Quick Start Guide
Contents
1. Strahlabweichung X Achse 6 15 Grad Y Achse 22 38 Grad Wellenlange 650 660nm Microvision offers a number of accessories that make using your ROV scanner easier and more efficient To order the accessory you want contact your reseller or contact Microvi sion at www microvision com barcode connected Scanner USB Cable Scanner Holster Control Bar Codes Scanner Serial Cable Scanner Boot Scanner Dock Serial and USB Page 13 You can use control bar codes to control how your scanner operates When you scan control bar codes they act as commands and tell the scanner what to do You can use the control bar codes on this page to clear all bar codes from the scanner memory or reset the scanner to its factory default settings For more information about control bar codes go to www microvision com barcode support Clear Bar Codes Restore Factory Settings Scanning Tips Make sure that the laser line is across the bar code you want to scan and than move the scanner to change the scan angle If you do not see the scanner laser line make sure that there are batteries in the scanner and the batteries have sufficient power Page 11 If your software program does not receive bar code data and you are using Scanner Wedge go to the Trace screen If you see bar codes on the Trace screen then your scanner is working If you do not see bar codes go to the Connections screen to make sure that your scanner is2. actions e Use the simple API SerialMagic Pro gives you the flexibility to work with software that runs on Windows Windows Mobile BlackBerry Palm and Symbian devices To learn more about getting more from your ROV scanner with SerialMagic go to www microvision com barcode connected Get full integration with Microvision Scanner SDK You can use Microvision Scanner SDK software development kit to fully integrate your ROV scanner into any product solution that requires a hand held scanner The Scanner SDK gives you control of all scanner functions gives you full management of scanner data and control of time and date stamps The Scanner SDK is available in Windows Windows Mobile and BlackBerry versions To learn more about fully integrating your ROV scanner into your software application go to www microvision com barcode connected Page 5 Connect ROV Scanner With Bluetooth You can connect your ROV Scanner with Bluetooth to your host computer or mobile device using a wireless connection Make sure you install the scanner batteries before you try to connect your ROV Scanner Wake up your ROV Scanner with Bluetooth Press and release the Scan button on your scanner to put the scanner in Discoverable Mode Your scanner is ready to connect when the blue LED double blinks every two seconds When your ROV Scanner with Bluetooth is connected to a host the blue LED blinks once every second Activate your ROV
3. connected and activated If you are using SerialMagic or a custom application please refer to the appropri ate user guide to find troubleshooting information Look for firmware updates at www microvision com barcode support Contact Microvision Product Support Telephone 1 866 333 3542 Email scannersupport microvision com On the Web For more information about using your scanner with Scanner Wedge go to www microvision http www microvision com barcode support com barcode connected Page 9
4. of profit cost of cover indirect incidental or consequential damages The warranty set forth herein does not cover and Manufacturer will have no obligations hereunder if any non conformance is caused in whole or in part by accident transportation neglect misuse alteration modification or enhancement of the products or incorporation interfacing attachment of any feature program or device to the products by a person or entity other than Manufacturer failure to provide a suitable installation environment use of the products for other than the specific purpose for which the products are designed or any use of the product not in accordance with the User Manual or other misuse or abuse of the product Microvision Inc 6222 185th Avenue NE Redmond WA 98052 Microvision and ROV are trademarks of Microvision Inc Windows and Windows Mobile are trademarks of Microsoft Corpora tion The Bluetooth word mark and logo are owned by the Bluetooth SIG Inc and any use of such marks by Microvision Inc is under license DA0120035 Rev A Class 1 Laser Product Prodotto Al Laser Di Classe 1 Klasse 1 Laserprodukt Laserprodukt Klasse 1 Luokka 1 Lasertuote Produto Laser Da Classe 1 Produit Laser De Classe 1 Producto Laser De La Clase 1 Laserprodukt Der Klasse 1 Laserprodukt Klass 1 EC tested to comply C with FCC Standards FOR HOME OR OFFICE USE COMPLIES WITH 21 CFR 1040 10 amp 1040 11 EXCEPT FOR DEVIATIONS PURSUANT TO L
5. 2 5cm Weight 2 50z 3 70z with batteries Radio Bluetooth class 2 2 0 compliant Page 12 Indicator Table ee Green LED Blue LED Beeper Bluetooth Discoverable 2 blinks every 2 seconds Bluetooth Connected 1 blink every 2 seconds Uploading 2 blinks every None second Upload Complete 1 blink 3 different beeps Low Battery after good 2 blinks 2 different scan or other error beeps be boop Dead Battery Double blinks 3 2 different times beeps 3 times be Page 10 boop Quick Start Guide ROV Scanner ROV Scanner with Bluetooth Install Batteries Use alkaline AAA batteries or NiMH rechargable AAA batteries in your scanner Please remove the batteries when you store your scanner for more than 30 days 1 Press the battery cover release button then slide and lift the battery cover 2 Insert the batteries as shown 3 To replace the battery cover make sure that the cover tabs fit into the cover slots and then slide the cover until it clicks into place Look for firmware updates at www microvision com barcode support Page 3 Connect With Confidence Get more with SerialMagic Pro Connect with SerialMagic Pro to get more from your ROV scanner SerialMagic captures bar code data and translates it into keyboard input but also gives you the power to e Set the target application e Add bar code data in spreadsheet columns e Use programmable
6. ASER NOTICE NO 50 DATED JULY 26 2001 CLASS 1 LASER PRODUCT Disposal Do not dispose of this product in unsorted municipal waste To dispose of this product contact seller Bar Code SN XXXX XXXX XXXX MANUFACTURED YYYY MM DD Laser Safety This device employs a laser Do not remove the cover or attempt to service this device due to the possibility of eye damage Laser Sicherhelt In das Gerat ist ein Laser eingebaut Nehmen Sie dei Abdeckung nicht ad und versuchen Sie nicht das Gerat zu reparieren Es besteht die Gefahr einer Augenverletzung Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazard ous laser radiation exposure Warnung Die Vomahme von Regelungen oder Einstellungen oder die Durchfuhrung con Verfahren die nicht in diesem Doku ment angegeben sind kann eine gefahrliche Einwirkung von Laserstrahlung zer Forge haben Scanner Features IS ROV Scanner ROV Scanner w Bluetooth Platform Windows Linux iDen Mac Windows Windows Mobile Pock et PC Mac BlackBerry Palm Symbian Nokia E series only UPC EAN JAN Code 39 Code 128 RSS Codabar Interleaved 2 of 5 Stores over 4 000 UPC A codes in non volatile memory 3 AAA alkaline batteries not included O 3 AAA NiMH rechargeable batteries not included Microvision proprietary MEMS based design Dimensions Length 4 5in 11 4cm Width 2in 5cm Height 1in
7. Limited Warranty Manufacturer warrants that this laser bar code scanner will be free of defects in material and workmanship for one 1 year from the date of shipment Manufacturer will at its option either repair replace or refund the purchase price paid by buyer for the defective Products Such repair replacement or refund shall be buyer s sole remedy in the event of Manufacturer s breach of this limited warranty Repaired or replaced parts or product may include new reconditioned or re manufactured parts and equipment at Manufacturer s option All costs associated with shipment to Manufacturer for warranty service including but not limited to freight duties insurance and customs fees are buyer s responsibility Manufacturer will pay the freight costs duties insurance customs and any other fees are buyer s responsibility associated with the return shipment to buyer The method of shipment will be at Manufacturer s discretion Repair or replacement of any parts or equipment does not extend the period of warranty provided for herein THIS LIMITED WARRANTY IS MANUFACTURER S ONLY WARRANTY MANUFACTURER DOES NOT GIVE WARRANTIES OF MERCHANTABILITY OR WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE To take advantage of this warranty buyer should contact the seller not Manufacturer Manufacturer does not warrant that the Product or associated soft ware will run error free or without interruptions Manufacturer is not liable for loss of data loss
8. Scanner with Bluetooth Specific instructions for connecting your ROV Scanner with Bluetooth vary by operating system and by software application Please refer to the appropriate user guide for specific connection instructions Page 7 The Right Scanner For The Right Job The Microvision ROV Scanner and ROV Scanner with Bluetooth give you a powerful combi nation of high performance durability and affordability Your Microvision scanner can be used many ways You can use your scanner right out of the box enhance your scanner with specific third party software applications or integrate your scanner into a custom application scan button scan window LED serial port battery door with optional Bluetooth radio Connect With Confidence You can connect with confidence using your ROV Scanner or ROV Scanner with Bluetooth cable or wireless real time or batch fixed location or roaming Microvision provides three levels of connectivity software for your scanner Scanner Wedge gives you a quick and easy way to use a scanner out of the box SerialMagic adds the power and flexibility of programmable actions and a simple API The Microvision SDK gives you the control to fully integrate a Microvision scanner into your software application Get going with Scanner Wedge You can use Scanner Wedge to connect your Microvision ROV Scanner and ROV Scanner with Bluetooth to a host computer or mobile device Scanner Wedge captures bar co
9. de data from your ROV Scanner translates the scanned bar code data into keyboard input then sends the keyboard data to a Windows Windows Mobile or BlackBerry device To learn more about no hassle connectivity with Windows Windows Mobile and BlackBerry devices go towww microvision com barcode connected Page 4 Connect ROV Scanner Cable You can connect your ROV Scanner to a host computer with a serial cable included or a USB cable sold separately If you turn off the host computer before connecting the scanner cable remember to turn the computer on to activate and use your scanner You can unplug your ROV Scanner from the cable and use it in batch mode to scan and save bar codes Then just reconnect and upload the bar codes to your host computer Before you use a serial cable or USB cable in serial mode make sure that your host application can communicate with the serial port so the application can receive bar code data You do not have to start a software application before you use the USB cable in keyboard mode Serial cable 1 Connect the serial cable to an available serial port on your host computer 2 Connect the other end of the serial cable to the serial port on your ROV Scanner USB cable 1 Connect the USB cable to an available USB port on your computer 2 Connect the other end of the USB cable to the serial port on your ROV Scanner Note The Microvision USB cable operates in two modes serial mode or k
10. eyboard mode In serial mode the USB cable emulates a serial cable In keyboard mode the USB cable sends bar codes as if they were typed on a keyboard For more information see the USB Cable Quick Start Guide Start Scanning Use the sample bar code on this page to perform your first scan with your ROV Scanner or ROV Scanner with Bluetooth If you use Scanner Wedge start Scanner Wedge and go to the Trace page before you begin to scan If you use SerialMagic iMagic Media Organizer eCell or another software program please read the appropriate user guide for information about preparing to scan 1 Point the scanner at the bar code on this page 2 Press and hold the Scan button and make sure that the red laser line appears 3 Aim the laser line so that it crosses the entire bar code The scanner beeps and the LED indicator flashes when the scan is successful 4 When you hear the scanner beep or see the LED indicator flash release the Scan button If you are using Scanner Wedge you should see the bar code 1234567 on the Trace page Minimize Scanner Wedge Open the software program you want to use put the insertion point where you want the scanned data and start to scan Sample Bar Code 1234567 Page 8 Regulatory Information UL Listed to U S and Canadian standards FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may
11. n the antenna of this device and all persons This transmitter must not be collocated or operat ing in conjunction with any other antenna or transmitter CAUTION Changes or modifications to this equipment not expressly approved by manufacturer could void the user s authority to operate this equipment Notice for Canada Radio Interference Notice for Canada This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Complies with 21 CFR 1040 10 and 1040 11 except for deviations pursuant to Laser Notice No 50 dated July 26 2001 Compliance Information Product Name ROV Laser Bar Code Scanner Product Number MS2200 Options All The product herewith complies with the requirements of Low Voltage Directive 73 23 EEC EMC Directive 89 336 EEC WEEE Directive 2002 96 EC and carries the CE mark accordingly Product Name ROV Cordless Laser Bar Code Scanner Product Number MS2200 BT Options All The product herewith complies with the re quirements of R amp TTE Directive 99 5 EC WEEE Directive 2002 96 EC and carries the CE mark accordingly The equipment also carries the Class 2 equipment identifier ce Laser Type Semiconductor laser AlGalnP Maximum output power 5mW Divergence X axis 6 15 degrees Y axis 22 38 degrees Wavelength 650 660nm Laser Typ Halbleiterlaser AlGalnP Ausgabeleistung 5 mW
12. not cause harmful interference 2 this device must accept any interference received including interference that may cause undesired opera tions This applies to all product options FCC Radio Frequency Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio com munications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interfer ence to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Accessories Increase the separation between the equip ment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help To comply with FCC RF exposure compliance requirements a separation distance of at least 20 cm must be maintained betwee
Download Pdf Manuals
Related Search