STRIKE 324 User Manual Rev. 4
Contents
1. 9 COM Ol ODOM 9 mii es 0 9 DMX dee 9 DM eene RCRUM 9 0 612 mote 10 AUO Progra or dat ged cals a 10 AWO 10 MEE D EM 10 Sowar CS 10 i us c 10 EAC CMU ce ET 10 11 DMX Se deja a Was Saws ad ca cama eae Sea ae a eee AEDs 12 DNA m 13 2 ICONS 14 5 Technical InrormalloD abuela er en a nt EE esta aa 15 grey 15 REUS Sr Hc Ar M 15 6 LL 16 US ER TETTE 17 STRIKE 324 User Manual Rev 4 1 NOTES ii STRIKE 324 User Ma2. 000 U 010 No function 011 U 040 JAuto 0 041 U 070 Auto 1 071 U 100 Auto 2 101 U 130 Auto 131 U 160 4 161 U 190 5 191 U 220 Auto6 255 Auto 7 Auto Programs Auto Speed 000 0 255 0 100 000 U 005 function 0060 255 0 25 Hz Percent Setting Slow to fast 000 U 295 Only when Ch 9 has Auto 0 7 activated STRIKE 324 User Manual Rev 4 Technical Information 5 Technical Information Product Maintenance Returns STRIKE 324 User Manual Rev 4 To maintain optimum performance and minimize wear you should clean this product frequently Usage and environment are contributing factors in determining the cleaning frequency As a rule clean this product at least twice a month Dust build up reduces light output performance and can cause overheating This can lead to reduced light source life and increased mechanical wear To clean your product 1 Unplug the product from power 2 Wait until the product is at room temperature Use a vacuum or dry compressed air and a soft brush to remove dust collected on the external vents 4 Clean all external surfaces with a mild solution of non ammonia glass cleaner or isopropyl alcohol 5 Apply the solution directly to a soft lint free cotton cloth or a lens cleaning tissue 6 Wipe any dirt or grime to the outside edges of the lens surface 7 Gently polish the lens surfaces until they ar
3. Edition Notes Edition Notes Trademarks Copyright Notice Manual Use Document Printing Intended Audience Disclaimer Document Revision HAVE PROFESSIONAL The STRIKE 324 User Manual Rev 4 covers the description safety precautions installation programming operation and maintenance of the STRIKE 324 Chauvet released this edition of the STRIKE 324 User Manual in April 2015 CHAUVETO is a registered trademark of CHAUVET amp Sons Inc d b a CHAUVET or Chauvet The CHAUVET logo in its entirety including the CHAUVET name and the dotted triangle and all other trademarks in this manual pertaining to services products or marketing statements are owned or licensed by Chauvet Any other product names logos brands company names and other trademarks featured or referred to within this document are the property of their respective trademark holders Chauvet owns the content of this User Manual in its entirety including but not limited to pictures logos trademarks and resources Copyright 2015 Chauvet All rights reserved Electronically published by Chauvet in the United States of America Chauvet authorizes its customers to download and print this manual for professional information purposes only Chauvet expressly prohibits the usage copy storage distribution modification or printing of this manual or its content for any other purpose without written consent from Chauvet For better
4. C HT Herm 1 a 1 SAAE T EEEE EE EI EEE E LM MM E E EL put MUR LL 1 NE 0 1 wii Aet T 2 Personal Ma eet MUNI MEI 2 Mounting and FIG QING 52 Or 0 tn din dei 2 ODE 2 DCU OS nal oc a ecce 2 Expected LED LISA dep 2 3 3 REC LE SR 3 TM 4 DIMENSIONS 5 3 EE EP 6 e RR THE ce 6 MN ee ce nie cho een ne 6 PUSS ReDIAC MENE ESS RS Ec 6 74 EM RT UT ccn 7 Maslen Slave Ole CVE ci Ann cob nace Cet EUN 7 MOUNINO 0 8 8 ROON PI 8 A DODSIallob 9 Control Panel UU UU
5. housing during operation because it may be very hot This product is for indoor use only IP20 To prevent risk of fire or shock do not expose this product to rain or moisture CAUTION When transferring product from extreme temperature environments e g cold truck to warm humid ballroom condensation may form on the internal electronics of the product To avoid causing a failure allow product to fully acclimate to the surrounding environment before connecting it to power Mount this product in a location with adequate ventilation at least 20 in 50 cm from adjacent surfaces Make sure there are no flammable materials close to this product while it is operating When hanging this product always secure to a fastening device using a safety cable Use caution when loosening the barrel rotation knobs If these knobs become too loose the barrel assembly may inadvertently separate from the reflector housing Always make sure you are connecting this product to the proper voltage in accordance with the specifications in this manual or on the product s specification label To eliminate unnecessary wear and improve its lifespan during periods of non use completely disconnect the product from power via breaker or by unplugging it Never connect this product to a dimmer pack or rheostat Never disconnect this product by pulling or tugging on the power cable Do not operate this product if you see damage on the housing lenses or cables Have the damaged
6. parts replaced by an authorized technician at once Do not cover the ventilation slots when operating to avoid internal overheating The maximum ambient temperature is 113 F 45 Do not operate this product at a higher temperature In case of a serious operating problem stop using this product immediately In the unlikely event that your Chauvet product may require service contact Chauvet Technical Support LEDs gradually decline in brightness over time mostly because of heat Packaged in clusters LEDs exhibit higher operating temperatures than in ideal single LED conditions For this reason using clustered LEDs at their fullest intensity significantly reduces the LEDs lifespan Under normal conditions this lifespan can be 40 000 to 50 000 hours If extending this lifespan is vital lower the operating temperature by improving the ventilation around the product and reducing the ambient temperature to an optimal operating range In addition limiting the overall projection intensity may also help to extend the LEDs lifespan STRIKE 324 User Manual Rev 4 2 Introduction Description Features STRIKE 324 User Manual Rev 4 Introduction The STRIKE 324 combines 324 cool white SMD 5739 LEDs with a cast housing to create a strobe for touring and production applications The body houses an 8 segment LED array and 5 pin DMX connections and Neutrik powerCON in and out easy operation and connection The All On fea
7. 4 is running 1 Goto the Info main level 2 Select Version and the version number will show on the screen This option shows the internal temperature of the STRIKE M 324 Go to the Temp xx C main level This setting allows you to set the amount of time the backlight on the STRIKE M 324 stays on after the last button is pressed on the control panel 1 Goto the BackLite main level 2 Select On remains on 10S 10 seconds 20S 20 seconds or 30S 30 seconds 3 Press ENTER STRIKE 324 User Manual Rev 4 Main Level Auto Static BackLite Info Address Channel M amp S Mode Operation Programming Levels Description Auto 0 7 Speed 001 100 8 automatic programs Dimmer Sets the intensity of the light output Strobe Selects the strobe frequency 210686 amount of time the control pane OS O Auto 7 Sets product in test mode Version Vx x Shows the installed software version 001 512 Sets product s DMX address channel strobe 5Ch J 5 channel intensity duration rate effect macro 8 Ch 8 channel Flash 1 8 12 channel Flash 1 8 auto programs auto 12 Ch speed dimmer strobe Master Selects Master mode Slave Selects Slave mode Temp Displays product s internal temperature STRIKE 324 User Manual Rev 4 Operation DMX Values 1Ch Channel Function Value Percent Setting m DENTS 5Ch Channel F
8. des detailed instructions on how to configure the master and slaves you are not familiar with or need more information about DMX standards Master Slave connectivity or the DMX cables needed to link this product to a DMX controller download the DMX Primer from the Chauvet website www chauvetprofessional com Setup Mounting Orientation Rigging Procedure Mounting Diagram Before mounting this product read and follow the Safety Notes For our CHAUVET Professional line of mounting clamps go to http trusst com products Always mount this product in a safe position and make sure there is adequate room for ventilation configuration and maintenance The STRIKE 324 consists of a double yoke bracket and the body of the product Chauvet recommends using the following general guidelines when mounting this product When selecting an installation location consider easy access to this product for operation programming adjustments and routine maintenance Make sure to mount this product away from any flammable material as indicated in the Safety Notes Never mount in places where rain high humidity extreme temperature changes or restricted ventilation may affect the product hanging this product make sure that the mounting location can support the product s weight See the Technical Specifications for the weight bearing requirements of this product When hanging this product always sec
9. e Chauvet website www chauvetprofessional com Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire To eliminate unnecessary wear and improve its lifespan during periods of non use completely disconnect the product from power via breaker or by unplugging it Never connect this product to a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel serves only as a 0 to 100 switch The STRIKE 324 comes with a NEUTRIK powerCON A connector on one end and an Edison plug on the other end US market If the power cord adapter that came with your product has no plug or you need to change the Edison plug use the table below to wire the new plug Connection Wire U S Wire Europe Screw Color AC Live Brown Yellow or Brass AC Neutral Silver AC Ground Green Yellow Green Yellow Green Make sure to disconnect the product s power cord before replacing a blown fuse Always replace the blown fuse with another of the same type and rating 1 Disconnect this product from the power outlet 2 Using a flat head screwdriver unscrew the fuse holder cap from the housing 3 Remove the blown fuse and replace with another fuse of the same type and rating T 3 15 A 250 V 4 Screw the fuse holder cap back in place and reconnect power STRIKE 324 User Manual Rev 4 Power Linking DMX Linking DMX Modes Master Slave Conn
10. e free of haze and lint Always dry the external surfaces thoroughly and carefully after cleaning them You must send the product prepaid in the original box and with the original packing and accessories Chauvet will not issue call tags Call Chauvet and request a Return Merchandise Authorization RMA number before shipping the product Be prepared to provide the model number serial number and a brief description of the cause s for the return Clearly label the package with an RMA number Chauvet will refuse any product returned without an RMA number DO NOT write the RMA number directly on the box Instead write it on a properly affixed label Once you have received the RMA number include the following information on a piece of paper inside the box Your name Your address Your phone number The RMA number A brief description of the problem s Be sure to pack the product properly Any shipping damage resulting from inadequate packaging will be the customers responsibility FedEx packing or double boxing recommended Chauvet reserves the right to use its own discretion to repair or replace returned product s Technical Information Technical Specifications Dimensions and Length Weight 9 06 in 230 mm Width 3 74 in 95 mm HAVI PROFESSIONAL Height 9 80 in 249 mm Weight 6 20 Ib 2 8 kg Note Dimensions in inches rounded to the nearest decimal digit Power Power Supply Type Switc
11. e to comply with this information may cause the product not to work damage third party equipment or cause harm to the operator Important installation or configuration information Failure to comply with this information may keep the product from working Useful information The term DMX used throughout this manual refers to the USITT DMX512 A digital data transmission protocol Auto Programs Auto Ranging Power Supply User Serviceable DU 79 79 Safety Notes A D Personal Safety Mounting and Rigging Power and Wiring Operation Expected LED Lifespan Read all the following Safety Notes before working with this product These notes include important information about the installation usage and maintenance of this product This product contains no user serviceable parts Any reference to servicing in this User Manual will only apply to properly trained Chauvet certified technicians Do not open the housing or attempt any repairs All applicable local codes and regulations apply to proper installation of this product Avoid direct eye exposure to the light source while the product is on CAUTION Flashing light is known to trigger epileptic seizures User must comply with local laws regarding notification of strobe use Always disconnect this product from its power source before servicing Always connect this product to a grounded circuit to avoid the risk of electrocution Do not touch this product s
12. ectivity D STRIKETM 324 User Manual Rev 4 Setup The STRIKE 324 supports power linking You can power link up to 11 products at 120 V 19 at 208 V or 21 at 230 V This product comes with a power input cord A power linking cable is available from Chauvet for purchase You can link the STRIKE 324 to a DMX controller using a standard DMX serial connection If using other DMX compatible products with the STRIKE 324 you can control each individually with a single DMX controller The STRIKE 324 uses the standard DMX data connection for the 1 5 8 and 12 channel DMX modes Refer to the Introduction chapter for a brief description of these modes Refer to the Operation chapter to learn how to configure the STRIKE 324 to work in these modes The DMX Values section provides you with detailed information regarding the DMX modes The Master Slave mode allows a STRIKE 324 the master to control one or more STRIKE 324s the slaves without a DMX controller One STRIKE 324 becomes the master when running an Auto or Custom program or by being in Static mode You must configure each slave s control panel to operate in Slave mode During Master Slave operation the slaves will operate in unison with the master DO NOT connect a DMX controller to products operating in Master Slave mode The DMX controller signals may interfere with the signals from the master The Operation section of this manual provi
13. ght HAVI PROFESSIONAL The Static mode allows the user to set the intensity and the strobe frequency from the control panel without a DMX controller 1 Goto the Static main level 2 Select Dimmer Choose desired intensity 000 255 3 Select Strobe Select the desired strobe frequency 000 255 Auto programs allow for control of pre programmed strobe looks without a DMX controller 1 Goto the Auto main level 2 Select the desired auto Auto 0 7 3 Select Speed 4 Choose the desired speed value 000 100 You cannot edit any of the auto programs Auto 0 7 This option allows you to test all the LEDs on the STRIKE 324 1 Goto Info main level 2 Select Auto Test The Master Slave mode allows a group of STRIKE 324s the slaves to simultaneously duplicate the output of another STRIKE 324 the master without a DMX controller 1 Seteach of the slaves a Go to the M amp S Mode main level b Select Slave 2 Setthe master product a Goto the M amp S Mode main level b Select Master c Select an Auto or Static program as explained in Auto Programs The master is the one that runs a program whether in Auto or Static mode Do not connect a DMX controller to the products configured for Master Slave operation The DMX controller may interfere with signals from the master product The master should be the first product in the daisy chain This option shows what version of software the STRIKE 32
14. hing internal Parameter Consumption Operating Power linking current products Fuse Power Power input connector Power output connector Power cord plug Light Source Type LED Color Cool White Photometrics Parameter 5 m Beam angle Field angle Thermal Max External Temperature 113 F 45 DMX I O Connectors 3 and 5 pin XLR Ordering Product Name STRIKE 324 Range 100 to 240 VAC 50 60 Hz Voltage Selection Auto ranging 120 V 60 Hz 230 V 50 Hz 145 W 144 W 1 21 A 62 A 13 6 11 products 13 6 21 products T 3 15 A 250 V T 3 15 A 250 V U S Worldwide Europe Neutrik powerCON A Neutrik powerCON A Neutrik powerCON B Neutrik powerCON B Edison U S Local plug Power Lifespan 1W 50 000 hours Quantity Current 324 250 mA Standard Optics 206 120 120 Cooling System Convection Connector Type Channel Range Sockets 1 5 2 Item Code UPC Number 03050778 781462211264 ROHS STRIKE 324 User Manual Rev 4 CHAUVET User Manual WORLD HEADQUARTERS Chauvet Contact Us General Information Technical Support Address 5200 NW 108th Avenue Voice 954 577 4455 Press 4 Sunrise FL 33351 Fax 954 756 8015 Voice 954 577 4455 Email tech chauvetlighting com Fax 954 929 5560 Toll free 800 762 1084 World Wide Web www chauvetlighting com UNITED KINGDOM AND IRELAND Chauvet Europe Ltd General Informatio
15. is will take you to the first programming level for that option To select an option or value within the current programming level press UP lt DOWN gt until the option shows the display Press lt gt to select In this case if there is another programming level you will see that first option or you will see the selected value Press lt gt repeatedly to exit to the previous main level This setting allows you to choose a particular DMX personality 1 Goto the Channel main level 2 Select the desired personality 1 Ch 5 Ch 8 Ch or 12 Ch see the DMX Values section for the highest starting address you can select for each personality Make sure that the starting addresses on the various products do not overlap due to the new personality setting In this mode each product will respond to a unique starting address from the DMX controller All products with the same starting address will respond in unison 1 Select a DMX personality as shown in DMX Personality 2 Set the running mode a Goto the M amp S Mode main level b Select Slave Set the starting address a Goto the Address main level b Select the starting address 001 512 The highest recommended starting address for each DMX mode is as follows DMX Mode DMX Address 1 Ch 512 5 Ch 508 8 Ch 505 12 Ch 501 Operation Static Operation Auto Programs Auto Test Master Slave Software Information Temperature Backli
16. n Technical Support Address Unit 1C Email uktech chauvetlighting com Brookhill Road Industrial Estate Pinxton Nottingham UK World Wide Web www chauvetlighting co uk NG16 6NT Voice 44 0 1773 511115 Fax 44 0 1773 511110 MEXICO Chauvet Mexico General Information Technical Support Address Av Santa Ana 30 Email servicio chauvet com mx Parque Industrial Lerma Lerma Mexico C P 52000 World Wide Web www chauvet com mx Voice 52 728 285 5000 CHAUVET EUROPE Chauvet Europe BVBA General Information Technical Support Address Stokstraat 18 Email Eutech chauvetlighting eu 9770 Kruishoutem Belgium World Wide Web www chauvetlighting eu Voice 32 9 388 93 97 Outside the U S United Kingdom Ireland Mexico or Benelux contact the dealer of record Follow their instructions to request support or to return a product Visit our website for contact details STRIKE 324 User Manual Rev 4
17. nual Rev 4 Before You Begin 1 Before You Begin What is Included STRIKE 324 Neutrik powerCON power cord Warranty card Quick Reference Guide Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition the box or the contents the product and included accessories appear damaged from shipping or show signs of mishandling notify the carrier immediately not Chauvet Failure to report damage to the carrier immediately may invalidate your claim In addition keep the box and contents for inspection For other issues such as missing components or parts damage not related to shipping or concealed damage file a claim with Chauvet within 7 days of delivery Claims Manual Conventions Convention Meaning 1 512 A range of values in the text 50 60 A set of mutually exclusive values in the text lt SET gt A button on the product s control panel Settings A product function or a menu option MENU gt Settings sequence of menu options 1 10 A range of menu values from which to choose in a menu Yes No A set of two mutually exclusive menu options in a menu ON A unique value to be entered or selected in a menu Symbols Symbols Meaning A Product at a Glance Use on Dimmer Outdoor Use Sound Activated DMX Master Slave STRIKE 324 User Manual Rev 4 X Replaceable Fuse P Critical installation configuration or operation information Failur
18. results print this document in color on letter size paper 8 5 x 11 in double sided If using A4 paper 210 x 297 mm configure your printer to scale the content accordingly Any person in charge of installing operating and or maintaining this product should completely read through the guide that shipped with the product as well as this manual before installing operating or maintaining this product Chauvet believes that the information contained in this manual is accurate in all respects However Chauvet assumes no responsibility for any errors or omissions in this document Chauvet reserves the right to revise and make changes to the content of this document without obligation that Chauvet notify any person or company of such revision or changes This does not in any way constitute a commitment by Chauvet to make such changes Chauvet may issue a revision of this manual or a new edition to incorporate such changes The STRIKE 324 User Manual Rev 4 supersedes all previous versions of this manual Discard any older versions of this manual and replace with this version Go to www chauvetlighting com download pro for the latest version Author Date Editor Date Updated D Couppe 4 1 15 M Trouard 4 9 15 STRIKE 324 User Manual Rev 4 Table of Contents UN Sis fellow S 1 Oeo oT NE NEU T 1 SUC ARTT enmt
19. ture allows the STRIKE 324 to be used as a flood light in addition to being a strobe fixture 1 5 8 or 12 channel LED wash product Operating modes 1 channel strobe 5 channel intensity duration rate effect macro 8 channel flash 1 8 12 channel flash 1 8 auto programs auto speed dimmer strobe 8 segment control for ultimate strobe design Multiple modes of DMX control for ease of use Master Slave control 3 pin and 5 pin DMX Neutrik powerCON in out Combine pixel control and special effect macros for stunning visual impact Rugged die cast housing for touring and production introduction ME Overview Double Yoke Bracket DMX In DMX Out Control Panel Power In I Power Out Safety Cable Loop Fuse Holder li 0 Adjustment Knob Side View he STRIKE 324 User Manual Rev 4 Dimensions i a c NEN STRIKE 324 User Manual Rev 4 5 Setup 3 Setup AC Power Fuse Replacement HAVI PROFESSIONAL Each STRIKE 324 has an auto ranging power supply that works with an input voltage range of 100 to 240 VAC 50 60 Hz To determine the power requirements for each STRIKE 324 refer to the label affixed to the product You can also refer to the Technical Specifications chart in this manual The listed current rating indicates the maximum current draw during normal operation For more information you may download Sizing Circuit Breakers from th
20. unction Value Percent Setting 0 2 000 U 255 0 100 0060 No function Ramp up Ramp down Ramp up ramp down Random Lighting effect Spike effect 000 U 005 function 006 U 042 Macro 1 043 U 085 Macro 2 5 Pixel Control Macros 086 U 128 Macro 3 129U 171 Macro 4 1720 214 5 2150 255 6 4 Special Effects To achieve blinder effects similar to a discharge strobe light put channels 1 2 and 3 to 100 A STRIKE 324 User Manual Rev 4 DMX Values cont 8Ch Channel 1 Function Value 000 U 005 function 006 U 255 Slow to fast 2 000 005 No function 006 U 255 Slow to fast 3 000 U 005 function 006 U 255 Slow to fast 4 000 U 005 function 006 U 255 Slow to fast 5 000 U 005 No function 006 U 255 Slow to fast 6 000 U 005 function 006 U 255 Slow to fast 000 U 005 No function 006 255 Slow to fast 000 U 005 No function Ring 006 0 255 Slow to fast Ring 1 STRIKE 324 User Manual Rev 4 Percent Setting Operation Operation DMX Values cont 12Ch Channel 1 2 10 11 12 14 Value 006 U 255 Slow to fast 006 U 255 Slow to fast 006 U 255 Slow to fast 006 U 255 Slow to fast Function 000 U 005 function 006 U 255 Slow to fast 000 U 005 function 006 U 255 Slow to fast 000 005 No function 006 0 255 Slow to fast 000 005 No function 006 255 Slow to fast
21. ure to a fastening device using a safety cable The STRIKE 324 comes with a double yoke bracket to which you can either attach mounting clamps for hanging or simply use as a floor stand You must supply your own mounting clamps Make sure the clamps are capable of supporting the weight of this product Use at least one mounting point per product Mounting Clamp lt v 5 Safety Cable Floor Mounting Overhead Mounting STRIKE 324 User Manual Rev 4 4 Operation Control Panel Description Control Options Programming DMX Personality DMX Control STRIKE 324 User Manual Rev 4 Operation Button Function lt MENU gt Exits from the current menu or function lt ENTER gt Enables the currently displayed menu or sets the currently selected value in to the current function lt UP gt Navigates upward through the menu list and increases the numeric value when in a function lt DOWN gt Navigates downward through the menu list and decreases the numeric value when in a function You can set the STRIKE 324 starting address in the 001 512 DMX range This enables control of up to 42 products in the 12 channel 12 Ch personality Refer to the Menu Map to understand the menu options The menu map shows the main level and a variable number of programming levels for each option To go to the desired main level press MENU repeatedly until the option shows on the display Press lt gt to select Th
Download Pdf Manuals
Related Search