SOLAR GUTTER LIGHT INSTRUCTION MANUAL
Contents
1. 3 ithas human body induction motion sensor with less than 60 times one night after the induction it gives full light each 45 seconds later it turns to energy saving mode the induction distant is 6 8M induction angle is 90 for full light 2 O E itii i Wea Dia 23 8mm self tapping screws Dia 3 25mm self tapping 2 Alum Mounting bracket Figure 2 Figure 3 Two ways Product installation first elected a perfect installation position insert the alum bracket into gap in the lamp as Figure 3 with 3 8 screws to fix the backet in to lamp And with M5 30mm thumb screws to secure fix the bracket in the gutter First selected a perfect installation position insert the alum bracket into gap in the lamp as Figure 2 use 3 25 screws screws to fix the bracket and lamp 3 25mm_ Expansion particles screws to secure fix the bracket on gutter Product maintenance to ensure that the product works well every 3 months need to cleaning the dust on the solar panels make solar panels daylighting effect is better ensure the solar panel charge the battery every day The service life of the product The service life of the product design the service life of the solar panels for 5 years the light source for 5 years the controller for 5 years lithium battery for 1 5 years the machine service life for five years IMPORTANT 1 Install the solar product in an area whe2. SOLAR GUTTER LIGHT INSTRUCTION MANUAL MODEL NO YH0416A PIR READ THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND INSTALLATION FIRST TIME USE Remove the protective film from the solar panel before the first use Turn the switch to ON position And place the lamp under sunshine for at least 3 to 4 hours before first time use The power of lamp may run out during the long time transportation PRODUCT FEATURES 1 Solar rechargeable energy for led lighting Green and environmentally and power saving 2 Auto charge in day time and auto lighting in the night 3 Easy install and widely use INSTRUCTIONS This unit has intelligent light control switch automatic control products daily work when the ray of light is more than 100LUX solar panels will charge the battery And when the night falls or ray of light is lower than 100 10LUX this lamp will automatic light no need human operate any more 1 Turn the switch to ON position The switch is located at the bottom base of the solar panel as Figure 1 j Charge the solar product by placing it under direct sunshine for at least 4 hours 2 The light will work automatically once the switch is in ON position It will automatically charge under direct sunshine in the day time and illuminate at night NOTE In order to verify that the knob is correctly switched to ON aie cover the solar panel with your hand and the light will turn ON automatically 3
3. re it can get directsunlight 2 Select an outdoor location away from other light source at night such as street lights It may cause the product not to turn on automatically at night 3 Duration of light depends on solar product s level of sunshine exposure geographical locations weather conditions and the hours of daylight MAINTENANCE TROUBLE SHOOTING AND BATTERY REPLACEMENT 1 In order to ensure the normal maintenance work clean up the dust on the solar panels every 3 months 2 If solar product does not light up after it has been used for around 8 12 months replace the rechargeable batteries as they may be weak or worn out Lithium battery 1pcs AA 3 7v 800 Mah Lithium battery or same equivalent type as recommended must be used 3 Exercise caution when replacing batteries Loosen the fours crews in lamp corners and open it carefully replace the old battery with a new one Battery must be recycled or disposed of properly don t dispose batteries in fire or trash Contact your town or city s recycling center to find out how to properly dispose batteries Made in China
Download Pdf Manuals
Related Search