB device to the USB port and building or updating the media library A To change Autoplay setting us amp ing manual interaction proceed as follows Open the Main Menu select SET TINGS MEDIA PLAYER AU TOPLAY and then press SRC OK or MAIN To activate Autoplay select AU TOPLAY ON and press SRC OK or NIMAIN To deactivate Auto play select AUTOPLAY OFF and press SRC OK or MAIN 1 Or using voice interaction Press and pronounce Autoplay on o
100. onounce words clearly in your nat ural voice at a moderate pace without stops O If possible try to minimize background noise in the car O Ask the other passengers to keep silent while you are pronouncing voice com mands to prevent misunderstanding since the system could recognize oth er words in addition to or different from your voice command if several people are speaking O If your car has a convertible top close it before using voice recognition Notes As concerns countries where the version in native language is not available voice recognition of the different commands and phonebook contacts could be difficult You are therefore recommended to adopt a pronunciation accent meeting the lan guage present on Blue amp Me Nav To change the voice recognition language contact Fiat Dealership or consult the ded icated site at www fiat com DISPLAY The different Blue amp Me Nav Main Menu options are displayed on the in strument panel multifunction display see fig 1 The display shows the following informa tion Status information for the Bluetooth wireless technology enabled mobile phone MATH HEHN F0Q3256g fig 2 O indicates that Blue amp Me Nav is currently connected with a Blue tooth wireless technology enabled mobile phone O The absence of symbol indicates that connection is disconnected C Symbol 1 indicates that current call is the first in
101. or each mo bile phone O The phone conversation is transferred to the system Transferring a phone conversation from the hands free phone to your mobile phone To transfer a phone conversation from the hands free phone to your mobile phone press SRC OK You can talk on your mobile phone and still use buttons on the steering wheel Specifically you can press MAIN to switch between two phone calls on your mobile phone or press MAIN for longer than second to end the phone conversation Putting a phone call on hold To put a phone call on hold and disable the microphone so that you can talk with out being listened to by the caller press CONFERENCE CALL FUNCTION only with Bluetooth phones supporting this function With the Conference Call function you can call another contact while you are en gaged in a phone conversation yet In this way you can speak with both contacts at the same time To start a Conference call while you are still engaged in a phone conversation call the second required contact as described in section MAKING A PHONE CALL When Conference Call option is active the display will show CONFERENCE To end both calls press button MAIN for long 25 BLULUE amp ME nav BLUE amp ME nav 26 MESSAGE READER FUNCTIONS If your mobile phone with Bluetooth wireless technology supports the message reader function at the arrival of a new SMS text Blue amp Me Na
102. our media library friendly 29 BLUE amp ME nav BLUE amp ME nav 30 Note Not all formats require to enter media in fo Formats mp3 and wma recognized by Blue amp Me Nav require media info whereas wav not If no media info is en tered audio files can only be selected by folder For further details refer to section PRAC TICAL HINTS FOR USING THE MEDIA PLAYER Selection by folder Track folders on your USB device are dis played in the FOLDERS menu To select tracks through manual in teraction proceed as follows Launch the Main Menu and select MEDIA PLAYER then press SRC OK or MAIN Select FOLDERS then press SRC OK or MAIN Scroll folders To play all folders se lect PLAY ALL and then press SRC OK or MAIN To display folder tracks press SRC OK or MAIN Scroll the selected folder tracks To play the required track select the title and then press SRC OK or NMAIN 1 Or using voice interaction Press and pronounce Folders Scroll folders To play all folder se lect PLAY ALL and then press SRC OK or MAIN To display folder tracks press SRC OK or NMAIN Scroll the selected folder tracks To play the required track select the ti tle and then press SRC OK or NMAIN For further details on FOLDERS menu customization see section PRACTICAL HINTS FOR USING THE MEDIA PLAYER Selection by artist To select the tracks of a special t art
103. overnments TRADEMARKS This EULA does not grant you any rights in connection with any trademarks or service marks of Fiat Auto S p A Fiat Auto S p A s Software Suppliers their affiliates or suppliers PRODUCT SUPPORT Product support for the SOFTWARE is not provided by Fiat Auto S p A s Software Suppliers or their affiliates or subsidiaries For product support please refer to Fiat Auto S p A support number provided in the documenta tion for the DEVICE Should you have any questions concerning this EULA or if you desire to contact Fiat Auto S p A for any other reason please refer to the address provided in the documentation for the DEVICE No Liability for Certain Damages EXCEPT AS PROHIBITED BY LAW FIAT AUTO S p A S SOFTWARE SUPPLIERS AND THEIR AFFILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT SPECIAL CONSEQUENTIAL OR INCIDENTAL DAM AGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE THIS LIMITA TION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE IN NO EVENT SHALL FIAT AUTO S p A S SOFTWARE SUPPLIERS AND OR THEIR AFFILIATES BE LIABLE FOR ANY AMOUNT IN EXCESS OF U S TWO HUNDRED FIFTY DOLLARS U S 250 00 FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTIC ULAR JURISDICTION PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACK AGE OR PROVIDED WITH THE SOFTWARE PRINTED MATERIALS BLUE amp ME 103 nav Fiat Auto S p
104. query for de vices equipped with Bluetooth wire less technology the setting on your mobile phone might be called Discover or New Device In this list you will find Blue amp Me name identifying the Blue amp Me Nav system on your car select it O When prompted by the mobile phone enter the PIN number shown on the in strument panel display using your mo bile phone keypad If pairing is success ful the system will say Connecting and at the end the display will show as confirmation message the ID of the paired mobile phone It is essential to wait until you see this con firmation message on the display Pressing N MAIN or JESC before the message is displayed may cancel the pairing process If the pairing process fails an error mes sage will be displayed in this event repeat the pairing procedure O At first pairing Blue amp Me Nav will say Welcome immediately after connect ing This message will no longer be heard at next pairing procedures O Blue amp Me Nav will ask if you would like to copy your paired phone phone book to Blue amp Me Nav It is rec ommended to copy it To start copying the phonebook say Yes otherwise say No O For certain mobile phones the phone book is not copied automatically in this case you must transfer the phonebook contacts using your mobile phone key pad If Blue amp Me Nav asks you to do this then perform this procedure following th
105. r Autoplay off Note If you change the Autoplay settings after connecting the USB device new setting will be activated the next time you con nect a different USB device or the same USB device with updated track library Shuffle Use the Shuffle option to change the playback sequence With Shuffle option on Blue amp Me Nav will play digital au dio files at random To change Shuffle setting using O manual interaction proceed as fol lows Open the Main Menu select SET TINGS MEDIA PLAYER SHUFFLE and then press SRC OK or MAIN To activate the Shuffle option se lect SHUFFLE ON and press SRC OK or N MAIN To deacti vate it select SHUFFLE OFF and press SRC OK or MAIN 1 Or using voice interaction l Press and pronounce Shuffle on or Shuffle off Loop Use the Loop option to repeat a track To activate the Loop option using manual interaction proceed as fol lows Open the Main Menu select SET TINGS MEDIA PLAYER LOOP and then press SRC OK or N MAIN To activate the Loop option select LOOP ON and press SRC OK or N MAIN To deactivate it select LOOP OFF and press SRC OK or MAIN 59 BLUE amp ME nav nav BLUE amp ME gt Or using voice interaction u Press and pronounce Loop on or Loop off Note With Loop option on previous and next track playback will pass to the previous or next audio track that will start to be r
106. received Blue amp Me Nav enables to O read it O call directly the sender O delete it To do this when reading the message open the Blue amp Me Nav Main menu and then press buttons SRC OK or MAIN to select the required option gt Or using voice interaction I Press and pronounce Read or Call or Delete the system will select the required option 27 BLUE amp ME nav BLUE amp ME nav 28 DELETING ALL MESSAGES Blue amp Me Nav can store max 20 mes sages a new incoming message will delete the oldest one received from the inbox All messages stored by Blue amp Me Nav can be deleted by one single command To delete all messages open the Blue amp Me Nav Main menu and select DELETE ALL then press SRC OK or MAIN the system will ask DELETE ALL MES SAGES FROM VEHICLE press SRC OK or N MAIN to delete all messages otherwise press WESC gt Or using voice interaction t Press and pronounce Message reader After the acoustic signal say Delete all Blue amp Me Nav will ask Delete all messages from the vehicle now say Yes to delete all messages oth erwise say No SIGNAL TYPES With the Blue amp Me Nav message reader it is possible to set three notifica tion signals for the arrival of a new SMS text O VIS tACOUST Blue amp Me Nav will warn you of a new incoming message through a visu al
107. revious e Delete messages e Back Delete texts 2 Backwards e Delete The one before To open the MESSAGE READER To read previous message To delete all the messages contained in the inbox the system Reader off To switch the message reader off will ask for confirmation before deleting y Switch off reader new incoming message will not be the messages Switch reader off signalled and will not be Deactivate reader transmitted to the system Visual and acoustic The arrival of a new message Signal type signal i will be both indicated through a L Signal m Visual and acoustic visual signal on the instrument Type of signal Acoustic panel display and through an acoustic signal the system will sound a beep Visual plus acoustic To set the Signal type e Visual signal only L Visual e Visual only The arrival of a new message will only be indicated through a visual signal on the instrument panel display BLUE amp ME nav BLUE amp ME 70 MEDIA PLAYER VOICE COMMANDS e Media player e Media e Music e Play e Play music e Play media e Stop e Stop music e Stop media e Next e Next track e Next song The one after e Previous e Previous track Previous song The one before Shuffle on Random order on Shuffle off Random order off Loop on e Loop track on Cycle on Enters the MEDIA PLAYER menu Activates
108. route e Set motorways e Motorways Include or exclude motorways from the route calculation e Set ferries Ferries Boats Include or exclude ferries from the route calculation e Set tolls Tolls Toll e Navigate Start navigating towards the displayed destination e Forward Next Display the next destination in the list Back Le Previous Display the previous desti nation in the list Delete Delete the displayed destination Delete all Delete all the destinations in the list Include or exclude toll roads from the route calculation e Dictate destination e Dictate e Dictate destination Enable or disable completion of the destination by voice Lo a areal e Picnic area Train Station e Train station e Trains e Vehicle service e Vehicle service Petrol station e Service stations Petrol station Petrol stations Chemist Chemists Restaurant Restaurants Hotel Select the Picnic Area category Select the Train Station category Select the Vehicle Service category Select the Service Station category Select the Chemist category Select the Restaurant category Select the Hotel category SETTINGS FUNCTION VOICE COMMANDS e Setup Setup menu e Settings Enters the SETTINGS menu e Media settings Enters the MEDIA PLAYER menu Shuffle Random order
109. s navigation function by means of voice synthesis and pictograms that appear ona reconfigurable multifunction display on the control panel The navigation system al lows you to navigate towards a destina tion address to call up programmed des tinations or points of interest e g hotels restaurants chemists airports railway sta tions authorised workshops etc The car s position is determined by the GPS Global Position System by processing signals from GPS satellites and the car s odometric signals Blue amp Me Nav us es digital mapping data preloaded onto your USB device to lead you to your de sired destination by the best possible route from your current location UN WARNING The instructions provided by Blue amp Me Nav do not ex onerate the driver from full responsi bility for any manoeuvres carried out in traffic while driving the car and for respecting the highway code and oth er road traffic regulations Responsi bility for road safety always lies with the driver of the car under all circum stances Notes O GPS reception is difficult under trees among tall buildings in covered car parks in tunnels and in any place where the satellite aerial reception may be hin dered O The Blue amp Me Nav navigator takes a few minutes to determine the car s new position if the car is moved with the system turned off e g after trans porting the car on a ferry O If the vehicle battery is dis
110. s which countries are pre loaded on your USB device If the maps for only one country are pre sent this will be set as the destina tion country Use the A or W keys to select the required country and press SRC OK or N MAIN to confirm Using voice interaction say the re i quired country Blue amp Me Nav will ask you to confirm the select ed country by means of a voice message Notes O In order to select the country the USB device containing the maps must be in serted in the USB port on the car O If several countries are loaded on your USB device Blue amp Me Nav will show a list of countries in alphabetical order on the multifunction display If the system is able to detect the GPS po sition of the car the country where you are located will be shown at the head of the list After selecting the country Blue amp Me Nav will ask you to enter the destination town city by means of the steering wheel control and voice interaction Procedure for entering destination TOWNICITY The area of the control panel multifunc tion display you use to enter the town city name is made up as follows F0Q3270g A Blue amp Me Nav uses the first row to tell you that you are currently in town city input mode B The second row displays the char acters already entered into Blue amp Me Nav which are used to make up the des tination town city name C The third row
111. signal on the instrument panel dis play and through an acoustic signal Blue amp Me Nav will also ask if you would like to read the message O VIS SIGNAL Blue amp Me Nav will warn you of a new incoming message through a visu al signal on the instrument panel dis play The message received can also be read later see paragraphs How to read the last SMS text received and In box O READER OFF Blue amp Me Nav deactivates the Message reader a new incoming message will not be signalled and will not be transmitted to the system Open the Blue amp Me Nav Main amp menu select the option MESSAGE READER and then press SRC OK or MAIN Select the option SIGNAL TYPE and scroll the three available options using buttons A or V select the required option and then press SRC OK or N MAIN Or using voice interaction We Press and pronounce Message reader after the acoustic signal say Signal type Blue amp Me Nav will list the avail able options and then you can select the required one by pronouncing Reader off or Visual and acoustic signal or Visual signal only MEDIA PLAYER FUNCTIONS The MEDIA PLAYER menu enables the following O to display tracks stored on your USB device O to play audio files stored on your USB device Note Before starting to use your media player read section SUPPORTED USB MEMO RY DEVICES to make sure your USB memory device
112. splayed genre press SRC OK or N MAIN Or using voice interaction We Press and pronounce Genres Scroll genres To play all the tracks of the displayed genre press SRC OK or N MAIN Note If your USB device contains many audio files the GENRES menu can be subdivid ed into alphabetical sub menus Alphabet ical sub menu can display just the first let ter of the tracks it contains e g A F or it can display the first two letters e g Aa Ar 31 BLUE amp ME nav BLUE amp ME nav 32 Selection by album To select an album using manual in teraction proceed as follows Launch the Main Menu select ME DIA PLAYER and then press SRC OK or N MAIN Select ALBUMS and then press SRC OK or N MAIN Scroll albums To select the dis played album press SRC OK or NMAIN Scroll the album tracks To play all the tracks in the album select PLAY ALL and press SRC OK or NMAIN To play an album select it and then press SRC OK or NMAIN To play just one track select the track title and press SRC OK or NMAIN 1 Or using voice interaction Press and pronounce Albums Scroll albums To select the dis played album press SRC OK or N MAIN Scroll the album tracks To play all the tracks in the album select PLAY ALL and press SRC OK or N MAIN To play just one track select the track title and press SRC OK or N MAIN Note If your USB device contains many aud
113. st the town city where you are currently lo cated as the destination town city O If the town city name is made up of sev eral words you only need to enter one of the words making up the town city name O If the name of the town city displayed in the second row see fig 4 is the full name of the required town city you can stop entering characters and select the town city from the list by pressing Y once The message OK will appear on the third row of the display Press SRC OK or N MAIN to confirm If using voice interaction press and say gt If you wish to disable voice input of the town city refer to the NAVIGATION SETTINGS DICTATE DESTINATION section Once you have selected the town city Blue amp Me Nav will ask you to enter the name of the Road Street or to navi gate toward the city centre using the fol lowing menu O ENTER ROAD O CITY CENTRE Q Using manual interaction Select the wc option using the A or W keys and press SRC OK or MAIN to confirm Or with voice interaction Road or City centre say If you choose City centre the system will display the full address and ask you to confirm in order to begin navigation If you select Enter road instead you must enter the destination road street in the same way as when you entered the town city Notes O When entering the name of the road omit the type of road street road street
114. sy light MEHL Siw a Blue amp Me Nav direct De GD C CD fig The red led comes on when no connection is available for Roadside Assistance and Infomobility services Controls Button Short press function Long press function less than second more than I second N MAIN Launch Blue amp Me Nav Main Menu Reject an incoming Confirm selected menu option phone call Accept an incoming phone call End a phone call Switch between two ongoing phone conversations hang up call waiting Select text message displayed ESC Cancel voice recognition Cancel a voice announcement STEERING Interrupt message reading WHEEL Exit Blue amp Me Nav Main Menu Exit the sub menu and return to the previous menu option Exit current menu option without storing settings Turn the microphone on off during a phone conversation Mute the ring tone of an incoming call Media player Pause on off Activate voice recognition Repeat the last Interrupt voice announcement to provide a new voice command utterance in a voice interaction Notes O For many tasks the steering wheel buttons SRC OK and MAIN can be used interchangeably and you can use the key that is more conve nient for you to press O
115. t 1 With voice interaction press and i say Navigation and then once you have heard the system message say Arrival information Blue amp Me Nav will display the estimated time of arrival and the es timated distance remaining to the destination Note If the trip duration exceeds 10 hours an indication of the remaining trip time will be given instead of the estimated time of arrival Stop navigation If the car is actively navigating towards a destination Blue amp Me Nav will allow you to suspend the current navigation You can however resume the interrupt ed navigation at any time you want gt See RESUME NAVIGATION para graph To suspend navigation with manu Mal interaction Activate the main Menu select the NAVIGATION option and then press SRC OK or MAIN Select the STOP NAVIGATION option by pressing SRC OK or N MAIN Blue amp Me Nav will ask you to confirm the operation press SRC OK or N MAIN to confirm or PESC to continue the set navigation a With voice interaction i press and say Navigation and then once you have heard the sys tem message say Stop naviga tion The system will ask you to say Yes to stop navigation or No to continue the set navigation Recent destinations Use the RECENT DESTINATIONS function to call up one of the last 20 des tinations stored by Blue amp Me Nav in a dedicated list When in the main menu
116. t on the car Navigation settings The NAVIGATION SETTINGS menu allows you to establish navigation options e g by indicating whether you want Blue amp Me Nav to calculate the fastest or shortest route or whether motorways or ferries should be included in the route calculation This menu may also be used to set your preference for voice completion of the destination by means of the DICTATE DESTINATION option A WARNING For road safety reasons it is only possible to enter a new destination with the car at a stand still In order to access the navigation set tings using manual interaction pro ceed in the following way Activate the main Menu select the NAVIGATION option and then press SRC OK or MAIN Select the NAVIGATON SET TINGS menu and press SRC OK or NIMAIN to confirm Or with voice interaction i Press and say Navigation Once you have heard the system message say Navigation set tings Blue amp Me Nav will dis play a list of the available options The available options are O Type of Route Use this option to tell Blue amp Me Nav whether you want the calculated route to be FASTER or SHORTER Using manual interaction proceed as follows Select the TYPE OF ROUTE op tion and then press SRC OK or N MAIN F ne re uired option using the keys and press R or MAIN to confirm Or with voice interaction Press and say Type of route Blue a
117. t the Bluetooth wireless technology connection on your mobile phone is enabled Blue amp Me or ID O Make sure that the mobile phone you paired with the system is within range O Reset Blue amp Me Nav by turning the mobile phone off and on O Reset Blue amp Me Nav by turning the ignition key to STOP and then to MAR again O Verify the correct PIN number and try entering it again O Reset the mobile phone by turning it off and on and then retry the pairing procedure gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE Problem Probable Cause Possible Solution Display screen shows PAIRING FAILED After three minutes each attempt to Retry the pairing procedure During the enter the PIN number fails since PIN entering step verify that the PIN pairing timed out number you are entering on the mobile phone is the same number that is shown on the instrument panel display gt SETTING FUNCTIONS Or the system says Bluetooth pairing timed out Please try again later PAIRING YOUR MOBILE PHONE Display screen shows O The caller is not recognized as a Enter a contact in your mobile INCOMING CALL PRIVATE name stored in the phonebook phonebook for the incoming call NUMBER and the paired mobile phone does and then download your phonebook not have a called ID feature contact again O The caller has blocked caller ID to prevent the system from displaying the caller s name and or phone number In
118. the instrument panel display This mobile phone requires a specific setting for transferring automatically the audio output to an external Bluetooth wireless technology device This is the max number of calls that can be stored To prevent this problem after turning the mobile phone on wait for 30 seconds at least before connecting it to the hands free kit Model Sony Ericsson T637 MESSAGE READER Problem receive SMS messages on the cellular telephone but not on Blue amp Me Nav SMS texts received from your phone carrier service center show abnormal displaying of sender s name or number Blue amp Me Nav stopped receiving messages from your cellular telephone You cannot display some SMS messages present on your cellular telephone on Blue amp Me Nav SMS message list Probable Cause Not all cellular telephones support SMS messages transfer to Blue amp Me Nav Not all mobile phones support correct transfer of the phone carrier s name sending the SMS text to Blue amp Me Nav You might have set by mistake the option NOT ACTIVE from menu notification settings Blue amp Me Nav is capable to read and store last 20 received SMS messages while the telephone set is connected to the system Messages received in other contexts are not transferred to Blue amp Me Nav Possible Solution Check that your cellular telephone supports the function for transmitting SMS Messages
119. the phonebook on your mobile phone then download the phonebook again gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For push phones O Download the phonebook again and make sure to send valid contacts to the system using your mobile phone when prompted O Use the option ADD CONTACTS in the SETTINGS menu to send contacts from your mobile phone to the system gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK 77 BLUE amp ME nav BLUE amp ME nav 78 Problem Display screen shows NO PHONE CONNECTED Or the system says There s no bluetooth phone connected Display screen shows PHONE DISCONNECTED Display screen shows PAIRING FAILED Or the system says Pairing failed Please try again Probable Cause O The paired mobile phone is turned off O The paired mobile phone is not within range of the system the mobile phone should be located within approximately 10 m of the system O Bluetooth wireless technology connection has been disabled on your mobile phone Blue amp Me ID OA technical error occurred with the mobile phone Bluetooth wireless technology capabilities O During an ongoing phone conversation the mobile phone was taken out of the system range O A technical error occurred during the pairing procedure Possible Solution O Turn the paired mobile phone on O Make sure that your phone is paired O Make sure tha
120. this case nothing can be done and the message will always appear Display screen shows FUNCTION Even occasional short viewings of the Stop your car and attempt to perform ENABLED ONLY WHEN VEHICLE car display may be hazardous if your the function again manually STATIONARY attention has been diverted away from or continue driving and perform the your driving tasks Certain Blue amp Me function using the voice recognition Nav functions which require the user system to give attention to the car display are only available when the car is stopped Or the system says This function is only available when the vehicle is stationary nav BLUE amp ME BLUE amp ME nav Problem Probable Cause Possible Solution The system did not respond to voice command or key press O If you do not speak soon enough after pressing the system will interrupt voice interaction O If you are speaking too far from the in car microphone for example if you are sitting in the back seat the system may not hear your voice command O If you don t wait for the tone after pressing the system will get only a portion of the keyword and will misrecognize it O If you don t press before pronouncing a voice command the system will not activate voice recognition and therefore recognize your voice commands GC If you don t press N MAIN to enter the Main Menu it will not be possible to access manually the Blue amp Me
121. tion and then once you have heard the sys tem message say Resume navi gation The system will ask you to say Yes to resume navigation or No to cancel the above opera tion Note We If you turn your car s ignition key to STOP during a navigation session Blue amp Me Nav will automatically sus pend navigation When you turn your car s ignition key to MAR the system will ask you if you wish to resume navigation and show the preset destination address on the reconfigurable multifunction display With manual interaction press SRC OK or MAIN to resume navigation or JESC in order not to activate With voice interaction say Yes i to resume navigation or No in or der not to activate Arrival information Blue amp Me Nav is able to provide you with an estimated time of arrival at your destination and distance to the destination With manual interaction Activate the main Menu select the NAVIGATION option and then press SRC OK or MAIN Select the ARRIVAL INFORMA TION option by pressing SRC OK or MAIN Blue amp Me Nav will display an es timated time of arrival and estimat ed distance remaining to the desti nation Note When the car is moving the arrival infor mation may be displayed immediate ly by pressing the NAV key on the key pad near the courtesy light see fig I 43 BLUE amp ME nav BLUE amp ME nav 44 g
122. tions offered by the Blue amp Me Nav device involve the processing of personal data To protect unauthorised access to this information the device has been constructed to ensure that O Personal data linked to the handsfree functions phonebook recent calls and text message inbox are accessible only following automatic recognition of the user s mobile phone by means of Bluetooth technology O Personal data on the device phonebook recent calls text message inbox and recent destinations may be deleted using specific Blue amp Me Nav functions gt For further information on the deletion of personal data phonebook recent calls and text message inbox refer to the section SETTING FUNCTIONS USER DATA gt For further information on deleting recent destinations refer to the section NAVIGATION FUNCTIONS RECENT DESTI NATIONS IMPORTANT When leaving your car in a service centre remember that the personal data stored on the Blue amp Me Nav phonebook and recent cars text message inbox and recent destinations may be recorded or subject to improper use Before leaving your car in a service centre you will be able to delete registered user data and phonebook data stored in the Blue amp Me Nav gt For further information on the deletion of user data phonebook and text message inbox refer to the section SETTING FUNC TIONS USER DATA gt For further information on deleting recent destinations refer to th
123. ts the media and print ed materials any upgrades this EULA and if applicable the Certificate s of Authenticity and the recipient agrees to the terms of this EULA If the SOFTWARE is an upgrade any transfer must include all prior versions of the SOFTWARE Termination Without prejudice to any other rights Fiat Auto S p A or Fiat Auto S p A s Software Suppliers may terminate this EULA if you fail to comply with the terms and conditions of this EULA In such event you must destroy all copies of the SOFT WARE and all of its component parts Consent to Use of Data You agree that Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent may collect and use technical information gathered in any manner as part of product support services related to the SOFTWARE Fi at Auto S p A s Software Suppliers their affiliates and or their designated agent may use this information solely to improve their products or to provide customized services or technologies to you Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent may disclose this information to others but not in a form that personally identifies you Internet Based Services Components The SOFTWARE may contain components that enable and facilitate the use of cer tain Internet based services You acknowledge and agree that Fiat Auto S p A s Software Suppliers their affiliates and or their des ignated agent may a
124. u to operate the system without removing your hands from the wheel Prolonged Views of Screen do not access any function requiring a prolonged view of the screen while you are driving Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time Volume Setting do not raise the volume excessively Keep the volume at a level where you can still hear outside traffic and emergency sig nals while driving Driving while unable to hear these sounds could cause an accident Use of Speech Recognition Functions speech recognition software is inherently a statistical process which is subject to errors It is your responsibility to monitor any speech recognition functions included in the system and address any errors Distraction Hazard any features may require manual non verbal setup Attempting to perform such set up or insert data while driving can seriously distract your attention and could cause an accident or other serious consequences Stop the vehicle in a safe and legal manner before attempting these operations BLUE amp ME nav nav BLUE amp ME DISPLAY AND BUTTONS ON THE STEERING WHEEL _ ed indicator led for Roadside Assistance and Infomobility services MATH function keys near the front courte
125. umber you would like to call e g Call John at Work or at Home Answer with the type of required phone number e g at Home If John has several phone numbers but the location i e the type of phone number like work home etc is missing the system will dis play the selected contact and a list of related phone numbers To call the displayed phone number pronounce Call If the contact is correct but the phone number is wrong you can surf the phone number list manual ly by pressing or W When you find the required number press N MAIN or SRC OK to start the call To end the phone call press N MAIN for longer than second Practical hint When you call a contact with multiple phone numbers use the at location por tion of the voice command e g at Home at Work on at Mo bile This will shorten the amount of steps required to make the phone call Dialling a phone number using voice commands gt To dial a phone number using voice interaction proceed as follows Press and pronounce Dial The system will respond with Number please Pronounce the phone number as a sequence of single digits e g 0 ia lar r pra A 5 6 Th 8 OP plus H pound or 66399 star For example 0113290103 has to be pronounced as zero one one three two nine zero o
126. updating procedure We In certain cases Blue amp Me Nav could display the following message Update temporarily suspend ed System update will continue the next time you start the ve hicle In other cases during the up dating procedure the system may prompt to turn the ignition key to STOP and then to MAR When updating is over and available Blue amp Me Nav will display the message UPDATE COMPLETE and say Update completed Or using voice interaction Check for proper pairing between your mobile phone and Blue amp Me Nav and proper con figuration for data transmission Press and pronounce Settings Update Blue amp Me Nav will show the message UPDATE will say Up date and then it starts the updat ing procedure If no update is available Blue amp Me Nav will display NO UPDATE AVAILABLE and say No update available Otherwise Blue amp Me Nav will complete the updating pro cedure In certain cases Blue amp Me Nav could say Update temporarily suspended System update will continue the next time you start the vehicle In other cases during the updating procedure the system may prompt to turn the ignition key to STOP and then to MAR When updating is over and available Blue amp Me Nav will display the message UPDATE COMPLETE and say Update completed Pausing the update Q Or aN To pause updatin
127. utomatically check the version of the SOFTWARE and or its components that you are utilizing and may pro vide upgrades or supplements to the SOFTWARE that may be automatically downloaded to your DEVICE BLUE amp ME nav BLUE amp ME nav 102 Additional Software Services The SOFTWARE may permit Fiat Auto S p A Fiat Auto S p A s Software Suppliers their affil iates and or their designated agent to provide or make available to you SOFTWARE updates supplements add on components or Internet based services components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE Sup plemental Components If Fiat Auto S p A provides or makes available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components then the terms of this EULA shall apply If Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent make available Supplemental Components and no other EULA terms are provided then the terms of this EULA shall apply except that the Fiat Auto S p A s Software Suppliers or affiliate entity providing the Supplemental Component s shall be the licensor of the Supplemental Component s Fiat Auto S p A Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent reserve the right to discon tinue any Internet based services provided to you or made available to you through the use of the
128. v plays a tone and it will ask if you would like to read it according to set signal types gt For information on signal types refer to paragraph Signal types Press SRC OK or MAIN and y Blue amp Me Nav will read the SMS text received The message will be read taking into account any abbre viation or emoticon contained in the text Otherwise press ESC Blue amp Me Nav will not read the message but it will store it so you can read the message later for further in formation refer to paragraph How to read the last SMS text re ceived 1 Or using voice interaction if you pronounce Yes Blue amp Me Nav will read the message taking in to account any abbreviation con tained in the text otherwise say No the system will store the message so you can read it later for further information refer to para graph How to read the last SMS text received HOW TO READ THE LAST SMS TEXT RECEIVED After receiving a message Blue amp Me Nav will store it both read or not read message in the inbox refer to paragraph Inbox A To read the last message received open Blue amp Me Nav Main menu and select option MESSAGE READER then press SRC OK or NMAIN Select the option READ LAST and press SRC OK or MAIN Blue amp Me Nav will read the last message received gt Or using voice interaction I Press and pronounce Read last one Blue amp Me Nav will read the text of
129. vice such function your USB device to Blue amp Me Nav 93 BLUE amp ME nav BLUE amp ME nav 94 Problem Probable Cause Possible Solution Displayed message NO PLAYLISTS FOUND Or Blue amp Me Nav says No playlist found Displayed message INVALID PLAYLIST Displayed message EMPTY PLAYLIST Or Blue amp Me Nav says Empty playlist Displayed message BAD MEDIA Indication on sound system display MEDIAPLAYER in absence of USB device connected to the car USB port No playlist is stored on the USB device connected Playlist is damaged or invalid O No media file is contained in the playlist C The wpl file is too large for Blue amp Me Nav memory capacity O The playlist does not contain references to media files on your USB device Digital audio file is damaged or invalid The USB device has been removed from the car USB port with the ignition key at STOP Build a playlist on your computer using your media file software and then copy it to your USB device Make sure the playlist is in m3u or wpl format O Build the playlist again following the instructions given in section BUILDING PLAYLISTS FOR Blue amp Me Nav PRACTICAL HINTS O If the problem persists delete the playlist from your USB device O Delete the playlist from your USB device or copy media files to the playlist using your media file software O Reduce the number of tracks
130. was paused be cause the ignition key has been turned to STOP the updating procedure will be resumed automatically Notes O Updates will be resumed automatical ly only if using the same mobile phone used for starting the updating proce dure O Blue amp Me Nav will pause automati cally the updating procedure if the paired mobile phone is no longer available or if updating is paused by the Service Cen tre if communication is stopped e g tunnels or if the system slows down too much its working speed Blue amp Me Nav will try to resume up dating at preset time intervals Should it be not possible to resume updating while driving updating will be resumed at next engine starting Olf you encounter difficulties with any of these operations consult section HANDS FREE KIT TROU BLESHOOT ING ADVANCED OPTIONS A To navigate to the ADVANCED OPTIONS menu using manual in teraction proceed as follows Press MAIN to open the Main Menu then select SETTINGS by pressing SRC OK or MAIN Select ADVANCED OPTIONS and then press SRC OK or N MAIN Or using voice interaction We Press pronounce Settings and then Advanced Options Within the ADVANCED OP TIONS menu you can access the SYSTEM CODE Note This code is an 8 digit number device ID which uniquely identifies the Blue amp Me Nav system installed on your car and can not be changed Accessing the device I
131. you release the button These services may not be available when the car is purchased to obtain information on availability and activation call Universal Freephone Number CIAOFIAT 0080034280000 or consult the dedicated area on www fiat com HANDS FREE KIT QUICK REFERENCE GUIDE To quickly get started with using the Blue amp Me Nav hands free kit with voice recognition and Bluetooth wire less technology O Prepare your mobile phone phonebook O Turn the ignition key to MAR O Try out the voice commands Pair your mobile phone O Make a phone call gt Instructions for each of the above func tions are given in the following paragraphs PREPARE YOUR MOBILE PHONE PHONEBOOK Before creating a pairing relationship between your mobile phone and Blue amp Me Nay you should make sure that you have contact entries in your mo bile phone phonebook so that you can use them with the hands free phone gt If your phonebook is empty quickly create several new entries for frequently dialled phone numbers For further details consult your mobile phone owner s man ual gt To enter properly contacts in your mo bile phone phonebook refer to section SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE IMPORTANT NOTES O The phonebook copied to Blue amp Me Nav can only be used when the cor responding mobile phone is paired O Entries stored in SIM card or mobile phone memory can be transferred to Blue

Blue&Me™ Nav

Contents

Download Pdf Manuals

Related Search

Related Contents

Blue&amp;Me&trade; Nav

Contents

Download Pdf Manuals

Related Search

Related Contents

Blue&Me™ Nav